Homogeneous Suspensions of Individualized Microfibrils from TEMPO-Catalyzed Oxidation of Native Cellulose
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Never-dried native celluloses (bleached sulfite wood pulp, cotton, tunicin, and bacterial cellulose) were disintegrated into individual microfibrils after oxidation mediated by the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical followed by a homogenizing mechanical treatment. When oxidized with 3.6 mmol of NaClO per gram of cellulose, almost the totality of sulfite wood pulp and cotton were readily disintegrated into long individual microfibrils by a treatment with a Waring Blendor, yielding transparent and highly viscous suspensions. When observed by transmission electron microscopy, the wood pulp and cotton microfibrils exhibited a regular width of 3-5 nm. Tunicin and bacterial cellulose could be disintegrated by sonication. A bulk degree of oxidation of about 0.2 per one anhydroglucose unit of cellulose was necessary for a smooth disintegration of sulfite wood pulp, whereas only small amounts of independent microfibrils were obtained at lower oxidation levels. This limiting degree of oxidation decreased in the following order: sulfite wood pulp > cotton > bacterial cellulose, tunicin.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [85]
Citations
Cites
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., & Isogai, A. (2004) · Biomacromolecules · doi:10.1021/bm0497769 · Cited by 1,292
Self-citationPolymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766
Liquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
The structure and mechanical properties of sheets prepared from bacterial cellulose
Yamanaka, S., Watanabe, K., Kitamura, N., Iguchi, M., Mitsuhashi, S., Nishi, Y., & Uryu, M. (1989) · Journal of Materials Science · doi:10.1007/bf01139032 · Cited by 612
Combined infrared and electron diffraction study of the polymorphism of native celluloses
Sugiyama, J., Persson, J., & Chanzy, H. (1991) · Macromolecules · doi:10.1021/ma00009a050 · Cited by 541
de Nooy, A. E. J., Besemer, A. C., & van Bekkum, H. (1995) · Carbohydrate Research · doi:10.1016/0008-6215(94)00343-e · Cited by 471
Preparation of Polyuronic Acid from Cellulose by TEMPO-mediated Oxidation
Isogai, A., & Kato, Y. (1998) · Cellulose · doi:10.1023/a:1009208603673 · Cited by 437
Self-citationCellulose Biosynthesis: Current Views and Evolving Concepts
SAXENA, I. M., & BROWN, R. M. (2005) · Annals of Botany · doi:10.1093/aob/mci155 · Cited by 424
Research works printed but not linked: 5
- Lepoutre P., 1974, TAPPI, 57, 87
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Saito T., 2005, TAPPI J., 4, 3
- Saito, T.; Okita, Y.; Nge, T. T.; Sugiyama, J.; Isogai, A. Carbohydr. Polym. , in press.
Cited by
Items 901–1,000 of 1,002
Micronized cellulose from citrus processing waste using water and electricity only
Jitan, S. A., Scurria, A., Albanese, L., Pagliaro, M., Meneguzzo, F., Zabini, F., Sakkaf, R. A., Yusuf, A., Palmisano, G., & Ciriminna, R. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.02.042 · Cited by 30
“588 Eight years later, the team in collaboration with Vignon discovered that native celluloses could be fibrillated in 3–5 nm nanofibrils by simple mechanical homogenization of the solution containing the TEMPOoxidized cellulose [11].”
BackgroundCellulose Nanocrystals Examined by Atomic Force Microscopy: Applications and Fundamentals
Moud, A. A. (2022) · ACS Food Science & Technology · doi:10.1021/acsfoodscitech.2c00289 · Cited by 33
Luo, Q., Liu, Y., Zhou, G., & Xu, X. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121451 · Cited by 30
Clean and reactive nanostructured cellulose surface
Österberg, M., Peresin, M. S., Johansson, L., & Tammelin, T. (2013) · Cellulose · doi:10.1007/s10570-013-9920-8 · Cited by 30
“The main reasons for the growing interest in nanocellulose are the development of energy efficient and up-scalable production methods (Pääkkö et al. 2007; Saito et al. 2006; Wågberg et al. 2008) and the extraordinary properties of this renewable material (Eichhorn et al. 2010).”
MethodDegradation of TEMPO-oxidized cellulose fibers and nanofibrils by crude cellulase
Homma, I., Isogai, T., Saito, T., & Isogai, A. (2013) · Cellulose · doi:10.1007/s10570-013-9872-z · Cited by 30
“…with homogeneous 3–4 nm widths and lengths of [1 lm from wood celluloses by 2,2,6,6- tetramethylpiperidine-1-oxyl radical (TEMPO)-mediated oxidation in water and successive mechanical disintegration of the TEMPO-oxidized celluloses in water (Saito et al. 2006, 2007, 2009; Isogai et al. 2011).”
BackgroundSelf-citationChinga‐Carrasco, G., Miettinen, A., Hendriks, C. L. L., Gamstedt, E. K., & Kataj, M. (2011) · InTech eBooks · doi:10.5772/21580 · Cited by 38
Polyvinylamine-graft-TEMPO Adsorbs onto, Oxidizes, and Covalently Bonds to Wet Cellulose
Pelton, R. H., Ren, P., Liu, J., & Mijolovic, D. (2011) · Biomacromolecules · doi:10.1021/bm200101b · Cited by 30
Hải, L. V., Kim, H. C., Kafy, A., Zhai, L., Kim, J. W., & Kim, J. (2017) · Cellulose · doi:10.1007/s10570-017-1333-7 · Cited by 30
Solala, I., Bordes, R., & Larsson, A. (2017) · Cellulose · doi:10.1007/s10570-017-1608-z · Cited by 30
“I. Solala PO Box 16300, 00076 Aalto, Finland Pääkkö et al. 2007; Saito et al. 2006; Wågberg et al. 2008).”
Lomelí-Ramírez, M. G., Valdez-Fausto, E. M., Rentería-Urquiza, M., Jiménez-Amezcua, R. M., Hernández, J. A., Torres-Rendón, J. G., & García-Enriquez, S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.08.045 · Cited by 30
Huang, W. (2017) · Elsevier eBooks · doi:10.1016/b978-0-323-48019-2.00005-0 · Cited by 35
A Thixotropic, Cell-Infiltrative Nanocellulose Hydrogel That Promotes in Vivo Tissue Remodeling
Nishiguchi, A., & Taguchi, T. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01549 · Cited by 34
Extraction and Production of Cellulose Nanofibers
Vázquez, A., Foresti, M. L., Morán, J., & Cyras, V. P. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_57 · Cited by 37
Influence on Pore Structure of Micro/Nanofibrillar Cellulose in Pigmented Coating Formulations
Dimić‐Mišić, K., Ridgway, C. J., Maloney, T. C., Paltakari, J., & Gane, P. A. C. (2014) · Transport in Porous Media · doi:10.1007/s11242-014-0293-8 · Cited by 33
“The sample NFC was produced in a pilot process by oxidising the Birch Kraft pulp using TEMPO catalyst, then fibrillating (Saito and Isogai 2005; Saito et al. 2006).”
MethodPreparation of Ion-Exchanged TEMPO-Oxidized Celluloses as Flame Retardant Products
Geng, C., Zhao, Z., Xue, Z., Xu, P., & Xia, Y. (2019) · Molecules · doi:10.3390/molecules24101947 · Cited by 29
“The results are consistent with other reports [14,15].”
ResultFarooq, A., Jiang, S., Farooq, A., Naeem, M. A., Ahmad, A., & Liu, L. (2019) · Journal of Industrial Textiles · doi:10.1177/1528083719887533 · Cited by 29
“Additionally, TEMPO does not change the crystallographic forms of the cellulosic fibers, which is beneficial in the application of nano-composite materials [25].”
BackgroundChen, Y., Hu, Y., Chen, J., Lu, Y., Zhao, Z., Akbar, A. R., Yang, Q., Shi, Z., & Xiong, C. (2021) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2021.127003 · Cited by 29
Zhang, K., Zhang, H., & Wang, W. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.09.055 · Cited by 29
Noda, T., Hatakeyama, M., & Kitaoka, T. (2022) · Nanomaterials · doi:10.3390/nano12030402 · Cited by 29
“The TEMPO-mediated oxidation is allowed to site-selectively convert hydroxymethyl group to carboxylate one at the C6-position exposed on the crystalline surface of cellulose microfibrils [13].”
MethodYeganeh, F., Chiewchan, N., & Chonkaew, W. (2022) · Cellulose · doi:10.1007/s10570-022-04452-6 · Cited by 30
Extraction of Lignocellulosic Materials From Waste Products
Fortunati, E., Luzi, F., Puglia, D., & Torre, L. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-44248-0.00001-8 · Cited by 44
Dimić‐Mišić, K., Maloney, T. C., Liu, G., & Gane, P. A. C. (2017) · Cellulose · doi:10.1007/s10570-016-1181-x · Cited by 30
Steady-shear and viscoelastic properties of cellulose nanofibril–nanoclay dispersions
Liu, Y., Gordeyeva, K. S., & Bergström, L. (2017) · Cellulose · doi:10.1007/s10570-017-1211-3 · Cited by 29
Ion conductivity through TEMPO-mediated oxidated and periodate oxidated cellulose membranes
Dahlström, C., Durán, V. L., Keene, S. T., Salleo, A., Norgren, M., & Wågberg, L. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115829 · Cited by 29
Sustained‐immunostimulatory nanocellulose scaffold to enhance vaccine efficacy
Nishiguchi, A., & Taguchi, T. (2020) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36890 · Cited by 29
Ellebracht, N. C., & Jones, C. W. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115825 · Cited by 28
Transparent and flexible structurally colored biological nanofiber films for visual gas detection
Shi, M., Bai, L., Wan, D., Chang, J., Li, Q., Yu, H., Liu, S., Tong, W., Chen, W., & Fan, Z. (2022) · Matter · doi:10.1016/j.matt.2022.05.043 · Cited by 28
Emerging green routes to nanocellulose
Ciriminna, R., Ghahremani, M., Karimi, B., & Pagliaro, M. (2022) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.2423 · Cited by 28
Jiang, Y., Wang, X., Meng, Z., Zhang, M., Wang, S., & Liu, X. (2023) · Green Chemistry · doi:10.1039/d3gc04029a · Cited by 28
Boissard, C. I. R., Bourban, P. ‐., Tingaut, P., Zimmermann, T., & Månson, J. E. (2011) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684411407233 · Cited by 29
Prevention of Aggregation of Pectin‐Containing Cellulose Nanofibers Prepared from Mandarin Peel
Hiasa, S., Kumagai, A., Endo, T., & Edashige, Y. (2016) · Journal of Fiber Science and Technology · doi:10.2115/fiberst.2016-0006 · Cited by 29
Dai, L., Long, Z., Zhao, Y., Wang, B., & Chen, J. (2016) · Cellulose · doi:10.1007/s10570-016-0998-7 · Cited by 28
“TEMPO (2,2,6,6- tetramethylpiperidine-1-oxyl)-mediated oxidation is a well-studied method to manufacture individualized nanocellulose, known as TEMPO-oxidized cellulose nanofibers (TOCNs) with the width of 3–5 nm (Saito et al. 2006, 2009).”
MethodBio‐based Nanomaterials and Their Bionanocomposites
Bagal-Kestwal, D., Kestwal, R. M., & Chiang, B. (2016) · Wiley eBooks · doi:10.1002/9783527683772.ch8 · Cited by 30
Coatability of cellulose nanofibril suspensions: Role of rheology and water retention
Kumar, V., Ottesen, V., Syverud, K., Gregersen, Ø. W., & Toivakka, M. (2017) · BioResources · doi:10.15376/biores.12.4.7656-7679 · Cited by 29
“Enzymatic (Pääkkö et al. 2007) and/or chemical pretreatments, such as TEMPO-mediated oxidation (Saito and Isogai 2004; Saito et al. 2006) or carboxymethylation (Wågberg et al. 2008), have also been applied to reduce the energy consumption and simultaneously improve the degree of fibrillation during…”
MethodImidazole, a New Tunable Reagent for Producing Nanocellulose, Part I: Xylan-Coated CNCs and CNFs
Mao, J., Abushammala, H., Hettegger, H., Rosenau, T., & Laborie, M. G. (2017) · Polymers · doi:10.3390/polym9100473 · Cited by 29
“The CNFs, however, are more heterogeneous than CNFs obtained according to traditional mechanical or chemomechanical methods (15 nm or 3–5 nm [36,37]), with a width distribution ranging between 2 and 20 nm (Figure 4b).”
BackgroundUltrasound-assisted conversion of cellulose into hydrogel and functional carbon material
Ching, T. W., Haritos, V. S., & Tanksale, A. (2018) · Cellulose · doi:10.1007/s10570-018-1746-y · Cited by 28
“TEMPO-mediated oxidation of cellulose was able to obtain fine nanocellulose with diameters in the range of 3–4 nm (Saito et al. 2006).”
BackgroundUto, T., & Yui, T. (2018) · ACS Omega · doi:10.1021/acsomega.8b00834 · Cited by 30
Asadnia, M., & Sadat‐Shojai, M. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.139409 · Cited by 29
Ageing of aqueous TEMPO-oxidized nanofibrillated cellulose dispersions: a rheological study
Šebenik, U., Krajnc, M., Alič, B., & Lapasin, R. (2018) · Cellulose · doi:10.1007/s10570-018-2128-1 · Cited by 27
All-natural, hydrophobic, strong paper straws based on biodegradable composite coatings
Yi, Z., Fu, S., Zhang, J., Kong, Y., & Shen, J. (2024) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2024.142243 · Cited by 28
Araki, J., & Yamanaka, Y. (2014) · Polymers for Advanced Technologies · doi:10.1002/pat.3361 · Cited by 28
Kekäläinen, K., Liimatainen, H., & Niinimäki, J. (2014) · Cellulose · doi:10.1007/s10570-014-0363-7 · Cited by 28
Production of Cellulose Nanofibrils and Their Application to Food: A Review
Lee, H., Sundaram, J., & Mani, S. (2017) · Springer eBooks · doi:10.1007/978-981-10-4678-0_1 · Cited by 34
Nanocellulose in the Paper Making
Lengowski, E. C., Júnior, E. A. B., Kumode, M. M. N., Carneiro, M. E., & Satyanarayana, K. G. (2019) · Springer eBooks · doi:10.1007/978-3-030-05399-4_36 · Cited by 44
Kriechbaum, K., Apostolopoulou‐Kalkavoura, V., Munier, P., & Bergström, L. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c05601 · Cited by 28
Modifying cellulose fiber surfaces in the manufacture of natural fiber composites
Gandini, A., & Belgacem, M. N. (2011) · Elsevier eBooks · doi:10.1533/9780857092281.1.3 · Cited by 30
Nano-cellulosic materials: The impact of water on their dissolution in DMAc/LiCl
Hasani, M., Henniges, U., Idström, A., Nordstierna, L., Westman, G., Rosenau, T., & Potthast, A. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.07.001 · Cited by 27
Cellulose nanocrystal research; A personal perspective
Gray, D. G. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116888 · Cited by 27
Pöhler, T., Mautner, A., Aguilar-Sánchez, A., Hansmann, B., Kunnari, V., Grönroos, A., Rissanen, V., Siqueira, G. D. F., Mathew, A. P., & Tammelin, T. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.120341 · Cited by 26
Yang, F., Wang, X., Yuan, M., Liang, M., Chen, Y., & Zou, H. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c03585 · Cited by 26
Zhang, X., Kitin, P., Agarwal, U. P., Gleisner, R., & Zhu, J. Y. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120996 · Cited by 26
Dimić‐Mišić, K., Hummel, M., Paltakari, J., Sixta, H., Maloney, T. C., & Gane, P. A. C. (2015) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2015.01.004 · Cited by 27
Brodin, F. W., & Theliander, H. (2013) · Cellulose · doi:10.1007/s10570-013-0037-x · Cited by 26
“Analyses of the fiber length and the content of fines of the disintegrated samples showed that the samples treated with harsher oxidations were easier to disintegrate than samples treated with milder oxidation, in accordance with e.g. Saito et al. (2006) and Brodin and Theliander (2012).”
Dibutyrylchitin nanoparticles as novel drug carrier
Jain, T., Kumar, S., & Dutta, P. K. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.11.031 · Cited by 27
Kuang, Y., Chen, G., Ming, S., Wu, Z., & Fang, Z. (2016) · Cellulose · doi:10.1007/s10570-016-0906-1 · Cited by 26
“In addition, the higher negative surface charge of TEMPOtreatedCNFs upon introduction of carboxyl groups at theC6 position of cellulose leads to a uniform diameter distribution (Fukuzumi et al. 2008; Isogai et al. 2011; Saito et al. 2006).”
BackgroundSakakibara, K., Moriki, Y., & Tsujii, Y. (2018) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00071 · Cited by 26
Structural characterization of carboxyl cellulose nanofibers extracted from underutilized sources
Zhan, C., Sharma, P. R., Geng, L., Sharma, S. K., Wang, R., Joshi, R., & Hsiao, B. S. (2019) · Science China Technological Sciences · doi:10.1007/s11431-018-9441-1 · Cited by 26
Selkälä, T., Suopajärvi, T., Sirviö, J. A., Luukkοnen, T., Kinnunen, P., Kling, K. I., Wagner, J. B., & Liimatainen, H. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.06.008 · Cited by 26
Micro-structural characterisation of homogeneous and layered MFC nano-composites
Chinga‐Carrasco, G., Аверьянова, Н. В., Gibadullin, M. R., Petrov, V. А., Leirset, I., & Syverud, K. (2012) · Micron · doi:10.1016/j.micron.2012.08.005 · Cited by 26
Qiao, Q., Li, X., & Huang, L. (2019) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.9b00701 · Cited by 27
Villada, Y., Iglesias, M. C., Olivares, M. L., Casís, N., Zhu, J. Y., Peresin, M. S., & Estenoz, D. A. (2020) · Cellulose · doi:10.1007/s10570-020-03502-1 · Cited by 27
Lu, B., Lin, Q., Zhu, Y., Lin, F., Chen, X., & Huang, B. (2020) · Cellulose · doi:10.1007/s10570-020-03553-4 · Cited by 25
Bastida, G. A., Schnell, C. N., Mocchiutti, P., Solier, Y. N., Inalbon, M. C., Zanuttini, M. A. M., & Galván, M. V. (2022) · Nanomaterials · doi:10.3390/nano12172908 · Cited by 29
Ng, T. S., Ching, Y. C., Hashim, N. A., Ishenny, N., & Rahman, M. R. (2014) · Materials Research Innovations · doi:10.1179/1432891714z.000000000986 · Cited by 29
ABSORBENT MATERIALS BASED ON KRAFT PULP: PREPARATION AND MATERIAL CHARACTERIZATION
Brodin, F. W., & Theliander, H. (2012) · BioResources · doi:10.15376/biores.7.2.1666-1683 · Cited by 26
“The amount of carboxylate groups and the selectivity of carboxylate group formation are in agreement with the results in earlier studies (Saito et al. 2006, 2007) on the effect of TEMPO-oxidation on chemical pulps.”
MethodResultSEC-MALLS analysis of TEMPO-oxidized celluloses using methylation of carboxyl groups
Hiraoki, R., Fukuzumi, H., Ono, Y., Saito, T., & Isogai, A. (2013) · Cellulose · doi:10.1007/s10570-013-0090-5 · Cited by 25
“The TEMPO-oxidized native celluloses (TOCs) with sufficient amounts of carboxyl groups ([1 mmol g-1) thus obtained are convertible to TOC nanofibrils (TOCNs) through mild mechanical disintegration treatment in water (Saito et al. 2006, 2007; Isogai et al. 2011).”
BackgroundMethodSelf-citationMao, Y., Su, Y., & Hsiao, B. S. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.01.032 · Cited by 27
Soeta, H., Fujisawa, S., Saito, T., & Isogai, A. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.05.010 · Cited by 27
Self-citationLima, H. L. S., Gonçalves, C., Cerqueira, M. Â., do Nascimento, E. S., Gama, M., Rosa, M. D. F., Borges, M. D. F., Pastrana, L. M., & Brígida, A. I. S. (2018) · Cellulose · doi:10.1007/s10570-018-1983-0 · Cited by 26
Hanhikoski, S., Solala, I., Lahtinen, P., Niemelä, K., & Vuorinen, T. (2020) · Cellulose · doi:10.1007/s10570-020-03237-z · Cited by 27
“The energy consumption can be reduced significantly by chemical means, e.g. TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidation (Saito et al. 2006, 2007) and carboxymethylation (Wågberg et al. 2008), or by mild enzymatic hydrolysis of cellulose (Henriksson et al. 2007;…”
BackgroundCellulose nanofillers for food packaging
Olsson, R. T., Fogelström, L., Martínez‐Sanz, M., & Henriksson, M. (2011) · Elsevier eBooks · doi:10.1533/9780857092786.1.86 · Cited by 25
Petroudy, S. R. D., Rahmani, N., Garmaroody, E. R., Rudi, H., & Ramezani, O. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.05.212 · Cited by 24
Microfibrillated Cellulose Suspension and Its Electrorheology
Choi, K., Nam, J. D., Kwon, S. H., Choi, H. J., Islam, M. S., & Kao, N. (2019) · Polymers · doi:10.3390/polym11122119 · Cited by 24
“cotton, tunicin, wood pulp, and bacterial celluloses can be broken down to nanofibers with the oxidation of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical and mechanical treatment [10].”
BackgroundImani, M., Dimić‐Mišić, K., Tavakoli, M., Rojas, O. J., & Gane, P. A. C. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00918 · Cited by 24
Zhao, X., Chen, S., Wu, Z., Sheng, N., Zhang, M., Liang, Q., Han, Z., & Wang, H. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119133 · Cited by 24
Flexible and Transparent Bagasse Aerogels for Thermal Regulation Glazing
Zhao, P., Xie, Y. Q., Hu, S., Li, Y., Xue, X., Sun, N., Hu, T., Zhang, S. Q., & Wang, L. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c01600 · Cited by 25
Hillscher, L. M., Höfler, M. V., Gutmann, T., Lux, C., Clerkin, K. U., Schwall, G., Villforth, K., Schabel, S., & Biesalski, M. (2024) · Cellulose · doi:10.1007/s10570-024-05748-5 · Cited by 24
“…group distribution on the fibers (Saito et al. 2005a; Saito and Isogai 2006), the formation of cellulose microfibrils (Okita et al. 2010; Saito et al. 2006) and nanofibrils/-fibers (Hiraoki et al. 2015; Iso-gai et al. 2011; Okita et al. 2011; Saito et al. 2007; Shinoda et al. 2012), the…”
InfluentialEffect of drying pretreatment on the acetylation of nanofibrillated cellulose
Bogataj, V. Ž., Poljanšek, I., Oven, P., Škapin, A. S., & Hančič, A. (2015) · BioResources · doi:10.15376/biores.10.4.8148-8167 · Cited by 27
Phase Transitions in Cellulose Microfibril Dispersions by High-Energy Mechanical Deagglomeration
Veen, S. J., Kuijk, A., Versluis, P., Husken, H., & Velikov, K. P. (2014) · Langmuir · doi:10.1021/la502790n · Cited by 24
Structural Characterization and Modifications of Surface-oxidized Cellulose Nanofiber
Isogai, A. (2015) · Journal of the Japan Petroleum Institute · doi:10.1627/jpi.58.365 · Cited by 24
Self-citationSelf-Sustaining Cellulose Nanofiber Hydrogel Produced by Hydrothermal Gelation without Additives
Suenaga, S., & Osada, M. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00026 · Cited by 29
Highly Transparent, Flexible and Conductive CNF/AgNW Paper for Paper Electronics
Li, R., Zhang, K., & Chen, G. (2019) · Materials · doi:10.3390/ma12020322 · Cited by 24
Rheology of aqueous dispersions of Laponite and TEMPO-oxidized nanofibrillated cellulose
Šebenik, U., Lapasin, R., & Krajnc, M. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116330 · Cited by 24
Tanaka, R., Kashiwagi, Y., Okada, Y., & Inoue, T. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00943 · Cited by 24
Darder, M., Karan, A., del Real, G., & DeCoster, M. A. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110369 · Cited by 27
Lee, D., Oh, Y., Yoo, J., Yi, J. W., Um, M., & Park, T. (2020) · Cellulose · doi:10.1007/s10570-020-03410-4 · Cited by 25
An ultrastrong, reversible thermochromic film based on TEMPO-oxidized nanofibrillated cellulose
Liu, T., Liu, Z., Fang, Z., Zhang, J., Gong, S., & Li, J. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109191 · Cited by 24
Functional nanofibers for water purification
Ma, H., Chu, B., & Hsiao, B. S. (2012) · Elsevier eBooks · doi:10.1533/9780857095640.2.331 · Cited by 28
Alkali treatment of birch kraft pulp to enhance its TEMPO catalyzed oxidation with hypochlorite
Pönni, R., Pääkkönen, T., Nuopponen, M., Pere, J., & Vuorinen, T. (2014) · Cellulose · doi:10.1007/s10570-014-0278-3 · Cited by 32
“…T. Vuorinen e-mail: tapani.vuorinen@aalto.fi M. Nuopponen UPM, Tekniikantie 2 C, 02150 Espoo, Finland e-mail: markus.nuopponen@upm.com J. Pere VTT, Tietotie 2, P.O. Box 1000, 02044 Espoo, Finland e-mail: jaakko.pere@vtt.fi (Saito et al. 2006, 2007, 2009; Okita et al. 2009, 2010).”
BackgroundFujisawa, S., Togawa, E., & Hayashi, N. (2015) · Journal of Wood Science · doi:10.1007/s10086-015-1533-4 · Cited by 26
“lulose nanofibrils [13, 14] to achieve good dispersion in polymer matrices, such as poly(styrene) [15] and poly(Llactic acid) [16, 17].”
Saddique, A., & Cheong, I. W. (2021) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-021-0926-x · Cited by 23
Costa, V. L. D., & Simões, R. M. S. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-07249-x · Cited by 25
“The high carboxyl group content of TEMPO-oxidized cellulose fibrils helps in fiber wall disintegration by loosening the adhesion between microfibrils by electrostatic repulsions and improving aqueous dispersions stability [33].”
BackgroundNanoparticle release from anionic nanocellulose hydrogel matrix
Auvinen, V.-V., Laurén, P., Shen, B., Isokuortti, J., Durandin, N. A., Lajunen, T., Linko, V., & Laaksonen, T. (2022) · Cellulose · doi:10.1007/s10570-022-04875-1 · Cited by 24
Hierarchically Self-Assembled Nanofiber Films from Amylose-Grafted Carboxymethyl Cellulose
Hatanaka, D., Takemoto, Y., Yamamoto, K., & Kadokawa, J. (2014) · Fibers · doi:10.3390/fib2010034 · Cited by 23
“Conventional approaches to the production of cellulose nanofibers are mainly top-down procedures that break down the starting bulk materials from natural cellulose resources [6–8].”
BackgroundNechyporchuk, O., Pignon, F., do Rego, A. M. B., & Belgacem, M. N. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.09.030 · Cited by 24
Polysaccharide-based natural and synthetic nanocomposites
Bogdanova, O. I., & Чвалун, С. Н. (2016) · Polymer Science Series A · doi:10.1134/s0965545x16050047 · Cited by 23
Phosphorescence and fluorescence of fibrillar cellulose films
Grönroos, P., Bessonoff, M., Salminen, K., Paltakari, J., & Kulmala, S. (2018) · Nordic Pulp & Paper Research Journal · doi:10.1515/npprj-2018-3030 · Cited by 23
“And the nanofibrillar grade (CNF) was prepared with TEMPOoxidation and disintegration (Kitaoka et al. 1999, Saito et al. 2006, Fujisawa et al. 2011).”
MethodRecovery of Gold from Chloride Solution by TEMPO-Oxidized Cellulose Nanofiber Adsorbent
Jafari, S., Wilson, B. P., Hakalahti, M., Tammelin, T., Kontturi, E., Lundström, M., & Sillanpää, M. E. T. (2019) · Sustainability · doi:10.3390/su11051406 · Cited by 23
“It is reported that increasing inter-fibrillar electrostatic repulsion and reduction of the adhesion between the fibrils leads to the nanofibrillation of cellulose [22].”
BackgroundFully Biobased Highly Transparent Nanopaper with UV-Blocking Functionality
Hayden, D. R., Mohan, S., Imhof, A., & Velikov, K. P. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b00192 · Cited by 23
Pham, T. T. H., Vadanan, S. V., & Lim, S. (2020) · Cellulose · doi:10.1007/s10570-020-03284-6 · Cited by 23
Metadata
- Authors
- Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Corresponding author
- Nishiyama, Yoshiharu
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-05-03
- Volume
- 7
- Issue
- 6
- Pages
- 1687-1691
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2020375047
- Cited by
- 1,796
- References
- 21
- Citations by year
- 2026: 57 · 2025: 72 · 2024: 85 · 2023: 102 · 2022: 135 · 2021: 125 · 2020: 141 · 2019: 133 · 2018: 142 · 2017: 137 · 2016: 120 · 2015: 100 · 2014: 111 · 2013: 96 · 2012: 76
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Keywords
- TEMPO-mediated oxidation, cellulose microfibrils, homogeneous suspensions, cotton cellulose, tunicin, bacterial cellulose, oxidation degree, sodium hypochlorite, sonication, mechanical homogenization
- MeSH terms
- Catalysis, Cellulose, Cyclic N-Oxides, Oxidation-Reduction, Particle Size, Suspensions, Microfibrils
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.