Aliphatic Polyester Block Polymer Design
Open accessThe DOI matches its Crossref record; 83 of the 84 references it cites were found in a registry or an index; 9 of the 64 sources its claims cite were checked for support.
Abstract
Abstract Aliphatic polyester block polymers constitute a highly useful and amazingly versatile class of self-assembled materials. Analogous to styrenic block polymers in both design and function, the property profiles of these degradable materials can be precisely tailored by altering the chemical structure of the components. Driven by this ideal, we have examined the impact of n-alkyl substituents on the polymerization thermodynamics and kinetics of substituted δ-valerolactone monomers and developed guiding design principles based on critical structure–property relationships in the resulting aliphatic polyesters. Under bulk room temperature conditions the polymerization rate depends strongly on substituent position and exhibits a more modest dependence on alkyl length (from −CH3 to −(CH2)8CH3). The enthalpy and entropy of polymerization are significantly influenced by substituent position, but both are largely insensitive to n-alkyl length. However, the physical properties of the resulting aliphatic polyesters depend much more on substituent length than on substituent position. Notably, we demonstrate that polymer entanglement molar mass and solubility parameter can be systematically tuned by changing the substituent length. We discuss how these key structure property relationships can be used to inform the design of advanced sustainable materials for future technologies important in the arena of environmentally friendly materials.
Overview
CoChat Summary
TL;DR
This paper systematically examines n-alkyl substituted δ-valerolactones to establish design rules for aliphatic polyester block polymers. It shows polymerization thermodynamics and kinetics are governed mainly by substituent position, while polymer physical properties such as entanglement molar mass and solubility parameter can be tuned by substituent length without significantly changing the glass transition temperature.
Key findings
- In bulk DPP-catalyzed ROTEP at ~27 °C, polymerization rate depends strongly on substituent position and more modestly on n-alkyl length; δ1 is the slowest methyl-substituted monomer, with an observed rate constant about an order of magnitude smaller than unsubstituted δ-valerolactone, and initiation is at least 10× faster than propagation. The bulk polymerization is pseudo-zero-order in monomer.
- Substituent position significantly affects ΔHp° and ΔSp°, but n-alkyl length has little effect. Room-temperature equilibrium conversions are 98% for α1 and γ1, 91% for β1, and 89% for δ1; the δ-substituted series reaches 89% ± 2% regardless of substituent length. δ1 is the most exothermic and most entropically unfavored among methyl-substituted lactones, and δ7 has the same ΔSp° and ΔHp° as δ1 within error. Substituted monomers are 2–3× more entropically disfavored than δ-valerolactone.
- Entanglement molar mass increases with substituent length at fixed position: Pα1 = 7.7, Pβ1 = 4.3, Pγ1 = 2.2, Pδ1 = 3.4 kg mol⁻¹; Pδ5 = 13.5 kg mol⁻¹, about 4× larger than Pδ1. Solubility parameters are 18.4 J¹/² cm⁻³/² for poly(β1) and 16.8 J¹/² cm⁻³/² for poly(δ5), compared with 19.8 J¹/² cm⁻³/² for PLA. Pδ0 has Tg = −60 °C and Tm = 55 °C; methyl substitution raises Tg to −52 °C and disrupts crystallinity, with no significant Tg change as the n-alkyl chain is lengthened.
- DPP provides controlled polymerization with Đ ≤ 1.20. The authors propose that Pδ1 and Pβ1 are appealing soft blocks for tough plastics and elastomers due to low entanglement molar mass, while higher-entanglement polymers such as Pδ5 are attractive for pressure-sensitive adhesives.
Methods
- Twelve racemic n-alkyl δ-valerolactone monomers were polymerized in bulk at ~27 °C using diphenyl phosphate (DPP) as catalyst and benzyl alcohol (BnOH) as initiator; reactions were quenched with excess triethylamine, and initiation and polymerization were monitored independently by ¹H NMR.
- Thermodynamic parameters ΔHp° and ΔSp° were estimated from the temperature dependence of equilibrium monomer concentration via Van’t Hoff analysis; kinetics were assessed from conversion versus time and t₁/₂ values.
- Entanglement molar mass was estimated from plateau modulus of high molar mass (~100 kg mol⁻¹) polymers. Block polymer interaction parameters were estimated from order-to-disorder transition data using (χN)ODT = 17.996 for ABA triblocks, N calculated from molar mass with a reference volume of 118 ų, and the Hansen solubility parameter of PLA (19.8 J¹/² cm⁻³/²) to calculate midblock solubility parameters.
Limitations
- The paper states that the reference standard-state concentration was defined as 1.0 M for convenience, which can lead to inaccuracies when comparing monomers with different bulk concentrations.
- Bulk concentration decreases as side-chain length increases, so kinetic comparisons across n-alkyl lengths may be confounded; the authors expect a similar trend in solution based on prior work but did not test it here.
- Solubility parameter estimates for longer side chains are uncertain: prior work with styrenic block polymers suggests the solubility parameter may plateau for n > 10 side chains, and the solubility parameters here were estimated for only two midblocks, poly(β1) and poly(δ5).
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
4 Valid · 5 Not valid · 21 Not checked · 56 Own results and interpretations
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“It is gratifying to note that the constitutional isomers poly( β 1 ) and poly( ε -caprolactone) are characterized by the same solubility parameter (18.4 J 1/2 cm -3/2 ).”
What the sources say
- Could not verifycites [64] Schneiderman, 2015, Poly(lactide)-block-poly(ε-caprolactone-co-ε-decalactone)-block-poly(lactide) copolymer elastomers, Polym. Chem. sourceExperimental — accuracy not yet measured
The Results and Discussion section discusses solubility-parameter estimates for interactions between poly(lactide) and other polyesters, but does not identify poly(β1) or give a value of 18.4 J¹ᐟ² cm⁻³ᐟ². Searches for poly(β1), constitutional isomers, and 18.4 found no passage establishing the claimed relationship with poly(ε-caprolactone). No page number is available in our copy. (LLM, conf=0.73)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“Inspired by the incredible versatility of styrenic ABA triblock polymers, we and others have investigated degradable analogues composed of poly(lactide) (PLA) as the hard ' A ' blocks and an amorphous aliphatic polyester homopolymer 7 -17 or statistical copolymer 18,19 as the soft ' B ' block.”
What the sources say
- Not checked — no full text of the sourcecites [7] Tsui, 2013, Biodegradable Polyesters from Renewable Resources, Annu. Rev. Chem. Biomol. Eng. source
- Supportedcites [18] Schneiderman, 2015, Poly(lactide)-block-poly(ε-caprolactone-co-ε-decalactone)-block-poly(lactide) copolymer elastomers, Polym. Chem. source
The Introduction describes PLA-ended triblocks with amorphous polyester midblocks and states that this study prepares PLA-ended elastomers using a statistical poly(ε-caprolactone-co-ε-decalactone) midblock. The Conclusions confirm synthesis of those PLA block–statistical copolymers. The cited paper therefore supports the statistical-copolymer example in the citing sentence. (LLM, conf=0.91)
- Not checked — no full text of the sourcecites [19] Andronova, 2006, Resilient Bioresorbable Copolymers Based on Trimethylene Carbonate L-Lactide, and 1,5-Dioxepan-2-one, Biomacromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“The e ff ect of alkyl substituent size and location on bulk polymerization rate has not been systematically studied.”
What the sources say
- Not checked — no full text of the sourcecites [33] Martello, 2012, Bulk Ring-Opening Transesterification Polymerization of the Renewable δ-Decalactone Using an Organocatalyst, ACS Macro Lett. source
- Could not verifycites [42] Zhao, 2015, Polymerization of 5-alkyl-δ-Lactones catalyzed by diphenyl phosphate and their sequential organocatalytic polymerization with monosubstituted epoxides, Polym. Chem. sourceExperimental — accuracy not yet measured
The Results and discussion compare polymerization rates for three 5-alkyl δ-lactones, all substituted at the same position, but do not state that substituent size and location have lacked systematic study. Table 1 lists bulk polymerization for epoxides, not a comparison of bulk polymerization rates across alkyl-substituted lactones. Searches for the claimed research gap and for bulk polymerization found no passage establishing it. (LLM, conf=0.73)
- Not checked — no full text of the sourcecites [43] Makiguchi, 2014, Diphenyl Phosphate/4– Dimethylaminopyridine as an Efficient Binary Organocatalyst System for Controlled/Living Ring–Opening Polymerization of L–Lactide Leading to Diblock and End–Functionalized Poly(L–Lactide)s, J. Polym. Sci., Part A: Polym. Chem. source
- Not checked — no full text of the sourcecites [44] Miranda, 2013, Understanding the Mechanism of Polymerization of ε-Caprolactone Catalyzed by Aluminum Salen Complexes, Inorg. Chem. source
- Could not verifycites [45] Marlier, 2016, ACS Catal. sourceExperimental — accuracy not yet measured
The Introduction discusses how ligand linker length and substituents affect ring-opening polymerization rates, but does not say whether alkyl substituent size and location have been systematically studied for bulk polymerization. The Results describe kinetics measured in toluene-d8, not in bulk. Searches for bulk or solvent-free polymerization and alkyl substituent size or location found no passage addressing the claimed research gap; page numbers were unavailable in our copy. (LLM, conf=0.75)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“Although thermodynamic parameters have been reported for the polymerization of several substituted δ -valerolactone monomers, the e ff ect of alkyl substituent size and location on the standard state enthalpy ( Δ H p ° ) and entropy ( Δ S p ° ) of polymerization has not been experimentally studied in a systematic manner.”
What the sources say
- Could not verifycites [14] Xiong, 2014, The production of mechanically tunable block polymers from sugar, Proc. Natl. Acad. Sci. U. S. A. sourceExperimental — accuracy not yet measured
The “Polymerization of βMδVL” section reports enthalpy and entropy values for one alkyl-substituted δ-valerolactone and refers to previous work on related monomers. It does not address whether substituent size and location had been studied systematically; searches for those terms found no such statement in our copy. No page number is available for this passage. (LLM, conf=0.72)
- Not checked — no full text of the sourcecites [30] Save, 2002, Controlled Ring–Opening Polymerization of Lactones and Lactides Initiated by Lanthanum Isopropoxide, 1 General Aspects and Kinetics, Macromol. Chem. Phys. doi:10.1002/1521-3935(20020401)203:5/6
- Not checked — no full text of the sourcecites [33] Martello, 2012, Bulk Ring-Opening Transesterification Polymerization of the Renewable δ-Decalactone Using an Organocatalyst, ACS Macro Lett. source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Since in this work the hard block is poly(lactide), at a fi xed molar mass, decreasing the polarity of the midblock segment e ff ectively increases the segregation strength of the two blocks. 11,13,64,85 -89”
What the sources say
- Not checked — no full text of the sourcecites [11] Martello, 2011, Polylactide-Poly(6-methyl-ε-caprolactone)-Polylactide Thermoplastic Elastomers, Macromolecules source
- Not checked — no full text of the sourcecites [13] Martello, 2014, Synthesis and Melt Processing of Sustainable Poly(ε-decalactone)-block-Poly(lactide) Multiblock Thermoplastic Elastomers, ACS Sustainable Chem. Eng. source
- Partly supportedcites [64] Schneiderman, 2015, Poly(lactide)-block-poly(ε-caprolactone-co-ε-decalactone)-block-poly(lactide) copolymer elastomers, Polym. Chem. sourceExperimental — accuracy not yet measured
The Results and Discussion section defines segregation strength as χN and says PLA’s interaction parameter is expected to increase as the other polyester becomes more aliphatic. Table 3 is consistent with that trend at 140 °C. But the same section predicts the opposite ordering for LCL and LCDL at temperatures of at least 180 °C, so the unqualified claim is too broad. (LLM, conf=0.84)
- Not checked — no full text of the sourcecites [85] Lee, 2013, Sustainable Poly(lactide-b-butadiene) Multiblock Copolymers with Enhanced Mechanical Properties, Macromolecules source
- Not checked — no full text of the sourcecites [86] Wolf, 2003, Ordered Nanoporous Polycyclohexylethylene, Langmuir source
- Not checked — no full text of the sourcecites [87] Schmidt, 2002, Morphological Behavior of Model Poly(ethylene-alt-propylene)-b-Polylactide Block Polymers, J. Polym. Sci., Part B: Polym. Phys. source
- Not checked — no full text of the sourcecites [88] Lee, 2013, Fluctuations, order, and disorder in short diblock copolymers, AIChE J. source
- Not checked — no full text of the sourcecites [89] Zalusky, 2002, Ordered Nanoporous Polymers from Polystyrene-Polylactide Block Copolymers, J. Am. Chem. Soc. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
54 more claims
Create a free account to see all 86 claims and every source verdict.
- It may state two separate claims as one. 22
- Probably not a substantial claim. 6
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In general, substituted lactones have relatively low polymerizability compared to the unsubstituted ones and are thus potential candidates for thermal recycling.”
From Catalysis as an Enabling Science for Sustainable Polymers (2018) · cites this paper as [274]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ ■ DISCUSSION
“Figure 6. Activated monomer mechanism for the acid-catalyzed polymerization of diphenyl phosphate.”
§ ■ RESULTS
“The racemic monomers shown in Figure 1 were each polymerized in the bulk at room temperature ( ∼ 27 ° C) with the acid catalyst diphenyl phosphate (DPP).”
Citations
Cites
Applications and societal benefits of plastics
Andrady, A. L., & Neal, M. A. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0304 · Cited by 2,464
Fetters, L. J., Lohse, D. J., Richter, D., Witten, T. A., & Zirkel, A. (1994) · Macromolecules · doi:10.1021/ma00095a001 · Cited by 1,999
Synthesis of polycaprolactone: A review
Labet, M., & Thielemans, W. (2009) · Chemical Society Reviews · doi:10.1039/b820162p · Cited by 1,673
Organocatalytic Ring-Opening Polymerization
Kamber, N. E., Jeong, W., Waymouth, R. M., Pratt, R. C., Lohmeijer, B. G. G., & Hedrick, J. L. (2007) · Chemical Reviews · doi:10.1021/cr068415b · Cited by 1,489
Thompson, R. C., Swan, S. H., Moore, C. J., & vom Saal, F. S. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2009.0054 · Cited by 1,294
Organocatalysis: Opportunities and Challenges for Polymer Synthesis
Kiesewetter, M. K., Shin, E. J., Hedrick, J. L., & Waymouth, R. M. (2010) · Macromolecules · doi:10.1021/ma9025948 · Cited by 907
Pitt, G. G., Gratzl, M. M., Kimmel, G. L., Surles, J., & Sohindler, A. (1981) · Biomaterials · doi:10.1016/0142-9612(81)90060-0 · Cited by 857
Guanidine and Amidine Organocatalysts for Ring-Opening Polymerization of Cyclic Esters
Lohmeijer, B. G. G., Pratt, R. C., Leibfarth, F., Logan, J. W., Long, D. A., Dove, A. P., Nederberg, F., Choi, J., Wade, C., Waymouth, R. M., et al. (2006) · Macromolecules · doi:10.1021/ma0619381 · Cited by 816
Hong, M., & Chen, E. Y.-X. (2016) · Nature Chemistry · doi:10.1038/nchem.2391 · Cited by 677
Aliphatic Polyester Block Polymers: Renewable, Degradable, and Sustainable
Hillmyer, M. A., & Tolman, W. B. (2014) · Accounts of Chemical Research · doi:10.1021/ar500121d · Cited by 635
Self-citation
Research works printed but not linked: 6
- Romer, 2014, Plastic Bag Reduction Ordinances: New York City’s Proposed Charge on All Carryout Bags as a Model for U.S. Cities, Tulane Environ. Law J., 27, 237
- Romer, 2007, The Evolution of SF’s Plastic Bag Ban, Golden Gate Univ. Environ. Law J., 439, 439
- Lebedev, 1982, Thermodynamics of the Polymerization of Lactones, Dokl. Phys. Chem., 264, 334
- Lebedev, 1995, Thermodynamics of p-dioxanone, of its polymerization and of poly(p-dioxanone) at 0–450 K, Vysokomol. Soedin., Ser. A Ser. B, 37, 187
- Schneiderman, 2015, Poly(lactide)-block-poly(ε-caprolactone-co-ε-decalactone)-block-poly(lactide) copolymer elastomers, Polym. Chem., 6, 3641, 10.1039/C5PY00202H · DOI · Paper page
- Grulke, 1999, Polymer Handbook
Cited by
Chemical recycling to monomer for an ideal, circular polymer economy
Coates, G. W., & Getzler, Y. D. Y. L. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0190-4 · Cited by 1,644
Catalysis as an Enabling Science for Sustainable Polymers
Zhang, X., Fevre, M., Jones, G. O., & Waymouth, R. M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00329 · Cited by 936
50th Anniversary Perspective: Block Polymers—Pure Potential
Bates, C. M., & Bates, F. S. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b02355 · Cited by 788
Approaches to Sustainable and Continually Recyclable Cross-Linked Polymers
Fortman, D. J., Brutman, J. P., De Hoe, G. X., Snyder, R. L., Dichtel, W. R., & Hillmyer, M. A. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b02355 · Cited by 559
Self-citationRecyclable and (Bio)degradable Polyesters in a Circular Plastics Economy
Shi, C., Quinn, E. C., Diment, W. T., & Chen, E. Y.-X. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00848 · Cited by 402
Wang, W., Lu, W., Goodwin, A., Wang, H., Yin, P., Kang, N.-G., Hong, K., & Mays, J. W. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.04.002 · Cited by 326
A review on the thermomechanical properties and biodegradation behaviour of polyesters
Larrañaga, A., & Lizundia, E. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.109296 · Cited by 257
Deacy, A. C., Gregory, G. L., Sulley, G. S., Chen, T. T. D., & Williams, C. K. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c03250 · Cited by 224
Design principles for intrinsically circular polymers with tunable properties
Shi, C., Reilly, L. T., Phani Kumar, V. S., Coile, M. W., Nicholson, S. R., Broadbelt, L. J., Beckham, G. T., & Chen, E. Y.-X. (2021) · Chem · doi:10.1016/j.chempr.2021.10.004 · Cited by 219
Chemically Recyclable Biobased Polyurethanes
Schneiderman, D. K., Vanderlaan, M. E., Mannion, A. M., Panthani, T. R., Batiste, D. C., Wang, J. Z., Bates, F. S., Macosko, C. W., & Hillmyer, M. A. (2016) · ACS Macro Letters · doi:10.1021/acsmacrolett.6b00193 · Cited by 213
Self-citationZhao, N., Ren, C., Li, H., Li, Y., Liu, S., & Li, Z. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201707122 · Cited by 205
From Lab to Market: Current Strategies for the Production of Biobased Polyols
Sardon, H., Mecerreyes, D., Basterretxea, A., Avérous, L., & Jehanno, C. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c02361 · Cited by 199
Strong, Resilient, and Sustainable Aliphatic Polyester Thermoplastic Elastomers
Watts, A., Kurokawa, N., & Hillmyer, M. A. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00283 · Cited by 188
Self-citationPlajer, A. J., & Williams, C. K. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202104495 · Cited by 188
A circular polyester platform based on simple gem-disubstituted valerolactones
Li, X.-L., Clarke, R. W., Jiang, J.-Y., Xu, T.-Q., & Chen, E. Y.-X. (2023) · Nature Chemistry · doi:10.1038/s41557-022-01077-x · Cited by 175
John, G., Nagarajan, S., Vemula, P. K., Silverman, J. R., & Pillai, C. K. S. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.02.008 · Cited by 162
Shi, C., Li, Z.-C., Caporaso, L., Cavallo, L., Falivene, L., & Chen, E. Y.-X. (2021) · Chem · doi:10.1016/j.chempr.2021.02.003 · Cited by 159
Gregory, G. L., López-Vidal, E. M., & Buchard, A. (2017) · Chemical Communications · doi:10.1039/c6cc09578j · Cited by 147
Shi, C., Clarke, R. W., McGraw, M. L., & Chen, E. Y. ‐. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c12278 · Cited by 149
Li, C., Wang, L., Qin, Y. F., Liu, F., Shen, Y., & Li, Z. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202201407 · Cited by 153
Tunable and recyclable polyesters from CO2 and butadiene
Rapagnani, R. M., Dunscomb, R. J., Fresh, A. A., & Tonks, I. A. (2022) · Nature Chemistry · doi:10.1038/s41557-022-00969-2 · Cited by 139
Design of yield-stress fluids: a rheology-to-structure inverse problem
Nelson, A. Z., & Ewoldt, R. H. (2017) · Soft Matter · doi:10.1039/c7sm00758b · Cited by 122
Silk fibroin-based biomaterials for musculoskeletal tissue engineering
Ma, D., Wang, Y., & Dai, W. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2018.04.062 · Cited by 121
Ultra‐Tough Elastomers from Stereochemistry‐Directed Hydrogen Bonding in Isosorbide‐Based Polymers
Petersen, S. R., Prydderch, H., Worch, J. C., Stubbs, C. J., Wang, Z., Yu, J., Arno, M. C., Dobrynin, A. V., Becker, M. L., & Dove, A. P. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202115904 · Cited by 120
Ring-Opening Polymerization for the Goal of Chemically Recyclable Polymers
Plummer, C. M., Li, L., & Chen, Y. (2023) · Macromolecules · doi:10.1021/acs.macromol.2c01694 · Cited by 119
Ring-Opening Polymerization of Lactones to Prepare Closed-Loop Recyclable Polyesters
Li, Z., Shen, Y., & Li, Z. (2024) · Macromolecules · doi:10.1021/acs.macromol.3c01912 · Cited by 130
Zhou, J., Sathe, D., & Wang, J. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.1c11197 · Cited by 114
Tough and Sustainable Graft Block Copolymer Thermoplastics
Zhang, J., Li, T., Mannion, A. M., Schneiderman, D. K., Hillmyer, M. A., & Bates, F. S. (2016) · ACS Macro Letters · doi:10.1021/acsmacrolett.6b00091 · Cited by 112
Self-citationOlsén, P., Undin, J., Odelius, K., Keul, H., & Albertsson, A. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b01375 · Cited by 100
Li, L.-G., Wang, Q., Zheng, Q.-Y., Du, F., & Li, Z. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c00497 · Cited by 101
Renewable, Degradable, and Chemically Recyclable Cross-Linked Elastomers
Brutman, J. P., De Hoe, G. X., Schneiderman, D. K., Le, T. N., & Hillmyer, M. A. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02931 · Cited by 92
Self-citationSustainable Copolymer Synthesis from Carbon Dioxide and Butadiene
Tang, S., Lin, B., Tonks, I. A., Eagan, J. M., Ni, X., & Nozaki, K. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00847 · Cited by 93
Li, X., Clarke, R. W., An, H., Gowda, R. R., Jiang, J., Xu, T., & Chen, E. Y. ‐. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202303791 · Cited by 93
Carrodeguas, L. P., Chen, T. T. D., Gregory, G. L., Sulley, G. S., & Williams, C. K. (2020) · Green Chemistry · doi:10.1039/d0gc02295k · Cited by 88
New sustainable polymers with on-demand depolymerization property
Sun, Y., An, Z., Gao, Y., Hu, R., Liu, Y., Lu, H., Lu, X., Pang, X., Qin, A., Shen, Y., et al. (2024) · Science China Chemistry · doi:10.1007/s11426-024-2167-9 · Cited by 104
Design of Graft Block Polymer Thermoplastics
Zhang, J., Schneiderman, D. K., Li, T., Hillmyer, M. A., & Bates, F. S. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b02033 · Cited by 87
Self-citationA Carbomethoxylated Polyvalerolactone from Malic Acid: Synthesis and Divergent Chemical Recycling
Fahnhorst, G. W., & Hoye, T. R. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00889 · Cited by 86
Multiblock Polyesters Demonstrating High Elasticity and Shape Memory Effects
Zhu, Y., Radlauer, M. R., Schneiderman, D. K., Shaffer, M. S. P., Hillmyer, M. A., & Williams, C. K. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02690 · Cited by 88
Self-citationLin, L., Han, D., Qin, J., Wang, S., Xiao, M., Sun, L., & Meng, Y. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01860 · Cited by 89
The plastics revolution: how chemists are pushing polymers to new limits
Peplow, M. (2016) · Nature · doi:10.1038/536266a · Cited by 89
Stellmach, K. A., Paul, M. K., Xu, M., Su, Y.-L., Fu, L., Toland, A. R., Huan, T. D., Chen, L., Ramprasad, R., & Gutekunst, W. R. (2022) · ACS Macro Letters · doi:10.1021/acsmacrolett.2c00319 · Cited by 86
Tu, Y., Gong, F.-L., Wu, Y., Cai, Z., & Zhu, J. (2023) · Nature Communications · doi:10.1038/s41467-023-38916-5 · Cited by 92
“In contrast to the PGBL system with low T c values, a commercia-lized plastic poly( ɛ -caprolactone) (PCL) produced by ring-opening polymerization (ROP) of ɛ -caprolactone (CL) was reported to have a T c > 2000 °C for 1 M 26,36,37 .”
Architectural Control of Isosorbide-Based Polyethers via Ring-Opening Polymerization
Saxon, D. J., Nasiri, M., Mandal, M., Maduskar, S., Dauenhauer, P. J., Cramer, C. J., LaPointe, A. M., & Reineke, T. M. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b00083 · Cited by 89
Ring-opening polymerization of γ-lactones and copolymerization with other cyclic monomers
Song, Q., Pascouau, C., Zhao, J., Zhang, G., Peruch, F., & Carlotti, S. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101309 · Cited by 80
Diment, W. T., Gregory, G. L., Kerr, R. W. F., Phanopoulos, A., Buchard, A., & Williams, C. K. (2021) · ACS Catalysis · doi:10.1021/acscatal.1c04020 · Cited by 81
Shi, C., Guo, Y.-T., Wu, Y., Li, Z.-Y., Wang, Y.-Z., Du, F., & Li, Z. (2019) · Macromolecules · doi:10.1021/acs.macromol.8b02498 · Cited by 78
Strategies for the synthesis of block copolymers with biodegradable polyester segments
Diaz, C., & Mehrkhodavandi, P. (2021) · Polymer Chemistry · doi:10.1039/d0py01534b · Cited by 74
Liffland, S., & Hillmyer, M. A. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c01357 · Cited by 76
Self-citationQin, Y. F., Li, C., Yan, T., Shen, Y., & Li, Z. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00439 · Cited by 75
Lee, K. W., Chung, J. W., & Kwak, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01356 · Cited by 74
Design of depolymerizable polymers toward a circular economy
Highmoore, J. F., Kariyawasam, L. S., Trenor, S. R., & Yang, Y. (2024) · Green Chemistry · doi:10.1039/d3gc04215d · Cited by 80
“39 Racemic carbomethoxy substitution at the γ -position surprisingly gave a semi-crystal-line polymer ( T m = − 7 – 95 °C varied by the length of substituents).”
Emerging Trends in the Chemistry of End-to-End Depolymerization
Deng, Z., & Gillies, E. R. (2023) · JACS Au · doi:10.1021/jacsau.3c00345 · Cited by 72
Sustainable glucose-based block copolymers exhibit elastomeric and adhesive behavior
Nasiri, M., & Reineke, T. M. (2016) · Polymer Chemistry · doi:10.1039/c6py00700g · Cited by 75
Myers, D., Witt, T., Cyriac, A., Bown, M., Mecking, S., & Williams, C. K. (2017) · Polymer Chemistry · doi:10.1039/c7py00985b · Cited by 74
Shi, C., Reilly, L. T., & Chen, E. Y. ‐. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202301850 · Cited by 66
Industrially applied and relevant transformations of 1,3-butadiene using homogeneous catalysts
Yang, J., Wang, P., Neumann, H., et al. (2023) · Industrial Chemistry and Materials · doi:10.1039/d3im00009e · Cited by 62
Bandelli, D., Alex, J., Weber, C., & Schubert, U. S. (2020) · Macromolecular Rapid Communications · doi:10.1002/marc.201900560 · Cited by 61
Degradable Polymer Structures from Carbon Dioxide and Butadiene
Espinosa, L. D. G., Williams‐Pavlantos, K., Turney, K. M., Wesdemiotis, C., & Eagan, J. M. (2021) · ACS Macro Letters · doi:10.1021/acsmacrolett.1c00523 · Cited by 57
Nasiri, M., Saxon, D. J., & Reineke, T. M. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02248 · Cited by 58
Ring-opening (co)polymerization of γ-butyrolactone: a review
Song, Q., Zhao, J., Zhang, G., Peruch, F., & Carlotti, S. (2019) · Polymer Journal · doi:10.1038/s41428-019-0265-5 · Cited by 59
Block Poly(carbonate‐ester) Ionomers as High‐Performance and Recyclable Thermoplastic Elastomers
Gregory, G. L., Sulley, G. S., Kimpel, J., Łagodzińska, M., Häfele, L., Carrodeguas, L. P., & Williams, C. K. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202210748 · Cited by 56
Inherently degradable cross-linked polyesters and polycarbonates: resins to be cheerful
Şucu, T., & Shaver, M. P. (2020) · Polymer Chemistry · doi:10.1039/d0py01226b · Cited by 59
Tang, B., Schneiderman, D. K., Bidoky, F. Z., Frisbie, C. D., & Lodge, T. P. (2017) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00582 · Cited by 59
Self-citationSaini, P. K., Fiorani, G., Mathers, R. T., & Williams, C. K. (2017) · Chemistry - A European Journal · doi:10.1002/chem.201605690 · Cited by 53
Amador, A. G., Watts, A., Neitzel, A. E., & Hillmyer, M. A. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b00065 · Cited by 56
Self-citationXiong, W.-T., Wu, G., Chen, S., & Wang, Y. (2023) · Science China Chemistry · doi:10.1007/s11426-023-1639-2 · Cited by 54
Sustainable Triblock Copolymers as Tunable and Degradable Pressure Sensitive Adhesives
Kim, H. J., Jin, K., Shim, J., Dean, W., Hillmyer, M. A., & Ellison, C. J. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c03158 · Cited by 53
Self-citationOne‐Pot Synthesis of Depolymerizable δ‐Lactone Based Vitrimers
Yue, L., Su, Y., Li, M., Yu, L., Montgomery, S. M., Sun, X., Finn, M. G., Gutekunst, W. R., Ramprasad, R., & Qi, H. J. (2023) · Advanced Materials · doi:10.1002/adma.202300954 · Cited by 56
Chemically recyclable polyesters from CO2, H2, and 1,3-butadiene
Lou, Y., Xu, L., Gan, N., Sun, Y., & Lin, B. (2022) · The Innovation · doi:10.1016/j.xinn.2022.100216 · Cited by 61
Liu, Y., & Lu, X. (2023) · Chemistry - A European Journal · doi:10.1002/chem.202203635 · Cited by 53
Kim, M., Lee, Y., & Moon, H. R. (2024) · Accounts of Chemical Research · doi:10.1021/acs.accounts.4c00290 · Cited by 46
Batiste, D. C., Meyersohn, M. S., Watts, A., & Hillmyer, M. A. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c00050 · Cited by 52
Self-citationSynthesis and mechanistic investigations of pH-responsive cationic poly(aminoester)s
Blake, T. R., Ho, W. C., Turlington, C. R., Zang, X., Huttner, M. A., Wender, P. A., & Waymouth, R. M. (2020) · Chemical Science · doi:10.1039/c9sc05267d · Cited by 47
Gregory, G. L., & Williams, C. K. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00068 · Cited by 47
Lv, A., Cui, Y., Du, F., & Li, Z. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b01325 · Cited by 46
Sigmatropic Rearrangements of Polymer Backbones: Vinyl Polymers from Polyesters in One Step
Ditzler, R. A. J., & Zhukhovitskiy, A. V. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c09657 · Cited by 47
Chen, X., Wang, L., Liu, Y., Niu, H., Shen, Y., & Li, Z. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00920 · Cited by 46
Mao, L., Liu, Y., Wu, H., Chen, J., & Yao, J. B. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.09.031 · Cited by 43
Duparc, V. H., Shakaroun, R. M., Slawinski, M., Carpentier, J., & Guillaume, S. M. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109858 · Cited by 47
Mg( ii ) heterodinuclear catalysts delivering carbon dioxide derived multi-block polymers
Rosetto, G., Deacy, A. C., & Williams, C. K. (2021) · Chemical Science · doi:10.1039/d1sc03856g · Cited by 43
Zhu, X., Yang, G., Xie, R. J., & Wu, G. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202115189 · Cited by 42
Zhao, N., Ren, C., Li, H., Li, Y., Liu, S., & Li, Z. (2017) · Angewandte Chemie · doi:10.1002/ange.201707122 · Cited by 43
Ke, D., Espinosa, N. Á., Mallet‐Ladeira, S., Monot, J., Martín-Vaca, B. M., & Bourissou, D. (2016) · Advanced Synthesis & Catalysis · doi:10.1002/adsc.201600382 · Cited by 42
Kakde, D., Taresco, V., Bansal, K. K., Magennis, E. P., Howdle, S. M., Mantovani, G., Irvine, D. J., & Alexander, C. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb01839d · Cited by 39
Shi, T., Luo, W., Liu, S., & Li, Z. (2018) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.28932 · Cited by 39
Block Copolymer Pressure-Sensitive Adhesives Derived from Fatty Acids and Triacetic Acid Lactone
Sajjad, H., Tolman, W. B., & Reineke, T. M. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00317 · Cited by 43
Toughening CO 2 ‐Derived Copolymer Elastomers Through Ionomer Networking
Poon, K. C., Gregory, G. L., Sulley, G. S., Vidal, F., & Williams, C. K. (2023) · Advanced Materials · doi:10.1002/adma.202302825 · Cited by 39
Recent Advances in Monomer Design for Recyclable Polymers
Cai, Z., Liu, Y., Tao, Y., & Zhu, J. (2022) · 化学学报 · doi:10.6023/a22050235 · Cited by 36
Yuntawattana, N., McGuire, T. M., Durr, C. B., Buchard, A., & Williams, C. K. (2020) · Catalysis Science & Technology · doi:10.1039/d0cy01484b · Cited by 35
Statistical Copolymerization of Epoxides and Lactones to High Molecular Weight
Chwatko, M., & Lynd, N. A. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00410 · Cited by 38
Isono, T., Nakahira, S., Hsieh, H., Katsuhara, S., Mamiya, H., Yamamoto, T., Chen, W., Borsali, R., Tajima, K., & Satoh, T. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c00611 · Cited by 35
Schwartz, J. M., Engler, A. C., Phillips, O., Lee, J., & Kohl, P. A. (2017) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.28888 · Cited by 36
Influence of rheology on renewable pressure-sensitive adhesives from a triblock copolymer
Ewert, T. R., Mannion, A. M., Coughlin, M. L., Macosko, C. W., & Bates, F. S. (2017) · Journal of Rheology · doi:10.1122/1.5009194 · Cited by 34
Huang, H.-Y., Xie, M., Wang, S.-Q., Huang, Y.-T., Luo, Y.-H., Yu, D.-G., Cai, Z., & Zhu, J.-B. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.4c17703 · Cited by 33
Kilogram-Scale Preparation of Poly(ethylene oxalate) toward Marine-Degradable Plastics
Tu, Z., Lu, Y., Sang, L., Zhang, Y. X., Li, Y., & Wei, Z. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00003 · Cited by 34
Large-area fabrication and applications of patterned surface with anisotropic superhydrophobicity
Wang, Y., Gao, C., Zhao, W., Zheng, G., Ji, Y., Dai, K., Mi, L., Zhang, D., Liu, C., & Shen, C. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147027 · Cited by 34
Song, Q., Xia, Y., Hu, S., Zhao, J., & Zhang, G. (2016) · Polymer · doi:10.1016/j.polymer.2016.09.026 · Cited by 34
Wu, K., Chen, X., Gu, S., Cui, S., Yang, X., Yu, L., & Ding, J. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c00959 · Cited by 32
A Thermodynamic Roadmap for the Grafting-through Polymerization of PDMS11MA
Martinez, M. R., Cong, Y., Sheiko, S. S., et al. (2020) · ACS Macro Letters · doi:10.1021/acsmacrolett.0c00350 · Cited by 31
McGuire, T. M., Ning, D., Buchard, A., & Williams, C. K. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.5c04603 · Cited by 32
“18 Chen and co-workers have been especially interested in exploiting such polymerization/depolymerization equilibria to produce high-performance, chemically recyclable polyesters that have equivalent or better properties than current plastics such as polyethylene and polypropylene.”
Metadata
- Authors
- Schneiderman, D. K., & Hillmyer, M. A.
- Affiliations
- University of Minnesota (US)
- Corresponding author
- Hillmyer, Marc A.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-09
- Volume
- 49
- Issue
- 7
- Pages
- 2419-2428
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2294244603
- Semantic Scholar
- 8bfefebfd4d868ef41de44dc0bb7f16c5f98aea9
- Cited by
- 290
- References
- 82
- Citations by year
- 2026: 27 · 2025: 28 · 2024: 34 · 2023: 37 · 2022: 34 · 2021: 27 · 2020: 30 · 2019: 20 · 2018: 19 · 2017: 21 · 2016: 13
- FWCI
- 9.94
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Macromolecules (publishedVersion, other-oa)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- Basic Energy Sciences (DEAC02-06CH11357)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- δ-valerolactone, N-alkyl substituents, polymerization kinetics, polymerization thermodynamics, structure-property relationships, substituent position, solubility parameter, biodegradable polymers, sustainable materials, self-assembled materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.