Homogeneous Suspensions of Individualized Microfibrils from TEMPO-Catalyzed Oxidation of Native Cellulose
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Never-dried native celluloses (bleached sulfite wood pulp, cotton, tunicin, and bacterial cellulose) were disintegrated into individual microfibrils after oxidation mediated by the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical followed by a homogenizing mechanical treatment. When oxidized with 3.6 mmol of NaClO per gram of cellulose, almost the totality of sulfite wood pulp and cotton were readily disintegrated into long individual microfibrils by a treatment with a Waring Blendor, yielding transparent and highly viscous suspensions. When observed by transmission electron microscopy, the wood pulp and cotton microfibrils exhibited a regular width of 3-5 nm. Tunicin and bacterial cellulose could be disintegrated by sonication. A bulk degree of oxidation of about 0.2 per one anhydroglucose unit of cellulose was necessary for a smooth disintegration of sulfite wood pulp, whereas only small amounts of independent microfibrils were obtained at lower oxidation levels. This limiting degree of oxidation decreased in the following order: sulfite wood pulp > cotton > bacterial cellulose, tunicin.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [85]
Citations
Cites
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., & Isogai, A. (2004) · Biomacromolecules · doi:10.1021/bm0497769 · Cited by 1,292
Self-citationPolymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766
Liquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
The structure and mechanical properties of sheets prepared from bacterial cellulose
Yamanaka, S., Watanabe, K., Kitamura, N., Iguchi, M., Mitsuhashi, S., Nishi, Y., & Uryu, M. (1989) · Journal of Materials Science · doi:10.1007/bf01139032 · Cited by 612
Combined infrared and electron diffraction study of the polymorphism of native celluloses
Sugiyama, J., Persson, J., & Chanzy, H. (1991) · Macromolecules · doi:10.1021/ma00009a050 · Cited by 541
de Nooy, A. E. J., Besemer, A. C., & van Bekkum, H. (1995) · Carbohydrate Research · doi:10.1016/0008-6215(94)00343-e · Cited by 471
Preparation of Polyuronic Acid from Cellulose by TEMPO-mediated Oxidation
Isogai, A., & Kato, Y. (1998) · Cellulose · doi:10.1023/a:1009208603673 · Cited by 437
Self-citationCellulose Biosynthesis: Current Views and Evolving Concepts
SAXENA, I. M., & BROWN, R. M. (2005) · Annals of Botany · doi:10.1093/aob/mci155 · Cited by 424
Research works printed but not linked: 5
- Lepoutre P., 1974, TAPPI, 57, 87
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Saito T., 2005, TAPPI J., 4, 3
- Saito, T.; Okita, Y.; Nge, T. T.; Sugiyama, J.; Isogai, A. Carbohydr. Polym. , in press.
Cited by
Items 201–300 of 1,002
The behaviour of cationic NanoFibrillar Cellulose in aqueous media
Olszewska, A., Eronen, P., Johansson, L., Malho, J., Ankerfors, M., Lindström, T., Ruokolainen, J., Laine, J., & Österberg, M. (2011) · Cellulose · doi:10.1007/s10570-011-9577-0 · Cited by 178
“So far the unmodified (Pa ¨a ¨kko ¨ et al. 2007) and anionically modified nanofibrils ( Saito et al. 2006, 2007 ; W agberg et al. 1987, 2008) have gained most attention in the literature.”
BackgroundResultInfluentialOrelma, H., Filpponen, I., Johansson, L., Österberg, M., Rojas, O. J., & Laine, J. (2012) · Biointerphases · doi:10.1007/s13758-012-0061-7 · Cited by 181
A Simple Approach to Prepare Carboxycellulose Nanofibers from Untreated Biomass
Sharma, P. R., Joshi, R., Sharma, S. K., & Hsiao, B. S. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00544 · Cited by 161
Hairy cellulose nanocrystalloids: a novel class of nanocellulose
van de Ven, T. G. M., & Sheikhi, A. (2016) · Nanoscale · doi:10.1039/c6nr01570k · Cited by 169
Françon, H., Wang, Z., Marais, A., Mystek, K., Piper, A., Granberg, H., Malti, A., Gatenholm, P., Larsson, P. A., & Wågberg, L. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909383 · Cited by 166
Foroughi, F., Ghomi, E. R., Dehaghi, F. M., Borayek, R., & Ramakrishna, S. (2021) · Materials · doi:10.3390/ma14040714 · Cited by 173
Luo, Q., Shen, H., Zhou, G., & Xu, X. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.120449 · Cited by 163
Nuruddin, M., Hosur, M. V., Uddin, M., Baah, D. A., & Jeelani, S. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42990 · Cited by 163
Jiang, F., & Hsieh, Y.-L. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01123 · Cited by 158
Cellulose nanofibers/reduced graphene oxide flexible transparent conductive paper
Gao, K., Shao, Z., Wu, X., Wang, X., Li, J., Zhang, Y., Wang, W., & Wang, F. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.03.067 · Cited by 159
“…Preparation of cellulose nanofibers dispersion 120 CNFs were prepared according to the literature methodology reported by Isogai121 (Saito et al., 2006), and described in brief as follows: cellulose fibers (2 g) were122 suspended in water (400 ml) containing TEMPO (0.033 g) and…”
MethodInfluentialRelationship between aspect ratio and suspension viscosity of wood cellulose nanofibers
Iwamoto, S., Lee, S. H., & Endo, T. (2013) · Polymer Journal · doi:10.1038/pj.2013.64 · Cited by 163
Liquid Exfoliated Natural Silk Nanofibrils: Applications in Optical and Electrical Devices
Ling, S., Li, C., Jin, K., Kaplan, D. L., & Buehler, M. J. (2016) · Advanced Materials · doi:10.1002/adma.201601783 · Cited by 159
Natural Cellulose Nanofibers As Sustainable Enhancers in Construction Cement
Li, J., Su, M., Chen, L., Wang, Y., Zhu, H., & Dai, H. (2016) · PLoS ONE · doi:10.1371/journal.pone.0168422 · Cited by 161
Preparation of cellulose nanofibers using green and sustainable chemistry
Isogai, A., & Bergström, L. (2018) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2018.04.008 · Cited by 161
Self-citationSakuma, W., Yamasaki, S., Fujisawa, S., Kodama, T., Shiomi, J., Kanamori, K., & Saito, T. (2021) · ACS Nano · doi:10.1021/acsnano.0c08769 · Cited by 155
Self-citationChen, P., Yu, H., Li, P., Chen, W., Wang, X., & Ouyang, M. (2013) · Cellulose · doi:10.1007/s10570-012-9829-7 · Cited by 165
“These methods include grinding (Abe et al. 2007; Nogi et al. 2009), cryocrushing (Chakraborty et al. 2005), TEMPO-mediated oxidation (Saito et al. 2006, 2007; Isogai et al. 2011), sulfuric acid hydrolysis (Beck-Candanedo et al. 2005; Elazzouzi-Hafraoui et al. 2007), and enzyme-assisted hydrolysis…”
MethodAsymmetric ionic aerogel of biologic nanofibrils for harvesting electricity from moisture
Yang, W., Li, X., Han, X., Zhang, W., Wang, Z., Ma, X., Li, M., & Li, C. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104610 · Cited by 153
Hirota, M., Tamura, N., Saito, T., & Isogai, A. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.04.012 · Cited by 184
Self-citationElectrically conductive lines on cellulose nanopaper for flexible electrical devices
Hsieh, M.-C., Kim, C., Nogi, M., & Suganuma, K. (2013) · Nanoscale · doi:10.1039/c3nr01951a · Cited by 152
Sehaqui, H., Kulasinski, K., Pfenninger, N., Zimmermann, T., & Tingaut, P. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b01548 · Cited by 156
Mao, Y., Liu, K., Zhan, C., Geng, L., Chu, B., & Hsiao, B. S. (2017) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.6b11425 · Cited by 156
Singla, R., Soni, S., Kulurkar, P. M., Kumari, A., S., M., Patial, V., Padwad, Y. S., & Yadav, S. K. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.08.065 · Cited by 136
Ma, Y., Lu, Y. Q., Yue, Y., He, S., Jiang, S., Mei, C., Xu, X., Wu, Q., Xiao, H., & Han, J. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122067 · Cited by 150
Yang, J., Xie, H., Chen, H., Shi, Z., Wu, T., Yang, Q., & Xiong, C. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta08188j · Cited by 149
High thermal stability of optical transparency in cellulose nanofiber paper
Nogi, M., Kim, C., Sugahara, T., Inui, T., Takahashi, T., & Suganuma, K. (2013) · Applied Physics Letters · doi:10.1063/1.4804361 · Cited by 149
Biomimetic Inks Based on Cellulose Nanofibrils and Cross-Linkable Xylans for 3D Printing
Markstedt, K., Escalante, A., Toriz, G., & Gatenholm, P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13400 · Cited by 143
Nasir, M., Hashim, R., Sulaiman, O., & Asim, M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00011-5 · Cited by 158
Wu, B., Zhu, G., Dufresne, A., & Lin, N. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b02754 · Cited by 149
Josset, S., Orsolini, P., Siqueira, G. D. F., Tejado, Á., Tingaut, P., & Zimmermann, T. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p167-175 · Cited by 155
Rohaizu, R., & Wanrosli, W. D. (2016) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2016.06.040 · Cited by 153
Li, V. C. F., Mulyadi, A., Dunn, C. K., Deng, Y., & Qi, H. J. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03439 · Cited by 145
Understanding the Mechanistic Behavior of Highly Charged Cellulose Nanofibers in Aqueous Systems
Geng, L., Mittal, N., Zhan, C., Ansari, F., Sharma, P. R., Peng, X., Hsiao, B. S., & Söderberg, D. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02642 · Cited by 149
Utilization of discarded crop straw to produce cellulose nanofibrils and their assemblies
Miao, X., Lin, J., & Bian, F. (2020) · Journal of Bioresources and Bioproducts · doi:10.1016/j.jobab.2020.03.003 · Cited by 150
Nanocellulose: From an agricultural waste to a valuable pharmaceutical ingredient
Kamel, R., El‐Wakil, N. A., Dufresne, A., & ElKasabgy, N. A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.242 · Cited by 152
Zhou, M. R., Chen, D., Chen, Q., Chen, P., Song, G., & Chang, C. (2024) · Advanced Materials · doi:10.1002/adma.202312220 · Cited by 171
Tanaka, R., Saito, T., & Isogai, A. (2012) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2012.05.016 · Cited by 159
Self-citationAfra, E., Yousefi, H., Hadilam, M. M., & Nishino, T. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.05.032 · Cited by 144
Preparation of Nanocellulose: A Review
Islam, M. T., Alam, M. M., Patrucco, A., Montarsolo, A., & Zoccola, M. (2014) · AATCC Journal of Research · doi:10.14504/ajr.1.5.3 · Cited by 161
Srithep, Y., Ellingham, T., Peng, J., Sabo, R. C., Clemons, C. C., Turng, L., & Pilla, S. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.05.006 · Cited by 145
“NFC was prepared according to a procedure described by Saito and Isogai [15].”
MethodOn the toxicity of cellulose nanocrystals and nanofibrils in animal and cellular models
Ventura, C., Pinto, F., Lourenço, A. F., Ferreira, P. J., Louro, H., & Silva, M. J. (2020) · Cellulose · doi:10.1007/s10570-020-03176-9 · Cited by 141
Chinga‐Carrasco, G. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00053 · Cited by 142
Rol, F., Karakashov, B., Nechyporchuk, O., Terrien, M., Meyer, V., Dufresne, A., Belgacem, M. N., & Bras, J. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00630 · Cited by 142
Liu, S., Low, Z.-X. N., Xie, Z., & Wang, H. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202001180 · Cited by 142
Shimizu, M., Saito, T., Fukuzumi, H., & Isogai, A. (2014) · Biomacromolecules · doi:10.1021/bm501329v · Cited by 153
Self-citationPreparing printable bacterial cellulose based gelatin gel to promote in vivo bone regeneration
Wang, X., Tang, S., Chai, S., Wang, P., Qin, J., Pei, W., Bian, H., Jiang, Q. Y., & Huang, C. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118342 · Cited by 141
Syverud, K., Pettersen, S. R., Draget, K. I., & Chinga‐Carrasco, G. (2014) · Cellulose · doi:10.1007/s10570-014-0470-5 · Cited by 136
“CNF were produced using 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO) and sodium bromide (NaBr) to catalyze the oxidation of primary alcohol groups with NaClO (3.8 mmol g-1 cellulose; Saito et al. 2006).”
MethodInfluentialCrystallite Size Effect on Thermal Conductive Properties of Nonwoven Nanocellulose Sheets
Uetani, K., Okada, T., & Oyama, H. T. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00617 · Cited by 143
Recent advances of nanocellulose in drug delivery systems
Hasan, N., Rahman, L., Kim, S.-H., Cao, J., Arjuna, A., Lallo, S., Jhun, B. H., & Yoo, J. (2020) · Journal of Pharmaceutical Investigation · doi:10.1007/s40005-020-00499-4 · Cited by 142
Nanocellulose aerogel for highly efficient adsorption of uranium (VI) from aqueous solution
Wang, Y., Li, Y., Zhang, Y., Zhang, Z., Li, Y., & Li, W. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118233 · Cited by 136
Gao, K., Shao, Z., Wang, X., Zhang, Y., Wang, W., & Wang, F. (2013) · RSC Advances · doi:10.1039/c3ra42050g · Cited by 136
Grafting of Polycaprolactone on Oxidized Nanocelluloses by Click Chemistry
Benkaddour, A., Jradi, K., Robert, S., & Daneault, C. (2013) · Nanomaterials · doi:10.3390/nano3010141 · Cited by 128
“[6], 4 g of never-dried kraft pulp was suspended in water containing 0.”
BackgroundResultNecessity of enzymatic hydrolysis for production and functionalization of nanocelluloses
Karim, Z., Afrin, S., Husain, Q., & Danish, R. (2016) · Critical Reviews in Biotechnology · doi:10.3109/07388551.2016.1163322 · Cited by 141
ABOUZEID, R. E., Dacrory, S., Ali, K. A. K., & Kamel, S. M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.07.127 · Cited by 139
Geng, S., Wei, J., Jonasson, S., Hedlund, J., & Oksman, K. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b19955 · Cited by 136
Capturing colloidal nano- and microplastics with plant-based nanocellulose networks
Leppänen, I., Lappalainen, T., Lohtander, T., Jonkergouw, C., Arola, S., & Tammelin, T. (2022) · Nature Communications · doi:10.1038/s41467-022-29446-7 · Cited by 142
“We used native CNF 27 and TEMPO-oxidized CNF 29 (Supplementary Fig.”
MethodDisplays from Transparent Films of Natural Nanofibers
Nakagaito, A. N., Nogi, M., & Yano, H. (2010) · MRS Bulletin · doi:10.1557/mrs2010.654 · Cited by 134
Recyclable deep eutectic solvent for the production of cationic nanocelluloses
Li, P., Sirviö, J. A., Asante, B., & Liimatainen, H. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.07.024 · Cited by 136
Mechanical Properties of Composite Hydrogels of Alginate and Cellulose Nanofibrils
Aarstad, O. A., Heggset, E. B., Pedersen, I. S., Bjørnøy, S. H., Syverud, K., & Strand, B. L. (2017) · Polymers · doi:10.3390/polym9080378 · Cited by 143
“Production of the second type (referred to as oxidized CNF) was performed using TEMPO-mediated oxidation as pretreatment, as described by Saito and colleagues [11].”
MethodThermal conductivity analysis and applications of nanocellulose materials
Uetani, K., & Hatori, K. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1390692 · Cited by 140
A review on cationic starch and nanocellulose as paper coating components
Sharma, M., Aguado, R. J., Murtinho, D., Valente, A. J. M., de Sousa, A. P. M., & Ferreira, P. J. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.06.131 · Cited by 141
Cationic nanofibrillar cellulose with high antibacterial properties
Chaker, A., & Boufi, S. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.06.003 · Cited by 132
Water redispersible cellulose nanofibrils adsorbed with carboxymethyl cellulose
Butchosa, N., & Zhou, Q. (2014) · Cellulose · doi:10.1007/s10570-014-0452-7 · Cited by 139
Ghanadpour, M., Wicklein, B., Carosio, F., & Wågberg, L. (2018) · Nanoscale · doi:10.1039/c7nr09243a · Cited by 131
Extraction and characterization of nanocellulose crystals from cotton gin motes and cotton gin waste
Jordan, J. H., Easson, M. W., Dien, B. S., Thompson, S. R., & Condon, B. (2019) · Cellulose · doi:10.1007/s10570-019-02533-7 · Cited by 132
Visanko, M., Liimatainen, H., Sirviö, J. A., Heiskanen, J. P., Niinimäki, J., & Hormi, O. E. O. (2014) · Biomacromolecules · doi:10.1021/bm500628g · Cited by 134
Zhou, T., Cheng, X., Pan, Y., Li, C., & Gong, L. (2018) · Cellulose · doi:10.1007/s10570-018-2179-3 · Cited by 133
Saarikoski, E., Saarinen, T., Salmela, J., & Seppälä, J. V. (2012) · Cellulose · doi:10.1007/s10570-012-9661-0 · Cited by 148
Nanomaterials Derived from Fungal Sources─Is It the New Hype?
Nawawi, W. M. F. W., Jones, M. P., Murphy, R., Lee, K., Kontturi, E., & Bismarck, A. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b01141 · Cited by 139
Rheology in Product Development: An Insight into 3D Printing of Hydrogels and Aerogels
Barrulas, R. V., & Corvo, M. C. (2023) · Gels · doi:10.3390/gels9120986 · Cited by 158
“TEMPO oxidation of CNF increased the negative repulsive charge between fibres, which could be counteracted by high-pressure homogenisation [126–130].”
BackgroundSang, C., Wang, S., Jin, X., Cheng, X., Xiao, H., Yue, Y., & Han, J. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.121947 · Cited by 129
TEMPO-Oxidized Cellulose Nanofibrils Dispersed in Organic Solvents
Okita, Y., Fujisawa, S., Saito, T., & Isogai, A. (2010) · Biomacromolecules · doi:10.1021/bm101255x · Cited by 141
Self-citationCellulose nanofibrils: a rapid adsorbent for the removal of methylene blue
Chan, C. H., Chia, C. H., Zakaria, S., Sajab, M. S., & Chin, S. X. (2015) · RSC Advances · doi:10.1039/c4ra15754k · Cited by 133
Bio-inspired functional wood-based materials – hybrids and replicates
Burgert, I., Cabane, É., Zollfrank, C., & Berglund, L. A. (2015) · International Materials Reviews · doi:10.1179/1743280415y.0000000009 · Cited by 135
Wang, R., Chen, L., Zhu, J. Y., & Yang, R. (2017) · ChemNanoMat · doi:10.1002/cnma.201700015 · Cited by 132
Yang, X., & Berglund, L. A. (2020) · Advanced Materials · doi:10.1002/adma.202001118 · Cited by 135
Yadav, C., Saini, A., Zhang, W., You, X., Chauhan, I., Mohanty, P., & Li, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.11.038 · Cited by 130
Veigel, S., Müller, U., Kečkéš, J., Obersriebnig, M., & Gindl‐Altmutter, W. (2011) · Cellulose · doi:10.1007/s10570-011-9576-1 · Cited by 133
“The fibril diameters obtained in this study seem rather high when compared to the results of previous studies (Saito et al. 2006, 2009; Iwamoto et al. 2010).”
Petroudy, S. R. D., Syverud, K., Chinga‐Carrasco, G., Ghasemain, A., & Resalati, H. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.07.073 · Cited by 126
Vallejos, M. E., Felissia, F. E., Área, M. C., Ehman, N. V., Tarrés, Q., & Mutjé, P. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.12.004 · Cited by 132
Research in porous structure of cellulose aerogel made from cellulose nanofibrils
Gong, C., Ni, J., Tian, C., & Su, Z. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.01.080 · Cited by 126
The Colloidal Properties of Nanocellulose
Benselfelt, T., Kummer, N., Nordenström, M., Fall, A. B., Nyström, G., & Wågberg, L. (2023) · ChemSusChem · doi:10.1002/cssc.202201955 · Cited by 133
TEMPO-oxidized cellulose nanofibrils prepared from various plant holocelluloses
Kuramae, R., Saito, T., & Isogai, A. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.06.011 · Cited by 134
Self-citationLing, Z., Edwards, J. V., Guo, Z., Prevost, N. T., Nam, S., Wu, Q., French, A. D., & Xu, F. (2018) · Cellulose · doi:10.1007/s10570-018-2092-9 · Cited by 130
Wang, X., Gao, K., Shao, Z., Peng, X., Wu, X., & Wang, F. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.130 · Cited by 128
Dimic-Misic, K., Gane, P. A. C., & Paltakari, J. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4028878 · Cited by 133
Superior Flame-Resistant Cellulose Nanofibril Aerogels Modified with Hybrid Layer-by-Layer Coatings
Köklükaya, O., Carosio, F., & Wågberg, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08018 · Cited by 126
“mechanical treatments,(7) carboxymethylation,(8) and TEMPO oxidation.(9) All these different types”
BackgroundGoi, Y., Fujisawa, S., Saito, T., Yamane, K., Kuroda, K., & Isogai, A. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b01977 · Cited by 124
Self-citationJiang, Z., & Ngai, T. (2022) · Polymers · doi:10.3390/polym14081533 · Cited by 125
Guigo, N., Mazeau, K., Putaux, J., & Heux, L. (2014) · Cellulose · doi:10.1007/s10570-014-0459-0 · Cited by 123
“This surface oxidation has demonstrated a remarkable stabilizing effect to prevent the microfibrils from flocculating when dispersed in aqueous suspensions (Saito et al. 2006).”
BackgroundSelf-citationBarrier coatings with various types of cellulose nanofibrils and their barrier properties
Yook, S., Park, H., Park, H., Lee, S.-Y., Kwon, J., & Youn, H. J. (2020) · Cellulose · doi:10.1007/s10570-020-03061-5 · Cited by 124
Ma, L., Zhu, Y., Huang, Y., Zhang, L., & Wang, Z. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.119083 · Cited by 123
Reduction of water wettability of nanofibrillated cellulose by adsorption of cationic surfactants
Xhanari, K., Syverud, K., Chinga‐Carrasco, G., Paso, K. G., & Stenius, P. J. (2010) · Cellulose · doi:10.1007/s10570-010-9482-y · Cited by 140
“Assuming that the weak acid groups are predominantly carboxylic groups formed during TEMPOmediated oxidation (Saito et al. 2006), the degree of oxidation (DO) (i.”
BackgroundMethodInfluentialOne-shot TEMPO-periodate oxidation of native cellulose
Mendoza, D. J., Browne, C., Raghuwanshi, V. S., Simon, G. P., & Garnier, G. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115292 · Cited by 127
Huang, Y., Zhou, T., He, S., Xiao, H., Dai, H., Yuan, B., Chen, X., & Yang, X. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.143775 · Cited by 121
Fukuzumi, H., Saito, T., Iwamoto, S., Kumamoto, Y., Ohdaira, T., Suzuki, R., & Isogai, A. (2011) · Biomacromolecules · doi:10.1021/bm201079n · Cited by 135
Self-citationNordli, H. R., Chinga‐Carrasco, G., Rokstad, A. M., & Pukstad, B. S. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.04.094 · Cited by 121
Comparative study of aramid nanofiber (ANF) and cellulose nanofiber (CNF)
Yang, B., Zhang, M., Lu, Z., Tan, J., Luo, J., Song, S., Ding, X., Wang, L., Lü, P., & Zhang, Q. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.12.086 · Cited by 125
Wood cellulose nanofibrils prepared by TEMPO electro-mediated oxidation
Isogai, T., Saito, T., & Isogai, A. (2011) · Cellulose · doi:10.1007/s10570-010-9484-9 · Cited by 111
“TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidation of native celluloses is a unique method to prepare mostly individual cellulose nanofibrils with high aspect ratios dispersed in water by lower disintegration energies, in which anionically charged sodium C6-carboxylate groups are selectively forme…”
MethodSelf-citationVersatile Gas-Phase Reactions for Surface to Bulk Esterification of Cellulose Microfibrils Aerogels
Fumagalli, M., Ouhab, D., Molina-Boisseau, S., & Heux, L. (2013) · Biomacromolecules · doi:10.1021/bm400864z · Cited by 123
Cellulose: To depolymerize… or not to?
Coseri, S. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2017.01.002 · Cited by 128
Metadata
- Authors
- Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Corresponding author
- Nishiyama, Yoshiharu
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-05-03
- Volume
- 7
- Issue
- 6
- Pages
- 1687-1691
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2020375047
- Cited by
- 1,796
- References
- 21
- Citations by year
- 2026: 57 · 2025: 72 · 2024: 85 · 2023: 102 · 2022: 135 · 2021: 125 · 2020: 141 · 2019: 133 · 2018: 142 · 2017: 137 · 2016: 120 · 2015: 100 · 2014: 111 · 2013: 96 · 2012: 76
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Keywords
- TEMPO-mediated oxidation, cellulose microfibrils, homogeneous suspensions, cotton cellulose, tunicin, bacterial cellulose, oxidation degree, sodium hypochlorite, sonication, mechanical homogenization
- MeSH terms
- Catalysis, Cellulose, Cyclic N-Oxides, Oxidation-Reduction, Particle Size, Suspensions, Microfibrils
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.