The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks
Abstract
Oxygen inhibition is a phenomenon that directly impacts the print fidelity of 3D biofabricated and photopolymerized hydrogel constructs. It typically results in the undesirable physical collapse of fabricated constructs due to impaired cross-linking, and is an issue that generally remains unreported in the literature. In this study, we describe a systematic approach to minimizing oxygen inhibition in photopolymerized gelatin-methacryloyl (Gel-MA)-based hydrogel constructs, by comparing a new visible-light initiating system, Vis + ruthenium (Ru)/sodium persulfate (SPS) to more conventionally adopted ultraviolet (UV) + Irgacure 2959 system. For both systems, increasing photoinitiator concentration and light irradiation intensity successfully reduced oxygen inhibition. However, the UV + I2959 system was detrimental to cells at both high I2959 concentrations and UV light irradiation intensities. The Vis + Ru/SPS system yielded better cell cyto-compatibility, where encapsulated cells remained >85% viable even at high Ru/SPS concentrations and visible-light irradiation intensities for up to 21 days, further highlighting the potential of this system to biofabricate cell-laden constructs with high shape fidelity, cell viability, and metabolic activity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Cell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
The design of scaffolds for use in tissue engineering. Part I. Traditional factors
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2001) · Tissue Engineering · doi:10.1089/107632701753337645 · Cited by 2,234
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Structural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels
Van Den Bulcke, A. I., Bogdanov, B., De Rooze, N., Schacht, E. H., Cornelissen, M., & Berghmans, H. (2000) · Biomacromolecules · doi:10.1021/bm990017d · Cited by 1,536
Cell Encapsulation in Biodegradable Hydrogels for Tissue Engineering Applications
Nicodemus, G. D., & Bryant, S. J. (2008) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2007.0332 · Cited by 1,239
Fairbanks, B. D., Schwartz, M. P., Bowman, C. N., & Anseth, K. S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.08.055 · Cited by 1,200
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944
Loessner, D., Meinert, C., Kaemmerer, E., Martine, L. C., Yue, K., Levett, P. A., Klein, T. J., Melchels, F. P. W., Khademhosseini, A., & Hutmacher, D. W. (2016) · Nature Protocols · doi:10.1038/nprot.2016.037 · Cited by 868
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 846
Schuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
Bryant, S. J., Nuttelman, C. R., & Anseth, K. S. (2000) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856200743805 · Cited by 774
Biofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
Self-citationReinforcement of hydrogels using three-dimensionally printed microfibres
Visser, J., Melchels, F. P. W., Jeon, J. E., van Bussel, E. M., Kimpton, L. S., Byrne, H. M., Dhert, W. J. A., Dalton, P. D., Hutmacher, D. W., & Malda, J. (2015) · Nature Communications · doi:10.1038/ncomms7933 · Cited by 718
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Woodfield, T. B. F., Malda, J., de Wijn, J., Péters, F., Riesle, J., & van Blitterswijk, C. A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.056 · Cited by 618
Self-citation3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Kinetic approach of oxygen inhibition in ultraviolet- and laser-induced polymerizations
Decker, C., & Jenkins, A. D. (1985) · Macromolecules · doi:10.1021/ma00148a034 · Cited by 527
Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing
Hochleitner, G., Jüngst, T., Brown, T. D., Hahn, K., Moseke, C., Jakob, F., Dalton, P. D., & Groll, J. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035002 · Cited by 385
Additive manufacturing techniques for the production of tissue engineering constructs
Mota, C., Puppi, D., Chiellini, F., & Chiellini, E. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1635 · Cited by 382
Nuttelman, C. R., Henry, S. M., & Anseth, K. S. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00093-5 · Cited by 244
Development and characterisation of a new bioink for additive tissue manufacturing
Melchels, F. P. W., Dhert, W. J. A., Hutmacher, D. W., & Malda, J. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21280g · Cited by 222
Visible light crosslinkable chitosan hydrogels for tissue engineering
Hu, J., Hou, Y., Park, H., Choi, B., Hou, S., Chung, A., & Lee, M. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.01.029 · Cited by 212
Visible‐Light‐Mediated Thiol‐Ene Hydrogelation Using Eosin‐Y as the Only Photoinitiator
Shih, H., & Lin, C. (2013) · Macromolecular Rapid Communications · doi:10.1002/marc.201200605 · Cited by 209
Beyond Transplantation: Third Annual Samuel Jason Mixter Lecture
Vacanti, J. P. (1988) · Archives of Surgery · doi:10.1001/archsurg.1988.01400290027003 · Cited by 177
Covalent incorporation of non-chemically modified gelatin into degradable PVA-tyramine hydrogels
Lim, K. S., Alves, M.-H., Poole-Warren, L. A., & Martens, P. J. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.06.005 · Cited by 152
Self-citationCombined additive manufacturing approaches in tissue engineering
Giannitelli, S. M., Mozetic, P., Trombetta, M., & Rainer, A. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.06.032 · Cited by 135
Bae, H., Ahari, A. F., Shin, H., Nichol, J. W., Hutson, C. B., Masaeli, M., Kim, S., Aubin, H., Yamanlar, S., & Khademhosseini, A. (2011) · Soft Matter · doi:10.1039/c0sm00697a · Cited by 130
Fancy, D. A., Denison, C., Kim, K., Xie, Y., Holdeman, T. C., Amini, F., & Kodadek, T. J. (2000) · Chemistry & Biology · doi:10.1016/s1074-5521(00)00020-x · Cited by 127
Mazaki, T., Shiozaki, Y., Yamane, K., Yoshida, A., Nakamura, M., Yoshida, Y., Zhou, D., Kitajima, T., Tanaka, M., Ito, Y., et al. (2014) · Scientific Reports · doi:10.1038/srep04457 · Cited by 126
Crosslinkable Hydrogels Derived from Cartilage, Meniscus, and Tendon Tissue
Visser, J., Levett, P. A., Moller, N. C. R. T., Besems, J., Boere, K. W. M., van Rijen, M. H. P., de Grauw, J. C., Dhert, W. J. A., van Weeren, P. R., & Malda, J. (2015) · Tissue Engineering Part A · doi:10.1089/ten.tea.2014.0362 · Cited by 117
Modular Tissue Assembly Strategies for Biofabrication of Engineered Cartilage
Schon, B. S., Hooper, G. J., & Woodfield, T. B. F. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1609-3 · Cited by 101
Self-citationDahle, J., Kvam, E., & Stokke, T. (2005) · Journal of Carcinogenesis · doi:10.1186/1477-3163-4-11 · Cited by 82
Costa, P. F., Puga, A. M., Díaz-Gomez, L., Concheiro, A., Busch, D. H., & Alvarez-Lorenzo, C. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.10.055 · Cited by 78
Bartnikowski, M., Bartnikowski, N., Woodruff, M. A., Schrobback, K., & Klein, T. J. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.08.038 · Cited by 66
The Influence of Silkworm Species on Cellular Interactions with Novel PVA/Silk Sericin Hydrogels
Lim, K. S., Kundu, J., Reeves, A., Poole-Warren, L. A., Kundu, S. C., & Martens, P. J. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201100292 · Cited by 65
Self-citationPromoting Cell Survival and Proliferation in Degradable Poly(vinyl alcohol)–Tyramine Hydrogels
Lim, K. S., Ramaswamy, Y., Roberts, J. J., Alves, M.-H., Poole-Warren, L. A., & Martens, P. J. (2015) · Macromolecular Bioscience · doi:10.1002/mabi.201500121 · Cited by 61
Self-citationTissue Engineered Constructs: Perspectives on Clinical Translation
Lu, L., Arbit, H. M., Herrick, J. L., Segovis, S. G., Maran, A., & Yaszemski, M. J. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-015-1280-0 · Cited by 57
Costa, P. F., Vaquette, C., Baldwin, J., Chhaya, M. P., Gomes, M. E., Reis, R. L., Theodoropoulos, C., & Hutmacher, D. W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035006 · Cited by 55
Tensile properties of bioactive fibers for tissue engineering applications
Diego, M. A. D., Coleman, N. J., & Hench, L. L. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(2000)53:3<258::aid-jbm11>3.0.co;2-o · Cited by 54
Young, C. J., Rozario, K., Serra, C. A., Poole-Warren, L. A., & Martens, P. J. (2013) · Biomicrofluidics · doi:10.1063/1.4816714 · Cited by 35
Nafea, E. H., Poole-Warren, L. A., & Martens, P. J. (2014) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2014.950033 · Cited by 11
Cited by
Photopolymerization in 3D Printing
Bagheri, A., & Jin, J. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00165 · Cited by 1,436
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Volumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495
Metadata
- Authors
- Lim, K. S., Schon, B. S., Mekhileri, N. V., Brown, G. C. J., Chia, C. M., Prabakar, S., Hooper, G. J., & Woodfield, T. B. F.
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-08-12
- Volume
- 2
- Issue
- 10
- Pages
- 1752-1762
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2491221858
- Cited by
- 362
- References
- 44
- FWCI
- 12.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.