Performance of finned tube heat exchangers operating under frosting conditions
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
Senshu et al. and Yan et al. observed that mean fin temperature increased as air velocity increased, leading to lower frosting rate, and that surface temperature became colder as air velocity decreased, increasing frosting rate.
“Senshu et al. (1990) explicated that the mean temperature of fin increased as the air velocity increased which leaded to lower frosting rate.Yan et al. (2003) further explained that the surface temperature become colder as the air velocity decreased.Lower temperature tends to increase the frosting rate.”
From Studies of an air cooler under frost condition (2019) · cites this paper as Yan et al. (2003)
The result is agreeable with Gatchilov and Ivanova (1979) and Yan et al. (2003).
“This is also agreeable with Gatchilov and Ivanova (1979) and Yan et al. (2003).”
From Studies of an air cooler under frost condition (2019) · cites this paper as Yan et al. (2003)
The trend of change in air pressure drop is consistent with results reported by Senshu et al. (1990) and Yan et al. (2003).
“The trend of change in air pressure drop is consistent with the results reported by other researchers such as Senshu et al. (1990) and Yan et al. (2003).”
From Studies of an air cooler under frost condition (2019) · cites this paper as Yan et al. (2003)
Such trends have been reported by Senshu et al. (1990) and Yan et al. (2003).
“Such trends have also been reported by Senshu et al. (1990) and Yan et al. (2003).”
From Studies of an air cooler under frost condition (2019) · cites this paper as Yan et al. (2003)
Most heat exchangers used in industrial and domestic refrigerators have been developed experimentally.
“However, most heat exchangers used in industrial and domestic refrigerators have been developed experimentally [18-20].”
From Fin spacing optimization of a fin-tube heat exchanger under frosting conditions (2006) · cites this paper as [19]
In most experimental researches, the airflow rate across the finned-tube heat exchanger was maintained constant throughout the frosting test, although frost grows continuously.
“Second, the airflow rate across the finned-tube heat exchanger is maintained to be constant throughout the frosting test in most of the experimental researches [5,10,11,13,20], although frost grows continuously.”
From Effect of fin types of outdoor fan-supplied finned-tube heat exchanger on periodic frosting and defrosting performance of a residential air-source heat pump (2014) · cites this paper as [13]
Cites
(1953) · Mechanical Engineering · Cited by 6,608 · see citing works
Effect of frost growth on the performance of louvered finned tube heat exchangers
Kondepudi, S. N., & O'Neal, D. L. (1989) · International Journal of Refrigeration · doi:10.1016/0140-7007(89)90030-3 · Cited by 67 · see citing works
(1990) · ASHRAE Transactions (American Society of Heating, Refrigerating and Air-Conditioning Engineers) · Cited by 55 · see citing works
Performance of finned-tube heat exchangers under frosting conditions: I. Simulation model
Kondepudi, S. N., & O'Neal, D. L. (1993) · International Journal of Refrigeration · doi:10.1016/0140-7007(93)90045-a · Cited by 54 · see citing works
Kondepudi, S. N., & O’Neal, D. L. (1993) · International Journal of Refrigeration · doi:10.1016/0140-7007(93)90046-b · Cited by 25 · see citing works
Flagged first, then by citations
Cited by
Sorted by citations
Review on improvement for air source heat pump units during frosting and defrosting
Song, M., Deng, S., Dang, C., Mao, N., & Wang, Z. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.022 · Cited by 384 · see citing works
Yao, Y., Jiang, Y., Deng, S., & Ma, Z. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.03.013 · Cited by 196 · see citing works
Heating solutions for residential buildings in China: Current status and future outlook
Su, C., Madani, H., & Palm, B. E. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.10.005 · Cited by 177 · see citing works
Experimental study on frost growth and dynamic performance of air source heat pump system
Guo, X.-M., Chen, Y.-G., Wang, W.-H., & Chen, C.-Z. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2008.01.007 · Cited by 173 · see citing works
A new time- and space-dependent model for predicting frost formation
Cui, J., Li, W. Z., Liu, Y., & Jiang, Z. Y. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2010.09.022 · Cited by 101 · see citing works
Heat transfer—A review of 2003 literature
Goldstein, R. J., Ibele, W. E., Patankar, S. V., Simon, T. W., Kuehn, T. H., Strykowski, P. J., Tamma, K. K., Heberlein, J. V. R., Davidson, J. H., Bischof, J. C., et al. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2005.11.001 · Cited by 101 · see citing works
Huang, D., Ri-Jing, Z., Liu, Y., & Yi, D.-B. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.11.052 · Cited by 99 · see citing works
Modeling for predicting frosting behavior of a fin–tube heat exchanger
Yang, D.-K., Lee, K.-S., & Song, S. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2005.09.022 · Cited by 94 · see citing works
Song, M., Mao, N., Xu, Y., & Deng, S. (2019) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2019.03.002 · Cited by 92 · see citing works
Kim, K., & Lee, K.-S. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.01.036 · Cited by 89 · see citing works
Patil, M. S., Seo, J.-H., & Lee, M.-Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.107 · Cited by 86 · see citing works
Song, M., Xia, L., Mao, N., & Deng, S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.11.036 · Cited by 85 · see citing works
Fin spacing optimization of a fin-tube heat exchanger under frosting conditions
Yang, D.-K., Lee, K.-S., & Song, S. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.01.016 · Cited by 81 · see citing works
Influence of Outdoor Air Conditions on the Air Source Heat Pumps Performance
Vocale, P., Morini, G. L., & Spiga, M. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.01.070 · Cited by 79 · see citing works
Tso, C. P., Cheng, Y. C., & Lai, A. C. K. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2005.04.009 · Cited by 75 · see citing works
A new model for predicting performance of fin-and-tube heat exchanger under frost condition
Cui, J., Li, W. Z., Liu, Y., & Zhao, Y. S. (2011) · International Journal of Heat and Fluid Flow · doi:10.1016/j.ijheatfluidflow.2010.11.004 · Cited by 74 · see citing works
Zhang, L., Jiang, Y., Dong, J., Yao, Y., & Deng, S. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.09.016 · Cited by 65 · see citing works
Kim, K., Kim, M.-H., Kim, D. R., & Lee, K.-S. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.12.060 · Cited by 64 · see citing works
Lee, M., Kim, Y., Lee, H.-S., & Kim, Y. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.02.047 · Cited by 63 · see citing works
Research on frost formation in air source heat pump at cold-moist conditions in central-south China
Gong, G., Tang, J., Lv, D., & Wang, H. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.08.001 · Cited by 59 · see citing works
Kim, K., & Lee, K.-S. (2012) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.06.076 · Cited by 56 · see citing works
Zhang, L., Jiang, Y., Dong, J., Yao, Y., & Deng, S. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.047 · Cited by 56 · see citing works
Liang, S., Wang, W., Sun, Y., Li, Z., Zhao, J., Lin, Y., & Deng, S. (2020) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2019.10.009 · Cited by 53 · see citing works
Thermofluid characteristics of frosted finned-tube heat exchangers
Yan, W.-M., Li, H.-Y., & Tsay, Y.-L. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2005.02.018 · Cited by 52 · see citing works
Self-citationFrosting behaviors and thermal performance of louvered fins with unequal louver pitch
Park, J.-S., Kim, D. R., & Lee, K.-S. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.12.042 · Cited by 51 · see citing works
Numerical simulation of frosting behavior and its effect on a direct-contact ambient air vaporizer
Kuang, Y.-W., Yi, C., & Wang, W. (2015) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2015.06.042 · Cited by 45 · see citing works
Thermal-flow characteristics of the new wave-finned flat tube bundles in air-cooled condensers
Yang, L., Tan, H., Du, X., & Yang, Y. (2011) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2011.11.002 · Cited by 47 · see citing works
Optimization design and experimental study of thermoelectric dehumidifier
Yu, Y., Sun, Y., Sun, D., Sang, C. C., Sun, M., Shen, L., & Chen, H. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.172 · Cited by 46 · see citing works
Su, W., Li, W., & Zhang, X. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.06.059 · Cited by 43 · see citing works
Zhang, Y., Zhang, G.-M., Zhang, A., Jin, Y., Ru, R.-R., & Tian, M.-C. (2018) · Energies · doi:10.3390/en11102642 · Cited by 37 · see citing works
Zhang, L., Jiang, Y., Dong, J., Yao, Y., & Deng, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114063 · Cited by 40 · see citing works
Lenic, K., Trp, A., & Frankovic, B. (2009) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2008.12.030 · Cited by 38 · see citing works
A new method of defrosting evaporator coils
Mader, G., & Thybo, C. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.01.033 · Cited by 37 · see citing works
Huang, J.-M., Hsieh, W.-C., Ke, X.-J., & Wang, C.-C. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.06.020 · Cited by 41 · see citing works
Tso, C.-P., Cheng, Y., & Lai, A. (2006) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2005.09.018 · Cited by 38 · see citing works
Numerical modeling of pin–fin micro heat exchangers
Galvis, E., Jubran, B. A., Behdinan, F. X. K., & Fawaz, Z. (2007) · Heat and Mass Transfer · doi:10.1007/s00231-007-0291-2 · Cited by 31 · see citing works
Zhang, L., Song, M., Hosseini, S. H., Shen, J., & Jiang, Y. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.122093 · Cited by 29 · see citing works
Yoo, J., Chung, Y., Kim, G. T., Song, C.-W., Yoon, P., Sa, Y., & Kim, M. S. (2018) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2018.08.014 · Cited by 22 · see citing works
Jeong, H., Han, S.-C., Djajadiwinata, E., Kim, P.-H., & Lee, Y.-H. (2008) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-007-1216-1 · Cited by 27 · see citing works
Aljuwayhel, N. F., Reindl, D. T., Klein, S. A., & Nellis, G. F. (2008) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2007.05.010 · Cited by 25 · see citing works
Song, K. S., Yun, S., Lee, D., Kim, K., & Kim, Y. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.119408 · Cited by 25 · see citing works
Review and prospect of air source heat pump research: A bibliometric insight
Jiang, S., Zhao, H., & Ni, L. (2024) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2024.11.029 · Cited by 20 · see citing works
Flat tube heat exchangers: Experimental analysis of frosting and water retention
Westhaeuser, J., Brauchle, L., Albrecht, J.-C., Tegethoff, W., Lemke, N., & Koehler, J. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119319 · Cited by 24 · see citing works
Lee, M., Kang, T., Joo, Y., & Kim, Y. (2011) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2010.08.013 · Cited by 24 · see citing works
Macchitella, S., Colangelo, G., & Starace, G. (2023) · Energies · doi:10.3390/en16041948 · Cited by 22 · see citing works
Experimental study of the characteristic of frosting on low-temperature air cooler
Haijie, Q., Li, W., Bo, D., Zhihai, Z., & Weiying, Z. (2014) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2014.02.021 · Cited by 22 · see citing works
Lin, Y., Sun, Y., Luo, J., Wei, W., Wang, W., Luo, Q., Liu, S., & Deng, S. (2023) · Energy and Buildings · doi:10.1016/j.enbuild.2023.112814 · Cited by 21 · see citing works
Investigation of flow and heat transfer for a split air conditioner indoor unit
Kumlutaş, D., Karadeniz, Z. H., & Kuru, F. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.08.051 · Cited by 21 · see citing works
Chen, J., Wu, J., He, J., & Guo, Z. (2022) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2021.11.008 · Cited by 20 · see citing works
Modeling and Analysis of Frost Growth in Pilot-Scale Ambient Air Vaporizer
Lee, Y.-K., Park, J., & Han, C. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b03480 · Cited by 19 · see citing works
Robust design of ambient-air vaporizer based on time-series clustering
Lee, Y.-K., Na, J., & Lee, W. B. (2018) · Computers and Chemical Engineering · doi:10.1016/j.compchemeng.2018.08.026 · Cited by 12 · see citing works
Ye, H.-Y., Park, J., & Lee, K.-S. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.08.069 · Cited by 17 · see citing works
Modeling the airside dynamic behavior of a heat exchanger under frosting conditions
Gao, T., & Gong, J. (2011) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-011-0615-5 · Cited by 16 · see citing works
Analysis of the heat transfer area distribution in a frosted plain fin-and-tube geometry
Morales-Fuentes, A., Chapa-Contreras, O. M., Méndez-Díaz, S., & Belman-Flores, J. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2017.01.016 · Cited by 15 · see citing works
Liao, C., Zeng, L., Long, J., & Yongga, A. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119684 · Cited by 15 · see citing works
Generalized lattice Boltzmann model for frosting.
Lei, T.-M., Luo, K. H., & Wu, D. (2019) · Physical Review E · doi:10.1103/physreve.99.053301 · Cited by 11 · see citing works
Experimental Study of Frost Growth Characteristics on Surface of Fin-tube Heat Exchanger
Liping, X., Xianmin, G., & Xing, Z. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1039 · Cited by 13 · see citing works
Heidinger, G. G., do Nascimento, S. M., Gaspar, P. D., & da Silva, P. D. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.04.038 · Cited by 13 · see citing works
Robust hybrid diffusion control for long-term scalable frost prevention
Machado, C., Stern, B. J., Huang, H., Meem, A. U. H., Huang, J., & Park, K. (2024) · Science Advances · doi:10.1126/sciadv.adq8525 · Cited by 12 · see citing works
Wu, L., Zhang, L., Jiang, J., Zhang, X., Shen, J., & Song, M.-J. (2024) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2024.108040 · Cited by 11 · see citing works
Ni, C., Wang, T., Jiang, B., & Yang, F. (2019) · Science and Technology for the Built Environment · doi:10.1080/23744731.2019.1623587 · Cited by 8 · see citing works
Rohani, H., & Woo, P. C. (2023) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2023.106992 · Cited by 8 · see citing works
Mahdavi, M., & Yaghoubi, M. A. (2011) · Heat Transfer-Asian Research · doi:10.1002/htj.20397 · Cited by 6 · see citing works
Tso, C. P., Cheng, Y. C., & Lai, A. C. K. (2006) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2005.09.012 · Cited by 6 · see citing works
Modeling and performance analyses of fin-and-tube heat exchanger operating under frost conditions
Chen, Y., Jiang, Q., Yang, J.-C., Hou, J., & Wu, X. (2016) · International Journal of Low-Carbon Technologies · doi:10.1093/ijlct/ctw004 · Cited by 6 · see citing works
Ma, C., Ge, X., Zheng, H., Song, M., Sheng, W., Chen, X.-Z., Fu, D.-Y., & Dang, C.-B. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.127205 · Cited by 5 · see citing works
Chen, N., Xu, L., Feng, H. D., & Yang, C. G. (2004) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2004.04.012 · Cited by 5 · see citing works
Indoor thermal comfort analysis during dynamic frosting-defrosting process of air source heat pumps
Wang, W., Ren, J., Tan, Y., Luo, Z., Wei, W., Jin, X., Sun, Y., & Zhang, C. (2025) · Building and Environment · doi:10.1016/j.buildenv.2025.114100 · Cited by 4 · see citing works
Carvajal-Mariscal, I., León-Ruiz, J. E. D., Belman-Flores, J., Martínez-Espinosa, E., & José-Pineda, O. (2023) · Frontiers of Mechanical Engineering · doi:10.3389/fmech.2023.1101425 · Cited by 5 · see citing works
Bayrak, E., Çağlayan, A., & Konukman, A. E. Ş. (2017) · Heat and Mass Transfer · doi:10.1007/s00231-017-2055-y · Cited by 3 · see citing works
Lee, M., Lee, S., Jung, H.-W., Kim, Y., & Park, J.-J. (2010) · Transactions of the Korean Society of Mechanical Engineers B · doi:10.3795/ksme-b.2010.34.12.1071 · Cited by 3 · see citing works
Moerman, F. T., & Fikiin, K. A. (2015) · Advances in mechatronics and mechanical engineering (AMME) book series · doi:10.4018/978-1-4666-8398-3.ch018 · Cited by 2 · see citing works
Farzaneh, M., Zgheib, N., Balachandar, S., & Sherif, S. A. (2025) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2024.0366 · Cited by 2 · see citing works
Tahavvor, A., & Hosseini, S. (2015) · Iranian Journal of Science and Technology Transactions of Mechanical Engineering · doi:10.22099/ijstm.2015.2999 · Cited by 4 · see citing works
Wang, S., Ke, H., Li, X., & Cheng, S. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.12.010 · Cited by 2 · see citing works
Dynamic modeling and simulation of frost and defrost conditions for refrigeration systems
Gonzales, L. M. (2015) · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · Cited by 2 · see citing works
Jakończuk, P., Śmierciew, K., Gagan, J., & Butrymowicz, D. (2022) · Sustainability · doi:10.3390/su142113731 · Cited by 2 · see citing works
Lin, Z.-M., Hou, Y.-F., Wu, L.-K., & Wang, L.-B. (2026) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2026.129176 · Cited by 1 · see citing works
Wang, Y., Zheng, W., Wu, W., Jiang, Y., & Sun, C. (2025) · Energy · doi:10.1016/j.energy.2025.138423 · Cited by 1 · see citing works
Wang, S.-Q., Wei, W.-Z., Luo, J., Wang, W., Sun, Y.-Y., Li, Z.-Y., Zhu, W., & Deng, S. (2025) · Energy and Buildings · doi:10.1016/j.enbuild.2025.116558 · Cited by 1 · see citing works
Shangguan, S., Sun, P., Wang, L., Liu, B.-W., & Li, Y.-Z. (2025) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2025.109765 · Cited by 2 · see citing works
Lee, M.-Y. (2012) · Advances in Mechanical Engineering · doi:10.1155/2012/863731 · Cited by 2 · see citing works
Lee, S. H., Yoon, W. J., Kim, Y., Lee, M., & Yun, S. (2013) · Transactions of the Korean Society of Mechanical Engineers B · doi:10.3795/ksme-b.2013.37.3.205 · Cited by 1 · see citing works
Previous related work: A review
Song, M., & Deng, S.-M. (2019) · Defrosting for Air Source Heat Pump · doi:10.1016/b978-0-08-102517-8.00002-3
Studies of an air cooler under frost condition
Cheng, Y. C. (2019) · doi:10.32657/10356/6557
“Yan et al. (2003) further explained that the surface temperature become colder as the air velocity decreased.”
BackgroundMethodResultInfluentialThe performance test of heat exchanger under low-temperature frosting conditions
Wang, Z., & Tong, Z. (2013) · International Conference on Advanced Mechatronic Systems · doi:10.1109/icamechs.2013.6681795
The Experimental Study of Thermodynamic Performance on R407C Air-Conditioner Hot Water Combined Unit
Hu, H. S., Wang, F., Yu, J. Z., & Hao, W. (2011) · Key engineering materials · doi:10.4028/www.scientific.net/kem.467-469.549
Study on The Effect of Different Plenum Chamber Coefficients on Frosting of Air-cooler
Liu, B., Shi, S., Liu, Y., Bennacer, R., Chen, A.-Q., & Theodorakis, P. (2021) · E3S Web of Conferences · doi:10.1051/e3sconf/202132104019
Effects of secondary fluid flow rate on cooling performance of vapor compression systems
Afsharı, F., Çiloğlu, D., Ceviz, M. A., & Ceylan, M. (2021) · Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi · doi:10.17714/gumusfenbil.891882
Effect of Different Plenum-Chamber Coefficients on the Frosting of Air-Cooler
Liu, B., Shi, S., Liu, Y., Bennacer, R., Chen, A., & Theodorakis, P. E. (2022) · Energies · doi:10.3390/en15020422
Experimental case studies of frosting on surface of finned tube heat exchangers in an ASHP unit
Song, M., & Zhang, L. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95457-0.00001-0
Demirhan, K., Abdusoglu, A., Yakut, E. M., Başol, A. M., & Arık, M. (2026) · Lecture notes in mechanical engineering · doi:10.1007/978-3-032-16138-3_8
Effects of refrigerant charge on dynamic frosting performance of air-source heat pumps
Wang, S., Wei, W., Yuan, S., Wang, W., Yan, S., Ma, G., Li, Z., & Deng, S. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132408
Wei, W.-Z., Guo, Y.-T., Dai, C.-M., Wang, W., Jiang, Z.-K., Sun, Y.-Y., Zhang, C.-X., Teng, W., & Luo, Z. (2026) · Journal of Building Engineering · doi:10.1016/j.jobe.2026.117216
Effect of air velocity and fin spacing on the frosting pattern and heat transfer in fin channels
Demirhan, K., Abdusoglu, A., Yakut, E. M., Başol, A., & Arik, M. (2026) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2026.107115
- Authors
- Yan, W.-M., Li, H.-Y., Wu, Y.-J., Lin, J.-Y., & Chang, W.-R.
- Affiliations
- Huafan University (TW)
- Industrial Technology Research Institute (TW)
- Corresponding author
- Yan, Wei-Mon
- Venue
- International Journal of Heat and Mass Transfer
- Publisher
- Elsevier BV
- Published
- 2003-02
- Volume
- 46
- Issue
- 5
- Pages
- 871-877
- ISSN
- 0017-9310 (ISSN-L)
- OpenAlex
- W2006413981
- Cited by
- 95
- References
- 5
- Citations by year
- 2026: 5 · 2025: 6 · 2024: 4 · 2023: 4 · 2022: 4 · 2021: 4 · 2020: 1 · 2019: 6 · 2018: 6 · 2017: 8 · 2016: 2 · 2015: 6 · 2014: 5 · 2013: 4 · 2012: 5
- FWCI
- 6.11
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- International Journal of Heat and Mass Transfer (publishedVersion)
- Funders
- National Science Council
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Optimization
- Physical Sciences › Engineering › Mechanical Engineering › Refrigeration and Air Conditioning Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer Mechanisms
- Keywords
- finned tube heat exchanger, frost formation, fin spacing, relative humidity, air temperature, refrigerant temperature, air flow rate, heat transfer coefficient, pressure drop, heat transfer rate
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
