An experimental study of frost formation on a horizontal cylinder under cross flow
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
Abdel-Wahed et al. and Lee and Ro found no sign of a critical Reynolds number.
“Abdel-Wahed et al. (1984) took their data for the range of Reynolds number from 3000 to 140000 while Lee and Ro (2001) range from 10430 to 18200, but both results showed no sign of critical Reynolds number.”
From Studies of an air cooler under frost condition (2019) · cites this paper as Lee and Ro (2001)
Frost thickness at the windward and leeward stagnation points of a cylinder under cross flow are both larger than those at the top and bottom surfaces of the cylinder, which are close to the separation points.
“Lee and Ro [124] found out that frost thickness at the windward and leeward stagnation points were both larger than those at the top and bottom surfaces of cylinder, which were close to the separation points.”
From Frosting mechanism and behaviors on surfaces with simple geometries: A state-of-the-art literature review (2022) · cites this paper as [124]
Cites
Fundamentals of Heat and Mass Transfer
Incropera, F. P. (1985) · Cited by 3,679 · see citing works
Study of frost properties correlating with frost formation types
Hayashi, Y., Aoki, A., Adachi, S., & Hori, K. (1977) · Journal of Heat Transfer · doi:10.1115/1.3450675 · Cited by 402 · see citing works
A one-dimensional model for frost formation on a cold flat surface
Lee, K.-S., Kim, W.-S., & Lee, T.-H. (1997) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(97)00074-4 · Cited by 296 · see citing works
(1967) · ASHRAE winter conference papers · Cited by 128 · see citing works
A semi-empirical transient method for modelling frost formation on a flat plate
Sherif, S. A., Raju, S. P., Padki, M. M., & Chan, A. B. (1993) · International Journal of Refrigeration · doi:10.1016/0140-7007(93)90004-r · Cited by 52 · see citing works
Study on Properties and Growth Rate of Frost Layers on Cold Surfaces
Tokura, I., Saito, H., & Kishinami, K. (1983) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3245679 · Cited by 50 · see citing works
Prediction of growth rate and density of frost layer developing under forced convection
Tokura, I., Saito, H., & Kishinami, K. (1988) · Wärme- und Stoffübertragung · doi:10.1007/bf01377254 · Cited by 22 · see citing works
HONG, K., Weckman, D. C., & Strong, A. B. (1998) · Canadian Metallurgical Quarterly · doi:10.1016/s0008-4433(97)00021-9 · Cited by 11 · see citing works
The characteristics of frost growth on parallel plates
Han, H. D., & Ro, S. T. (1999) · Lecture notes in physics · doi:10.1007/bfb0104171 · Cited by 7 · see citing works
Self-citationFROST FORMATION ON COOLED PARALLEL PLATES IN LAMINAR FORCED CONVECTION
Lüer, A., & Beer, H. (1998) · International Heat Transfer Conference (IHTC) · doi:10.1615/ihtc11.1010 · Cited by 2 · see citing works
Flagged first, then by citations
Cited by
Sorted by citations
Review on improvement for air source heat pump units during frosting and defrosting
Song, M., Deng, S., Dang, C., Mao, N., & Wang, Z. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.022 · Cited by 384 · see citing works
Review on the measurement and calculation of frost characteristics
Song, M., & Dang, C. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.03.094 · Cited by 212 · see citing works
Yao, Y., Jiang, Y., Deng, S., & Ma, Z. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.03.013 · Cited by 196 · see citing works
Research of anti-frosting technology in refrigeration and air conditioning fields: A review
Feng, W., Liang, C.-H., & Zhang, X. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.08.046 · Cited by 142 · see citing works
<i>Review Article:</i> A Critical Review of Properties and Models for Frost Formation Analysis
Iragorry, J., Tao, Y.-X., & Jia, S. (2004) · HVAC&R Research · doi:10.1080/10789669.2004.10391111 · Cited by 89 · see citing works
“Another type of empirical correlation was presented by Mao et al. (1992, 1999) [K7, K12 in Table 1], who obtained a set of equations of the frost transport properties in the form of the product of the involved dimensionless parameters elevated to a certain power, based on experimental results. Shin et al. (2003) [K14]…”
BackgroundInfluentialWang, W., Xiao, J., Feng, Y., Guo, Q., & Wang, L.-C. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.06.019 · Cited by 83 · see citing works
“Some methods have been applied in the laboratory to measure the frost thickness directly, like infrared camera [16], low energy laser beam [17], microscope [18e20], micrometer [21,22].”
MethodZhang, L., Song, M., Deng, S., Shen, J., & Dang, C. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.118984 · Cited by 83 · see citing works
Influence of Outdoor Air Conditions on the Air Source Heat Pumps Performance
Vocale, P., Morini, G. L., & Spiga, M. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.01.070 · Cited by 79 · see citing works
Song, M., Gong, G., Mao, N., Deng, S., & Wang, Z. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.01.068 · Cited by 72 · see citing works
Review of restraint frost method on cold surface
Sheng, W., Liu, P.-P., Dang, C., & Liu, G.-X. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.088 · Cited by 71 · see citing works
Ge, Y., Sun, Y., Wang, W., Zhu, J., Li, L., & Liu, J. (2016) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2015.07.004 · Cited by 68 · see citing works
Modeling non-uniform frost growth on a fin-and-tube heat exchanger
Padhmanabhan, S. K., Fisher, D. E., Cremaschi, L., & Moallem, E. (2011) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2011.06.005 · Cited by 66 · see citing works
Frost formation from general-low to ultra-low temperatures: A review
Byun, S., Jeong, H., Son, H., Kim, D. R., & Lee, K.-S. (2022) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2022.123164 · Cited by 65 · see citing works
Dimensionless correlations of frost properties on a cold cylinder surface
Kim, J.-S., Yang, D.-K., & Lee, K.-S. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2008.01.007 · Cited by 57 · see citing works
Zheng, X., Shi, R., You, S.-J., Han, Y., & Shi, K. (2019) · Sustainable cities and society · doi:10.1016/j.scs.2019.101667 · Cited by 46 · see citing works
Kim, K.-H., Ko, H.-J., Kim, K., Kim, Y.-W., & Cho, K.-J. (2009) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2008.10.015 · Cited by 47 · see citing works
Heat transfer––a review of 2001 literature
Goldstein, R. J., Eckert, E. R. G., Ibele, W. E., Patankar, S. V., Simon, T. W., Kuehn, T. H., Strykowski, P. J., Tamma, K. K., Heberlein, J. V. R., Davidson, J. H., et al. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(02)00529-x · Cited by 46 · see citing works
“The final roughness paper discusses roughness due to ice formation [112].”
BackgroundControl strategy and experimental study on a novel defrosting method for air-source heat pump
Liang, C., Zhang, X., Li, X., & Chen, Z. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2009.12.022 · Cited by 44 · see citing works
Improving the frosting and defrosting performance of air source heat pump units: review and outlook
Song, M., Dong, J., Wu, C., Jiang, Y., & Qu, M. (2017) · HKIE Transactions · doi:10.1080/1023697x.2017.1313134 · Cited by 53 · see citing works
“When this happens, it may change the structure of the frost layer, increase its density and enhance its thermal conductivity [75].”
BackgroundBai, X.-S., Wang, W., Sun, Y.-Y., Liu, J.-D., Ge, Y.-J., & Deng, S. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.07.054 · Cited by 37 · see citing works
Feng, W., Liang, C.-H., Zhang, X., & Zhang, Y. (2018) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2018.01.022 · Cited by 32 · see citing works
Tahavvor, A., & Yaghoubi, M. (2010) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2010.06.004 · Cited by 35 · see citing works
An experimental study on frosting of laminar air flow on a cold surface with local cooling
Kwon, J.-T., Lim, H. J., Kwon, Y.-C., Koyama, S., Kim, D.-H., & Kondou, C. (2006) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2005.12.009 · Cited by 35 · see citing works
Choi, S.-G., & Kim, S. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.05.033 · Cited by 25 · see citing works
Experimental study of frost growth on a horizontal cold surface under forced convection
Huang, L., Liu, Z., Liu, Y.-M., & Gou, Y. (2010) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-010-0410-8 · Cited by 27 · see citing works
“However, Lee and Ro [17] found that the frost layer thickness increases significantly with the ambient temperature as the air temperature varies in the range of 9.”
BackgroundResultBenítez, T., & Sherif, S. A. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2017.01.026 · Cited by 27 · see citing works
Characteristics of frost formation on two-dimensional fins and its empirical correlations
Kim, K., Kim, J.-S., & Lee, K.-S. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.02.043 · Cited by 25 · see citing works
A novel defrosting control strategy with image processing technique and fractal theory
Miao, H.-F., Yang, X., Yin, D.-Z., Zheng, W.-D., Zhang, H., Zhang, S., & Liu, Z. (2022) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2022.03.002 · Cited by 24 · see citing works
Experimental study of the characteristic of frosting on low-temperature air cooler
Haijie, Q., Li, W., Bo, D., Zhihai, Z., & Weiying, Z. (2014) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2014.02.021 · Cited by 22 · see citing works
“Some basic studies have been carried out to investigate the frosting formation on the simple-shaped cold surfaces, in which the process and mechanism of the frosting growth [2–6] and the shape transformation of frost [7–11] were mentioned.”
BackgroundZhao, H., Li, P., Li, J., Liu, Z., Sang, Y., Ye, T., & Zheng, W. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.124444 · Cited by 21 · see citing works
Analysis of early-stage frost formation in natural convection over a horizontal cylinder
Tahavvor, A., & Yaghoubi, M. (2009) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2009.02.002 · Cited by 22 · see citing works
Lai, T., Ding, P., Dong, X., Zhang, B., Chen, X., & Hou, Y. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115075 · Cited by 18 · see citing works
Experimental investigation of frost formation on a horizontal cold cylinder under cross flow
Barzanoni, Y., Noorshams, O., Tabrizi, H., & Damangir, E. (2011) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2011.02.011 · Cited by 16 · see citing works
Zhang, Y., He, F., Wang, Y., Li, C., Zhang, G.-M., & Zhou, D. (2025) · Renewable & Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115877 · Cited by 16 · see citing works
A visual defrosting control method for air source heat pump system based on machine vision
Zhao, H., Liu, Z., Sang, Y., Chang, J., Zheng, X., Jurasz, J., & Zheng, W. (2024) · Energy · doi:10.1016/j.energy.2024.131778 · Cited by 12 · see citing works
Development and validation of a numerical model for frost growth based on nucleation theory
Qiu, G., Li, S., Shi, Y., Fang, X., & Cai, W. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.125137 · Cited by 13 · see citing works
New frost property correlations for a flat-finned-tube heat exchanger
Getu, H. M., & Bansal, P. K. (2011) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2010.11.007 · Cited by 12 · see citing works
Song, M., Tian, Y., Zhang, L., Dang, C., Hu, Y., Xu, Y., Shen, L., & Zhan, T. (2023) · International Journal of Green Energy · doi:10.1080/15435075.2023.2199329 · Cited by 11 · see citing works
Correlation for frost properties on a cold cylinder surface in cross flow
Barzanoni, Y., Tabrizi, H. B., Noorshams, O., & Eftekhari, H. (2012) · Heat and Mass Transfer · doi:10.1007/s00231-012-0993-y · Cited by 10 · see citing works
“Lee and Ro [4] preformed experiments over cold cylinder and kept the dew point of water vapor below the freezing point.”
BackgroundMethodResultInfluentialInfluence of Frost Growth and Migration in Cryogenic Heat Exchanger on Air Refrigerator
Yang, S., Liu, Z., Fu, B., & Chen, Y. (2019) · Applied Sciences · doi:10.3390/app9040753 · Cited by 8 · see citing works
“, When the temperature of the cold surface is low, the frost will grow rapidly and the physical properties stabilized soon [26,27].”
BackgroundWang, F., Dai, F., Liang, C., & Zhang, X. (2022) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2022.102617 · Cited by 8 · see citing works
A waste cryogenic energy assisted freshwater generator for marine applications
Liu, M.-X., Wu, D.-W., Tsolakis, A., & Gao, W. (2021) · Desalination · doi:10.1016/j.desal.2020.114898 · Cited by 7 · see citing works
The research of optical fiber frost sensor and intelligent refrigerator defrost system
Zhang, L.-H., Zhang, J., Li, H.-W., & Hu, Q. (2012) · 2012 IEEE 11th International Conference on Signal Processing · doi:10.1109/icosp.2012.6492017 · Cited by 4 · see citing works
Fang, Z.-S., Wang, H.-H., Zhang, J., & Wu, W.-W. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.12.030 · Cited by 7 · see citing works
A modified CFD model for frosting on a horizontal plate
Cai, W.-H., Fang, X.-S., Li, S., & Qiu, G.-D. (2024) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2024.125726 · Cited by 5 · see citing works
Xiang, M., Wang, F., Wang, Z., & Yang, W.-B. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.122050 · Cited by 5 · see citing works
Frost distribution characteristics of laminar airflow on cold surface of mini-channels
Kwon, J., Kim, D., Huh, C., Koyama, S., & Kwon, Y.-C. (2011) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2011.04.007 · Cited by 3 · see citing works
Modeling Frost Growth for Subcooled Tube-Array Configurations
Yadav, V., Moon, C., & Kant, K. (2009) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3082424 · Cited by 3 · see citing works
The effect of surface wettability on frost growth and densification on flat plates
ElCheikh, A. (2013) · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · Cited by 3 · see citing works
Xia, Y., Hrnjak, P., & Jacobi, A. M. (2006) · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · Cited by 3 · see citing works
Prediction and Evaluation of Frosting Surface on Cylindrical Structure Using Growth Rate Model
Park, S., Kihara, H., & Abe, K. (2023) · International Journal of Aeronautical and Space Sciences · doi:10.1007/s42405-023-00568-6 · Cited by 2 · see citing works
“The initial conditions were taken from the related studies [27, 50, 51].”
BackgroundMethodInfluentialReverse cycle defrosting case studies for multicircuit outdoor coil
Song, M., & Zhang, L. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95457-0.00011-3 · Cited by 2 · see citing works
Tahavvor, A., & Hosseini, S. (2015) · Iranian Journal of Science and Technology Transactions of Mechanical Engineering · doi:10.22099/ijstm.2015.2999 · Cited by 4 · see citing works
“Many researchers presented numerical and experimental models to predict frosting process over a circular cylinder subjected to humid air cross [2-6].”
BackgroundDynamic modeling and simulation of frost and defrost conditions for refrigeration systems
Gonzales, L. M. (2015) · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · Cited by 2 · see citing works
Experimental study of natural frost formation on a horizontal cylinder
Yaghoubi, M., & Khoshnazar, H. (2010) · AIAA/ASME Joint Thermophysics and Heat Transfer Conference · doi:10.2514/6.2010-4659 · Cited by 1 · see citing works
Previous related work: A review
Song, M., & Deng, S.-M. (2019) · Defrosting for Air Source Heat Pump · doi:10.1016/b978-0-08-102517-8.00002-3
Introdução aos procedimentos de elementos finitos aplicados a Teoria de Vigas de Timoshenko
das Neves, N. S. (2019) · Editora Poisson eBooks · doi:10.36229/978-85-7042-163-0.cap.18 · Cited by 1 · see citing works
Studies of an air cooler under frost condition
Cheng, Y. C. (2019) · doi:10.32657/10356/6557
“These observations did not agree with other investigators such as Abdel-Wahed et al. (1984) and Lee and Ro (2001).”
BackgroundResultFrost Formation on a Cold Cylindrical Surface in Cross Flow
Lee, K.-S., Lee, D.-H., & Yang, D.-K. (2004) · Transactions of the Korean Society of Mechanical Engineers B · doi:10.3795/ksme-b.2004.28.8.989
Mirzaei, M., & Fazeli, H. R. (2011) · International Conference on Modeling, Simulation, and Applied Optimization · doi:10.1109/icmsao.2011.5775542
“Many researches numerically and experimentally predicted the frost formation on flat plates, cylinders, tubes, parallel plates.”
BackgroundMechanism of Frost Formation and Growth over a Compact Finned-tube
Mahdavi, M., Yaghoubi, M. A., & Hirbodi, K. (2014)
Numerical Analysis of the Channel Wheel Fresh Air Ventilator Under Frosting Conditions
Bing, G., Dong, Z., Cheng, Z. Y., & Luo, E. C.-R. (2006) · OakTrust (Texas A&M University Libraries)
Desenvolvimento de Argila Verde Organofílica aplicada ao processo de remoção óleo/água
de Oliveira, L. A., & Rodrigues, M. G. F. (2019) · Editora Poisson eBooks · doi:10.36229/978-85-7042-163-0.cap.15
Cozza, R. C. (2019) · Editora Poisson eBooks · doi:10.36229/978-85-7042-163-0.cap.02
de Melo, J. M. P., de Araújo, R. D. S. G., Ferreira, D. S., Avelino, F. P., Araújo, T. D. S., Soares, R. A. L., Viana, M. M., & Gomes, H. M. A. (2019) · Editora Poisson eBooks · doi:10.36229/978-85-7042-163-0.cap.05
A mobilidade no cenário do desenvolvimento urbano sustentável
Ramos, D. V., Machado, A. F., Callefi, M. H. B. M., Campos, J. F., & Chicati, M. L. (2019) · Editora Poisson eBooks · doi:10.36229/978-85-7042-163-0.cap.21
Lima, P. H. P., Vieira, L. D. G. F., Brasileiro, M. I., & Neiva, L. S. (2019) · Editora Poisson eBooks · doi:10.36229/978-85-7042-163-0.cap.23
Reologia aplicada no estudo e avaliação de reações de produção de Biodiesel
Neto, P. A. T., de Paula, C. C., de Freitas, M. L., da Silva, F. T., & Câmara, L. D. T. (2019) · Editora Poisson eBooks · doi:10.36229/978-85-7042-163-0.cap.01
Cosme, J., Fernandes, G., & Fernandes, D. P. (2019) · Editora Poisson eBooks · doi:10.36229/978-85-7042-163-0.cap.16
da Silva, D. A. B., & Cozza, R. C. (2019) · Editora Poisson eBooks · doi:10.36229/978-85-7042-163-0.cap.09
Estudo numérico e experimental da estampagem a quente do aço 22MnB5 em geometria axial
de Costa, L. D. L., Brito, A. M. G., Rosiak, A., & Schaeffer, L. (2019) · Editora Poisson eBooks · doi:10.36229/978-85-7042-163-0.cap.08
Kudlanvec, V. L., Canalle, R., Nunes, T. K. L., de Resende, E. C. R. C., & da Silva, M. D. S. C. (2020) · Editora Poisson eBooks · doi:10.36229/978-65-86127-45-4.cap.13
Boaventura, B. D. S., & Finzer, J. R. D. (2020) · Editora Poisson eBooks · doi:10.36229/978-65-86127-45-4.cap.10
Molke, A. S., dos Santos, A. Z., Benatti, C. T., Tavares, C. R. G., Lima, O. C. D. M., & Syllos, R. S. D. (2020) · Editora Poisson eBooks · doi:10.36229/978-65-86127-45-4.cap.06
As competências transversais nas disciplinas de projetos de instalações elétrica
Radüns, C. D., Reimbold, M. M. P., Zampieri, N. L. V., & Pravia, Z. M. C. (2020) · Editora Poisson eBooks · doi:10.36229/978-65-86127-45-4.cap.14
Análise de duas conformações de leito fluidizado 3D para minério de ferro
Artur, A. P. S., da Silva, E. C. B., Cardozo, T. T. M., Laizo, W. S., Lacerda, A. F., & Lourenço, R. D. O. (2020) · Editora Poisson eBooks · doi:10.36229/978-65-86127-45-4.cap.08
Formação de gelo poroso em placas planas com diferentes acabamentos superficiais
Biglia, F. M., Bartmeyer, G. A., Fachini, L. V. G., da Silva, R. D. C. R., & Alves, T. A. (2020) · Editora Poisson eBooks · doi:10.36229/978-65-86127-45-4.cap.11
Gaseificador de leito fluidizado borbulhante para conversão de biomassa
Loureiro, E. C. D. M., Garrett, I. D. A., & da Silva, S. P. R. (2020) · Editora Poisson eBooks · doi:10.36229/978-65-86127-45-4.cap.07
Pereira, C. F., Costa, Á. J. D. S., Santos, H. S. D. S., & Júnior, J. R. R. S. (2019) · Editora Poisson eBooks · doi:10.36229/978-85-7042-163-0.cap.12
Aparato para a realização de ensaios triaxiais verdadeiros com capacidade dinâmica
Armelin, J. L. (2019) · Editora Poisson eBooks · doi:10.36229/978-85-7042-163-0.cap.17
Utilização de telemetria para diagnostico automotivo à distância
Teixeira, F. C. R., & Tournier, D. R. (2019) · Editora Poisson eBooks · doi:10.36229/978-85-7042-163-0.cap.19
Engenharia no Século XXI - Volume 14
(2020) · Editora Poisson eBooks · doi:10.36229/978-65-86127-45-4
Maquiné, T. M., Lima, M. C. G. D. A., de Oliveira, P. A., Neto, J. C. D. M., Bruno, E. R. L., & Pessoa, S. D. J. (2019) · Editora Poisson eBooks · doi:10.36229/978-85-7042-163-0.cap.11
A importância do tratamento do caldo de cana-de-açúcar para a produção de açúcar e etanol
Nunes, T. D. S., & Finzer, J. R. D. (2020) · Editora Poisson eBooks · doi:10.36229/978-65-86127-45-4.cap.02
Engenharia no Século XXI – Volume 9
(2019) · Editora Poisson eBooks · doi:10.36229/978-85-7042-163-0
Estudio numérico y experimental de la formación de escarcha en placas planas de aluminio y cobre
Biglia, F. M., Dimbarre, V. V., Bartmeyer, G. A., da Silva, R., & Alves, T. A. (2022) · Congreso Iberoamericano de Ingeniería Mecánica (CIBIM) · doi:10.5944/bicim2022.238
Biglia, F. M., Dimbarre, V. V., & Alves, T. A. (2023) · Anais do Congresso Internacional de Engenharia Mecânica e Industrial · doi:10.29327/conemi23.678607
Song, M., & Zhang, L. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95457-0.00009-5
Measurement and calculation of frost characteristics on cold surfaces
Song, M., & Zhang, L. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95457-0.00006-x
High-efficiency frost-free air source heat pumps
Zhang, P., Wang, Z., Ma, L., & Wang, F. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-15495-9.00017-4
Superhydrophobic coatings for antifrosting
Zhang, L., Qi, R., Cai, R., & Dong, C. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-34195-3.00010-9
Heat transfer characteristics of a protruded flat surface under frost formation
Abdusoglu, A., Demirhan, K., Yakut, E. M., Başol, A., & Arik, M. (2026) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2026.112473
Study of frosting characteristics on plate surface under wide-range convection
Zhang, D., Yuan, X.-Q., Wang, Y., He, Z., Li, Z., & Liu, B. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132754
- Authors
- Lee, Y. B., & Ro, S. T.
- Affiliations
- Seoul National University (KR)
- Corresponding author
- Ro, S.T
- ORCID
- Lee, Y.B
- Venue
- International Journal of Refrigeration
- Publisher
- Elsevier BV
- Published
- 2001-09
- Volume
- 24
- Issue
- 6
- Pages
- 468-474
- ISSN
- 0140-7007 (ISSN-L)
- OpenAlex
- W2090273246
- Cited by
- 95
- References
- 10
- Citations by year
- 2026: 3 · 2025: 3 · 2024: 6 · 2023: 5 · 2022: 5 · 2020: 11 · 2019: 18 · 2018: 3 · 2017: 7 · 2015: 3 · 2014: 4 · 2013: 2 · 2012: 3
- FWCI
- 3.77
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- International Journal of Refrigeration (publishedVersion)
- Funders
- Seoul National University
- Topics
- Physical Sciences › Engineering › Aerospace Engineering › Icing and De-icing Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Optimization
- Physical Sciences › Engineering › Computational Mechanics › Fluid Dynamics and Vibration Analysis
- Keywords
- frost formation, horizontal cylinder, crossflow, forced convection, frost thickness, local heat flux, flow separation, surface temperature distribution, inlet air velocity, inlet air temperature, inlet air humidity, dew point
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
