The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Optimum Conditions for Adsorptive Storage
Abstract
The storage of gases in porous adsorbents, such as activated carbon and carbon nanotubes, is examined here thermodynamically from a systems viewpoint, considering the entire adsorption-desorption cycle. The results provide concrete objective criteria to guide the search for the "Holy Grail" adsorbent, for which the adsorptive delivery is maximized. It is shown that, for ambient temperature storage of hydrogen and delivery between 30 and 1.5 bar pressure, for the optimum adsorbent the adsorption enthalpy change is 15.1 kJ/mol. For carbons, for which the average enthalpy change is typically 5.8 kJ/mol, an optimum operating temperature of about 115 K is predicted. For methane, an optimum enthalpy change of 18.8 kJ/mol is found, with the optimum temperature for carbons being 254 K. It is also demonstrated that for maximum delivery of the gas the optimum adsorbent must be homogeneous, and that introduction of heterogeneity, such as by ball milling, irradiation, and other means, can only provide small increases in physisorption-related delivery for hydrogen. For methane, heterogeneity is always detrimental, at any value of average adsorption enthalpy change. These results are confirmed with the help of experimental data from the literature, as well as extensive Monte Carlo simulations conducted here using slit pore models of activated carbons as well as atomistic models of carbon nanotubes. The simulations also demonstrate that carbon nanotubes offer little or no advantage over activated carbons in terms of enhanced delivery, when used as storage media for either hydrogen or methane.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Equation of State Calculations by Fast Computing Machines
Metropolis, N., Rosenbluth, A. W., Rosenbluth, M. N., Teller, A. H., & Teller, E. (1953) · The Journal of Chemical Physics · doi:10.1063/1.1699114 · Cited by 37,192
Quantum Mechanics and Path Integrals
(1966) · Students Quarterly Journal · doi:10.1049/sqj.1966.0063 · Cited by 9,537
Hydrogen-storage materials for mobile applications
Schlapbach, L., & Züttel, A. (2001) · Nature · doi:10.1038/35104634 · Cited by 8,865
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Hydrogen Storage in Microporous Metal-Organic Frameworks
Rosi, N. L., Eckert, J., Eddaoudi, M., Vodak, D. T., Kim, J., O'Keeffe, M., & Yaghi, O. M. (2003) · Science · doi:10.1126/science.1083440 · Cited by 4,846
The interaction of gases with solid surfaces
Steele, W. A. (1974) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,504
Hydrogen Sorption in Functionalized Metal−Organic Frameworks
Rowsell, J. L. C., Millward, A. R., Park, K. S., & Yaghi, O. M. (2004) · Journal of the American Chemical Society · doi:10.1021/ja049408c · Cited by 1,326
High H 2 Uptake by Alkali-Doped Carbon Nanotubes Under Ambient Pressure and Moderate Temperatures
Chen, P., Wu, X., Lin, J., & Tan, K. L. (1999) · Science · doi:10.1126/science.285.5424.91 · Cited by 1,164
Hydrogen Storage in Graphite Nanofibers
Chambers, A., Park, C., Baker, R. T. K., & Rodriguez, N. M. (1998) · The Journal of Physical Chemistry B · doi:10.1021/jp980114l · Cited by 959
Tuning clathrate hydrates for hydrogen storage
Lee, H., Lee, J.-W., Kim, D. Y., Park, J., Seo, Y.-T., Zeng, H., Moudrakovski, I. L., Ratcliffe, C. I., & Ripmeester, J. A. (2005) · Nature · doi:10.1038/nature03457 · Cited by 869
Cited by
Hydrogen storage in metal–organic frameworks
Murray, L. J., Dincă, M., & Long, J. R. (2009) · Chemical Society Reviews · doi:10.1039/b802256a · Cited by 4,532
Furukawa, H., & Yaghi, O. M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9015765 · Cited by 2,608
Chemical and Physical Solutions for Hydrogen Storage
Eberle, U., Felderhoff, M., & Schüth, F. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200806293 · Cited by 1,674
Gas Storage in Nanoporous Materials
Morris, R. E., & Wheatley, P. S. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200703934 · Cited by 1,622
Emerging Multifunctional Metal–Organic Framework Materials
Li, B., Wen, H., Cui, Y., Zhou, W., Qian, G., & Chen, B. (2016) · Advanced Materials · doi:10.1002/adma.201601133 · Cited by 1,587
Applications of advanced hybrid organic–inorganic nanomaterials: from laboratory to market
Sanchez, C., Belleville, P., Popall, M., & Nicole, L. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00136h · Cited by 1,462
Gas storage in porous metal–organic frameworks for clean energy applications
Ma, S., & Zhou, H.-C. (2010) · Chem. Commun. · doi:10.1039/b916295j · Cited by 1,349
Evaluating metal–organic frameworks for natural gas storage
Mason, J. A., Veenstra, M., & Long, J. R. (2014) · Chem. Sci. · doi:10.1039/c3sc52633j · Cited by 1,239
Getman, R. B., Bae, Y.-S., Wilmer, C. E., & Snurr, R. Q. (2012) · Chemical Reviews · doi:10.1021/cr200217c · Cited by 1,196
MOFs, MILs and more: concepts, properties and applications for porous coordination networks (PCNs)
Janiak, C., & Vieth, J. K. (2010) · New Journal of Chemistry · doi:10.1039/c0nj00275e · Cited by 1,185
Hydrogen Storage in a Microporous Metal−Organic Framework with Exposed Mn2+ Coordination Sites
Dincǎ, M., Dailly, A., Liu, Y., Brown, C. M., Neumann, D. A., & Long, J. R. (2006) · Journal of the American Chemical Society · doi:10.1021/ja0656853 · Cited by 1,137
Nanoporous organic polymer networks
Dawson, R., Cooper, A. I., & Adams, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.09.002 · Cited by 1,114
Tuning the Topology and Functionality of Metal−Organic Frameworks by Ligand Design
Zhao, D., Timmons, D. J., Yuan, D., & Zhou, H.-C. (2011) · Accounts of Chemical Research · doi:10.1021/ar100112y · Cited by 1,094
Metal–Organic Frameworks as A Tunable Platform for Designing Functional Molecular Materials
Wang, C., Liu, D., & Lin, W. (2013) · Journal of the American Chemical Society · doi:10.1021/ja308229p · Cited by 981
Porous metal-organic frameworks for gas storage and separation: Status and challenges
Li, H., Li, L., Lin, R.-B., Zhou, W., Zhang, Z., Xiang, S., & Chen, B. (2019) · EnergyChem · doi:10.1016/j.enchem.2019.100006 · Cited by 891
Methane storage in advanced porous materials
Makal, T. A., Li, J.-R., Lu, W., & Zhou, H.-C. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35251f · Cited by 812
Hydrogen Storage in the Giant‐Pore Metal–Organic Frameworks MIL‐100 and MIL‐101
Latroche, M., Surblé, S., Serre, C., Mellot‐Draznieks, C., Llewellyn, P. L., Lee, J., Chang, J., Jhung, S. H., & Férey, G. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200600105 · Cited by 799
Pillared Graphene: A New 3-D Network Nanostructure for Enhanced Hydrogen Storage
Dimitrakakis, G. K., Tylianakis, E., & Froudakis, G. E. (2008) · Nano Letters · doi:10.1021/nl801417w · Cited by 772
Lin, X., Telepeni, I., Blake, A. J., Dailly, A., Brown, C. M., Simmons, J. M., Zoppi, M., Walker, G. S., Thomas, K. M., Mays, T. J., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja806624j · Cited by 768
Materials for hydrogenstorage: current research trends and perspectives
van den Berg, A. W. C., & Areán, C. O. (2008) · Chem. Commun. · doi:10.1039/b712576n · Cited by 762
Ren, J., Musyoka, N. M., Langmi, H. W., Mathe, M., & Liao, S. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.11.195 · Cited by 707
Hydrogen Storage in Microporous Hypercrosslinked Organic Polymer Networks
Wood, C. D., Tan, B., Trewin, A., Niu, H., Bradshaw, D., Rosseinsky, M. J., Khimyak, Y. Z., Campbell, N. L., Kirk, R., Stöckel, E., et al. (2007) · Chemistry of Materials · doi:10.1021/cm070356a · Cited by 704
Porous Aromatic Frameworks (PAFs)
Tian, Y., & Zhu, G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00687 · Cited by 700
Advanced carbon aerogels for energy applications
Biener, J., Stadermann, M., Suss, M., Worsley, M. A., Biener, M. M., Rose, K. A., & Baumann, T. F. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00627k · Cited by 651
Langmuir’s Theory of Adsorption: A Centennial Review
Swenson, H., & Stadie, N. P. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b00154 · Cited by 646
Can Metal–Organic Framework Materials Play a Useful Role in Large‐Scale Carbon Dioxide Separations?
Keskin, S., van Heest, T. M., & Sholl, D. S. (2010) · ChemSusChem · doi:10.1002/cssc.201000114 · Cited by 610
Furukawa, H., Miller, M. A., & Yaghi, O. M. (2007) · Journal of Materials Chemistry · doi:10.1039/b703608f · Cited by 607
Han, S. S., Mendoza-Cortés, J. L., & Goddard III, W. A. (2009) · Chemical Society Reviews · doi:10.1039/b802430h · Cited by 594
Porous materials for hydrogen storage
Chen, Z., Kirlikovali, K. O., Idrees, K. B., Wasson, M. C., & Farha, O. K. (2022) · Chem · doi:10.1016/j.chempr.2022.01.012 · Cited by 543
Challenges to developing materials for the transport and storage of hydrogen
Allendorf, M. D., Stavila, V., Snider, J. L., Witman, M., Bowden, M. E., Brooks, K., Tran, B. L., & Autrey, T. (2022) · Nature Chemistry · doi:10.1038/s41557-022-01056-2 · Cited by 534
Graphyne and Graphdiyne: Promising Materials for Nanoelectronics and Energy Storage Applications
Srinivasu, K., & Ghosh, S. K. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp212181h · Cited by 511
Porous carbon-based materials for hydrogen storage: advancement and challenges
Xia, Y., Yang, Z., & Zhu, Y. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10583k · Cited by 496
Nouar, F., Eckert, J., Eubank, J. F., Forster, P., & Eddaoudi, M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja807229a · Cited by 485
Sevilla, M., Fuertes, A. B., & Mokaya, R. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00347f · Cited by 481
Storage of hydrogen in nanostructured carbon materials
Yürüm, Y., Taralp, A., & Veziroglu, T. N. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.03.001 · Cited by 475
Hydrogen Storage in Metal-Organic Frameworks: A Review
Langmi, H. W., Ren, J., North, B., Mathe, M., & Bessarabov, D. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2013.10.190 · Cited by 461
The current status of hydrogen storage in metal–organic frameworks
Zhao, D., Yuan, D., & Zhou, H.-C. (2008) · Energy & Environmental Science · doi:10.1039/b808322n · Cited by 443
Nanoporous Polymers for Hydrogen Storage
Germain, J., Fréchet, J. M. J., & Svec, F. (2009) · Small · doi:10.1002/smll.200801762 · Cited by 432
Nuhnen, A., & Janiak, C. (2020) · Dalton Transactions · doi:10.1039/d0dt01784a · Cited by 430
Role of Exposed Metal Sites in Hydrogen Storage in MOFs
Vitillo, J. G., Regli, L., Chavan, S., Ricchiardi, G., Spoto, G., Dietzel, P. D. C., Bordiga, S., & Zecchina, A. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8007159 · Cited by 423
Optimized Acetylene/Carbon Dioxide Sorption in a Dynamic Porous Crystal
Zhang, J.-P., & Chen, X.-M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8089872 · Cited by 420
Hydrogen Storage Materials for Mobile and Stationary Applications: Current State of the Art
Lai, Q., Paskevicius, M., Sheppard, D. A., Buckley, C. E., Thornton, A. W., Hill, M. R., Gu, Q., Mao, J., Huang, Z., Liu, H. K., et al. (2015) · ChemSusChem · doi:10.1002/cssc.201500231 · Cited by 414
Observation of Cu2+–H2 Interactions in a Fully Desolvated Sodalite‐Type Metal–Organic Framework
Dincă, M., Han, W. S., Liu, Y., Dailly, A., Brown, C. M., & Long, J. R. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604362 · Cited by 414
Hydrogen Storage in Metal–Organic Frameworks
Hu, Y. H., & Zhang, L. (2010) · Advanced Materials · doi:10.1002/adma.200902096 · Cited by 403
Carbon capture in metal–organic frameworks—a comparative study
Simmons, J. M., Wu, H., Zhou, W., & Yildirim, T. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00700e · Cited by 402
Carbide‐Derived Carbons: Effect of Pore Size on Hydrogen Uptake and Heat of Adsorption
Yushin, G., Dash, R., Jagiello, J., Fischer, J. E., & Gogotsi, Y. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500830 · Cited by 402
Yang, S., Lin, X., Blake, A. J., Walker, G. S., Hubberstey, P., Champness, N. R., & Schröder, M. (2009) · Nature Chemistry · doi:10.1038/nchem.333 · Cited by 393
Microporous Organic Polymers for Methane Storage
Wood, C. D., Tan, B., Trewin, A., Su, F., Rosseinsky, M. J., Bradshaw, D., Sun, Y., Zhou, L., & Cooper, A. I. (2008) · Advanced Materials · doi:10.1002/adma.200702397 · Cited by 386
Graphene‐Based Nanocomposites for Energy Storage
Ji, L., Meduri, P., Agubra, V., Xiao, X., & Alcoutlabi, M. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502159 · Cited by 385
Hydrogen adsorption in microporous hypercrosslinked polymers
Lee, J.-Y., Wood, C. D., Bradshaw, D., Rosseinsky, M. J., & Cooper, A. I. (2006) · Chemical Communications · doi:10.1039/b604625h · Cited by 352
Sumida, K., Horike, S., Kaye, S. S., Herm, Z. R., Queen, W. L., Brown, C. M., Grandjean, F., Long, G. J., Dailly, A., & Long, J. R. (2010) · Chemical Science · doi:10.1039/c0sc00179a · Cited by 347
Du, A., Zhu, Z., & Smith, S. C. (2010) · Journal of the American Chemical Society · doi:10.1021/ja100156d · Cited by 340
Germain, J., Fréchet, J. M. J., & Svec, F. (2007) · Journal of Materials Chemistry · doi:10.1039/b711509a · Cited by 327
Allendorf, M. D., Hulvey, Z., Gennett, T., Ahmed, A., Autrey, T., Camp, J., Seon Cho, E., Furukawa, H., Haranczyk, M., Head-Gordon, M., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01085d · Cited by 311
Keskin, S., Liu, J., Rankin, R. B., Johnson, J. K., & Sholl, D. S. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie800666s · Cited by 310
Yuan, B., Wu, X., Chen, Y., Huang, J., Luo, H., & Deng, S. (2013) · Environmental Science & Technology · doi:10.1021/es4000643 · Cited by 305
Thomas, K. M. (2009) · Dalton Transactions · doi:10.1039/b815583f · Cited by 305
Yan, Y., Telepeni, I., Yang, S., Lin, X., Kockelmann, W., Dailly, A., Blake, A. J., Lewis, W., Walker, G. S., Allan, D. R., et al. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1001407 · Cited by 291
Hydrogen storage in metal–organic frameworks
Lin, X., Jia, J., Hubberstey, P., Schröder, M., & Champness, N. R. (2007) · CrystEngComm · doi:10.1039/b706207a · Cited by 290
Activated carbon with optimum pore size distribution for hydrogen storage
Sethia, G., & Sayari, A. (2016) · Carbon · doi:10.1016/j.carbon.2015.12.032 · Cited by 288
Electric field enhanced hydrogen storage on polarizable materials substrates
Zhou, J., Wang, Q., Sun, Q., Jena, P., & Chen, X. S. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0905571107 · Cited by 286
Kapelewski, M. T., Runčevski, T., Tarver, J. D., Jiang, H. Z. H., Hurst, K. E., Parilla, P. A., Ayala, A., Gennett, T., FitzGerald, S. A., Brown, C. M., et al. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b03276 · Cited by 283
Denysenko, D., Grzywa, M., Tonigold, M., Streppel, B., Krkljus, I., Hirscher, M., Mugnaioli, E., Kolb, U., Hanss, J., & Volkmer, D. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201001872 · Cited by 276
Liu, Y., Kabbour, H., Brown, C. M., Neumann, D. A., & Ahn, C. C. (2008) · Langmuir · doi:10.1021/la703864a · Cited by 272
Kapelewski, M. T., Geier, S. J., Hudson, M. R., Stück, D., Mason, J. A., Nelson, J. N., Xiao, D. J., Hulvey, Z., Gilmour, E., FitzGerald, S. A., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja506230r · Cited by 270
Importance of pore size in high-pressure hydrogen storage by porous carbons
Gogotsi, Y., Portet, C., Osswald, S., Simmons, J. M., Yildirim, T., Laudisio, G., & Fischer, J. E. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.05.073 · Cited by 265
Combinatorial Search for Optimal Hydrogen-Storage Nanomaterials Based on Polymers
Lee, H., Choi, W. I., & Ihm, J. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.056104 · Cited by 262
Concepts for improving hydrogen storage in nanoporous materials
Broom, D. P., Webb, C. J., Fanourgakis, G. S., Froudakis, G. E., Trikalitis, P. N., & Hirscher, M. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.01.224 · Cited by 261
Design and synthesis of covalent organic frameworks towards energy and environment fields
Cao, S., Li, B., Zhu, R., & Pang, H. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.184 · Cited by 256
Ab Initio Study of Hydrogen Adsorption in MOF-5
Sillar, K., Hofmann, A., & Sauer, J. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8099079 · Cited by 254
Infrared study of boron–carbon chemical bonds in boron-doped activated carbon
Romanos, J., Beckner, M., Stalla, D., Tekeei, A., Suppes, G., Jalisatgi, S., Lee, M., Hawthorne, F., Robertson, J. D., Firlej, L., et al. (2013) · Carbon · doi:10.1016/j.carbon.2012.11.031 · Cited by 197
In silico Design of Porous Polymer Networks: High-Throughput Screening for Methane Storage Materials
Martin, R. L., Simon, C. M., Smit, B., & Haranczyk, M. (2014) · Journal of the American Chemical Society · doi:10.1021/ja4123939 · Cited by 170
Net adsorption of gas/vapor mixtures in microporous solids
Talu, O. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4021382 · Cited by 33
Metadata
- Authors
- Bhatia, S. K., & Myers, A. L.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-01-17
- Volume
- 22
- Issue
- 4
- Pages
- 1688-1700
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2079819807
- Cited by
- 1,113
- References
- 32
- FWCI
- 42.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.