Homogeneous Suspensions of Individualized Microfibrils from TEMPO-Catalyzed Oxidation of Native Cellulose
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Never-dried native celluloses (bleached sulfite wood pulp, cotton, tunicin, and bacterial cellulose) were disintegrated into individual microfibrils after oxidation mediated by the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical followed by a homogenizing mechanical treatment. When oxidized with 3.6 mmol of NaClO per gram of cellulose, almost the totality of sulfite wood pulp and cotton were readily disintegrated into long individual microfibrils by a treatment with a Waring Blendor, yielding transparent and highly viscous suspensions. When observed by transmission electron microscopy, the wood pulp and cotton microfibrils exhibited a regular width of 3-5 nm. Tunicin and bacterial cellulose could be disintegrated by sonication. A bulk degree of oxidation of about 0.2 per one anhydroglucose unit of cellulose was necessary for a smooth disintegration of sulfite wood pulp, whereas only small amounts of independent microfibrils were obtained at lower oxidation levels. This limiting degree of oxidation decreased in the following order: sulfite wood pulp > cotton > bacterial cellulose, tunicin.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [85]
Citations
Cites
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., & Isogai, A. (2004) · Biomacromolecules · doi:10.1021/bm0497769 · Cited by 1,292
Self-citationPolymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766
Liquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
The structure and mechanical properties of sheets prepared from bacterial cellulose
Yamanaka, S., Watanabe, K., Kitamura, N., Iguchi, M., Mitsuhashi, S., Nishi, Y., & Uryu, M. (1989) · Journal of Materials Science · doi:10.1007/bf01139032 · Cited by 612
Combined infrared and electron diffraction study of the polymorphism of native celluloses
Sugiyama, J., Persson, J., & Chanzy, H. (1991) · Macromolecules · doi:10.1021/ma00009a050 · Cited by 541
de Nooy, A. E. J., Besemer, A. C., & van Bekkum, H. (1995) · Carbohydrate Research · doi:10.1016/0008-6215(94)00343-e · Cited by 471
Preparation of Polyuronic Acid from Cellulose by TEMPO-mediated Oxidation
Isogai, A., & Kato, Y. (1998) · Cellulose · doi:10.1023/a:1009208603673 · Cited by 437
Self-citationCellulose Biosynthesis: Current Views and Evolving Concepts
SAXENA, I. M., & BROWN, R. M. (2005) · Annals of Botany · doi:10.1093/aob/mci155 · Cited by 424
Research works printed but not linked: 5
- Lepoutre P., 1974, TAPPI, 57, 87
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Saito T., 2005, TAPPI J., 4, 3
- Saito, T.; Okita, Y.; Nge, T. T.; Sugiyama, J.; Isogai, A. Carbohydr. Polym. , in press.
Cited by
Items 801–900 of 1,002
Sarangi, P. K., Srivastava, R. K., Sahoo, U. K., Singh, A. K., Parikh, J. K., Bansod, S. P., Parsai, G., Luqman, M., Shadangi, K. P., Diwan, D., et al. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.140833 · Cited by 37
Preparation of amidated derivatives of carboxymethylcellulose
Taubner, T., Synytsya, A., & Čopı́ková, J. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.07.049 · Cited by 36
Characteristics of microfibrillated cellulosic fibers and paper sheets from Korean white pine
Jang, J., Lee, S. H., Endo, T., & Kim, N. (2013) · Wood Science and Technology · doi:10.1007/s00226-013-0543-x · Cited by 36
“lignocellulosic cell wall have used chemical or enzyme pretreatments prior to mechanical fibrillation to enhance the effect of fibrillation and reduce energy consumption (Hassan et al. 2010; Isogai et al. 2011; Saito et al. 2006; Wang and Sain 2007; Zuluaga et al. 2009).”
MethodWu, G., Liu, G., Chen, J., & Kong, Z. (2017) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2016.10.031 · Cited by 39
Synthesis and utilization of natural fiber-reinforced poly (lactic acid) bionanocomposites
Ghalia, M. A., & Dahman, Y. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100959-8.00015-9 · Cited by 45
Agricultural crop residue as a source for the production of cellulose nanofibrils
Boufi, S. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00006-1 · Cited by 36
Tang, R., Yu, Z., Renneckar, S. H., & Zhang, Y. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.08.097 · Cited by 36
Cellulose nanofiber nanocomposites with aligned silver nanoparticles
Ito, H., Sakata, M., Hongo, C., Matsumoto, T., & Nishino, T. (2018) · Nanocomposites · doi:10.1080/20550324.2018.1556912 · Cited by 37
Silva, F., Gracia-Vallés, N., McDonagh, B. H., Domingues, F., Nerín, C., & Chinga‐Carrasco, G. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03759-3 · Cited by 36
“The pulp fibres were chemically pre-treated with (2,2,6,6-tetramethylpiperidinyl-1-yl)oxyl (TEMPO)-mediated oxidation [4], using 3.”
MethodReyes, G., Lundahl, M. J., Alejandro-Martín, S., Arteaga-Pérez, L. E., Oviedo, C., King, A. W. T., & Rojas, O. J. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.9b01559 · Cited by 37
Gu, F., & Liu, H. (2020) · CHINESE JOURNAL OF CATALYSIS (CHINESE VERSION) · doi:10.1016/s1872-2067(20)63569-0 · Cited by 36
Chen, H., Jiang, J., Zhang, S., Yu, J., Liu, L., & Fan, Y. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.114295 · Cited by 36
Fabrication of transparent paper devices from nanocellulose fiber
Dinesh, G., & Kandasubramanian, B. (2022) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2022.125707 · Cited by 38
Loranger, É., Piché, A.-O., & Daneault, C. (2012) · Nanomaterials · doi:10.3390/nano2030286 · Cited by 36
Reinforcing effect of carboxymethylated nanofibrillated cellulose powder on hydroxypropyl cellulose
Eyholzer, C., López-Suevos, F., Tingaut, P., Zimmermann, T., & Oksman, K. (2010) · Cellulose · doi:10.1007/s10570-010-9423-9 · Cited by 40
“In order to enhance disintegration rate and lower energy consumption, chemical (Wågberg et al. 1987; Saito et al. 2006) and enzymatic (Pääkkö et al. 2007) pretreatments were applied.”
BackgroundOne-Step Production of Amphiphilic Nanofibrillated Cellulose Using a Cellulose-Producing Bacterium
Tajima, K., Kusumoto, R., Kose, R., Kono, H., Matsushima, T., Isono, T., Yamamoto, T., & Satoh, T. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b01100 · Cited by 38
Advanced Cellulosic Materials Toward High‐Performance Metal Ion Batteries
Wei, J., Ma, Q., Teng, Y., Yang, T., Wong, K. H., Cui, Y., Zheng, B., Li, D., Luo, D., & Yu, A. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202400208 · Cited by 36
Egusa, S., Yokota, S., Tanaka, K. K., Esaki, K., Okutani, Y., Ogawa, Y., Kitaoka, T., Goto, M., & Wariishi, H. (2009) · Journal of Materials Chemistry · doi:10.1039/b819025a · Cited by 35
Hamou, K. B., Kaddami, H., Dufresne, A., Boufi, S., Magnin, A., & Erchiqui, F. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.043 · Cited by 38
Courtenay, J. C., Ramalhete, S. M., Skuze, W. J., Soni, R., Khimyak, Y. Z., Edler, K. J., & Scott, J. L. (2017) · Soft Matter · doi:10.1039/c7sm02113e · Cited by 36
Lal, S. S., & Mhaske, S. T. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.03.011 · Cited by 35
Fukui, S., Ito, T., Saito, T., Noguchi, T., & Isogai, A. (2018) · Cellulose · doi:10.1007/s10570-018-2107-6 · Cited by 35
Self-citationZhang, C., Chen, G., Wang, X., Zhou, S., Yu, J., Feng, X., Li, L., Chen, P., & Qi, H. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c19099 · Cited by 36
Rissanen, V., Vajravel, S., Kosourov, S. N., Arola, S., Kontturi, E., Allahverdiyeva, Y., & Tammelin, T. (2021) · Green Chemistry · doi:10.1039/d1gc00502b · Cited by 35
An overview of Zn/ZnO modified cellulosic nanocomposites and their potential applications
Wasim, M., Shi, F., Liu, J., Farooq, A., Khan, S. U., Salam, A., Hassan, T., & Zhao, X. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02689-6 · Cited by 35
“Similarly, TEMPO oxidized CNFs have been obtained by TEMPO-oxidation method joined with adequate mechanical-disintegration [81, 85].”
MethodHydrophobic and Flame-Retardant Foam Based on Cellulose
Kader, A. H. A., Dacrory, S., Khattab, T. A., Kamel, S. M., & Abou‐Yousef, H. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02355-4 · Cited by 35
“Recently, the flame retardant properties of cellulose-based freeze casting foam have been enhanced by TEMPO modification of cellulose substrate in blending with boric acid and sepiolite clay (a microfibrous magnesium silicate) [18].”
BackgroundRaucci, A., Miglione, A., Lenzi, L., Fabbri, P., Tocco, J. D., Massaroni, C., Presti, D. L., Schena, E., Pifferi, V., Falciola, L., et al. (2022) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2022.133178 · Cited by 35
Zhang, K., Fischer, S., Geißler, A., & Brendler, E. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.090 · Cited by 35
Studies of the chemoenzymatic modification of cellulosic pulps by the laccase-TEMPO system
Patel, I., Ludwig, R., Haltrich, D., Rosenau, T., & Potthast, A. (2011) · Holzforschung · doi:10.1515/hf.2011.035 · Cited by 35
Nanocellulose—fabrication, structure, properties, and application in the area of care and cure
Ioelovich, M. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-41533-0.00009-x · Cited by 40
Shih, Y., Chou, M.-Y., Chang, W.-C., Lian, H., & Chen, C. (2017) · Journal of Polymer Research · doi:10.1007/s10965-017-1367-4 · Cited by 39
de Souza, S. F., Mariano, M., de Farias, M. A., & Bernardes, J. S. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.11.096 · Cited by 35
Zhang, Z., Mao, H., Kong, Y., Niu, P., Zheng, J., Liu, P., Wang, W., Li, Y., & Yang, X. (2023) · Small · doi:10.1002/smll.202305924 · Cited by 38
Biomass‐based functional separators for rechargeable batteries
Xia, Y., Wang, L., Li, X., Liao, T., Zhai, J., Wang, X., & Huo, K. (2024) · Battery energy · doi:10.1002/bte2.20240015 · Cited by 36
The non-trivial role of native xylans on the preparation of TEMPO-oxidized cellulose nanofibrils
Meng, Q., Li, H., Fu, S., & Lucia, L. A. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.07.021 · Cited by 38
Zhou, H., John, F. J. S., & Zhu, J. Y. (2019) · Cellulose · doi:10.1007/s10570-019-02250-1 · Cited by 36
Surface-Carboxylated Nanocellulose-Based Bioadaptive Scaffolds for Cell Culture
Hatakeyama, M., & Kitaoka, T. (2021) · Cellulose · doi:10.1007/s10570-021-04154-5 · Cited by 36
Novel spider-web-like nanoporous networks based on jute cellulose nanowhiskers
Cao, X., Wang, X., Ding, B., Yu, J., & Sun, G. Z. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.11.085 · Cited by 34
High-performance H2S detection by redox reactions in semiconducting carbon nanotube-based devices
Jung, H. Y., Kim, Y. L., Park, S.-R., Datar, A., Lee, H., Huang, J., Somu, S., BUSNAINA, A. A., Jung, Y. J., & Kwon, Y. (2013) · The Analyst · doi:10.1039/c3an01762a · Cited by 34
Cellulose nanofibrils as templates for the design of poly(l-lactide)-nucleating surfaces
Fujisawa, S., Zhang, J., Saito, T., Iwata, T., & Isogai, A. (2014) · Polymer · doi:10.1016/j.polymer.2014.04.019 · Cited by 34
Self-citationJiang, Y., Zhao, Y., Feng, X., Fang, J., & Shi, L. (2015) · RSC Advances · doi:10.1039/c5ra17242j · Cited by 34
Chen, G., Yu, H., Zhang, C., Zhou, Y., & Yao, J. (2016) · Journal of Nanoparticle Research · doi:10.1007/s11051-016-3355-8 · Cited by 35
Preparation of photoreactive nanocellulosic materials via benzophenone grafting
Orelma, H., Vuoriluoto, M., Johansson, L., Campbell, J. M., Filpponen, I., Biesalski, M., & Rojas, O. J. (2016) · RSC Advances · doi:10.1039/c6ra15015b · Cited by 35
Polypyrrole/cellulose nanofiber aerogel as a supercapacitor electrode material
Niu, Q., Guo, Y., Gao, K., & Shao, Z. (2016) · RSC Advances · doi:10.1039/c6ra23216g · Cited by 34
Cellulose nanocrystals modified with quaternary ammonium salts and its reinforcement of polystyrene
Yin, Y., Hong, Z., Tian, X., Zhu, Q., Jiang, X., Wang, H., & Gao, W. (2017) · Polymer Bulletin · doi:10.1007/s00289-017-2131-y · Cited by 35
“TEMPO-oxidized cellulose nanocrystals (TOCNC) were prepared using the TEMPO/NaBr/NaClO system in water at pH 10, according to the previous method [33], about 2 g of cellulose nanocrystals was suspended in 200 mL water containing 0.”
MethodPrakobna, K., Berthold, F., Medina, L., & Berglund, L. A. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.023 · Cited by 35
Wang, L., Shen, H., Zhang, H., Xu, D., & Zhou, J. (2024) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2024.173505 · Cited by 33
Azrak, S. M. E. A., Clarkson, C. M., Moon, R. J., Schueneman, G. T., & Youngblood, J. P. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b00635 · Cited by 34
Dai, Q., Yuan, B., Guo, M., Zhang, K., Chen, X., Song, Z., Nguyen, T. T., Wang, X., Lin, S., Fan, J., et al. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.02.096 · Cited by 34
Navarro, J. R. G., Rostami, J., Ahlinder, A., Mietner, J. B., Bernin, D., Saake, B., & Edlund, U. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00210 · Cited by 33
Non-volatile conductive gels made from deep eutectic solvents and oxidised cellulose nanofibrils
Bryant, S. J., da Silva, M. A., Hossain, K. M. Z., Calabrese, V., Scott, J. L., & Edler, K. J. (2021) · Nanoscale Advances · doi:10.1039/d0na00976h · Cited by 33
Yuan, B., Guo, M., Huang, Z., Naik, N., Hu, Q., & Guo, Z. (2021) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2021.106440 · Cited by 33
Mao, H. Z., Niu, P., Zhang, Z., Kong, Y., Wang, W., & Yang, X. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120881 · Cited by 33
Voltammetric optimisation of TEMPO-mediated oxidations at cellulose fabric
Jin, Y. H., Edler, K. J., Marken, F., & Scott, J. L. (2014) · Green Chemistry · doi:10.1039/c4gc00306c · Cited by 36
Ru, J., Tong, C., Chen, N., Shan, P., Zhao, X., Liu, X., Chen, J., Li, Q., Liu, X., Liu, H., et al. (2018) · Cellulose · doi:10.1007/s10570-018-2146-z · Cited by 36
Dimić‐Mišić, K., Salo, T., Paltakari, J., & Gane, P. A. C. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-02-p253-270 · Cited by 33
“The difference in bound water between MFC and NFC should strongly influence their respective rheology and dewatering behaviour (Horvath, Lindström 2007, Dimic-Misic et al. 2013a, Salmi et al. 2007).”
BackgroundFukui, S., Ito, T., Saito, T., Noguchi, T., & Isogai, A. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.08.023 · Cited by 32
Self-citationSilva-Carvalho, R., Silva, J. P., Ferreirinha, P., Leitão, A. F., Andrade, F. K., da Costa, R. M. G., Cristelo, C., Rosa, M. D. F., Vilanova, M., & Gama, M. (2019) · Toxicological Research · doi:10.5487/tr.2019.35.1.045 · Cited by 32
“Nevertheless, other complex processes of nanofibrils production described in the literature, requiring higher energy and time, have also failed to achieve homogeneity (64-66).”
Broadband terahertz spectroscopy of cellulose nanofiber-reinforced polypropylenes
Ariyoshi, S., Hashimoto, S., Ohnishi, S., Negishi, S., Mikami, H., Hayashi, K., Tanaka, S., & Hiroshiba, N. (2020) · Materials Science and Engineering B · doi:10.1016/j.mseb.2020.115000 · Cited by 32
3D Printed Nanocellulose Scaffolds as a Cancer Cell Culture Model System
Rosendahl, J., Svanström, A., Berglin, M., Petronis, Š., Bogestål, Y. R., Stenlund, P., Standoft, S., Ståhlberg, A., Landberg, G., Chinga‐Carrasco, G., et al. (2021) · Bioengineering · doi:10.3390/bioengineering8070097 · Cited by 34
“Carboxylated CNF, produced through 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO)-mediated oxidation [30], has been used in various studies concerning biomedical applications demonstrating benefits for cell viability, proliferation, migration, biocompatibility and cytotoxicity [18,19].”
Yamato, K., Yoshida, Y., Kumamoto, Y., & Isogai, A. (2021) · Cellulose · doi:10.1007/s10570-021-04131-y · Cited by 33
Self-citationSolin, K., Vuoriluoto, M., Khakalo, A., & Tammelin, T. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.120517 · Cited by 32
Liu, Y., Yuan, W., He, Y., Qian, Y., Wang, C., & Chen, G. (2023) · ACS Omega · doi:10.1021/acsomega.2c08239 · Cited by 32
Benkaddour, A., Jradi, K., Robert, S., & Daneault, C. (2013) · Nanomaterials · doi:10.3390/nano3040638 · Cited by 34
“[30,31], it was reported that 2,2,6,6-tetramethylpiperidine-1oxyl(TEMPO)-mediated selective oxidation of primary alcohols of cellulose fibers is an alternate promising route to obtain individualized microfibrils.”
BackgroundResultMalho, J., Ouellet‐Plamondon, C., Rüggeberg, M., Laaksonen, P. H., Ikkala, O. T., Burgert, I., & Linder, M. B. (2014) · Biomacromolecules · doi:10.1021/bm501514w · Cited by 33
Press dewatering and nip rewetting of paper containing nano- and microfibril cellulose
Rantanen, J., & Maloney, T. C. (2013) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2013-28-04-p582-587 · Cited by 32
“The NFC used in the experiments was manufactured by TEMPO-oxidation process similar to the method described by Saito et al. (2006) from once dried bleached birch kraft pulp with NaClO dosage of 5 mmol/g of dry fibres.”
MethodPaajanen, A., Sonavane, Y., Ignasiak, D., Ketoja, J. A., Maloney, T. C., & Paavilainen, S. (2016) · Cellulose · doi:10.1007/s10570-016-1076-x · Cited by 35
“The oxidative treatment of native cellulose by Saito et al. (2006) is an approach which allows the introduction of negatively charged carboxylate groups on the surface of cellulose fibers.”
BackgroundIsobe, N., Kasuga, T., & Nogi, M. (2018) · RSC Advances · doi:10.1039/c7ra12672g · Cited by 32
Effect of Chemical Functionality on the Mechanical and Barrier Performance of Nanocellulose Films
Durán, V. L., Hellwig, J., Larsson, P. T., Wågberg, L., & Larsson, P. T. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b00452 · Cited by 35
Gao, K., Guo, Y., Niu, Q., Fang, H., Zhang, L., Zhang, Y., Wang, L., & Zhou, L. (2018) · Cellulose · doi:10.1007/s10570-018-1899-8 · Cited by 32
“…catalytic oxidation method, retain some of the inherent characteristics of the natural cellulose nanofibers found in the green plants, e.g., a unique nanometer- scale cellulose I crystal structure (approximately 3–4 nm in width and more than a few micrometers in length) (Saito et al. 2006, 2009).”
MethodThermal conduction through individual cellulose nanofibers
Adachi, K., Daicho, K., Furuta, M., Shiga, T., Saito, T., & Kodama, T. (2021) · Applied Physics Letters · doi:10.1063/5.0042463 · Cited by 35
Self-citationCharreau, H., Foresti, M. L., & Vázquez, A. (2012) · Recent Patents on Nanotechnology · doi:10.2174/1872210511307010056 · Cited by 64
“In the last years, enzymatic and chemical pretreatments have been proposed to reduce the energy input of the process [16-18].”
InfluentialChitin and Chitosan Based Blends, Composites and Nanocomposites
Zuber, M., Zia, K. M., & Barikani, M. (2012) · Advanced structured materials · doi:10.1007/978-3-642-20940-6_3 · Cited by 39
Sorvari, A., Saarinen, T., Haavisto, S., Salmela, J., Vuoriluoto, M., & Seppälä, J. V. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.02.032 · Cited by 32
Materials and Methods for All-Cellulose 3D Printing in Sustainable Additive Manufacturing
Albelo, I., Raineri, R., & Salmon, S. (2024) · Sustainable Chemistry · doi:10.3390/suschem5020008 · Cited by 31
“) [39] 60 s (Solvent Evaporation) [35,36] 12 h (Freeze-Drying) [63] 30 min–2 h (Wet Densification) [43] 3 min (UV-Curing) [39] ~200 µ m (MEX) [66,67] 21 µ m (MJT) [43] 27 µ m VPP [39]”
Tian, G., Duan, C., Zhao, B., Yang, K., Guo, J., Wen, Y., Zhou, B., Wang, J., & Ni, Y. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.123622 · Cited by 32
Preparation of Cellulose/Silver Composite Particles Having a Recyclable Catalytic Property
Fujii, Y., Imagawa, K., Omura, T., Suzuki, T., & Minami, H. (2020) · ACS Omega · doi:10.1021/acsomega.9b03634 · Cited by 31
Campodoni, E., Montanari, M., Dozio, S. M., Heggset, E. B., Panseri, S., Montesi, M., Tampieri, A., Syverud, K., & Sandri, M. (2020) · Nanomaterials · doi:10.3390/nano10061219 · Cited by 31
Cruz‐Silva, R., Izu, K., Maeda, J., Saito, S., Morelos‐Gómez, A., Aguilar, C., Takizawa, Y., Yamanaka, A., Tejima, S., Fujisawa, K., et al. (2020) · Nanoscale · doi:10.1039/d0nr02915g · Cited by 31
Self-citationPatterson, G. D., & Hsieh, Y. (2020) · Nanoscale Advances · doi:10.1039/d0na00771d · Cited by 31
Salt-Responsive Pickering Emulsions Stabilized by Functionalized Cellulose Nanofibrils
Courtenay, J. C., Jin, Y. H., Schmitt, J., Hossain, K. M. Z., Mahmoudi, N., Edler, K. J., & Scott, J. L. (2021) · Langmuir · doi:10.1021/acs.langmuir.0c03306 · Cited by 31
Han, X., Zhang, W., Che, X., Long, L., Li, M., & Li, C. (2022) · Journal of Materials Chemistry A · doi:10.1039/d1ta10865d · Cited by 31
Carboxylated cellulose nanocrystal films with tunable chiroptical properties
Fan, W., Li, J., Wei, L., & Xu, Y. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119442 · Cited by 31
Wang, Y., Chen, H., Cui, L., Tu, C., Yan, C., & Guo, Y. (2022) · Cellulose · doi:10.1007/s10570-022-04601-x · Cited by 32
Fu, C., Lin, C., Zhang, W., Lin, Y., Xiu, J., Ni, Y., & Huang, L. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.143516 · Cited by 31
The role of heteropolysaccharides in developing oxidized cellulose nanofibrils
Meng, Q., Fu, S., & Lucia, L. A. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.02.058 · Cited by 31
Dynamic mechanical analysis of layer-by-layer cellulose nanocomposites
Pillai, K. V., & Renneckar, S. H. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.037 · Cited by 31
Preparation and characterization of zinc oxide/TEMPO-oxidized cellulose nanofibril composite films
Ning, R., Wu, C.-N., Takeuchi, M., Saito, T., & Isogai, A. (2017) · Cellulose · doi:10.1007/s10570-017-1480-x · Cited by 32
Self-citationWang, J., Chen, X., Zhang, C., Akbar, A. R., Shi, Z., Yang, Q., & Xiong, C. (2019) · Cellulose · doi:10.1007/s10570-019-02302-6 · Cited by 31
Morphology and Flow Behavior of Cellulose Nanofibers Dispersed in Glycols
Wang, R., Rosén, T., Zhan, C., Chodankar, S., Chen, J., Sharma, P. R., Sharma, S. K., Liu, T., & Hsiao, B. S. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b01036 · Cited by 31
Ampelodesmos mauritanicus a new sustainable source for nanocellulose substrates
Zergane, H., Abdi, S., Xu, H., Hemming, J. E., Wang, X., Willför, S. M., & Habibi, Y. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.112044 · Cited by 31
Role of Surface Chemistry in the In Vitro Lung Response to Nanofibrillated Cellulose
Aimonen, K., Suhonen, S., Hartikainen, M., Lopes, V. R., Norppa, H., Ferraz, N., & Catalán, J. (2021) · Nanomaterials · doi:10.3390/nano11020389 · Cited by 31
“Wood NFC is composed of amorphous and crystalline domains [4] and is characterized by having a high-aspect ratio, with a typical diameter of 2–10 nm and length in the micrometer-scale (>1 μm) [5,6].”
BackgroundNaturally or artificially constructed nanocellulose architectures for epoxy composites: A review
Yu, T., Soomro, S. A., Huang, F., Wei, W., Wang, B., Zhou, Z., & Hui, D. (2020) · Nanotechnology Reviews · doi:10.1515/ntrev-2020-0116 · Cited by 31
“Since the surface of CNFs is negatively charged (–COO), simple stirring in water can make CNFs redispersed if they are agglomerated [44,45], but the thermal stability is reduced to a certain extent [47].”
BackgroundPääkkönen, T., Bertinetto, C. G., Pönni, R., Tummala, G. K., Nuopponen, M., & Vuorinen, T. (2015) · Applied Catalysis A General · doi:10.1016/j.apcata.2015.07.024 · Cited by 31
The vane method and kinetic modeling: shear rheology of nanofibrillated cellulose suspensions
Mohtaschemi, M., Sorvari, A., Puisto, A., Nuopponen, M., Seppälä, J. V., & Alava, M. J. (2014) · Cellulose · doi:10.1007/s10570-014-0409-x · Cited by 31
“Recently, chemical (Saito et al. 2006) or enzymatic (Pääkkö et al. 2007) pretreatments have been developed to introduce new surface properties to the fibers and to enhance the fibrillation process.”
BackgroundMethodCai, Y., Yu, Z., Cheng, L., Yuan, Y. F., Ren, S., Chai, Y., Chen, M., Huang, X., & Li, Y. (2024) · Journal of Materials Chemistry C · doi:10.1039/d4tc01845a · Cited by 30
Petroudy, S. R. D., Ghasemian, A., Resalati, H., Syverud, K., & Chinga‐Carrasco, G. (2014) · Cellulose · doi:10.1007/s10570-014-0504-z · Cited by 30
“Chemical or enzymatic pretreatments facilitate the fibrillation (Turbak et al. 1983; Saito et al. 2006; Pääkkö et al. 2007; Wågberg et al. 2008; Djafari Petroudy et al. 2014).”
BackgroundFunctionalized Cellulose Nanocrystals for Cellular Labeling and Bioimaging
Raja, S., Hamouda, A. E. I., Toledo, M. A. S., Hu, C., Bernardo, M. P., Schalla, C., Leite, L. S. F., Buhl, E. M., Dreschers, S., Pich, A., et al. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c01317 · Cited by 30
Gouda, K., Bhowmik, S., & Das, B. (2021) · REVIEWS ON ADVANCED MATERIALS SCIENCE · doi:10.1515/rams-2021-0024 · Cited by 31
“With the consumption of NaBr and NaOH, the hydroxyl group of natural fibers transferred carboxylate group [146,147].”
BackgroundNanocellulose and Its Interface: On the Road to the Design of Emerging Materials
Bettotti, P., & Scarpa, M. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202101593 · Cited by 33
Metadata
- Authors
- Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Corresponding author
- Nishiyama, Yoshiharu
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-05-03
- Volume
- 7
- Issue
- 6
- Pages
- 1687-1691
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2020375047
- Cited by
- 1,796
- References
- 21
- Citations by year
- 2026: 57 · 2025: 72 · 2024: 85 · 2023: 102 · 2022: 135 · 2021: 125 · 2020: 141 · 2019: 133 · 2018: 142 · 2017: 137 · 2016: 120 · 2015: 100 · 2014: 111 · 2013: 96 · 2012: 76
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Keywords
- TEMPO-mediated oxidation, cellulose microfibrils, homogeneous suspensions, cotton cellulose, tunicin, bacterial cellulose, oxidation degree, sodium hypochlorite, sonication, mechanical homogenization
- MeSH terms
- Catalysis, Cellulose, Cyclic N-Oxides, Oxidation-Reduction, Particle Size, Suspensions, Microfibrils
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.