The DOI matches its Crossref record; 80 of the 80 references it cites were found in a registry or an index.
Machine Learning Enabled Computational Screening of Inorganic Solid Electrolytes for Suppression of Dendrite Formation in Lithium Metal Anodes
Open accessAbstract
Next generation batteries based on lithium (Li) metal anodes have been plagued by the dendritic electrodeposition of Li metal on the anode during cycling, resulting in short circuit and capacity loss. Suppression of dendritic growth through the use of solid electrolytes has emerged as one of the most promising strategies for enabling the use of Li metal anodes. We perform a computational screening of over 12 000 inorganic solids based on their ability to suppress dendrite initiation in contact with Li metal anode. Properties for mechanically isotropic and anisotropic interfaces that can be used in stability criteria for determining the propensity of dendrite initiation are usually obtained from computationally expensive first-principles methods. In order to obtain a large data set for screening, we use machine-learning models to predict the mechanical properties of several new solid electrolytes. The machine-learning models are trained on purely structural features of the material, which do not require any first-principles calculations. We train a graph convolutional neural network on the shear and bulk moduli because of the availability of a large training data set with low noise due to low uncertainty in their first-principles-calculated values. We use gradient boosting regressor and kernel ridge regression to train the elastic constants, where the choice of the model depends on the size of the training data and the noise that it can handle. The material stiffness is found to increase with an increase in mass density and ratio of Li and sublattice bond ionicity, and decrease with increase in volume per atom and sublattice electronegativity. Cross-validation/test performance suggests our models generalize well. We predict over 20 mechanically anisotropic interfaces between Li metal and four solid electrolytes which can be used to suppress dendrite growth. Our screened candidates are generally soft and highly anisotropic, and present opportunities for simultaneously obtaining dendrite suppression and high ionic conductivity in solid electrolytes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Greedy function approximation: A gradient boosting machine
Friedman, J. H. (2001) · The Annals of Statistics · doi:10.1214/aos/1013203451 · Cited by 30,731
The Elements of Statistical Learning
Hastie, T., Friedman, J., & Tibshirani, R. (2001) · Springer Series in Statistics · doi:10.1007/978-0-387-21606-5 · Cited by 24,162
A decision-theoretic generalization of on-line learning and an application to boosting
Freund, Y., & Schapire, R. E. (1997) · Journal of Computer and System Sciences · doi:10.1006/jcss.1997.1504 · Cited by 20,466
A tutorial on support vector regression
Smola, A. J., & Schölkopf, B. (2004) · Statistics and Computing · doi:10.1023/b:stco.0000035301.49549.88 · Cited by 13,387
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Necessary and sufficient elastic stability conditions in various crystal systems
Mouhat, F., & Coudert, F.-X. (2014) · Physical Review B · doi:10.1103/physrevb.90.224104 · Cited by 5,058
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis
Ong, S. P., Richards, W. D., Jain, A., Hautier, G., Kocher, M., Cholia, S., Gunter, D., Chevrier, V. L., Persson, K. A., & Ceder, G. (2013) · Computational Materials Science · doi:10.1016/j.commatsci.2012.10.028 · Cited by 4,534
MacKay, D. J. C. (1992) · Neural Computation · doi:10.1162/neco.1992.4.3.415 · Cited by 4,388
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
High-power all-solid-state batteries using sulfide superionic conductors
Kato, Y., Hori, S., Saito, T., Suzuki, K., Hirayama, M., Mitsui, A., Yonemura, M., Iba, H., & Kanno, R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.30 · Cited by 3,517
XSEDE: Accelerating Scientific Discovery
Towns, J., Cockerill, T., Dahan, M., Foster, I., Gaither, K., Grimshaw, A., Hazlewood, V., Lathrop, S., Lifka, D., Peterson, G. D., et al. (2014) · Computing in Science & Engineering · doi:10.1109/mcse.2014.80 · Cited by 3,109
Automatic Chemical Design Using a Data-Driven Continuous Representation of Molecules
Gómez-Bombarelli, R., Wei, J. N., Duvenaud, D., Hernández-Lobato, J. M., Sánchez-Lengeling, B., Sheberla, D., Aguilera-Iparraguirre, J., Hirzel, T. D., Adams, R. P., & Aspuru-Guzik, A. (2018) · ACS Central Science · doi:10.1021/acscentsci.7b00572 · Cited by 3,106
Xie, T., & Grossman, J. C. (2018) · Physical Review Letters · doi:10.1103/physrevlett.120.145301 · Cited by 2,828
Self-citationSaal, J. E., Kirklin, S., Aykol, M., Meredig, B., & Wolverton, C. (2013) · JOM · doi:10.1007/s11837-013-0755-4 · Cited by 2,584
High rate and stable cycling of lithium metal anode
Qian, J., Henderson, W. A., Xu, W., Bhattacharya, P., Engelhard, M., Borodin, O., & Zhang, J.-G. (2015) · Nature Communications · doi:10.1038/ncomms7362 · Cited by 2,561
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
The high-throughput highway to computational materials design
Curtarolo, S., Hart, G. L. W., Nardelli, M. B., Mingo, N., Sanvito, S., & Levy, O. (2013) · Nature Materials · doi:10.1038/nmat3568 · Cited by 2,053
Albertus, P., Babinec, S., Litzelman, S., & Newman, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0047-2 · Cited by 1,888
Design principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
The Impact of Elastic Deformation on Deposition Kinetics at Lithium/Polymer Interfaces
Monroe, C., & Newman, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1850854 · Cited by 1,701
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Aurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
Dislocations and Cracks in Anisotropic Elasticity
Stroh, A. N. (1958) · Philosophical Magazine · doi:10.1080/14786435808565804 · Cited by 1,606
Stable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Atomic structure of sensitive battery materials and interfaces revealed by cryo–electron microscopy
Li, Y., Li, Y., Pei, A., Yan, K., Sun, Y., Wu, C.-L., Joubert, L.-M., Chin, R., Koh, A. L., Yu, Y., et al. (2017) · Science · doi:10.1126/science.aam6014 · Cited by 1,547
Design principles for solid-state lithium superionic conductors
Wang, Y., Richards, W. D., Ong, S. P., Miara, L. J., Kim, J. C., Mo, Y., & Ceder, G. (2015) · Nature Materials · doi:10.1038/nmat4369 · Cited by 1,485
Seino, Y., Ota, T., Takada, K., Hayashi, A., & Tatsumisago, M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee41655k · Cited by 1,302
Materials discovery and design using machine learning
Liu, Y., Zhao, T., Ju, W., & Shi, S. (2017) · Journal of Materiomics · doi:10.1016/j.jmat.2017.08.002 · Cited by 1,276
A Critical Review of Li/Air Batteries
Christensen, J., Albertus, P., Sanchez-Carrera, R. S., Lohmann, T., Kozinsky, B., Liedtke, R., Ahmed, J., & Kojic, A. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.086202jes · Cited by 1,041
All solid-state polymer electrolytes for high-performance lithium ion batteries
Yue, L., Ma, J., Zhang, J., Zhao, J., Dong, S., Liu, Z., Cui, G., & Chen, L. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2016.07.003 · Cited by 1,020
Charting the complete elastic properties of inorganic crystalline compounds
de Jong, M., Chen, W., Angsten, T., Jain, A., Notestine, R., Gamst, A., Sluiter, M., Krishna Ande, C., van der Zwaag, S., Plata, J. J., et al. (2015) · Scientific Data · doi:10.1038/sdata.2015.9 · Cited by 1,005
Liu, Y., Lin, D., Yuen, P. Y., Liu, K., Xie, J., Dauskardt, R. H., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605531 · Cited by 990
Khurana, R., Schaefer, J. L., Archer, L. A., & Coates, G. W. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502133j · Cited by 880
Accelerating materials property predictions using machine learning
Pilania, G., Wang, C., Jiang, X., Rajasekaran, S., & Ramprasad, R. (2013) · Scientific Reports · doi:10.1038/srep02810 · Cited by 853
Dendrite Growth in Lithium/Polymer Systems
Monroe, C., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1606686 · Cited by 800
Aurbach, D., Markovsky, B., Shechter, A., Ein‐Eli, Y., & Cohen, H. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1837300 · Cited by 760
Yan, K., Lee, H.-W., Gao, T., Zheng, G., Yao, H., Wang, H., Lu, Z., Zhou, Y., Liang, Z., Liu, Z., et al. (2014) · Nano Letters · doi:10.1021/nl503125u · Cited by 742
Solid Electrolyte: the Key for High‐Voltage Lithium Batteries
Li, J., Ma, C., Chi, M., Liang, C., & Dudney, N. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401408 · Cited by 721
Review—Practical Challenges Hindering the Development of Solid State Li Ion Batteries
Kerman, K., Luntz, A., Viswanathan, V., Chiang, Y.-M., & Chen, Z. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1571707jes · Cited by 712
Self-citationUniversal fragment descriptors for predicting properties of inorganic crystals
Isayev, O., Oses, C., Toher, C., Gossett, E., Curtarolo, S., & Tropsha, A. (2017) · Nature Communications · doi:10.1038/ncomms15679 · Cited by 651
The crystallographic information file (CIF): a new standard archive file for crystallography
Hall, S. R., Allen, F. H., & Brown, I. D. (1991) · Acta Crystallographica Section A Foundations of Crystallography · doi:10.1107/s010876739101067x · Cited by 592
Towards High‐Safe Lithium Metal Anodes: Suppressing Lithium Dendrites via Tuning Surface Energy
Wang, D., Zhang, W., Zheng, W., Cui, X., Rojo, T., & Zhang, Q. (2017) · Advanced Science · doi:10.1002/advs.201600168 · Cited by 548
Artificial Protection Film on Lithium Metal Anode toward Long‐Cycle‐Life Lithium–Oxygen Batteries
Liu, Q., Xu, J., Yuan, S., Chang, Z., Xu, D., Yin, Y., Li, L., Zhong, H., Jiang, Y., Yan, J., et al. (2015) · Advanced Materials · doi:10.1002/adma.201501490 · Cited by 482
Lithium superionic conduction in lithium borohydride accompanied by structural transition
Matsuo, M., Nakamori, Y., Orimo, S.-I., Maekawa, H., & Takamura, H. (2007) · Applied Physics Letters · doi:10.1063/1.2817934 · Cited by 479
Sendek, A. D., Yang, Q., Cubuk, E. D., Duerloo, K.-A. N., Cui, Y., & Reed, E. J. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02697d · Cited by 448
Stone, G. M., Mullin, S. A., Teran, A. A., Hallinan, D. T., Minor, A. M., Hexemer, A., & Balsara, N. P. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.030203jes · Cited by 438
Impact of air exposure and surface chemistry on Li–Li7La3Zr2O12 interfacial resistance
Sharafi, A., Yu, S., Naguib, M., Lee, M., Ma, C., Meyer, H. M., Nanda, J., Chi, M., Siegel, D. J., & Sakamoto, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03162a · Cited by 437
Halide-Stabilized LiBH4, a Room-Temperature Lithium Fast-Ion Conductor
Maekawa, H., Matsuo, M., Takamura, H., Ando, M., Noda, Y., Karahashi, T., & Orimo, S.-I. (2009) · Journal of the American Chemical Society · doi:10.1021/ja807392k · Cited by 410
Elastic Properties of Alkali Superionic Conductor Electrolytes from First Principles Calculations
Deng, Z., Wang, Z., Chu, I.-H., Luo, J., & Ong, S. P. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0061602jes · Cited by 406
The Effect of Interfacial Deformation on Electrodeposition Kinetics
Monroe, C., & Newman, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1710893 · Cited by 394
Tasaki, K., Goldberg, A., Lian, J.-J., Walker, M., Timmons, A., & Harris, S. J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3239850 · Cited by 370
Dendrite-Free Lithium Deposition with Self-Aligned Nanorod Structure
Zhang, Y., Qian, J., Xu, W., Russell, S. M., Chen, X., Nasybulin, E., Bhattacharya, P., Engelhard, M. H., Mei, D., Cao, R., et al. (2014) · Nano Letters · doi:10.1021/nl5039117 · Cited by 365
Steiger, J., Kramer, D., & Mönig, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.029 · Cited by 363
Factors Which Limit the Cycle Life of Rechargeable Lithium (Metal) Batteries
Aurbach, D., Zinigrad, E., Teller, H., & Dan, P. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393349 · Cited by 340
Tang, W. S., Unemoto, A., Zhou, W., Stavila, V., Matsuo, M., Wu, H., Orimo, S.-I., & Udovic, T. J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02941d · Cited by 314
Xu, C., Ahmad, Z., Aryanfar, A., Viswanathan, V., & Greer, J. R. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615733114 · Cited by 302
Self-citationMorales-García, Á., Valero, R., & Illas, F. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b07421 · Cited by 296
Strong texturing of lithium metal in batteries
Shi, F., Pei, A., Vailionis, A., Xie, J., Liu, B., Zhao, J., Gong, Y., & Cui, Y. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1708224114 · Cited by 283
Sharafi, A., Haslam, C. G., Kerns, R. D., Wolfenstine, J., & Sakamoto, J. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta06790a · Cited by 272
Tang, W. S., Matsuo, M., Wu, H., Stavila, V., Zhou, W., Talin, A. A., Soloninin, A. V., Skoryunov, R. V., Babanova, O. A., Skripov, A. V., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502237 · Cited by 254
Fujimura, K., Seko, A., Koyama, Y., Kuwabara, A., Kishida, I., Shitara, K., Fisher, C. A. J., Moriwake, H., & Tanaka, I. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300060 · Cited by 244
de Jong, M., Chen, W., Notestine, R., Persson, K., Ceder, G., Jain, A., Asta, M., & Gamst, A. (2016) · Scientific Reports · doi:10.1038/srep34256 · Cited by 243
Aryanfar, A., Brooks, D., Merinov, B. V., Goddard, W. A., Colussi, A. J., & Hoffmann, M. R. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500207a · Cited by 226
Predicting the Mechanical Properties of Zeolite Frameworks by Machine Learning
Evans, J. D., & Coudert, F.-X. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02532 · Cited by 202
Performance Metrics Required of Next-Generation Batteries to Make a Practical Electric Semi Truck
Sripad, S., & Viswanathan, V. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00432 · Cited by 198
Self-citationBridges: a uniquely flexible HPC resource for new communities and data analytics
Nystrom, N. A., Levine, M. J., Roskies, R. Z., & Scott, J. R. (2015) · Proceedings of the 2015 XSEDE Conference on Scientific Advancements Enabled by Enhanced Cyberinfrastructure - XSEDE '15 · doi:10.1145/2792745.2792775 · Cited by 195
Stability of Electrodeposition at Solid-Solid Interfaces and Implications for Metal Anodes
Ahmad, Z., & Viswanathan, V. (2017) · Physical Review Letters · doi:10.1103/physrevlett.119.056003 · Cited by 183
Self-citationLu, Z., & Ciucci, F. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03284 · Cited by 165
Statistical geometrical approach to random packing density of equal spheres
Gotoh, K., & Finney, J. (1974) · Nature · doi:10.1038/252202a0 · Cited by 131
Consequences of air exposure on the lithiated graphite SEI
Malmgren, S., Ciosek, K., Lindblad, R., Plogmaker, S., Kühn, J., Rensmo, H., Edström, K., & Hahlin, M. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.04.118 · Cited by 128
Sripad, S., & Viswanathan, V. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0671711jes · Cited by 64
Self-citationRole of anisotropy in determining stability of electrodeposition at solid-solid interfaces
Ahmad, Z., & Viswanathan, V. (2017) · Physical Review Materials · doi:10.1103/physrevmaterials.1.055403 · Cited by 29
Self-citation
Cited by
Fundamentals of inorganic solid-state electrolytes for batteries
Famprikis, T., Canepa, P., Dawson, J. A., Islam, M. S., & Masquelier, C. (2019) · Nature Materials · doi:10.1038/s41563-019-0431-3 · Cited by 2,525
Zheng, Y., Yao, Y., Ou, J., Li, M., Luo, D., Dou, H., Li, Z., Amine, K., Yu, A., & Chen, Z. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00305k · Cited by 1,030
Lithium Batteries and the Solid Electrolyte Interphase (SEI)—Progress and Outlook
Adenusi, H., Chass, G. A., Passerini, S., Tian, K. V., & Chen, G. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202203307 · Cited by 830
Predicting the state of charge and health of batteries using data-driven machine learning
Ng, M.-F., Zhao, J., Yan, Q., Conduit, G. J., & Seh, Z. W. (2020) · Nature Machine Intelligence · doi:10.1038/s42256-020-0156-7 · Cited by 793
Current and future lithium-ion battery manufacturing
Liu, Y., Zhang, R., Wang, J., & Wang, Y. (2021) · iScience · doi:10.1016/j.isci.2021.102332 · Cited by 763
Metadata
- Authors
- Ahmad, Z., Xie, T., Maheshwari, C., Grossman, J. C., & Viswanathan, V.
- Venue
- ACS Central Science
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-08-10
- Volume
- 4
- Issue
- 8
- Pages
- 996-1006
- ISSN
- 2374-7943 (ISSN-L)
- 2374-7951
- OpenAlex
- W2797406032
- Cited by
- 279
- References
- 80
- FWCI
- 7.32
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.