The DOI matches its Crossref record.
Imprint of sub-25 nm vias and trenches in polymers
Abstract
A nanoimprint process that presses a mold into a thin thermoplastic polymer film on a substrate to create vias and trenches with a minimum size of 25 nm and a depth of 100 nm in the polymer has been demonstrated. Furthermore, the imprint process has been used as a lithography process to fabricate sub-25 nm diameter metal dot arrays of a 100 nm period in a lift-off process. It was found that the nanostructures imprinted in the polymers conform completely with the geometry of the mold. At present, the imprinted size is limited by the size of the mold being used; with a suitable mold, the imprint process should mold sub-10 nm structures with a high aspect ratio in polymers. The nanoimprint process offers a low cost method for mass producing sub-25 nm structures and has the potential to become a key nanolithography method for future manufacturing of integrated circuits and integrated optics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Xia, Y., & Whitesides, G. M. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.153 · Cited by 4,611
Controlling the Synthesis and Assembly of Silver Nanostructures for Plasmonic Applications
Rycenga, M., Cobley, C. M., Zeng, J., Li, W., Moran, C. H., Zhang, Q., Qin, D., & Xia, Y. (2011) · Chemical Reviews · doi:10.1021/cr100275d · Cited by 2,828
New Approaches to Nanofabrication: Molding, Printing, and Other Techniques
Gates, B. D., Xu, Q., Stewart, M., Ryan, D., Willson, C. G., & Whitesides, G. M. (2005) · Chemical Reviews · doi:10.1021/cr030076o · Cited by 2,020
Nanoimprint Lithography: Methods and Material Requirements
Guo, L. J. (2007) · Advanced Materials · doi:10.1002/adma.200600882 · Cited by 1,842
Anti-reflective coatings: A critical, in-depth review
Raut, H. K., Ganesh, V. A., Nair, A. S., & Ramakrishna, S. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01297e · Cited by 1,463
Effects of synthetic micro- and nano-structured surfaces on cell behavior
Flemming, R. G., Murphy, C. J., Abrams, G. A., Goodman, S. L., & Nealey, P. F. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00209-9 · Cited by 1,450
SEMICONDUCTOR NANOWIRES AND NANOTUBES
Law, M., Goldberger, J., & Yang, P. (2004) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.34.040203.112300 · Cited by 1,369
One-dimensional ZnO nanostructures: Solution growth and functional properties
Xu, S., & Wang, Z. L. (2011) · Nano Research · doi:10.1007/s12274-011-0160-7 · Cited by 1,361
Sub-10 nm imprint lithography and applications
Chou, S. Y., Krauss, P. R., Zhang, W., Guo, L., & Zhuang, L. (1997) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.589752 · Cited by 1,113
Self-citationMicrofabricating Conjugated Polymer Actuators
Jager, E. W. H., Smela, E., & Inganäs, O. (2000) · Science · doi:10.1126/science.290.5496.1540 · Cited by 962
Review on micro molding of thermoplastic polymers
Heckele, M., & Schomburg, W. K. (2004) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/14/3/r01 · Cited by 915
Recent progress in nanoimprint technology and its applications
Guo, L. J. (2004) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/37/11/r01 · Cited by 733
Nanoimprint lithography: An old story in modern times? A review
Schift, H. (2008) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.2890972 · Cited by 726
Memristor−CMOS Hybrid Integrated Circuits for Reconfigurable Logic
Xia, Q., Robinett, W., Cumbie, M. W., Banerjee, N., Cardinali, T. J., Yang, J. J., Wu, W., Li, X., Tong, W. M., Strukov, D. B., et al. (2009) · Nano Letters · doi:10.1021/nl901874j · Cited by 671
High‐Speed Roll‐to‐Roll Nanoimprint Lithography on Flexible Plastic Substrates
Ahn, S. H., & Guo, L. J. (2008) · Advanced Materials · doi:10.1002/adma.200702650 · Cited by 618
Convery, N., & Gadegaard, N. (2019) · Micro and Nano Engineering · doi:10.1016/j.mne.2019.01.003 · Cited by 602
Viscoelastic Properties of Polymers: Relevance for Hot Embossing Lithography
Hoffmann, T. (2003) · Nanostructure Science and Technology · doi:10.1007/978-1-4419-9204-8_3 · Cited by 559
Cell–Material Interactions Revealed Via Material Techniques of Surface Patterning
Yao, X., Peng, R., & Ding, J. (2013) · Advanced Materials · doi:10.1002/adma.201301762 · Cited by 501
Engineering metallic nanostructures for plasmonics and nanophotonics
Lindquist, N. C., Nagpal, P., McPeak, K. M., Norris, D. J., & Oh, S.-H. (2012) · Reports on Progress in Physics · doi:10.1088/0034-4885/75/3/036501 · Cited by 497
Fabrication Approaches for Generating Complex Micro- and Nanopatterns on Polymeric Surfaces
del Campo, A., & Arzt, E. (2008) · Chemical Reviews · doi:10.1021/cr050018y · Cited by 484
Indentation across size scales and disciplines: Recent developments in experimentation and modeling
GOULDSTONE, A., CHOLLACOOP, N., DAO, M., LI, J., MINOR, A., & SHEN, Y. (2007) · Acta Materialia · doi:10.1016/j.actamat.2006.08.044 · Cited by 473
Printing meets lithography: Soft approaches to high-resolution patterning
Michel, B., Bernard, A., Bietsch, A., Delamarche, E., Geissler, M., Juncker, D., Kind, H., Renault, J.-P., Rothuizen, H., Schmid, H., et al. (2001) · IBM Journal of Research and Development · doi:10.1147/rd.455.0697 · Cited by 471
Self-organization of nanostructures in semiconductor heteroepitaxy
Teichert, C. (2002) · Physics Reports · doi:10.1016/s0370-1573(02)00009-1 · Cited by 462
Kasani, S., Curtin, K., & Wu, N. (2019) · Nanophotonics · doi:10.1515/nanoph-2019-0158 · Cited by 462
Recent Advances in Resonant Waveguide Gratings
Quaranta, G., Basset, G., Martin, O. J. F., & Gallinet, B. (2018) · Laser & Photonics Reviews · doi:10.1002/lpor.201800017 · Cited by 436
Soft lithographic methods for nano-fabrication
Zhao, X.-M., Xia, Y., & Whitesides, G. M. (1997) · Journal of Materials Chemistry · doi:10.1039/a700145b · Cited by 433
Lithography and Other Patterning Techniques for Future Electronics
Pease, R. F., & Chou, S. Y. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2007.911853 · Cited by 399
Self-citationEffects of artificial micro- and nano-structured surfaces on cell behaviour
Martínez, E., Engel, E., Planell, J. A., & Samitier, J. (2009) · Annals of Anatomy - Anatomischer Anzeiger · doi:10.1016/j.aanat.2008.05.006 · Cited by 394
Two-Photon Photopolymerization and 3D Lithographic Microfabrication
Sun, H.-B., & Kawata, S. (2006) · Advances in Polymer Science · doi:10.1007/b94405 · Cited by 380
Imprint lithography with sub-10 nm feature size and high throughput
Chou, S. Y., & Krauss, P. R. (1997) · Microelectronic Engineering · doi:10.1016/s0167-9317(96)00097-4 · Cited by 372
Self-citationFabrication of three‐dimensional micro‐structures: Microtransfer molding
Zhao, X., Xia, Y., & Whitesides, G. M. (1996) · Advanced Materials · doi:10.1002/adma.19960081016 · Cited by 361
A review of roll-to-roll nanoimprint lithography
Kooy, N., Mohamed, K., Pin, L. T., & Guan, O. S. (2014) · Nanoscale Research Letters · doi:10.1186/1556-276x-9-320 · Cited by 354
Sojoudi, H., Wang, M., Boscher, N. D., McKinley, G. H., & Gleason, K. K. (2016) · Soft Matter · doi:10.1039/c5sm02295a · Cited by 352
Liang, X., Jung, Y.-S., Wu, S., Ismach, A., Olynick, D. L., Cabrini, S., & Bokor, J. (2010) · Nano Letters · doi:10.1021/nl100750v · Cited by 344
Micro and nano-fabrication of biodegradable polymers for drug delivery
Lu, Y., & Chen, S. C. (2004) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2004.05.002 · Cited by 340
DNA confinement in nanochannels: physics and biological applications
Reisner, W., Pedersen, J. N., & Austin, R. H. (2012) · Reports on Progress in Physics · doi:10.1088/0034-4885/75/10/106601 · Cited by 336
Xia, D., Johnson, L. M., & López, G. P. (2012) · Advanced Materials · doi:10.1002/adma.201104618 · Cited by 327
UNCONVENTIONAL NANOFABRICATION
Gates, B. D., Xu, Q., Love, J. C., Wolfe, D. B., & Whitesides, G. M. (2004) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.34.052803.091100 · Cited by 324
Progress and prospects for ultrathin solar cells
Massiot, I., Cattoni, A., & Collin, S. (2020) · Nature Energy · doi:10.1038/s41560-020-00714-4 · Cited by 322
Roller nanoimprint lithography
Tan, H., Gilbertson, A., & Chou, S. Y. (1998) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.590438 · Cited by 317
Self-citationFukuda, K., & Someya, T. (2017) · Advanced Materials · doi:10.1002/adma.201602736 · Cited by 317
Whitehead, K. A., Colligon, J., & Verran, J. (2005) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2004.11.010 · Cited by 314
A single-molecule barcoding system using nanoslits for DNA analysis
Jo, K., Dhingra, D. M., Odijk, T., de Pablo, J. J., Graham, M. D., Runnheim, R., Forrest, D., & Schwartz, D. C. (2007) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0611151104 · Cited by 309
Replica molding using polymeric materials: A practical step toward nanomanufacturing
Xia, Y., McClelland, J. J., Gupta, R., Qin, D., Zhao, X., Sohn, L. L., Celotta, R. J., & Whitesides, G. M. (1997) · Advanced Materials · doi:10.1002/adma.19970090211 · Cited by 307
Moonen, P. F., Yakimets, I., & Huskens, J. (2012) · Advanced Materials · doi:10.1002/adma.201202949 · Cited by 304
Nanofabrication: Conventional and nonconventional methods
Chen, Y., & Pépin, A. (2001) · ELECTROPHORESIS · doi:10.1002/1522-2683(200101)22:2<187::aid-elps187>3.0.co;2-0 · Cited by 301
Self-folding polymeric containers for encapsulation and delivery of drugs
Fernandes, R., & Gracias, D. H. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.02.012 · Cited by 285
Surface nano-functionalization of biomaterials
Liu, X., Chu, P. K., & Ding, C. (2010) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2010.06.013 · Cited by 276
Xia, Y., & Whitesides, G. M. (1998) · Angewandte Chemie · doi:10.1002/(sici)1521-3757(19980302)110:5<568::aid-ange568>3.0.co;2-x · Cited by 267
Schvartzman, M., Palma, M., Sable, J., Abramson, J., Hu, X., Sheetz, M. P., & Wind, S. J. (2011) · Nano Letters · doi:10.1021/nl104378f · Cited by 263
A Rapid Thermal Nanoimprint Apparatus through Induction Heating of Nickel Mold
Fu, X., Chen, Q., Chen, X., Zhang, L., Yang, A., Cui, Y., Yuan, C., & Ge, H. (2019) · Micromachines · doi:10.3390/mi10050334 · Cited by 17
Wu, D., Xie, H., Dai, X., & Wang, R. (2014) · Measurement Science and Technology · doi:10.1088/0957-0233/25/2/025012 · Cited by 14
Biradar, M. R., Sagdic, G., Yuan, C., Marui, R., & Ober, C. K. (2026) · Chemical Reviews · doi:10.1021/acs.chemrev.5c01043 · Cited by 6
Metadata
- Authors
- Chou, S. Y., Krauss, P. R., & Renstrom, P. J.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 1995-11-20
- Volume
- 67
- Issue
- 21
- Pages
- 3114-3116
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2062074587
- Cited by
- 2,706
- References
- 0
- FWCI
- 11.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.