The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Three-dimensional photopatterning of hydrogels using stereolithography for long-term cell encapsulation
Abstract
Cell-encapsulated hydrogels with complex three-dimensional (3D) structures were fabricated from photopolymerizable poly(ethylene glycol) diacrylate (PEGDA) using modified 'top-down' and 'bottoms-up' versions of a commercially available stereolithography apparatus (SLA). Swelling and mechanical properties were measured for PEGDA hydrogels with molecular weights (M(w)) ranging from 700 to 10 000 Daltons (Da). Long-term viability of encapsulated NIH/3T3 cells was quantitatively evaluated using an MTS assay and shown to improve over 14 days by increasing the M(w) of the hydrogels. Addition of adhesive RGDS peptide sequences resulted in increased cell viability, proliferation, and spreading compared to pristine PEG hydrogels of the same M(w). Spatial 3D layer-by-layer cell patterning was successfully demonstrated, and the feasibility of depositing multiple cell types and material compositions into distinct layers was established.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Matrix elasticity directs stem cell lineage specification
Engler, A. J., Sen, S., Sweeney, H. L., & Discher, D. E. (2006) · Cell · doi:10.1016/j.cell.2006.06.044 · Cited by 13,915
Tissue Cells Feel and Respond to the Stiffness of Their Substrate
Discher, D. E., Janmey, P., & Wang, Y.-L. (2005) · Science · doi:10.1126/science.1116995 · Cited by 6,382
Hydrogels for tissue engineering: scaffold design variables and applications
Drury, J. L., & Mooney, D. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00340-5 · Cited by 5,136
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
PEG Hydrogels for the Controlled Release of Biomolecules in Regenerative Medicine
Lin, C.-C., & Anseth, K. S. (2009) · Pharmaceutical Research · doi:10.1007/s11095-008-9801-2 · Cited by 1,063
Incorporation of adhesion peptides into nonadhesive hydrogels useful for tissue resurfacing
Hern, D. L., & Hubbell, J. A. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199802)39:2<266::aid-jbm14>3.0.co;2-b · Cited by 904
A review of rapid prototyping techniques for tissue engineering purposes
Peltola, S. M., Melchels, F. P. W., Grijpma, D. W., & Kellomäki, M. (2008) · Annals of Medicine · doi:10.1080/07853890701881788 · Cited by 751
Mann, B. K., Gobin, A. S., Tsai, A. T., Schmedlen, R. H., & West, J. L. (2001) · Biomaterials · doi:10.1016/s0142-9612(01)00051-5 · Cited by 704
Polymeric Biomaterials with Degradation Sites for Proteases Involved in Cell Migration
West, J. L., & Hubbell, J. A. (1999) · Macromolecules · doi:10.1021/ma981296k · Cited by 625
Review: Photopolymerizable and Degradable Biomaterials for Tissue Engineering Applications
Ifkovits, J. L., & Burdick, J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0093 · Cited by 619
Cited by
Yuk, H., Lu, B., & Zhao, X. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00595h · Cited by 2,108
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Photopolymerization in 3D Printing
Bagheri, A., & Jin, J. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00165 · Cited by 1,436
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
The upcoming 3D-printing revolution in microfluidics
Bhattacharjee, N., Urrios, A., Kang, S., & Folch, A. (2016) · Lab on a Chip · doi:10.1039/c6lc00163g · Cited by 1,123
Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing
Kim, S. H., Yeon, Y. K., Lee, J. M., Chao, J. R., Lee, Y. J., Seo, Y. B., Sultan, M. T., Lee, O. J., Lee, J. S., Yoon, S.-I., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03759-y · Cited by 972
Au, A. K., Huynh, W., Horowitz, L. F., & Folch, A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201504382 · Cited by 788
Designing degradable hydrogels for orthogonal control of cell microenvironments
Kharkar, P. M., Kiick, K. L., & Kloxin, A. M. (2013) · Chem. Soc. Rev. · doi:10.1039/c3cs60040h · Cited by 717
Hockaday, L. A., Kang, K. H., Colangelo, N. W., Cheung, P. Y. C., Duan, B., Malone, E., Wu, J., Girardi, L. N., Bonassar, L. J., Lipson, H., et al. (2012) · Biofabrication · doi:10.1088/1758-5082/4/3/035005 · Cited by 683
Gauvin, R., Chen, Y.-C., Lee, J. W., Soman, P., Zorlutuna, P., Nichol, J. W., Bae, H., Chen, S., & Khademhosseini, A. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.048 · Cited by 641
Self-citation3D biofabrication strategies for tissue engineering and regenerative medicine
Bajaj, P., Schweller, R. M., Khademhosseini, A., West, J. L., & Bashir, R. (2014) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071813-105155 · Cited by 632
Self-citationStereolithographic (SLA) 3D printing of oral modified-release dosage forms
Wang, J., Goyanes, A., Gaisford, S., & Basit, A. W. (2016) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2016.03.016 · Cited by 612
Current and emerging applications of 3D printing in medicine
Liaw, C.-Y., & Guvendiren, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7279 · Cited by 604
Volumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds
Bernal, P. N., Delrot, P., Loterie, D., Li, Y., Malda, J., Moser, C., & Levato, R. (2019) · Advanced Materials · doi:10.1002/adma.201904209 · Cited by 604
Recent progress in metal-organic frameworks-based hydrogels and aerogels and their applications
Wang, L., Xu, H., Gao, J., Yao, J., & Zhang, Q. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.213016 · Cited by 594
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Yu, C., Schimelman, J., Wang, P., Miller, K. L., Ma, X., You, S., Guan, J., Sun, B., Zhu, W., & Chen, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00810 · Cited by 579
Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture
Zhu, W., Qu, X., Zhu, J., Ma, X., Patel, S., Liu, J., Wang, P., Lai, C. S. E., Gou, M., Xu, Y., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.01.042 · Cited by 567
Vaezi, M., Chianrabutra, S., Mellor, B., & Yang, S. (2013) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.778175 · Cited by 548
3D printing of highly stretchable hydrogel with diverse UV curable polymers
Ge, Q., Chen, Z., Cheng, J., Zhang, B., Zhang, Y.-F., Li, H., He, X., Yuan, C., Liu, J., Magdassi, S., et al. (2021) · Science Advances · doi:10.1126/sciadv.aba4261 · Cited by 518
Goyanes, A., Det-Amornrat, U., Wang, J., Basit, A. W., & Gaisford, S. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.05.034 · Cited by 490
Mondschein, R. J., Kanitkar, A., Williams, C. B., Verbridge, S. S., & Long, T. E. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.005 · Cited by 475
Fiber-based tissue engineering: progress, challenges, and opportunities
Tamayol, A., Akbari, M., Annabi, N., Paul, A., Khademhosseini, A., & Juncker, D. (2013) · Biotechnology Advances · doi:10.1016/j.biotechadv.2012.11.007 · Cited by 458
Three-dimensionally printed biological machines powered by skeletal muscle
Cvetkovic, C., Raman, R., Chan, V., Williams, B. J., Tolish, M., Bajaj, P., Sakar, M. S., Asada, H. H., Saif, M. T. A., & Bashir, R. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1401577111 · Cited by 443
Self-citationSpatiotemporal hydrogel biomaterials for regenerative medicine
Brown, T. E., & Anseth, K. S. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00445a · Cited by 428
Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Microfabricated Biomaterials for Engineering 3D Tissues
Zorlutuna, P., Annabi, N., Camci‐Unal, G., Nikkhah, M., Cha, J. M., Nichol, J. W., Manbachi, A., Bae, H., Chen, S., & Khademhosseini, A. (2012) · Advanced Materials · doi:10.1002/adma.201104631 · Cited by 394
Self-citationLin, H., Zhang, D., Alexander, P. G., Yang, G., Tan, J., Cheng, A. W.-M., & Tuan, R. S. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.09.048 · Cited by 382
Recent Advances in Analytical Chemistry by 3D Printing
Gross, B., Lockwood, S. Y., & Spence, D. M. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b04344 · Cited by 359
Stereolithography in tissue engineering
Skoog, S. A., Goering, P. L., & Narayan, R. J. (2014) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-013-5107-y · Cited by 321
Design and Printing Strategies in 3D Bioprinting of Cell‐Hydrogels: A Review
Lee, J. M., & Yeong, W. Y. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600435 · Cited by 310
Bio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs
Lim, K. S., Levato, R., Costa, P. F., Castilho, M. D., Alcala-Orozco, C. R., van Dorenmalen, K. M. A., Melchels, F. P. W., Gawlitta, D., Hooper, G. J., Malda, J., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aac00c · Cited by 296
Structured Macroporous Hydrogels: Progress, Challenges, and Opportunities
De France, K. J., Xu, F., & Hoare, T. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700927 · Cited by 279
3D-printing of transparent bio-microfluidic devices in PEG-DA
Urrios, A., Parra-Cabrera, C., Bhattacharjee, N., Gonzalez-Suarez, A. M., Rigat-Brugarolas, L. G., Nallapatti, U., Samitier, J., DeForest, C. A., Posas, F., Garcia-Cordero, J. L., et al. (2016) · Lab on a Chip · doi:10.1039/c6lc00153j · Cited by 274
Fabrication of drug-loaded hydrogels with stereolithographic 3D printing
Martinez, P. R., Goyanes, A., Basit, A. W., & Gaisford, S. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.09.003 · Cited by 274
Bio‐Origami Hydrogel Scaffolds Composed of Photocrosslinked PEG Bilayers
Jamal, M., Kadam, S. S., Xiao, R., Jivan, F., Onn, T., Fernandes, R., Nguyen, T. D., & Gracias, D. H. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200458 · Cited by 270
Self-folding devices and materials for biomedical applications
Randall, C. L., Gultepe, E., & Gracias, D. H. (2012) · Trends in Biotechnology · doi:10.1016/j.tibtech.2011.06.013 · Cited by 269
Szymczyk-Ziółkowska, P., Łabowska, M. B., Detyna, J., Michalak, I., & Gruber, P. (2020) · Biocybernetics and Biomedical Engineering · doi:10.1016/j.bbe.2020.01.015 · Cited by 266
Tissue engineering by decellularization and 3D bioprinting
Garreta, E., Oria, R., Tarantino, C., Pla-Roca, M., Prado, P., Fernández-Avilés, F., Campistol, J. M., Samitier, J., & Montserrat, N. (2017) · Materials Today · doi:10.1016/j.mattod.2016.12.005 · Cited by 263
Digital Light Processing Based Bioprinting with Composable Gradients
Wang, M., Li, W., Mille, L. S., Ching, T., Luo, Z., Tang, G., Garciamendez, C. E., Lesha, A., Hashimoto, M., & Zhang, Y. S. (2022) · Advanced Materials · doi:10.1002/adma.202107038 · Cited by 206
Hsiao, A. Y., Tung, Y.-C., Kuo, C.-H., Mosadegh, B., Bedenis, R., Pienta, K. J., & Takayama, S. (2012) · Biomedical Microdevices · doi:10.1007/s10544-011-9608-5 · Cited by 129
Hakim Khalili, M., Zhang, R., Wilson, S., Goel, S., Impey, S. A., & Aria, A. I. (2023) · Polymers · doi:10.3390/polym15102341 · Cited by 114
Stereolithography 3D printing technology in pharmaceuticals: a review
Deshmane, S., Kendre, P., Mahajan, H., & Jain, S. (2021) · Drug Development and Industrial Pharmacy · doi:10.1080/03639045.2021.1994990 · Cited by 103
3D hydrogel-based microwell arrays as a tumor microenvironment model to study breast cancer growth
Casey, J., Yue, X., Nguyen, T. D., Acun, A., Zellmer, V. R., Zhang, S., & Zorlutuna, P. (2017) · Biomedical Materials · doi:10.1088/1748-605x/aa5d5c · Cited by 74
Self-citation
Metadata
- Authors
- Chan, V., Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R.
- Venue
- Lab on a Chip
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 10
- Issue
- 16
- Pages
- 2062
- ISSN
- 1473-0189 (ISSN-L)
- 1473-0197
- OpenAlex
- W2117035634
- Cited by
- 468
- References
- 38
- FWCI
- 15.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.