The DOI matches its Crossref record; 108 of the 108 references it cites were found in a registry or an index.
Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights
Open accessAbstract
X-ray tomography has emerged as a uniquely powerful and non-destructive tool to analyze defects in additive manufacturing. Defects include unintended porosity, rough surfaces and deviations from design, which can have different root causes and can vary significantly among samples. Powder material properties, non-uniform delivery of the powder layer, deformation during manufacturing, deviations from optimal process-parameters caused by changes in the laser beam, the optical components and the scanning system operation, may result in lack of fusion pores, metallurgical pores, keyhole pores, etc. These different types of pores have different typical sizes, shapes and 3D distributions. All types of defects have effects on the mechanical properties of a final part. The use of X-ray tomography to visualize pores in parts (non-destructively) prior to mechanical testing has allowed us to improve our understanding of the effect of this porosity on the mechanical properties of the part (also referred to as “effect of defect”). This can provide the possibility to discriminate critical defects from harmless ones, and thereby build confidence in additive manufacturing processes. This paper reviews the current state of knowledge with regard to the “effect of defect” in metal additive manufacturing, and highlights some relevant examples from our recent work.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
King, W. E., Barth, H. D., Castillo, V. M., Gallegos, G. F., Gibbs, J. W., Hahn, D. E., Kamath, C., & Rubenchik, A. M. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.005 · Cited by 1,616
Cnudde, V., & Boone, M. N. (2013) · Earth-Science Reviews · doi:10.1016/j.earscirev.2013.04.003 · Cited by 1,572
Metal fatigue : effects of small defects and nonmetallic inclusions
村上, 敬. (2002) · Elsevier eBooks · Cited by 1,457
Maire, E., & Withers, P. J. (2014) · International Materials Reviews · doi:10.1179/1743280413y.0000000023 · Cited by 1,374
Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions
MURAKAMI, Y. (2002) · Cited by 1,150
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
Cunningham, R., Zhao, C., Parab, N., Kantzos, C., Pauza, J., Fezzaa, K., Sun, T., & Rollett, A. D. (2019) · Science · doi:10.1126/science.aav4687 · Cited by 1,066
Gong, H., Rafi, K., Gu, H., Starr, T., & Stucker, B. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.002 · Cited by 1,038
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Gong, H., Rafi, K., Gu, H., Janaki Ram, G. D., Starr, T., & Stucker, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.147 · Cited by 940
Current and future trends in topology optimization for additive manufacturing
Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., et al. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1994-3 · Cited by 870
In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
Leung, C. L. A., Marussi, S., Atwood, R. C., Towrie, M., Withers, P. J., & Lee, P. D. (2018) · Nature Communications · doi:10.1038/s41467-018-03734-7 · Cited by 817
Fundamental aspects of hot isostatic pressing: An overview
Atkinson, H. V., & Davies, S. (2000) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-000-0078-2 · Cited by 784
Zhao, C., Fezzaa, K., Cunningham, R. W., Wen, H., De Carlo, F., Chen, L., Rollett, A. D., & Sun, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-03761-2 · Cited by 758
Dynamics of pore formation during laser powder bed fusion additive manufacturing
Martin, A. A., Calta, N. P., Khairallah, S. A., Wang, J., Depond, P. J., Fong, A. Y., Thampy, V., Guss, G. M., Kiss, A. M., Stone, K. H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10009-2 · Cited by 711
Computed tomography for dimensional metrology
Kruth, J. P., Bartscher, M., Carmignato, S., Schmitt, R., De Chiffre, L., & Weckenmann, A. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.05.006 · Cited by 684
Industrial applications of computed tomography
De Chiffre, L., Carmignato, S., Kruth, J.-P., Schmitt, R., & Weckenmann, A. (2014) · CIRP Annals · doi:10.1016/j.cirp.2014.05.011 · Cited by 670
Overview of Materials Qualification Needs for Metal Additive Manufacturing
Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J. (2016) · JOM · doi:10.1007/s11837-015-1810-0 · Cited by 630
Prediction of lack-of-fusion porosity for powder bed fusion
Tang, M., Pistorius, P. C., & Beuth, J. L. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.12.001 · Cited by 620
Laser based additive manufacturing in industry and academia
Schmidt, M., Merklein, M., Bourell, D., Dimitrov, D., Hausotte, T., Wegener, K., Overmeyer, L., Vollertsen, F., & Levy, G. N. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.011 · Cited by 602
Tammas-Williams, S., Zhao, H., Léonard, F., Derguti, F., Todd, I., & Prangnell, P. B. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.02.008 · Cited by 590
Yu, W. H., Sing, S. L., Chua, C. K., Kuo, C. N., & Tian, X. L. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.04.006 · Cited by 586
du Plessis, A., Yadroitsev, I., Yadroitsava, I., & Le Roux, S. G. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0060 · Cited by 550
Self-citationScientific, technological and economic issues in metal printing and their solutions
DebRoy, T., Mukherjee, T., Milewski, J. O., Elmer, J. W., Ribic, B., Blecher, J. J., & Zhang, W. (2019) · Nature Materials · doi:10.1038/s41563-019-0408-2 · Cited by 543
X-ray computed tomography for additive manufacturing: a review
Thompson, A., Maskery, I., & Leach, R. K. (2016) · Measurement Science and Technology · doi:10.1088/0957-0233/27/7/072001 · Cited by 521
The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components
Tammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2017) · Scientific Reports · doi:10.1038/s41598-017-06504-5 · Cited by 494
Additive manufacturing — A review of 4D printing and future applications
Mitchell, A., Lafont, U., Hołyńska, M., & Semprimoschnig, C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.10.038 · Cited by 494
Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing
du Plessis, A., Broeckhoven, C., Yadroitsava, I., Yadroitsev, I., Hands, C. H., Kunju, R., & Bhate, D. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.033 · Cited by 448
Self-citationMechanical performance of additively manufactured meta-biomaterials
Zadpoor, A. A. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.038 · Cited by 429
Seifi, M., Gorelik, M., Waller, J., Hrabe, N., Shamsaei, N., Daniewicz, S., & Lewandowski, J. J. (2017) · JOM · doi:10.1007/s11837-017-2265-2 · Cited by 422
Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
Slotwinski, J. A., Garboczi, E. J., & Hebenstreit, K. M. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.019 · Cited by 408
Additive manufacturing of titanium alloy for aircraft components
Uhlmann, E., Kersting, R., Klein, T. B., Cruz, M. F., & Borille, A. V. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.08.061 · Cited by 386 · cited 1×
“general [115], and for additively manufactured metals in particular [48,116].”
BackgroundLaboratory x-ray micro-computed tomography: a user guideline for biological samples
du Plessis, A., Broeckhoven, C., Guelpa, A., & le Roux, S. G. (2017) · GigaScience · doi:10.1093/gigascience/gix027 · Cited by 374
Self-citationChoo, H., Sham, K.-L., Bohling, J., Ngo, A., Xiao, X., Ren, Y., Depond, P. J., Matthews, M. J., & Garlea, E. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.12.006 · Cited by 333
Damage evolution and failure mechanisms in additively manufactured stainless steel
Carlton, H. D., Haboub, A., Gallegos, G. F., Parkinson, D. Y., & MacDowell, A. A. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.073 · Cited by 313
King, W., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., & Khairallah, S. A. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000728 · Cited by 308
Environmental assessment of additive manufacturing in the automotive industry
Böckin, D., & Tillman, A.-M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.086 · Cited by 307
Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing
Sanaei, N., Fatemi, A., & Phan, N. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108091 · Cited by 301
Benedetti, M., Fontanari, V., Bandini, M., Zanini, F., & Carmignato, S. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.10.021 · Cited by 297
Jafari, D., & Wits, W. W. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.109 · Cited by 289
Tammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.05.002 · Cited by 288
Defects-dictated tensile properties of selective laser melted Ti-6Al-4V
Voisin, T., Calta, N. P., Khairallah, S. A., Forien, J., Balogh, L., Cunningham, R., Rollett, A. D., & Wang, Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.08.004 · Cited by 277
Uzan, N. E., Ramati, S., Shneck, R., Frage, N., & Yeheskel, O. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.030 · Cited by 274
Tammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3429-3 · Cited by 269
Qualification of AM parts: Extreme value statistics applied to tomographic measurements
Romano, S., Brandão, A., Gumpinger, J., Gschweitl, M., & Beretta, S. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.05.091 · Cited by 269
Effects of process parameters on porosity in laser powder bed fusion revealed by X-ray tomography
du Plessis, A. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100871 · Cited by 264
Development of Micro Selective Laser Melting: The State of the Art and Future Perspectives
Nagarajan, B., Hu, Z., Song, X., Zhai, W., & Wei, J. (2019) · Engineering · doi:10.1016/j.eng.2019.07.002 · Cited by 254
X-ray micro-computed tomography (μCT) for non-destructive characterisation of food microstructure
Schoeman, L., Williams, P., du Plessis, A., & Manley, M. (2016) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2015.10.016 · Cited by 251
Self-citationRashid, R., Masood, S. H., Ruan, D., Palanisamy, S., Rahman Rashid, R. A., & Brandt, M. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.06.023 · Cited by 240
Shrestha, R., Simsiriwong, J., & Shamsaei, N. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.04.011 · Cited by 227
Dallago, M., Winiarski, B., Zanini, F., Carmignato, S., & Benedetti, M. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.03.019 · Cited by 222
On thermal modeling of Additive Manufacturing processes
Foteinopoulos, P., Papacharalampopoulos, A., & Stavropoulos, P. (2018) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2017.09.007 · Cited by 206
Yap, Y. L., & Yeong, W. Y. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.938993 · Cited by 204
Liu, Q. C., Elambasseril, J., Sun, S. J., Leary, M., Brandt, M., & Sharp, P. K. (2014) · Advanced Materials Research · doi:10.4028/www.scientific.net/amr.891-892.1519 · Cited by 201
Laser peening: A tool for additive manufacturing post-processing
Hackel, L., Rankin, J. R., Rubenchik, A., King, W. E., & Matthews, M. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.09.013 · Cited by 194
Defects as a root cause of fatigue failure of metallic components. II: Non-metallic inclusions
Zerbst, U., Madia, M., Klinger, C., Bettge, D., & MURAKAMI, Y. (2019) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2019.01.054 · Cited by 179
Bhate, D., Penick, C. A., Ferry, L. A., & Lee, C. (2019) · Designs · doi:10.3390/designs3010019 · Cited by 178
Density analysis of direct metal laser re-melted 316L stainless steel cubic primitives
Morgan, R., Sutcliffe, C. J., & O'Neill, W. (2004) · Journal of Materials Science · doi:10.1023/b:jmsc.0000013875.62536.fa · Cited by 173
Lowther, M., Louth, S., Davey, A. V., Hussain, A., Ginestra, P. S., Carter, L., Eisenstein, N., Grover, L. M., & Cox, S. C. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.05.033 · Cited by 173
Defects as a root cause of fatigue failure of metallic components. I: Basic aspects
Zerbst, U., Madia, M., Klinger, C., Bettge, D., & Murakami, Y. (2019) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2019.01.055 · Cited by 168
Damon, J., Dietrich, S., Vollert, F., Gibmeier, J., & Schulze, V. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.01.001 · Cited by 166
Deformation Behavior and Microstructure of Ti6Al4V Manufactured by SLM
Krakhmalev, P., Fredriksson, G., Yadroitsava, I., Kazantseva, N., Plessis, A. D., & Yadroitsev, I. (2016) · Physics Procedia · doi:10.1016/j.phpro.2016.08.080 · Cited by 165
Self-citationLaser Powder Bed Fusion of Stainless Steel Grades: A Review
Zitelli, C., Folgarait, P., & Schino, A. D. (2019) · Metals · doi:10.3390/met9070731 · Cited by 162
Larrosa, N. O., Wang, W., Read, N., Loretto, M. H., Evans, C., Carr, J., Tradowsky, U., Attallah, M. M., & Withers, P. J. (2018) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2018.09.011 · Cited by 161
Numerical comparison of lattice unit cell designs for medical implants by additive manufacturing
du Plessis, A., Yadroitsava, I., Yadroitsev, I., le Roux, S., & Blaine, D. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1491713 · Cited by 160
Self-citationRomano, S., Abel, A. M., Gumpinger, J., Brandão, A. D., & Beretta, S. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.05.017 · Cited by 154
Zerbst, U., Madia, M., Klinger, C., Bettge, D., & MURAKAMI, Y. (2019) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2019.01.034 · Cited by 153
Villarraga-Gómez, H., Lee, C., & Smith, S. T. (2017) · Precision Engineering · doi:10.1016/j.precisioneng.2017.08.021 · Cited by 149
A Review of Selective Laser Melted NiTi Shape Memory Alloy
Khoo, Z. X., Liu, Y., An, J., Chua, C., Shen, Y., & Kuo, C. N. (2018) · Materials · doi:10.3390/ma11040519 · Cited by 148
Hierarchical design principles of selective laser melting for high quality metallic objects
Yadroitsev, I. A., Krakhmalev, P., & Yadroitsava, I. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.12.007 · Cited by 142
Self-citationStef, J., Poulon‐Quintin, A., Redjaïmia, A., Ghanbaja, J., Ferry, O., Sousa, M. D., & Gouné, M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.049 · Cited by 128
Krakhmalev, P., & Yadroitsev, I. A. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.11.012 · Cited by 125
Self-citationSun, Y., Gulizia, S., Oh, C. H., Fraser, D., Leary, M., Yang, Y., & Qian, M. (2016) · JOM · doi:10.1007/s11837-015-1768-y · Cited by 124
Wilson-Heid, A. E., Novak, T. C., & Beese, A. M. (2018) · Experimental Mechanics · doi:10.1007/s11340-018-00465-0 · Cited by 122
Kelly, C. N., Evans, N. T., Irvin, C. W., Chapman, S. C., Gall, K., & Safranski, D. L. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.01.024 · Cited by 109
Standardized X-ray tomography testing of additively manufactured parts: A round robin test
du Plessis, A., & le Roux, S. G. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.09.014 · Cited by 102
Nasab, M. H., Romano, S., Gastaldi, D., Beretta, S., & Vedani, M. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100918 · Cited by 100
du Plessis, A., Yadroitsava, I., & Yadroitsev, I. A. (2018) · Optics & Laser Technology · doi:10.1016/j.optlastec.2018.07.050 · Cited by 97
Self-citationStandard method for microCT-based additive manufacturing quality control 1: Porosity analysis
du Plessis, A., Sperling, P., Beerlink, A., Tshabalala, L. C., Hoosain, S. E., Mathe, N., & le Roux, S. G. (2018) · MethodsX · doi:10.1016/j.mex.2018.09.005 · Cited by 92
Fatigue Properties Of Additively Manufactured AlSi10Mg – Surface Treatment Effect
Brandão, A. D., Gumpinger, J., Gschweitl, M., Seyfert, C., Hofbauer, P., & Ghidini, T. (2017) · Procedia Structural Integrity · doi:10.1016/j.prostr.2017.11.061 · Cited by 89
Fatigue life prediction for AlSi10Mg components produced by selective laser melting
Ming, T., & Pistorius, P. C. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.04.015 · Cited by 88
Looking deep into nature: A review of micro-computed tomography in biomimicry
du Plessis, A., & Broeckhoven, C. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.014 · Cited by 87
Pore Closure Effect of Laser Shock Peening of Additively Manufactured AlSi10Mg
du Plessis, A., Glaser, D., Möller, H., Mathe, N., Tshabalala, L. C., Mfusi, B. J., & Mostert, R. J. (2019) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2019.0064 · Cited by 87
Qualification of Ti6Al4V ELI Alloy Produced by Laser Powder Bed Fusion for Biomedical Applications
Yadroitsev, I., Krakhmalev, P., Yadroitsava, I., & Du Plessis, A. (2018) · JOM · doi:10.1007/s11837-017-2655-5 · Cited by 79
Self-citationKantzos, C., Cunningham, R., Tari, V., & Rollett, A. D. (2017) · Computational Mechanics · doi:10.1007/s00466-017-1531-z · Cited by 79
Prediction of mechanical performance of Ti6Al4V cast alloy based on microCT-based load simulation
du Plessis, A., Yadroitsava, I., le Roux, S. G., Yadroitsev, I. A., Fieres, J., Reinhart, C., & Rossouw, P. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.06.320 · Cited by 61
Self-citationKrakhmalev, P., Yadroitsev, I. A., Yadroitsava, I., & de Smidt, O. (2017) · Materials · doi:10.3390/ma10101154 · Cited by 61
Self-citationEffect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg
Schneller, W., Leitner, M., Springer, S., Grün, F., & Taschauer, M. (2019) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp3010016 · Cited by 55
du Plessis, A., le Roux, S. G., Booysen, G. J., & Els, J. (2016) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0034 · Cited by 52
Quality Control of a Laser Additive Manufactured Medical Implant by X-Ray Tomography
du Plessis, A., le Roux, S. G., Booysen, G. J., & Els, J. (2016) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2016.0012 · Cited by 52
Standard method for microCT-based additive manufacturing quality control 4: Metal powder analysis
du Plessis, A., Sperling, P., Beerlink, A., du Preez, W., & le Roux, S. G. (2018) · MethodsX · doi:10.1016/j.mex.2018.10.021 · Cited by 52
X-ray computed tomography and additive manufacturing in medicine: a review
Thompson, A., McNally, D. S., Maskery, I., & Leach, R. (2017) · International Journal of Metrology and Quality Engineering · doi:10.1051/ijmqe/2017015 · Cited by 48
Standard method for microCT-based additive manufacturing quality control 2: Density measurement
du Plessis, A., Sperling, P., Beerlink, A., Tshabalala, L. C., Hoosain, S. E., Mathe, N., & le Roux, S. G. (2018) · MethodsX · doi:10.1016/j.mex.2018.09.006 · Cited by 46
RESIDUAL STRESS IN TI6AL4V OBJECTS PRODUCED BY DIRECT METAL LASER SINTERING
van Zyl, I., Yadroitsava, I., & Yadroitsev, I. A. (2016) · The South African Journal of Industrial Engineering · doi:10.7166/27-4-1468 · Cited by 44
Self-citationStandard method for microCT-based additive manufacturing quality control 3: Surface roughness
du Plessis, A., Sperling, P., Beerlink, A., Krüger, O., Tshabalala, L. C., Hoosain, S. E., & le Roux, S. G. (2018) · MethodsX · doi:10.1016/j.mex.2018.09.004 · Cited by 42
X-ray microtomography in herpetological research: a review
Broeckhoven, C., & du Plessis, A. (2018) · Amphibia-Reptilia · doi:10.1163/15685381-20181102 · Cited by 37
Zerbst, U., & Hilgenberg, K. (2017) · Procedia Structural Integrity · doi:10.1016/j.prostr.2017.11.071 · Cited by 35
Predicting failure in additively manufactured parts using X-ray computed tomography and simulation
Fieres, J., Schumann, P., & Reinhart, C. (2018) · Procedia Engineering · doi:10.1016/j.proeng.2018.02.008 · Cited by 33
Computationally-Optimized Bone Mechanical Modeling from High-Resolution Structural Images
Magland, J. F., Zhang, N., Rajapakse, C. S., & Wehrli, F. W. (2012) · PLoS ONE · doi:10.1371/journal.pone.0035525 · Cited by 27
Residual Stress in Metal Specimens Produced by Direct Metal Laser Sintering
Yadroitsava, I., & Yadroitsev, I. A. (2015) · Cited by 26
Self-citationAdvancing X-ray micro computed tomography in Africa: Going far, together
du Plessis, A., le Roux, S. G., & Tshibalanganda, M. (2019) · Scientific African · doi:10.1016/j.sciaf.2019.e00061 · Cited by 19
Malefane, L. B., du Preez, W., Maring, M., & du Plessis, A. (2018) · The South African Journal of Industrial Engineering · doi:10.7166/29-3-2077 · Cited by 18
Cited by
Metal additive manufacturing in aerospace: A review
Blakey-Milner, B., Gradl, P., Snedden, G., Brooks, M., Pitot, J., Lopez, E., Leary, M., Berto, F., & du Plessis, A. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110008 · Cited by 2,263
Self-citationSanaei, N., & Fatemi, A. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100724 · Cited by 1,029
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Self-citationWu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
A machine-learning fatigue life prediction approach of additively manufactured metals
Bao, H., Wu, S., Wu, Z., Kang, G., Peng, X., & Withers, P. J. (2021) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2020.107508 · Cited by 336
Metadata
- Authors
- du Plessis, A., Yadroitsava, I., & Yadroitsev, I.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 187
- Pages
- 108385
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2990451840
- Cited by
- 712
- References
- 108
- FWCI
- 34.19
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.