Homogeneous Suspensions of Individualized Microfibrils from TEMPO-Catalyzed Oxidation of Native Cellulose
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Never-dried native celluloses (bleached sulfite wood pulp, cotton, tunicin, and bacterial cellulose) were disintegrated into individual microfibrils after oxidation mediated by the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical followed by a homogenizing mechanical treatment. When oxidized with 3.6 mmol of NaClO per gram of cellulose, almost the totality of sulfite wood pulp and cotton were readily disintegrated into long individual microfibrils by a treatment with a Waring Blendor, yielding transparent and highly viscous suspensions. When observed by transmission electron microscopy, the wood pulp and cotton microfibrils exhibited a regular width of 3-5 nm. Tunicin and bacterial cellulose could be disintegrated by sonication. A bulk degree of oxidation of about 0.2 per one anhydroglucose unit of cellulose was necessary for a smooth disintegration of sulfite wood pulp, whereas only small amounts of independent microfibrils were obtained at lower oxidation levels. This limiting degree of oxidation decreased in the following order: sulfite wood pulp > cotton > bacterial cellulose, tunicin.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [85]
Citations
Cites
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., & Isogai, A. (2004) · Biomacromolecules · doi:10.1021/bm0497769 · Cited by 1,292
Self-citationPolymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766
Liquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
The structure and mechanical properties of sheets prepared from bacterial cellulose
Yamanaka, S., Watanabe, K., Kitamura, N., Iguchi, M., Mitsuhashi, S., Nishi, Y., & Uryu, M. (1989) · Journal of Materials Science · doi:10.1007/bf01139032 · Cited by 612
Combined infrared and electron diffraction study of the polymorphism of native celluloses
Sugiyama, J., Persson, J., & Chanzy, H. (1991) · Macromolecules · doi:10.1021/ma00009a050 · Cited by 541
de Nooy, A. E. J., Besemer, A. C., & van Bekkum, H. (1995) · Carbohydrate Research · doi:10.1016/0008-6215(94)00343-e · Cited by 471
Preparation of Polyuronic Acid from Cellulose by TEMPO-mediated Oxidation
Isogai, A., & Kato, Y. (1998) · Cellulose · doi:10.1023/a:1009208603673 · Cited by 437
Self-citationCellulose Biosynthesis: Current Views and Evolving Concepts
SAXENA, I. M., & BROWN, R. M. (2005) · Annals of Botany · doi:10.1093/aob/mci155 · Cited by 424
Research works printed but not linked: 5
- Lepoutre P., 1974, TAPPI, 57, 87
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Saito T., 2005, TAPPI J., 4, 3
- Saito, T.; Okita, Y.; Nge, T. T.; Sugiyama, J.; Isogai, A. Carbohydr. Polym. , in press.
Cited by
Items 301–400 of 1,002
Lignocellulose materials for supercapacitor and battery electrodes: A review
Mehta, S., Jha, S., & Liang, H. Y. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110345 · Cited by 125
Oxoammonium‐ and Nitroxide‐Catalyzed Oxidations of Alcohols
Bobbitt, J. M., Brückner, C., & Merbouh, N. (2009) · Organic reactions · doi:10.1002/0471264180.or074.02 · Cited by 119
Sakai, K., Kobayashi, Y., Saito, T., & Isogai, A. (2016) · Scientific Reports · doi:10.1038/srep20434 · Cited by 119
Self-citationCellulose nanofibers isolated by TEMPO-oxidation and aqueous counter collision methods
Hải, L. V., Zhai, L., Kim, H. C., Kim, J. W., Choi, E. S., & Kim, J. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.03.008 · Cited by 119
Easy production of cellulose nanofibrils from corn stalk by a conventional high speed blender
Boufi, S., & Chaker, A. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.05.030 · Cited by 117
TEMPO-mediated oxidation of softwood thermomechanical pulp
Okita, Y., Saito, T., & Isogai, A. (2009) · Holzforschung · doi:10.1515/hf.2009.096 · Cited by 117
“…suggesting that the cellulose microfibrils undergo serious damages during the TEMPO-mediated oxidation under such harsh conditions with 20–26 mmol g-1 NaClO, compared to the TEMPO-mediated oxidation of kraft pulps and other purified celluloses with 5–6 mmol g-1 NaClO (Saito et al. 2006a,b, 2007).”
BackgroundMethodSelf-citationGrafting onto microfibrils of native cellulose
Lasseuguette, E. (2008) · Cellulose · doi:10.1007/s10570-008-9200-1 · Cited by 131
“This resulted in a highly viscous transparent suspension of microfibrils (Saito et al. 2006).”
BackgroundDwivedi, A. D., Dubey, S. P., Hokkanen, S., Fallah, R. N., & Sillanpää, M. E. T. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.06.017 · Cited by 122
Paper in Electronic and Optoelectronic Devices
Ha, D., Fang, Z., & Zhitenev, N. B. (2018) · Advanced Electronic Materials · doi:10.1002/aelm.201700593 · Cited by 120
Nanocomposites based on cellulose whiskers and (semi)conducting conjugated polymers
van den Berg, O., Schroeter, M., Capadona, J. R., & Weder, C. (2007) · Journal of Materials Chemistry · doi:10.1039/b700878c · Cited by 128
Taheri, H., & Samyn, P. (2016) · Cellulose · doi:10.1007/s10570-016-0866-5 · Cited by 116
Rheology of nanofibrillated cellulose/acrylate systems for coating applications
Grüneberger, F., Künniger, T., Zimmermann, T., & Arnold, M. (2014) · Cellulose · doi:10.1007/s10570-014-0248-9 · Cited by 119
“It is also well known that NFC suspensions exhibit higher viscosities with advanced fibrillation grade or increasing NFC concentration (Saito et al. 2006; Saarikoski et al. 2012).”
BackgroundInfluentialQuantification of cellulose nanowhiskers sulfate esterification levels
Gu, J., Catchmark, J. M., Kaiser, E. Q., & Archibald, D. D. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.10.078 · Cited by 120
Liimatainen, H., Suopajärvi, T., Sirviö, J. A., Hormi, O. E. O., & Niinimäki, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.12.042 · Cited by 113
Fujisawa, S., Togawa, E., & Kuroda, K. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b01615 · Cited by 116
Development of completely dispersed cellulose nanofibers
Isogai, A. (2018) · Proceedings of the Japan Academy Series B · doi:10.2183/pjab.94.012 · Cited by 124
Self-citationPROPOSED NANO-SCALE COALESCENCE OF CELLULOSE IN CHEMICAL PULP FIBERS DURING TECHNICAL TREATMENTS
Pönni, R., Vuorinen, T., & Kontturi, E. (2012) · BioResources · doi:10.15376/biores.7.4.6077-6108 · Cited by 123
“Hemicelluloses are also said to be partly involved in these structures (Salmén and Olsson 1998; Åkerholm and Salmén 2001).”
BackgroundDepolymerization of cellulose to glucose by oxidation–hydrolysis
Zhou, L., Yang, X., Xu, J., Shi, M., Wang, F., Chen, C., & Xu, J. C. (2014) · Green Chemistry · doi:10.1039/c4gc02151g · Cited by 111
Arola, S., Tammelin, T., Setälä, H., Tullila, A., & Linder, M. B. (2012) · Biomacromolecules · doi:10.1021/bm201676q · Cited by 121
Anti-oxidative and UV-absorbing biohybrid film of cellulose nanofibrils and tannin extract
Li, P., Sirviö, J. A., Haapala, A., Khakalo, A., & Liimatainen, H. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.02.002 · Cited by 115
Hirota, M., Furihata, K., Saito, T., Kawada, T., & Isogai, A. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201003848 · Cited by 123
Self-citationPaukkonen, H., Kunnari, M., Laurén, P., Hakkarainen, T., Auvinen, V.-V., Oksanen, T., Koivuniemi, R., Yliperttula, M., & Laaksonen, T. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.09.002 · Cited by 109
Fortunati, E., Yang, W., Luzi, F., Kenny, J. M., Torre, L., & Puglia, D. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.04.013 · Cited by 117
Wang, X., & Wu, P. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b09398 · Cited by 109
Zhang, S., Li, S., Wu, Q., Li, Q., Huang, J., Li, W., Zhang, W., & Wang, S. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108699 · Cited by 110
Zhu, M., Kong, L., Xie, M., Lü, W., Liu, H., Li, N., Feng, Z., & Zhan, J. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.125438 · Cited by 110
Preparation and characterization of hydrophobic derivatives of TEMPO-oxidized nanocelluloses
Johnson, R. K., Zink-Sharp, A., & Glasser, W. G. (2011) · Cellulose · doi:10.1007/s10570-011-9579-y · Cited by 125
“In Fig. 6a, an aqueous suspension of TONc control depicts strong birefringence, in agreement with past reports (Habibi et al. 2006; Saito et al. 2006a, 2007 ).”
BackgroundResultInfluentialSyverud, K., Xhanari, K., Chinga‐Carrasco, G., Yu, Y., & Stenius, P. J. (2010) · Journal of Nanoparticle Research · doi:10.1007/s11051-010-0077-1 · Cited by 124
“Never-dried fully bleached kraft pulp fibres made from softwood were pretreated by TEMPO-mediated oxidation according to the procedure described by Saito et al. (2006) , where the TEMPO radical catalyses oxidation of primary alcohol groups using NaClO.”
BackgroundMethodInfluentialNanostructured biocomposites based on unsaturated polyester resin and a cellulose nanofiber network
Ansari, F., Skrifvars, M., & Berglund, L. A. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.07.004 · Cited by 111
Wei, J., Chen, Y., Liu, H., Du, C., Yu, H., & Zhou, Z. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.04.015 · Cited by 109
Espinosa, E., Sánchez, R., Otero, R., Domínguez‐Robles, J., & Rodríguez, A. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.05.156 · Cited by 108
Zhu, J. Y., Agarwal, U. P., Ciesielski, P. N., Himmel, M. E., Gao, R., Deng, Y., Morits, M., & Österberg, M. (2021) · Biotechnology for Biofuels · doi:10.1186/s13068-021-01963-5 · Cited by 114
“, CNCs produced primarily using concentrated sulfuric acid hydrolysis [21, 111, 112] by hydrolyzing disordered cellulose, and CNFs produced by mechanical fibrillation [113–115] to separate cellulose fibrils without or with a pretreatment step such as TEMPO-mediated oxidation [116], dilute acid [117] or enzymatic [118,…”
BackgroundMethodHamedi, M. M., Sandberg, M., Olsson, R. T., Pedersen, J., Benselfelt, T., & Wohlert, J. (2025) · Advanced Materials · doi:10.1002/adma.202415787 · Cited by 118
Tough nanopaper structures based on cellulose nanofibers and carbon nanotubes
Salajková, M., Valentini, L., Zhou, Q., & Berglund, L. A. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.06.014 · Cited by 109
Gao, H., Duan, B., Lu, A., Deng, H., Du, Y., Shi, X., & Zhang, L. (2018) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2018.01.023 · Cited by 109
Lu, Y. Q., Han, J., Ding, Q., Yue, Y., Xia, C., Ge, S., Le, Q. V., Dou, X., Sonne, C., & Lam, S. S. (2021) · Cellulose · doi:10.1007/s10570-020-03606-8 · Cited by 110
Nematic structuring of transparent and multifunctional nanocellulose papers
Zhao, M., Ansari, F., Takeuchi, M., Shimizu, M., Saito, T., Berglund, L. A., & Isogai, A. (2017) · Nanoscale Horizons · doi:10.1039/c7nh00104e · Cited by 108
Self-citationPretreatment-dependent surface chemistry of wood nanocellulose for pH-sensitive hydrogels
Chinga‐Carrasco, G., & Syverud, K. (2014) · Journal of Biomaterials Applications · doi:10.1177/0885328214531511 · Cited by 111
“Chemical pre-treatments yield a homogeneous nanofibril morphology, with typical widths less than 20 nm.(1,2,11) TEMPO-mediated oxidation leads to a regiospecific introduction of carboxyl groups in the C6 position and small amounts of aldehyde groups.”
BackgroundMethodArsenic(III) Removal by Nanostructured Dialdehyde Cellulose–Cysteine Microscale and Nanoscale Fibers
Chen, H., Sharma, S. K., Sharma, P. R., Yeh, H., Johnson, K. I., & Hsiao, B. S. (2019) · ACS Omega · doi:10.1021/acsomega.9b03078 · Cited by 110
“It 50 − 54 To prepare the nanoscale dialdehyde cellulose (NDAC) − cys complex adsorbent, the same reaction conditions for MDAC − cys were also used.”
Effect of precipitated calcium carbonate—Cellulose nanofibrils composite filler on paper properties
He, M. H., Cho, B., & Won, J. M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.069 · Cited by 112
Saito, T., Hirota, M., Tamura, N., & Isogai, A. (2010) · Journal of Wood Science · doi:10.1007/s10086-009-1092-7 · Cited by 119
“In addition, because carboxyl groups formed on the microfi bril surfaces have anionic charges in water, which produce repulsive effects between the microfi brils, oxidized pulp can be fully disintegrated in water to individual microfi brils by mild mechanical treatment.(23,24) Films of the individualized microfi brils…”
BackgroundSelf-citationTemperature stability of nanocellulose dispersions
Heggset, E. B., Chinga‐Carrasco, G., & Syverud, K. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.09.077 · Cited by 110
“Production of the second quality was performed using TEMPO mediated oxidation (TEMPO-CNF), as described by Saito and colleagues in 2006 (Saito et al., 2006).”
MethodAssessing cellulose nanofiber production from olive tree pruning residue
Fillat, Ú., Wicklein, B., Martín‐Sampedro, R., Ibarra, D., Ruiz‐Hitzky, E., Valencia, C., Sarrión, A., Castro, E., & Eugenio, M. E. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.072 · Cited by 105
Li, P., Sirviö, J. A., Hong, S., Ämmälä, A. Ä., & Liimatainen, H. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122050 · Cited by 105
“by introducing repulsive charges.[15] This is a crucial factor that promotes the liberation of nanofiber”
BackgroundIsolation of cellulose nanofibrils from Triodia pungens via different mechanical methods
Amiralian, N., Annamalai, P. K., Memmott, P. C., & Martin, D. J. (2015) · Cellulose · doi:10.1007/s10570-015-0688-x · Cited by 108
TEMPO Electromediated Oxidation of Some Polysaccharides Including Regenerated Cellulose Fiber
Isogai, T., Saito, T., & Isogai, A. (2010) · Biomacromolecules · doi:10.1021/bm1002575 · Cited by 96
Self-citationJiménez-Saelices, C., Seantier, B., Cathala, B., & Grohens, Y. (2017) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-017-4451-7 · Cited by 104
Preparation of cross-linked cellulose nanofibril aerogel with water absorbency and shape recovery
Kim, C. H., Youn, H. J., & Lee, H. L. (2015) · Cellulose · doi:10.1007/s10570-015-0745-5 · Cited by 107
“To reduce the energy consumption several pretreatment techniques including oxidation (Saito et al. 2006, 2007; Isogai et al. 2011), carboxymethylaion (Aulin et al. 2010; Taipale et al. 2010), and enzymatic hydrolysis (Pääkkö et al. 2007; Henriksson et al. 2007; Siqueira et al. 2010) of cellulose…”
MethodLiquid-State NMR Analysis of Nanocelluloses
King, A. W. T., Mäkelä, V., Kedzior, S. A., Laaksonen, T., Partl, G., Heikkinen, S., Koskela, H. T., Heikkinen, H. A., Holding, A. J., Cranston, E. D., et al. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00295 · Cited by 104
Progress in the modification of cellulose-based adsorbents for the removal of toxic heavy metal ions
Mahdaoui, A. E., Radi, S., Elidrissi, A., Faustino, M. A. F., Neves, M. G. P. M. S., & Moura, N. M. M. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.113870 · Cited by 111
Ishii, D., Saito, T., & Isogai, A. (2011) · Biomacromolecules · doi:10.1021/bm1013876 · Cited by 109
Self-citationHuang, H., Liu, C., Zhang, L.-Q., Zhong, G., & Li, Z. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500681v · Cited by 109
Paper-based transparent flexible thin film supercapacitors
Gao, K., Shao, Z., Wu, X., Wang, X., Zhang, Y., Wang, W., & Wang, F. (2013) · Nanoscale · doi:10.1039/c3nr00674c · Cited by 103
Assembling and Redispersibility of Rice Straw Nanocellulose: Effect of tert-Butanol
Jiang, F., & Hsieh, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am505626a · Cited by 104
Hou, M., Xu, M., Hu, Y., & Li, B. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.05.037 · Cited by 102
Multifunctional Coating Films by Layer-by-Layer Deposition of Cellulose and Chitin Nanofibrils
Qi, Z.-D., Saito, T., Fan, Y., & Isogai, A. (2012) · Biomacromolecules · doi:10.1021/bm201659b · Cited by 102
Self-citationHirota, M., Tamura, N., Saito, T., & Isogai, A. (2009) · Cellulose · doi:10.1007/s10570-009-9381-2 · Cited by 114
“On the other hand, Saito et al. (2006, 2007) found that TEMPO-oxidized native cellulose fibers with sufficient amounts of carboxylate groups could be converted to mostly individual nanofibrils 3–5 nm in width and 0.5–2 lm in length by mild disintegration treatment of the oxidized celluloses in water.”
BackgroundSelf-citationHard and Transparent Films Formed by Nanocellulose–TiO2 Nanoparticle Hybrids
Schütz, C., Sort, J., Bacsik, Z., Oliynyk, V., Pellicer, E., Fall, A. B., Wågberg, L., Berglund, L. A., Bergström, L., & Salazar‐Alvarez, G. (2012) · PLoS ONE · doi:10.1371/journal.pone.0045828 · Cited by 102
Sirviö, J. A., Kolehmainen, A., Visanko, M., Liimatainen, H., Niinimäki, J., & Hormi, O. E. O. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503659j · Cited by 105
Holocellulose Nanofibers of High Molar Mass and Small Diameter for High-Strength Nanopaper
Galland, S., Berthold, F., Prakobna, K., & Berglund, L. A. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00678 · Cited by 106
Shahabi‐Ghahfarrokhi, I., Khodaiyan, F., Mousavi, M., & Yousefi, H. (2015) · Fibers and Polymers · doi:10.1007/s12221-015-0529-4 · Cited by 104
Wet Strength Improvement of TEMPO-Oxidized Cellulose Sheets Prepared with Cationic Polymers
Saito, T., & Isogai, A. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0611608 · Cited by 101
Self-citationPeng, Y., Gardner, D. J., Han, Y., Cai, Z., & Tshabalala, M. A. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.05.033 · Cited by 102
Ruiz-Palomero, C., Soriano, M. L., Benítez–Martínez, S., & Valcárcel, M. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.02.006 · Cited by 104
Turk, J., Oven, P., Poljanšek, I., Lešek, A., Knez, F., & Rebec, K. M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119107 · Cited by 102
Iwamoto, S., Kai, W., Isogai, T., Saito, T., Isogai, A., & Iwata, T. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.01.017 · Cited by 113
Self-citationYagyu, H., Saito, T., Isogai, A., Koga, H., & Nogi, M. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06915 · Cited by 101
Self-citationHighly absorbent cellulose nanofibrils aerogels prepared by supercritical drying
Darpentigny, C., Nonglaton, G., Bras, J., & Jean, B. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115560 · Cited by 99
Crystallinity-Independent yet Modification-Dependent True Density of Nanocellulose
Daicho, K., Kobayashi, K., Fujisawa, S., & Saito, T. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b01584 · Cited by 103
Self-citationMasruchin, N., Park, B., Causin, V., & Um, I. C. (2015) · Cellulose · doi:10.1007/s10570-015-0624-0 · Cited by 107
“TEMPO-mediated oxidation has been used to isolate cellulose nanofibrils fromwood pulp and cotton linters (Saito and Isogai 2004; Saito et al. 2006, 2007; Fukuzumi et al. 2009), and has been reviewed in detail (Isogai et al. 2011).”
BackgroundMethodThe effect of MFC on the pressability and paper properties of TMP and GCC based sheets
Hii, C., Gregersen, Ø. W., Chinga‐Carrasco, G., & Eriksen, Ø. (2012) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2012-27-02-p388-396 · Cited by 107
“Others have pre-treated the fibres chemically before a mechanical disintegration (Saito et al. 2006, 2007; Pääkkö et al. 2007; Henriksson, Berglund 2007; Wågberg et al. 2008; Syverud et al. 2011).”
MethodCellulose nanofibrils generated from jute fibers with tunable polymorphs and crystallinity
Yu, L., Lin, J., Tian, F., Li, X., Bian, F., & Wang, J. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00004h · Cited by 99
Effect of Preparation Conditions on Cellulose from Oil Palm Empty Fruit Bunch Fiber
Ching, Y. C., & Ng, T. S. (2014) · BioResources · doi:10.15376/biores.9.4.6373-6385 · Cited by 100
“When the wavelength reaches the diameter of the particles, more light is scattered (Saito et al. 2006).”
BackgroundMechanical characteristics of nanocellulose-PEG bionanocomposite wound dressings in wet conditions
Sun, F., Nordli, H. R., Pukstad, B. S., Gamstedt, E. K., & Chinga‐Carrasco, G. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.01.049 · Cited by 101
Individual cotton cellulose nanofibers: pretreatment and fibrillation technique
Chen, W., Abe, K., Uetani, K., Yu, H., Li, P., & Yano, H. (2014) · Cellulose · doi:10.1007/s10570-014-0172-z · Cited by 99
“Saito et al. (2006) prepared CNFs with a high amount of carboxylate groups on their surface from cotton fibers using TEMPO-mediated oxidation combined with mechanical treatment.”
InfluentialAmino Acid and Peptide Immobilization on Oxidized Nanocellulose: Spectroscopic Characterization
Barazzouk, S., & Daneault, C. (2012) · Nanomaterials · doi:10.3390/nano2020187 · Cited by 104
“Further, the TEMPO-mediated oxidation helps the disintegration process by loosening the adhesion between microfibrils and electrostatic repulsions between microfibrils, where significant amounts of carboxylate groups were introduced [11,50].”
BackgroundNanocellulosen: eine neue Familie naturbasierter Materialien
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D. G., & Dorris, A. (2011) · Angewandte Chemie · doi:10.1002/ange.201001273 · Cited by 98
Research progress of nanocellulose for electrochemical energy storage: A review
Guo, R., Zhang, L., Lu, Y., Zhang, X., & Yang, D. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.04.029 · Cited by 100
Mechanochemical Transformations of Biomass into Functional Materials
Hajiali, F., Jin, T., Yang, G., Santos, M., Lam, E., & Moores, A. (2022) · ChemSusChem · doi:10.1002/cssc.202102535 · Cited by 99
Harvesting energy from extreme environmental conditions with cellulosic triboelectric materials
Shao, Y., Luo, B., Liu, T., Cai, C., Meng, X., Wang, S., & Nie, S. (2023) · Materials Today · doi:10.1016/j.mattod.2023.04.006 · Cited by 99
Gamelas, J. A. F., Pedrosa, J. F. S., Lourenço, A. F., Mutjé, P., González, I., Chinga‐Carrasco, G., Singh, G., & Ferreira, P. J. (2015) · Micron · doi:10.1016/j.micron.2015.02.003 · Cited by 110
Niu, Q., Gao, K., & Shao, Z. (2014) · Nanoscale · doi:10.1039/c3nr05929d · Cited by 96
Bisphosphonate nanocellulose in the removal of vanadium(V) from water
Sirviö, J. A., Hasa, T., Leiviskä, T., Liimatainen, H., & Hormi, O. E. O. (2015) · Cellulose · doi:10.1007/s10570-015-0819-4 · Cited by 101
Post-sulfonation of cellulose nanofibrils with a one-step reaction to improve dispersibility
Luo, J., Semenikhin, N., Chang, H., Moon, R. J., & Kumar, S. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.10.077 · Cited by 97
“The TEMPO CNF cast from DMF exhibited a broadening of and decreased amplitude of the peak associated with COOH (∼1730 cm−1), and also a peak develops at 1613 cm−1 that is associated with COO− (Fujisawa et al., 2011; Saito et al., 2006).”
BackgroundArantes, V., Dias, I. K. R., Berto, G. L., Pereira, B., Marotti, B. D. S., & Nogueira, C. F. O. (2020) · Cellulose · doi:10.1007/s10570-020-03332-1 · Cited by 99
TEMPO-Oxidized Nanofibrillated Cellulose as a High Density Carrier for Bioactive Molecules
Weishaupt, R., Siqueira, G. D. F., Schubert, M., Tingaut, P., Maniura‐Weber, K., Zimmermann, T., Thöny‐Meyer, L., Faccio, G., & Ihssen, J. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b01100 · Cited by 103
Missoum, K., Bras, J., & Belgacem, M. N. (2012) · Cellulose · doi:10.1007/s10570-012-9780-7 · Cited by 98
“…different pretreatments have been developed with enzymes (Pääkkö et al. 2007; Siqueira et al. 2010c, d; Syverud et al. 2011), or involving chemical reactions (Saito and Isogai 2004; Saito et al. 2006, 2007), in order to decrease the energy consumption of cellulose fiber disintegration process.”
Choi, H. Y., & Jeong, Y. G. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.12.072 · Cited by 94
Cellulose Nanofibers Prepared Using the TEMPO/Laccase/O2 System
Jiang, J., Ye, W., Liu, L., Wang, Z., Fan, Y., Saito, T., & Isogai, A. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b01682 · Cited by 98
Self-citationSharma, P. R., Chattopadhyay, A., Sharma, S. K., & Hsiao, B. S. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b03659 · Cited by 93
Thiangtham, S., Runt, J. P., & Manuspiya, H. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.12.080 · Cited by 96
Cellulose nanofibres (CNF) for sulphate resistance in cement based systems
Goncalves, J., Bakkari, M. E., Boluk, Y., & Bindiganavile, V. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.03.005 · Cited by 94
Niu, Z., & Yuan, W. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b05015 · Cited by 93
An All‐Natural Wood‐Inspired Aerogel
Han, Z., Sun, W., Yang, K., Yang, H., Liu, Z., Li, D., Yin, C., Liu, H., Zhao, Y., Ling, Z., et al. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202211099 · Cited by 94
Rheological characterization of high concentrated MFC gel from kenaf unbleached pulp
Charani, P. R., Firouzabadi, M. D., Afra, E., & Shakeri, A. (2013) · Cellulose · doi:10.1007/s10570-013-9862-1 · Cited by 101
“2006), and TEMPO mediated oxidation of the fibres (Saito et al. 2006); and later by mild fibre disintegration using microfluidizers, homogenizers or super-grinders.”
InfluentialSurfactant-free emulsions stabilized by tempo-oxidized bacterial cellulose
Jia, Y., Zhai, X., Fu, W., Liu, Y., Li, F., & Zhong, C. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.05.099 · Cited by 98
Bakkari, M. E., Bindiganavile, V., Goncalves, J., & Boluk, Y. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.036 · Cited by 100
Chen, X., Song, Z., Li, S., Thang, N. T., Gao, X., Gong, X., & Guo, M. (2020) · Green Chemistry · doi:10.1039/d0gc00845a · Cited by 93
Isogai, T., Yanagisawa, M., & Isogai, A. (2008) · Cellulose · doi:10.1007/s10570-008-9245-1 · Cited by 104
“In this case, only the C6 primary hydroxyl groups present on the surfaces of crystalline cellulose microfibrils are oxidized to C6 carboxylate groups (Saito and Isogai 2004; Saito et al. 2006, 2007 ).”
BackgroundSelf-citationZhou, Q., Malm, E., Nilsson, H., Larsson, P. T., Iversen, T., Berglund, L. A., & Bulone, V. (2009) · Soft Matter · doi:10.1039/b907838j · Cited by 101
Metadata
- Authors
- Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Corresponding author
- Nishiyama, Yoshiharu
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-05-03
- Volume
- 7
- Issue
- 6
- Pages
- 1687-1691
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2020375047
- Cited by
- 1,796
- References
- 21
- Citations by year
- 2026: 57 · 2025: 72 · 2024: 85 · 2023: 102 · 2022: 135 · 2021: 125 · 2020: 141 · 2019: 133 · 2018: 142 · 2017: 137 · 2016: 120 · 2015: 100 · 2014: 111 · 2013: 96 · 2012: 76
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Keywords
- TEMPO-mediated oxidation, cellulose microfibrils, homogeneous suspensions, cotton cellulose, tunicin, bacterial cellulose, oxidation degree, sodium hypochlorite, sonication, mechanical homogenization
- MeSH terms
- Catalysis, Cellulose, Cyclic N-Oxides, Oxidation-Reduction, Particle Size, Suspensions, Microfibrils
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.