The DOI matches its Crossref record; 134 of the 134 references it cites were found in a registry or an index.
Selection of thermal management system for modular battery packs of electric vehicles: A review of existing and emerging technologies
Abstract
Abstract Li-ion battery cells are temperature sensitive devices. Their performance and cycle life are compromised under extreme ambient environment. Efficient regulation of cell temperature is, therefore, a pre-requisite for safe and reliable battery operation. In addition, modularity-in-design of battery packs is required to offset high manufacturing costs of electric vehicles (EVs). However, modularity of battery packs is restricted by flexibility of traditionally used battery thermal management systems. For example, scalability of liquid cooled battery packs is limited by plumbing or piping and the auxiliary equipment used in the system. An alternative thermal management system is, therefore, required for modular EV battery packs. In this paper, state-of-the-art developed to control battery temperature near a pre-specified state is qualitatively reviewed with the intent to identify potential candidate for implementation in a modular architecture. Some of the novel techniques that provide high-scalability in addition to appreciable cost and energy-savings over traditional methods are also evaluated while considering the development state and associated technical risks. It is found that only a hybrid system can meet technical requirements imposed by modular design. Based on the current state, phase change materials and thermoelectric devices are more likely to be part of this next generation thermal management system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Linden, D. (2001) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,900
Abuse behavior of high-power, lithium-ion cells
Spotnitz, R., & Franklin, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00488-3 · Cited by 1,373
A review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
Fan, L., & Khodadadi, J. M. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.08.007 · Cited by 1,003
Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity
Mahamud, R., & Park, C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.02.076 · Cited by 787
Zhao, C. Y., Lu, W., & Tian, Y. (2010) · Solar Energy · doi:10.1016/j.solener.2010.04.022 · Cited by 757
The low temperature performance of Li-ion batteries
Zhang, S. S., Xu, K., & Jow, T. R. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00618-3 · Cited by 712
Investigation of power battery thermal management by using mini-channel cold plate
Huo, Y., Rao, Z., Liu, X., & Zhao, J. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.015 · Cited by 712
A review of hazards associated with primary lithium and lithium-ion batteries
Lisbona, D., & Snee, T. (2011) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2011.06.022 · Cited by 701
Sabbah, R., Kizilel, R., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.03.082 · Cited by 680
A Novel Thermal Management System for Electric Vehicle Batteries Using Phase-Change Material
Hallaj, S. A., & Selman, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393888 · Cited by 662
A review on battery thermal management in electric vehicle application
Xia, G., Cao, L., & Bi, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.046 · Cited by 641
Li-Ion Cell Operation at Low Temperatures
Ji, Y., Zhang, Y., & Wang, C.-Y. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.047304jes · Cited by 640
Thermal conductivity enhancement of phase change materials using a graphite matrix
Mills, A., Farid, M., Selman, J. R., & Al-Hallaj, S. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2005.11.022 · Cited by 627
Preparation and thermal characterization of paraffin/metal foam composite phase change material
Xiao, X., Zhang, P., & Li, M. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.050 · Cited by 627
Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling
Qian, Z., Li, Y., & Rao, Z. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.08.063 · Cited by 626
Richard, M. N., & Dahn, J. R. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391893 · Cited by 601
Agyenim, F., Eames, P., & Smyth, M. (2009) · Solar Energy · doi:10.1016/j.solener.2009.04.007 · Cited by 596
Design optimization of electric vehicle battery cooling plates for thermal performance
Jarrett, A., & Kim, I. Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.090 · Cited by 560
Review on research of room temperature magnetic refrigeration
Yu, B. F., Gao, Q., Zhang, B., Meng, X., & Chen, Z. (2003) · International Journal of Refrigeration · doi:10.1016/s0140-7007(03)00048-3 · Cited by 559
Graphene-enhanced hybrid phase change materials for thermal management of Li-ion batteries
Goli, P., Legedza, S., Dhar, A., Salgado, R., Renteria, J., & Balandin, A. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.135 · Cited by 547
Fan, L., Khodadadi, J. M., & Pesaran, A. A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.050 · Cited by 534
Study on paraffin/expanded graphite composite phase change thermal energy storage material
Zhang, Z., & Fang, X. (2006) · Energy Conversion and Management · doi:10.1016/j.enconman.2005.03.004 · Cited by 518
A design of air flow configuration for cooling lithium ion battery in hybrid electric vehicles
Park, H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.102 · Cited by 497
Experimental investigation on thermal management of electric vehicle battery with heat pipe
Rao, Z., Wang, S., Wu, M., Lin, Z., & Li, F. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.08.014 · Cited by 486
Heating strategies for Li-ion batteries operated from subzero temperatures
Ji, Y., & Wang, C. Y. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.03.147 · Cited by 485
Wu, W., Yang, X., Zhang, G., Chen, K., & Wang, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.02.022 · Cited by 455
Thermal modeling and design considerations of lithium-ion batteries
Al Hallaj, S., Maleki, H., Hong, J. S., & Selman, J. R. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00178-0 · Cited by 454
Phase-change materials (PCM) for automotive applications: a review
Jaguemont, J., Omar, N., Van den Bossche, P., & Mierlo, J. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.097 · Cited by 451
Li, W. Q., Qu, Z. G., He, Y. L., & Tao, Y. B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.006 · Cited by 416
Khateeb, S. A., Amiruddin, S., Farid, M., Selman, J. R., & Al-Hallaj, S. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.09.033 · Cited by 410
Khateeb, S. A., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.070 · Cited by 405
Jiaqiang, E., Han, D., Qiu, A., Zhu, H., Deng, Y., Chen, J., Zhao, X., Zuo, W., Wang, H., Chen, J., et al. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.115 · Cited by 404
Li, W. Q., Qu, Z. G., He, Y. L., & Tao, W. Q. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.11.001 · Cited by 396
Ultra-thin minichannel LCP for EV battery thermal management
Jin, L. W., Lee, P. S., Kong, X. X., Fan, Y., & Chou, S. K. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.07.013 · Cited by 393
Coupled electrochemical thermal modelling of a novel Li-ion battery pack thermal management system
Basu, S., Hariharan, K. S., Kolake, S. M., Song, T., Sohn, D. K., & Yeo, T. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.08.049 · Cited by 389
Thermal management of a Li-ion battery using carbon fiber-PCM composites
Babapoor, A., Azizi, M., & Karimi, G. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.068 · Cited by 380
Heat dissipation design for lithium-ion batteries
Wu, M.-S., Liu, K. H., Wang, Y.-Y., & Wan, C.-C. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00048-4 · Cited by 373
Liang, J., Gan, Y., & Li, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.10.063 · Cited by 367
Zhou, D., & Zhao, C. Y. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.11.022 · Cited by 366
Electrolytes for Low‐Temperature Lithium Batteries Based on Ternary Mixtures of Aliphatic Carbonates
Smart, M. C., Ratnakumar, B. V., & Surampudi, S. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391633 · Cited by 339
Rao, Z., Wang, S., & Zhang, G. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.07.009 · Cited by 322
Novel thermal management system using mist cooling for lithium-ion battery packs
Saw, L. H., Poon, H. M., Thiam, H. S., Cai, Z., Chong, W. T., Pambudi, N. A., & King, Y. J. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.04.042 · Cited by 314
Ling, Z., Chen, J., Fang, X., Zhang, Z., Xu, T., Gao, X., & Wang, S. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.01.075 · Cited by 311
Prevent thermal runaway of lithium-ion batteries with minichannel cooling
Xu, J., Lan, C., Qiao, Y., & Ma, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.08.151 · Cited by 308
Kizilel, R., Lateef, A., Sabbah, R., Farid, M. M., Selman, J. R., & Al-Hallaj, S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.04.050 · Cited by 301
Hussain, A., Abidi, I. H., Tso, C. Y., Chan, K. C., Luo, Z., & Chao, C. Y. H. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.09.019 · Cited by 293
Lafdi, K., Mesalhy, O., & Shaikh, S. (2007) · Journal of Applied Physics · doi:10.1063/1.2802183 · Cited by 291
The elevated temperature performance of the LiMn2O4/C system: failure and solutions
Amatucci, G., Du Pasquier, A., Blyr, A., Zheng, T., & Tarascon, J.-M. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00209-1 · Cited by 288
Wang, W., Yang, X., Fang, Y., Ding, J., & Yan, J. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.10.020 · Cited by 287
Arora, S., Shen, W., & Kapoor, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.013 · Cited by 277
Self-citationHuang, Q., Li, X., Zhang, G., Zhang, J., He, F., & Li, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.048 · Cited by 276
Structural optimization of lithium-ion battery pack with forced air cooling system
Xie, J., Ge, Z., Zang, M., & Wang, S. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.143 · Cited by 271
Zhao, J., Lv, P., & Rao, Z. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.11.017 · Cited by 270
Lin, C., Xu, S., Chang, G., & Liu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.068 · Cited by 263
Diagnostic examination of thermally abused high-power lithium-ion cells
Abraham, D. P., Roth, E. P., Kostecki, R., McCarthy, K., MacLaren, S., & Doughty, D. H. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.04.088 · Cited by 261
Putra, N., Ariantara, B., & Pamungkas, R. A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.01.123 · Cited by 257
Electrical characteristics of 18650 Li-ion cells at low temperatures
Nagasubramanian, G. (2001) · Journal of Applied Electrochemistry · doi:10.1023/a:1004113825283 · Cited by 254
Simulation of passive thermal management system for lithium-ion battery packs
Mills, A., & Al-Hallaj, S. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.09.025 · Cited by 254
Drake, S. J., Martin, M., Wetz, D. A., Ostanek, J. K., Miller, S. P., Heinzel, J. M., & Jain, A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.008 · Cited by 249
Low-Temperature Behavior of Li-Ion Cells
Lin, H.-P., Chua, D., Salomon, M., Shiao, H.-C., Hendrickson, M., Plichta, E., & Slane, S. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1368736 · Cited by 248
Thermal conductivity measurement of a PCM based storage system containing carbon fibers
Frusteri, F., Leonardi, V., Vasta, S., & Restuccia, G. (2005) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2004.10.007 · Cited by 242
A review of emerging technologies for food refrigeration applications
Tassou, S. A., Lewis, J. S., Ge, Y. T., Hadawey, A., & Chaer, I. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2009.09.001 · Cited by 241
Development of a theoretically based thermal model for lithium ion battery pack
Zhu, C., Li, X., Song, L., & Xiang, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.035 · Cited by 238
Research on the heat dissipation performance of battery pack based on forced air cooling
Xu, X. M., & He, R. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.004 · Cited by 237
Modeling thermal management of lithium-ion PNGV batteries
Nelson, P., Dees, D., Amine, K., & Henriksen, G. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00197-0 · Cited by 234
Numerical investigation of a PCM-based heat sink with internal fins: Constant heat flux
Shatikian, V., Ziskind, G., & Letan, R. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2007.11.036 · Cited by 230
Al-Zareer, M., Dincer, I., & Rosen, M. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.067 · Cited by 228
Hussain, A., Tso, C. Y., & Chao, C. Y. H. (2016) · Energy · doi:10.1016/j.energy.2016.09.008 · Cited by 227
Lithium-Ion Electrolytes Containing Ester Cosolvents for Improved Low Temperature Performance
Smart, M. C., Ratnakumar, B. V., Chin, K. B., & Whitcanack, L. D. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3501236 · Cited by 220
Abe, K., Yoshitake, H., Kitakura, T., Hattori, T., Wang, H., & Yoshio, M. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.05.016 · Cited by 219
Hong, S., Zhang, X., Chen, K., & Wang, S. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.09.092 · Cited by 218
Wang, Q., Rao, Z., Huo, Y., & Wang, S. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.11.005 · Cited by 213
A low-temperature electrolyte for lithium and lithium-ion batteries
Plichta, E. J., & Behl, W. K. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00367-0 · Cited by 210
Li, X., He, F., & Ma, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.04.073 · Cited by 210
Alrashdan, A., Mayyas, A. T., & Al-Hallaj, S. (2010) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.07.011 · Cited by 209
Numerical study on the thermal performance of a composite board in battery thermal management system
Yan, J., Wang, Q., Li, K., & Sun, J. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.05.187 · Cited by 202
Ling, Z., Wen, X., Zhang, Z., Fang, X., & Gao, X. (2018) · Energy · doi:10.1016/j.energy.2017.12.098 · Cited by 202
Structure optimization of parallel air-cooled battery thermal management system
Chen, K., Wang, S., Song, M., & Chen, L. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.04.026 · Cited by 201
Giuliano, M. R., Prasad, A. K., & Advani, S. G. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.05.074 · Cited by 194
MacNeil, D. D., Larcher, D., & Dahn, J. R. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392520 · Cited by 184
HEV battery heating using AC currents
Stuart, T. A., & Hande, A. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.10.014 · Cited by 182
State-of-Health Estimation of Li-ion Batteries: Cycle Life Test Methods
Groot, J. (2012) · Chalmers Publication Library (Chalmers University of Technology) · Cited by 177
Charge and discharge characteristics of a commercial LiCoO2-based 18650 Li-ion battery
Zhang, S. S., Xu, K., & Jow, T. R. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.037 · Cited by 175
Metal foam embedded in SEBS/paraffin/HDPE form-stable PCMs for thermal energy storage
Chen, P., Gao, X., Wang, Y., Xu, T., Fang, Y., & Zhang, Z. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.12.041 · Cited by 175
Mortazavi, B., Yang, H., Mohebbi, F., Cuniberti, G., & Rabczuk, T. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.175 · Cited by 175
Low-temperature performance of Li-ion cells with a LiBF4-based electrolyte
Zhang, S., Xu, K., & Jow, T. (2003) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-002-0300-9 · Cited by 171
Wu, W., Wu, W., & Wang, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.09.068 · Cited by 169
Mohammadian, S. K., He, Y., & Zhang, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.055 · Cited by 165
Analysis of Optimal Heat Transfer in a PEM Fuel Cell Cooling Plate
Chen, F. C., Gao, Z., Loutfy, R. O., & Hecht, M. (2003) · Fuel Cells · doi:10.1002/fuce.200330112 · Cited by 160
Yang, B., Zhang, H., Yu, L., Fan, W., & Huang, D. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.10.037 · Cited by 156
Thompson, S. M., Aspin, Z. S., Shamsaei, N., Elwany, A. H., & Bian, L. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.09.003 · Cited by 154
An Approach for Designing Thermal Management Systems for Electric and Hybrid Vehicle Battery Packs
Pesaran, A. A., Keyser, M. A., & Burch, S. D. (1999) · University of North Texas Digital Library (University of North Texas) · Cited by 153
Thermal management of batteries employing active temperature control and reciprocating cooling flow
He, F., & Ma, L. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.11.079 · Cited by 146
A novel method for manufacturing sintered aluminium heat pipes (SAHP)
Ameli, M., Agnew, B., Leung, P., Ng, B., Sutcliffe, C. J., Singh, J. P. N., & McGlen, R. J. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.12.011 · Cited by 136
Experimental study on heat dissipation for lithium-ion battery based on micro heat pipe array (MHPA)
Ye, X., Zhao, Y., & Quan, Z. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.141 · Cited by 136
Situ, W., Zhang, G., Li, X., Yang, X., Wei, C., Rao, M., Wang, Z., Wang, C., & Wu, W. (2017) · Energy · doi:10.1016/j.energy.2017.09.083 · Cited by 134
A Novel Thermal Management for Electric and Hybrid Vehicles
Alaoui, C., & Salameh, Z. M. (2005) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2004.842444 · Cited by 129
Wang, H., Wang, F., Li, Z., et al. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.050 · Cited by 129
Experimental and numerical investigation of core cooling of Li-ion cells using heat pipes
Shah, K., McKee, C., Chalise, D., & Jain, A. (2016) · Energy · doi:10.1016/j.energy.2016.07.076 · Cited by 122
Thermal conductivity enhancement of ethylene glycol and water with graphene nanoplatelets
Selvam, C., Lal, D. M., & Harish, S. (2016) · Thermochimica Acta · doi:10.1016/j.tca.2016.09.002 · Cited by 121
Cooling and Preheating of Batteries in Hybrid Electric Vehicles
Pesaran, A. A., Vlahinos, A. S., & Stuart, T. A. (2003) · Cited by 117
LiBOB as Additive in LiPF[sub 6]-Based Lithium Ion Electrolytes
Xu, K., Zhang, S. S., & Jow, T. R. (2005) · Electrochemical and Solid-State Letters · doi:10.1149/1.1924930 · Cited by 115
Effects of SEI on the kinetics of lithium intercalation
Ratnakumar, B., Smart, M., & Surampudi, S. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00682-6 · Cited by 114
ETTOUNEY, H. M., Alatiqi, I. M., Al-Sahali, M., & Al-Hajirie, K. (2005) · Energy Conversion and Management · doi:10.1016/j.enconman.2005.04.003 · Cited by 112
Electrolytes for advanced batteries
Blomgren, G. E. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00188-3 · Cited by 104
Bahiraei, F., Fartaj, A., & Nazri, G. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.09.084 · Cited by 98
Smart, M., Lucht, B., Dalavi, S., Krause, F. C., & Ratnakumar, B. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.058206jes · Cited by 95
Low-Temperature Characterization of Lithium-Ion Carbon Anodes via Microperturbation Measurement
Wang, C.-S., Appleby, A., & Little, F. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1474427 · Cited by 90
New Li-ion electrolytes for low temperature applications
Herreyre, S., Huchet, O., Barusseau, S., Perton, F., Bodet, J., & Biensan, P. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00670-x · Cited by 88
New covalent salts of the 4+V class for Li batteries
Niedzicki, L., Grugeon, S., Laruelle, S., Judeinstein, P., Bukowska, M., Prejzner, J., Szczeciński, P., Wieczorek, W., & Armand, M. B. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.030 · Cited by 84
A rechargeable lithium-ion battery module for underwater use
Pendergast, D. R., DeMauro, E. P., Fletcher, M., Stimson, E., & Mollendorf, J. C. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.071 · Cited by 80
Ibrahim, O. T., Monroe, J. G., Thompson, S. M., Shamsaei, N., Bilheux, H., Elwany, A. H., & Bian, L. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.12.063 · Cited by 79
Development and evaluation of a new ammonia boiling based battery thermal management system
Al‐Zareer, M., Dinçer, İ., & Rosen, M. A. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.05.093 · Cited by 75
Nakaso, K., Teshima, H., Yoshimura, A., Nogami, S., Hamada, Y., & Fukai, J. (2007) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2007.02.001 · Cited by 74
Energy savings and increased electric vehicle range through improved battery thermal management
Smith, J., Hinterberger, M., Schneider, C., & Koehler, J. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.12.034 · Cited by 74
Energy Efficient Battery Heating in Cold Climates
Vlahinos, A. S., & Pesaran, A. A. (2002) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2002-01-1975 · Cited by 72
Petibon, R., Harlow, J., Le, D., & Dahn, J. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2014.12.084 · Cited by 72
Arora, S., Shen, W., & Kapoor, A. (2017) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2017.02.044 · Cited by 72
Self-citationLi, S.-Y., Zhao, W., Zhou, Z.-F., Cui, X.-L., Shang, Z., Liu, H., & Zhang, D.-Q. (2014) · ACS Applied Materials and Interfaces · doi:10.1021/am405973x · Cited by 65
Arora, S., Kapoor, A., & Shen, W. (2018) · Batteries · doi:10.3390/batteries4030030 · Cited by 64
Self-citationMiranda, A. G., Chen, T. S., & Hong, C. (2013) · Energy · doi:10.1016/j.energy.2013.07.013 · Cited by 62
He, F., Wang, H., & Ma, L. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.07.069 · Cited by 60
Key factors for the cycling stability of graphite intercalation electrodes for lithium-ion batteries
Joho, F., Rykart, B., Imhof, R., Novák, P., Spahr, M. E., & Monnier, A. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00195-0 · Cited by 59
Mechanical Design and Packaging of Battery Packs for Electric Vehicles
Arora, S., & Kapoor, A. (2018) · Green energy and technology · doi:10.1007/978-3-319-69950-9_8 · Cited by 55
Self-citationArora, S., Kapoor, A., & Shen, W. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.030 · Cited by 55
Self-citationCarbonate Free Electrolyte for Lithium Ion Batteries Containing γ-Butyrolactone and Methyl Butyrate
Lazar, M. L., & Lucht, B. L. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0601506jes · Cited by 47
Feasibility study on thermoelectric device to energy storage system of an electric vehicle
Suh, I.-S., Cho, H., & Lee, M. (2014) · Energy · doi:10.1016/j.energy.2014.08.040 · Cited by 40
Environmental motivation to switch to thermoacoustic refrigeration
Zink, F., Vipperman, J. S., & Schaefer, L. A. (2009) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2009.07.008 · Cited by 38
Arora, S., Shen, W., & Kapoor, A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.062 · Cited by 23
Self-citationKuruneru, S. T. W., Sauret, E., Saha, S. C., & Gu, Y. (2018) · Chemical Engineering Science · doi:10.1016/j.ces.2018.01.006 · Cited by 22
Cited by
A review of safety strategies of a Li-ion battery
Chombo, P. V., & Laoonual, Y. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228649 · Cited by 596
A review on recent progress, challenges and perspective of battery thermal management system
Lin, J., Liu, X., Li, S., Zhang, C., & Yang, S. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120834 · Cited by 588
Hu, X., Zheng, Y., Howey, D. A., Perez, H., Foley, A., & Pecht, M. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100806 · Cited by 443
Research progress on power battery cooling technology for electric vehicles
Lu, M., Zhang, X., Ji, J., Xu, X., & Zhang, Y. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101155 · Cited by 434
Akbarzadeh, M., Kalogiannis, T., Jaguemont, J., Jin, L., Behi, H., Karimi, D., Beheshti, H., Van Mierlo, J., & Berecibar, M. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117503 · Cited by 431
Metadata
- Authors
- Arora, S.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 400
- Pages
- 621-640
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W2890124471
- Cited by
- 315
- References
- 134
- FWCI
- 12.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.