Paper-based analytical devices for clinical diagnosis: recent advances in the fabrication techniques and sensing mechanisms
Open accessThe DOI matches its Crossref record; 96 of the 96 references it cites were found in a registry or an index.
Abstract
INTRODUCTION: There is a significant interest in developing inexpensive portable biosensing platforms for various applications including disease diagnostics, environmental monitoring, food safety, and water testing at the point-of-care (POC) settings. Current diagnostic assays available in the developed world require sophisticated laboratory infrastructure and expensive reagents. Hence, they are not suitable for resource-constrained settings with limited financial resources, basic health infrastructure, and few trained technicians. Cellulose and flexible transparency paper-based analytical devices have demonstrated enormous potential for developing robust, inexpensive and portable devices for disease diagnostics. These devices offer promising solutions to disease management in resource-constrained settings where the vast majority of the population cannot afford expensive and highly sophisticated treatment options. Areas covered: In this review, the authors describe currently developed cellulose and flexible transparency paper-based microfluidic devices, device fabrication techniques, and sensing technologies that are integrated with these devices. The authors also discuss the limitations and challenges associated with these devices and their potential in clinical settings. Expert commentary: In recent years, cellulose and flexible transparency paper-based microfluidic devices have demonstrated the potential to become future healthcare options despite a few limitations such as low sensitivity and reproducibility.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Xia, Y., & Whitesides, G. M. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.153 · Cited by 4,611
Patterned Paper as a Platform for Inexpensive, Low‐Volume, Portable Bioassays
Martinez, A. W., Phillips, S. T., Butte, M. J., & Whitesides, G. M. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200603817 · Cited by 2,874 · cited 3×
“(Adapted from [27] with permission from John Wiley and Sons) Chromatography paper having patterns made by photoresist (a) device after absorbing Waterman red ink (5 mL).”
Diagnostics for the Developing World: Microfluidic Paper-Based Analytical Devices
Martinez, A. W., Phillips, S. T., Whitesides, G. M., & Carrilho, E. (2010) · Analytical Chemistry · doi:10.1021/ac9013989 · Cited by 2,674 · cited 2×
“printing [42,44], and plasma treatment [45], have been proposed for a cost-effective, simple, and portable product [25].”
Soft Lithography in Biology and Biochemistry
Whitesides, G. M., Ostuni, E., Takayama, S., Jiang, X., & Ingber, D. E. (2001) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.3.1.335 · Cited by 2,607 · cited 1×
“Various soft lithography techniques also were developed for the cost-effective fabrication of microfluidic devices such as maskless lithography and phase shift photolithography [42-45].”
Electrochemical Biosensors - Sensor Principles and Architectures
Grieshaber, D., MacKenzie, R., Vörös, J., & Reimhult, E. (2008) · Sensors · doi:10.3390/s80314000 · Cited by 2,329
Paper-based microfluidic point-of-care diagnostic devices
Yetisen, A. K., Akram, M. S., & Lowe, C. R. (2013) · Lab on a Chip · doi:10.1039/c3lc50169h · Cited by 1,943 · cited 5×
“Urinalysis test strips, such as Chemstrip , AimStick, and Multistix , use the colorimetric method [20].”
InfluentialUnderstanding Wax Printing: A Simple Micropatterning Process for Paper-Based Microfluidics
Carrilho, E., Martinez, A. W., & Whitesides, G. M. (2009) · Analytical Chemistry · doi:10.1021/ac901071p · Cited by 1,612 · cited 2×
“A simple and inexpensive process of wax printing was demonstrated utilizing hot plate and printer for the large-scale production of paper-based microfluidic devices [35].”
Kumar, A., & Whitesides, G. M. (1993) · Applied Physics Letters · doi:10.1063/1.110628 · Cited by 1,605 · cited 1×
“A more convenient way of fabricating gold patterns on silicon substrates has been reported [59].”
Patterning proteins and cells using soft lithography
Kane, R. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00165-9 · Cited by 1,490 · cited 1×
“Although photolithography is often used in making microfluidic devices, photolithography is still quite expensive and requires access to clean room facilities [40].”
Martinez, A. W., Phillips, S. T., Carrilho, E., Thomas, S. W., Sindi, H., & Whitesides, G. M. (2008) · Analytical Chemistry · doi:10.1021/ac800112r · Cited by 1,443 · cited 1×
“A camera enabled phone can be utilized with μPADs (Figure 1c,d), and collected data and images can then be transmitted using the wireless communications networks to centralized laboratories for analyses and obtaining results in real-time [15,16].”
Three-dimensional microfluidic devices fabricated in layered paper and tape
Martinez, A. W., Phillips, S. T., & Whitesides, G. M. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0810903105 · Cited by 1,246 · cited 2×
“Colorimetric analyses were used to measure the levels of glucose and protein in artificial urine [78].”
Recent Developments in Paper-Based Microfluidic Devices
Cate, D. M., Adkins, J. A., Mettakoonpitak, J., & Henry, C. S. (2015) · Analytical Chemistry · doi:10.1021/ac503968p · Cited by 1,236 · cited 1×
“which requires a specialized flexographic printer and can only print one reagent at a time [76].”
Electrochemical Detection for Paper-Based Microfluidics
Dungchai, W., Chailapakul, O., & Henry, C. S. (2009) · Analytical Chemistry · doi:10.1021/ac9007573 · Cited by 1,224 · cited 1×
“Electrochemical detection is suitable for μPADs due to its low cost, portability, high selectivity, sensitivity, low electrical power consumption, and minimal instrumentation [86].”
Diagnostics for the developing world
Mabey, D., Peeling, R. W., Ustianowski, A., & Perkins, M. D. (2004) · Nature Reviews Microbiology · doi:10.1038/nrmicro841 · Cited by 1,054 · cited 4×
“It is very important to keep these devices as simple as possible in terms of cost and operation as per guidelines of WHO.”
InfluentialAdvances in paper-based point-of-care diagnostics
Hu, J., Wang, S., Wang, L., Li, F., Pingguan-Murphy, B., Lu, T. J., & Xu, F. (2014) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2013.10.075 · Cited by 956 · cited 1×
“[111], and (iii) Reagents used in these μPADs, such as enzymes, antigens and antibodies, must withstand the harsh environmental conditions met during shipping and storage processes [3,112].”
A perspective on paper-based microfluidics: Current status and future trends
Li, X., Ballerini, D. R., & Shen, W. (2012) · Biomicrofluidics · doi:10.1063/1.3687398 · Cited by 813 · cited 2×
“Photolithography [46,47] High resolution of channel with sharp barriers, suitable for large-scale production Requires expensive instruments and reagents, involves complex steps, fragile while bending Inkjet printing [28,48] Able to rapidly fabricate devices on a large scale Requires a customized inkjet printer and an…”
Microfabrication meets microbiology
Weibel, D. B., DiLuzio, W. R., & Whitesides, G. M. (2007) · Nature Reviews Microbiology · doi:10.1038/nrmicro1616 · Cited by 788 · cited 1×
“Soft lithography uses elastomeric materials to fabricate pattern transfer elements and it can be used to pattern complex biochemicals based on embossing, molding, and printing [46].”
Inkjet-Printed Microfluidic Multianalyte Chemical Sensing Paper
Abe, K., Suzuki, K., & Citterio, D. (2008) · Analytical Chemistry · doi:10.1021/ac800604v · Cited by 766 · cited 1×
“Various μPAD device fabrication methods, such as photolithography [27,37], inkjet printing [33,38], polydimethylsiloxane (PDMS)”
FLASH: A rapid method for prototyping paper-based microfluidic devices
Martinez, A. W., Phillips, S. T., Wiley, B. J., Gupta, M., & Whitesides, G. M. (2008) · Lab on a Chip · doi:10.1039/b811135a · Cited by 695 · cited 1×
“Various μPAD device fabrication methods, such as photolithography [27,37], inkjet printing [33,38], polydimethylsiloxane (PDMS)”
Recent Advances in Paper-Based Sensors
Liana, D. D., Raguse, B., Gooding, J. J., & Chow, E. (2012) · Sensors · doi:10.3390/s120911505 · Cited by 660
Low-Cost Printing of Poly(dimethylsiloxane) Barriers To Define Microchannels in Paper
Bruzewicz, D. A., Reches, M., & Whitesides, G. M. (2008) · Analytical Chemistry · doi:10.1021/ac702605a · Cited by 616 · cited 5×
“plotting [39], wax printing [40–42], wax dipping [43], wax screen”
InfluentialElectrogenerated Chemiluminescence Detection in Paper-Based Microfluidic Sensors
Delaney, J. L., Hogan, C. F., Tian, J., & Shen, W. (2011) · Analytical Chemistry · doi:10.1021/ac102392t · Cited by 592 · cited 1×
“ECL has been integrated with paper-based microfluidics devices [86].”
Bioactive paper provides a low-cost platform for diagnostics
Pelton, R. (2009) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2009.05.005 · Cited by 562 · cited 1×
“patible with various biological samples [26].”
Wang, S., Ge, L., Song, X., Yu, J., Ge, S., Huang, J., & Zeng, F. (2011) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2011.10.019 · Cited by 480 · cited 6×
“A paper-based device has been proposed to combine the advantages of μPADs and CL-ELISA [36].”
InfluentialNgom, B., Guo, Y., Wang, X., & Bi, D. (2010) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-010-3661-4 · Cited by 386
Flexographically Printed Fluidic Structures in Paper
Olkkonen, J., Lehtinen, K., & Erho, T. (2010) · Analytical Chemistry · doi:10.1021/ac1027066 · Cited by 369 · cited 2×
“Flexographic printing is another important technique to fabricate μPADs on a large scale in a roll-to-roll process (Figure 8(b)) [57].”
Use of multiple colorimetric indicators for paper-based microfluidic devices
Dungchai, W., Chailapakul, O., & Henry, C. S. (2010) · Analytica Chimica Acta · doi:10.1016/j.aca.2010.06.019 · Cited by 364 · cited 1×
“used to detect a corresponding analyte but a more accurate method has been demonstrated to measure the concentration of a single analyte using multiple indicators [80].”
Nano/Microfluidics for diagnosis of infectious diseases in developing countries
Lee, W. G., Kim, Y.-G., Chung, B. G., Demirci, U., & Khademhosseini, A. (2010) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2009.11.016 · Cited by 357
Self-citationEngineering cancer microenvironments for in vitro 3-D tumor models
Asghar, W., El Assal, R., Shafiee, H., Pitteri, S., Paulmurugan, R., & Demirci, U. (2015) · Materials Today · doi:10.1016/j.mattod.2015.05.002 · Cited by 316 · cited 1×
“Microfluidics have truly changed the modern era of diagnostics, whether it is for biomedical research [8,11,90-100], fertility [9,10,12,101], DNA analysis [102-107], environmental monitoring [108] or food safety [109].”
Self-citationSongjaroen, T., Dungchai, W., Chailapakul, O., & Laiwattanapaisal, W. (2011) · Talanta · doi:10.1016/j.talanta.2011.08.024 · Cited by 312 · cited 6×
“Laser printing [54] Simple and inexpensive method to fabricate microfluidic devices Requires laser printer, graphics software, laminator, and paper driller Wax printing [19] Fast and simple fabrication technique, suitable for mass production Low resolution, uses expensive wax printer, not resistant to high temperature…”
InfluentialPires, N., Dong, T., Hanke, U., & Hoivik, N. (2014) · Sensors · doi:10.3390/s140815458 · Cited by 307 · cited 1×
“cules and fluorescent dyes known as fluorophores [96,97].”
Small-molecule fluorophores and fluorescent probes for bioimaging
Terai, T., & Nagano, T. (2013) · Pflügers Archiv - European Journal of Physiology · doi:10.1007/s00424-013-1234-z · Cited by 301 · cited 1×
“cules and fluorescent dyes known as fluorophores [96,97].”
Paper-based analytical devices for environmental analysis
Meredith, N. A., Quinn, C., Cate, D. M., Reilly, T. H., Volckens, J., & Henry, C. S. (2016) · The Analyst · doi:10.1039/c5an02572a · Cited by 299 · cited 1×
“These devices are also well-suited for the food industry, security and environmental monitoring applications [13,14].”
Universal mobile electrochemical detector designed for use in resource-limited applications
Nemiroski, A., Christodouleas, D. C., Hennek, J. W., Kumar, A. A., Maxwell, E. J., Fernández-Abedul, M. T., & Whitesides, G. M. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1405679111 · Cited by 285 · cited 1×
“electrochemical detection was achieved, using a mobile phone for resource-constrained settings [79].”
Wang, S., Zhao, X., Khimji, I., Akbas, R., Qiu, W., Edwards, D., Cramer, D. W., Ye, B., & Demirci, U. (2011) · Lab on a Chip · doi:10.1039/c1lc20479c · Cited by 254 · cited 1×
“Smart phone and lensless imaging-based disease detection and quantification is another area of immense interest [16,114,115].”
Self-citationPaper-based chemical and biological sensors: Engineering aspects
Ahmed, S., Bui, M.-P. N., & Abbas, A. (2016) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2015.09.038 · Cited by 249 · cited 2×
“Photolithography [46,47] High resolution of channel with sharp barriers, suitable for large-scale production Requires expensive instruments and reagents, involves complex steps, fragile while bending Inkjet printing [28,48] Able to rapidly fabricate devices on a large scale Requires a customized inkjet printer and an…”
de Tarso Garcia, P., Garcia Cardoso, T. M., Garcia, C. D., Carrilho, E., & Tomazelli Coltro, W. K. (2014) · RSC Adv. · doi:10.1039/c4ra07112c · Cited by 241 · cited 2×
“(b) (Adapted from [74] permission of The Royal Society of Chemistry) Schematic illustration of microfluidic device printing method based on stamping: (i) placement of paraffined paper (p-paper) on native paper (n-paper) (ii) preheated metal stamp brought in contact with layered papers.”
Smartphone quantifies Salmonella from paper microfluidics
Park, T. S., Li, W., McCracken, K. E., & Yoon, J.-Y. (2013) · Lab on a Chip · doi:10.1039/c3lc50976a · Cited by 233 · cited 1×
“Paper is a nonhomogenous medium of cellulose fibers making the detection of complex analytes challenging [126].”
Electrochemical detection of glucose from whole blood using paper-based microfluidic devices
Noiphung, J., Songjaroen, T., Dungchai, W., Henry, C. S., Chailapakul, O., & Laiwattanapaisal, W. (2013) · Analytica Chimica Acta · doi:10.1016/j.aca.2013.06.021 · Cited by 227 · cited 1×
“using electrochemical detection for the quantification of glucose from the whole blood samples [90].”
Rodriguez, N. M., Wong, W. S., Liu, L., Dewar, R., & Klapperich, C. M. (2016) · Lab on a Chip · doi:10.1039/c5lc01392e · Cited by 225 · cited 1×
“Recently, a μPAD was utilized for colorimetric detection of human papillomavirus (HPV)16 DNA from cervical sample in less than an hour [79].”
Kong, F.-Y., Gu, S.-X., Li, W.-W., Chen, T.-T., Xu, Q., & Wang, W. (2014) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2013.12.067 · Cited by 217
López-Marzo, A. M., & Merkoçi, A. (2016) · Lab on a Chip · doi:10.1039/c6lc00737f · Cited by 215 · cited 1×
“These devices are also well-suited for the food industry, security and environmental monitoring applications [13,14].”
Portable Microfluidic Integrated Plasmonic Platform for Pathogen Detection
Tokel, O., Yildiz, U. H., Inci, F., Durmus, N. G., Ekiz, O. O., Turker, B., Cetin, C., Rao, S., Sridhar, K., Natarajan, N., et al. (2015) · Scientific Reports · doi:10.1038/srep09152 · Cited by 210 · cited 2×
“Laser Cutting The CO2 laser cutter has been widely used to cut the paper, PMMA, and double sided adhesive (DSA) to fabricate microfluidic devices [2,3,16,47-51].”
Self-citationFlexible Substrate-Based Devices for Point-of-Care Diagnostics
Wang, S., Chinnasamy, T., Lifson, M. A., Inci, F., & Demirci, U. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.05.009 · Cited by 209 · cited 1×
“The use of flexible transparent materials along with colorimetric detection process can significantly enhance the sensitivity for POC assays [72] .”
Self-citationGabriel, E. F. M., Garcia, P. T., Cardoso, T. M. G., Lopes, F. M., Martins, F. T., & Coltro, W. K. T. (2016) · The Analyst · doi:10.1039/c6an00430j · Cited by 204 · cited 1×
“Recently, chitosan has been used to modify the surface of μPADs [75].”
Yu, J., Wang, S., Ge, L., & Ge, S. (2011) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2010.12.044 · Cited by 203 · cited 1×
“The generated peroxide and rhodanine derivative reacted in acidic medium to yield CL [92].”
Wu, Y., Xue, P., Hui, K. M., & Kang, Y. (2014) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2013.08.039 · Cited by 200 · cited 6×
“(b) (Adapted from [24] with permission from Elsevier) Pictorial illustration of the electrochemical immunoassay procedure using CEA.”
MethodInfluentialProgress in patterned paper sizing for fabrication of paper-based microfluidic sensors
Li, X., Tian, J., & Shen, W. (2010) · Cellulose · doi:10.1007/s10570-010-9401-2 · Cited by 187 · cited 1×
“Examples include the detection of uric acid and nitrate in the saliva [29].”
Selection of Functional Human Sperm with Higher DNA Integrity and Fewer Reactive Oxygen Species
Asghar, W., Velasco, V., Kingsley, J. L., Shoukat, M. S., Shafiee, H., Anchan, R. M., Mutter, G. L., Tüzel, E., & Demirci, U. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400058 · Cited by 175 · cited 1×
“[9,10,12,110], DNA analysis [111–116], environmental monitoring [116], or food safety [118].”
Self-citationModification of microfluidic paper-based devices with silica nanoparticles
Evans, E., Moreira Gabriel, E. F., Benavidez, T. E., Tomazelli Coltro, W. K., & Garcia, C. D. (2014) · The Analyst · doi:10.1039/c4an01147c · Cited by 173 · cited 1×
“In an attempt to significantly improve the color intensity and uniformity, researchers have modified the surface of μPAD with silica nanoparticles [73].”
Lucio do Lago, C., Torres da Silva, H. D., Neves, C. A., Alves Brito-Neto, J. G., & Fracassi da Silva, J. A. (2003) · Analytical Chemistry · doi:10.1021/ac034437b · Cited by 172 · cited 2×
“Laser printing [54] Simple and inexpensive method to fabricate microfluidic devices Requires laser printer, graphics software, laminator, and paper driller Wax printing [19] Fast and simple fabrication technique, suitable for mass production Low resolution, uses expensive wax printer, not resistant to high temperature…”
Applications of Microfluidic Devices in Food Engineering
Skurtys, O., & Aguilera, J. M. (2007) · Food Biophysics · doi:10.1007/s11483-007-9043-6 · Cited by 172 · cited 1×
“[9,10,12,110], DNA analysis [111–116], environmental monitoring [116], or food safety [118].”
Paper and Flexible Substrates as Materials for Biosensing Platforms to Detect Multiple Biotargets
Shafiee, H., Asghar, W., Inci, F., Yuksekkaya, M., Jahangir, M., Zhang, M. H., Durmus, N. G., Gurkan, U. A., Kuritzkes, D. R., & Demirci, U. (2015) · Scientific Reports · doi:10.1038/srep08719 · Cited by 169 · cited 5×
“and graphene inks are widely used for the screen printing of electrodes and connecting wires [16].”
InfluentialSelf-citationSafavieh, M., Kanakasabapathy, M. K., Tarlan, F., Ahmed, M. U., Zourob, M., Asghar, W., & Shafiee, H. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00449 · Cited by 161 · cited 2×
“Laser Cutting The CO2 laser cutter has been widely used to cut the paper, PMMA, and double sided adhesive (DSA) to fabricate microfluidic devices [2,3,16,47-51].”
Self-citationMicrofluidic devices for environmental monitoring
Marle, L., & Greenway, G. M. (2005) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2005.08.003 · Cited by 160 · cited 1×
“Microfluidics have truly changed the modern era of diagnostics, whether it is for biomedical research [8,11,90-100], fertility [9,10,12,101], DNA analysis [102-107], environmental monitoring [108] or food safety [109].”
Sperm processing for advanced reproductive technologies: Where are we today?
Rappa, K., Rodriguez, H. F., Hakkarainen, G. C., Anchan, R. M., Mutter, G. L., & Asghar, W. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.01.007 · Cited by 158 · cited 1×
“[9,10,12,110], DNA analysis [111–116], environmental monitoring [116], or food safety [118].”
Self-citationNanostructured substrates for isolation of circulating tumor cells
Wang, L., Asghar, W., Demirci, U., & Wan, Y. (2013) · Nano Today · doi:10.1016/j.nantod.2013.07.001 · Cited by 153 · cited 1×
“Microfluidics have truly changed the modern era of diagnostics, whether it is for biomedical research [8,11,90-100], fertility [9,10,12,101], DNA analysis [102-107], environmental monitoring [108] or food safety [109].”
Self-citationSimple Specific Test for Urine Glucose
Free, A. H., Adams, E. C., Kercher, M. L., Free, H. M., & Cook, M. H. (1957) · Clinical Chemistry · doi:10.1093/clinchem/3.3.163 · Cited by 152 · cited 1×
“The paper-based dipstick assays are well-known; used to detect glucose in urine [18].”
Wang, S., Lifson, M. A., İnci, F., Liang, L.-G., Sheng, Y.-F., & Demirci, U. (2016) · Expert Review of Molecular Diagnostics · doi:10.1586/14737159.2016.1142877 · Cited by 149 · cited 2×
“μPADs have emerged as a cost-effective solution for disease diagnostics in resource-constrained settings lacking basic health-care facilities [130].”
Self-citationSobieranski, A. C., İnci, F., Tekin, H. C., Yüksekkaya, M. E., Comunello, E., Cobra, D. T., von Wangenheim, A., & Demirci, U. (2015) · Light Science & Applications · doi:10.1038/lsa.2015.119 · Cited by 148 · cited 1×
“Smart phone and lensless imaging-based disease detection and quantification is another area of immense interest [16,114,115].”
Self-citationPaper Microfluidics Goes Digital
Fobel, R., Kirby, A. E., Ng, A. H. C., Farnood, R., & Wheeler, A. R. (2014) · Advanced Materials · doi:10.1002/adma.201305168 · Cited by 140 · cited 1×
“drops on an array of electrodes in two dimensions using electric fields [122].”
BackgroundFlexible ethanol sensors on glossy paper substrates operating at room temperature
Arena, A., Donato, N., Saitta, G., Bonavita, A., Rizzo, G., & Neri, G. (2009) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2009.12.053 · Cited by 130 · cited 1×
“have used glossy paper for the fabrication of flexible ethanol sensors at the room temperature [36] Figure 3.”
Paper-based planar reaction arrays for printed diagnostics
Määttänen, A., Fors, D., Wang, S., Valtakari, D., Ihalainen, P., & Peltonen, J. P. K. (2011) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2011.09.086 · Cited by 130 · cited 1×
“Paperbased reaction arrays were fabricated using both flexographic and inkjet printing [75].”
Wang, X., Rodrigues, T., Jiang, S., Cheng, X., & Kellner, A. W. A. (2014) · Scientific Reports · doi:10.1038/srep06329 · Cited by 126
Manipulating biological agents and cells in micro-scale volumes for applications in medicine
Tasoglu, S., Gurkan, U. A., Wang, S., & Demirci, U. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60042d · Cited by 109 · cited 1×
“Microfluidics have truly changed the modern era of diagnostics, whether it is for biomedical research [8,11,90-100], fertility [9,10,12,101], DNA analysis [102-107], environmental monitoring [108] or food safety [109].”
Self-citationAcute On‐Chip HIV Detection Through Label‐Free Electrical Sensing of Viral Nano‐Lysate
Shafiee, H., Jahangir, M., İnci, F., Wang, S., Willenbrecht, R. B. M., Giguel, F. F., Tsibris, A. M. N., Kuritzkes, D. R., & Demirci, U. (2013) · Small · doi:10.1002/smll.201202195 · Cited by 108 · cited 1×
“Laser Cutting The CO2 laser cutter has been widely used to cut the paper, PMMA, and double sided adhesive (DSA) to fabricate microfluidic devices [2,3,16,47-51].”
Self-citationMicrofluidic devices for biomedical applications
Li, X., & Zhou, Y. (2013) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857097040 · Cited by 106 · cited 4×
“Photolithography [46,47] High resolution of channel with sharp barriers, suitable for large-scale production Requires expensive instruments and reagents, involves complex steps, fragile while bending Inkjet printing [28,48] Able to rapidly fabricate devices on a large scale Requires a customized inkjet printer and an…”
BackgroundMethodInfluentialPreserving human cells for regenerative, reproductive, and transfusion medicine
Asghar, W., El Assal, R., Shafiee, H., Anchan, R. M., & Demirci, U. (2014) · Biotechnology Journal · doi:10.1002/biot.201300074 · Cited by 105 · cited 1×
“[9,10,12,110], DNA analysis [111–116], environmental monitoring [116], or food safety [118].”
Self-citationVelocity Effect on Aptamer-Based Circulating Tumor Cell Isolation in Microfluidic Devices
Wan, Y., Tan, J., Asghar, W., Kim, Y. T., Liu, Y., & Iqbal, S. M. (2011) · The Journal of Physical Chemistry B · doi:10.1021/jp205511m · Cited by 101 · cited 1×
“Microfluidics have truly changed the modern era of diagnostics, whether it is for biomedical research [8,11,90-100], fertility [9,10,12,101], DNA analysis [102-107], environmental monitoring [108] or food safety [109].”
Self-citationFigueredo, F., Garcia, P. D. T., Cortón, E., & Coltro, W. K. T. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10027 · Cited by 99 · cited 1×
“phene oxide were utilized to modify the surface of μPADs [84].”
Micro-a-fluidics ELISA for Rapid CD4 Cell Count at the Point-of-Care
Wang, S., Taşoğlu, S., Chen, P., Chen, M., Akbas, R., Wach, S., Özdemir, C. I., Gurkan, U. A., Giguel, F. F., Kuritzkes, D. R., et al. (2014) · Scientific Reports · doi:10.1038/srep03796 · Cited by 97 · cited 2×
“In one other example, micro-a-fluidics ELISA (m-ELISA) platform was developed using mineral oil to make valves [50].”
Self-citationLevitational Image Cytometry with Temporal Resolution
Taşoğlu, S., Khoory, J. A., Tekin, H. C., Thomas, C., Karnoub, A. E., Ghiran, I. C., & Demirci, U. (2015) · Advanced Materials · doi:10.1002/adma.201405660 · Cited by 91 · cited 1×
“Laser Cutting The CO2 laser cutter has been widely used to cut the paper, PMMA, and double sided adhesive (DSA) to fabricate microfluidic devices [2,3,16,47-51].”
Self-citationSoft Lithographic Approaches to Nanofabrication
Lipomi, D. J., Martínez, R. V., Cademartiri, L., & Whitesides, G. M. (2012) · Elsevier eBooks · doi:10.1016/b978-0-444-53349-4.00180-1 · Cited by 88 · cited 1×
“Various soft lithography techniques also were developed for the cost-effective fabrication of microfluidic devices such as maskless lithography and phase shift photolithography [42-45].”
Dynamic Solid Phase DNA Extraction and PCR Amplification in Polyester-Toner Based Microchip
Duarte, G. R. M., Price, C. W., Augustine, B. H., Carrilho, E., & Landers, J. P. (2011) · Analytical Chemistry · doi:10.1021/ac200292m · Cited by 82 · cited 1×
“A technique was presented for the fabrication of polyester-toner microfluidic device [55].”
Electrical fingerprinting, 3D profiling and detection of tumor cells with solid-state micropores
Asghar, W., Wan, Y., Ilyas, A., Bachoo, R. M., Kim, Y. T., & Iqbal, S. M. (2012) · Lab on a Chip · doi:10.1039/c2lc21012f · Cited by 78 · cited 1×
“Microfluidics have truly changed the modern era of diagnostics, whether it is for biomedical research [8,11,90-100], fertility [9,10,12,101], DNA analysis [102-107], environmental monitoring [108] or food safety [109].”
Self-citationLow-Cost Microdevices for Point-of-Care Testing
Chin, C. D., Chin, S. Y., Laksanasopin, T., & Sia, S. K. (2012) · Biological and medical physics series · doi:10.1007/978-3-642-29268-2_1 · Cited by 62 · cited 1×
“The field of microfluidics has witnessed great developments during the last decade and these advancements have played a key role to design various POC devices for resource-constrained settings [6-12].”
Electrical detection of cancer biomarker using aptamers with nanogap break-junctions
Ilyas, A., Asghar, W., Allen, P. B., Duhon, H., Ellington, A. D., & Iqbal, S. M. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/27/275502 · Cited by 60 · cited 1×
“Microfluidics have truly changed the modern era of diagnostics, whether it is for biomedical research [8,11,90-100], fertility [9,10,12,101], DNA analysis [102-107], environmental monitoring [108] or food safety [109].”
Self-citationToxicology Study of Single-walled Carbon Nanotubes and Reduced Graphene Oxide in Human Sperm
Asghar, W., Shafiee, H., Velasco, V., Sah, V. R., Guo, S., Assal, R. E., İnci, F., Rajagopalan, A., Jahangir, M., Anchan, R. M., et al. (2016) · Scientific Reports · doi:10.1038/srep30270 · Cited by 58 · cited 1×
“Microfluidics have truly changed the modern era of diagnostics, whether it is for biomedical research [8,11,90-100], fertility [9,10,12,101], DNA analysis [102-107], environmental monitoring [108] or food safety [109].”
Self-citationAdvances in Candida detection platforms for clinical and point-of-care applications
Safavieh, M., Coarsey, C., Esiobu, N., Memic, A., Vyas, J. M., Shafiee, H., & Asghar, W. (2017) · Critical Reviews in Biotechnology · doi:10.3109/07388551.2016.1167667 · Cited by 57 · cited 2×
“The field of microfluidics has witnessed great developments during the last decade and these advancements have played a key role to design various POC devices for resource-constrained settings [6-12].”
Self-citationAsghar, W., Yüksekkaya, M. E., Shafiee, H., Zhang, M. Z., Ozen, M. O., İnci, F., Kocakulak, M., & Demirci, U. (2016) · Scientific Reports · doi:10.1038/srep21163 · Cited by 50 · cited 3×
“(a) (Adapted from [3] under the Creative Commons Attribution 4.”
Self-citationMicrochip-based ultrafast serodiagnostic assay for tuberculosis
Mani, V., Paleja, B. S., Larbi, K., Kumar, P., Tay, J. A., Siew, J. Y., İnci, F., Wang, S., Chee, C. B. E., Wang, Y. T., et al. (2016) · Scientific Reports · doi:10.1038/srep35845 · Cited by 35 · cited 1×
“a similar kind of device was proposed for the detection of tuberculosis [66].”
Self-citationShafiee, H., Kanakasabapathy, M. K., Juillard, F., Keser, M., Sadasivam, M., Yüksekkaya, M. E., Hanhauser, E., Henrich, T. J., Kuritzkes, D. R., Kaye, K. M., et al. (2015) · Scientific Reports · doi:10.1038/srep09919 · Cited by 29 · cited 1×
“Laser Cutting The CO2 laser cutter has been widely used to cut the paper, PMMA, and double sided adhesive (DSA) to fabricate microfluidic devices [2,3,16,47-51].”
Self-citationParallel recognition of cancer cells using an addressable array of solid-state micropores
Ilyas, A., Asghar, W., Kim, Y. T., & Iqbal, S. M. (2014) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2014.06.048 · Cited by 26 · cited 1×
“Microfluidics have truly changed the modern era of diagnostics, whether it is for biomedical research [8,11,90-100], fertility [9,10,12,101], DNA analysis [102-107], environmental monitoring [108] or food safety [109].”
Self-citationIlyas, A., Asghar, W., Ahmed, S., Lotan, Y., Hsieh, J., Kim, Y. T., & Iqbal, S. M. (2014) · Analytical Methods · doi:10.1039/c4ay00781f · Cited by 24 · cited 2×
“The field of microfluidics has witnessed great developments during the last decade and these advancements have played a key role to design various POC devices for resource-constrained settings [6-12].”
Self-citationCharacterization of DNA-Nanopore Interactions by Molecular Dynamics
Ramachandran, A., Liu, Y., Asghar, W., & Iqbal, S. M. (2009) · American Journal of Biomedical Sciences · doi:10.5099/aj090400344 · Cited by 21 · cited 1×
“Microfluidics have truly changed the modern era of diagnostics, whether it is for biomedical research [8,11,90-100], fertility [9,10,12,101], DNA analysis [102-107], environmental monitoring [108] or food safety [109].”
Self-citationDuVall, J. A., Roux, D. L., Tsuei, A.-C., Thompson, B. L., Birch, C., Li, J., Nelson, D. A., Mills, D. L., Ewing, M. M., McLaren, R. S., et al. (2016) · Analytical Methods · doi:10.1039/c6ay01984f · Cited by 20 · cited 10×
“The proposed device was utilized for the dynamic solid-phase extraction of DNA.”
InfluentialTechnology-driven diagnostics: From smart doctor to smartphone
Li, M., & Diamandis, E. P. (2016) · Critical Reviews in Clinical Laboratory Sciences · doi:10.3109/10408363.2016.1149689 · Cited by 20 · cited 1×
“offer a bright future for technology-driven disease diagnostics [128].”
Asghar, W., Ramachandran, P. P., Adewumi, A., Noor, M. R., & Iqbal, S. M. (2010) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4001664 · Cited by 19 · cited 1×
“Photolithography [46,47] High resolution of channel with sharp barriers, suitable for large-scale production Requires expensive instruments and reagents, involves complex steps, fragile while bending Inkjet printing [28,48] Able to rapidly fabricate devices on a large scale Requires a customized inkjet printer and an…”
Self-citationIn Vitro Three-Dimensional Cancer Culture Models
Asghar, W., Shafiee, H., Chen, P., Taşoğlu, S., Güven, S., Gurkan, U. A., & Demirci, U. (2013) · Springer eBooks · doi:10.1007/978-1-4614-7876-8_24 · Cited by 18 · cited 1×
“Microfluidics have truly changed the modern era of diagnostics, whether it is for biomedical research [8,11,90-100], fertility [9,10,12,101], DNA analysis [102-107], environmental monitoring [108] or food safety [109].”
Self-citationNext-Generation Microfluidic Point-of-Care Diagnostics
Ng, A. H. C., & Wheeler, A. R. (2015) · Clinical Chemistry · doi:10.1373/clinchem.2015.240226 · Cited by 18 · cited 1×
“The complexity of the paper-based microfluidic devices can be substantially reduced when various tasks like detection, data processing and power are handled by smart phones [120].”
Novak, M. T., Kotanen, C. N., Carrara, S., Guiseppi‐Elie, A., & Moussy, F. G. (2013) · Health and Technology · doi:10.1007/s12553-013-0060-9 · Cited by 15 · cited 1×
“The field of microfluidics has witnessed great developments during the last decade and these advancements have played a key role to design various POC devices for resource-constrained settings [6-12].”
Yetisen, A. K. (2014) · Springer theses · doi:10.1007/978-3-319-13584-7_1 · Cited by 14
Cell Elasticity-based Microfluidic Label-free Isolation of Metastatic Tumor Cells
Islam, M. (2014) · Journal of Advances in Medicine and Medical Research · doi:10.9734/bjmmr/2014/7392 · Cited by 11 · cited 1×
“Microfluidics have truly changed the modern era of diagnostics, whether it is for biomedical research [8,11,90-100], fertility [9,10,12,101], DNA analysis [102-107], environmental monitoring [108] or food safety [109].”
Porous Organic Nanolayers for Coating of Solid-state Devices
Vidyala, S. D., Asghar, W., & Iqbal, S. M. (2011) · Journal of Nanobiotechnology · doi:10.1186/1477-3155-9-18 · Cited by 10
Self-citationCharacterization of fluid flow in paper-based microfluidic devices
Walji, N. (2015) · e-scholar@UOIT (University of Ontario Institute of Technology) · Cited by 4
Applications of Electrochemiluminescence
Parveen, S., Aslam, M. S., Hu, L., & Xu, G. (2013) · Springer briefs in molecular science · doi:10.1007/978-3-642-39555-0_7 · Cited by 3 · cited 1×
“More than 150 different immunoassays are available on the market for detecting tumor markers and treating thyroid disease and various infectious diseases [94].”
Cited by
McConnell, E. M., Cozma, I., Mou, Q., Brennan, J. D., Lu, Y., & Li, Y. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00240f · Cited by 477
Nanomaterial-based devices for point-of-care diagnostic applications
Quesada-González, D., & Merkoçi, A. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00837f · Cited by 393
Paper-Based Sensors: Emerging Themes and Applications
Singh, A. T., Lantigua, D., Meka, A., Taing, S., Pandher, M., & Camci-Unal, G. (2018) · Sensors · doi:10.3390/s18092838 · Cited by 284
Metadata
- Authors
- Sher, M., Zhuang, R., Demirci, U., & Asghar, W.
- Venue
- Expert Review of Molecular Diagnostics
- Publisher
- Informa UK Limited
- Published
- 2017-03-17
- Volume
- 17
- Issue
- 4
- Pages
- 351-366
- ISSN
- 1473-7159 (ISSN-L)
- 1744-8352
- OpenAlex
- W2572533737
- Cited by
- 245
- References
- 96
- FWCI
- 14.32
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.