Homogeneous Suspensions of Individualized Microfibrils from TEMPO-Catalyzed Oxidation of Native Cellulose
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Never-dried native celluloses (bleached sulfite wood pulp, cotton, tunicin, and bacterial cellulose) were disintegrated into individual microfibrils after oxidation mediated by the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical followed by a homogenizing mechanical treatment. When oxidized with 3.6 mmol of NaClO per gram of cellulose, almost the totality of sulfite wood pulp and cotton were readily disintegrated into long individual microfibrils by a treatment with a Waring Blendor, yielding transparent and highly viscous suspensions. When observed by transmission electron microscopy, the wood pulp and cotton microfibrils exhibited a regular width of 3-5 nm. Tunicin and bacterial cellulose could be disintegrated by sonication. A bulk degree of oxidation of about 0.2 per one anhydroglucose unit of cellulose was necessary for a smooth disintegration of sulfite wood pulp, whereas only small amounts of independent microfibrils were obtained at lower oxidation levels. This limiting degree of oxidation decreased in the following order: sulfite wood pulp > cotton > bacterial cellulose, tunicin.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [85]
Citations
Cites
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., & Isogai, A. (2004) · Biomacromolecules · doi:10.1021/bm0497769 · Cited by 1,292
Self-citationPolymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766
Liquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
The structure and mechanical properties of sheets prepared from bacterial cellulose
Yamanaka, S., Watanabe, K., Kitamura, N., Iguchi, M., Mitsuhashi, S., Nishi, Y., & Uryu, M. (1989) · Journal of Materials Science · doi:10.1007/bf01139032 · Cited by 612
Combined infrared and electron diffraction study of the polymorphism of native celluloses
Sugiyama, J., Persson, J., & Chanzy, H. (1991) · Macromolecules · doi:10.1021/ma00009a050 · Cited by 541
de Nooy, A. E. J., Besemer, A. C., & van Bekkum, H. (1995) · Carbohydrate Research · doi:10.1016/0008-6215(94)00343-e · Cited by 471
Preparation of Polyuronic Acid from Cellulose by TEMPO-mediated Oxidation
Isogai, A., & Kato, Y. (1998) · Cellulose · doi:10.1023/a:1009208603673 · Cited by 437
Self-citationCellulose Biosynthesis: Current Views and Evolving Concepts
SAXENA, I. M., & BROWN, R. M. (2005) · Annals of Botany · doi:10.1093/aob/mci155 · Cited by 424
Research works printed but not linked: 5
- Lepoutre P., 1974, TAPPI, 57, 87
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Saito T., 2005, TAPPI J., 4, 3
- Saito, T.; Okita, Y.; Nge, T. T.; Sugiyama, J.; Isogai, A. Carbohydr. Polym. , in press.
Cited by
Items 501–600 of 1,002
Biopolymer composite fibres composed of calcium alginate reinforced with nanocrystalline cellulose
Ma, X., Li, R., Zhao, X., Ji, Q., Xing, Y., Sunarso, J., & Xia, Y. (2017) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.02.021 · Cited by 72
Polymer Brushes on Cellulose Nanofibers: Modification, SI-ATRP, and Unexpected Degradation Processes
Morits, M., McKee, J. R., Majoinen, J., Malho, J., Houbenov, N., Seitsonen, J. J. T., Laine, J., Gröschel, A. H., & Ikkala, O. T. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00972 · Cited by 77
Wu, J., Zhu, W., Shi, X., Li, Q., Huang, C., Tian, Y., & Wang, S. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115999 · Cited by 72
Characterization of cellulose nanocrystals by current spectroscopic techniques
Dassanayake, R. S., Dissanayake, N., Trujillo, J. S. F., Abidi, N., Quitevis, E. L., Boggavarappu, K., & Thalangamaarachchige, V. D. (2021) · Applied Spectroscopy Reviews · doi:10.1080/05704928.2021.1951283 · Cited by 73
“ated by the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical and homogenizing mechanical treatment.([107]) Gallardo-S anchez et al.”
MethodMishra, S., Thirree, J., Manent, A.-S., Chabot, B., & Daneault, C. (2010) · BioResources · doi:10.15376/biores.6.1.121-143 · Cited by 84
““Ultrasound, TEMPO, nanocellulose,” BioResources 6(1), 121-143 122 Henriksson and Berglund 2007; Iwamoto et al. 2005, 2007; Janardhnan and Sain 2006; Nakagaito and Yano 2004; Paakko et al. 2007; Saito et al. 2005, 2006a,b; Taniguchi and Okamura 1998; Wang and Sain 2007).”
Sakakibara, K., Moriki, Y., Yano, H., & Tsujii, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13963 · Cited by 75
Shi, Q., Liu, D., Wang, Y., Zhao, Y., Yang, X., & Huang, J. D. (2019) · Small · doi:10.1002/smll.201901724 · Cited by 76
Nanofibrillar cellulose from Posidonia oceanica: Properties and morphological features
Bettaieb, F., Khiari, R., Dufresne, A., Mhenni, M. F., Putaux, J., & Boufi, S. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.12.060 · Cited by 75
Self-citationCooxidant-free TEMPO-mediated oxidation of highly crystalline nanocellulose in water
Carlsson, D. O., Lindh, J., Nyholm, L., Strømme, M., & Mihranyan, A. (2014) · RSC Advances · doi:10.1039/c4ra11182f · Cited by 74
Hakalahti, M., Salminen, A., Seppälä, J. V., Tammelin, T., & Hänninen, T. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.03.007 · Cited by 74
DMA analysis and wood bonding of PVAc latex reinforced with cellulose nanofibrils
López-Suevos, F., Eyholzer, C., Bordeanu, N., & Richter, K. (2010) · Cellulose · doi:10.1007/s10570-010-9396-8 · Cited by 75
“…or reactions with anhydrides) of the surface hydroxyl groups (Andresen et al. 2006; Araki et al. 2001; Goussé et al. 2004; Lasseuguette 2008; Saito et al. 2006; Sassi and Chanzy 1995; Stenstad et al. 2008), the hydrophilic nature of CNF makes them especially attractive for polar matrices…”
BackgroundFujisawa, S., Saito, T., Kimura, S., Iwata, T., & Isogai, A. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.10.021 · Cited by 72
Self-citationNguyen, H., Jo, Y., Cha, M., Cha, Y., Yoon, D. K., Sanandiya, N. D., Prajatelistia, E., Oh, D. X., & Hwang, D. S. (2016) · Polymers · doi:10.3390/polym8030102 · Cited by 71
“Carboxylation of cellulose fibrils by (2,2,6,6tetramethyl-piperidin-1-yl)oxyl (TEMPO), a catalyst for selective oxidization, is a facile chemical pretreatment method for physical disintegration of cellulose fibrils [7].”
BackgroundA Review of Hydrogel Application in Wastewater Purification
Alsaka, L., Alsaka, L., Altaee, A., Zaidi, S. M. J., Zhou, J., & Kazwini, T. (2025) · Separations · doi:10.3390/separations12020051 · Cited by 73
Effect of cationic polymethacrylates on the rheology and flocculation of microfibrillated cellulose
Karppinen, A., Vesterinen, A., Saarinen, T., Pietikäinen, P., & Seppälä, J. V. (2011) · Cellulose · doi:10.1007/s10570-011-9597-9 · Cited by 75
“Originally, Turbak et al. (1983) and Herrick et al. (1983) manufactured MFC solely by high shearing forces, but today, mild enzymatic hydrolysis (Pääkkö et al. 2007) or oxidation (Saito et al. 2006) are occasionally used prior to mechanical treatment.”
BackgroundMethodInfluentialHuang, C., Tu, C.-W., Lee, R., Yang, C., Hung, W.-C., & Lin, K. A. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.01.023 · Cited by 70
Interaction between water-soluble polysaccharides and native nanofibrillar cellulose thin films
Eronen, P., Junka, K., Laine, J., & Österberg, M. (2011) · BioResources · doi:10.15376/biores.6.4.4200-4217 · Cited by 82
“Numerous chemical ways for achieving this are known, such as acid hydrolysis, which yields short and rigid structural elements (Azizi Samir et al. 2005) or oxidation catalyzed by TEMPO, retaining the fibrillar structure (Bragd et al. 2004; Saito et al. 2006).”
BackgroundBleached and unbleached MFC nanobarriers: properties and hydrophobisation with hexamethyldisilazane
Chinga‐Carrasco, G., Kuznetsova, N. V., Garaeva, M., Leirset, I., Галиуллина, Г. Н., Kostochko, A. V., & Syverud, K. (2012) · Journal of Nanoparticle Research · doi:10.1007/s11051-012-1280-z · Cited by 71
“Production procedures of MFC include several pre-treatments, which produce MFC materials with varying chemical and structural properties (Saito et al. 2006; Pääkkö et al. 2007; Wågberg et al. 2008).”
BackgroundMethodMoreau, C., Villares, A., Capron, I., & Cathala, B. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.028 · Cited by 74
Microemulsion Systems for Fiber Deconstruction into Cellulose Nanofibrils
Carrillo, C. A., Laine, J., & Rojas, O. J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5067332 · Cited by 67
Petroudy, S. R. D., Kahagh, S. A., & Vatankhah, E. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117087 · Cited by 67
Spaic, M., Small, D. P., Cook, J. R., & Wan, W. (2014) · Cellulose · doi:10.1007/s10570-014-0174-x · Cited by 68
Dialdehyde cellulose microfibers generated from wood pulp by milling-induced periodate oxidation
Sirviö, J. A., Liimatainen, H., Niinimäki, J., & Hormi, O. E. O. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.054 · Cited by 70
Koga, H., Azetsu, A., Tokunaga, E., Saito, T., Isogai, A., & Kitaoka, T. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15661j · Cited by 73
Self-citationRaj, P., Mayahi, A., Lahtinen, P., Varanasi, S., Garnier, G., Martin, D. J., & Batchelor, W. J. (2016) · Cellulose · doi:10.1007/s10570-016-1039-2 · Cited by 68
“…of the microfibrillated cellulose (Henriksson et al. 2007) and TEMPO-mediated oxidation which allows for the selective conversion of C6 carboxylate groups, resulting in separation of nanofibres due to the repulsive forces set up between carboxylate groups (Saito and Isogai 2006; Saito et al. 2006).”
BackgroundYadav, C., Saini, A., & Maji, P. K. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.02.049 · Cited by 66
Lee, H., & Mani, S. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.04.044 · Cited by 66
Hou, M., Xu, M., & Li, B. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02683 · Cited by 66
Zhang, J., Liu, T., Liu, Z., & Wang, Q. (2019) · Polymer · doi:10.1016/j.polymer.2019.04.028 · Cited by 70
Pretreatment of lignocellulosic feedstocks for cellulose nanofibril production
Copenhaver, K., Li, K., Wang, L., Lamm, M. E., Zhao, X., Korey, M., Neivandt, D. J., Dixon, B., Sultana, S., Kelly, P. V., et al. (2022) · Cellulose · doi:10.1007/s10570-022-04580-z · Cited by 65
“In this work, never-dried cellulose feedstock was believed to be advantageous in producing TEMPO-CNF, as fibers form irreversible hydrogen bonding with one another upon drying (Saito et al. 2006).”
BackgroundNanocellulose-based hydrogels for drug delivery
Ai, Y., Lin, Z., Zhao, W., Cui, M., Qi, W. D., Huang, R., & Su, R. (2023) · Journal of Materials Chemistry B · doi:10.1039/d3tb00478c · Cited by 72
Molecularly thin nanoparticles from cellulose: isolation of sub-microfibrillar structures
Li, Q., & Renneckar, S. H. (2009) · Cellulose · doi:10.1007/s10570-009-9329-6 · Cited by 73
“Length distributions changed as a function of sonication time, with the average fibril length declining from 580 to 260 nm for the 30 min and 4 h samples, respectively (Fig. 3). This data shows that there are micron sized fibrils present at low sonication times, confirming TEM observations based on blended oxidized ce…”
BackgroundMethodLindström, T., & Aulin, C. (2014) · Scandinavian Journal of Forest Research · doi:10.1080/02827581.2014.928365 · Cited by 74
“Today, there exist several pre-treatment routes to enhance the delamination of pulp fibres, such as the introduction of charges by carboxymethylation (Wågberg et al. 2008), TEMPO-mediated oxidation (Saito et al. 2006, 2007), and cationisation (Aulin, Johansson et al. 2010; Olszewska et al. 2011).”
BackgroundLiu, H., Wang, D., Shang, S., & Song, Z. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.07.019 · Cited by 68
TEMPO-oxidized cellulose nanofiber films: effect of surface morphology on water resistance
Rodionova, G., Eriksen, Ø., & Gregersen, Ø. W. (2012) · Cellulose · doi:10.1007/s10570-012-9721-5 · Cited by 69
“A corresponding reaction procedure has previously been described by Saito et al. (2006).”
BackgroundMethodA Nanocellulose Polypyrrole Composite Based on Tunicate Cellulose
Zhang, D., Zhang, Q., Gao, X., & Piao, G. (2013) · International Journal of Polymer Science · doi:10.1155/2013/175609 · Cited by 71
Lignocellulosic Films: Preparation, Properties, and Applications
Du, H., Liu, K., Xu, T., Xu, C., Lin, M., Fang, Z., Kim, S., Seo, J., Chen, J., Ma, H., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.5c00267 · Cited by 73
Okahisa, Y., Abe, K., Nogi, M., Nakagaito, A. N., Nakatani, T., & Yano, H. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.05.006 · Cited by 67
Development, application and commercialization of transparent paper
Fang, Z., Zhu, H., Preston, C., & Hu, L. (2014) · Translational Materials Research · doi:10.1088/2053-1613/1/1/015004 · Cited by 67
Rheology of semi-dilute suspensions of carboxylated cellulose nanofibrils
Jowkarderis, L., & van de Ven, T. G. M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.01.067 · Cited by 67
Composite films from spruce galactoglucomannans with microfibrillated spruce wood cellulose
Mikkonen, K. S., Stevanic, J. S., Joly, C., Dole, P., Pirkkalainen, K., Serimaa, R. E., Salmén, L., & Tenkanen, M. (2011) · Cellulose · doi:10.1007/s10570-011-9524-0 · Cited by 64
“Prior to homogenization, the fibers can be treated by carboxymethylation to improve the liberation and uniformity of microfibrils (Wa ˚gberg et al. 2008) or by TEMPO oxidation ( Saito et al. 2006 ) or enzymes (Pa ¨akko ¨ et al. 2007) to obtain higher aspect ratio of microfibrils using lower energy input.”
MethodQin, Y., Qiu, X., & Zhu, J. (2016) · Scientific Reports · doi:10.1038/srep35602 · Cited by 65
Yu, J., Zhu, Y., Ma, H., Liu, L., Hu, Y., Xu, J., Wang, Z., & Fan, Y. (2019) · Cellulose · doi:10.1007/s10570-019-02518-6 · Cited by 66
Wei, J., Zhou, Y., Lv, Y., Wang, J., Jia, C., Liu, J., Zhang, X., Sun, J., & Shao, Z. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b01822 · Cited by 65
Zhu, G., Chen, Z., Wu, B., & Lin, N. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111580 · Cited by 64
Yan, Y., Amer, H., Rosenau, T., Zollfrank, C., Dörrstein, J., Jobst, C., Zimmermann, T., Kečkéš, J., Veigel, S., Gindl‐Altmutter, W., et al. (2016) · Cellulose · doi:10.1007/s10570-016-0887-0 · Cited by 65
“2008a, b), and TEMPO oxidation (Saito et al. 2006; Fukuzumi et al. 2009) are mentioned as important examples.”
BackgroundZarna, C., Opedal, M. T., Echtermeyer, A. T., & Chinga‐Carrasco, G. (2021) · Composites Part C Open Access · doi:10.1016/j.jcomc.2021.100171 · Cited by 75
Physical properties of bacterial cellulose aqueous suspensions treated by high pressure homogenizer
Lin, D., Li, R., López-Sánchez, P., & Li, Z. (2014) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2014.10.019 · Cited by 67
Liu, X., Jiang, Y. P., Song, X., Qin, C., Wang, S., & Li, K. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.12.071 · Cited by 65
Mechanistic Study of Interfacial Modification for Stable Zn Anode Based on a Thin Separator
Li, Q., Yan, B., Wang, D., Yang, Q., Huang, Z., Fan, J., Dai, M., Chen, W., & Zhi, C. (2022) · Small · doi:10.1002/smll.202201045 · Cited by 66
Bogataj, V. Ž., Fabjan, E. Š., Kasunič, M., Korošec, R. C., Hančič, A., Oven, P., Perše, L. S., & Poljanšek, I. (2014) · Holzforschung · doi:10.1515/hf-2013-0132 · Cited by 69
“2007) or chemical (Saito et al. 2006; Okita et al. 2009) pretreatments applied to the fibers before severe fibrillation steps facilitate the production of homogenous MFC, containing mainly fragments at the nano level (Chinga-Carrasco 2011).”
BackgroundSu, Y., Burger, C. P., Hsiao, B. S., & Chu, B. (2014) · Journal of Applied Crystallography · doi:10.1107/s1600576714005020 · Cited by 63
“During TEMPO-mediated oxidation, the hydroxyl groups at the C6 positions of the cellulose molecules can be regioselectively converted into carboxylate groups (Saito et al., 2006; Isogai et al., 2011), leading to a negatively charged surface.”
BackgroundExploring the Nature of Cellulose Microfibrils
Su, Y., Burger, C. P., Ma, H., Chu, B., & Hsiao, B. S. (2015) · Biomacromolecules · doi:10.1021/bm501897z · Cited by 65
Cross-linking cellulose nanofibrils for potential elastic cryo-structured gels
Syverud, K., Kirsebom, H., Hajizadeh, S., & Chinga‐Carrasco, G. (2011) · Nanoscale Research Letters · doi:10.1186/1556-276x-6-626 · Cited by 62
“3 mmol/g) [11], which can react easily with amines [12].”
BackgroundMicromechanics of TEMPO-Oxidized Fibrillated Cellulose Composites
Bulota, M., Tanpichai, S., Hughes, M., & Eichhorn, S. J. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am201399q · Cited by 62
On the nanofibrillation of corn husks and oat hulls fibres
Valdebenito, F., Pereira, M. Á., Ciudad, G., Azócar, L., Briones, R., & Chinga‐Carrasco, G. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.11.006 · Cited by 63
Campodoni, E., Heggset, E. B., Rashad, A., Ramírez‐Rodríguez, G. B., Mustafa, K., Syverud, K., Tampieri, A., & Sandri, M. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.10.026 · Cited by 63
Chook, S. W., Chia, C. H., Chan, C. H., Chin, S. X., Zakaria, S., Sajab, M. S., & Huang, N. M. (2015) · RSC Advances · doi:10.1039/c5ra18806g · Cited by 61
Kose, R., Sunagawa, N., Yoshida, M., & Tajima, K. (2013) · Cellulose · doi:10.1007/s10570-013-0050-0 · Cited by 68
“, a top-down process) (Abe and Yano 2009; Saito et al. 2006), and is obtained as uniform”
BackgroundRuiz-Palomero, C., Soriano, M. L., & Valcárcel, M. (2015) · The Analyst · doi:10.1039/c4an01967a · Cited by 61
Hierarchical Assembly of Nanocellulose‐Based Filaments by Interfacial Complexation
Zhang, K., & Liimatainen, H. (2018) · Small · doi:10.1002/smll.201801937 · Cited by 61
The use of biobased nanofibres in composites
Bandyopadhyay‐Ghosh, S., Ghosh, S. B., & Sain, M. M. (2014) · Elsevier eBooks · doi:10.1533/9781782421276.5.571 · Cited by 76
Formation of shear thinning gels from partially oxidised cellulose nanofibrils
Crawford, R. J., Edler, K. J., Lindhoud, S., Scott, J. L., & Unali, G. (2012) · Green Chemistry · doi:10.1039/c2gc16302k · Cited by 62
Nanocellulose aerogel membranes for optimal electrolyte filling in dye solar cells
Miettunen, K., Vapaavuori, J., Tiihonen, A., Poskela, A., Lahtinen, P., Halme, J., & Lund, P. D. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.05.013 · Cited by 64
Wen, Y., Yuan, Z., Qu, J., Wang, C., & Wang, A. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06028 · Cited by 63
Ma, H., Yu, J., Liu, L., & Fan, Y. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118008 · Cited by 63
Zhang, Z., Sèbe, G., Hou, Y., Wang, J., Huang, J. T., & Zhou, G. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51458 · Cited by 63
Surface carboxylation of porous regenerated cellulose beads by 4-acetamide-TEMPO/NaClO/NaClO2 system
Hirota, M., Tamura, N., Saito, T., & Isogai, A. (2009) · Cellulose · doi:10.1007/s10570-009-9296-y · Cited by 69
“From these aspects, porous CM-cellulose beads are advantageous, and have better performance in low flow resistance and efficient separation capability because of large surface areas and homogeneous spherical shapes with narrow size distributions ( Boeden et al. 1991; Lin et al. 1992).”
BackgroundSelf-citationSustainable Chitosan-Dialdehyde Cellulose Nanocrystal Film
Gao, C., Wang, S., Liu, B., Yao, S., Dai, Y., Zhou, L., Qin, C., & Fatehi, P. (2021) · Materials · doi:10.3390/ma14195851 · Cited by 63
Sofiah, A. G. N., Pasupuleti, J., Samykano, M., Kadirgama, K., Koh, S. P., Kiong, T. S., Pandey, A. K., Yaw, C. T., & Natarajan, S. K. (2023) · Polymers · doi:10.3390/polym15143044 · Cited by 66
“[101] introduced the approach of TEMPO radicals as an oxidative pretreatment before mechanical treatment takes place.”
BackgroundOptical methods for the quantification of the fibrillation degree of bleached MFC materials
Chinga‐Carrasco, G. (2013) · Micron · doi:10.1016/j.micron.2013.02.005 · Cited by 60
Structural modification of bacterial cellulose fibrils under ultrasonic irradiation
Paximada, P., Dimitrakopoulou, E. A., Tsouko, E., Koutinas, A., Fasseas, C., & Mandala, I. G. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.04.125 · Cited by 62
Lê, H. Q., Dimić‐Mišić, K., Johansson, L., Maloney, T. C., & Sixta, H. (2017) · Cellulose · doi:10.1007/s10570-017-1602-5 · Cited by 59
“…on NFC, the smallest unit of plant fibers, which is a bundle of entangled cellulose chains consisting of alternating amorphous and crystalline domains, with the typical width of 5–20 nm and the length of several hundred nanometers (Klemm et al. 2005; Saito et al. 2006; Sakurada et al. 1962).”
BackgroundPyrgiotakis, G., Luu, W. T., Zhang, Z., Vaze, N., DeLoid, G. M., Rubio, L., Graham, W. A., Bell, D. C., Bousfield, D. W., & Demokritou, P. (2018) · Cellulose · doi:10.1007/s10570-018-1718-2 · Cited by 59
“…modification of cellulose prior to nanocellulose fabrication is the TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical) (Saito and Isogai 2004; Saito et al. 2006a, b, 2007) that has a double effect on the nanocellulose: (1) reduces the energy required for milling by a factor of a * 100…”
BackgroundSmith, E. D., Hendren, K. D., Haag, J. V., Foster, E. J., & Martin, S. M. (2019) · Nanomaterials · doi:10.3390/nano9010125 · Cited by 60
“The TEMPO-mediated oxidation was performed on as-received CNCs using a well-known method [35], generating a 5.”
MethodThe surface chemistry of a nanocellulose drug carrier unravelled by MAS-DNP
Kumar, A., Durand, H., Zeno, E., Balsollier, C., Watbled, B., Sillard, C., Fort, S., Baussanne, I., Belgacem, M. N., Lee, D. J., et al. (2020) · Chemical Science · doi:10.1039/c9sc06312a · Cited by 59
Yang, W., Xiao, P., Ni, F., Zhang, C., Gu, J., Kuo, S., Liu, Q., & Chen, T. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107180 · Cited by 58
Toward Industrially Feasible Methods for Following the Process of Manufacturing Cellulose Nanofibers
Moser, C., Lindström, M. E., & Henriksson, G. (2015) · BioResources · doi:10.15376/biores.10.2.2360-2375 · Cited by 61
“One approach to increasing charge density is catalytic oxidation with 2,2,6,6- tetramethylpiperidine-1-oxyl radicals (TEMPO) (Saito et al. 2006, 2007).”
BackgroundProperties of poly(acrylamide)/TEMPO-oxidized cellulose nanofibril composite films
Kurihara, T., & Isogai, A. (2013) · Cellulose · doi:10.1007/s10570-013-0124-z · Cited by 61
“…2,2,6,6-tetramethylpiperidine1-oxy radical (TEMPO)-mediated oxidation as a pretreatment to convert wood cellulose fibers to completely individualized TEMPO-oxidized cellulose nanofibrils (TOCNs) with homogeneous widths of &3 nm dispersed in water (Saito et al. 2006, 2007; Isogai et al. 2011).”
BackgroundSelf-citationTryptophan-based peptides grafted onto oxidized nanocellulose
Barazzouk, S., & Daneault, C. (2011) · Cellulose · doi:10.1007/s10570-011-9633-9 · Cited by 60
“In fact, Saito et al. (2006, 2007) have demonstrated that the yield of oxidized cellulose in the supernatant increases by increasing carboxylate content of oxidized cellulose, and by increasing the time of stirring of oxidized cellulose/water slurries.”
BackgroundMethodInfluentialBenkaddour, A., Journoux-Lapp, C., Jradi, K., Robert, S., & Daneault, C. (2014) · Journal of Materials Science · doi:10.1007/s10853-013-7989-y · Cited by 64
“In the first step, the oxidation of native cellulose fibers was carried out by the TEMPO-mediated oxidation system [24] and conducted in a 45L flow-through sonoreactor (semicontinuous mode) with a nominal input power capacity of 2000 W (262 W/L, 12300 W/m(2)), according to the procedure described [25, 26].”
MethodUddin, K. M. A., Orelma, H., Mohammadi, P., Borghei, M., Laine, J., Linder, M. B., & Rojas, O. J. (2017) · Cellulose · doi:10.1007/s10570-017-1311-0 · Cited by 62
“One very efficient way for modifying surface hydroxyl groups is oxidation with TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl) catalyst, which results in the formation of carboxyl groups on the surface of the nanofibrillated cellulose (Saito et al. 2006, 2007).”
Preparation and characterization of amidated derivatives of alginic acid
Taubner, T., Marounek, M., & Synytsya, A. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.05.070 · Cited by 59
Trovagunta, R., Zou, T., Österberg, M., Kelley, S. S., & Lavoine, N. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117480 · Cited by 59
Wang, Z., Zhang, W., Yu, J., Zhang, L., Liu, L., Zhou, X., Huang, C., & Fan, Y. (2018) · Cellulose · doi:10.1007/s10570-018-2121-8 · Cited by 57
“successfully prepared cellulose nanofibers with a diameter of 3–4 nm and a micronscale length from natural plant cellulose by a TEMPOmediated oxidation method (Saito et al. 2006; Isogai et al. 2018).”
MethodValenzuela, S. V., Valls, C., Schink, V., Sánchez, D., Roncero, M. B., Díaz, P., Martínez, J., & Pastor, F. I. J. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.076 · Cited by 58
Nadeem, H., Athar, M., Dehghani, M., Garnier, G., & Batchelor, W. J. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155654 · Cited by 58
Jradi, K., Bideau, B., Chabot, B., & Daneault, C. (2012) · Journal of Materials Science · doi:10.1007/s10853-011-6226-9 · Cited by 57
Wu, B., Geng, B., Chen, Y., Liu, H., Li, G., & Wu, Q. (2017) · Frontiers of Chemical Science and Engineering · doi:10.1007/s11705-017-1673-8 · Cited by 60
“TO-CNs were prepared from the bamboo bleached kraft pulp using the TEMPO/NaBr/NaClOoxidation system in water at pH = 10 and room temperature according to the previously reported method [8,13,14].”
MethodXia, J., Zhang, Z., Liu, W., Li, V. C. F., Cao, Y., Zhang, W., & Deng, Y. (2018) · Cellulose · doi:10.1007/s10570-018-1843-y · Cited by 57
Deconstruction of cellulosic fibers to fibrils based on enzymatic pretreatment
Wang, S., Gao, W., Chen, K., Xiang, Z., Zeng, J., Wang, B., & Xu, J. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.07.067 · Cited by 57
Liu, Y., Zhang, S., Lin, R. Z., Li, L., Li, M., Du, M., & Tang, R. (2021) · Green Chemistry · doi:10.1039/d1gc02657g · Cited by 57
Sirviö, J. A., Hasa, T., Ahola, J., Liimatainen, H., Niinimäki, J., & Hormi, O. E. O. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.06.090 · Cited by 57
“Frequently used 51 chemical pre-treatments in NFC production are TEMPO oxidation (Saito et al., 2006) and 52 carboxymethylation of cellulose (Wågberg et al., 2008).”
MethodXu, J., Deng, X., Dong, Y., Zhou, Z., Zhang, Y., Yu, J., Cai, J., & Zhang, Y. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116694 · Cited by 56
Subbotina, E., Ram, F., Двинских, С. В., Berglund, L. A., & Olsén, P. (2022) · Nature Communications · doi:10.1038/s41467-022-34697-5 · Cited by 63
Zhang, Z., Kong, Y., Gao, J., Han, X. D., Lian, Z., Liu, J., Wang, W., & Yang, X. (2024) · Nanoscale · doi:10.1039/d3nr06126d · Cited by 62
Hietala, M., Rollo, P., Kekäläinen, K., & Oksman, K. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39981 · Cited by 58
Chinga‐Carrasco, G., & Syverud, K. (2009) · Journal of Nanoparticle Research · doi:10.1007/s11051-009-9710-2 · Cited by 60
“Saito et al. 2006; Pa ¨akko ¨ et al. 2007; Abe et al. 2007; Eriksen et al. 2008).”
Carbon aerogels by pyrolysis of TEMPO-oxidized cellulose
Zhang, S., Feng, J., Feng, J., Jiang, Y., & Ding, F. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.01.252 · Cited by 58
Jiang, J., Chen, H., Liu, L., Yu, J., Fan, Y., Saito, T., & Isogai, A. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c05291 · Cited by 59
Self-citation
Metadata
- Authors
- Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Corresponding author
- Nishiyama, Yoshiharu
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-05-03
- Volume
- 7
- Issue
- 6
- Pages
- 1687-1691
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2020375047
- Cited by
- 1,796
- References
- 21
- Citations by year
- 2026: 57 · 2025: 72 · 2024: 85 · 2023: 102 · 2022: 135 · 2021: 125 · 2020: 141 · 2019: 133 · 2018: 142 · 2017: 137 · 2016: 120 · 2015: 100 · 2014: 111 · 2013: 96 · 2012: 76
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Keywords
- TEMPO-mediated oxidation, cellulose microfibrils, homogeneous suspensions, cotton cellulose, tunicin, bacterial cellulose, oxidation degree, sodium hypochlorite, sonication, mechanical homogenization
- MeSH terms
- Catalysis, Cellulose, Cyclic N-Oxides, Oxidation-Reduction, Particle Size, Suspensions, Microfibrils
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.