The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Depleted hole conductor-free lead halide iodide heterojunction solar cells
Abstract
Lead halide perovskite is an excellent candidate for use as a light harvester in solar cells. Our work presents a depleted hole conductor free CH3NH3PbI3/TiO2 heterojunction solar cell using a thick CH3NH3PbI3 film. The CH3NH3PbI3 formed large crystals which function simultaneously as light harvesters and as hole transport materials. We performed capacitance voltage measurements, which show a depletion region which extends to both n and p sides. The built-in field of the depletion region assists in the charge separation and suppresses the back reaction of electrons from the TiO2 film to the CH3NH3PbI3 film. This depleted hole conductor free CH3NH3PbI3/TiO2 heterojunction solar cell provides a power conversion efficiency of 8% with a current density of 18.8 mA cm−2, the highest efficiency achieved to date for perovskite based solar cells without a hole conductor.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Heo, J. H., Im, S. H., Noh, J. H., Mandal, T. N., Lim, C.-S., Chang, J. A., Lee, Y. H., Kim, H.-J., Sarkar, A., Nazeeruddin, M. K., et al. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.80 · Cited by 2,684
Baikie, T., Fang, Y., Kadro, J. M., Schreyer, M., Wei, F., Mhaisalkar, S. G., Graetzel, M., & White, T. J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10518k · Cited by 2,534
Organic-Inorganic Hybrid Materials as Semiconducting Channels in Thin-Film Field-Effect Transistors
Kagan, C. R., Mitzi, D. B., & Dimitrakopoulos, C. D. (1999) · Science · doi:10.1126/science.286.5441.945 · Cited by 2,110
Mesoscopic CH3NH3PbI3/TiO2Heterojunction Solar Cells
Etgar, L., Gao, P., Xue, Z., Peng, Q., Chandiran, A. K., Liu, B., Nazeeruddin, M. K., & Grätzel, M. (2012) · Journal of the American Chemical Society · doi:10.1021/ja307789s · Cited by 1,946
Self-citationAll-solid-state dye-sensitized solar cells with high efficiency
Chung, I., Lee, B., He, J., Chang, R. P. H., & Kanatzidis, M. G. (2012) · Nature · doi:10.1038/nature11067 · Cited by 1,833
Cited by
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
Lead-free solid-state organic–inorganic halide perovskite solar cells
Hao, F., Stoumpos, C. C., Cao, D. H., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.82 · Cited by 3,026
Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process
Chen, Q., Zhou, H., Hong, Z., Luo, S., Duan, H.-S., Wang, H.-H., Liu, Y., Li, G., & Yang, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja411509g · Cited by 2,306
Perovskite solar cells: an emerging photovoltaic technology
Park, N.-G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.07.007 · Cited by 2,097
Review of recent progress in chemical stability of perovskite solar cells
Niu, G., Guo, X., & Wang, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04994b · Cited by 1,965
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications
Zhao, Y., & Zhu, K. (2016) · Chemical Society Reviews · doi:10.1039/c4cs00458b · Cited by 1,661
Defect migration in methylammonium lead iodide and its role in perovskite solar cell operation
Azpiroz, J. M., Mosconi, E., Bisquert, J., & De Angelis, F. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01265a · Cited by 1,644
Perovskite Solar Cells: From Materials to Devices
Jung, H. S., & Park, N. (2015) · Small · doi:10.1002/smll.201402767 · Cited by 1,587
Hao, F., Stoumpos, C. C., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5033259 · Cited by 1,501
Low-Temperature Solution-Processed Perovskite Solar Cells with High Efficiency and Flexibility
You, J., Hong, Z., Yang, Y. (., Chen, Q., Cai, M., Song, T.-B., Chen, C.-C., Lu, S., Liu, Y., Zhou, H., et al. (2014) · ACS Nano · doi:10.1021/nn406020d · Cited by 1,448
Halide perovskite materials for solar cells: a theoretical review
Yin, W.-J., Yang, J.-H., Kang, J., Yan, Y., & Wei, S.-H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05033a · Cited by 1,437
Organohalide lead perovskites for photovoltaic applications
Gao, P., Grätzel, M., & Nazeeruddin, M. K. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00942h · Cited by 1,410
Amat, A., Mosconi, E., Ronca, E., Quarti, C., Umari, P., Nazeeruddin, M. K., Grätzel, M., & De Angelis, F. (2014) · Nano Letters · doi:10.1021/nl5012992 · Cited by 1,285
Understanding the physical properties of hybrid perovskites for photovoltaic applications
Huang, J., Yuan, Y., Shao, Y., & Yan, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.42 · Cited by 1,252
Under the spotlight: The organic–inorganic hybrid halide perovskite for optoelectronic applications
Chen, Q., De Marco, N., Yang, Y. (., Song, T.-B., Chen, C.-C., Zhao, H., Hong, Z., Zhou, H., & Yang, Y. (2015) · Nano Today · doi:10.1016/j.nantod.2015.04.009 · Cited by 1,154
Perovskite as Light Harvester: A Game Changer in Photovoltaics
Kazim, S., Nazeeruddin, M. K., Grätzel, M., & Ahmad, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201308719 · Cited by 962
The Role of Intrinsic Defects in Methylammonium Lead Iodide Perovskite
Kim, J., Lee, S.-H., Lee, J. H., & Hong, K.-H. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500370k · Cited by 906
Wu, Y., Islam, A., Yang, X., Qin, C., Liu, J., Zhang, K., Peng, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01624f · Cited by 887
Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications
Jung, M., Ji, S.-G., Kim, G., & Seok, S. I. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00656c · Cited by 816
Advancements in perovskite solar cells: photophysics behind the photovoltaics
Sum, T. C., & Mathews, N. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00673a · Cited by 778
Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition
Barrows, A. T., Pearson, A. J., Kwak, C. K., Dunbar, A. D. F., Buckley, A. R., & Lidzey, D. G. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01546k · Cited by 765
Organolead Halide Perovskite: New Horizons in Solar Cell Research
Kim, H.-S., Im, S. H., & Park, N.-G. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp409025w · Cited by 722
A dopant-free hole-transporting material for efficient and stable perovskite solar cells
Liu, J., Wu, Y., Qin, C., Yang, X., Yasuda, T., Islam, A., Zhang, K., Peng, W., Chen, W., & Han, L. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01589d · Cited by 719
Ye, M., Wen, X., Wang, M., Iocozzia, J., Zhang, N., Lin, C., & Lin, Z. (2015) · Materials Today · doi:10.1016/j.mattod.2014.09.001 · Cited by 713
Role of the Selective Contacts in the Performance of Lead Halide Perovskite Solar Cells
Juarez-Perez, E. J., Wuβler, M., Fabregat-Santiago, F., Lakus-Wollny, K., Mankel, E., Mayer, T., Jaegermann, W., & Mora-Sero, I. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500059v · Cited by 650
Perovskite-based solar cells: impact of morphology and device architecture on device performance
Salim, T., Sun, S., Abe, Y., Krishna, A., Grimsdale, A. C., & Lam, Y. M. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05226a · Cited by 602
It's a trap! On the nature of localised states and charge trapping in lead halide perovskites
Jin, H., Debroye, E., Keshavarz, M., Scheblykin, I. G., Roeffaers, M. B. J., Hofkens, J., & Steele, J. A. (2020) · Materials Horizons · doi:10.1039/c9mh00500e · Cited by 589
NH2CH═NH2PbI3: An Alternative Organolead Iodide Perovskite Sensitizer for Mesoscopic Solar Cells
Pang, S., Hu, H., Zhang, J., Lv, S., Yu, Y., Wei, F., Qin, T., Xu, H., Liu, Z., & Cui, G. (2014) · Chemistry of Materials · doi:10.1021/cm404006p · Cited by 580
Recent progress in electron transport layers for efficient perovskite solar cells
Yang, G., Tao, H., Qin, P., Ke, W., & Fang, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09011c · Cited by 579
Edri, E., Kirmayer, S., Henning, A., Mukhopadhyay, S., Gartsman, K., Rosenwaks, Y., Hodes, G., & Cahen, D. (2014) · Nano Letters · doi:10.1021/nl404454h · Cited by 564
Halide Perovskites: Is It All about the Interfaces?
Schulz, P., Cahen, D., & Kahn, A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00558 · Cited by 558
Zhao, Y., & Zhu, K. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp502696w · Cited by 555
Jeon, N. J., Lee, J., Noh, J. H., Nazeeruddin, M. K., Grätzel, M., & Seok, S. I. (2013) · Journal of the American Chemical Society · doi:10.1021/ja410659k · Cited by 551
Materials and Methods for Interface Engineering toward Stable and Efficient Perovskite Solar Cells
Chen, J., & Park, N.-G. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01240 · Cited by 521
Shi, J., Dong, J., Lv, S., Xu, Y., Zhu, L., Xiao, J., Xu, X., Wu, H., Li, D., Luo, Y., et al. (2014) · Applied Physics Letters · doi:10.1063/1.4864638 · Cited by 505
Laminated Carbon Nanotube Networks for Metal Electrode-Free Efficient Perovskite Solar Cells
Li, Z., Kulkarni, S. A., Boix, P. P., Shi, E., Cao, A., Fu, K., Batabyal, S. K., Zhang, J., Xiong, Q., Wong, L. H., et al. (2014) · ACS Nano · doi:10.1021/nn501096h · Cited by 492
Beyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells
Rong, Y., Liu, L., Mei, A., Li, X., & Han, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501066 · Cited by 473
Yu, Z., & Sun, L. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500213 · Cited by 462
Fully Printable Mesoscopic Perovskite Solar Cells with Organic Silane Self-Assembled Monolayer
Liu, L., Mei, A., Liu, T., Jiang, P., Sheng, Y., Zhang, L., & Han, H. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5125594 · Cited by 460
Compact Layer Free Perovskite Solar Cells with 13.5% Efficiency
Liu, D., Yang, J., & Kelly, T. L. (2014) · Journal of the American Chemical Society · doi:10.1021/ja508758k · Cited by 460
Thermally stable, planar hybrid perovskite solar cells with high efficiency
Choi, K., Lee, J., Kim, H. I., Park, C. W., Kim, G.-W., Choi, H., Park, S., Park, S. A., & Park, T. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02242a · Cited by 458
Wei, Z., Chen, H., Yan, K., & Yang, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201408638 · Cited by 456
p-type Mesoscopic Nickel Oxide/Organometallic Perovskite Heterojunction Solar Cells
Wang, K.-C., Jeng, J.-Y., Shen, P.-S., Chang, Y.-C., Diau, E. W.-G., Tsai, C.-H., Chao, T.-Y., Hsu, H.-C., Lin, P.-Y., Chen, P., et al. (2014) · Scientific Reports · doi:10.1038/srep04756 · Cited by 444
Stability of perovskite solar cells: issues and prospects
Chowdhury, T. A., Bin Zafar, M. A., Sajjad-Ul Islam, M., Shahinuzzaman, M., Islam, M. A., & Khandaker, M. U. (2023) · RSC Advances · doi:10.1039/d2ra05903g · Cited by 444
Organohalide Lead Perovskites for Photovoltaic Applications
Yusoff, A. R. B. M., & Nazeeruddin, M. K. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02893 · Cited by 439
Yang, G., Wang, C., Lei, H., Zheng, X., Qin, P., Xiong, L., Zhao, X., Yan, Y., & Fang, G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08783c · Cited by 437
Dual nature of the excited state in organic–inorganic lead halide perovskites
Stamplecoskie, K. G., Manser, J. S., & Kamat, P. V. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02988g · Cited by 432
Yella, A., Heiniger, L.-P., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nano Letters · doi:10.1021/nl500399m · Cited by 430
Leijtens, T., Stranks, S. D., Eperon, G. E., Lindblad, R., Johansson, E. M. J., McPherson, I. J., Rensmo, H., Ball, J. M., Lee, M. M., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn502115k · Cited by 426
Is Excess PbI2 Beneficial for Perovskite Solar Cell Performance?
Liu, F., Dong, Q., Wong, M. K., Djurišić, A. B., Ng, A., Ren, Z., Shen, Q., Surya, C., Chan, W. K., Wang, J., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502206 · Cited by 425
A Review on Additives for Halide Perovskite Solar Cells
Liu, S., Guan, Y., Sheng, Y., Hu, Y., Rong, Y., Mei, A., & Han, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902492 · Cited by 425
Light trapping in mesoporous solar cells with plasmonic nanostructures
Erwin, W. R., Zarick, H. F., Talbert, E. M., & Bardhan, R. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03847b · Cited by 422
Hao, F., Stoumpos, C. C., Liu, Z., Chang, R. P. H., & Kanatzidis, M. G. (2014) · Journal of the American Chemical Society · doi:10.1021/ja509245x · Cited by 413
Duan, H.-S., Zhou, H., Chen, Q., Sun, P., Luo, S., Song, T.-B., Bob, B., & Yang, Y. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp04479g · Cited by 395
Interfaces in Perovskite Solar Cells
Shi, J., Xu, X., Li, D., & Meng, Q. (2015) · Small · doi:10.1002/smll.201403534 · Cited by 395
Effect of CH3NH3PbI3thickness on device efficiency in planar heterojunction perovskite solar cells
Liu, D., Gangishetty, M. K., & Kelly, T. L. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02637c · Cited by 393
Chen, H., & Yang, S. (2017) · Advanced Materials · doi:10.1002/adma.201603994 · Cited by 384
Improving the Long-Term Stability of Perovskite Solar Cells with a Porous Al2O3 Buffer Layer
Guarnera, S., Abate, A., Zhang, W., Foster, J. M., Richardson, G., Petrozza, A., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502703p · Cited by 381
Perovskite Solar Cell with an Efficient TiO2 Compact Film
Ke, W., Fang, G., Wang, J., Qin, P., Tao, H., Lei, H., Liu, Q., Dai, X., & Zhao, X. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am503728d · Cited by 354
Energy Level Alignment at Interfaces in Metal Halide Perovskite Solar Cells
Wang, S., Sakurai, T., Wen, W., & Qi, Y. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800260 · Cited by 350
Interfaces in Perovskite Solar Cells
Fakharuddin, A., Schmidt‐Mende, L., Garcia‐Belmonte, G., Jose, R., & Mora‐Sero, I. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700623 · Cited by 349
Chen, W., Zhou, Y., Chen, G., Wu, Y., Tu, B., Liu, F., Huang, L., Ng, A. M. C., Djurišić, A. B., & He, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803872 · Cited by 348
Chen, H., Wei, Z., He, H., Zheng, X., Wong, K. S., & Yang, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502087 · Cited by 348
Chiang, C.-H., Tseng, Z.-L., & Wu, C.-G. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03674c · Cited by 338
Gottesman, R., Haltzi, E., Gouda, L., Tirosh, S., Bouhadana, Y., Zaban, A., Mosconi, E., & De Angelis, F. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501373f · Cited by 333
Fundamental Understanding of Photocurrent Hysteresis in Perovskite Solar Cells
Liu, P., Wang, W., Liu, S., Yang, H., & Shao, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803017 · Cited by 321
Numerical simulation: Toward the design of high-efficiency planar perovskite solar cells
Liu, F., Zhu, J., Wei, J., Li, Y., Lv, M., Yang, S., Zhang, B., Yao, J., & Dai, S. (2014) · Applied Physics Letters · doi:10.1063/1.4885367 · Cited by 319
Titanate and titania nanostructured materials for environmental and energy applications: a review
Zhang, Y., Jiang, Z., Huang, J., Lim, L. Y., Li, W., Deng, J., Gong, D., Tang, Y., Lai, Y., & Chen, Z. (2015) · RSC Advances · doi:10.1039/c5ra11298b · Cited by 318
Superior Photovoltaic Properties of Lead Halide Perovskites: Insights from First-Principles Theory
Yin, W.-J., Shi, T., & Yan, Y. (2015) · The Journal of Physical Chemistry C · doi:10.1021/jp512077m · Cited by 314
Quarti, C., Mosconi, E., & De Angelis, F. (2014) · Chemistry of Materials · doi:10.1021/cm5032046 · Cited by 313
Zhao, Y., Nardes, A. M., & Zhu, K. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500003v · Cited by 303
Cost-efficient clamping solar cells using candle soot for hole extraction from ambipolar perovskites
Wei, Z., Yan, K., Chen, H., Yi, Y., Zhang, T., Long, X., Li, J., Zhang, L., Wang, J., & Yang, S. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01983k · Cited by 299
Song, Z., Watthage, S. C., Phillips, A. B., & Heben, M. J. (2016) · Journal of Photonics for Energy · doi:10.1117/1.jpe.6.022001 · Cited by 297
Liu, J., Gao, C., He, X., Ye, Q., Ouyang, L., Zhuang, D., Liao, C., Mei, J., & Lau, W. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06780 · Cited by 291
Sepalage, G. A., Meyer, S., Pascoe, A., Scully, A. D., Huang, F., Bach, U., Cheng, Y., & Spiccia, L. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502541 · Cited by 290
Zhou, H., Shi, Y., Dong, Q., Zhang, H., Xing, Y., Wang, K., Du, Y., & Ma, T. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5017069 · Cited by 290
Depletion region effect of highly efficient hole conductor free CH3NH3PbI3perovskite solar cells
Aharon, S., Gamliel, S., Cohen, B. E., & Etgar, L. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp00460d · Cited by 285
Self-citationCarbon-Based CsPbBr3 Perovskite Solar Cells: All-Ambient Processes and High Thermal Stability
Chang, X., Li, W., Zhu, L., Liu, H., Geng, H., Xiang, S., Liu, J., & Chen, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11393 · Cited by 285
Zhang, F., Yang, X., Wang, H., Cheng, M., Zhao, J., & Sun, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am504175x · Cited by 282
Hole‐Transporting Materials in Inverted Planar Perovskite Solar Cells
Yan, W., Ye, S., Li, Y., Sun, W., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600474 · Cited by 277
Liu, Y., Hong, Z., Chen, Q., Chen, H., Chang, W., Yang, Y. (., Song, T., & Yang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201504293 · Cited by 270
Huang, L., Sun, X., Li, C., Xu, R., Xu, J., Du, Y., Wu, Y., Ni, J., Cai, H., Li, J., et al. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.08.025 · Cited by 267
Controllable design of solid-state perovskite solar cells by SCAPS device simulation
Tan, K., Lin, P., Wang, G., Liu, Y., Xu, Z., & Lin, Y. (2016) · Solid-State Electronics · doi:10.1016/j.sse.2016.09.012 · Cited by 265
Few‐Layer MoS2 Flakes as Active Buffer Layer for Stable Perovskite Solar Cells
Capasso, A., Matteocci, F., Najafi, L., Prato, M., Buha, J., Cinà, L., Pellegrini, V., Carlo, A. D., & Bonaccorso, F. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600920 · Cited by 259
Song, Z., Watthage, S. C., Phillips, A. B., Tompkins, B. L., Ellingson, R. J., & Heben, M. J. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01017 · Cited by 258
Solution Chemistry Engineering toward High-Efficiency Perovskite Solar Cells
Zhao, Y., & Zhu, K. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501983v · Cited by 257
Inorganic Hole Transporting Materials for Stable and High Efficiency Perovskite Solar Cells
Chen, J., & Park, N.-G. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b01177 · Cited by 255
Solid-State Physics Perspective on Hybrid Perovskite Semiconductors
Even, J., Pedesseau, L., Katan, C., Kepenekian, M., Lauret, J.-S., Sapori, D., & Deleporte, E. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b00695 · Cited by 254
Li, S., Li, Y., Liu, K., Chen, M., Peng, W., Yang, Y., & Li, X. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.150470 · Cited by 11
Metadata
- Authors
- Laban, W. A., & Etgar, L.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 6
- Issue
- 11
- Pages
- 3249
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W1983231611
- Cited by
- 759
- References
- 22
- FWCI
- 60.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.