Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
The DOI matches its Crossref record; 29 of the 31 references it cites were found in a registry or an index.
Abstract
Pressure swing adsorption (PSA) processes have been used extensively for gas separation, especially in the separation of hydrogen from CO 2, and in air purification. The objective of this paper is to examine the economic feasibility of pressure swing adsorption (PSA) for recovering CO 2 from postcombustion power plant flue gas. The analysis considers both high-pressure feed and vacuum desorption using commercial adsorbent 13X, which has a working capacity of 2.2 mol/kg and CO 2 /N 2 selectivity of 54. The results show that using vacuum desorption reduces the capture cost from US$57 to US$51 per ton of CO 2 avoided and is comparable in cost to CO 2 capture using conventional MEA absorption of US$49 per ton of CO 2 avoided. In this paper, a sensitivity analysis is also presented showing the effect on the capture cost with changes in process cycle; feed pressure and evacuation pressure; improvements the adsorbent characteristics; and selectivity and working capacity. The results show that a hypothetical adsorbent with a working capacity of 4.3 mol/kg and a CO 2 /N 2 selectivity of 150 can reduce the capture cost to US$30 per ton of CO 2 avoided.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“PSA process due to the simplicity as well as lower required energy is the most preferred one [52]”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [52]
Citations
Cites
Separation of CO2 from Flue Gas: A Review
Aaron, D., & Tsouris, C. (2005) · Separation Science and Technology · doi:10.1081/ss-200042244 · Cited by 1,525
(1995) · Filtration & Separation · doi:10.1016/s0015-1882(97)84188-2 · Cited by 1,169
Gas Separation by Adsorption Processes
Yang, R. (1988) · Chemical Engineering Science · doi:10.1016/0009-2509(88)80096-4 · Cited by 665
Chue, K. T., Kim, J. N., Yoo, Y. J., Cho, S. H., & Yang, R. T. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00041a020 · Cited by 499
Concentration and recovery of carbon dioxide from flue gas by pressure swing adsorption
Kikkinides, E. S., Yang, R. T., & Cho, S. H. (1993) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00023a038 · Cited by 369
An experimental adsorbent screening study for CO2 removal from N2
Harlick, P. J. E., & Tezel, F. H. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.07.035 · Cited by 355
Zhang, J., Webley, P. A., & Xiao, P. (2008) · Energy Conversion and Management · doi:10.1016/j.enconman.2007.06.007 · Cited by 298
Optimization of a Pressure-Swing Adsorption Process Using Zeolite 13X for CO2 Sequestration
Ko, D., Siriwardane, R., & Biegler, L. T. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0204540 · Cited by 257
Reducing the Cost of CO2 Capture from Flue Gases Using Membrane Technology
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070541y · Cited by 256
Self-citationKinetic separation of methane—carbon dioxide mixture by adsorption on molecular sieve carbon
Kapoor, A., & Yang, R. T. (1989) · Chemical Engineering Science · doi:10.1016/0009-2509(89)80014-4 · Cited by 237
Research works printed but not linked: 7
- Reiner P., 1994, Carbon Dioxide Capture from Fossil Fuel Power Plants
- Ruthven D. M., 1984, Principles of Adsorption Processes
- Chou C., 2003, J. Chin. Inst. Chem. Eng., 34, 135
- Dave N. G., 2000, ACARP Report C7051
- Siriwardane, R.; Shen, M. S.; Fisher, E. P.; Poston, J. A.Adsorption and Desorption of CO 2 on Solid Sorbents. In Proceedings of the First Conference on Carbon Sequestration,Washington, DC, 2001.
- Chapel, D.; Mariz, C.; Ernest, J.Recovery of CO 2 from Flue Gases: Commercial Trend.Proceedings of Canadian Society of Chemical Engineers Annual Meeting, Saskatoon,Canada, 1999.
- Allinson, G.; Ho, M. T.; Neal, P. N.; Wiley, D. E.The Methodology used for Estimating the Costs of CCS.Proceedings of the Eighth International Conference on Greenhouse Gas Technologies (GHGT-8),Trondheim, Norway, 2006.
Cited by
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Porous materials with optimal adsorption thermodynamics and kinetics for CO2 separation
Nugent, P., Belmabkhout, Y., Burd, S. D., Cairns, A. J., Luebke, R., Forrest, K., Pham, T., Ma, S., Space, B., Wojtas, L., et al. (2013) · Nature · doi:10.1038/nature11893 · Cited by 2,387
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
“Ho et al. (2008) examined the economic feasibility of CO 2 capture from power-plant flue gas by PSA process.”
Emerging Multifunctional Metal–Organic Framework Materials
Li, B., Wen, H., Cui, Y., Zhou, W., Qian, G., & Chen, B. (2016) · Advanced Materials · doi:10.1002/adma.201601133 · Cited by 1,587
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture
Sevilla, M., Valle‐Vigón, P., & Fuertes, A. B. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100291 · Cited by 936
Data-driven design of metal–organic frameworks for wet flue gas CO2 capture
Boyd, P. G., Chidambaram, A., García-Díez, E., Ireland, C. P., Daff, T. D., Bounds, R., Gładysiak, A., Schouwink, P., Moosavi, S. M., Maroto-Valer, M. M., et al. (2019) · Nature · doi:10.1038/s41586-019-1798-7 · Cited by 885
Recent developments on carbon capture and storage: An overview
Pires, J. C. M., Martins, F. G., Alvim-Ferraz, M. C. M., & Simões, M. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2011.01.028 · Cited by 811
Biogas as a renewable energy fuel – A review of biogas upgrading, utilisation and storage
Ullah Khan, I., Hafiz Dzarfan Othman, M., Hashim, H., Matsuura, T., Ismail, A. F., Rezaei-DashtArzhandi, M., & Wan Azelee, I. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.08.035 · Cited by 775
Perspective of microporous metal–organic frameworks for CO2capture and separation
Zhang, Z., Yao, Z.-Z., Xiang, S., & Chen, B. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00143e · Cited by 767
Ben-Mansour, R., Habib, M. A., Bamidele, O. E., Basha, M., Qasem, N. A. A., Peedikakkal, A., Laoui, T., & Ali, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.011 · Cited by 722
“It has been reported that the incurred cost in CO2 capture and its associated procedures, with the use of liquid solvent absorption, can be cut down by a great deal if adsorption separation technique is used [19].”
MethodGuide to CO2 Separations in Imidazolium-Based Room-Temperature Ionic Liquids
Bara, J. E., Carlisle, T. K., Gabriel, C. J., Camper, D., Finotello, A., Gin, D. L., & Noble, R. D. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8016237 · Cited by 714
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Rahman, F. A., Aziz, M. M. A., Saidur, R., Bakar, W. A. W. A., Hainin, M. R., Putrajaya, R., & Hassan, N. A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.011 · Cited by 685
He, Y., Krishna, R., & Chen, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22858k · Cited by 674
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Post-combustion carbon capture
Chao, C., Deng, Y., Dewil, R., Baeyens, J., & Fan, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110490 · Cited by 652
Stabilization of Amine-Containing CO2 Adsorbents: Dramatic Effect of Water Vapor
Sayari, A., & Belmabkhout, Y. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1013773 · Cited by 635
A search for selectivity to enable CO2 capture with porous adsorbents
Oschatz, M., & Antonietti, M. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02110k · Cited by 612
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Flue gas treatment via CO2 adsorption
Sayari, A., Belmabkhout, Y., & Serna-Guerrero, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.007 · Cited by 594
Combination of ionic liquids with membrane technology: A new approach for CO2 separation
Dai, Z., Noble, R. D., Gin, D. L., Zhang, X., & Deng, L. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.08.060 · Cited by 559
Herm, Z. R., Swisher, J. A., Smit, B., Krishna, R., & Long, J. R. (2011) · Journal of the American Chemical Society · doi:10.1021/ja111411q · Cited by 521
Electrochemical carbon dioxide capture to close the carbon cycle
Sharifian, R., Wagterveld, R. M., Digdaya, I. A., Xiang, C., & Vermaas, D. A. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03382k · Cited by 514
Opportunities and challenges in carbon dioxide capture
Spigarelli, B. P., & Kawatra, S. K. (2013) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2013.03.002 · Cited by 512
Active chemisorption sites in functionalized ionic liquids for carbon capture
Cui, G., Wang, J., & Zhang, S. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00462d · Cited by 498
Carbon Dioxide Capture Adsorbents: Chemistry and Methods
Patel, H. A., Byun, J., & Yavuz, C. T. (2017) · ChemSusChem · doi:10.1002/cssc.201601545 · Cited by 492
Zeolites as Selective Adsorbents for CO2 Separation
Boer, D. G., Langerak, J., & Pescarmona, P. P. (2023) · ACS Applied Energy Materials · doi:10.1021/acsaem.2c03605 · Cited by 481
To, J. W. F., He, J., Mei, J., Haghpanah, R., Chen, Z., Kurosawa, T., Chen, S., Bae, W.-G., Pan, L., Tok, J. B.-H., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11955 · Cited by 475
Abanades, J. C., Arias, B., Lyngfelt, A., Mattisson, T., Wiley, D. E., Li, H., Ho, M. T., Mangano, E., & Brandani, S. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.04.018 · Cited by 441
Self-citationTrends in CO2 conversion and utilization: A review from process systems perspective
Rafiee, A., Rajab Khalilpour, K., Milani, D., & Panahi, M. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.08.065 · Cited by 435
Srinivas, G., Krungleviciute, V., Guo, Z.-X., & Yildirim, T. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42918k · Cited by 428
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
Membrane-based carbon capture from flue gas: a review
Khalilpour, R., Mumford, K., Zhai, H., Abbas, A., Stevens, G., & Rubin, E. S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.10.050 · Cited by 417
“CMC and b) TSSP. Ho et al. (2008a) investigated three processes, i.e., a single-stage and two-stage cascades with and without retentate recycle.”
BackgroundResultCarbon capture in metal–organic frameworks—a comparative study
Simmons, J. M., Wu, H., Zhou, W., & Yildirim, T. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00700e · Cited by 402
Al-Janabi, N., Hill, P., Torrente-Murciano, L., Garforth, A., Gorgojo, P., Siperstein, F., & Fan, X. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.07.020 · Cited by 386
“capacity are coupled with increases in the CO2/N2 selectivity [5] and thermal and moisture stability.”
BackgroundInfluentialTechnologies for Biogas Upgrading to Biomethane: A Review
Adnan, A. I., Ong, M. Y., Nomanbhay, S., Chew, K. W., & Show, P. L. (2019) · Bioengineering · doi:10.3390/bioengineering6040092 · Cited by 378
A multi-scale framework for CO2 capture, utilization, and sequestration: CCUS and CCU
Hasan, M. M. F., First, E. L., Boukouvala, F., & Floudas, C. A. (2015) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2015.04.034 · Cited by 381
Current status of biogas upgrading for direct biomethane use: A review
Khan, M. U., Lee, J. T. E., Bashir, M. A., Dissanayake, P. D., Ok, Y. S., Tong, Y. W., Shariati, M. A., Wu, S., & Ahring, B. K. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111343 · Cited by 373
Plaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.07.030 · Cited by 365
“Adsorption is a separation technology with potential to reduce the cost of post-combustion capture compared to amine scrubbing [3-5].”
BackgroundBelmabkhout, Y., Guillerm, V., & Eddaoudi, M. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.03.124 · Cited by 358
“Relationship between the CO2 capture cost, CO2 selectivity, and working CO2 capacity for solid sorbents [101].”
BackgroundO’Brien, C. P., Miao, R. K., Liu, S., Xu, Y., Lee, G., Robb, A., Huang, J. E., Xie, K., Bertens, K., Gabardo, C. M., et al. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c01122 · Cited by 343
In silico screening of metal–organic frameworks in separation applications
Krishna, R., & van Baten, J. M. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c1cp20282k · Cited by 333
Valorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications
Plaza, M. G., González, A. S., Pevida, C., Pis, J. J., & Rubiera, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.05.028 · Cited by 313
“purification of H2 among other applications [11, 12], has been proposed as a candidate to reduce the cost associated to postcombustion CO2 capture [13-16].”
BackgroundRecent advances in gas hydrate-based CO2 capture
Dashti, H., Zhehao Yew, L., & Lou, X. (2015) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2015.01.033 · Cited by 313
“75 per ton of CO2 captured, which is comparable to the cost of US$ 59 per ton of CO2 captured using conventional amine-based absorption and US$ 64 per ton of CO2 for adsorption by zeolite (Ho et al., 2008; Reiner et al., 1994; Tam et al., 2001).”
BackgroundInfluentialRecent advances in multi-layer composite polymeric membranes for CO2 separation: A review
Dai, Z., Ansaloni, L., & Deng, L. (2016) · Green Energy & Environment · doi:10.1016/j.gee.2016.08.001 · Cited by 311
Bacsik, Z., Ahlsten, N., Ziadi, A., Zhao, G., Garcia-Bennett, A. E., Martín-Matute, B., & Hedin, N. (2011) · Langmuir · doi:10.1021/la202033p · Cited by 308
In silico screening of zeolite membranes for CO2 capture
Krishna, R., & van Baten, J. M. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.05.032 · Cited by 307
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Raganati, F., & Ammendola, P. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02513 · Cited by 296
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
A review of mathematical modeling of fixed-bed columns for carbon dioxide adsorption
Shafeeyan, M. S., Wan Daud, W. M. A., & Shamiri, A. (2014) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2013.08.018 · Cited by 293
“…have been addressed in the literature (Agarwal et al., 2010b; Chaffee et al., 2007; Chou and Chen, 2004; Chue et al., 1995; Grande et al., 2008; Ho et al., 2008; Kikkinides et al., 1993; Ko et al., 2003; Mulgundmath et al., 2012; Na et al., 2001; Reynolds et al., 2005; Sircar and Kratz, 1988;…”
BackgroundCO 2 Electroreduction from Carbonate Electrolyte
Li, Y. C., Lee, G., Yuan, T., Wang, Y., Nam, D.-H., Wang, Z., García de Arquer, F. P., Lum, Y., Dinh, C.-T., Voznyy, O., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b00975 · Cited by 282
Carbon dioxide separation and capture by adsorption: a review
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01589-z · Cited by 275
“Accordingly, recently it has received a significant attention regarding its applications for carbon capture and storage as well as biogas upgrading (Ho et al. 2008; Khajeh and Ghaemi 2020; Jin et al. 2021; Karimi et al. 2022b).”
BackgroundSustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
Nguyen, N. T. T., Furukawa, H., Gándara, F., Nguyen, H. T., Cordova, K. E., & Yaghi, O. M. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201403980 · Cited by 280
Modeling Amorphous Microporous Polymers for CO2Capture and Separations
Kupgan, G., Abbott, L. J., Hart, K. E., & Colina, C. M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00691 · Cited by 272
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Riboldi, L., & Bolland, O. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1385 · Cited by 256
Pokhrel, J., Bhoria, N., Anastasiou, S., Tsoufis, T., Gournis, D., Romanos, G., & Karanikolos, G. N. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.03.012 · Cited by 252
Sorbents for CO2 capture from flue gas—aspects from materials and theoretical chemistry
Hedin, N., Chen, L., & Laaksonen, A. (2010) · Nanoscale · doi:10.1039/c0nr00042f · Cited by 243
Increasing Selective CO2 Adsorption on Amine-Grafted SBA-15 by Increasing Silanol Density
Wang, L., & Yang, R. T. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp206976d · Cited by 238
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101890 · Cited by 237
Plaza, M. G., González, A. S., Pis, J. J., Rubiera, F., & Pevida, C. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.09.058 · Cited by 233
CO2 adsorption kinetics on mesoporous silica under wide range of pressure and temperature
Loganathan, S., Tikmani, M., Edubilli, S., Mishra, A., & Ghoshal, A. K. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.06.091 · Cited by 231
CO2 adsorption by activated templated carbons
Sevilla, M., & Fuertes, A. B. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.09.038 · Cited by 229
Post-combustion carbon dioxide capture using electrochemically mediated amine regeneration
Stern, M. C., Simeon, F., Herzog, H., & Hatton, T. A. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41165f · Cited by 229
Wang, L., & Yang, R. T. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp2100446 · Cited by 221
Analysis of Equilibrium-Based TSA Processes for Direct Capture of CO2 from Air
Kulkarni, A. R., & Sholl, D. S. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300691c · Cited by 219
Krishna, R., & Long, J. R. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp202203c · Cited by 217
Development of low-cost biomass-based adsorbents for postcombustion CO2 capture
Plaza, M. G., Pevida, C., Arias, B., Fermoso, J., Casal, M. D., Martín, C. F., Rubiera, F., & Pis, J. J. (2009) · Fuel · doi:10.1016/j.fuel.2009.02.025 · Cited by 216
Carbon dioxide capturing technologies: a review focusing on metal organic framework materials (MOFs)
Sabouni, R., Kazemian, H., & Rohani, S. (2014) · Environmental Science and Pollution Research · doi:10.1007/s11356-013-2406-2 · Cited by 216
“The suitable adsorbent for CO2 capture from flue gas should at least exhibit a CO2 adsorption capacity of 2–4 mmol/g (Ho et al. 2008).”
BackgroundMicrowave pyrolysis of rice straw to produce biochar as an adsorbent for CO2 capture
Huang, Y.-F., Chiueh, P.-T., Shih, C.-H., Lo, S.-L., Sun, L., Zhong, Y., & Qiu, C. (2015) · Energy · doi:10.1016/j.energy.2015.02.026 · Cited by 211
Mahurin, S. M., Lee, J. S., Baker, G. A., Luo, H., & Dai, S. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.02.045 · Cited by 207
Hasan, M. M. F., Baliban, R. C., Elia, J. A., & Floudas, C. A. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie301571d · Cited by 202
Hasan, M. M. F., Baliban, R. C., Elia, J. A., & Floudas, C. A. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie301572n · Cited by 204
A novel bimetallic MIL-101(Cr, Mg) with high CO2 adsorption capacity and CO2/N2 selectivity
Zhou, Z., Mei, L., Ma, C., Xu, F., Xiao, J., Xia, Q., & Li, Z. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.03.035 · Cited by 198
Multi-bed Vacuum Pressure Swing Adsorption for carbon dioxide capture from flue gas
Liu, Z., Grande, C. A., Li, P., Yu, J., & Rodrigues, A. E. (2011) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.07.037 · Cited by 196
Hasan, M. M. F., Boukouvala, F., First, E. L., & Floudas, C. A. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie402931c · Cited by 194
Wen, H.-M., Liao, C., Li, L., Alsalme, A., Alothman, Z., Krishna, R., Wu, H., Zhou, W., Hu, J., & Chen, B. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11596f · Cited by 193
Covalent organic frameworks for CO2 capture: from laboratory curiosity to industry implementation
Li, H., Dilipkumar, A., Abubakar, S., & Zhao, D. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00465h · Cited by 191
Separation of SF6 from SF6/N2 mixture using metal–organic framework MIL-100(Fe) granule
Kim, P.-J., You, Y.-W., Park, H., Chang, J.-S., Bae, Y.-S., Lee, C.-H., & Suh, J.-K. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.09.123 · Cited by 190
“Among these technologies, adsorption separation processes, such as pressure swing adsorption (PSA) or vacuum swing adsorption (VSA) [3,14,15], could be promising options in separating SF6 because of the low operation and capital investment costs as well as the easy operation and superiority in energy efficiency.”
BackgroundNaKA sorbents with high CO2-over-N2 selectivity and high capacity to adsorb CO2
Liu, Q., Mace, A., Bacsik, Z., Sun, J., Laaksonen, A., & Hedin, N. (2010) · Chemical Communications · doi:10.1039/c000900h · Cited by 187
Recent progress in ionic liquid membranes for gas separation
Sasikumar, B., Arthanareeswaran, G., & Ismail, A. F. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.06.081 · Cited by 186
Bacsik, Z., Atluri, R., Garcia-Bennett, A. E., & Hedin, N. (2010) · Langmuir · doi:10.1021/la1001495 · Cited by 184
Activated carbons—preparation, characterization and their application in CO2 capture: A review
Serafin, J., & Dziejarski, B. (2023) · Environmental Science and Pollution Research · doi:10.1007/s11356-023-28023-9 · Cited by 179
Graphene oxide derived carbons (GODCs): synthesis and gas adsorption properties
Srinivas, G., Burress, J., & Yildirim, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21100a · Cited by 179
A comparison of the CO2 capture characteristics of zeolites and metal–organic frameworks
Krishna, R., & van Baten, J. M. (2012) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.11.031 · Cited by 176
Akhtar, F., Liu, Q., Hedin, N., & Bergström, L. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21153j · Cited by 174
A comprehensive review of carbon capture science and technologies
Wu, C., Huang, Q., Xu, Z., Sipra, A. T., Gao, N., Vandenberghe, L. P. D. S., Vieira, S., Soccol, C. R., Zhao, R., Deng, S., et al. (2024) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2023.100178 · Cited by 165
Current and future perspectives on catalytic-based integrated carbon capture and utilization
Sabri, M. A., Al Jitan, S., Bahamon, D., Vega, L. F., & Palmisano, G. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.148081 · Cited by 168
Adsorption equilibria and kinetics of CO2 and N2 on activated carbon beads
Shen, C., Grande, C. A., Li, P., Yu, J., & Rodrigues, A. E. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.12.005 · Cited by 164
Recent advances in functionalized composite solid materials for carbon dioxide capture
Yaumi, A. L., Bakar, M. Z. A., & Hameed, B. H. (2017) · Energy · doi:10.1016/j.energy.2017.02.053 · Cited by 165
Wang, L., Liu, Z., Li, P., Yu, J., & Rodrigues, A. E. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.05.017 · Cited by 161
Measurement, Standards, and Data Needs for CO2 Capture Materials: A Critical Review
Espinal, L., Poster, D. L., Wong-Ng, W., Allen, A. J., & Green, M. L. (2013) · Environmental Science & Technology · doi:10.1021/es402622q · Cited by 161
Shafeeyan, M. S., Daud, W. M. A. W., Shamiri, A., & Aghamohammadi, N. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b00653 · Cited by 174
Subraveti, S. G., Roussanaly, S., Anantharaman, R., Riboldi, L., & Rajendran, A. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.117832 · Cited by 152
Wang, L., Yang, Y., Shen, W., Kong, X., Li, P., Yu, J., & Rodrigues, A. E. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4009716 · Cited by 154
Covalent triazine frameworks for carbon dioxide capture
Wang, H., Jiang, D., Huang, D., Zeng, G., Xu, P., Lai, C., Chen, M., Cheng, M., Zhang, C., & Wang, Z. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta06847c · Cited by 154
Cost-effective CO2 capture based on in silico screening of zeolites and process optimization
Hasan, M. M. F., First, E. L., & Floudas, C. A. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp53627k · Cited by 149
Metadata
- Authors
- Ho, M. T., Allinson, G. W., & Wiley, D. E.
- Affiliations
- UNSW Sydney (AU)
- Corresponding author
- Wiley, Dianne E.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-06-17
- Volume
- 47
- Issue
- 14
- Pages
- 4883-4890
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2009040339
- Cited by
- 566
- References
- 31
- Citations by year
- 2026: 19 · 2025: 32 · 2024: 38 · 2023: 37 · 2022: 34 · 2021: 38 · 2020: 33 · 2019: 28 · 2018: 34 · 2017: 35 · 2016: 27 · 2015: 33 · 2014: 39 · 2013: 40 · 2012: 36
- FWCI
- 44.59
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Industrial & Engineering Chemistry Research (publishedVersion)
- Funders
- University of New South Wales
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Keywords
- pressure swing adsorption, CO2 capture, post-combustion flue gas, vacuum desorption, zeolite 13X, capture cost, CO2/N2 selectivity, power plant emissions, sensitivity analysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.