Homogeneous Suspensions of Individualized Microfibrils from TEMPO-Catalyzed Oxidation of Native Cellulose
The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Never-dried native celluloses (bleached sulfite wood pulp, cotton, tunicin, and bacterial cellulose) were disintegrated into individual microfibrils after oxidation mediated by the 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical followed by a homogenizing mechanical treatment. When oxidized with 3.6 mmol of NaClO per gram of cellulose, almost the totality of sulfite wood pulp and cotton were readily disintegrated into long individual microfibrils by a treatment with a Waring Blendor, yielding transparent and highly viscous suspensions. When observed by transmission electron microscopy, the wood pulp and cotton microfibrils exhibited a regular width of 3-5 nm. Tunicin and bacterial cellulose could be disintegrated by sonication. A bulk degree of oxidation of about 0.2 per one anhydroglucose unit of cellulose was necessary for a smooth disintegration of sulfite wood pulp, whereas only small amounts of independent microfibrils were obtained at lower oxidation levels. This limiting degree of oxidation decreased in the following order: sulfite wood pulp > cotton > bacterial cellulose, tunicin.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [85]
Citations
Cites
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Saito, T., & Isogai, A. (2004) · Biomacromolecules · doi:10.1021/bm0497769 · Cited by 1,292
Self-citationPolymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Dong, X. M., Kimura, T., Revol, J.-F., & Gray, D. G. (1996) · Langmuir · doi:10.1021/la950133b · Cited by 766
Liquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
The structure and mechanical properties of sheets prepared from bacterial cellulose
Yamanaka, S., Watanabe, K., Kitamura, N., Iguchi, M., Mitsuhashi, S., Nishi, Y., & Uryu, M. (1989) · Journal of Materials Science · doi:10.1007/bf01139032 · Cited by 612
Combined infrared and electron diffraction study of the polymorphism of native celluloses
Sugiyama, J., Persson, J., & Chanzy, H. (1991) · Macromolecules · doi:10.1021/ma00009a050 · Cited by 541
de Nooy, A. E. J., Besemer, A. C., & van Bekkum, H. (1995) · Carbohydrate Research · doi:10.1016/0008-6215(94)00343-e · Cited by 471
Preparation of Polyuronic Acid from Cellulose by TEMPO-mediated Oxidation
Isogai, A., & Kato, Y. (1998) · Cellulose · doi:10.1023/a:1009208603673 · Cited by 437
Self-citationCellulose Biosynthesis: Current Views and Evolving Concepts
SAXENA, I. M., & BROWN, R. M. (2005) · Annals of Botany · doi:10.1093/aob/mci155 · Cited by 424
Research works printed but not linked: 5
- Lepoutre P., 1974, TAPPI, 57, 87
- Herrick F. W., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 797
- Turbak A. F., 1983, J. Appl. Polym. Sci.: Appl. Polym. Symp., 37, 815
- Saito T., 2005, TAPPI J., 4, 3
- Saito, T.; Okita, Y.; Nge, T. T.; Sugiyama, J.; Isogai, A. Carbohydr. Polym. , in press.
Cited by
Items 701–800 of 1,002
General Synthesis and Solution Processing of Metal–Organic Framework Nanofibers
Li, S., Hu, B., Shang, L., Ma, T., Li, C., Liang, H., & Yu, S. (2022) · Advanced Materials · doi:10.1002/adma.202202504 · Cited by 51
When nanocellulose meets hydrogels: the exciting story of nanocellulose hydrogels taking flight
Du, Y., & Feng, G. (2023) · Green Chemistry · doi:10.1039/d3gc01829f · Cited by 47
Network swelling of TEMPO-oxidized nanocellulose
Maloney, T. C. (2014) · Holzforschung · doi:10.1515/hf-2014-0013 · Cited by 45
Linear, non-linear and plastic bending deformation of cellulose nanocrystals
Chen, P., Ogawa, Y., Nishiyama, Y., Ismail, A. E., & Mazeau, K. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp00624h · Cited by 45
Self-citationLiao, J., Pham, K. A., & Breedveld, V. (2020) · Cellulose · doi:10.1007/s10570-020-03572-1 · Cited by 50
Cellulose-synthesizing machinery in bacteria
Tajima, K., Imai, T., Yui, T., Yao, M., & Saxena, I. M. (2021) · Cellulose · doi:10.1007/s10570-021-04225-7 · Cited by 47
Mishra, S., Manent, A.-S., Chabot, B., & Daneault, C. (2012) · Journal of Wood Chemistry and Technology · doi:10.1080/02773813.2011.624666 · Cited by 49
Nano-dispersion of TEMPO-oxidized cellulose/aliphatic amine salts in isopropyl alcohol
Fujisawa, S., Saito, T., & Isogai, A. (2012) · Cellulose · doi:10.1007/s10570-011-9648-2 · Cited by 52
“A 0.15% dispersion of TOCN-COONa was prepared from the TEMPOoxidized cellulose by mechanical disintegration in water, details of which are described elsewhere (Saito et al. 2006, 2007; Fujisawa et al. 2011a, b; Fukuzumi et al. 2011).”
BackgroundMethodSelf-citationZhang, X., Shen, G., Sun, S., Shen, Y., Zhang, C., & Xiao, A. (2014) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2014.04.030 · Cited by 44
Kekäläinen, K., Liimatainen, H., Illikainen, M., Maloney, T. C., & Niinimäki, J. (2014) · Cellulose · doi:10.1007/s10570-014-0210-x · Cited by 50
“In the present experiments the amount of carboxyl groups needed to obtain a gel-like structure from the never-dried fibres was in the range 0.5–0.7 mmol/g, which lies between the values obtained earlier with other mechanical treatments (Besbes et al. 2011; Saito et al. 2006, 2009).”
BackgroundMethodInfluentialPaquin, M., Loranger, É., Hannaux, V., Chabot, B., & Daneault, C. (2012) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2012.08.007 · Cited by 52
Jin, L., Wei, Y., Xu, Q., Yao, W. R., & Cheng, Z. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40450 · Cited by 44
Martoïa, F., Dumont, P., Orgéas, L., Belgacem, M. N., & Putaux, J. (2015) · Soft Matter · doi:10.1039/c5sm02310f · Cited by 44
Self-citationPulping and Pretreatment Affect the Characteristics of Bagasse Inks for Three-dimensional Printing
Chinga‐Carrasco, G., Ehman, N. V., Pettersson, J., Vallejos, M. E., Brodin, M., Felissia, F. E., Håkansson, J., & Área, M. C. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04440 · Cited by 47
Pectin and Mucin Enhance the Bioadhesion of Drug Loaded Nanofibrillated Cellulose Films
Laurén, P., Paukkonen, H., Lipiäinen, T., Dong, Y., Oksanen, T., Räikkönen, H., Ehlers, H., Laaksonen, P. H., Yliperttula, M. L., & Laaksonen, T. (2018) · Pharmaceutical Research · doi:10.1007/s11095-018-2428-z · Cited by 50
“TEMPO (2,2,6,6-Tetramethylpiperidin-1-yl)oxyl oxidation) enables the use of anionic type NFC’s (ANFC) (14,15).”
MethodMao, Y., Bleuel, M., Lyu, Y., Zhang, X., Henderson, D., Wang, H., & Briber, R. M. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b01452 · Cited by 45
Xu, Y. B., Yang, S., Zhao, P., Wu, M., Song, X., & Ragauskas, A. J. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117253 · Cited by 44
Pajorová, J., Skogberg, A., Hadraba, D., Brož, A., Trávníčková, M., Zikmundová, M., Honkanen, M., Hannula, M., Lahtinen, P., Tomková, M., et al. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c01097 · Cited by 44
Extraction and characterization of cellulose nanowhiskers from TEMPO oxidized sisal fibers
Fan, F., Zhu, M., Fang, K., Cao, E., Yang, Y., Xie, J., Deng, Z., Chen, Y., & Cao, X. (2021) · Cellulose · doi:10.1007/s10570-021-04305-8 · Cited by 47
“One important thing had to note that the cellulose nanowhiskers yield was calculated to over 90%, which was more than that of dried sulfite pulps prepared by (Saito et al. 2006) and jute fibers (Cao et al. 2012).”
BackgroundThe effect of crosslinking on ion transport in nanocellulose-based membranes
Yang, H., Edberg, J., Gueskine, V., Vagin, M. Y., Say, M. G., Erlandsson, J., Wågberg, L., Engquist, I., & Magnus Berggren, A. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118938 · Cited by 45
Wood‐Derived Ultrathin Carbon Nanofiber Aerogels
Li, S., Hu, B., Ding, Y., Liang, H., Li, C., Yu, Z., Wu, Z., Chen, W., & Yu, S. (2018) · Angewandte Chemie · doi:10.1002/ange.201802753 · Cited by 45
Madivoli, E. S., Kareru, P. G., Gichuki, J., & Elbagoury, M. M. (2022) · Scientific Reports · doi:10.1038/s41598-022-23305-7 · Cited by 43
Navarro, J. R. G., & Edlund, U. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00398 · Cited by 43
Gupta, A. D., Pandey, S., Jaiswal, V. K., Bhadauria, V., & Singh, H. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.06.003 · Cited by 43
Wu, C., McClements, D. J., He, M., Huang, Y., Zhu, H., Jiang, L., Teng, F., & Li, Y. (2021) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2021.116231 · Cited by 43
Three-Dimensional Microstructural Properties of Nanofibrillated Cellulose Films
Miettinen, A., Chinga‐Carrasco, G., & Kataja, M. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms15046423 · Cited by 50
Bacterial Cellulose and its Use in Renewable Composites
Ruka, D., Simon, G. P., & Dean, K. (2014) · Wiley eBooks · doi:10.1002/9781118872246.ch4 · Cited by 48
Mihranyan, A. (2013) · Cellulose · doi:10.1007/s10570-013-9882-x · Cited by 42
“2006; Saito and Isogai 2004), which in turn greatly facilitate the defibrillation of cellulose fibers into elementary fibrils with only limited energy input (Saito et al. 2006).”
BackgroundShih, Y., Chou, M.-Y., Lian, H. Y., Hsu, L. R., & Chen-Wei, S.-M. (2018) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2018.72 · Cited by 42
“In a previous study, Isogai group employed 2,2,6,6-tetramethylpiperidine (TEMPO) to efficiently assist oxidation on a cellulose surface to catalyze the hydroxyl groups for carboxyl groups [15, 16].”
MethodYang, Q., Zhang, C., Shi, Z., Wang, J., Xiong, C., Saito, T., & Isogai, A. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b01112 · Cited by 43
Self-citationEllebracht, N. C., & Jones, C. W. (2019) · ACS Catalysis · doi:10.1021/acscatal.8b05180 · Cited by 42
Sustainable Functionalization of 2,3-Dialdehyde Cellulose via the Passerini Three-Component Reaction
Esen, E., & Meier, M. A. R. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c06153 · Cited by 42
Khakalo, A., Mäkelä, T., Johansson, L., Orelma, H., & Tammelin, T. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00576 · Cited by 42
Daicho, K., Kobayashi, K., Fujisawa, S., & Saito, T. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202110032 · Cited by 42
Self-citationProperties of hydroxypropyl guar/TEMPO-oxidized cellulose nanofibrils composite films
Dai, L., Wang, B., Long, Z., Chen, L., Zhang, D., & Guo, S. (2015) · Cellulose · doi:10.1007/s10570-015-0691-2 · Cited by 43
“Cellulose nanofibrils are usually prepared from native cellulose fibers through 2,2,6,6-tetramethylpiperidine1-oxyl (TEMPO)-mediated oxidation and successive mild shear mechanical treatment (Saito et al. 2006, 2007).”
MethodSpectroscopic characterization of oxidized nanocellulose grafted with fluorescent amino acids
Barazzouk, S., & Daneault, C. (2011) · Cellulose · doi:10.1007/s10570-011-9503-5 · Cited by 46
“Further, the TEMPOmediated oxidation helps the disintegration process by loosening the adhesion between microfibrils and electrostatic repulsions between microfibrils, where significant amounts of carboxylate groups were introduced ( Saito et al. 2006 ).”
BackgroundMethodInfluentialCellulose Nanowhiskers Extracted from Tempo-Oxidized Curaua Fibers
Neves, R. M., Lopes, K. S., Zimmermann, M. V., Poletto, M., & Zattera, A. J. (2019) · Journal of Natural Fibers · doi:10.1080/15440478.2019.1568346 · Cited by 41
“One of the methods for the production of cellulose nanowhiskers is the oxidation of the cellulose fibers through the reagent 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) and has already been applied to various types of fibers such as: wood pulps (Saito et al. 2006), sisal fibers (Moran et al.”
MethodJiang, Z., Tang, L., Gao, X., Zhang, W., Ma, J., & Zhang, L. (2019) · ACS Omega · doi:10.1021/acsomega.8b03601 · Cited by 41
Qu, J., Yuan, Z., Wang, C., Wang, A., Liu, X., Wei, B., & Wen, Y. (2019) · Cellulose · doi:10.1007/s10570-019-02655-y · Cited by 41
Effect of Fibril Length on the Ice Recrystallization Inhibition Activity of Nanocelluloses
Li, T., Li, M., Zhong, Q., & Wu, T. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116275 · Cited by 41
Pinto, A. H., Taylor, J. K., Chandradat, R., Lam, E., Liu, Y., Leung, A. C. W., Keating, M., & Sunasee, R. (2020) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2020.104187 · Cited by 42
Matsuki, S., Kayano, H., Takada, J., Kono, H., Fujisawa, S., Saito, T., & Isogai, A. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c06515 · Cited by 41
Self-citationAnti-Fouling, Adhesive Polyzwitterionic Hydrogel Electrodes Toughened Using a Tannic Acid Nanoflower
Han, Z., Chen, S., Deng, L., Liang, Q., Qu, X., Li, J., Wang, B., & Wang, H. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c14614 · Cited by 41
Temperature and pH stability of cellouronic acid
Fujisawa, S., Isogai, T., & Isogai, A. (2010) · Cellulose · doi:10.1007/s10570-010-9407-9 · Cited by 50
“On the other hand, when TEMPO/NaBr/NaClO oxidation at pH 10 or TEMPO/NaClO/NaClO2 oxidation at pH 6.8 is applied to native celluloses, mostly individualized cellulose nanofibrils 3–4 nm in width dispersed in water have been obtained by mild mechanical agitation of TEMPO-oxidized native celluloses in water (Saito and I…”
MethodSelf-citationEffect of pretreatment of bagasse pulp on properties of isolated nanofibers and nanopaper sheets
Hassan, M. L., Mathew, A. P., Hassan, E. A., & Oksman, K. (2010) · Wood and Fiber Science · Cited by 57
Kasuga, T., Isobe, N., Yagyu, H., Koga, H., & Nogi, M. (2018) · Nanomaterials · doi:10.3390/nano8020104 · Cited by 41
“In our previous work, 3–15-nm-wide cellulose nanofibers were prepared by mechanical nanofibrillation from alkali-treated holocellulose pulps or 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose pulps [1,2].”
MethodPrakobna, K., Kisonen, V., Xu, C., & Berglund, L. A. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9299-z · Cited by 44
“To reduce energy requirements, the CNF preparation can be performed via enzymatic pretreatment [11] or chemical oxidation pretreatment [12], combined with mechanical disintegration [13].”
MethodPuangsin, B., Fujisawa, S., Kuramae, R., Saito, T., & Isogai, A. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0548-9 · Cited by 43
Self-citationInamochi, T., Funahashi, R., Nakamura, Y., Saito, T., & Isogai, A. (2017) · Cellulose · doi:10.1007/s10570-017-1402-y · Cited by 41
Self-citationWu, B., Ge, L., Wu, H., Wang, X., Ge, Q., Miao, J., Cao, M. L., Chen, P., Xia, R., & Qian, J. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201801406 · Cited by 40
Fneich, F., Ville, J., Seantier, B., & Aubry, T. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.01.099 · Cited by 40
Özkan, M., Karakoç, A., Borghei, M., Wiklund, J., Rojas, O. J., & Paltakari, J. (2019) · Polymer Composites · doi:10.1002/pc.25262 · Cited by 41
Zhou, L., Gao, D., Yang, J., Yang, X., Su, Y., & Lu, T. (2019) · Cellulose · doi:10.1007/s10570-019-02903-1 · Cited by 40
Facile Preparation of Highly Transparent Conducting Nanopaper with Electrical Robustness
Zhang, K., Chen, G., Li, R., Zhao, K., Shen, J., Tian, J., & He, M. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b07266 · Cited by 40
Eco-friendly alkaline lignin/cellulose nanofiber drying system for efficient redispersion behavior
Kim, J., Bang, J., Kim, Y., Kim, J.-C., Hwang, S., Yeo, H., Choi, I.-G., & Kwak, H. W. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119122 · Cited by 43
Varghese, R. T., Cherian, R. M., Antony, T., Tharayil, A., Das, H. R., Kargarzadeh, H., Chirayil, C. J., & Thomas, S. (2022) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2022.100209 · Cited by 40
Gao, Z., Zhang, J., Ahmad, M., Jiang, B., Sun, Z., Wang, S., & Jin, Y. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119847 · Cited by 40
Nanocellulose‐Based Polymer Nanocomposite: Isolation, Characterization and Applications
Khalil, H. P. S. A., Davoudpour, Y., Aprilia, N. A. S., Mustapha, A., Hossain, S., Islam, N., & Dungani, R. (2014) · Wiley eBooks · doi:10.1002/9781118872246.ch11 · Cited by 45
Song, J., Tang, A., Liu, T., & Wang, J. (2013) · Nanoscale · doi:10.1039/c3nr33615h · Cited by 42
Mariano, M., Hantao, L. W., Bernardes, J. S., & Strauss, M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.04.075 · Cited by 41
Goh, K. Y., Ching, Y. C., Chuah, C. H., Abdullah, L. C., & Liou, N.-S. (2016) · Cellulose · doi:10.1007/s10570-016-0921-2 · Cited by 40
“In addition, light will scatter more when the wavelength approaches the width of the dispersed particles (Saito et al. 2006).”
BackgroundFajardo‐Díaz, J. L., Morelos‐Gómez, A., Cruz‐Silva, R., Ishii, K., Yasuike, T., Kawakatsu, T., Yamanaka, A., Tejima, S., Izu, K., Saito, S., et al. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4049452 · Cited by 40
Nanocellulose-Based Hollow Fibers for Advanced Water and Moisture Management
Niu, P., Mao, H., Lim, K. H., Wang, Q., Wang, W., & Yang, X. (2023) · ACS Nano · doi:10.1021/acsnano.3c02553 · Cited by 39
Oxidation vs. degradation in polysaccharides: Pullulan – A case study
Coseri, S., Bercea, M., Harabagiu, V., & Budtova, T. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.10.020 · Cited by 42
Nanobiopolymers Fabrication and Their Life Cycle Assessments
Yang, N., Zhang, W., Ye, C., Chen, X., & Ling, S. (2018) · Biotechnology Journal · doi:10.1002/biot.201700754 · Cited by 39
Ez-zaki, H., Riva, L., Bellotto, M. P., Valentini, L., Garbin, E., Punta, C., & Artioli, G. (2021) · Materials and Structures · doi:10.1617/s11527-020-01614-5 · Cited by 43
“[34] described the relationship between the dispersion of CNFs and the amount of carboxylate groups.”
BackgroundLi, L., Maddalena, L., Nishiyama, Y., Carosio, F., Ogawa, Y., & Berglund, L. A. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.119004 · Cited by 42
Self-citationHop, T. T. T., Mai, D. T., Cong, T. D., Nhi, T. T. Y., Loi, V. D., Hương, N. T. M., & Tung, N. T. (2022) · Results in Chemistry · doi:10.1016/j.rechem.2022.100540 · Cited by 43
Hirota, M., Tamura, N., Saito, T., & Isogai, A. (2011) · Cellulose · doi:10.1007/s10570-011-9642-8 · Cited by 39
“…radical (TEMPO)-mediated oxidation of wood M. Hirota N. Tamura T. Saito A. Isogai (&) Graduate School of Agricultural and Life Sciences, The University of Tokyo, 1-1-1 Yayoi, Bunkyo-ku, Tokyo 113-8657, Japan e-mail: aisogai@mail.ecc.u-tokyo.ac.jp celluloses (Saito et al. 2006, 2007).”
BackgroundSelf-citationNanofibrillation of TEMPO-oxidized bleached hardwood kraft cellulose at high solids content
Kekäläinen, K., Liimatainen, H., Biale, F., & Niinimäki, J. (2015) · Holzforschung · doi:10.1515/hf-2014-0269 · Cited by 40
“Chemical pretreatments promote nanofibrillation, for example, oxidation treatments (Saito et al. 2006; Liimatainen et al. 2012), carboxymethylation (Wågberg et al.”
BackgroundSinclair, A., Jiang, L., Bajwa, D. S., Bajwa, S. G., Tangpong, S., & Wang, X. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46304 · Cited by 39
Kebede, M. A., & Imae, T. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-813341-5.00001-2 · Cited by 38
Wang, S., Jin, X., Yue, Y., Mei, C., Xu, X., Wu, Q., Xiao, H., & Han, J. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.144225 · Cited by 38
Homma, I., Fukuzumi, H., Saito, T., & Isogai, A. (2013) · Cellulose · doi:10.1007/s10570-013-0020-6 · Cited by 42
“…new procedure for preparing mainly individual and highly crystalline cellulose nanofibrils via application of topological surface carboxylation reactions to cellulose nanofibrils, using 2,2,6,6- tetramethylpiperidinyl-1-oxyl (TEMPO) as a catalyst (Saito et al. 2006, 2007, 2009; Isogai et al. 2011).”
MethodSelf-citationÄmmälä, A. Ä., Liimatainen, H., Burmeister, C. F., & Niinimäki, J. (2013) · Cellulose · doi:10.1007/s10570-013-0012-6 · Cited by 43
“TEMPO-oxidized NFC was prepared under alkaline conditions from 10 g of cellulose diluted to 1 % consistency in deionized water (Saito et al. 2006 and 2007).”
MethodLee, M., Heo, M. H., Lee, H.-H., Kim, Y., & Shin, J. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.12.019 · Cited by 40
Vuoriluoto, M., Orelma, H., Lundahl, M. J., Borghei, M., & Rojas, O. J. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00256 · Cited by 40
Production and modification of nanofibrillated cellulose composites and potential applications
Islam, N., & Rahman, F. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102177-4.00006-9 · Cited by 49
Cheng, D., Wei, P., Zhang, L., & Cai, J. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b02424 · Cited by 38
Songfeng, E., Ning, D., Wang, Y., Huang, J., Jin, Z., Ma, Q., Yang, K., & Lu, Z. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c05292 · Cited by 38
Biopolymer Nanofibers for Nanogenerator Development
Bai, L., Li, Q., Yang, Y. F., Ling, S., Yu, H., Liu, S., Li, J., & Chen, W. (2021) · Research · doi:10.34133/2021/1843061 · Cited by 40
Roman, C., García‐Morales, M., Eugenio, M. E., Ibarra, D., Martín‐Sampedro, R., & Delgado, M. Á. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128673 · Cited by 38
“A more energy-efficient alternative is the use of chemical pre-treatments such as TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidation (Saito et al., 2006; Nechyporchuk et al., 2016).”
MethodAssembling nanocelluloses into fibrous materials and their emerging applications
Wang, B., Qiu, S., Chen, Z., Hu, Y., Shi, G., Zhuo, H., Zhang, H., & Zhong, L. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.120008 · Cited by 38
Arola, S., Kou, Z., Rooijakkers, B. J. M., Velagapudi, R., Sammalkorpi, M., & Linder, M. B. (2022) · Cellulose · doi:10.1007/s10570-022-04664-w · Cited by 40
Viscoelasticity and water plasticization of polymer-cellulose composite films and paper sheets
Myllytie, P., Salmén, L., Haimi, E., & Laine, J. (2009) · Cellulose · doi:10.1007/s10570-009-9376-z · Cited by 41
“The cell wall disintegration can be facilitated by chemical and enzymatic treatments to save energy and improve fibril dispersion (Abe et al. 2007 ;P aa ¨kko ¨ et al. 2007; Saito et al. 2006 ).”
BackgroundPark, J., Lee, D., Hwang, K., Lee, J., Lee, T.-J., Kim, Y., Kim, J. H., Lee, J., Youe, W., Chun, S., et al. (2024) · RSC Advances · doi:10.1039/d4ra04948a · Cited by 37
The Cellulose Nanofibers for Optoelectronic Conversion and Energy Storage
Luo, Y., Zhang, J., Li, X., Liao, C., & Li, X. (2014) · Journal of Nanomaterials · doi:10.1155/2014/654512 · Cited by 40
Pharmaceutical crystallization with nanocellulose organogels
Ruiz-Palomero, C., Kennedy, S. R., Soriano, M. L., Jones, C. D., Valcárcel, M., & Steed, J. W. (2016) · Chemical Communications · doi:10.1039/c6cc03088b · Cited by 37
Celebi, D., Guy, R. H., Edler, K. J., & Scott, J. L. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.09.028 · Cited by 37
“) by (2,2,6,6-tetramethyl-piperidin-1-yl)oxyl (TEMPO)-mediated NaOCl/NaBr oxidation in water, followed by mechanical dispersion as described previously (Isogai et al., 2011; Saito et al., 2006).”
MethodEllebracht, N. C., & Jones, C. W. (2018) · Cellulose · doi:10.1007/s10570-018-2043-5 · Cited by 39
Yokota, S., Tagawa, S., & Kondo, T. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117342 · Cited by 37
Highly thermally conductive SiO2-coated NFC/BNNS hybrid films with water resistance
Song, N., Wang, Q., Jiao, D., Pan, H., Shi, L., & Ding, P. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2020.106261 · Cited by 37
Zhao, M., Ono, Y., Noguchi, Y., Fujisawa, S., & Saito, T. (2021) · Cellulose · doi:10.1007/s10570-021-04013-3 · Cited by 39
Self-citationLi, W., Wang, S. F., Fan, Z., Li, S., Bernussi, A. A., & Newman, N. (2021) · Materials Today Energy · doi:10.1016/j.mtener.2021.100813 · Cited by 42
Lu, X., Jiao, H., Shi, Y., Li, Y., Zhang, H., Fu, Y., Guo, J., Wang, Q., Liu, X., Zhou, M., et al. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120669 · Cited by 39
Self-assembly of amylose-grafted carboxymethyl cellulose
Kadokawa, J., Arimura, T., Takemoto, Y., & Yamamoto, K. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.07.006 · Cited by 37
Fujisawa, S., Okita, Y., Saito, T., Togawa, E., & Isogai, A. (2011) · Cellulose · doi:10.1007/s10570-011-9578-z · Cited by 38
“TOCNs are prepared from native crystalline celluloses by the TEMPO-mediated oxidation under aqueous conditions and the successive gentle mechanical disintegration of the oxidized celluloses in water ( Saito et al. 2006, 2007, 2009; Fukuzumi et al. 2009; Isogai et al. 2011).”
MethodSelf-citationToughening mechanisms in poly(lactic) acid reinforced with TEMPO-oxidized cellulose
Bulota, M., & Hughes, M. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6443-x · Cited by 37
Production of cellulose nanofibers using phenolic enhanced surface oxidation
Tabar, I. B., Zhang, X., Youngblood, J. P., & Mosier, N. S. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.06.058 · Cited by 37
3D printing of customized lignocellulose nanofibril aerogels for efficient thermal insulation
Liu, C., Li, M., Liu, X., Zhou, G., Liu, C., & Mei, C. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103841 · Cited by 49
Metadata
- Authors
- Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Corresponding author
- Nishiyama, Yoshiharu
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-05-03
- Volume
- 7
- Issue
- 6
- Pages
- 1687-1691
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2020375047
- Cited by
- 1,796
- References
- 21
- Citations by year
- 2026: 57 · 2025: 72 · 2024: 85 · 2023: 102 · 2022: 135 · 2021: 125 · 2020: 141 · 2019: 133 · 2018: 142 · 2017: 137 · 2016: 120 · 2015: 100 · 2014: 111 · 2013: 96 · 2012: 76
- FWCI
- 8.95
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Life Sciences › Agricultural and Biological Sciences › Plant Science › Polysaccharides and Plant Cell Walls
- Keywords
- TEMPO-mediated oxidation, cellulose microfibrils, homogeneous suspensions, cotton cellulose, tunicin, bacterial cellulose, oxidation degree, sodium hypochlorite, sonication, mechanical homogenization
- MeSH terms
- Catalysis, Cellulose, Cyclic N-Oxides, Oxidation-Reduction, Particle Size, Suspensions, Microfibrils
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.