Homogeneous Suspensions of Individualized Microfibrils from TEMPO-Catalyzed Oxidation of Native Cellulose
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Never-dried native celluloses (bleached sulfite wood pulp, cotton, tunicin, and bacterial cellulose) were disintegrated into individual microfibrils after oxidation mediated by the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical followed by a homogenizing mechanical treatment. When oxidized with 3.6 mmol of NaClO per gram of cellulose, almost the totality of sulfite wood pulp and cotton were readily disintegrated into long individual microfibrils by a treatment with a Waring Blendor, yielding transparent and highly viscous suspensions. When observed by transmission electron microscopy, the wood pulp and cotton microfibrils exhibited a regular width of 3-5 nm. Tunicin and bacterial cellulose could be disintegrated by sonication. A bulk degree of oxidation of about 0.2 per one anhydroglucose unit of cellulose was necessary for a smooth disintegration of sulfite wood pulp, whereas only small amounts of independent microfibrils were obtained at lower oxidation levels. This limiting degree of oxidation decreased in the following order: sulfite wood pulp > cotton > bacterial cellulose, tunicin.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [85]
Citations
Cites
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., & Isogai, A. (2004) · Biomacromolecules · doi:10.1021/bm0497769 · Cited by 1,292
Self-citationPolymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766
Liquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
The structure and mechanical properties of sheets prepared from bacterial cellulose
Yamanaka, S., Watanabe, K., Kitamura, N., Iguchi, M., Mitsuhashi, S., Nishi, Y., & Uryu, M. (1989) · Journal of Materials Science · doi:10.1007/bf01139032 · Cited by 612
Combined infrared and electron diffraction study of the polymorphism of native celluloses
Sugiyama, J., Persson, J., & Chanzy, H. (1991) · Macromolecules · doi:10.1021/ma00009a050 · Cited by 541
de Nooy, A. E. J., Besemer, A. C., & van Bekkum, H. (1995) · Carbohydrate Research · doi:10.1016/0008-6215(94)00343-e · Cited by 471
Preparation of Polyuronic Acid from Cellulose by TEMPO-mediated Oxidation
Isogai, A., & Kato, Y. (1998) · Cellulose · doi:10.1023/a:1009208603673 · Cited by 437
Self-citationCellulose Biosynthesis: Current Views and Evolving Concepts
SAXENA, I. M., & BROWN, R. M. (2005) · Annals of Botany · doi:10.1093/aob/mci155 · Cited by 424
Research works printed but not linked: 5
- Lepoutre P., 1974, TAPPI, 57, 87
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Saito T., 2005, TAPPI J., 4, 3
- Saito, T.; Okita, Y.; Nge, T. T.; Sugiyama, J.; Isogai, A. Carbohydr. Polym. , in press.
Cited by
Items 101–200 of 1,002
Preparation of homogeneous dispersions of tunicate cellulose whiskers in organic solvents
van den Berg, O., Capadona, J. R., & Weder, C. (2007) · Biomacromolecules · doi:10.1021/bm061104q · Cited by 278
Tardy, B. L., Mattos, B. D., Otoni, C. G., Beaumont, M., Majoinen, J., Kämäräinen, T., & Rojas, O. J. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01333 · Cited by 267
Biological Nanofibrous Generator for Electricity Harvest from Moist Air Flow
Li, M., Zong, L., Yang, W., Li, X., You, J., Wu, X., Li, Z., & Li, C. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901798 · Cited by 276
Nanocellulose Life Cycle Assessment
Li, Q., McGinnis, S., Sydnor, C., Wong, A., & Renneckar, S. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc4000225 · Cited by 262
Brodin, F. W., Gregersen, Ø. W., & Syverud, K. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p156-166 · Cited by 256
“Chemical pre-treatments can also be used to introduce new functional groups on the CNF or CMF. Examples of such methods are TEMPO oxidation (Saito et al. 2006; Saito et al. 2009), carboxymethylation (Wågberg et al. 2008) or cationic modification using using N-(2,3 epoxypropyl) trimethylammonium…”
MethodForesti, M. L., Vázquez, A., & Boury, B. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.09.008 · Cited by 270
Supramolecular Structure Characterization of Molecularly Thin Cellulose I Nanoparticles
Li, Q., & Renneckar, S. (2011) · Biomacromolecules · doi:10.1021/bm101315y · Cited by 267
Nanofibrillation of Wood Pulp Using a High-Speed Blender
Uetani, K., & Yano, H. (2011) · Biomacromolecules · doi:10.1021/bm101103p · Cited by 258
Xue, Y., Mou, Z., & Xiao, H. (2017) · Nanoscale · doi:10.1039/c7nr04994c · Cited by 251
Rheological characterization of microfibrillated cellulose suspensions after freezing
Agoda-Tandjawa, G., Durand, S., Berot, S., Blassel, C., Gaillard, C., Garnier, C., & Doublier, J.-L. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.11.045 · Cited by 252
Rees, A., Powell, L. C., Chinga-Carrasco, G., Gethin, D. T., Syverud, K., Hill, K. E., & Thomas, D. W. (2015) · BioMed Research International · doi:10.1155/2015/925757 · Cited by 253
Processing of nanostructured polymers and advanced polymeric based nanocomposites
Peponi, L., Puglia, D., Torre, L., Valentini, L., & Kenny, J. M. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.08.002 · Cited by 257
Isogai, A., & Zhou, Y. (2019) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2019.01.001 · Cited by 253
Self-citationLu, Y., Yue, Y., Ding, Q., Mei, C., Xu, X., Wu, Q., Xiao, H., & Han, J. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c16828 · Cited by 254
Zhang, K., Sun, P., Liu, H., Shang, S., Song, J., & Wang, D. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.11.038 · Cited by 249
Eco-Friendly Cellulose Nanofibrils Designed by Nature: Effects from Preserving Native State
Yang, X., Reid, M. S., Olsén, P., & Berglund, L. A. (2020) · ACS Nano · doi:10.1021/acsnano.9b07659 · Cited by 249
Frka-Petesic, B., Parton, T. G., Honorato-Rios, C., Narkevicius, A., Ballu, K., Shen, Q., Lu, Z., Ogawa, Y., Haataja, J. S., Droguet, B. E., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00836 · Cited by 236
Cytotoxicity tests of cellulose nanofibril-based structures
Alexandrescu, L., Syverud, K., Gatti, A., & Chinga-Carrasco, G. (2013) · Cellulose · doi:10.1007/s10570-013-9948-9 · Cited by 240
“Research on the MFC material has gained renewed interest after it was shown that it is possible to produce MFC with relatively low energy consumption, based on various pathways that facilitate the fibrillation (Saito et al. 2006; Pääkkö et al. 2007; Heijnes-Son-Hultén 2007; Zimmermann et al. 2010).”
BackgroundMethodResultInfluentialAhola, S., Österberg, M., & Laine, J. (2008) · Cellulose · doi:10.1007/s10570-007-9167-3 · Cited by 239
The Potential of NanoCellulose in the Packaging Field: A Review
Li, F., Mascheroni, E., & Piergiovanni, L. (2015) · Packaging Technology and Science · doi:10.1002/pts.2121 · Cited by 243
Charreau, H., L. Foresti, M., & Vazquez, A. (2013) · Recent Patents on Nanotechnology · doi:10.2174/187221013804484854 · Cited by 238
Drug release from nanoparticles embedded in four different nanofibrillar cellulose aerogels
Valo, H., Arola, S., Laaksonen, P., Torkkeli, M., Peltonen, L., Linder, M. B., Serimaa, R., Kuga, S., Hirvonen, J., & Laaksonen, T. (2013) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2013.02.023 · Cited by 241
“%) and was produced as described elsewhere (Saito et al., 2006a, 2006b, 2007).”
BackgroundMethodThiol-modified cellulose nanofibrous composite membranes for chromium (VI) and lead (II) adsorption
Yang, R., Aubrecht, K. B., Ma, H., Wang, R., Grubbs, R. B., Hsiao, B. S., & Chu, B. (2014) · Polymer · doi:10.1016/j.polymer.2014.01.043 · Cited by 244
Scalable production of carboxylated cellulose nanofibres using a green and recyclable solvent
Shi, X., Wang, Z., Liu, S., Xia, Q., Liu, Y., Chen, W., Yu, H., & Zhang, K. (2024) · Nature Sustainability · doi:10.1038/s41893-024-01267-0 · Cited by 237
“9d) 38 .”
Cellulose nanowhiskers extracted from TEMPO-oxidized jute fibers
Cao, X., Ding, B., Yu, J., & Al-Deyab, S. S. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.06.046 · Cited by 242
Model Films from Native Cellulose Nanofibrils. Preparation, Swelling, and Surface Interactions
Ahola, S., Salmi, J., Johansson, L.-S., Laine, J., & Österberg, M. (2008) · Biomacromolecules · doi:10.1021/bm701317k · Cited by 236
Jiao, Y., Lu, Y., Lu, K., Yue, Y., Xu, X., Xiao, H., Li, J., & Han, J. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.04.001 · Cited by 242
Sustainable cellulose and its derivatives for promising biomedical applications
Cheng, W., Zhu, Y., Jiang, G., Cao, K., Zeng, S., Chen, W., Zhao, D., & Yu, H. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101152 · Cited by 232
Preparation, morphology and structure of cellulose nanocrystals from bamboo fibers
Brito, B. S. L., Pereira, F. V., Putaux, J.-L., & Jean, B. (2012) · Cellulose · doi:10.1007/s10570-012-9738-9 · Cited by 231
Self-citationUltrafine Polysaccharide Nanofibrous Membranes for Water Purification
Ma, H., Burger, C., Hsiao, B. S., & Chu, B. (2011) · Biomacromolecules · doi:10.1021/bm1013316 · Cited by 237
Multifunctional nanocellulose/metal and metal oxide nanoparticle hybrid nanomaterials
Oun, A. A., Shankar, S., & Rhim, J.-W. (2020) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2018.1536966 · Cited by 232
“…resources such as softwood and hardwood celluloses (Fukuzumi et al. 2009), cotton (Saito et al. 2006), tunicate (Habibi, Chanzy, and Vignon 2006; Saito et al. 2006), hemp bast holocellulose, commercial bamboo and bagasse bleached kraft pulps (Puangsin et al. 2013), Ushar seed fiber (Calotropis…”
BackgroundMethodInfluentialAlila, S., Besbes, I., Vilar, M. R., Mutjé, P., & Boufi, S. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.04.028 · Cited by 224
Nanofibrous Microfiltration Membrane Based on Cellulose Nanowhiskers
Ma, H., Burger, C., Hsiao, B. S., & Chu, B. (2012) · Biomacromolecules · doi:10.1021/bm201421g · Cited by 231
Torres‐Rendon, J. G., Femmer, T., De Laporte, L., Tigges, T., Rahimi, K., Gremse, F., Zafarnia, S., Lederle, W., Ifuku, S., Wessling, M., et al. (2015) · Advanced Materials · doi:10.1002/adma.201405873 · Cited by 226
Thiripura Sundari, M., & Ramesh, A. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.09.076 · Cited by 230
Koga, H., Tokunaga, E., Hidaka, M., Umemura, Y., Saito, T., Isogai, A., & Kitaoka, T. (2010) · Chemical Communications · doi:10.1039/c0cc02754e · Cited by 227
Self-citationSpray freeze-dried nanofibrillated cellulose aerogels with thermal superinsulating properties
Jiménez-Saelices, C., Seantier, B., Cathala, B., & Grohens, Y. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.09.068 · Cited by 219
Ifuku, S., Nogi, M., Yoshioka, M., Morimoto, M., Yano, H., & Saimoto, H. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.02.006 · Cited by 221
Siqueira, G., Tapin-Lingua, S., Bras, J., da Silva Perez, D., & Dufresne, A. (2010) · Cellulose · doi:10.1007/s10570-010-9449-z · Cited by 212
“... 2005) and hydrochloric (Araki et al. 2001; van den Berg et al. 2007) acids are commonly used to produce individualized rod-like cellulose nanocrystals since the discovery of this process by Ra ˚nby and Ribi (1949, 1950) Suspensions of cellulose fibrils called MFC can be prepared by mechanical disintegration (Herri…”
MethodEffective Young’s Modulus of Bacterial and Microfibrillated Cellulose Fibrils in Fibrous Networks
Tanpichai, S., Quero, F., Nogi, M., Yano, H., Young, R. J., Lindström, T., Sampson, W. W., & Eichhorn, S. J. (2012) · Biomacromolecules · doi:10.1021/bm300042t · Cited by 221
Nanostructured paper for flexible energy and electronic devices
Zheng, G., Cui, Y., Karabulut, E., Wågberg, L., Zhu, H., & Hu, L. (2013) · MRS Bulletin · doi:10.1557/mrs.2013.59 · Cited by 216
Besbes, I., Vilar, M. R., & Boufi, S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.015 · Cited by 215
Zhou, Y. M., Fu, S. Y., Zheng, L. M., & Zhan, H. Y. (2012) · Express Polymer Letters · doi:10.3144/expresspolymlett.2012.85 · Cited by 216
Filpponen, I., & Argyropoulos, D. S. (2010) · Biomacromolecules · doi:10.1021/bm1000247 · Cited by 208
Complete nanofibrillation of cellulose prepared by phosphorylation
Noguchi, Y., Homma, I., & Matsubara, Y. (2017) · Cellulose · doi:10.1007/s10570-017-1191-3 · Cited by 209
Daicho, K., Saito, T., Fujisawa, S., & Isogai, A. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b01438 · Cited by 213
Self-citationRebouillat, S., & Pla, F. (2013) · Journal of Biomaterials and Nanobiotechnology · doi:10.4236/jbnb.2013.42022 · Cited by 207
“CNs Surface Modification by Oxidation In an attempt to prevent CNs post-aggregation during the spray-drying procedures, several authors reported methods affecting the surface, such as polarity and chemical arrangements therewith, of the cellulose by oxidation processes [32,96-99].”
BackgroundMethodZhou, G., Li, M., Liu, C., Wu, Q., & Mei, C. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202109593 · Cited by 212
Mechanical and thermal properties of waterborne epoxy composites containing cellulose nanocrystals
Xu, S., Girouard, N., Schueneman, G., Shofner, M. L., & Meredith, J. C. (2013) · Polymer · doi:10.1016/j.polymer.2013.10.011 · Cited by 212
“CNCs are isolated from bulk cellulose by mechanical or chemical treatment to separate amorphous from crystalline regions, including acid hydrolysis [1e3], oxidation (for example, the TEMPO-mediated oxidation process) [4], homogenization [5,6], and grinding [7].”
BackgroundUltrafine Cellulose Nanofibers as Efficient Adsorbents for Removal of UO22+ in Water
Ma, H., Hsiao, B. S., & Chu, B. (2012) · ACS Macro Letters · doi:10.1021/mz200047q · Cited by 213
Hemicellulose-reinforced nanocellulose hydrogels for wound healing application
Liu, J., Chinga-Carrasco, G., Cheng, F., Xu, W., Willför, S., Syverud, K., & Xu, C. (2016) · Cellulose · doi:10.1007/s10570-016-1038-3 · Cited by 211
Nanocellulose‐Enabled Membranes for Water Purification: Perspectives
Sharma, P. R., Sharma, S. K., Lindström, T., & Hsiao, B. S. (2020) · Advanced Sustainable Systems · doi:10.1002/adsu.201900114 · Cited by 210
Comparison of nano- and microfibrillated cellulose films
Kumar, V., Bollström, R., Yang, A., Chen, Q., Chen, G., Salminen, P., Bousfield, D., & Toivakka, M. (2014) · Cellulose · doi:10.1007/s10570-014-0357-5 · Cited by 201
Nanocellulose for Industrial Use
Blanco, A., Monte, M. C., Campano, C., Balea, A., Merayo, N., & Negro, C. (2018) · Handbook of Nanomaterials for Industrial Applications · doi:10.1016/b978-0-12-813351-4.00005-5 · Cited by 190
Self‐Densification of Highly Mesoporous Wood Structure into a Strong and Transparent Film
Li, K., Wang, S., Chen, H., Yang, X., Berglund, L. A., & Zhou, Q. (2020) · Advanced Materials · doi:10.1002/adma.202003653 · Cited by 207
Liu, H., Xu, T., Liang, Q., Zhao, Q., Zhao, D., & Si, C. (2022) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-022-00427-0 · Cited by 209
Sirviö, J. A., Ukkola, J., & Liimatainen, H. (2019) · Cellulose · doi:10.1007/s10570-019-02257-8 · Cited by 202
Zhou, S., Apostolopoulou-Kalkavoura, V., Tavares da Costa, M. V., Bergström, L., Strømme, M., & Xu, C. (2020) · Nano-Micro Letters · doi:10.1007/s40820-019-0343-4 · Cited by 199
A new quality index for benchmarking of different cellulose nanofibrils
Desmaisons, J., Boutonnet, E., Rueff, M., Dufresne, A., & Bras, J. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.06.032 · Cited by 192
Song, N., Jiao, D., Ding, P., Cui, S., Tang, S., & Shi, L. (2016) · Journal of Materials Chemistry C · doi:10.1039/c5tc02194d · Cited by 199
Zhou, Y., Fu, S., Zhang, L., & Zhan, H. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.04.088 · Cited by 196
“Based on the above FTIR data, it can be concluded that the TEMPOmediated oxidation does not affect the main chemical structure of the CCNFs, but introduce carboxylate groups on its chains (Saito et al., 2006).”
BackgroundGestranius, M., Stenius, P., Kontturi, E., Sjöblom, J., & Tammelin, T. (2017) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2016.04.025 · Cited by 187
Wood‐Derived Ultrathin Carbon Nanofiber Aerogels
Li, S., Hu, B., Ding, Y., Liang, H., Li, C., Yu, Z., Wu, Z., Chen, W., & Yu, S. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201802753 · Cited by 193
Production of Nanocellulose Using Hydrated Deep Eutectic Solvent Combined with Ultrasonic Treatment
Ma, Y., Xia, Q., Liu, Y., Chen, W., Liu, S., Wang, Q., Liu, Y., Li, J., & Yu, H. (2019) · ACS Omega · doi:10.1021/acsomega.9b00519 · Cited by 185
Bian, H., Chen, L., Gleisner, R., Dai, H., & Zhu, J. Y. (2017) · Green Chemistry · doi:10.1039/c7gc00669a · Cited by 193
Liimatainen, H., Visanko, M., Sirviö, J., Hormi, O., & Niinimäki, J. (2013) · Cellulose · doi:10.1007/s10570-013-9865-y · Cited by 184
“(Saito et al. 2006) and periodate-chlorite (Liimatainen et al.”
BackgroundInfluentialCellulose Nanofibrils from Nonderivatizing Urea-Based Deep Eutectic Solvent Pretreatments
Li, P., Sirviö, J. A., Haapala, A., & Liimatainen, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13625 · Cited by 187
Wang, X., & Wu, P. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b12565 · Cited by 191
Catalysis using gold nanoparticles decorated on nanocrystalline cellulose
Lam, E., Hrapovic, S., Majid, E., Chong, J. H., & Luong, J. H. T. (2012) · Nanoscale · doi:10.1039/c2nr11558a · Cited by 188
Chen, Y., Zhou, L., Chen, L., Duan, G., Mei, C., Huang, C., Han, J., & Jiang, S. (2019) · Cellulose · doi:10.1007/s10570-019-02557-z · Cited by 179
Benhamou, K., Dufresne, A., Magnin, A., Mortha, G., & Kaddami, H. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.08.032 · Cited by 188
Solala, I., Iglesias, M. C., & Peresin, M. S. (2020) · Cellulose · doi:10.1007/s10570-019-02899-8 · Cited by 178
Surface Engineering of Ultrafine Cellulose Nanofibrils toward Polymer Nanocomposite Materials
Fujisawa, S., Saito, T., Kimura, S., Iwata, T., & Isogai, A. (2013) · Biomacromolecules · doi:10.1021/bm400178m · Cited by 185
Self-citationOxidized cellulose—Survey of the most recent achievements
Coseri, S., Biliuta, G., Simionescu, B. C., Stana-Kleinschek, K., Ribitsch, V., & Harabagiu, V. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.03.086 · Cited by 176
Ma, H., Burger, C., Hsiao, B. S., & Chu, B. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.11.055 · Cited by 180
“of shorter lengths, while the dry oxidized cellulose would be more difficult to be dispersed again and only about 50 wt% of the cellulose could be transferred into cellulose nanofibers using the current mechanical treatment [18].”
BackgroundMethodResultExtreme Light Management in Mesoporous Wood Cellulose Paper for Optoelectronics
Zhu, H., Fang, Z., Wang, Z., Dai, J., Yao, Y., Shen, F., Preston, C., Wu, W., Peng, P., Jang, N., et al. (2016) · ACS Nano · doi:10.1021/acsnano.5b06781 · Cited by 185
Liu, H., Song, J., Shang, S., Song, Z., & Wang, D. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3000209 · Cited by 181
Flocculation of microfibrillated cellulose in shear flow
Karppinen, A., Saarinen, T., Salmela, J., Laukkanen, A., Nuopponen, M., & Seppälä, J. (2012) · Cellulose · doi:10.1007/s10570-012-9766-5 · Cited by 172
“Today, oxidation (Saito et al. 2006) or enzymatic (Pääkkö et al. 2007) pretreatments can be used prior to mechanical treatment to lower the energy demand in the disintegration step and to modify the fiber surface.”
Torres-Rendon, J. G., Schacher, F. H., Ifuku, S., & Walther, A. (2014) · Biomacromolecules · doi:10.1021/bm500566m · Cited by 178
Zheng, D., Zhang, Y., Guo, Y., & Yue, J. (2019) · Polymers · doi:10.3390/polym11071130 · Cited by 180
“The peak at 1738 cm−1, which is characteristic of the C=O stretching of carboxyl groups, reappeared in the FTIR spectrum of TNC when compared with that of B-WS due to the introduction of –COOH on the cellulose surface; this indicates that cellulose was successfully modified by the TEMPO oxidation [63].”
BackgroundWu, T., Song, Y., Shi, Z., Liu, D., Chen, S., Xiong, C., & Yang, Q. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105541 · Cited by 178
Tang, Z., Lin, X., Yu, M., Mondal, A. K., & Wu, H. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.129081 · Cited by 166
Hu, J., Tian, D., Renneckar, S., & Saddler, J. N. (2018) · Scientific Reports · doi:10.1038/s41598-018-21016-6 · Cited by 175
Johnson, R. K., Zink-Sharp, A., Renneckar, S. H., & Glasser, W. G. (2009) · Cellulose · doi:10.1007/s10570-008-9269-6 · Cited by 178
“This is well within the oxidation range (0.99‐1.23 mmol/g) earlier reported for effective disintegration ( Saito et al. 2006 ).”
BackgroundResultInfluentialJiménez Saelices, C., & Capron, I. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.7b01564 · Cited by 172
Highly Permeable Polymer Membranes Containing Directed Channels for Water Purification
Ma, H., Burger, C., Hsiao, B. S., & Chu, B. (2012) · ACS Macro Letters · doi:10.1021/mz300163h · Cited by 173
Liu, H., Wang, D., Song, Z., & Shang, S. (2011) · Cellulose · doi:10.1007/s10570-010-9464-0 · Cited by 170
Jiang, F., Han, S., & Hsieh, Y.-L. (2013) · RSC Advances · doi:10.1039/c3ra41646a · Cited by 171
Ahola, S., Turon, X., Österberg, M., Laine, J., & Rojas, O. J. (2008) · Langmuir · doi:10.1021/la801550j · Cited by 173
Jiao, Y., Lu, K., Lu, Y., Yue, Y., Xu, X., Xiao, H., Li, J., & Han, J. (2021) · Cellulose · doi:10.1007/s10570-021-03782-1 · Cited by 173
Jiang, J., Zhu, Y., & Jiang, F. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118188 · Cited by 169
Syverud, K., Chinga-Carrasco, G., Toledo, J., & Toledo, P. G. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.12.066 · Cited by 164
Nechyporchuk, O., Pignon, F., & Belgacem, M. N. (2015) · Journal of Materials Science · doi:10.1007/s10853-014-8609-1 · Cited by 159
“reported to be used at a pH of 10 [29].”
BackgroundMethodYang, H., Chen, D., & van de Ven, T. G. M. (2015) · Cellulose · doi:10.1007/s10570-015-0584-4 · Cited by 165
“Individual nanofibrils cellulose (NFC) with 5 nm in width and at least 2 lm in length were produced by a 2,2,6,6-tetramethylpiperidine-1oxyl (TEMPO)-mediated oxidation pretreatment on cellulose before mechanical treatment (Saito et al. 2006; Fukuzumi et al. 2009).”
MethodNechyporchuk, O., Belgacem, M. N., & Pignon, F. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.05.092 · Cited by 161
Fujisawa, S., Ikeuchi, T., Takeuchi, M., Saito, T., & Isogai, A. (2012) · Biomacromolecules · doi:10.1021/bm300609c · Cited by 163
Self-citationDifferent routes to turn chitin into stunning nano-objects
Salaberria, A. M., Labidi, J., & Fernandes, S. C. M. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.03.005 · Cited by 165
“2) can be prepared by a method similar to the preparation of cellulose nanofibers through 2,2,6,6-tetramethyl-piperidinyl-1-oxyl (TEMPO)-mediated oxidation [66,67].”
MethodZhang, Y., Shang, Z., Shen, M., Chowdhury, S. P., Ignaszak, A., Sun, S., & Ni, Y. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b00321 · Cited by 168
Surface-Modified Nanocellulose for Application in Biomedical Engineering and Nanomedicine: A Review
Tortorella, S., Vetri Buratti, V., Maturi, M., Sambri, L., Comes Franchini, M., & Locatelli, E. (2020) · International Journal of Nanomedicine · doi:10.2147/ijn.s266103 · Cited by 160
TEMPO-mediated oxidation of β-chitin to prepare individual nanofibrils
Fan, Y., Saito, T., & Isogai, A. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.03.008 · Cited by 161
Self-citation
Metadata
- Authors
- Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Corresponding author
- Nishiyama, Yoshiharu
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-05-03
- Volume
- 7
- Issue
- 6
- Pages
- 1687-1691
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2020375047
- Cited by
- 1,796
- References
- 21
- Citations by year
- 2026: 57 · 2025: 72 · 2024: 85 · 2023: 102 · 2022: 135 · 2021: 125 · 2020: 141 · 2019: 133 · 2018: 142 · 2017: 137 · 2016: 120 · 2015: 100 · 2014: 111 · 2013: 96 · 2012: 76
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Keywords
- TEMPO-mediated oxidation, cellulose microfibrils, homogeneous suspensions, cotton cellulose, tunicin, bacterial cellulose, oxidation degree, sodium hypochlorite, sonication, mechanical homogenization
- MeSH terms
- Catalysis, Cellulose, Cyclic N-Oxides, Oxidation-Reduction, Particle Size, Suspensions, Microfibrils
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.