Homogeneous Suspensions of Individualized Microfibrils from TEMPO-Catalyzed Oxidation of Native Cellulose
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Never-dried native celluloses (bleached sulfite wood pulp, cotton, tunicin, and bacterial cellulose) were disintegrated into individual microfibrils after oxidation mediated by the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical followed by a homogenizing mechanical treatment. When oxidized with 3.6 mmol of NaClO per gram of cellulose, almost the totality of sulfite wood pulp and cotton were readily disintegrated into long individual microfibrils by a treatment with a Waring Blendor, yielding transparent and highly viscous suspensions. When observed by transmission electron microscopy, the wood pulp and cotton microfibrils exhibited a regular width of 3-5 nm. Tunicin and bacterial cellulose could be disintegrated by sonication. A bulk degree of oxidation of about 0.2 per one anhydroglucose unit of cellulose was necessary for a smooth disintegration of sulfite wood pulp, whereas only small amounts of independent microfibrils were obtained at lower oxidation levels. This limiting degree of oxidation decreased in the following order: sulfite wood pulp > cotton > bacterial cellulose, tunicin.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [85]
Citations
Cites
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., & Isogai, A. (2004) · Biomacromolecules · doi:10.1021/bm0497769 · Cited by 1,292
Self-citationPolymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766
Liquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
The structure and mechanical properties of sheets prepared from bacterial cellulose
Yamanaka, S., Watanabe, K., Kitamura, N., Iguchi, M., Mitsuhashi, S., Nishi, Y., & Uryu, M. (1989) · Journal of Materials Science · doi:10.1007/bf01139032 · Cited by 612
Combined infrared and electron diffraction study of the polymorphism of native celluloses
Sugiyama, J., Persson, J., & Chanzy, H. (1991) · Macromolecules · doi:10.1021/ma00009a050 · Cited by 541
de Nooy, A. E. J., Besemer, A. C., & van Bekkum, H. (1995) · Carbohydrate Research · doi:10.1016/0008-6215(94)00343-e · Cited by 471
Preparation of Polyuronic Acid from Cellulose by TEMPO-mediated Oxidation
Isogai, A., & Kato, Y. (1998) · Cellulose · doi:10.1023/a:1009208603673 · Cited by 437
Self-citationCellulose Biosynthesis: Current Views and Evolving Concepts
SAXENA, I. M., & BROWN, R. M. (2005) · Annals of Botany · doi:10.1093/aob/mci155 · Cited by 424
Research works printed but not linked: 5
- Lepoutre P., 1974, TAPPI, 57, 87
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Saito T., 2005, TAPPI J., 4, 3
- Saito, T.; Okita, Y.; Nge, T. T.; Sugiyama, J.; Isogai, A. Carbohydr. Polym. , in press.
Cited by
Items 401–500 of 1,002
Lead removal from water using carboxycellulose nanofibers prepared by nitro-oxidation method
Sharma, P. R., Chattopadhyay, A., Zhan, C., Sharma, S. K., Geng, L., & Hsiao, B. S. (2018) · Cellulose · doi:10.1007/s10570-018-1659-9 · Cited by 92
Lytic polysaccharide monooxygenases (LPMOs) facilitate cellulose nanofibrils production
Moreau, C., Tapin‐Lingua, S., Grisel, S., Herpoël‐Gimbert, I., Gall, S. L., Meyer, V., Petit‐Conil, M., Berrin, J., Cathala, B., & Villares, A. (2019) · Biotechnology for Biofuels · doi:10.1186/s13068-019-1501-0 · Cited by 97
Zhong, L. X., Fu, S. Y., Zhou, X. S., & Zhan, H. Y. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.11.010 · Cited by 100
Nanofibrillated cellulose/carboxymethyl cellulose composite with improved wet strength
Pahimanolis, N., Salminen, A., Penttilä, P. A., Korhonen, J. T., Johansson, L., Ruokolainen, J., Serimaa, R. E., & Seppälä, J. V. (2013) · Cellulose · doi:10.1007/s10570-013-9923-5 · Cited by 92
“…or microfibrillated cellulose can be produced by mechanical disintegration of pulp fibers though a process first described by Turbak et al. (1983) and Herrick et al. (1983) and the process was further developed with oxidation or enzymatic pretreatments (Saito et al. 2006; Pääkkö et al. 2007).”
BackgroundHassan, M. L., Hassan, E. A., & Oksman, K. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4992-4 · Cited by 94
Exploring Large Ductility in Cellulose Nanopaper Combining High Toughness and Strength
Chen, F., Xiang, W., Sawada, D., Bai, L., Hummel, M., Sixta, H., & Budtova, T. (2020) · ACS Nano · doi:10.1021/acsnano.0c02302 · Cited by 90
Wang, Y., Liu, H., Ji, X., Wang, Q., Tian, Z., & Fatehi, P. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.125227 · Cited by 98
Plackett, D., Anturi, H., Hedenqvist, M. S., Ankerfors, M., Gällstedt, M., Lindström, T., & Siró, I. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32254 · Cited by 96
Nanofibrillated cellulose surface grafting in ionic liquid
Missoum, K., Belgacem, M. N., Barnes, J., Brochier-Salon, M.-C., & Bras, J. (2012) · Soft Matter · doi:10.1039/c2sm25691f · Cited by 93
A xylanase-aided enzymatic pretreatment facilitates cellulose nanofibrillation
Long, L., Tian, D., Hu, J., Wang, F., & Saddler, J. N. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.07.037 · Cited by 93
Chen, Y., Geng, B., Ru, J., Tong, C., Liu, H., & Chen, J. (2017) · Cellulose · doi:10.1007/s10570-017-1478-4 · Cited by 93
“Saito et al. (2006) applied TEMPO-mediated oxidation to various sources of native cellulose.”
BackgroundLi, G., Tian, X., Xu, X., Zhou, C., Wu, J., Li, Q., Zhang, L., Yang, F., & Li, Y. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.12.001 · Cited by 89
Effect of lignin and hemicellulose on the properties of lignocellulose nanofibril suspensions
Albornoz-Palma, G., Ching, D., Valerio, O., Mendonça, R. T., & Pereira, M. Á. (2020) · Cellulose · doi:10.1007/s10570-020-03304-5 · Cited by 91
Cellulose Nanocrystals (CNCs) and Cellulose Nanofibers (CNFs) as Adsorbents of Heavy Metal Ions
Kurniawan, T. W., Sulistyarti, H., Rumhayati, B., & Sabarudin, A. (2023) · Journal of Chemistry · doi:10.1155/2023/5037027 · Cited by 103
Aerogels Derived from Polymer Nanofibers and Their Applications
Qian, Z., Wang, Z., Zhao, N., & Xu, J. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700724 · Cited by 89
Hai, L., Choi, E. S., Zhai, L., Panicker, P. S., & Kim, J. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.12.124 · Cited by 88
Nanocellulose from recycled indigo-dyed denim fabric and its application in composite films
Zhong, T., Dhandapani, R., Liang, D., Wang, J., Wolcott, M. P., Fossen, D. V., & Liu, H. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116283 · Cited by 91
Cellulose nanofibres by sonocatalysed-TEMPO-oxidation
Rattaz, A., Mishra, S., Chabot, B., & Daneault, C. (2011) · Cellulose · doi:10.1007/s10570-011-9529-8 · Cited by 100
“These dimensions of individualized nanofibres were similar to those reported previously ( Saito et al. 2006, 2007 ) and shown in Fig. 6. The small width makes the dispersion almost transparent.”
MethodResultPreparation of nanofibrillar carbon from chitin nanofibers
Nogi, M., Kurosaki, F., Yano, H., & Takano, M. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.04.006 · Cited by 88
Che, X., Zhang, W., Long, L., Zhang, X., Pei, D., Li, M., & Li, C. (2022) · ACS Nano · doi:10.1021/acsnano.1c10836 · Cited by 88
Wang, Z., Ma, H., Hsiao, B. S., & Chu, B. (2013) · Polymer · doi:10.1016/j.polymer.2013.10.049 · Cited by 87
Li, J., Zhou, M., Cheng, G., Cheng, F., Lin, Y. H., & Zhu, P.-X. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.01.051 · Cited by 89
Ly, M., & Mekonnen, T. H. (2019) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2019.12.014 · Cited by 86
Recent advances in wood-based electrode materials for supercapacitors
Wei, S. M., Wan, C., & Wu, Y. (2023) · Green Chemistry · doi:10.1039/d2gc04271a · Cited by 88
Sajab, M. S., Chia, C. H., Chan, C. H., Zakaria, S., Kaco, H., Chook, S. W., Chin, S. X., & Noor, A. M. (2016) · RSC Advances · doi:10.1039/c5ra26193g · Cited by 86
Yaich, A. I., Edlund, U., & Albertsson, A. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00841 · Cited by 90
Nanocellulose Xerogels With High Porosities and Large Specific Surface Areas
Yamasaki, S., Sakuma, W., Yasui, H., Daicho, K., Saito, T., Fujisawa, S., Isogai, A., & Kanamori, K. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00316 · Cited by 86
“Preparation of CNFs CNF dispersions were prepared according to our previous reports (Saito et al., 2006; Sakai et al., 2016).”
MethodSelf-citationThe interaction of wood nanocellulose dressings and the wound pathogen P. aeruginosa
Jack, A. A., Nordli, H. R., Powell, L. C., Powell, K. A., Kishnani, H., Johnsen, P. O., Pukstad, B. S., Thomas, D. W., Chinga‐Carrasco, G., & Hill, K. E. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.11.080 · Cited by 88
“TEMPO-70 mediated oxidation is one of the most applied procedures for CNF production, leading to the introduction of carboxyl groups in the C6 position and small numbers of aldehyde groups (Saito & Isogai, 2004; Saito et al., 2006).”
Yang, W., Bian, H., Jiao, L., Wu, W., Deng, Y., & Dai, H. (2017) · RSC Advances · doi:10.1039/c7ra05009g · Cited by 87
Kobayashi, Y., Saito, T., & Isogai, A. (2014) · Angewandte Chemie · doi:10.1002/ange.201405123 · Cited by 85
Self-citationSynthesis and Catalytic Features of Hybrid Metal Nanoparticles Supported on Cellulose Nanofibers
Azetsu, A., Koga, H., Isogai, A., & Kitaoka, T. (2011) · Catalysts · doi:10.3390/catal1010083 · Cited by 90
“Recently, it has been reported that 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) catalyzes the selective oxidation of the C6 primary hydroxyl group of cellulose to a carboxylate, which is only present on the surfaces of each crystalline cellulose nanofibril under mild aqueous conditions [40].”
BackgroundSelf-citationRenewable catalyst with Cu nanoparticles embedded into cellulose nano-fiber film
Bendi, R., & Imae, T. (2013) · RSC Advances · doi:10.1039/c3ra42689k · Cited by 88
Reusable photocatalytic titanium dioxide–cellulose nanofiber films
Snyder, A., Bo, Z., Moon, R. J., Rochet, J., & Stanciu, L. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.02.035 · Cited by 88
Enhancement of the nanofibrillation of birch cellulose pretreated with natural deep eutectic solvent
Hong, S., Yang, Y., Li, P., Zhang, K., Lian, H., & Liimatainen, H. (2020) · Industrial Crops and Products · doi:10.1016/j.indcrop.2020.112677 · Cited by 87
Shan, C., Che, M., Cholewinski, A., Kunihiro, J., Yim, E. K. F., Su, R., & Zhao, B. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138256 · Cited by 84
Preparation and Surface Functionalization of Carboxylated Cellulose Nanocrystals
Lam, E., & Hemraz, U. D. (2021) · Nanomaterials · doi:10.3390/nano11071641 · Cited by 91
TEMPO-oxidized cellulose nanofibril/poly(vinyl alcohol) composite drawn fibers
Endo, R., Saito, T., & Isogai, A. (2012) · Polymer · doi:10.1016/j.polymer.2012.12.035 · Cited by 88
Self-citationImprovement of nanodispersibility of oven-dried TEMPO-oxidized celluloses in water
Takaichi, S., Saito, T., Tanaka, R., & Isogai, A. (2014) · Cellulose · doi:10.1007/s10570-014-0444-7 · Cited by 89
Self-citationPetroudy, S. R. D., Ranjbar, J., & Garmaroody, E. R. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.06.008 · Cited by 85
Jonasson, S., Bünder, A., Niittylä, T., & Oksman, K. (2019) · Cellulose · doi:10.1007/s10570-019-02754-w · Cited by 85
Preparation of ultrastrength nanopapers using cellulose nanofibrils
Chun, S., Lee, S.-Y., Doh, G.-H., Lee, S. I., & Kim, J. H. (2011) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2010.10.022 · Cited by 88
Puangsin, B., Yang, Q., Saito, T., & Isogai, A. (2013) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2013.04.016 · Cited by 88
Self-citationMicrofibrillated cellulose from bamboo pulp and its properties
Zhang, J., Song, H., Lin, L., Zhuang, J., Pang, C., & Liu, S. (2010) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2010.06.013 · Cited by 87
Cellulose nanofibril reinforced composite electrolytes for lithium ion battery applications
Willgert, M., Leijonmarck, S., Lindbergh, G., Malmström, E., & Johansson, M. K. G. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01139b · Cited by 83
Kang, H., Liu, R., & Huang, Y. P. (2016) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201500493 · Cited by 87
Electrochemical Alcohol Oxidation Mediated by TEMPO‐like Nitroxyl Radicals
Ciriminna, R., Ghahremani, M., Karimi, B., & Pagliaro, M. (2017) · ChemistryOpen · doi:10.1002/open.201600086 · Cited by 88
An investigation of Pseudomonas aeruginosa biofilm growth on novel nanocellulose fibre dressings
Powell, L. C., Khan, S. S., Chinga‐Carrasco, G., Wright, C. J., Hill, K. E., & Thomas, D. W. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.10.024 · Cited by 81
Torres-Rendón, J. G., Köpf, M., Gehlen, D. B., Blaeser, A., Fischer, H., Laporte, L. D., & Walther, A. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.5b01593 · Cited by 82
Ovalle-Serrano, S. A., Jaimes, F. N. G., Blanco‐Tirado, C., & Combariza, M. Y. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.02.031 · Cited by 89
Enzymatic treatment processes for the production of cellulose nanomaterials: A review
Tong, X., He, Z., Zheng, L., Pande, H., & Ni, Y. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.120199 · Cited by 87
Berroci, M., Vallejo, C., & Lizundia, E. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c04417 · Cited by 86
Chinga‐Carrasco, G., Yu, Y., & Diserud, O. H. (2011) · Microscopy and Microanalysis · doi:10.1017/s1431927611000444 · Cited by 80
“Several pathways have been proposed for releasing the nanofibrils from the fiber wall structure at relatively large quantities ~Turbak et al., 1983; Saito et al., 2006; Pääkkö et al., 2007; Eriksen et al., 2008; Zimmermann et al., 2010!.”
BackgroundMethodBashar, M. M., Zhu, H., Yamamoto, S., & Mitsuishi, M. (2019) · Cellulose · doi:10.1007/s10570-019-02363-7 · Cited by 81
“Among them, TEMPO has been explored widely since its discovery for the isolation and functionalization of CNCs (Montanari et al. 2005; Habibi et al. 2006; Saito et al. 2006).”
BackgroundSilva, T. C. F., Habibi, Y., Colodette, J. L., Elder, T., & Lucia, L. A. (2012) · Cellulose · doi:10.1007/s10570-012-9761-x · Cited by 80
“Previous work has revealed that the homogenization of pre-TEMPO-mediated oxidized fibers can more easily disintegrate cellulose fibers into a microfibrillated suspension than using mechanical treatment alone (Saito et al. 2006).”
Synthesis of Multifunctional Cellulose Nanocrystals for Lectin Recognition and Bacterial Imaging
Zhou, J., Butchosa, N., Jayawardena, H. S. N., Park, J., Zhou, Q., Yan, M., & Ramström, O. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00227 · Cited by 84
Ultrathin Films of Cellulose: A Materials Perspective
Kontturi, E., & Spirk, S. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00488 · Cited by 81
“…when their popularity surged due to several novel entries on preparation via mechanical disintegration with suitable pretreatments (Abe et al., 2007; Henriksson et al., 2007; Pääkkö et al., 2007) and an influential chemical pretreatment called TEMPO-mediated oxidation (Saito et al., 2006, 2007).”
BackgroundPottathara, Y. B., Bobnar, V., Gorgieva, S., Grohens, Y., Finšgar, M., Thomas, S., & Kokol, V. (2016) · RSC Advances · doi:10.1039/c6ra06744a · Cited by 83
Nanocellulose as analyte and analytical tool: Opportunities and challenges
Ruiz-Palomero, C., Soriano, M. L., & Valcárcel, M. (2016) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2016.11.007 · Cited by 78
Development and applications of transparent conductive nanocellulose paper
Li, S., & Lee, P. S. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1364976 · Cited by 80
“[13] made a breakthrough in preparing NFC, by using 2,2,6,6-tetramethylpiperidine-1-oxylradical (TEMPO) oxidation to pre-treat wood pulp under aqueous solution.”
BackgroundMethodLee, H., Kim, K., Mun, S. C., Chang, Y. K., & Choi, S. Q. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.104 · Cited by 79
Nanocellulose-Based Composites
Spence, K. L., Habibi, Y., & Dufresne, A. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_7 · Cited by 86
Characterization of Various Kinds of Nanocellulose
Ioelovich, M. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch2 · Cited by 84
Highly tough and transparent layered composites of nanocellulose and synthetic silicate
Wu, C.-N., Yang, Q., Takeuchi, M., Saito, T., & Isogai, A. (2014) · Nanoscale · doi:10.1039/c3nr04102f · Cited by 81
Self-citationGeng, L., Peng, X., Zhan, C., Naderi, A., Sharma, P. R., Mao, Y., & Hsiao, B. S. (2017) · Cellulose · doi:10.1007/s10570-017-1496-2 · Cited by 79
“1999), carboxylation (Saito et al. 2006), phosphorylation”
BackgroundInfluentialChen, Y., Fan, D., Lyu, S., Li, G., Jiang, F., & Wang, S. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05085 · Cited by 77
Nanocellulose and its derivative materials for energy and environmental applications
Peter, S., Lyczko, N., Gopakumar, D. A., Maria, H. J., Nzihou, A., & Thomas, S. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-07070-6 · Cited by 79
Jin, X., Wang, S., Sang, C., Yue, Y., Xu, X., Mei, C., Xiao, H., Lou, Z., & Han, J. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c11567 · Cited by 76
Nanocellulose-Based Materials for Water Pollutant Removal: A Review
Abdelhamid, H. N. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25158529 · Cited by 88
Coupling onto surface carboxylated cellulose nanocrystals
Nadege, F., Marais, M. F., Montanari, S., & Vignon, M. R. (2010) · Polymer · doi:10.1016/j.polymer.2010.09.001 · Cited by 78
Self-citationOn the structure and oxygen transmission rate of biodegradable cellulose nanobarriers
Chinga‐Carrasco, G., & Syverud, K. (2012) · Nanoscale Research Letters · doi:10.1186/1556-276x-7-192 · Cited by 76
“[15].”
Song, N., Cui, S., Jiao, D., Hou, X., Ding, P., & Shi, L. (2017) · Carbon · doi:10.1016/j.carbon.2017.01.017 · Cited by 77
Sustainable route to prepare functional lignin-containing cellulose nanofibrils
Jin, K., Zhang, D., Pan, B., Lim, K. H., Abitbol, T., Wang, W., & Yang, X. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.145189 · Cited by 78
Cellulose nanofibrils extracted from the byproduct of cotton plant
Miao, X., Lin, J., Tian, F., Li, X., Bian, F., & Wang, J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.056 · Cited by 78
Charani, P. R., Firouzabadi, M. D., Afra, E., Blademo, Å., Naderi, A., & Lindström, T. (2013) · Cellulose · doi:10.1007/s10570-013-9998-z · Cited by 78
“Chemical (Saito et al. 2006; Wågberg et al. 1987) and enzymatic (Henriksson et al. 2007; Pääkkö et al. 2007) pre-treatment methods are used to reduce the energy consumption during MFC production to acceptable levels, which has been identified as one of the major requirements for large scale…”
BackgroundMethodSelective Permeation of Hydrogen Gas Using Cellulose Nanofibril Film
Fukuzumi, H., Fujisawa, S., Saito, T., & Isogai, A. (2013) · Biomacromolecules · doi:10.1021/bm400377e · Cited by 82
Self-citationLam, E., Leung, A. C. W., Liu, Y., Majid, E., Hrapovic, S., Male, K. B., & Luong, J. H. T. (2012) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc3001367 · Cited by 75
Toivonen, M. S., Kurki-Suonio, S., Wagermaier, W., Hynninen, V., Hietala, S., & Ikkala, O. T. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00059 · Cited by 79
Kawee, N., Lam, N. T., & Sukyai, P. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.101 · Cited by 78
Ansari, F., & Berglund, L. A. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00142 · Cited by 77
Amiralian, N., Annamalai, P. K., Memmott, P. C., Taran, E., Schmidt, S., & Martin, D. J. (2015) · RSC Advances · doi:10.1039/c5ra02936h · Cited by 79
Sang, X., Qin, C., Tong, Z., Kong, S., Jia, Z., Wan, G., & Liu, X. (2017) · Cellulose · doi:10.1007/s10570-017-1279-9 · Cited by 75
“The fragments stuck together by electrostatic interaction of charges among microfibril surfaces during dry (Saito et al. 2006, 2007).”
BackgroundIsolation of Silk Mesostructures for Electronic and Environmental Applications
Zheng, K., Zhong, J., Qi, Z., Ling, S., & Kaplan, D. L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201806380 · Cited by 76
Yokota, S., Kamada, K., Sugiyama, A., & Kondo, T. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115293 · Cited by 79
Suchy, M., Virtanen, J., Kontturi, E., & Vuorinen, T. (2009) · Biomacromolecules · doi:10.1021/bm901268j · Cited by 83
3 nm Thick Lignocellulose Nanofibers Obtained from Esterified Wood with Maleic Anhydride
Iwamoto, S., & Endo, T. (2014) · ACS Macro Letters · doi:10.1021/mz500787p · Cited by 75
Bioinspired Mechanical Gradients in Cellulose Nanofibril/Polymer Nanopapers
Wang, B., Benítez, A., Lossada, F., Merindol, R., & Walther, A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511512 · Cited by 79
Faradilla, R. F., Lee, G., Rawal, A., Hutomo, T., Stenzel, M. H., & Arcot, J. (2016) · Cellulose · doi:10.1007/s10570-016-1025-8 · Cited by 76
“For the same extraction method, the size of the nanocellulose varied according to the source of the cellulose, for example, TEMPO-mediated nanocellulose from wood and cotton has 3–5-nm diameter, tunicin 3–20 nm, and bacteria 3–100 nm (Saito et al. 2006).”
BackgroundMethodInfluentialHe, M. H., Yang, G., Chen, J., Ji, X., & Wang, Q. (2018) · Journal of Wood Chemistry and Technology · doi:10.1080/02773813.2017.1411368 · Cited by 77
Lee, M., Heo, M. H., Lee, H., Lee, H.-H., Jeong, H., Kim, Y., & Shin, J. (2018) · Green Chemistry · doi:10.1039/c8gc00577j · Cited by 74
Wu, C.-N., & Cheng, K. (2016) · Cellulose · doi:10.1007/s10570-016-1114-8 · Cited by 80
“Saito et al. (2006) first reported that individual BCNs can be prepared by TEMPO-mediated oxidation followed by mild mechanical treatment.”
BackgroundBeaumont, M., Winklehner, S., Veigel, S., Mundigler, N., Gindl‐Altmutter, W., Potthast, A., & Rosenau, T. (2020) · Green Chemistry · doi:10.1039/d0gc02116d · Cited by 76
Tsuboi, K., Yokota, S., & Kondo, T. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p069-076 · Cited by 74
“Although various methods of preparing CNF have been proposed (Nakagaito, Yano 2005; Saito et al. 2006), the aqueous counter collision (ACC) method developed by Kondo et al. (2008), which allows to cleave interfacial interactions among cellulose molecules using dual high speed water jets, is one of…”
MethodChemically extracted nanocellulose from sisal fibres by a simple and industrially relevant process
Trifol, J., Sillard, C., Plackett, D., Szabó, P., Bras, J., & Daugaard, A. E. (2016) · Cellulose · doi:10.1007/s10570-016-1097-5 · Cited by 76
Sakakibara, K., Yano, H., & Tsujii, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07769 · Cited by 72
Production of High-Solid-Content Fire-Retardant Phosphorylated Cellulose Microfibrils
Khakalo, A., Jaiswal, A. K., Kumar, V., Gestranius, M., Kangas, H., & Tammelin, T. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c04403 · Cited by 72
Sun, X., & Jiang, F. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122305 · Cited by 83
Zhang, Q., Zhu, E., Li, T., Zhang, L., & Wang, Z. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.4c00823 · Cited by 77
Isolation of cellulose nanofibrils from mandarin (Citrus unshiu) peel waste
Hiasa, S., Iwamoto, S., Endo, T., & Edashige, Y. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.08.007 · Cited by 73
Tan, C., Peng, J., Lin, W., Xing, Y., Xu, K., Wu, J., & Chen, M. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.11.033 · Cited by 75
Hees, T., Zhong, F., Rudolph, T., Walther, A., & Mülhaupt, R. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605586 · Cited by 73
Metadata
- Authors
- Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Corresponding author
- Nishiyama, Yoshiharu
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-05-03
- Volume
- 7
- Issue
- 6
- Pages
- 1687-1691
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2020375047
- Cited by
- 1,796
- References
- 21
- Citations by year
- 2026: 57 · 2025: 72 · 2024: 85 · 2023: 102 · 2022: 135 · 2021: 125 · 2020: 141 · 2019: 133 · 2018: 142 · 2017: 137 · 2016: 120 · 2015: 100 · 2014: 111 · 2013: 96 · 2012: 76
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Keywords
- TEMPO-mediated oxidation, cellulose microfibrils, homogeneous suspensions, cotton cellulose, tunicin, bacterial cellulose, oxidation degree, sodium hypochlorite, sonication, mechanical homogenization
- MeSH terms
- Catalysis, Cellulose, Cyclic N-Oxides, Oxidation-Reduction, Particle Size, Suspensions, Microfibrils
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.