Aliphatic Polyester Block Polymer Design
Open accessThe DOI matches its Crossref record; 83 of the 84 references it cites were found in a registry or an index; 9 of the 64 sources its claims cite were checked for support.
Abstract
Abstract Aliphatic polyester block polymers constitute a highly useful and amazingly versatile class of self-assembled materials. Analogous to styrenic block polymers in both design and function, the property profiles of these degradable materials can be precisely tailored by altering the chemical structure of the components. Driven by this ideal, we have examined the impact of n-alkyl substituents on the polymerization thermodynamics and kinetics of substituted δ-valerolactone monomers and developed guiding design principles based on critical structure–property relationships in the resulting aliphatic polyesters. Under bulk room temperature conditions the polymerization rate depends strongly on substituent position and exhibits a more modest dependence on alkyl length (from −CH3 to −(CH2)8CH3). The enthalpy and entropy of polymerization are significantly influenced by substituent position, but both are largely insensitive to n-alkyl length. However, the physical properties of the resulting aliphatic polyesters depend much more on substituent length than on substituent position. Notably, we demonstrate that polymer entanglement molar mass and solubility parameter can be systematically tuned by changing the substituent length. We discuss how these key structure property relationships can be used to inform the design of advanced sustainable materials for future technologies important in the arena of environmentally friendly materials.
Overview
CoChat Summary
TL;DR
This paper systematically examines n-alkyl substituted δ-valerolactones to establish design rules for aliphatic polyester block polymers. It shows polymerization thermodynamics and kinetics are governed mainly by substituent position, while polymer physical properties such as entanglement molar mass and solubility parameter can be tuned by substituent length without significantly changing the glass transition temperature.
Key findings
- In bulk DPP-catalyzed ROTEP at ~27 °C, polymerization rate depends strongly on substituent position and more modestly on n-alkyl length; δ1 is the slowest methyl-substituted monomer, with an observed rate constant about an order of magnitude smaller than unsubstituted δ-valerolactone, and initiation is at least 10× faster than propagation. The bulk polymerization is pseudo-zero-order in monomer.
- Substituent position significantly affects ΔHp° and ΔSp°, but n-alkyl length has little effect. Room-temperature equilibrium conversions are 98% for α1 and γ1, 91% for β1, and 89% for δ1; the δ-substituted series reaches 89% ± 2% regardless of substituent length. δ1 is the most exothermic and most entropically unfavored among methyl-substituted lactones, and δ7 has the same ΔSp° and ΔHp° as δ1 within error. Substituted monomers are 2–3× more entropically disfavored than δ-valerolactone.
- Entanglement molar mass increases with substituent length at fixed position: Pα1 = 7.7, Pβ1 = 4.3, Pγ1 = 2.2, Pδ1 = 3.4 kg mol⁻¹; Pδ5 = 13.5 kg mol⁻¹, about 4× larger than Pδ1. Solubility parameters are 18.4 J¹/² cm⁻³/² for poly(β1) and 16.8 J¹/² cm⁻³/² for poly(δ5), compared with 19.8 J¹/² cm⁻³/² for PLA. Pδ0 has Tg = −60 °C and Tm = 55 °C; methyl substitution raises Tg to −52 °C and disrupts crystallinity, with no significant Tg change as the n-alkyl chain is lengthened.
- DPP provides controlled polymerization with Đ ≤ 1.20. The authors propose that Pδ1 and Pβ1 are appealing soft blocks for tough plastics and elastomers due to low entanglement molar mass, while higher-entanglement polymers such as Pδ5 are attractive for pressure-sensitive adhesives.
Methods
- Twelve racemic n-alkyl δ-valerolactone monomers were polymerized in bulk at ~27 °C using diphenyl phosphate (DPP) as catalyst and benzyl alcohol (BnOH) as initiator; reactions were quenched with excess triethylamine, and initiation and polymerization were monitored independently by ¹H NMR.
- Thermodynamic parameters ΔHp° and ΔSp° were estimated from the temperature dependence of equilibrium monomer concentration via Van’t Hoff analysis; kinetics were assessed from conversion versus time and t₁/₂ values.
- Entanglement molar mass was estimated from plateau modulus of high molar mass (~100 kg mol⁻¹) polymers. Block polymer interaction parameters were estimated from order-to-disorder transition data using (χN)ODT = 17.996 for ABA triblocks, N calculated from molar mass with a reference volume of 118 ų, and the Hansen solubility parameter of PLA (19.8 J¹/² cm⁻³/²) to calculate midblock solubility parameters.
Limitations
- The paper states that the reference standard-state concentration was defined as 1.0 M for convenience, which can lead to inaccuracies when comparing monomers with different bulk concentrations.
- Bulk concentration decreases as side-chain length increases, so kinetic comparisons across n-alkyl lengths may be confounded; the authors expect a similar trend in solution based on prior work but did not test it here.
- Solubility parameter estimates for longer side chains are uncertain: prior work with styrenic block polymers suggests the solubility parameter may plateau for n > 10 side chains, and the solubility parameters here were estimated for only two midblocks, poly(β1) and poly(δ5).
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
4 Valid · 5 Not valid · 21 Not checked · 56 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“It is gratifying to note that the constitutional isomers poly( β 1 ) and poly( ε -caprolactone) are characterized by the same solubility parameter (18.4 J 1/2 cm -3/2 ).”
What the sources say
- Could not verifycites [64] Schneiderman, 2015, Poly(lactide)-block-poly(ε-caprolactone-co-ε-decalactone)-block-poly(lactide) copolymer elastomers, Polym. Chem. sourceExperimental — accuracy not yet measured
The Results and Discussion section discusses solubility-parameter estimates for interactions between poly(lactide) and other polyesters, but does not identify poly(β1) or give a value of 18.4 J¹ᐟ² cm⁻³ᐟ². Searches for poly(β1), constitutional isomers, and 18.4 found no passage establishing the claimed relationship with poly(ε-caprolactone). No page number is available in our copy. (LLM, conf=0.73)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“Inspired by the incredible versatility of styrenic ABA triblock polymers, we and others have investigated degradable analogues composed of poly(lactide) (PLA) as the hard ' A ' blocks and an amorphous aliphatic polyester homopolymer 7 -17 or statistical copolymer 18,19 as the soft ' B ' block.”
What the sources say
- Not checked — no full text of the sourcecites [7] Tsui, 2013, Biodegradable Polyesters from Renewable Resources, Annu. Rev. Chem. Biomol. Eng. source
- Supportedcites [18] Schneiderman, 2015, Poly(lactide)-block-poly(ε-caprolactone-co-ε-decalactone)-block-poly(lactide) copolymer elastomers, Polym. Chem. source
The Introduction describes PLA-ended triblocks with amorphous polyester midblocks and states that this study prepares PLA-ended elastomers using a statistical poly(ε-caprolactone-co-ε-decalactone) midblock. The Conclusions confirm synthesis of those PLA block–statistical copolymers. The cited paper therefore supports the statistical-copolymer example in the citing sentence. (LLM, conf=0.91)
- Not checked — no full text of the sourcecites [19] Andronova, 2006, Resilient Bioresorbable Copolymers Based on Trimethylene Carbonate L-Lactide, and 1,5-Dioxepan-2-one, Biomacromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The e ff ect of alkyl substituent size and location on bulk polymerization rate has not been systematically studied.”
What the sources say
- Not checked — no full text of the sourcecites [33] Martello, 2012, Bulk Ring-Opening Transesterification Polymerization of the Renewable δ-Decalactone Using an Organocatalyst, ACS Macro Lett. source
- Could not verifycites [42] Zhao, 2015, Polymerization of 5-alkyl-δ-Lactones catalyzed by diphenyl phosphate and their sequential organocatalytic polymerization with monosubstituted epoxides, Polym. Chem. sourceExperimental — accuracy not yet measured
The Results and discussion compare polymerization rates for three 5-alkyl δ-lactones, all substituted at the same position, but do not state that substituent size and location have lacked systematic study. Table 1 lists bulk polymerization for epoxides, not a comparison of bulk polymerization rates across alkyl-substituted lactones. Searches for the claimed research gap and for bulk polymerization found no passage establishing it. (LLM, conf=0.73)
- Not checked — no full text of the sourcecites [43] Makiguchi, 2014, Diphenyl Phosphate/4– Dimethylaminopyridine as an Efficient Binary Organocatalyst System for Controlled/Living Ring–Opening Polymerization of L–Lactide Leading to Diblock and End–Functionalized Poly(L–Lactide)s, J. Polym. Sci., Part A: Polym. Chem. source
- Not checked — no full text of the sourcecites [44] Miranda, 2013, Understanding the Mechanism of Polymerization of ε-Caprolactone Catalyzed by Aluminum Salen Complexes, Inorg. Chem. source
- Could not verifycites [45] Marlier, 2016, ACS Catal. sourceExperimental — accuracy not yet measured
The Introduction discusses how ligand linker length and substituents affect ring-opening polymerization rates, but does not say whether alkyl substituent size and location have been systematically studied for bulk polymerization. The Results describe kinetics measured in toluene-d8, not in bulk. Searches for bulk or solvent-free polymerization and alkyl substituent size or location found no passage addressing the claimed research gap; page numbers were unavailable in our copy. (LLM, conf=0.75)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Although thermodynamic parameters have been reported for the polymerization of several substituted δ -valerolactone monomers, the e ff ect of alkyl substituent size and location on the standard state enthalpy ( Δ H p ° ) and entropy ( Δ S p ° ) of polymerization has not been experimentally studied in a systematic manner.”
What the sources say
- Could not verifycites [14] Xiong, 2014, The production of mechanically tunable block polymers from sugar, Proc. Natl. Acad. Sci. U. S. A. sourceExperimental — accuracy not yet measured
The “Polymerization of βMδVL” section reports enthalpy and entropy values for one alkyl-substituted δ-valerolactone and refers to previous work on related monomers. It does not address whether substituent size and location had been studied systematically; searches for those terms found no such statement in our copy. No page number is available for this passage. (LLM, conf=0.72)
- Not checked — no full text of the sourcecites [30] Save, 2002, Controlled Ring–Opening Polymerization of Lactones and Lactides Initiated by Lanthanum Isopropoxide, 1 General Aspects and Kinetics, Macromol. Chem. Phys. doi:10.1002/1521-3935(20020401)203:5/6
- Not checked — no full text of the sourcecites [33] Martello, 2012, Bulk Ring-Opening Transesterification Polymerization of the Renewable δ-Decalactone Using an Organocatalyst, ACS Macro Lett. source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Since in this work the hard block is poly(lactide), at a fi xed molar mass, decreasing the polarity of the midblock segment e ff ectively increases the segregation strength of the two blocks. 11,13,64,85 -89”
What the sources say
- Not checked — no full text of the sourcecites [11] Martello, 2011, Polylactide-Poly(6-methyl-ε-caprolactone)-Polylactide Thermoplastic Elastomers, Macromolecules source
- Not checked — no full text of the sourcecites [13] Martello, 2014, Synthesis and Melt Processing of Sustainable Poly(ε-decalactone)-block-Poly(lactide) Multiblock Thermoplastic Elastomers, ACS Sustainable Chem. Eng. source
- Partly supportedcites [64] Schneiderman, 2015, Poly(lactide)-block-poly(ε-caprolactone-co-ε-decalactone)-block-poly(lactide) copolymer elastomers, Polym. Chem. sourceExperimental — accuracy not yet measured
The Results and Discussion section defines segregation strength as χN and says PLA’s interaction parameter is expected to increase as the other polyester becomes more aliphatic. Table 3 is consistent with that trend at 140 °C. But the same section predicts the opposite ordering for LCL and LCDL at temperatures of at least 180 °C, so the unqualified claim is too broad. (LLM, conf=0.84)
- Not checked — no full text of the sourcecites [85] Lee, 2013, Sustainable Poly(lactide-b-butadiene) Multiblock Copolymers with Enhanced Mechanical Properties, Macromolecules source
- Not checked — no full text of the sourcecites [86] Wolf, 2003, Ordered Nanoporous Polycyclohexylethylene, Langmuir source
- Not checked — no full text of the sourcecites [87] Schmidt, 2002, Morphological Behavior of Model Poly(ethylene-alt-propylene)-b-Polylactide Block Polymers, J. Polym. Sci., Part B: Polym. Phys. source
- Not checked — no full text of the sourcecites [88] Lee, 2013, Fluctuations, order, and disorder in short diblock copolymers, AIChE J. source
- Not checked — no full text of the sourcecites [89] Zalusky, 2002, Ordered Nanoporous Polymers from Polystyrene-Polylactide Block Copolymers, J. Am. Chem. Soc. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
54 more claims
Create a free account to see all 86 claims and every source verdict.
- It may state two separate claims as one. 22
- Probably not a substantial claim. 6
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In general, substituted lactones have relatively low polymerizability compared to the unsubstituted ones and are thus potential candidates for thermal recycling.”
From Catalysis as an Enabling Science for Sustainable Polymers (2018) · cites this paper as [274]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ ■ DISCUSSION
“Figure 6. Activated monomer mechanism for the acid-catalyzed polymerization of diphenyl phosphate.”
§ ■ RESULTS
“The racemic monomers shown in Figure 1 were each polymerized in the bulk at room temperature ( ∼ 27 ° C) with the acid catalyst diphenyl phosphate (DPP).”
Citations
Cites
Applications and societal benefits of plastics
Andrady, A. L., & Neal, M. A. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0304 · Cited by 2,464
Fetters, L. J., Lohse, D. J., Richter, D., Witten, T. A., & Zirkel, A. (1994) · Macromolecules · doi:10.1021/ma00095a001 · Cited by 1,999
Synthesis of polycaprolactone: A review
Labet, M., & Thielemans, W. (2009) · Chemical Society Reviews · doi:10.1039/b820162p · Cited by 1,673
Organocatalytic Ring-Opening Polymerization
Kamber, N. E., Jeong, W., Waymouth, R. M., Pratt, R. C., Lohmeijer, B. G. G., & Hedrick, J. L. (2007) · Chemical Reviews · doi:10.1021/cr068415b · Cited by 1,489
Thompson, R. C., Swan, S. H., Moore, C. J., & vom Saal, F. S. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2009.0054 · Cited by 1,294
Organocatalysis: Opportunities and Challenges for Polymer Synthesis
Kiesewetter, M. K., Shin, E. J., Hedrick, J. L., & Waymouth, R. M. (2010) · Macromolecules · doi:10.1021/ma9025948 · Cited by 907
Pitt, G. G., Gratzl, M. M., Kimmel, G. L., Surles, J., & Sohindler, A. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90060-0 · Cited by 857
Guanidine and Amidine Organocatalysts for Ring-Opening Polymerization of Cyclic Esters
Lohmeijer, B. G. G., Pratt, R. C., Leibfarth, F., Logan, J. W., Long, D. A., Dove, A. P., Nederberg, F., Choi, J., Wade, C., Waymouth, R. M., et al. (2006) · Macromolecules · doi:10.1021/ma0619381 · Cited by 816
Hong, M., & Chen, E. Y.-X. (2016) · Nature Chemistry · doi:10.1038/nchem.2391 · Cited by 677
Aliphatic Polyester Block Polymers: Renewable, Degradable, and Sustainable
Hillmyer, M. A., & Tolman, W. B. (2014) · Accounts of Chemical Research · doi:10.1021/ar500121d · Cited by 635
Self-citation
Research works printed but not linked: 6
- Romer, 2014, Plastic Bag Reduction Ordinances: New York City’s Proposed Charge on All Carryout Bags as a Model for U.S. Cities, Tulane Environ. Law J., 27, 237
- Romer, 2007, The Evolution of SF’s Plastic Bag Ban, Golden Gate Univ. Environ. Law J., 439, 439
- Lebedev, 1982, Thermodynamics of the Polymerization of Lactones, Dokl. Phys. Chem., 264, 334
- Lebedev, 1995, Thermodynamics of p-dioxanone, of its polymerization and of poly(p-dioxanone) at 0–450 K, Vysokomol. Soedin., Ser. A Ser. B, 37, 187
- Schneiderman, 2015, Poly(lactide)-block-poly(ε-caprolactone-co-ε-decalactone)-block-poly(lactide) copolymer elastomers, Polym. Chem., 6, 3641, 10.1039/C5PY00202H · DOI · Paper page
- Grulke, 1999, Polymer Handbook
Cited by
Items 201–291 of 291
McGuire, T. M., Ning, D., & Williams, C. K. (2025) · ACS Catalysis · doi:10.1021/acscatal.5c01758 · Cited by 6
Wang, M., Ding, Z., Xiao, J., Liao, Y., Ma, Z., Li, Y., & Wang, B. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202509468 · Cited by 11
Zhang, H., Cao, J., Jiang, L., Du, Y., Huang, Y., & Dan, Y. (2026) · Polymer · doi:10.1016/j.polymer.2026.129779 · Cited by 6
Catalyst Control of Polyester Branching in the Hydroesterificative Polymerization of 10-Undecen-1-ol
Sachs, J. D., Anderson, R. J., & Tonks, I. A. (2023) · ACS Catalysis · doi:10.1021/acscatal.3c03464 · Cited by 7
Ring-opening polymerization of a tri-substituted six-membered lactone derived from CO 2 /butadiene
Xu, J., Niu, Y., & Lin, B. (2024) · Polymer Chemistry · doi:10.1039/d4py01213e · Cited by 7
Fluoride‐Triggered Self‐Degradation of Poly(2,4‐disubstitued 4‐hydroxybutyric acid) Derivatives
Kan, X., Zhang, L., Li, Z., Du, F., & Li, Z. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202100169 · Cited by 6
Ring‐opening polymerization of 1,4‐oxathian‐2‐one and its copolymerization with δ‐valerolactone
Wang, Q., Cao, M., Kan, X., Lv, A., Du, F., & Li, Z. (2022) · Journal of Polymer Science · doi:10.1002/pol.20220054 · Cited by 6
Pedretti, B. J., Zhu, C., Watanabe, H., Aoshima, S., & Lynd, N. A. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00473 · Cited by 7
Mazumdar, S., Narisepalli, S., Singh, A. K., Chitkara, D., & Mittal, A. (2023) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2023.105173 · Cited by 7
McMichael, P., Schultze, X., Cramail, H., & Peruch, F. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112859 · Cited by 6
Hu, G., Wang, Y., Wang, Y., Zhu, X., Yuan, D., & Yao, Y. (2023) · Chemical Communications · doi:10.1039/d3cc01766d · Cited by 8
De Novo Synthesis and Assembly of Flexible and Biocompatible Physical Sensing Platforms
Ye, C., Wang, J., Xu, Y., Zheng, K., Wang, X., Ling, S., & Kaplan, D. L. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800141 · Cited by 6
Ionic and Coordination Ring‐Opening Polymerization
Penczek, S., Biela, T., Cypryk, M., Duda, A., Łapienis, G., Kubisa, P., Pretula, J., Słomkowski, S., & Szymański, R. (2022) · Wiley eBooks · doi:10.1002/9783527815562.mme0026 · Cited by 6
Yu, X., Li, B., Wang, J., Shang, Z., Tian, D., Wang, G., & Hu, A. (2022) · Polymer Chemistry · doi:10.1039/d2py00526c · Cited by 5
Pascouau, C., Méreau, R., Grau, É., Wirotius, A., Carlotti, S., Cramail, H., & Peruch, F. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c01303 · Cited by 6
Current Advances and Challenges in Chemical Recycling of Polymeric MaterialsPreprint
Kim, H. J. (2023) · Preprints.org · doi:10.20944/preprints202310.0427.v1 · Cited by 4
Wang, M., Ding, Z., Xiao, J., Liao, Y., Ma, Z., Li, Y., & Wang, B. (2025) · Angewandte Chemie · doi:10.1002/ange.202509468 · Cited by 5
Gravina, G., Romano, E., Liporace, A., D’Alterio, M. C., Talarico, G., & Pellecchia, C. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c07947 · Cited by 6
Bhatt, M. M., Deacy, A. C., & Tonks, I. A. (2025) · Polymer Chemistry · doi:10.1039/d5py00950b · Cited by 6
Pan, Y.-M., Li, X., Shang, W., & Xu, T. (2025) · Polymer Chemistry · doi:10.1039/d5py00022j · Cited by 4
Zhu, X., Yang, G., Xie, R. J., & Wu, G. (2021) · Angewandte Chemie · doi:10.1002/ange.202115189 · Cited by 4
Shi, C., Reilly, L. T., & Chen, E. Y. ‐. (2023) · Angewandte Chemie · doi:10.1002/ange.202301850 · Cited by 5
Lee, W., Yu, Y. J., Kang, H., Kwon, S. H., Lee, S. G., Chung, J. W., & Kwak, S. (2023) · Journal of Materials Chemistry A · doi:10.1039/d3ta05808e · Cited by 4
Catalytic Hydrogenation of Alkylphenols for Renewable Caprolactone
Soeherman, J. K., Kim, J., Onn, T. M., Reineke, T. M., & Dauenhauer, P. J. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c04610 · Cited by 4
Shen, D., Shi, B., Zhou, P., Li, D., Zhu, W., & Wang, G. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c01334 · Cited by 4
Ring-chain equilibria of dynamic macrocycles with a bis(hindered amino)disulfide linker
Takashima, R., Aoki, D., Kuwata, S., & Otsuka, H. (2023) · Polymer Chemistry · doi:10.1039/d3py00808h · Cited by 4
Leng, X., Jin, C., Zhou, C. Z., Wang, Y., Wei, Z., & Li, Y. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01694-y · Cited by 4
Miao, X., Han, R., Tian, J., Ma, Y., Müller, A. J., & Li, Z. (2024) · Angewandte Chemie · doi:10.1002/ange.202417627 · Cited by 3
Toughness Improvement of Carbene Bioadhesives via In Situ Polyester Extension
Ang, E. W. J., Hakim, M., Ali, N., & Steele, T. W. J. (2025) · Journal of Polymer Science · doi:10.1002/pol.20250518 · Cited by 3
Ha, Y., Han, J., Hur, S. J., Choi, U. H., & Kim, H. J. (2026) · Macromolecular Research · doi:10.1007/s13233-026-00513-y · Cited by 3
Ultra‐Tough Elastomers from Stereochemistry‐Directed Hydrogen Bonding in Isosorbide‐Based Polymers
Petersen, S. R., Prydderch, H., Worch, J. C., Stubbs, C. J., Wang, Z., Yu, J., Arno, M. C., Dobrynin, A. V., Becker, M. L., & Dove, A. P. (2022) · Angewandte Chemie · doi:10.1002/ange.202115904 · Cited by 4
Jiang, H., Li, Z., Dai, Y.-N., Ling, Y., Mei, S., Wang, H., & Mou, Z. (2023) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.3c03298 · Cited by 2
Liu, X., Zhu, L., Jie, S., & Li, B. (2024) · Chinese Journal of Polymer Science · doi:10.1007/s10118-024-3127-3 · Cited by 5
Yang, Z., Ouyang, X., Chen, S., Wu, G., & Wang, Y.-Z. (2025) · Macromolecules · doi:10.1021/acs.macromol.4c02498 · Cited by 4
β-Pinene-Based Polyester from Renewable Feedstock with Elastomeric Behavior
Hörl, S., Kränzlein, M., & Rieger, B. (2025) · Macromolecules · doi:10.1021/acs.macromol.4c02663 · Cited by 3
Wu, X., Yang, C., Xi, J., Shi, C., Du, F., & Li, Z. (2024) · Angewandte Chemie · doi:10.1002/ange.202404179 · Cited by 2
Anderson, R. J., Akiyama, T., & Tonks, I. A. (2025) · Faraday Discussions · doi:10.1039/d5fd00034c · Cited by 2
Copolymerizations of a CO₂/Butadiene Derived Six‐Membered Lactone with ε‐Caprolactone
Niu, Y., Xu, J., & Lin, B. (2025) · ChemistrySelect · doi:10.1002/slct.202501162 · Cited by 2
Reese, R. M. R., Ganose, A. M., & Romain, C. (2025) · Faraday Discussions · doi:10.1039/d5fd00098j · Cited by 3
Poly(vinyl ether) Star Copolymers as Bioderived Thermoplastic Elastomers
Shankel, S. L., Krajovic, D. M., Spring, S. W., Zhang, J. Y., Hillmyer, M. A., & Fors, B. P. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c01668 · Cited by 2
Self-citationZhao, D., Li, T., Jiang, L., Li, Z., & Li, Z. (2026) · Biomacromolecules · doi:10.1021/acs.biomac.5c02468 · Cited by 2
Deacy, A. C., Webber, C., & Tonks, I. A. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.6c07186 · Cited by 2
Eckstrom, F. D., Kozarekar, S. S., Chokkapu, E. R., Gace, M. T., Shaw, A., Broadbelt, L. J., & Chen, E. Y. ‐. (2026) · Chem Circularity · doi:10.1016/j.checir.2026.100078 · Cited by 3
Stouten, J., Delgove, M. A. F., Vos, N. D., Matthysen, K., Deroover, G., & Bernaerts, K. V. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112523 · Cited by 2
Ring‐opening polymerization of l ‐lactide in the presence of α‐hydroxy‐γ‐butyrolactone
Pascouau, C., Carlotti, S., Cramail, H., & Peruch, F. (2024) · Polymers for Advanced Technologies · doi:10.1002/pat.6324 · Cited by 2
Jiang, J., Xue, L., Wang, J., Qiang, H., Li, J., Du, J., & Zhu, Y. (2024) · Polymer Chemistry · doi:10.1039/d4py00404c · Cited by 4
Facile, Efficient, and Safe Copper‐Free Synthesis of Glycidyl Triazolyl Polymers
Ikeda, T., & Hosoda, N. (2025) · Journal of Polymer Science · doi:10.1002/pol.20250233 · Cited by 2
Tunable and Recyclable Polyesters from CO2 and ButadienePreprint
Rapagnani, R. M., Dunscomb, R. J., Fresh, A. A., et al. (2021) · doi:10.33774/chemrxiv-2021-4b5js · Cited by 2
Homo- and Hetero-Recyclable Polyesters with High Refractive Index from CO2, 1,3-Butadiene and ThiolsPreprint
Zhang, Z., Shen, T., Chen, K., et al. (2023) · ChemRxiv · doi:10.26434/chemrxiv-2023-pq6zg · Cited by 2
Homo- and Hetero-Recyclable Polyesters with High Refractive Index from CO2, 1,3-Butadiene and ThiolsPreprint
Zhang, Z., Shen, T., Chen, K., et al. (2023) · ChemRxiv · doi:10.26434/chemrxiv-2023-pq6zg-v2 · Cited by 2
Huang, Z., Yi, X., Pan, R., Huang, H., Liu, C., Chen, L., Wang, F., & Wang, S. (2025) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5c00790 · Cited by 1
Wang, L., Niu, H., Liu, D., Zhang, L., Yu, X., Chang, H., Shen, Y., & Li, Z. (2026) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c12503 · Cited by 1
Precise Structural Design for Chemically Recyclable Polymers
Xu, X., Deng, J., Zhang, Z., & Yan, X. (2026) · Precision Chemistry · doi:10.1021/prechem.5c00377 · Cited by 3
Predicting ceiling temperature for recyclable polymer design using machine learning
Kozarekar, S. S., Lee, H., Chen, E. Y. ‐., & Broadbelt, L. J. (2026) · Cell Reports Sustainability · doi:10.1016/j.crsus.2026.100652 · Cited by 1
Li, Z., Li, T., Zhao, D., & Li, Z. (2026) · Science China Chemistry · doi:10.1007/s11426-025-3173-1 · Cited by 2
Li, J., Wang, M. Y., Dai, S., Ding, Z., Xia, H., Wang, D., & Wang, B. (2026) · ACS Catalysis · doi:10.1021/acscatal.6c00484 · Cited by 3
Thorogood, R., McGuire, T. M., & Williams, C. K. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.6c06048 · Cited by 2
Yang, C., Wu, X., Yu, L., Bi, C.-A., Du, F., & Li, Z. (2024) · ACS Macro Letters · doi:10.1021/acsmacrolett.4c00398 · Cited by 1
Zhang, J., Liu, Y., & Shen, Y. (2024) · Journal of Polymer Science · doi:10.1002/pol.20240906 · Cited by 2
DESIGN AND SYNTHESIS OF DIFFERENT TYPES OF POLY(LACTIC ACID)/POLYLACTIDE COPOLYMERS
Albertsson, A., Varma, I. K., Lochab, B., Finne‐Wistrand, A., Sahu, S., & Kumar, K. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch4 · Cited by 2
Bidoky, F. Z. (2019) · University of Minnesota Digital Conservancy (University of Minnesota)
Block Copolymers for Sustainable Thermoplastic Elastomers and Nanoparticle Fabrication
Nasiri, M. (2017) · University of Minnesota Digital Conservancy (University of Minnesota)
DEVELOPMENT OF ORGANOCATALYSTS FOR RING-OPENING POLYMERIZATION (ROP) OF LACTONES
Hewawasam, R. S. (2020) · Digital Commons - URI (University of Rhode Island) · doi:10.23860/hewawasam-rukshika-2020
Reactive and Functional Polyesters and Polyurethanes
Akbari, M., & Najjar, R. (2020) · Springer eBooks · doi:10.1007/978-3-030-43403-8_8
Kalana, U. L. D. I. (2021) · Digital Commons - URI (University of Rhode Island) · doi:10.23860/inush-kalana-urala-liyanage-don-2021
An Efficient Two-Step Procedure For Compressed Sensing 3D Mimo Radar
Merched, R., & Pinto, R. (2015) · INFM-OAR (INFN Catania) · doi:10.5281/zenodo.35812
Antibacterial piperazine‐derived quaternized copolyesters with controlled degradability
Goel, S., Kaur, M., Singh, N., & Jacob, J. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.53677
Dossi, E., Mutele‐Nkuna, K. L., Wilkinson, P. J., Kister, G., Patrick, H., Khalili, M. H., & Hawi, S. (2024) · Journal of Polymer Science · doi:10.1002/pol.20240152
Organocatalysts for the Preparation of Degradable and Closed‐Loop Recyclable Polyesters
Shen, Y., & Li, Z. (2025) · Wiley eBooks · doi:10.1002/9783527843077.ch4 · Cited by 1
Ruiz, A. C., Guðjónsson, H. G., Runarsdottir, B., & Suman, S. G. (2025) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.202500197
Pretula, J., Dudek, M. K., Kałużyński, K., Kaźmierski, S., Cypryk, M., & Penczek, S. (2025) · Macromolecules · doi:10.1021/acs.macromol.5c02033
Gravina, G., Tagoe, J. N. A., Girolamo, R. D., Gentile, M., Maio, L. D., & Pellecchia, C. (2026) · ACS Polymers Au · doi:10.1021/acspolymersau.5c00172 · Cited by 2
Xu, J., Li, Z., Wang, Y., Chen, S., Wang, H., & Wu, J. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c02949 · Cited by 1
β-Methyl-δ-valerolactone as a Monomer for UV-Curable and Chemically Recyclable Elastomers
Block, A., Kirshner, A., Vasconcelos, A. P. K., Nelson, A., Bates, F. S., & Hillmyer, M. A. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.5c04080
Self-citationKelly, P., Block, A., Hoehn, B. D., Saha, P., Ellison, C. J., & Hillmyer, M. A. (2026) · RSC Applied Polymers · doi:10.1039/d5lp00389j
Self-citationLiu, Y., & Shen, Y. (2026) · Precision Chemistry · doi:10.1021/prechem.5c00441 · Cited by 1
Function Meets Circularity: Metal–Ionomer Cross-Links Toughen and Recycle CO 2 -Derived Polymers
Poon, K. C., McGuire, T. M., Gao, C., Sulley, G. S., & Williams, C. K. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00188
“54,55 The intentional incorporation of depolymerization catalysts into polymers would simplify chemical recycling, requiring only heating to trigger depolymerization, and represents an unexplored strategy for creating materials that simultaneously exhibit enhanced properties and controlled,…”
Elaboration de nouveaux élastomères thermoplastiques biosourcés à base d’huiles végétales
Costa, C. (2020) · theses.fr (ABES) · doi:10.70675/f65e6d9dzfb2ez41cbzaebdzebc6e1979535
Kohsaka, Y., Takeuchi, M., Ikegaya, T., Murase, H., & Nobukawa, S. (2026) · Polymer · doi:10.1016/j.polymer.2026.130139
Recent advancements in the synthesis of degradable polymers and their pathways
Jujjuri, L., Elumalai, S., Sanakal, S. I., & Maji, S. (2026) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2026.2663343
“[31] Polyesters find widespread use across numerous applications, [32] especially in the textile industry, owing to their durability and cost-effectiveness.”
Huang, B., Shen, T., He, Z., Yang, X., Wang, Z., Ji, L., Chen, Y., Luo, J., Ling, J., & Chen, Y. (2026) · European Polymer Journal · doi:10.1016/j.eurpolymj.2026.114911
Qian, Y.-Y., Sun, X.-B., Liu, Y.-L., & Li, Z.-B. (2026) · Chinese Journal of Polymer Science · doi:10.1007/s10118-026-3725-3 · Cited by 1
Breaking the Ring and Closing the Loop: New Bicyclic Monomers for Sustainable Polymers
Wang, M., Lee, S., Lee, H., Namkoong, H., & Kim, B. (2026) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2026.2708329
Rinaldi, G., Ferrentino, N., Mucciolo, M., Sessini, V., Paolucci, M., Coccia, E., & Pappalardo, D. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.71325
Harsevoort, E., Akkerman, H.-J., Lutz, M., Thevenon, A., & Bruijnincx, P. C. A. (2026) · Angewandte Chemie · doi:10.1002/ange.6168208
Harsevoort, E., Akkerman, H.-J., Lutz, M., Thevenon, A., & Bruijnincx, P. C. A. (2026) · Angewandte Chemie International Edition · doi:10.1002/anie.6168208
Metadata
- Authors
- Schneiderman, D. K., & Hillmyer, M. A.
- Affiliations
- University of Minnesota (US)
- Corresponding author
- Hillmyer, Marc A.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-09
- Volume
- 49
- Issue
- 7
- Pages
- 2419-2428
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2294244603
- Semantic Scholar
- 8bfefebfd4d868ef41de44dc0bb7f16c5f98aea9
- Cited by
- 290
- References
- 82
- Citations by year
- 2026: 27 · 2025: 28 · 2024: 34 · 2023: 37 · 2022: 34 · 2021: 27 · 2020: 30 · 2019: 20 · 2018: 19 · 2017: 21 · 2016: 13
- FWCI
- 9.94
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Macromolecules (publishedVersion, other-oa)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- Basic Energy Sciences (DEAC02-06CH11357)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- δ-valerolactone, N-alkyl substituents, polymerization kinetics, polymerization thermodynamics, structure-property relationships, substituent position, solubility parameter, biodegradable polymers, sustainable materials, self-assembled materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.