Homogeneous Suspensions of Individualized Microfibrils from TEMPO-Catalyzed Oxidation of Native Cellulose
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Never-dried native celluloses (bleached sulfite wood pulp, cotton, tunicin, and bacterial cellulose) were disintegrated into individual microfibrils after oxidation mediated by the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical followed by a homogenizing mechanical treatment. When oxidized with 3.6 mmol of NaClO per gram of cellulose, almost the totality of sulfite wood pulp and cotton were readily disintegrated into long individual microfibrils by a treatment with a Waring Blendor, yielding transparent and highly viscous suspensions. When observed by transmission electron microscopy, the wood pulp and cotton microfibrils exhibited a regular width of 3-5 nm. Tunicin and bacterial cellulose could be disintegrated by sonication. A bulk degree of oxidation of about 0.2 per one anhydroglucose unit of cellulose was necessary for a smooth disintegration of sulfite wood pulp, whereas only small amounts of independent microfibrils were obtained at lower oxidation levels. This limiting degree of oxidation decreased in the following order: sulfite wood pulp > cotton > bacterial cellulose, tunicin.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [85]
Citations
Cites
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., & Isogai, A. (2004) · Biomacromolecules · doi:10.1021/bm0497769 · Cited by 1,292
Self-citationPolymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766
Liquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
The structure and mechanical properties of sheets prepared from bacterial cellulose
Yamanaka, S., Watanabe, K., Kitamura, N., Iguchi, M., Mitsuhashi, S., Nishi, Y., & Uryu, M. (1989) · Journal of Materials Science · doi:10.1007/bf01139032 · Cited by 612
Combined infrared and electron diffraction study of the polymorphism of native celluloses
Sugiyama, J., Persson, J., & Chanzy, H. (1991) · Macromolecules · doi:10.1021/ma00009a050 · Cited by 541
de Nooy, A. E. J., Besemer, A. C., & van Bekkum, H. (1995) · Carbohydrate Research · doi:10.1016/0008-6215(94)00343-e · Cited by 471
Preparation of Polyuronic Acid from Cellulose by TEMPO-mediated Oxidation
Isogai, A., & Kato, Y. (1998) · Cellulose · doi:10.1023/a:1009208603673 · Cited by 437
Self-citationCellulose Biosynthesis: Current Views and Evolving Concepts
SAXENA, I. M., & BROWN, R. M. (2005) · Annals of Botany · doi:10.1093/aob/mci155 · Cited by 424
Research works printed but not linked: 5
- Lepoutre P., 1974, TAPPI, 57, 87
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Saito T., 2005, TAPPI J., 4, 3
- Saito, T.; Okita, Y.; Nge, T. T.; Sugiyama, J.; Isogai, A. Carbohydr. Polym. , in press.
Cited by
Items 601–700 of 1,002
Cavitation Fibrillation of Cellulose Fiber
Redlinger-Pohn, J. D., Petkovšek, M., Gordeyeva, K. S., Zupanc, M. Ž., Gordeeva, A., Zhang, Q., Dular, M., & Söderberg, D. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.1c01309 · Cited by 58
Ridgway, C. J., & Gane, P. A. C. (2011) · Cellulose · doi:10.1007/s10570-011-9634-8 · Cited by 63
“1998), by the so-called TEMPO-mediated oxidation, (CH2)3(CMe2)2NO (Saito et al. 2006; Saito and Isogai 2007), or by various mechanical methods such as crushing pulps or by forcing fibres through a constriction in an homogenizer with high pressure (Nakagaito and Yano 2005).”
MethodRodionova, G., Saito, T., Lenes, M., Eriksen, Ø., Gregersen, Ø. W., Kuramae, R., & Isogai, A. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0483-9 · Cited by 61
Self-citationWei, J., Chen, Y., Liu, H., Du, C., Yu, H., Ru, J., & Zhou, Z. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.08.006 · Cited by 56
Blok, A. E., Bolhuis, D. P., Kibbelaar, H. V. M., Bonn, D., Velikov, K. P., & Stieger, M. (2021) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2021.107052 · Cited by 55
“Microfibrillated cellulose is a type of nanocellulose produced by mechanically disintegrating cellulose originating from e.g. wood (Saito, Nishiyama, Putaux, Vignon, & Isogai, 2006; Spence, Venditti, Rojas, Habibi, & Pawlak, 2010; Stenstad, Andresen, Tanem, & Stenius, 2008; Taipale, ¨ Nyk ¨ anen,…”
Chinga‐Carrasco, G., Tobjörk, D., & Österbacka, R. (2012) · Journal of Nanoparticle Research · doi:10.1007/s11051-012-1213-x · Cited by 54
Triticale crop residue: a cheap material for high performance nanofibrillated cellulose
Boufi, S., & Gandini, A. (2014) · RSC Advances · doi:10.1039/c4ra12918k · Cited by 54
Hoeng, F., Denneulin, A., Krosnicki, G., & Bras, J. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc03629e · Cited by 55
Skogberg, A., Mäki, A.-J., Mettänen, M., Lahtinen, P., & Kallio, P. J. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00963 · Cited by 54
Weishaupt, R., Heuberger, L., Siqueira, G. D. F., Gutt, B., Zimmermann, T., Maniura‐Weber, K., Salentinig, S., & Faccio, G. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04470 · Cited by 57
The potential of TEMPO-oxidized cellulose nanofibrils as rheology modifiers in food systems
Aaen, R., Simon, S., Brodin, F. W., & Syverud, K. (2019) · Cellulose · doi:10.1007/s10570-019-02448-3 · Cited by 58
Chen, J., Li, H., Zhang, L., Du, C., Fang, T., & Hu, J. Q. (2020) · Scientific Reports · doi:10.1038/s41598-020-59918-z · Cited by 54
Cai, Y., Geng, L., Chen, S., Shi, S., Hsiao, B. S., & Peng, X. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c04504 · Cited by 54
Transmission electron microscopy for wood and fiber analysis – A Review
Reza, M., Kontturi, E., Jääskeläinen, A., Vuorinen, T., & Ruokolainen, J. (2015) · BioResources · doi:10.15376/biores.10.3.reza · Cited by 54
Characterization of cellulose nanofiber sheets from different refining processes
Nobuta, K., Teramura, H., Ito, H., Hongo, C., Kawaguchi, H., Ogino, C., Kondo, A., & Nishino, T. (2015) · Cellulose · doi:10.1007/s10570-015-0792-y · Cited by 57
“In the case of chemical fibrillation, two methods have been thoroughly investigated: 2,2,6,6-tetramethylpiperidine-1oxyl radical (TEMPO) oxidation (Saito et al. 2006, 2007) and cationization (Pei et al. 2013).”
MethodWu, C.-N., Saito, T., Yang, Q., Fukuzumi, H., & Isogai, A. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502701e · Cited by 57
Self-citationTEMPO-mediated oxidation of bacterial cellulose in a bromide-free system
Chen, L., Zhang, S., Sheng, L., Liao, S., Xi, T., & Zhang, Z. (2013) · Colloid & Polymer Science · doi:10.1007/s00396-013-3033-7 · Cited by 55
Microfibrillated cellulose : Energy-efficient preparation techniques and key properties
Ankerfors, M. (2012) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 86
Lindström, T., Aulin, C., Naderi, A., & Ankerfors, M. (2014) · Wiley eBooks · doi:10.1002/0471440264.pst614 · Cited by 64
Nanocellulosics: Benign, Sustainable, and Ubiquitous Biomaterials for Water Remediation
Ray, S. S., & Iroegbu, A. O. C. (2021) · ACS Omega · doi:10.1021/acsomega.0c06070 · Cited by 52
Bettaieb, F., Nechyporchuk, O., Khiari, R., Mhenni, M. F., Dufresne, A., & Belgacem, M. N. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.07.091 · Cited by 57
Developments in nano-additives for paper industry
Julkapli, N. M., & Bagheri, S. (2015) · Journal of Wood Science · doi:10.1007/s10086-015-1532-5 · Cited by 52
“Consequently, it limits the requirement for high barrier or extended applications in packaging [67].”
BackgroundMechanically strong and thermosensitive hydrogels reinforced with cellulose nanofibrils
Liu, L. L., Li, L., Qing, Y., Yan, N., Wu, Y., Li, X., & Tian, C. (2016) · Polymer Chemistry · doi:10.1039/c6py01652a · Cited by 54
Andres, B., Dahlström, C., Blomquist, N., Norgren, M., & Olin, H. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.12.041 · Cited by 54
“A high degree of total charge due to TEMPO-oxidation is known to facilitate the degree of fibrillation in the mechanical treatment [19].”
BackgroundPreparation of cellulose nanofibers from Miscanthus x. Giganteus by ammonium persulfate oxidation
Yang, H., Zhang, Y., Kato, R., & Rowan, S. J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.02.008 · Cited by 58
Medina, L., Nishiyama, Y., Daicho, K., Saito, T., Yan, M., & Berglund, L. A. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b00333 · Cited by 52
Self-citationProperties of phosphorylated cellulose nanofiber dispersions under various conditions
Noguchi, Y., Homma, I., & Watanabe, T. (2019) · Cellulose · doi:10.1007/s10570-019-02922-y · Cited by 55
“Such chemical treatments include TEMPO oxidation (Saito et al. 2006), alkoxylation including carboxymethylation (Naderi et al. 2014, 2017b), maleic acid esterification (Iwamoto and Endo 2015; Iwamoto et al. 2019), phosphorylation (Ghanadpour et al. 2015; Naderi et al. 2016; Noguchi et al. 2017),…”
BackgroundAdhesion and Stability of Nanocellulose Coatings on Flat Polymer Films and Textiles
Saremi, R., Borodinov, N., Laradji, A. M., Sharma, S., Luzinov, I. A., & Minko, S. (2020) · Molecules · doi:10.3390/molecules25143238 · Cited by 56
Beaumont, M., Otoni, C. G., Mattos, B. D., Koso, T. V., Abidnejad, R., Zhao, B., Kondor, A., King, A. W. T., & Rojas, O. J. (2021) · Green Chemistry · doi:10.1039/d1gc02292j · Cited by 53
Cellulose-Based Scattering Enhancers for Light Management Applications
Yang, H. S., Jacucci, G., Schertel, L., & Vignolini, S. (2022) · ACS Nano · doi:10.1021/acsnano.1c09198 · Cited by 51
Chen, S., Ren, N., Cui, M., Huang, R., Qi, W. D., He, Z., & Su, R. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c01904 · Cited by 52
Ruiz-Palomero, C., Soriano, M. L., & Valcárcel, M. (2014) · Talanta · doi:10.1016/j.talanta.2014.02.055 · Cited by 52
Nechyporchuk, O., Belgacem, M. N., & Pignon, F. (2015) · Cellulose · doi:10.1007/s10570-015-0640-0 · Cited by 56
“The polydispersity of the TEMPO-oxidized NFC was confirmed using SAXS analysis.”
BackgroundMethodInfluentialGeng, L., Chen, B., Peng, X., & Kuang, T. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.054 · Cited by 53
Schmitt, J., Calabrese, V., da Silva, M. A., Lindhoud, S., Alfredsson, V., Scott, J. L., & Edler, K. J. (2018) · Physical Chemistry Chemical Physics · doi:10.1039/c8cp00355f · Cited by 57
Larsson, P. A., Riazanova, A. V., Çınar, G., Rojas, R., Øvrebø, H. H., Wågberg, L., & Berglund, L. A. (2018) · Cellulose · doi:10.1007/s10570-018-2214-4 · Cited by 51
TEMPO oxidation and high-speed blending as a combined approach to disassemble bacterial cellulose
do Nascimento, E. S., Pereira, A. L. S., Barros, M. D. O., Barroso, M. K. D. A., Lima, H. L. S., Borges, M. D. F., Feitosa, J. P. D. A., de Azeredo, H. M. C., & Rosa, M. D. F. (2019) · Cellulose · doi:10.1007/s10570-018-2208-2 · Cited by 55
Nishiguchi, A., & Taguchi, T. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.8b01767 · Cited by 51
Material design of nanocellulose/polymer composites via Pickering emulsion templating
Fujisawa, S. (2020) · Polymer Journal · doi:10.1038/s41428-020-00408-4 · Cited by 53
Lungu, A., Cernencu, A. I., Dinescu, S., Balahura, R., Mereuță, P. E., Costache, M., Syverud, K., Stancu, I., & Iovu, H. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109200 · Cited by 51
“CNF suspension was obtained from never-dried cellulose pulp using the TEMPO/NaBr/NaClO oxidation system described by Saito and coworkers [46].”
MethodNanocellulose based flexible and highly conductive film and its application in supercapacitors
Hou, M., Hu, Y., Xu, M., & Li, B. (2020) · Cellulose · doi:10.1007/s10570-020-03420-2 · Cited by 51
Pere, J., Tammelin, T., Niemi, P., Lille, M. E., Virtanen, T., Penttilä, P. A., Ahvenainen, P., & Grönqvist, S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c05202 · Cited by 58
Korotcenkov, G. S., Simonenko, N. P., Симоненко, Е. П., Sysoev, V. V., & Brinzari, V. (2023) · Nanomaterials · doi:10.3390/nano13081381 · Cited by 56
Tailoring Functionality of Nanocellulose: Current Status and Critical Challenges
Zhang, Y., Deng, W., Wu, M., Rahmaninia, M., Xu, C., & Li, B. (2023) · Nanomaterials · doi:10.3390/nano13091489 · Cited by 57
“[59] used bleached sulfite cotton, bacterial cellulose, tunicin, and wood pulp to produce NC.”
MethodWang, S., Ma, Y., Zhu, S., Ma, H., Yue, Y., Wu, Q., Xiao, H., & Han, J. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.153552 · Cited by 50
The effect of residual fibres on the micro-topography of cellulose nanopaper
Chinga‐Carrasco, G., Аверьянова, Н. В., Kondalenko, O., Garaeva, M., Petrov, V. А., Leinsvang, B., & Karlsen, T. (2013) · Micron · doi:10.1016/j.micron.2013.09.002 · Cited by 50
“Typical diameters of the nanofibrils produced ith pre-treatments are less than roughly 20 nm (Saito et al., 2006; ågberg et al., 2008; Chinga-Carrasco et al., 2012a).”
BackgroundMa, H., Yoon, K., Rong, L., Shokralla, M., Kopot, A., Wang, X., Fang, D., Hsiao, B. S., & Chu, B. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie100545k · Cited by 50
Tehrani, Z., Nordli, H. R., Pukstad, B. S., Gethin, D. T., & Chinga‐Carrasco, G. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.024 · Cited by 54
Paukkonen, H., Ukkonen, A., Szilvay, G. R., Yliperttula, M. L., & Laaksonen, T. (2017) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2017.01.029 · Cited by 52
“Cellulose kraft pulp was chemically modified and fibrillated to form NFC-O hydrogel (Saito et al., 2006; Saito et al., 2007).”
BackgroundMethodWet-spinning of highly conductive nanocellulose–silver fibers
Wang, J., Huang, S., Lu, X., Xu, Z., Zhao, Y. J., Li, J., & Wang, X. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc03217j · Cited by 50
Relaxation phenomenon and swelling behavior of regenerated cellulose fibers affected by water
Okugawa, A., Sakaino, M., Yuguchi, Y., & Yamane, C. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115663 · Cited by 50
Araya-Chavarría, K., Rojas, R., Amador, K. R., Sulbarán-Rangel, B., Rojas, O. J., & Esquivel, M. (2021) · Waste and Biomass Valorization · doi:10.1007/s12649-021-01619-3 · Cited by 50
Liu, Y., Chen, J., Liu, Z., Xu, H., Zheng, Y., Zhong, J., Yang, Q., Tian, H., Shi, Z., Yao, J., et al. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.154541 · Cited by 49
Ramesh, M., Rajeshkumar, L., Balaji, D., & Bhuvaneswari, V. (2022) · Current Analytical Chemistry · doi:10.2174/1573411018666220421112916 · Cited by 49
Zhang, Y., Zhao, L., Liu, Y., Dong, C., & Zhang, K. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122931 · Cited by 51
Swelling and Free-Volume Characteristics of TEMPO-Oxidized Cellulose Nanofibril Films
Torstensen, J. Ø., Liu, M., Jin, S.-A., Deng, L., Hawari, A. I., Syverud, K., Spontak, R. J., & Gregersen, Ø. W. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.7b01814 · Cited by 50
Transmission electron microscopy of cellulose. Part 2: technical and practical aspects
Ogawa, Y., & Putaux, J. (2018) · Cellulose · doi:10.1007/s10570-018-2075-x · Cited by 49
Self-citationNanocellulose in polymer composites and biomedical applications
Lü, Y., Tekinalp, H., Eberle, C. C., Peter, W. H., Naskar, A. K., & Ozcan, S. (2014) · TAPPI Journal · doi:10.32964/tj13.6.47 · Cited by 54
Preparation and Applications of the Cellulose Nanocrystal
Yang, Y., Chen, Z., Zhang, J., Wang, G., Zhang, R., & Suo, D. (2019) · International Journal of Polymer Science · doi:10.1155/2019/1767028 · Cited by 55
Fire retardancy and thermal behaviors of Cellulose nanofiber/zinc borate aerogel
Cheng, X., Zhu, S., Pan, Y., Deng, Y., Shi, L. X., & Gong, L. (2020) · Cellulose · doi:10.1007/s10570-020-03289-1 · Cited by 49
Wang, J., Wang, Q., Wu, Y., Bai, F., Wang, H., Si, S., Lu, Y., Li, X., & Wang, S. (2020) · Nanomaterials · doi:10.3390/nano10112227 · Cited by 49
“TEMPO oxidation is considered a classical and effective method for preparing CNFs [12,22,27,28].”
BackgroundMethodTsuji, T., Tsuboi, K., Yokota, S., Tagawa, S., & Kondo, T. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.0c01464 · Cited by 50
Nanofibrillated cellulose as a coating agent to improve print quality of synthetic fiber sheets
Hamada, H., & Bousfield, D. W. (2010) · TAPPI Journal · doi:10.32964/tj9.11.25 · Cited by 49
Nanofiber-reinforced biocomposites
Orasugh, J. T., Ghosh, S. K., & Chattopadhyay, D. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819904-6.00010-4 · Cited by 54
2,2,6,6‐Tetramethylpiperidinyloxyl (TEMPO) Radical Mediated Electro‐Oxidation Reactions: A Review
Prakash, N., Rajeev, R., John, A., Vijayan, A., George, L., & Varghese, A. (2021) · ChemistrySelect · doi:10.1002/slct.202102346 · Cited by 48
Vanderfleet, O. M., D’Acierno, F., Isogai, A., MacLachlan, M. J., Michal, C. A., & Cranston, E. D. (2022) · Chemistry of Materials · doi:10.1021/acs.chemmater.2c01665 · Cited by 49
Self-citationLow-Birefringent and Highly Tough Nanocellulose-Reinforced Cellulose Triacetate
Soeta, H., Fujisawa, S., Saito, T., Berglund, L. A., & Isogai, A. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02863 · Cited by 48
Self-citationManhas, N., Kandasubramanian, B., Prajith, P., Rule, P., & Nimje, S. V. (2015) · RSC Advances · doi:10.1039/c4ra17191h · Cited by 49
Nabeela, K., Thomas, R. T., Nair, J. B., Maiti, K. K., Warrier, K. G. K., & Pillai, S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07295 · Cited by 49
Uribe, B. E. B., Chiromito, E. M. S., Carvalho, A. J. F., Arenal, R., & Tarpani, J. R. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.08.004 · Cited by 49
Recyclable and superelastic aerogels based on carbon nanotubes and carboxymethyl cellulose
Hajian, A., Fu, Q., & Berglund, L. A. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.01.002 · Cited by 48
Versatile templates from cellulose nanofibrils for photosynthetic microbial biofuel production
Jämsä, M., Kosourov, S. N., Rissanen, V., Hakalahti, M., Pere, J., Ketoja, J. A., Tammelin, T., & Allahverdiyeva, Y. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta11164a · Cited by 48
Fluorescent cellulose nanocrystals with responsiveness to solvent polarity and ionic strength
Wu, W., Song, R., Xu, Z., Jing, Y., Dai, H., & Fang, G. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.07.085 · Cited by 48
“First, carboxylated cellulose nanofibers were prepared from wood pulp through TEMPO-mediated oxidation according to reference [28].”
MethodYeasmin, S., Yeum, J. H., & Yang, S. B. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116307 · Cited by 49
Nemoto, J., Soyama, T., Saito, T., & Isogai, A. (2012) · Biomacromolecules · doi:10.1021/bm300041k · Cited by 50
Self-citationZhao, M., Fujisawa, S., & Saito, T. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.1c01143 · Cited by 47
Self-citationFabrication of micropillars on nanocellulose films using a roll-to-roll nanoimprinting method
Mäkelä, T., Kainlauri, M., Willberg‐Keyriläinen, P., Tammelin, T., & Forsström, U. (2016) · Microelectronic Engineering · doi:10.1016/j.mee.2016.05.023 · Cited by 47
Cellulose nanofibers for magnetically-separable and highly loaded enzyme immobilization
Je, H. H., Noh, S., Hong, S.-G., Ju, Y., Kim, J., & Hwang, D. S. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.04.110 · Cited by 48
Yang, W., Jiao, L., Liu, W., & Dai, H. (2019) · Nanomaterials · doi:10.3390/nano9010107 · Cited by 47
“TEMPO-oxidized wood fibers (TOWFs) and TEMPO-oxidized cellulose nanofibrils (TOCNs) were prepared according to previous reports [17,18].”
MethodValls, C., Pastor, F. I. J., Roncero, M. B., Vidal, T., Dı́az, P., Martínez, J., & Valenzuela, S. V. (2019) · Biotechnology for Biofuels · doi:10.1186/s13068-019-1502-z · Cited by 47
Rahmatika, A. M., Goi, Y., Kitamura, T., Widiyastuti, W., & Ogi, T. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110033 · Cited by 48
Basu, S., Malik, S., Joshi, G., Gupta, P. K., & Rana, V. (2021) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2021.100050 · Cited by 55
Balahura, L.-R., Dinescu, S., Balaș, M., Cernencu, A. I., Lungu, A., Vlăsceanu, G. M., Iovu, H., & Costache, M. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13081189 · Cited by 50
“Interest in nanocelluloses has grown rapidly with the introduction and optimization of controlled oxidative treatments [17] that tune the surface properties and render gel-like suspensions of cellulose.”
InfluentialQin, D., Zhang, R., Cao, B., & Li, P. (2021) · Journal of Membrane Science · doi:10.1016/j.memsci.2021.119672 · Cited by 48
Shen, H., Peng, S., Luo, Q., Zhou, J. P., He, J., Zhou, G., & Xu, X. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213820 · Cited by 48
3D shape morphing of stimuli-responsive composite hydrogels
Xiao, L., Li, M., Tang, L., Shi, D., Lam, E., & Bae, J. (2023) · Materials Chemistry Frontiers · doi:10.1039/d3qm00856h · Cited by 50
“225 228 The functionalization of cellulose extends the functionalities of the cellulose-based stimuli-responsive hydrogels.”
Li, M., Mu, Y., Xu, Q., Jin, L., & Fu, Y. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.117876 · Cited by 48
Sonyeam, J., Chaipanya, R., Suksomboon, S., Khan, M. J., Amatariyakul, K., Wibowo, A., Posoknistakul, P., Charnnok, B., Liu, C., Laosiripojana, N., et al. (2024) · Scientific Reports · doi:10.1038/s41598-024-57631-9 · Cited by 47
Ruiz-Palomero, C., Soriano, M. L., & Valcárcel, M. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.01.098 · Cited by 46
Pérez‐Pacheco, E., Canto-Pinto, J. C., Moo‐Huchin, V. M., Estrada-Mota, I. A., Estrada‐León, R. J., & Chel‐Guerrero, L. (2016) · InTech eBooks · doi:10.5772/65397 · Cited by 52
“The mechanical methods to extract CNF from wood pulp and parenchyma cells typically involve a high‐pressure homogenizer treatment [42, 54], a microfluidizer [55, 56], a high‐ pressure refiner, a super‐grinder treatment [57], or ultrasonication [58].”
Engström, J., Hatton, F. L., Wågberg, L., D’Agosto, F., Lansalot, M., Malmström, E., & Carlmark, A. (2017) · Polymer Chemistry · doi:10.1039/c6py01904h · Cited by 46
Substrate role in coating of microfibrillated cellulose suspensions
Kumar, V., Koppolu, V. R., Bousfield, D. W., & Toivakka, M. (2017) · Cellulose · doi:10.1007/s10570-017-1201-5 · Cited by 53
Effects of preparation approaches on optical properties of self-assembled cellulose nanopapers
Yang, W., Jiao, L., Min, D., Liu, Z., & Dai, H. (2017) · RSC Advances · doi:10.1039/c6ra27529j · Cited by 48
Characterization of cellulose nanofibrils prepared by direct TEMPO-mediated oxidation of hemp bast
Puangsin, B., Soeta, H., Saito, T., & Isogai, A. (2017) · Cellulose · doi:10.1007/s10570-017-1390-y · Cited by 47
“The fibrils are typically 3–4 nm wide, several micromters long, and are dispersed in water with good homogeneity (Saito et al. 2006, 2007, 2009; Isogai et al. 2011; Isogai 2013).”
BackgroundSelf-citationGuern, F. L., Ouk, T., Grenier, K., Joly, N., Lequart, V., & Sol, V. (2017) · Journal of Materials Chemistry B · doi:10.1039/c7tb01274h · Cited by 46
Song, N., Pan, H., Liang, X., Cao, D., Shi, L., & Ding, P. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc01277f · Cited by 47
Geng, S., Yao, K., Zhou, Q., & Oksman, K. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01086 · Cited by 48
Zhu, L., Li, X., Kasuga, T., Uetani, K., Nogi, M., & Koga, H. (2022) · Journal of Materials Chemistry C · doi:10.1039/d1tc05339f · Cited by 49
Jiao, D., Song, N., Ding, P., & Shi, L. (2022) · Composites Communications · doi:10.1016/j.coco.2022.101101 · Cited by 46
Auvinen, V.-V., Virtanen, J., Merivaara, A., Virtanen, V., Laurén, P., Tuukkanen, S., & Laaksonen, T. (2020) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2020.101625 · Cited by 45
Metadata
- Authors
- Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Corresponding author
- Nishiyama, Yoshiharu
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-05-03
- Volume
- 7
- Issue
- 6
- Pages
- 1687-1691
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2020375047
- Cited by
- 1,796
- References
- 21
- Citations by year
- 2026: 57 · 2025: 72 · 2024: 85 · 2023: 102 · 2022: 135 · 2021: 125 · 2020: 141 · 2019: 133 · 2018: 142 · 2017: 137 · 2016: 120 · 2015: 100 · 2014: 111 · 2013: 96 · 2012: 76
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Keywords
- TEMPO-mediated oxidation, cellulose microfibrils, homogeneous suspensions, cotton cellulose, tunicin, bacterial cellulose, oxidation degree, sodium hypochlorite, sonication, mechanical homogenization
- MeSH terms
- Catalysis, Cellulose, Cyclic N-Oxides, Oxidation-Reduction, Particle Size, Suspensions, Microfibrils
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.