Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
The DOI matches its Crossref record; 29 of the 31 references it cites were found in a registry or an index.
Abstract
Pressure swing adsorption (PSA) processes have been used extensively for gas separation, especially in the separation of hydrogen from CO 2, and in air purification. The objective of this paper is to examine the economic feasibility of pressure swing adsorption (PSA) for recovering CO 2 from postcombustion power plant flue gas. The analysis considers both high-pressure feed and vacuum desorption using commercial adsorbent 13X, which has a working capacity of 2.2 mol/kg and CO 2 /N 2 selectivity of 54. The results show that using vacuum desorption reduces the capture cost from US$57 to US$51 per ton of CO 2 avoided and is comparable in cost to CO 2 capture using conventional MEA absorption of US$49 per ton of CO 2 avoided. In this paper, a sensitivity analysis is also presented showing the effect on the capture cost with changes in process cycle; feed pressure and evacuation pressure; improvements the adsorbent characteristics; and selectivity and working capacity. The results show that a hypothetical adsorbent with a working capacity of 4.3 mol/kg and a CO 2 /N 2 selectivity of 150 can reduce the capture cost to US$30 per ton of CO 2 avoided.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“PSA process due to the simplicity as well as lower required energy is the most preferred one [52]”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [52]
Citations
Cites
Separation of CO2 from Flue Gas: A Review
Aaron, D., & Tsouris, C. (2005) · Separation Science and Technology · doi:10.1081/ss-200042244 · Cited by 1,525
(1995) · Filtration & Separation · doi:10.1016/s0015-1882(97)84188-2 · Cited by 1,169
Gas Separation by Adsorption Processes
Yang, R. (1988) · Chemical Engineering Science · doi:10.1016/0009-2509(88)80096-4 · Cited by 665
Chue, K. T., Kim, J. N., Yoo, Y. J., Cho, S. H., & Yang, R. T. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00041a020 · Cited by 499
Concentration and recovery of carbon dioxide from flue gas by pressure swing adsorption
Kikkinides, E. S., Yang, R. T., & Cho, S. H. (1993) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00023a038 · Cited by 369
An experimental adsorbent screening study for CO2 removal from N2
Harlick, P. J. E., & Tezel, F. H. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.07.035 · Cited by 355
Zhang, J., Webley, P. A., & Xiao, P. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.06.007 · Cited by 298
Optimization of a Pressure-Swing Adsorption Process Using Zeolite 13X for CO2 Sequestration
Ko, D., Siriwardane, R., & Biegler, L. T. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0204540 · Cited by 257
Reducing the Cost of CO2 Capture from Flue Gases Using Membrane Technology
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070541y · Cited by 256
Self-citationKinetic separation of methane—carbon dioxide mixture by adsorption on molecular sieve carbon
Kapoor, A., & Yang, R. T. (1989) · Chemical Engineering Science · doi:10.1016/0009-2509(89)80014-4 · Cited by 237
Research works printed but not linked: 7
- Reiner P., 1994, Carbon Dioxide Capture from Fossil Fuel Power Plants
- Ruthven D. M., 1984, Principles of Adsorption Processes
- Chou C., 2003, J. Chin. Inst. Chem. Eng., 34, 135
- Dave N. G., 2000, ACARP Report C7051
- Siriwardane, R.; Shen, M. S.; Fisher, E. P.; Poston, J. A.Adsorption and Desorption of CO 2 on Solid Sorbents. In Proceedings of the First Conference on Carbon Sequestration,Washington, DC, 2001.
- Chapel, D.; Mariz, C.; Ernest, J.Recovery of CO 2 from Flue Gases: Commercial Trend.Proceedings of Canadian Society of Chemical Engineers Annual Meeting, Saskatoon,Canada, 1999.
- Allinson, G.; Ho, M. T.; Neal, P. N.; Wiley, D. E.The Methodology used for Estimating the Costs of CCS.Proceedings of the Eighth International Conference on Greenhouse Gas Technologies (GHGT-8),Trondheim, Norway, 2006.
Cited by
Items 101–200 of 566
Using 13X, LiX, and LiPdAgX zeolites for CO2 capture from post-combustion flue gas
Chen, S. J., Zhu, M., Fu, Y., Huang, Y., Tao, Z. C., & Li, W. L. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.01.031 · Cited by 148
Evaluating Pressure Swing Adsorption as a CO2 separation technique in coal-fired power plants
Riboldi, L., & Bolland, O. (2015) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2015.02.001 · Cited by 144
Diversifying Databases of Metal Organic Frameworks for High-Throughput Computational Screening
Majumdar, S., Moosavi, S. M., Jablonka, K. M., Ongari, D., & Smit, B. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c16220 · Cited by 155
Ye, S., Jiang, X., Ruan, L.-W., Liu, B., Wang, Y., Zhu, J., & Qiu, L. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.06.007 · Cited by 140
A high adsorption capacity bamboo biochar for CO2 capture for low temperature heat utilization
Ji, Y., Zhang, C., Zhang, X. J., Xie, P. F., Wu, C., & Jiang, L. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121131 · Cited by 140
Two-Stage VPSA Process for CO2 Capture from Flue Gas Using Activated Carbon Beads
Shen, C., Liu, Z., Li, P., & Yu, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202097y · Cited by 138
Adsorption kinetics for CO2 on highly selective zeolites NaKA and nano-NaKA
Cheung, O. Y. H., Bacsik, Z., Liu, Q., Mace, A., & Hedin, N. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.017 · Cited by 141
Carbon dioxide capture and utilization in petrochemical industry: potentials and challenges
Ravanchi, M. T., & Sahebdelfar, S. (2014) · Applied Petrochemical Research · doi:10.1007/s13203-014-0050-5 · Cited by 135
“However, a vacuum desorption pressure can be applied and, for commercial adsorbent 13X, the costs of CO2 capture are comparable with the cost of MEA absorption [48].”
BackgroundDanaci, D., Bui, M., Mac Dowell, N., & Petit, C. (2020) · Molecular Systems Design & Engineering · doi:10.1039/c9me00102f · Cited by 135
Perpiñán, J., Peña, B., Bailera, M., Eveloy, V. C., Kannan, P., Raj, A., Lisbona, P., & Romeo, L. M. (2022) · Fuel · doi:10.1016/j.fuel.2022.127074 · Cited by 163
Metal–Organic Frameworks for CO 2 Separation from Flue and Biogas Mixtures
Sahoo, R., Mondal, S., Mukherjee, D., & Das, M. C. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202207197 · Cited by 136
Comparison of MEA capture cost for low CO2 emissions sources in Australia
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2010.06.004 · Cited by 132
Self-citationElectric swing adsorption as emerging CO2 capture technique
Grande, C. A., Ribeiro, R. P. L., Oliveira, E. L. G., & Rodrigues, A. E. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.160 · Cited by 132
Evolution of CO2 capture technology between 2007 and 2017 through the study of patent activity
Luis Míguez, J., Porteiro, J., Pérez-Orozco, R., Patiño, D., & Rodríguez, S. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.11.107 · Cited by 130
Microporous adsorbents for CO2 capture – a case for microporous polymers?
Xu, C., & Hedin, N. (2014) · Materials Today · doi:10.1016/j.mattod.2014.05.007 · Cited by 131
Goren, A. Y., Erdemir, D., & Dinçer, İ. (2023) · Environmental Research · doi:10.1016/j.envres.2023.117503 · Cited by 158
Onsite CO2 Capture from Flue Gas by an Adsorption Process in a Coal-Fired Power Plant
Liu, Z., Wang, L., Kong, X., Li, P., Yu, J., & Rodrigues, A. E. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3005308 · Cited by 126
Reducing the Cost of CO2 Capture from Flue Gases Using Aqueous Chemical Absorption
Raksajati, A., Ho, M. T., & Wiley, D. E. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie402185h · Cited by 125
Self-citationKong, M. G., Song, L., Liao, H., Zhang, S., Wang, Y., Deng, X., & Feng, W. (2024) · Fuel · doi:10.1016/j.fuel.2024.132103 · Cited by 155
Sorbents for the Capture of CO 2 and Other Acid Gases: A Review
Halliday, C., & Hatton, T. A. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c00597 · Cited by 125
Cerrillo, J. L., Morlanés, N., Kulkarni, S. R., Realpe, N., Ramírez, A., Katikaneni, S. P. R., Paglieri, S. N., Lee, K., Harale, A., Solami, B., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.134310 · Cited by 127
“The energy consumption of the vacuum pump (0.5 bar) and the further recompression are considered the main energy inputs for this technology [88].”
InfluentialSolar-assisted Post-combustion Carbon Capture feasibility study
Mokhtar, M., Ali, M. T., Khalilpour, K. R., Abbas, A., Shah, N., AlHajaj, A., Armstrong, P. R., Chiesa, M., & Sgouridis, S. P. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.07.032 · Cited by 121
“These include solvent-based absorption-desorption [18], membrane[19], adsorption [20,21] and mineralization [22].”
MethodCarbon capture and storage technologies: present scenario and drivers of innovation
Araújo, O. D. Q. F., & de Medeiros, J. L. (2017) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2017.05.004 · Cited by 131
Jiang, Q., Rentschler, J., Sethia, G., Weinman, S. T., Perrone, R., & Liu, K. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.103 · Cited by 123
“Among current CO2 separation technologies, adsorption processes based on solid sorbents such as PSA (Pressure Swing Adsorption) [4–6] and TSA (Temperature Swing Adsorption) are receiving increasing attention due to their unique advantages [7,8].”
BackgroundQuang, Đ. V., Milani, D., & Abu‐Zahra, M. R. M. (2023) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2023.103862 · Cited by 123
Fluorinated and Nanoporous Graphene Materials As Sorbents for Gas Separations
Schrier, J. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am2011349 · Cited by 115
Carlisle, T. K., Nicodemus, G. D., Gin, D. L., & Noble, R. D. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.01.006 · Cited by 115
ZK‐5: A CO2‐Selective Zeolite with High Working Capacity at Ambient Temperature and Pressure
Liu, Q., Pham, T., Porosoff, M. D., & Lobo, R. F. (2012) · ChemSusChem · doi:10.1002/cssc.201200339 · Cited by 115
Mukhtar, A., Saqib, S., Mellon, N. B., Babar, M., Rafiq, S., Ullah, S., Bustam, M. A., Al-Sehemi, A. G., Muhammad, N., & Chawla, M. (2020) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2020.103203 · Cited by 116
Belmabkhout, Y., & Sayari, A. (2010) · Energy & Fuels · doi:10.1021/ef100679e · Cited by 109
Xu, S., Whitehead, J. C., & Martin, P. A. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.06.090 · Cited by 111
Understanding initial opportunities and key challenges for CCUS deployment in India at scale
Vishal, V., Chandra, D., Singh, U., & Verma, Y. (2021) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2021.105829 · Cited by 122
Pressure Swing Adsorption Technologies for Carbon Dioxide Capture
Wiheeb, A. D., Helwani, Z., Kim, J., & Othman, M. R. (2016) · Separation & Purification Reviews · doi:10.1080/15422119.2015.1047958 · Cited by 106
“Wang, L., Liu, Z., Li, P., Yu, J., and Rodrigues, A.E. (2012) Experimental and modeling investigation on post-combustion carbon dioxide capture using zeolite 13X-APG by hybrid VTSA process.”
BackgroundInfluentialSolvent-Free CO2 Capture Using Membrane Capacitive Deionization
Legrand, L., Schaetzle, O., de Kler, R. C. F., & Hamelers, H. V. M. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b00980 · Cited by 106
Comparison of CO2 capture economics for iron and steel mills
Ho, M. T., Bustamante, A., & Wiley, D. E. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2013.08.003 · Cited by 126
Self-citationBahamón, D., Díaz-Márquez, A., Gamallo, P., & Vega, L. F. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.02.094 · Cited by 106
An overview on trace CO2 removal by advanced physisorbent materials
Khraisheh, M., Mukherjee, S., Kumar, A., Al Momani, F., Walker, G., & Zaworotko, M. J. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.109874 · Cited by 103
An overview of porous silica immobilized amines for direct air CO 2 capture
Cherevotan, A., Raj, J., & Peter, S. C. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta05961k · Cited by 111
Biomass Waste Carbon Materials as adsorbents for CO2 Capture under Post-Combustion Conditions
Calvo-Muñoz, E. M., García-Mateos, F. J., Rosas, J. M., Rodríguez-Mirasol, J., & Cordero, T. (2016) · Frontiers in Materials · doi:10.3389/fmats.2016.00023 · Cited by 100
“, 2012), adsorption has shown a great potential to significantly cut down the overall costs by providing substantial energy savings and reduction of the equipment sizes (Ho et al., 2008; Radosz et al., 2008; Davidson, 2009).”
BackgroundMethodPlaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.04.015 · Cited by 100
Anastasiou, S., Bhoria, N., Pokhrel, J., Reddy, K. S. K., Srinivasakannan, C., Wang, K., & Karanikolos, G. N. (2018) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2018.03.064 · Cited by 102
Ouaddari, H., Abbou, B., Lebkiri, I., Habsaoui, A., Ouzzine, M., & Allah, R. F. (2023) · Chemical Physics Impact · doi:10.1016/j.chphi.2023.100405 · Cited by 113
Ammoxidation of carbon materials for CO2 capture
Plaza, M. G., Rubiera, F., Pis, J. J., & Pevida, C. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.04.099 · Cited by 98
“Adsorption has been proposed as another attractive option as it could reduce the cost associated with the capture step [3-17].”
BackgroundFan, W., Qi, X., Dai, Y., Chen, Y., Liu, S., Zhang, X., Yang, Y., & Gao, X. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.128394 · Cited by 100
Carbon dioxide adsorption on mesoporous silica surfaces containing amine-like motifs
Zhao, G., Aziz, B., & Hedin, N. (2009) · Applied Energy · doi:10.1016/j.apenergy.2009.06.008 · Cited by 96
Bhattacharyya, D., & Miller, D. C. (2017) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2017.06.005 · Cited by 97
Brea, P., Delgado, J. A., Águeda, V. I., Gutiérrez, P., & Uguina, M. A. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.05.021 · Cited by 101
Capture of CO2 from flue gas by vacuum pressure swing adsorption using activated carbon beads
Shen, C., Yu, J., Li, P., Grande, C. A., & Rodrigues, A. E. (2010) · Adsorption · doi:10.1007/s10450-010-9298-y · Cited by 94
Cost competitive membrane—cryogenic post-combustion carbon capture
Scholes, C. A., Ho, M. T., Wiley, D. E., Stevens, G. W., & Kentish, S. E. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2013.05.017 · Cited by 93
Self-citationNovel Amine-Functionalized Magnesium Oxide Adsorbents for CO2 Capture at Ambient Conditions
Alkadhem, A. M., Elgzoly, M. A. A., & Onaizi, S. A. (2020) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2020.103968 · Cited by 93
Singh, S., Varghese, A. M., Reddy, K. S. K., Romanos, G. E., & Karanikolos, G. N. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c02040 · Cited by 93
Wang, L., Yang, Y., Shen, W., Kong, X., Li, P., Yu, J., & Rodrigues, A. E. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.07.028 · Cited by 96
Adsorptive separation of CO2/CH4/CO gas mixtures at high pressures
Krishna, R. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.02.034 · Cited by 91
Gas bubble removal in alkaline water electrolysis with utilization of pressure swings
Bakker, M. M., & Vermaas, D. A. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.06.049 · Cited by 96
Biological Metal–Organic Frameworks (Bio-MOFs) for CO2Capture
Zulys, A., Yulia, F., Muhadzib, N., & Nasruddin, N. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c04522 · Cited by 92
Recent advances and challenges in solid sorbents for CO2 capture
Zentou, H., Hoque, B., Abdalla, M. A., Saber, A. F., Abdelaziz, O. Y., Aliyu, M., Alkhedhair, A. M., Alabduly, A. J., & Abdelnaby, M. M. (2025) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2025.100386 · Cited by 174
The Economics of Helium Separation and Purification by Gas Separation Membranes
Scholes, C. A., Ghosh, U. K., & Ho, M. T. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b00976 · Cited by 87
Self-citationElectrochemical CO2sequestration in ionic liquids; a perspective
Rees, N. V., & Compton, R. G. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00580k · Cited by 87
Bench-scale demonstration of CO2 capture with electrochemically-mediated amine regeneration
Stern, M. C., & Hatton, T. A. (2013) · RSC Advances · doi:10.1039/c3ra46774k · Cited by 87
An overview of the materials and methodologies for CO 2 capture under humid conditions
Ray, B., Churipard, S. R., & Peter, S. C. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta08862a · Cited by 91
A comparison of two methods for producing CO2 capture adsorbents
Plaza, M. G., Pevida, C., Arias, B., Fermoso, J., Rubiera, F., & Pis, J. J. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.146 · Cited by 85
“It has recently been reported that the cost of the capture or separation step in postcombustion CO2 capture can be reduced by using this technology [1, 2].”
BackgroundA Multiscale Study of MOFs as Adsorbents in H2 PSA Purification
Banu, A.-M., Friedrich, D., Brandani, S., & Düren, T. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4011035 · Cited by 85
Electrochemical CO2 Capture Using Resin-Wafer Electrodeionization
Datta, S., Henry, M. P., Lin, Y. J., Fracaro, A. T., Millard, C. S., Snyder, S. W., Stiles, R. L., Shah, J., Yuan, J., Wesoloski, L. M., et al. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie402538d · Cited by 85
Study of the Interaction between Silica Surfaces and the Carbon Dioxide Molecule
Roque‐Malherbe, R., Polanco-Estrella, R., & Márquez, F. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp107754g · Cited by 88
Amidoximes: promising candidates for CO2 capture
Zulfiqar, S., Karadaş, F., Park, J., Deniz, E., Stucky, G. D., Jung, Y., Atilhan, M., & Yavuz, C. T. (2011) · Energy & Environmental Science · doi:10.1039/c1ee02264d · Cited by 84
Park, Y., Decatur, J. D., Lin, K. A., & Park, A. A. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c1cp22631b · Cited by 85
Membranes for artificial photosynthesis
Chabi, S., Papadantonakis, K. M., Lewis, N. S., & Freund, M. S. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00294g · Cited by 88
Interpenetrated metal–organic frameworks and their uptake of CO2 at relatively low pressures
Yao, Q., Su, J., Cheung, O. Y. H., Liu, Q., Hedin, N., & Zou, X. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15933c · Cited by 82
Guidelines for Techno-Economic Analysis of Adsorption Processes
Danaci, D., Webley, P. A., & Petit, C. (2021) · Frontiers in Chemical Engineering · doi:10.3389/fceng.2020.602430 · Cited by 82
Zeolite@Mesoporous silica-supported-amine hybrids for the capture of CO2 in the presence of water
Liu, X., Gao, F., Xu, J. F., Zhou, L., Liu, H., & Hu, J. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.10.006 · Cited by 80
Carbon Dioxide Capture by Amine-Impregnated Mesocellular-Foam-Containing Template
Wei, Y., Tang, J., Bian, Z., Hu, J., & Liu, H. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202093h · Cited by 84
Niu, Z., Guo, Y., Zeng, Q., & Lin, W. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2030536 · Cited by 86
CO2 adsorption using solids with different surface and acid-base properties
Gouveia, L. G. T., Agustini, C. B., Perez‐Lopez, O. W., & Gutterres, M. (2020) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2020.103823 · Cited by 78
Taheri Najafabadi, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.09.022 · Cited by 79
Integration of solar energy in coal-fired power plants retrofitted with carbon capture: A review
Parvareh, F., Sharma, M., Qadir, A., Milani, D., Khalilpour, K. R., Chiesa, M., & Abbas, A. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.032 · Cited by 79
Breakthrough adsorption study of activated carbons for CO2 separation from flue gas
Mesfer, M. K. A., & Danish, M. (2018) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2018.06.042 · Cited by 80
Gambelli, A. M., Presciutti, A., & Rossi, F. (2021) · Fluid Phase Equilibria · doi:10.1016/j.fluid.2021.113077 · Cited by 79
Hassan, T. N. A. T., Shariff, A. M., Pauzi, M. M. M., Khidzir, M. S., & Surmi, A. B. (2022) · Molecules · doi:10.3390/molecules27041424 · Cited by 80
“In PSA, the acid gas stream that contains high CO2 makes contact with spherical adsorbents packed in the column which are typically arranged in parallel to maximize the energy efficiency [42].”
BackgroundAdvanced Post-Combustion CO 2 Capture
Herzog, H. J., Meldon, J. H., & Hatton, T. A. (2009) · Cited by 78
The pilot dual-reflux vacuum pressure swing adsorption unit for CO2 capture from flue gas
Wawrzyńczak, D., Majchrzak-Kucęba, I., Srokosz, K., Kozak, M., Nowak, W., Zdeb, J., Smółka, W., & Zajchowski, A. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2018.07.079 · Cited by 77
Khalifa, O., Alkhatib, I. I. I., Bahamón, D., AlHajaj, A., Abu‐Zahra, M. R. M., & Vega, L. F. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133096 · Cited by 77
Simulation and optimization of a 6-step dual-reflux VSA cycle for post-combustion CO2 capture
Khurana, M., & Farooq, S. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.06.033 · Cited by 76
Sabouni, R., Kazemian, H., & Rohani, S. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.03.024 · Cited by 77
Won, W., Lee, S., & Lee, K. S. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.09.056 · Cited by 76
Wu, H., Yao, K., Zhu, Y., Li, B., Shi, Z., Krishna, R., & Li, J. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp3046356 · Cited by 75
Coal Bed Methane Enhancement Techniques: A Review
Singh, G. N., Rajpoot, N., & Sivagnanam, B. M. (2019) · ChemistrySelect · doi:10.1002/slct.201803633 · Cited by 79
Effect of exfoliation temperature on carbon dioxide capture of graphene nanoplates
Meng, L., & Park, S. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.07.025 · Cited by 76
Melamine based porous organic amide polymers for CO 2 capture
Zulfiqar, S., Sarwar, M. I., & Yavuz, C. T. (2014) · RSC Advances · doi:10.1039/c4ra11442f · Cited by 74
Durak, Ö., Zeeshan, M., Habib, N., Gülbalkan, H. C., Alsuhile, A. A. A. M., Çağlayan, H. P., Kurtoğlu‐Öztulum, S. F., Zhao, Y., Haslak, Z. P., Uzun, A., et al. (2022) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2022.111703 · Cited by 72
Nitrogen enriched biochar used as CO2 adsorbents: a brief review
Qiao, Y., & Wu, C. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2021.100018 · Cited by 70
New strategy to prepare ultramicroporous carbon by ionic activation for superior CO2 capture
Liu, Z., Zhang, Z., Jia, Z., Zhao, L., Zhang, T., Xing, W., Komarneni, S., Subhan, F., & Yan, Z. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.184 · Cited by 75
Recent development of membranes for carbon capture: From materials to asymmetric membranes
Jia, Y., Wong, K., Liang, C. Z., Wu, J., Chung, T., & Zhang, S. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101324 · Cited by 75
Simulation of membrane-based CO2 capture in a coal-fired power plant
Shao, P., Dal‐Cin, M. M., Guiver, M. D., & Kumar, A. (2012) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.09.044 · Cited by 68
Investigation of NaY Zeolite with adsorbed CO2 by neutron powder diffraction
Wong-Ng, W., Kaduk, J. A., Huang, Q., Espinal, L., Li, L., & Burress, J. W. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.01.024 · Cited by 67
Fischer, M., & Bell, R. G. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp3099768 · Cited by 66
Effects of Sulfur Doping and Humidity on CO2 Capture by Graphite Split Pore: A Theoretical Study
Li, X., Xue, Q., Chang, X., Zhu, L., Ling, C., & Zheng, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14281 · Cited by 67
Zhao, R., Liu, L., Zhao, L., Deng, S., Li, S., Zhang, Y., & Li, H. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.316 · Cited by 68
Gong, F., Ye, T., Yuan, L., Kan, T., Torimoto, Y., Yamamoto, M., & Li, Q. (2009) · Green Chemistry · doi:10.1039/b915830h · Cited by 67
A review of adsorbate and temperature-induced zeolite framework flexibility
Ilić, B., & Wettstein, S. G. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.10.005 · Cited by 72
Wang, Y., Hu, Z., Kundu, T., Cheng, Y., Dong, J., Qian, Y., Zhai, L., & Zhao, D. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b02173 · Cited by 67
Metadata
- Authors
- Ho, M. T., Allinson, G. W., & Wiley, D. E.
- Affiliations
- UNSW Sydney (AU)
- Corresponding author
- Wiley, Dianne E.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-06-17
- Volume
- 47
- Issue
- 14
- Pages
- 4883-4890
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2009040339
- Cited by
- 566
- References
- 31
- Citations by year
- 2026: 19 · 2025: 32 · 2024: 38 · 2023: 37 · 2022: 34 · 2021: 38 · 2020: 33 · 2019: 28 · 2018: 34 · 2017: 35 · 2016: 27 · 2015: 33 · 2014: 39 · 2013: 40 · 2012: 36
- FWCI
- 44.59
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Industrial & Engineering Chemistry Research (publishedVersion)
- Funders
- University of New South Wales
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Keywords
- pressure swing adsorption, CO2 capture, post-combustion flue gas, vacuum desorption, zeolite 13X, capture cost, CO2/N2 selectivity, power plant emissions, sensitivity analysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.