The DOI matches its Crossref record.
Novel Polyethylenimine-Modified Mesoporous Molecular Sieve of MCM-41 Type as High-Capacity Adsorbent for CO2 Capture
Abstract
The objective of the work presented here is to develop a nanoporous solid adsorbent which can serve as a “molecular basket” for CO 2 in the condensed form. Polyethylenimine (PEI)-modified mesoporous molecular sieve of MCM-41 type (MCM-41-PEI) has been prepared and tested as a CO 2 adsorbent. The physical properties of the adsorbents were characterized by X-ray powder diffraction (XRD), N 2 adsorption/desorption, and thermogravimetric analysis (TGA). The characterizations indicated that the structure of the MCM-41 was preserved after loading the PEI, and the PEI was uniformly dispersed into the channels of the molecular sieve. The CO 2 adsorption/desorption performance was tested in a flow system using a microbalance to track the weight change. The mesoporous molecular sieve had a synergetic effect on the adsorption of CO 2 by PEI. A CO 2 adsorption capacity as high as 215 mg-CO 2 /g-PEI was obtained with MCM-41-PEI-50 at 75 °C, which is 24 times higher than that of the MCM-41 and is even 2 times that of the pure PEI. With an increase in the CO 2 concentration in the CO 2 /N 2 gas mixture, the CO 2 adsorption capacity increased. The cyclic adsorption/desorption operation indicated that the performance of the adsorbent was stable.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
Direct Capture of CO2 from Ambient Air
Sanz-Pérez, E. S., Murdock, C. R., Didas, S. A., & Jones, C. W. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00173 · Cited by 2,406
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
An Amine-Functionalized MIL-53 Metal−Organic Framework with Large Separation Power for CO 2 and CH 4
Couck, S., Denayer, J. F. M., Baron, G. V., Rémy, T., Gascon, J., & Kapteijn, F. (2009) · Journal of the American Chemical Society · doi:10.1021/ja900555r · Cited by 988
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Natural gas origin, composition, and processing: A review
Faramawy, S., Zaki, T., & Sakr, A. A.-E. (2016) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2016.06.030 · Cited by 788
Air as the renewable carbon source of the future: an overview of CO2 capture from the atmosphere
Goeppert, A., Czaun, M., Surya Prakash, G. K., & Olah, G. A. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21586a · Cited by 724
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Sorbents for the Direct Capture of CO 2 from Ambient Air
Shi, X., Xiao, H., Azarabadi, H., Song, J., Wu, X., Chen, X., & Lackner, K. S. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201906756 · Cited by 679
Rufford, T. E., Smart, S., Watson, G. C. Y., Graham, B. F., Boxall, J., Diniz da Costa, J. C., & May, E. F. (2012) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2012.06.016 · Cited by 676
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
“Molecular Basket” Sorbents for Separation of CO2 and H2S from Various Gas Streams
Ma, X., Wang, X., & Song, C. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8074105 · Cited by 532
Self-citationUnderstanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Carbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion
Yang, Z.-Z., He, L.-N., Gao, J., Liu, A.-H., & Yu, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02774g · Cited by 520
Carbon Capture From Flue Gas and the Atmosphere: A Perspective
Wang, X., & Song, C. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.560849 · Cited by 428
Self-citationPetrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Advances in principal factors influencing carbon dioxide adsorption on zeolites
Bonenfant, D., Kharoune, M., Niquette, P., Mimeault, M., & Hausler, R. (2008) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/9/1/013007 · Cited by 351
Modified TiO 2 photocatalyst for CO 2 photocatalytic reduction: An overview
Abdullah, H., Khan, M. M. R., Ong, H. R., & Yaakob, Z. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.08.004 · Cited by 341
Stuckert, A. N., & Yang, R. T. (2011) · Environmental Science & Technology · doi:10.1021/es202647a · Cited by 289
CO2 Capture from Dilute Gases as a Component of Modern Global Carbon Management
Jones, C. W. (2011) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-061010-114252 · Cited by 268
CO2 capture using some fly ash-derived carbon materials
Arenillas, A., Smith, K. M., Drage, T. C., & Snape, C. E. (2005) · Fuel · doi:10.1016/j.fuel.2005.04.003 · Cited by 263
Ethylenediamine-Modified SBA-15 as Regenerable CO2 Sorbent
Zheng, F., Tran, D. N., Busche, B. J., Fryxell, G. E., Addleman, R. S., Zemanian, T. S., & Aardahl, C. L. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049488t · Cited by 261
Sorbents for CO2 capture from flue gas—aspects from materials and theoretical chemistry
Hedin, N., Chen, L., & Laaksonen, A. (2010) · Nanoscale · doi:10.1039/c0nr00042f · Cited by 243
Bhagiyalakshmi, M., Yun, L. J., Anuradha, R., & Jang, H. T. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.10.097 · Cited by 236
Sorbents for CO2 capture from high carbon fly ashes
Mercedes Maroto-Valer, M., Lu, Z., Zhang, Y., & Tang, Z. (2008) · Waste Management · doi:10.1016/j.wasman.2007.10.012 · Cited by 189
CO2 Capture in Different Carbon Materials
Jiménez, V., Ramírez-Lucas, A., Díaz, J. A., Sánchez, P., & Romero, A. (2012) · Environmental Science & Technology · doi:10.1021/es2046553 · Cited by 158
Carbon Dioxide Adsorption on Sawdust Biochar
Madzaki, H., KarimGhani, W. A. W. A. B., NurZalikhaRebitanim, & AzilBahariAlias (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.06.591 · Cited by 129
Recent developments and consideration issues in solid adsorbents for CO2 capture from flue gas
Nie, L., Mu, Y., Jin, J., Chen, J., & Mi, J. (2018) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2018.07.012 · Cited by 122
Sustainable and hierarchical porous Enteromorpha prolifera based carbon for CO2 capture
Zhang, Z., Wang, K., Atkinson, J. D., Yan, X., Li, X., Rood, M. J., & Yan, Z. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.05.094 · Cited by 120
Effects of O2 and SO2 on the Capture Capacity of a Primary-Amine Based Polymeric CO2 Sorbent
Hallenbeck, A. P., & Kitchin, J. R. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie400582a · Cited by 83
Silicoaluminophosphates as CO2 sorbents
Cheung, O., Liu, Q., Bacsik, Z., & Hedin, N. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.02.003 · Cited by 80
Shaped natural and synthetic zeolites for CO2 capture in a wide temperature range
Cavallo, M., Dosa, M., Porcaro, N. G., Bonino, F., Piumetti, M., & Crocellà, V. (2023) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102335 · Cited by 77
Zeng, W., & Bai, H. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.04.041 · Cited by 65
Vilarrasa-García, E., Cecilia, J. A., Bastos-Neto, M., Cavalcante, C. L., Azevedo, D. C. S., & Rodríguez-Castellón, E. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.03.054 · Cited by 48
Development of TREN dendrimers over mesoporous SBA-15 for CO2 adsorption
Bhagiyalakshmi, M., Park, S. D., Cha, W. S., & Jang, H. T. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.04.066 · Cited by 40
CO2 removal using amine-functionalized kenaf in pressure swing adsorption system
Kamarudin, K. S. N., Zaini, N., & Khairuddin, N. E. A. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2017.12.040 · Cited by 31
Liu, J., Wang, Z., Liang, C., Fang, K., Li, S., Guo, X., Wang, T., & Fang, M. (2024) · Science of the Total Environment · doi:10.1016/j.scitotenv.2024.174887 · Cited by 26
Zeolite and Silica-based CO2 Adsorbents
Laugel, G., Bingre, R., & Louis, B. (2018) · Post-combustion Carbon Dioxide Capture Materials · doi:10.1039/9781788013352-00076 · Cited by 2
Metadata
- Authors
- Xu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-10-12
- Volume
- 16
- Issue
- 6
- Pages
- 1463-1469
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W1986223744
- Cited by
- 1,097
- References
- 0
- FWCI
- 17.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
