The DOI matches its Crossref record; 123 of the 123 references it cites were found in a registry or an index.
A review of the state-of-the-art in electronic cooling
Open accessAbstract
The cooling or thermal management issues are facing critical challenges with the continuous miniaturization and rapid increase of heat flux of electronic devices. Significant efforts have been made to develop high-efficient cooling and flexible thermal management solutions and corresponding design tools. This article reviews the latest progress and the state-of-the-art in electronic cooling, which could help inspire future research. The commonly used methods in electronic cooling, classified into direct and indirect cooling, are reviewed and discussed in detail. Direct cooling consists of air cooling, spray and jet impingement cooling, immersion cooling, and droplet electrowetting. As for indirect cooling, the most popular and hot topics of using microchannel, heat pipe, vapour chamber, thermoelectric, and PCM are overviewed. The effectiveness of the thermal management methods for different-level requirements of electronic cooling and the ways how heat transfer capability can be improved are also introduced in detail. Meanwhile, the pros and cons of these thermal management methods are discussed based on their inherent heat transfer performances/characteristics, optimisation methods, and relevant applications. In addition, the current challenges of electronic cooling and thermal management technologies are explored, along with the outlook of possible future advances.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Journal of Physics: Conference Series
(2013) · Journal of Physics Conference Series · doi:10.1088/issn.1742-6596 · Cited by 15,679
IOP Conference Series: Earth and Environmental Science
(2020) · IOP Conference Series Earth and Environmental Science · doi:10.1088/issn.1755-1315 · Cited by 12,764
IOP Conference Series: Materials Science and Engineering
(2022) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/1231/1/011001 · Cited by 10,357
Cramming More Components onto Integrated Circuits (1965)
Moore, G. (2021) · Ideas That Created the Future · doi:10.7551/mitpress/12274.003.0027 · Cited by 6,241
Cramming More Components Onto Integrated Circuits
Moore, G. E. (1998) · Proceedings of the IEEE · doi:10.1109/jproc.1998.658762 · Cited by 5,926
Téllez, A. F. (2006) · conference · Cited by 5,352
High-performance heat sinking for VLSI
Tuckerman, D. B., & Pease, R. F. W. (1981) · IEEE Electron Device Letters · doi:10.1109/edl.1981.25367 · Cited by 5,291
Electromigration—A brief survey and some recent results
Black, J. R. (1969) · IEEE Transactions on Electron Devices · doi:10.1109/t-ed.1969.16754 · Cited by 1,506
A critical review of traditional and emerging techniques and fluids for electronics cooling
Sohel Murshed, S. M., & Nieto de Castro, C. A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.112 · Cited by 987
Spray cooling heat transfer: The state of the art
Kim, J. (2007) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2006.09.003 · Cited by 968
Evolution of Microchannel Flow Passages--Thermohydraulic Performance and Fabrication Technology
Kandlikar, S. G., & Grande, W. J. (2003) · Heat Transfer Engineering · doi:10.1080/01457630304040 · Cited by 960
Thermoelectric cooling materials
Mao, J., Chen, G., & Ren, Z. (2021) · Nature Materials · doi:10.1038/s41563-020-00852-w · Cited by 797
A review on effect of phase change material encapsulation on the thermal performance of a system
Salunkhe, P. B., & Shembekar, P. S. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.037 · Cited by 657
Twaha, S., Zhu, J., Yan, Y., & Li, B. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.07.034 · Cited by 644
Self-citation(2026) · Advanced materials research · doi:10.4028/www.scientific.net/amr · Cited by 624
Heat pipe based systems - Advances and applications
Jouhara, H., Chauhan, A., Nannou, T., Almahmoud, S., Delpech, B., & Wrobel, L. C. (2017) · Energy · doi:10.1016/j.energy.2017.04.028 · Cited by 614
Review of spray cooling – Part 1: Single-phase and nucleate boiling regimes, and critical heat flux
Liang, G., & Mudawar, I. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.06.029 · Cited by 609
Zhang, S., Feng, D., Shi, L., Wang, L., Jin, Y., Tian, L., Li, Z., Wang, G., Zhao, L., & Yan, Y. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110127 · Cited by 568
Self-citationFlexible thermoelectric materials and devices
Du, Y., Xu, J., Paul, B., & Eklund, P. (2018) · Applied Materials Today · doi:10.1016/j.apmt.2018.07.004 · Cited by 567
Fluid Flow and Heat Transfer at Micro- and Meso-Scales With Application to Heat Exchanger Design
Mehendale, S. S., Jacobi, A. M., & Shah, R. K. (2000) · Applied Mechanics Reviews · doi:10.1115/1.3097347 · Cited by 537
Droplet Actuation by Electrowetting-on-Dielectric (EWOD): A Review
Nelson, W. C., & Kim, C.-J. ‘. (2012) · Journal of Adhesion Science and Technology · doi:10.1163/156856111x599562 · Cited by 454
Novel nanostructured thermal interface materials: a review
Hansson, J., Nilsson, T. M. J., Ye, L., & Liu, J. (2018) · International Materials Reviews · doi:10.1080/09506608.2017.1301014 · Cited by 441
Present and future thermal interface materials for electronic devices
Razeeb, K. M., Dalton, E., Cross, G. L. W., & Robinson, A. J. (2018) · International Materials Reviews · doi:10.1080/09506608.2017.1296605 · Cited by 422
Kandlikar, S. G. (2012) · Journal of Heat Transfer · doi:10.1115/1.4005126 · Cited by 389
Gunnasegaran, P., Mohammed, H. A., Shuaib, N. H., & Saidur, R. (2010) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2010.06.014 · Cited by 387
Electronics cooling with nanofluids: A critical review
Bahiraei, M., & Heshmatian, S. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.07.047 · Cited by 387
Lin, L., Zhao, J., Lu, G., Wang, X.-D., & Yan, W.-M. (2017) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.05.013 · Cited by 356
Self-citationContinuous scanning for Bragg coherent X-ray imaging
Li, N., Dupraz, M., Wu, L., Leake, S. J., Resta, A., Carnis, J., Labat, S., Almog, E., Rabkin, E., Favre-Nicolin, V., et al. (2020) · Scientific Reports · doi:10.1038/s41598-020-69678-5 · Cited by 321
Qureshi, Z. A., Elnajjar, E., Al-Ketan, O., Al-Rub, R. A., & Al-Omari, S. B. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121001 · Cited by 302
Mahmoud, S. M., Tang, A., Toh, C. K., Al-Dadah, R., & Soo, S. L. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.04.059 · Cited by 299
Kandlikar, S. G., & Bapat, A. V. (2007) · Heat Transfer Engineering · doi:10.1080/01457630701421703 · Cited by 291
Farzanehnia, A., Khatibi, M., Sardarabadi, M., & Passandideh-Fard, M. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.10.037 · Cited by 288
Influence of channel geometry on the performance of a counter flow microchannel heat exchanger
Hasan, M. I., Rageb, A. A., Yaghoubi, M., & Homayoni, H. (2009) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2009.01.004 · Cited by 260
Current commercialization status of electrowetting-on-dielectric (EWOD) digital microfluidics
Li, J., & Kim, C.-J. “. (2020) · Lab on a Chip · doi:10.1039/d0lc00144a · Cited by 257
Ali, H. M., Ashraf, M. J., Giovannelli, A., Irfan, M., Irshad, T. B., Hamid, H. M., Hassan, F., & Arshad, A. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.02.044 · Cited by 248
Heat pipe with nano enhanced-PCM for electronic cooling application
Krishna, J., Kishore, P. S., & Solomon, A. B. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.10.014 · Cited by 247
Water immersion cooling of high power density electronics
Birbarah, P., Gebrael, T., Foulkes, T., Stillwell, A., Moore, A., Pilawa-Podgurski, R., & Miljkovic, N. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118918 · Cited by 242
An overview of passive techniques for heat transfer augmentation in microchannel heat sink
Sidik, N. A. C., Muhamad, M. N. A. W., Japar, W. M. A. A., et al. (2017) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2017.08.009 · Cited by 234
Studies on optimum fins number in PCM-based heat sinks
Kalbasi, R., Afrand, M., Alsarraf, J., & Tran, M.-D. (2019) · Energy · doi:10.1016/j.energy.2019.01.070 · Cited by 221
Arshad, A., Jabbal, M., & Yan, Y. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112444 · Cited by 220
Self-citationReview of two-phase flow instabilities in macro- and micro-channel systems
O’Neill, L. E., & Mudawar, I. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119738 · Cited by 217
Heat transfer enhancement in microchannel heat sink with bidirectional rib
Wang, G., Qian, N., & Ding, G. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.018 · Cited by 214
Ho, C. J., Liu, Y.-C., Ghalambaz, M., & Yan, W.-M. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119858 · Cited by 207
Parametric Numerical Study of Flow and Heat Transfer in Microchannels With Wavy Walls
Gong, L., Kota, K. M., Tao, W., & Joshi, Y. K. (2011) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4003284 · Cited by 203
Liang, G., & Mudawar, I. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118864 · Cited by 203
Cooling of high-power-density microdevices using liquid metal coolants
Miner, A., & Ghoshal, U. (2004) · Applied Physics Letters · doi:10.1063/1.1772862 · Cited by 194
Ren, Q., Guo, P., & Zhu, J. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.119199 · Cited by 190
Qureshi, Z. A., Al-Omari, S. A. B., Elnajjar, E., Al-Ketan, O., & Al-Rub, R. A. (2021) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2021.105265 · Cited by 189
Fabrication of microchannels: A review
Prakash, S., & Kumar, S. (2015) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/0954405414535581 · Cited by 176
Edalatpour, M., Liu, L., Jacobi, A. M., Eid, K., & Sommers, A. D. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.178 · Cited by 171
Transient simulation of finned heat sinks embedded with PCM for electronics cooling
Arshad, A., Jabbal, M., Sardari, P. T., Bashir, M. A., Faraji, H., & Yan, Y. (2020) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2020.100520 · Cited by 169
Self-citationThe micro‐/nano‐PCMs for thermal energy storage systems: A state of art review
Arshad, A., Jabbal, M., Yan, Y., & Darkwa, J. (2019) · International Journal of Energy Research · doi:10.1002/er.4550 · Cited by 165
Self-citationParametric numerical study of the flow and heat transfer in microchannel with dimples
Xu, M., Lu, H. M., Gong, L., Chai, J. C. K., & Duan, X. (2016) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2016.06.002 · Cited by 148
Heat transfer evaluation of a micro heat exchanger cooling with spherical carbon-acetone nanofluid
Li, Z., Khaled, U., Al‐Rashed, A. A. A. A., Goodarzi, M., Sarafraz, M. M., & Meer, R. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.119124 · Cited by 139
Yang, X., Tan, S., He, Z., & Liu, J. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.01.056 · Cited by 135
A review of heat pipe technology for foldable electronic devices
Gibbons, M. J., Marengo, M., & Persoons, T. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117087 · Cited by 127
Chen, G., Tang, Y. Z., Wan, Z., Zhong, G., Tang, H. H., & Zeng, J. (2018) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2018.10.011 · Cited by 126
Recent Advances in Vapor Chamber Transport Characterization for High-Heat-Flux Applications
Weibel, J. A., & Garimella, S. V. (2013) · Advances in heat transfer · doi:10.1016/b978-0-12-407819-2.00004-9 · Cited by 125
Experimental and numerical investigation of jet impingement cooling using extended jet holes
Tepe, A. Ü., Yetişken, Y., Uysal, Ü., & Arslan, K. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119945 · Cited by 125
Bondareva, N. S., & Sheremet, M. А. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.04.040 · Cited by 124
Siddiqui, O. K., & Zubair, S. M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.074 · Cited by 122
A general approach in evaluating and optimizing thermoelectric coolers
Zhang, H. (2010) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2010.04.007 · Cited by 116
Recent progress in the development of thermal interface materials: a review
Zhang, Y., Ma, J., Wei, N., Yang, J., & Pei, Q. (2020) · Physical Chemistry Chemical Physics · doi:10.1039/d0cp05514j · Cited by 111
Radwan, A., Ookawara, S. A., & Ahmed, M. A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.017 · Cited by 109
Swamy, M. C. K., & Satyanarayan (2019) · Journal of Electronic Materials · doi:10.1007/s11664-019-07623-7 · Cited by 109
Synthetic jet actuators for heat transfer enhancement – A critical review
Arshad, A., Jabbal, M., & Yan, Y. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118815 · Cited by 108
Self-citationDesai, A. N., Gunjal, A. A., & Singh, V. K. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118855 · Cited by 106
Jet impingement and spray cooling using slurry of nanoencapsulated phase change materials
Wu, W., Bostanci, H., Chow, L. C., Ding, S., Hong, Y., Su, M., Kizito, J. P., Gschwender, L. J., & Snyder, C. E. (2011) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2011.03.022 · Cited by 101
Wu, R., Hong, T., Cheng, Q., Zou, H., Fan, Y., & Luo, X. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.03.112 · Cited by 100
High-Efficiency Polymer-Based Direct Multi-Jet Impingement Cooling Solution for High-Power Devices
Wei, T., Oprins, H., Cherman, V. O., Qian, J., Wolf, I. D., Beyne, E., & Baelmans, M. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2872904 · Cited by 98
Righetti, G., Savio, G., Meneghello, R., et al. (2020) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2020.106376 · Cited by 95
Liquid immersion cooling technology with natural convection in data center
Matsuoka, M., Matsuda, K., & Hideo, K. (2017) · IEEE International Conference on Cloud Networking · doi:10.1109/cloudnet.2017.8071539 · Cited by 93
Ling, Y., Zhang, X., Wang, F., & She, X. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.03.008 · Cited by 91
Arshad, A., Jabbal, M., & Yan, Y. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115999 · Cited by 91
Self-citationArshad, A., Jabbal, M., Shi, L., & Yan, Y. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2020.102231 · Cited by 91
Self-citationQu, J., Ke, Z., Zuo, A., & Rao, Z. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.10.019 · Cited by 90
Thermo-hydraulic performance of nanofluids in a bionic heat sink
Tang, J., Qi, C., Ding, Z. W., Afrand, M., & Yan, Y. (2021) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2021.105492 · Cited by 86
Self-citationPhase Change Material Heat Sink for Transient Cooling of High-Power Devices
Yang, T., Braun, P. V., Miljkovic, N., & King, W. P. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121033 · Cited by 84
Effect of substrate thickness and material on heat transfer in microchannel heat sinks
Koşar, A. (2009) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2009.11.004 · Cited by 83
A State-of-the-Art Review of Compact Vapor Compression Refrigeration Systems and Their Applications
Barbosa, J. R., Jr., Ribeiro, G. B., & de Oliveira, P. A. (2011) · Heat Transfer Engineering · doi:10.1080/01457632.2012.613275 · Cited by 81
Arshad, A., Jabbal, M., Shi, L., Darkwa, J., Weston, N. J., & Yan, Y. (2020) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2020.100865 · Cited by 81
Self-citationImmersion cooling as the next technology for data center cooling: A review
Kuncoro, I. W., Pambudi, N. A., Biddinika, M. K., Widiastuti, I., Hijriawan, M., & Wibowo, K. M. (2019) · Journal of Physics Conference Series · doi:10.1088/1742-6596/1402/4/044057 · Cited by 81
Pool boiling heat transfer enhancement with electrowetting
Sur, A., Lu, Y., Pascente, C., Ruchhoeft, P., & Liu, D. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.029 · Cited by 80
Cai, C. L., Liu, H., Jia, M., Yin, H., Xie, R. J., & Yan, P. (2020) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2019.106258 · Cited by 77
Chen, Y., Li, B., Wang, X., Yan, Y., Wang, Y., & Fang, Q. (2019) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2019.01.007 · Cited by 76
Self-citationSaber, H. H., Al-Shehri, S. A., & Maref, W. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.04.028 · Cited by 73
Conjugate effect on flow boiling instability in wavy microchannel
Tiwari, N., & Moharana, M. K. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120791 · Cited by 73
Kothari, R. C., Sahu, S. K., Kundalwal, S. I., & Mahalkar, P. (2020) · International Journal of Energy Research · doi:10.1002/er.6215 · Cited by 72
Heat spreading of liquid jet impingement cooling of cold plate heat sink with different fin shapes
Wiriyasart, S., & Naphon, P. (2020) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2020.100638 · Cited by 71
Thermal performance of aluminum vapor chamber for EV battery thermal management
Kim, J. S., Shin, D. H., You, S. M., & Lee, J. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.116337 · Cited by 70
A critical review on measures to suppress flow boiling instabilities in microchannels
Mao, N., Zhuang, J., He, T., et al. (2021) · Heat and Mass Transfer · doi:10.1007/s00231-020-03009-2 · Cited by 70
Liu, T., Dunham, M. T., Jung, K. W., Chen, B., Asheghi, M., & Goodson, K. E. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119569 · Cited by 69
Chen, Y., Li, B., Wang, X., Wang, X., Yan, Y., Li, X., Wang, Y., Fang, Q., & Li, H. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3031372 · Cited by 69
Self-citationAdaptive Chip Cooling Using Electrowetting on Coplanar Control Electrodes
Cheng, J., & Chen, C.-L. (2010) · Nanoscale and Microscale Thermophysical Engineering · doi:10.1080/15567261003601771 · Cited by 66
A Quick Overview of Compact Air-Cooled Heat Sinks Applicable for Electronic Cooling—Recent Progress
Wang, C. (2017) · Inventions · doi:10.3390/inventions2010005 · Cited by 66
Sun, X., Zhang, L., & Liao, S. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.12.094 · Cited by 64
Improving transient performance of thermoelectric generator by integrating phase change material
Huang, K., Yan, Y., Wang, G., et al. (2020) · Energy · doi:10.1016/j.energy.2020.119648 · Cited by 63
Self-citationDesai, A. N., Shah, H., & Singh, V. K. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117155 · Cited by 63
Experimental investigation on spray cooling with low-alcohol additives
Liu, H., Cai, C. L., Jia, M., et al. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.054 · Cited by 59
Droplet-Based Microfluidic Thermal Management Methods for High Performance Electronic Devices
Yan, Z., Jin, M., Li, Z., Zhou, G., & Shui, L. (2019) · Micromachines · doi:10.3390/mi10020089 · Cited by 58
Heat transfer performance and optimization of a close-loop R410A flash evaporation spray cooling
Lin, Y.-K., Zhou, Z., Fang, Y., Tang, H.-L., & Chen, B. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113966 · Cited by 58
Performance and Manufacturing of Silicon-Based Vapor Chambers
Liu, T., Asheghi, M., & Goodson, K. E. (2021) · Applied Mechanics Reviews · doi:10.1115/1.4049801 · Cited by 56
Sun, X., Ling, L., Liao, S., Chu, Y., Fan, S., & Mo, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.10.068 · Cited by 50
Experimental investigation of a vapour chamber heat spreader with hybrid wick structure
Velardo, J., Date, A., Singh, R., Nihill, J., Date, A., Phan, T. L., & Takahashi, M. K. (2019) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2019.02.009 · Cited by 50
Zhang, C., Zhang, L., Xu, H., Wang, D., & Ye, B. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2017.03.028 · Cited by 49
Enhanced heat transfer by an original immersed spray cooling system integrated with an ejector
Wang, J., Li, Y., Li, J., Li, C., Xiong, K., & Ning, X.-W. (2018) · Energy · doi:10.1016/j.energy.2018.06.019 · Cited by 47
Critical Heat Flux of Confined Round Single Jet and Jet Array Impingement Boiling
Devahdhanush, V. S., & Mudawar, I. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120857 · Cited by 46
Flow boiling of R134a in an open-cell metal foam mini-channel evaporator
Gao, W., Xu, X., & Liang, X. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.04.125 · Cited by 45
Hou, F., Zhang, H., Huang, D., Fan, J., Liu, F., Lin, T., Cao, L., Fan, X., Ferreira, J. A., & Zhang, G. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2985117 · Cited by 41
Arshad, A., Jabbal, M., Faraji, H., Talebizadehsardari, P., Bashir, M. A., & Yan, Y.-Y. (2021) · Heat and Mass Transfer · doi:10.1007/s00231-021-03065-2 · Cited by 41
Self-citationEffects of surfactant and nanofluid on the performance and optimization of a microchannel heat sink
Shamsuddin, H. S., Estellé, P., Navas, J., Ghazali, N. M., & Mohamad, M. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121336 · Cited by 41
Experimental investigation on heat transfer characteristics of R1336mzz flash spray cooling
Zhang, Z., Li, Q., & Hu, D. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115277 · Cited by 39
Self-citationExperimental evaluation of a compact two-phase cooling system for high heat flux electronic packages
Hou, F., Wang, W., Zhang, H., Chen, C., Chen, C., Lin, T., Cao, L., Zhang, G. Q., & Ferreira, J. A. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114338 · Cited by 34
Biomimetic capillary inspired heat pipe wicks
Wang, Q., Hong, J., & Yan, Y. (2014) · Journal of Bionic Engineering · doi:10.1016/s1672-6529(14)60059-7 · Cited by 32
Self-citationArshad, A., Jabbal, M., Faraji, H., Bashir, M. A., Talebizadehsardari, P., & Yan, Y. (2021) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2021.105323 · Cited by 29
Self-citationLi, B., Chen, Y., Wang, X., Li, Y., & Yan, Y. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115896 · Cited by 27
Self-citationGao, J., Zhang, X., Fu, J., Yang, X., & Liu, J. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119366 · Cited by 24
2016 International Conference on Electronics Packaging (ICEP)
(2016) · doi:10.1109/icep38238.2016 · Cited by 20
Yao, C., Dan, D., Zhang, Y., Wang, Y., Qian, Y., Yan, Y., & Zhuge, W. (2020) · Automotive Innovation · doi:10.1007/s42154-020-00114-0 · Cited by 18
Self-citationMaterial Selection for Microchannel Heatsink: Conjugate Heat Transfer Simulation
Kumar, A. U., Javed, A., & Dubey, S. K. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/346/1/012024 · Cited by 17
Thermodynamic design of a mesoscale vapor compression cooling device
Yee, R. P., & Hermes, C. J. L. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.09.073 · Cited by 14
Thermal Interface Materials Based on Vertically Aligned Carbon Nanotube Arrays: A Review
Yuan, G., Li, H., Shan, B., & Liu, J. (2018) · Micro and Nanosystems · doi:10.2174/1876402911666181218143608 · Cited by 14
Liquid Cooling, opportunity & challenges toward effective and efficient scalabilities
Wei, J. (2019) · IEEE CPMT Symposium Japan (ICSJ) · doi:10.1109/icsj47124.2019.8998723 · Cited by 6
Metadata
- Authors
- Zhang, Z., Wang, X., & Yan, Y.
- Venue
- e-Prime - Advances in Electrical Engineering, Electronics and Energy
- Publisher
- Elsevier BV
- Published
- 2021
- Volume
- 1
- Pages
- 100009
- ISSN
- 2772-6711 (ISSN-L)
- OpenAlex
- W3209126808
- Cited by
- 310
- References
- 123
- FWCI
- 17.64
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.