The DOI matches its Crossref record; 103 of the 103 references it cites were found in a registry or an index.
A review on voids of 3D printed parts by fused filament fabrication
Open accessAbstract
Fused filament fabrication (FFF), also known as fused deposition modeling (FDM™), is considered one of the most promising additive manufacturing (AM) methods for its versatility, reliability and affordability. First adopted by industries for professional uses such as rapid prototyping, then by the general public in recent years, FFF has gathered itself considerable attention. Nevertheless, despite key advancements in printer technologies and filament materials, the fabrication of robust, performing and functional parts for high-demanding practical applications remains a significant challenge. Due to intrinsic deficiencies, such as the presence of voids and weak layer-to-layer adhesion, FFF-printed parts are plagued by weak and anisotropic mechanical properties in contrast to their conventionally manufactured counterparts. With the increasing demand for designable porous structures in the fields of biomedicine, 4D printing and lightweight cellular composites, understanding the challenges presented by void presence has become more relevant than ever. As existing literature has reviewed the significance of interlayer bonding, this review focuses on documenting recent insights on the formation of voids by its categorization, research method and mechanism. The primary objective is to provide a comprehensive understanding of the two current primary methods of void research—quantitative analysis and imaging. Detailed discussions on the effects of feedstock and printing parameters on void formation are also presented. Lastly, this review discusses gaps in the current research and outlines unaddressed challenges regarding void formation and its relation with the mechanical performance of FFF parts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Ning, F., Cong, W., Qiu, J., Wei, J., & Wang, S. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.06.013 · Cited by 1,718
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
Highly oriented carbon fiber–polymer composites via additive manufacturing
Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, C. E., Love, L. J., Naskar, A. K., Blue, C. A., & Ozcan, S. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.10.009 · Cited by 1,514
Mohamed, O. A., Masood, S. H., & Bhowmik, J. L. (2015) · Advances in Manufacturing · doi:10.1007/s40436-014-0097-7 · Cited by 1,481
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process
Bellehumeur, C., Li, L., Sun, Q., & Gu, P. (2004) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(04)70071-7 · Cited by 768
Fused filament fabrication of fiber-reinforced polymers: A review
Brenken, B., Barocio, E., Favaloro, A., Kunc, V., & Pipes, R. B. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.01.002 · Cited by 737
Review of additive manufacturing technologies and applications in the aerospace industry
Najmon, J. C., Raeisi, S., & Tovar, A. (2019) · Additive Manufacturing for the Aerospace Industry · doi:10.1016/b978-0-12-814062-8.00002-9 · Cited by 719
A critical review on the fused deposition modeling of thermoplastic polymer composites
Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 704
Multi‐Material 3D and 4D Printing: A Survey
Rafiee, M., Farahani, R. D., & Therriault, D. (2020) · Advanced Science · doi:10.1002/advs.201902307 · Cited by 662
Mechanical characterization of parts fabricated using fused deposition modeling
Bellini, A., & Güçeri, S. (2003) · Rapid Prototyping Journal · doi:10.1108/13552540310489631 · Cited by 628
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2009) · Materials & Design · doi:10.1016/j.matdes.2009.04.030 · Cited by 626
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2012) · Journal of Advanced Research · doi:10.1016/j.jare.2011.05.001 · Cited by 576
Daminabo, S. C., Goel, S., Grammatikos, S. A., Nezhad, H. Y., & Thakur, V. K. (2020) · Materials Today Chemistry · doi:10.1016/j.mtchem.2020.100248 · Cited by 567
Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques
Dawoud, M., Taha, I., & Ebeid, S. J. (2016) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2015.11.002 · Cited by 566
Additively manufactured carbon fiber-reinforced composites: State of the art and perspective
van de Werken, N., Tekinalp, H., Khanbolouki, P., Ozcan, S., Williams, A., & Tehrani, M. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100962 · Cited by 566
Shanmugam, V., Das, O., Babu, K., Marimuthu, U., Veerasimman, A., Johnson, D. J., Neisiany, R. E., Hedenqvist, M. S., Ramakrishna, S., & Berto, F. (2021) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.106007 · Cited by 538
Recent developments in polymers/polymer nanocomposites for additive manufacturing
Wu, H., Fahy, W. P., Kim, S., Kim, H., Zhao, N., Pilato, L., Kafi, A., Bateman, S., & Koo, J. H. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100638 · Cited by 531
3D printing of wood fibre biocomposites: From mechanical to actuation functionality
Le Duigou, A., Castro, M., Bevan, R., & Martin, N. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.018 · Cited by 523
Recent Advances in Extrusion‐Based 3D Printing for Biomedical Applications
Placone, J. K., & Engler, A. J. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701161 · Cited by 486
Christ, J. F., Aliheidari, N., Ameli, A., & Pötschke, P. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.011 · Cited by 481
Liu, Z., Wang, Y., Wu, B., Cui, C., Guo, Y., & Yan, C. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03332-x · Cited by 469
Wang, P., Zou, B., Xiao, H., Ding, S., & Huang, C. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.016 · Cited by 458
Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
Rahim, T. N. A. T., Abdullah, A. M., & Md Akil, H. (2019) · Polymer Reviews · doi:10.1080/15583724.2019.1597883 · Cited by 452
Experimental design in chromatography: A tutorial review
Hibbert, D. B. (2012) · Journal of Chromatography B · doi:10.1016/j.jchromb.2012.01.020 · Cited by 449
Prediction of surface roughness in extrusion-based additive manufacturing with machine learning
Li, Z., Zhang, Z., Shi, J., & Wu, D. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.01.004 · Cited by 432
Self-citationFused filament fabrication of polymer materials: A review of interlayer bond
Gao, X., Qi, S., Kuang, X., Su, Y., Li, J., & Wang, D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101658 · Cited by 418
Optimization of fused deposition modeling parameters for improved PLA and ABS 3D printed structures
Abeykoon, C., Sri-Amphorn, P., & Fernando, A. (2020) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2020.03.003 · Cited by 417
Structural quality of parts processed by fused deposition
Agarwala, M. K., Jamalabad, V. R., Langrana, N. A., Safari, A., Whalen, P. J., & Danforth, S. C. (1996) · Rapid Prototyping Journal · doi:10.1108/13552549610732034 · Cited by 406
Experimental design and response surface methodology in energy applications: A tutorial review
Mäkelä, M. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.09.021 · Cited by 392
Mechanical behavior of acrylonitrile butadiene styrene fused deposition materials modeling
Matas, J. F. R., Thomas, J. P., & Renaud, J. E. (2003) · Rapid Prototyping Journal · doi:10.1108/13552540310489604 · Cited by 388
Current status and future directions of fused filament fabrication
Singh, S., Singh, G., Prakash, C., & Ramakrishna, S. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.049 · Cited by 385
Development and Application of Wood Flour-Filled Polylactic Acid Composite Filament for 3D Printing
Tao, Y., Wang, H., Li, Z., Li, P., & Shi, S. Q. (2017) · Materials · doi:10.3390/ma10040339 · Cited by 360
Self-citationGarzon-Hernandez, S., Garcia-Gonzalez, D., Jérusalem, A., & Arias, A. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108414 · Cited by 350
3D printing technologies: techniques, materials, and post-processing
Karakurt, I., & Lin, L. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.04.001 · Cited by 346
Additive Manufacturing for the Aerospace Industry
(2019) · Elsevier eBooks · doi:10.1016/c2017-0-00712-7 · Cited by 331
Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)
Wang, L., Gramlich, W. M., & Gardner, D. J. (2017) · Polymer · doi:10.1016/j.polymer.2017.03.011 · Cited by 310
Composite Modeling and Analysis for Fabrication of FDM Prototypes with Locally Controlled Properties
Li, L., Sun, Q., Bellehumeur, C. T., & Gu, P. (2002) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(02)70139-4 · Cited by 306
Das, A., Gilmer, E. L., Biria, S., & Bortner, M. J. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01228 · Cited by 305
Omar, O. M., MOHAMED, M., SyedH., Masood, ., & Bhowmik (2015) · Acta Scientiarum Naturalium Universitatis Sunyatseni · Cited by 302
Akhoundi, B., & Behravesh, A. H. (2019) · Experimental Mechanics · doi:10.1007/s11340-018-00467-y · Cited by 297
Weld formation during material extrusion additive manufacturing
Seppala, J. E., Hoon Han, S., Hillgartner, K. E., Davis, C. S., & Migler, K. B. (2017) · Soft Matter · doi:10.1039/c7sm00950j · Cited by 291
Process-structure-property effects on ABS bond strength in fused filament fabrication
Abbott, A. C., Tandon, G. P., Bradford, R. L., Koerner, H., & Baur, J. W. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.002 · Cited by 291
Gurrala, P. K., & Regalla, S. P. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.913400 · Cited by 290
Modification of Frenkel's model for sintering
Pokluda, O., Bellehumeur, C. T., & Vlachopoulos, J. (1997) · AIChE Journal · doi:10.1002/aic.690431213 · Cited by 281
The importance of rheological behavior in the additive manufacturing technique material extrusion
Mackay, M. E. (2018) · Journal of Rheology · doi:10.1122/1.5037687 · Cited by 266
Invited review: Machine learning for materials developments in metals additive manufacturing
Johnson, N. S., Vulimiri, P. S., To, A. C., Zhang, X., Brice, C. A., Kappes, B. B., & Stebner, A. P. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101641 · Cited by 231
Semi-crystalline feedstock for filament-based 3D printing of polymers
Vaes, D., & Van Puyvelde, P. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101411 · Cited by 231
Aliheidari, N., Christ, J., Tripuraneni, R., Nadimpalli, S., & Ameli, A. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.001 · Cited by 230
Spoerk, M., Arbeiter, F., Cajner, H., Sapkota, J., & Holzer, C. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45401 · Cited by 227
Characterization of the mesostructure of fused‐deposition acrylonitrile‐butadiene‐styrene materials
Rodriguez, J. F., Thomas, J. P., & Renaud, J. E. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337056 · Cited by 226
Investigation of infill-patterns on mechanical response of 3D printed poly-lactic-acid
Aloyaydi, B. A., Sivasankaran, S., & Mustafa, A. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106557 · Cited by 208
Bond and part strength in fused deposition modeling
Coogan, T. J., & Kazmer, D. O. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2016-0050 · Cited by 206
Machine learning in predicting mechanical behavior of additively manufactured parts
Nasiri, S., & Khosravani, M. R. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.004 · Cited by 202
Influence of meso-structure and chemical composition on FDM 3D-printed parts
Alaimo, G., Marconi, S., Costato, L., & Auricchio, F. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.01.019 · Cited by 199
3D printing to enable multifunctionality in polymer-based composites: A review
Bekas, D. G., Hou, Y., Liu, Y., & Panesar, A. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107540 · Cited by 194
Coupling machine learning with 3D bioprinting to fast track optimisation of extrusion printing
Ruberu, K., Senadeera, M., Rana, S., Gupta, S., Chung, J., Yue, Z., Venkatesh, S., & Wallace, G. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2020.100914 · Cited by 172
Multi-material, multi-technology FDM: exploring build process variations
Espalin, D., Alberto Ramirez, J., Medina, F., & Wicker, R. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2012-0112 · Cited by 171
Pu’ad, N. A. S. M., Haq, R. H. A., Noh, H. M., Abdullah, H. Z., Idris, M. I., & Lee, T. C. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.05.535 · Cited by 168
Peterson, A. M. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.03.030 · Cited by 167
Healing simulation for bond strength prediction of FDM
Coogan, T. J., & Kazmer, D. O. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2016-0051 · Cited by 166
Raster angle mechanics in fused deposition modelling
Huang, B., & Singamneni, S. (2014) · Journal of Composite Materials · doi:10.1177/0021998313519153 · Cited by 163
Numerical simulations of the mesostructure formation in material extrusion additive manufacturing
Serdeczny, M. P., Comminal, R. B., Pedersen, D. B., & Spangenberg, J. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.05.024 · Cited by 160
An investigation on sliding wear of FDM built parts
Sood, A. K., Equbal, A., Toppo, V., Ohdar, R., & Mahapatra, S. S. (2011) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2011.08.003 · Cited by 155
Guessasma, S., Belhabib, S., & Nouri, H. (2019) · Polymers · doi:10.3390/polym11071220 · Cited by 151
Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock
Xiao, X., Chevali, V. S., Song, P., Dongning, H., & Wang, H. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107887 · Cited by 147
Bayraktar, Ö., Uzun, G., Çakıroğlu, R., & Güldaş, A. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3960 · Cited by 145
von Koch, C. F. R., Hulle, L. V., & Rudolph, N. M. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.06.003 · Cited by 145
An Analysis of Mechanisms Governing Fusion Bonding of Thermoplastic Composites
Butler, C. A., McCullough, R. L., Pitchumani, R., & Gillespie, J. W. (1998) · Journal of Thermoplastic Composite Materials · doi:10.1177/089270579801100404 · Cited by 144
Yang, D., Zhang, H., Wu, J. Y., et al. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101686 · Cited by 144
Wang, L., & Gardner, D. J. (2017) · Polymer · doi:10.1016/j.polymer.2017.02.055 · Cited by 126
Kaveh, M., Badrossamay, M., Foroozmehr, E., & Etefagh, A. H. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.07.012 · Cited by 118
Levenhagen, N. P., & Dadmun, M. (2018) · Polymer · doi:10.1016/j.polymer.2018.01.031 · Cited by 114
Bimodal molecular weight samples improve the isotropy of 3D printed polymeric samples
Levenhagen, N. P., & Dadmun, M. (2017) · Polymer · doi:10.1016/j.polymer.2017.06.057 · Cited by 113
Guessasma, S., Belhabib, S., & Nouri, H. (2019) · Polymers · doi:10.3390/polym11111778 · Cited by 112
Structure–mechanical property relationship in fused deposition modelling
Rezayat, H., Zhou, W., Siriruk, A., Penumadu, D., & Babu, S. S. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000010 · Cited by 107
Liu, Y., Zhang, W., Zhang, F., Leng, J., Pei, S., Wang, L., Jia, X., Cotton, C., Sun, B., & Chou, T. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107692 · Cited by 106
Moradi, M., Aminzadeh, A., Rahmatabadi, D., & Rasouli, S. A. (2021) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-021-05848-4 · Cited by 94
Microstructure, Thermal and Mechanical Behavior of 3D Printed Acrylonitrile Styrene Acrylate
Guessasma, S., Belhabib, S., & Nouri, H. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800793 · Cited by 91
Advances in fused deposition modeling of discontinuous fiber/polymer composites
Hu, C. Q., & Qin, Q. (2020) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2020.100867 · Cited by 87
Pugliese, D., Bella, F., Cauda, V., Lamberti, A., Sacco, A., Tresso, E. M., & Bianco, S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am403527m · Cited by 83
Influence of temperature on polymer parts manufactured by fused deposition modeling process
Bhalodi, D. V., Zalavadiya, K. S., & Gurrala, P. K. (2019) · Journal of the Brazilian Society of Mechanical Sciences and Engineering · doi:10.1007/s40430-019-1616-z · Cited by 83
Waste office paper filled polylactic acid composite filaments for 3D printing
Tao, Y., Liu, M., Han, W., & Li, P. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108998 · Cited by 77
Self-citationEffect of process parameters on parts quality and process efficiency of fused deposition modeling
Galetto, M., Verna, E., & Genta, G. (2021) · Computers & Industrial Engineering · doi:10.1016/j.cie.2021.107238 · Cited by 72
Heat distribution in material during fused deposition modelling
Wolszczak, P., Łygas, K., Paszko, M., & Wach, R. A. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2017-0062 · Cited by 69
VOLCO: A predictive model for 3D printed microarchitecture
Gleadall, A., Ashcroft, I., & Segal, J. I. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.04.004 · Cited by 69
Guessasma, S., Belhabib, S., & Nouri, H. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.50162 · Cited by 67
Mohamed, O. A., Masood, S. H., & Bhowmik, J. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2015-0198 · Cited by 60
Gao, X., Qi, S., Zhang, D., Su, Y., & Wang, D. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101414 · Cited by 60
Ko, Y. S., Herrmann, D., Tolar, O., Elspass, W. J., & Brändli, C. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100815 · Cited by 57
Mohamed, O. A., Masood, S. H., & Bhowmik, J. (2016) · Advances in Production Engineering & Management · doi:10.14743/apem2016.3.223 · Cited by 50
The role of heating and cooling in viscous sintering of pairs of spheres and pairs of cylinders
Polychronopoulos, N. D., & Vlachopoulos, J. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2019-0162 · Cited by 43
Fused deposition modeling with polyamide 1012
Gao, X., Zhang, D., Wen, X., Qi, S., Su, Y., & Dong, X. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2018-0258 · Cited by 42
Maqsood, N., & Rimašauskas, M. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.06.095 · Cited by 40
Wang, L., Palmer, J., Tajvidi, M., Gardner, D. J., & Han, Y. (2018) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-018-7759-9 · Cited by 38
Cited by
Ghorbani, J., Koirala, P., Shen, Y.-L., & Tehrani, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.06.026 · Cited by 115
Ahmed, R., Dola, I. S., Ahmed, S., Rahman, M. M., Shanto, T. A., & Taylor, R. (2026) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-026-18078-6 · Cited by 6
Ilhan, R., Gumus, O. Y., & Lekesiz, H. (2026) · Polymer Composites · doi:10.1002/pc.70459 · Cited by 5
Metadata
- Authors
- Tao, Y., Kong, F., Li, Z., Zhang, J., Zhao, X., Yin, Q., Xing, D., & Li, P.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2021-11
- Volume
- 15
- Pages
- 4860-4879
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W3209394607
- Cited by
- 443
- References
- 103
- FWCI
- 18.03
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.