The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
A Long-Life, High-Rate Lithium/Sulfur Cell: A Multifaceted Approach to Enhancing Cell Performance
Open accessAbstract
Lithium/sulfur (Li/S) cells are receiving significant attention as an alternative power source for zero-emission vehicles and advanced electronic devices due to the very high theoretical specific capacity (1675 mA·h/g) of the sulfur cathode. However, the poor cycle life and rate capability have remained a grand challenge, preventing the practical application of this attractive technology. Here, we report that a Li/S cell employing a cetyltrimethyl ammonium bromide (CTAB)-modified sulfur-graphene oxide (S-GO) nanocomposite cathode can be discharged at rates as high as 6C (1C = 1.675 A/g of sulfur) and charged at rates as high as 3C while still maintaining high specific capacity (~ 800 mA·h/g of sulfur at 6C), with a long cycle life exceeding 1500 cycles and an extremely low decay rate (0.039% per cycle), perhaps the best performance demonstrated so far for a Li/S cell. The initial estimated cell-level specific energy of our cell was ~ 500 W·h/kg, which is much higher than that of current Li-ion cells (~ 200 W·h/kg). Even after 1500 cycles, we demonstrate a very high specific capacity (~ 740 mA·h/g of sulfur), which corresponds to ~ 414 mA·h/g of electrode: still higher than state-of-the-art Li-ion cells. Moreover, these Li/S cells with lithium metal electrodes can be cycled with an excellent Coulombic efficiency of 96.3% after 1500 cycles, which was enabled by our new formulation of the ionic liquid-based electrolyte. The performance we demonstrate herein suggests that Li/S cells may already be suitable for high-power applications such as power tools. Li/S cells may now provide a substantial opportunity for the development of zero-emission vehicles with a driving range similar to that of gasoline vehicles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Nanoparticles in cancer therapy and diagnosis
Brigger, I., Dubernet, C., & Couvreur, P. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(02)00044-3 · Cited by 3,039
Lithium-ion batteries. A look into the future
Scrosati, B., Hassoun, J., & Sun, Y.-K. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01388b · Cited by 2,595
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Cited by
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Gür, T. M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01419a · Cited by 2,566
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Application of Ionic Liquids to Energy Storage and Conversion Materials and Devices
Watanabe, M., Thomas, M. L., Zhang, S., Ueno, K., Yasuda, T., & Dokko, K. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00504 · Cited by 1,667
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Sulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410174 · Cited by 1,201
Sun, Z., Zhang, J., Yin, L., Hu, G., Fang, R., Cheng, H.-M., & Li, F. (2017) · Nature Communications · doi:10.1038/ncomms14627 · Cited by 1,135
The rechargeable revolution: a better battery
Van Noorden, R. (2014) · Nature · doi:10.1038/507026a · Cited by 1,047
Smart Textile‐Integrated Microelectronic Systems for Wearable Applications
Shi, J., Liu, S., Zhang, L., Yang, B., Shu, L., Yang, Y., Ren, M., Wang, Y., Chen, J., Chen, W., et al. (2020) · Advanced Materials · doi:10.1002/adma.201901958 · Cited by 822
Li, G., Sun, J., Hou, W., Jiang, S., Huang, Y., & Geng, J. (2016) · Nature Communications · doi:10.1038/ncomms10601 · Cited by 806
Pang, Q., Tang, J., Huang, H., Liang, X., Hart, C., Tam, K. C., & Nazar, L. F. (2015) · Advanced Materials · doi:10.1002/adma.201502467 · Cited by 780
2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li–S batteries
Cha, E., Patel, M. D., Park, J., Hwang, J., Prasad, V., Cho, K., & Choi, W. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0061-y · Cited by 767
High-Rate, Ultralong Cycle-Life Lithium/Sulfur Batteries Enabled by Nitrogen-Doped Graphene
Qiu, Y., Li, W., Zhao, W., Li, G., Hou, Y., Liu, M., Zhou, L., Ye, F., Li, H., Wei, Z., et al. (2014) · Nano Letters · doi:10.1021/nl5020475 · Cited by 738
Self-citationThe role of nanotechnology in the development of battery materials for electric vehicles
Lu, J., Chen, Z., Ma, Z., Pan, F., Curtiss, L. A., & Amine, K. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.207 · Cited by 700
Graphene oxide: A promising nanomaterial for energy and environmental applications
Li, F., Jiang, X., Zhao, J., & Zhang, S. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.07.014 · Cited by 674
Recent Advances in Electrolytes for Lithium–Sulfur Batteries
Zhang, S., Ueno, K., Dokko, K., & Watanabe, M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500117 · Cited by 616
Ionic liquids and derived materials for lithium and sodium batteries
Yang, Q., Zhang, Z., Sun, X.-G., Hu, Y.-S., Xing, H., & Dai, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00464h · Cited by 601
Seh, Z. W., Yu, J. H., Li, W., Hsu, P.-C., Wang, H., Sun, Y., Yao, H., Zhang, Q., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6017 · Cited by 600
Electrolyte solutions design for lithium-sulfur batteries
Liu, Y., Elias, Y., Meng, J., Aurbach, D., Zou, R., Xia, D., & Pang, Q. (2021) · Joule · doi:10.1016/j.joule.2021.06.009 · Cited by 534
Structural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
Carbon nanomaterials for advanced lithium sulfur batteries
Xu, Z.-L., Kim, J.-K., & Kang, K. (2018) · Nano Today · doi:10.1016/j.nantod.2018.02.006 · Cited by 454
Griebel, J. J., Glass, R. S., Char, K., & Pyun, J. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.04.003 · Cited by 446
A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries
Pang, Q., Kundu, D., & Nazar, L. F. (2016) · Materials Horizons · doi:10.1039/c5mh00246j · Cited by 424
Zhang, J., Yang, C., Yin, Y., Wan, L., & Guo, Y. (2016) · Advanced Materials · doi:10.1002/adma.201602913 · Cited by 418
Pang, Q., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07347 · Cited by 411
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
A Graphene-like Oxygenated Carbon Nitride Material for Improved Cycle-Life Lithium/Sulfur Batteries
Liu, J., Li, W., Duan, L., Li, X., Ji, L., Geng, Z., Huang, K., Lu, L., Zhou, L., Liu, Z., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01919 · Cited by 401
Self-citationLithium–sulfur batteries: from liquid to solid cells
Lin, Z., & Liang, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04727c · Cited by 399
Cheng, X.-B., Yan, C., Huang, J.-Q., Li, P., Zhu, L., Zhao, L., Zhang, Y., Zhu, W., Yang, S.-T., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.09.003 · Cited by 394
Self-citationUnique behaviour of nonsolvents for polysulphides in lithium–sulphur batteries
Cuisinier, M., Cabelguen, P.-E., Adams, B. D., Garsuch, A., Balasubramanian, M., & Nazar, L. F. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00372a · Cited by 393
A review of recent developments in rechargeable lithium–sulfur batteries
Kang, W., Deng, N., Ju, J., Li, Q., Wu, D., Ma, X., Li, L., Naebe, M., & Cheng, B. (2016) · Nanoscale · doi:10.1039/c6nr04923k · Cited by 391
Betz, J., Bieker, G., Meister, P., Placke, T., Winter, M., & Schmuch, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803170 · Cited by 390
M. Gür, T. (2018) · Energy & Environmental Science · doi:10.1039/c8ee90053a · Cited by 374
Su, D., Cortie, M., & Wang, G. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602014 · Cited by 360
A Revolution in Electrodes: Recent Progress in Rechargeable Lithium–Sulfur Batteries
Fang, X., & Peng, H. (2015) · Small · doi:10.1002/smll.201402354 · Cited by 346
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0171514jes · Cited by 323
Xu, J., Ma, J., Fan, Q., Guo, S., & Dou, S. (2017) · Advanced Materials · doi:10.1002/adma.201606454 · Cited by 319
Nazar, L. F., Cuisinier, M., & Pang, Q. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.86 · Cited by 314
Sulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie · doi:10.1002/ange.201410174 · Cited by 313
Two‐dimensional MXenes for lithium‐sulfur batteries
Zhang, C. (., Cui, L., Abdolhosseinzadeh, S., & Heier, J. (2020) · InfoMat · doi:10.1002/inf2.12080 · Cited by 308
Gueon, D., Hwang, J. T., Yang, S. B., Cho, E., Sohn, K., Yang, D.-K., & Moon, J. H. (2018) · ACS Nano · doi:10.1021/acsnano.7b05869 · Cited by 300
A Review of Concepts, Benefits, and Challenges for Future Electrical Propulsion-Based Aircraft
Sahoo, S., Zhao, X., & Kyprianidis, K. (2020) · Aerospace · doi:10.3390/aerospace7040044 · Cited by 287
Durable Carbon-Coated Li2S Core–Shell Spheres for High Performance Lithium/Sulfur Cells
Nan, C., Lin, Z., Liao, H., Song, M.-K., Li, Y., & Cairns, E. J. (2014) · Journal of the American Chemical Society · doi:10.1021/ja412943h · Cited by 282
Self-citationMcCloskey, B. D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01814 · Cited by 281
Designing a Quinone-Based Redox Mediator to Facilitate Li2S Oxidation in Li-S Batteries
Tsao, Y., Lee, M., Miller, E. C., Gao, G., Park, J., Chen, S., Katsumata, T., Tran, H., Wang, L.-W., Toney, M. F., et al. (2019) · Joule · doi:10.1016/j.joule.2018.12.018 · Cited by 277
Graphene materials for lithium–sulfur batteries
Yu, M., Li, R., Wu, M., & Shi, G. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.08.004 · Cited by 268
Hierarchical carbon nanocages confining high-loading sulfur for high-rate lithium–sulfur batteries
Lyu, Z., Xu, D., Yang, L., Che, R., Feng, R., Zhao, J., Li, Y., Wu, Q., Wang, X., & Hu, Z. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.01.033 · Cited by 258
Zhang, Y., Gao, Z., Song, N., & Li, X. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.11.099 · Cited by 192
Self-citationMicroporous carbon nanosheets derived from corncobs for lithium–sulfur batteries
Guo, J., Zhang, J., Jiang, F., Zhao, S., Su, Q., & Du, G. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.07.077 · Cited by 175
Mueller, J.-K., Bensmann, A., Bensmann, B., Fischer, T., Kadyk, T., Narjes, G., Kauth, F., Ponick, B., Seume, J., Krewer, U., et al. (2018) · Energies · doi:10.3390/en11010179 · Cited by 17
Metadata
- Authors
- Song, M.-K., Zhang, Y., & Cairns, E. J.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-11-14
- Volume
- 13
- Issue
- 12
- Pages
- 5891-5899
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2018008417
- Cited by
- 427
- References
- 42
- FWCI
- 38.14
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.