The DOI matches its Crossref record; 126 of the 126 references it cites were found in a registry or an index.
Effects of porosity on the mechanical properties of additively manufactured components: a critical review
Open accessAbstract
In the present review, the effect of porosity on the mechanical properties of the fabricated parts, which are additively manufactured by powder bed fusion and filament extrusion-based technologies, are discussed in detail. Usually, additive manufacturing (AM) processes based on these techniques produce the components with a significant amount of pores. The porosity in these parts typically takes two forms: pores with irregular shapes (called keyholes) and uniform (spherical) pores. These pores are present at different locations, such as surface, sub-surface, interior bulk material, between the deposited layers and at filler/matrix interface, which critically affect the corrosion resistance, fatigue strength, stiffness, mechanical strength, and fracture toughness properties, respectively. Therefore, it is essential to study and understand the influence of pores on the mechanical properties of AM fabricated parts. The technologies of AM can be employed in the manufacturing of components with the desired porous structure through the topology optimization process of scaffolds and lattices to improve their toughness under a specific load. The undesirable effect of pores can be eliminated by using defects-free raw materials, optimizing the processing parameters, and implementing suitable post-processing treatment. The current review grants a more comprehensive understanding of the effect of porous defects on mechanical performance and provides a mechanistic basis for reliable applications of additively manufactured components.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Guidelines for the use and interpretation of adsorption isotherm models: a review
Al-Ghouti, M. A., & Da'ana, D. A. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122383 · Cited by 3,535
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Mechanical characterization of 3D-printed polymers
Dizon, J. R. C., Espera, A. H., Chen, Q., & Advincula, R. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.002 · Cited by 1,340
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Shamsaei, N., Yadollahi, A., Bian, L., & Thompson, S. M. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.002 · Cited by 1,108
Al-Ketan, O., Rowshan, R., & Abu Al-Rub, R. K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.006 · Cited by 941
An investigation into 3D printing of fibre reinforced thermoplastic composites
Blok, L. G., Longana, M. L., Yu, H., & Woods, B. K. S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.039 · Cited by 866
A review of mechanical properties of additively manufactured Inconel 718
Hosseini, E., & Popovich, V. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100877 · Cited by 856
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
Dickson, A. N., Barry, J. N., McDonnell, K. A., & Dowling, D. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.06.004 · Cited by 792
Fused filament fabrication of fiber-reinforced polymers: A review
Brenken, B., Barocio, E., Favaloro, A., Kunc, V., & Pipes, R. B. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.01.002 · Cited by 737
Plocher, J., & Panesar, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108164 · Cited by 669
Fayazfar, H., Salarian, M., Rogalsky, A., Sarker, D., Russo, P., Paserin, V., & Toyserkani, E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.018 · Cited by 665
Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
Heidari-Rarani, M., Rafiee-Afarani, M., & Zahedi, A. M. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107147 · Cited by 615
Additive construction: State-of-the-art, challenges and opportunities
Labonnote, N., Rønnquist, A., Manum, B., & Rüther, P. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.08.026 · Cited by 607
Goh, G. D., Dikshit, V., Nagalingam, A. P., Goh, G. L., Agarwala, S., Sing, S. L., Wei, J., & Yeong, W. Y. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.021 · Cited by 604
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
Metal additive manufacturing in the commercial aviation industry: A review
Gisario, A., Kazarian, M., Martina, F., & Mehrpouya, M. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.08.005 · Cited by 574
Daminabo, S. C., Goel, S., Grammatikos, S. A., Nezhad, H. Y., & Thakur, V. K. (2020) · Materials Today Chemistry · doi:10.1016/j.mtchem.2020.100248 · Cited by 567
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Chacón, J. M., Caminero, M. Á., López, P. J. N., Plaza, E. G., García-Moreno, I., & Reverte, J. M. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107688 · Cited by 512
Murr, L. E., Martinez, E., Amato, K. N., Gaytan, S. M., Hernandez, J., Ramirez, D. A., Shindo, P. W., Medina, F., & Wicker, R. B. (2012) · Journal of Materials Research and Technology · doi:10.1016/s2238-7854(12)70009-1 · Cited by 470
An overview of functionally graded additive manufacturing
Loh, G. H., Pei, E., Harrison, D., & Monzón, M. D. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.023 · Cited by 459
Kadkhodapour, J., Montazerian, H., Darabi, A., Anaraki, A. P., Ahmadi, S. M., ZADPOOR, A. A., & Schmauder, S. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.06.012 · Cited by 413
The influence of additive manufacturing processing parameters on surface roughness and fatigue life
Gockel, J., Sheridan, L., Koerper, B., & Whip, B. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.03.025 · Cited by 405
Current status and future directions of fused filament fabrication
Singh, S., Singh, G., Prakash, C., & Ramakrishna, S. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.049 · Cited by 385
Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V
Pegues, J., Roach, M., Scott Williamson, R., & Shamsaei, N. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.07.013 · Cited by 378
Sola, A., & Nouri, A. (2019) · Journal of Advanced Manufacturing and Processing · doi:10.1002/amp2.10021 · Cited by 378
Galarraga, H., Lados, D. A., Dehoff, R., Kirka, M. M., & Nandwana, P. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.02.003 · Cited by 334
Cunningham, R., Narra, S. P., Montgomery, C., Beuth, J., & Rollett, A. D. (2017) · JOM · doi:10.1007/s11837-016-2234-1 · Cited by 334
Bonatti, C., & Mohr, D. (2019) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.08.022 · Cited by 330
Uddin, S. Z., Murr, L. E., Terrazas, C. A., Morton, P. A., Roberson, D. A., & Wicker, R. B. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.05.047 · Cited by 310
Additively manufactured biodegradable porous iron
Li, Y., Jahr, H., Lietaert, K., Pavanram, P., Yilmaz, A., Fockaert, L. I., Leeflang, M. A., Pouran, B., Gonzalez-Garcia, Y., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.07.011 · Cited by 299
Yuan, S., Shen, F., Bai, J., Chua, C. K., Wei, J., & Zhou, K. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.098 · Cited by 295
In-Process monitoring of porosity during laser additive manufacturing process
Zhang, B., Liu, S., & Shin, Y. C. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.030 · Cited by 281
Naderi, M. (2015) · Progress in Filtration and Separation · doi:10.1016/b978-0-12-384746-1.00014-8 · Cited by 279
3D printing of high density polyethylene by fused filament fabrication
Schirmeister, C. G., Hees, T., Licht, E. H., & Mülhaupt, R. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.003 · Cited by 271
Effects of process parameters on porosity in laser powder bed fusion revealed by X-ray tomography
du Plessis, A. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100871 · Cited by 264
Girelli, L., Tocci, M., Gelfi, M., & Pola, A. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.10.026 · Cited by 255
Prediction of porosity in metal-based additive manufacturing using spatial Gaussian process models
Tapia, G., Elwany, A. H., & Sang, H. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.05.009 · Cited by 250
Improved fatigue strength of additively manufactured Ti6Al4V by surface post processing
Kahlin, M., Ansell, H., Basu, D., Kerwin, A., Newton, L., Smith, B., & Moverare, J. J. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.105497 · Cited by 246
Additive manufacturing in the context of structural integrity
Gorelik, M. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.07.005 · Cited by 244
Spoerk, M., Savandaiah, C., Arbeiter, F., Traxler, G., Cardon, L., Holzer, C., & Sapkota, J. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.06.018 · Cited by 241
Deng, D., Moverare, J., Peng, R. L., & Söderberg, H. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.03.085 · Cited by 220
Kovalyuk, V, Ferrari, S., Kahl, O., Semenov, A., Lobanov, Y., Shcherbatenko, M., Korneev, A., Pernice, W., & Goltsman, G. (2017) · Journal of Physics: Conference Series · doi:10.1088/1742-6596/917/6/062032 · Cited by 218
The selection of process parameters in additive manufacturing for aerospace alloys
Yakout, M., Cadamuro, A., Elbestawi, M. A., & Veldhuis, S. C. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0280-7 · Cited by 209
Young’s modulus and volume porosity relationships for additive manufacturing applications
Choren, J. A., Heinrich, S. M., & Silver-Thorn, M. B. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7237-5 · Cited by 208
Dumas, M., Terriault, P., & Brailovski, V. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.021 · Cited by 206
Romano, S., Nezhadfar, P. D., Shamsaei, N., Seifi, M., & Beretta, S. (2020) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2020.102477 · Cited by 197
Additively manufactured functionally graded biodegradable porous iron
Li, Y., Jahr, H., Pavanram, P., Bobbert, F. S. L., Puggi, U., Zhang, X.-Y., Pouran, B., Leeflang, M. A., Weinans, H., Zhou, J., et al. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.07.013 · Cited by 189
Joseph, J., Hodgson, P., Jarvis, T., Wu, X., Stanford, N., & Fabijanic, D. M. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.07.036 · Cited by 188
Additive manufacturing high performance graphene-based composites: A review
Li, Y., Feng, Z., Huang, L., Essa, K., Bilotti, E., Zhang, H., Peijs, T., & Hao, L. (2019) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105483 · Cited by 185
Åsberg, M., Fredriksson, G., Hatami, S., Fredriksson, W., & Krakhmalev, P. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.08.046 · Cited by 184
(Photo)catalyst Characterization Techniques
Yurdakal, S., Garlisi, C., Özcan, L., Bellardita, M., & Palmisano, G. (2019) · Heterogeneous Photocatalysis · doi:10.1016/b978-0-444-64015-4.00004-3 · Cited by 180
Additive manufacturing of polymer composites: Processing and modeling approaches
El Moumen, A., Tarfaoui, M., & Lafdi, K. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.04.029 · Cited by 178
Al-Maharma, A., & Al-Huniti, N. (2019) · Journal of Composites Science · doi:10.3390/jcs3010027 · Cited by 173
Self-citationThe trends and challenges of fiber reinforced additive manufacturing
Fidan, I., Imeri, A., Gupta, A., Hasanov, S., Nasirov, A., Elliott, A., Alifui-Segbaya, F., & Nanami, N. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-03269-7 · Cited by 170
Mechanical characterization of 3D printed polymers for fiber reinforced polymers processing
Türk, D.-A., Brenni, F., Zogg, M., & Meboldt, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.050 · Cited by 168
Karimi, S., Tavakkoli Yaraki, M., & Karri, R. R. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.03.025 · Cited by 168
Mechanical properties of CF-reinforced PLA parts manufactured by fused deposition modeling
Magri, A. E., El Mabrouk, K., Vaudreuil, S., & Touhami, M. E. (2021) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705719847244 · Cited by 168
Ma, C., Andani, M. T., Qin, H., Moghaddam, N. S., Ibrahim, H., Jahadakbar, A., Amerinatanzi, A., Ren, Z., Zhang, H., Doll, G. L., et al. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.06.038 · Cited by 161
Larrosa, N. O., Wang, W., Read, N., Loretto, M. H., Evans, C., Carr, J., Tradowsky, U., Attallah, M. M., & Withers, P. J. (2018) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2018.09.011 · Cited by 161
Numerical simulations of the mesostructure formation in material extrusion additive manufacturing
Serdeczny, M. P., Comminal, R. B., Pedersen, D. B., & Spangenberg, J. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.05.024 · Cited by 160
State-of-the-art of fiber-reinforced polymers in additive manufacturing technologies
Hofstätter, T., Pedersen, D. B., Tosello, G., & Hansen, H. N. (2017) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684417695648 · Cited by 152
Seifi, M., Salem, A. A., Satko, D. P., Ackelid, U., Semiatin, S. L., & Lewandowski, J. J. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.09.163 · Cited by 150
Kan, W. H., Nadot, Y., Foley, M., Ridosz, L., Proust, G., & Cairney, J. M. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100805 · Cited by 148
Kang, Y.-J., Yang, S., Kim, Y., AlMangour, B., & Lee, K. (2019) · Corrosion Science · doi:10.1016/j.corsci.2019.06.030 · Cited by 143
Printing and characterisation of Kagome lattice structures by fused deposition modelling
Gautam, R., Idapalapati, S., & Feih, S. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.10.022 · Cited by 141
Ahmadi, S. M., Kumar, R., Borisov, E. V., Petrov, R., Leeflang, M. A., Li, Y., Tümer, N., Huizenga, R. M., Ayas, C., ZADPOOR, A. A., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.10.043 · Cited by 132
Kim, F. H., Moylan, S. P., Garboczi, E. J., & Slotwinski, J. A. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.06.011 · Cited by 126
Kumar, A. Y., Wang, J., Bai, Y., Huxtable, S. T., & Williams, C. B. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108001 · Cited by 125
In-process monitoring of porosity in additive manufacturing using optical emission spectroscopy
Montazeri, M., Nassar, A. R., Dunbar, A. J., & Rao, P. (2019) · IISE Transactions · doi:10.1080/24725854.2019.1659525 · Cited by 124
Liu, C., Zhang, M. J., & Chen, C. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.07.031 · Cited by 118
Levenhagen, N. P., & Dadmun, M. (2018) · Polymer · doi:10.1016/j.polymer.2018.01.031 · Cited by 114
Agarwal, K., Kuchipudi, S. C., Girard, B., & Houser, M. (2018) · Journal of Composite Materials · doi:10.1177/0021998318762297 · Cited by 113
Hazeli, K., Babamiri, B. B., Indeck, J., Minor, A. M., & Askari, H. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107826 · Cited by 110
Kelly, C. N., Evans, N. T., Irvin, C. W., Chapman, S. C., Gall, K., & Safranski, D. L. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.01.024 · Cited by 109
Kong, D., Ni, X., Dong, C., Zhang, L., Yao, J., Man, C., Wang, L., Xiao, K., & Li, X. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.06.132 · Cited by 108
Ning, F., Cong, W., Hu, Z., & Huang, K. (2017) · Journal of Composite Materials · doi:10.1177/0021998317692659 · Cited by 106
Additive manufacturing – State of art
Rajaguru, K., Karthikeyan, T., & Vijayan, V. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.06.728 · Cited by 106
Predictive model for porosity in powder-bed fusion additive manufacturing at high beam energy regime
Vastola, G., Pei, Q., & Zhang, Y. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.05.042 · Cited by 105
Permeability and strength of a porous metal structure fabricated by additive manufacturing
FURUMOTO, T., Koizumi, A., Alkahari, M. R., Anayama, R., Hosokawa, A., Tanaka, R., & Takashi, U. E. D. A. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.11.043 · Cited by 104
Modeling in Adsorption: Fundamentals and Applications
Unuabonah, E. I., Omorogie, M. O., & Oladoja, N. A. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-814132-8.00005-8 · Cited by 100
Iebba, M., Astarita, A., Mistretta, D., Colonna, I., Liberini, M., Scherillo, F., Pirozzi, C., Borrelli, R., Franchitti, S., & Squillace, A. (2017) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-017-2796-2 · Cited by 96
Yánez, A., Fiorucci, M. P., Cuadrado, A., Martel, O., & Monopoli, D. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.105702 · Cited by 95
Defects as a root cause of fatigue weakening of additively manufactured AlSi10Mg components
Ferro, P., Fabrizi, A., Berto, F., Savio, G., Meneghello, R., & Rosso, S. (2020) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2020.102611 · Cited by 94
Plott, J. S., & Shih, A. J. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.06.009 · Cited by 93
Standard method for microCT-based additive manufacturing quality control 1: Porosity analysis
du Plessis, A., Sperling, P., Beerlink, A., Tshabalala, L. C., Hoosain, S. E., Mathe, N., & le Roux, S. G. (2018) · MethodsX · doi:10.1016/j.mex.2018.09.005 · Cited by 92
Chen, L., & Zhang, X. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.06.252 · Cited by 90
Singh, A. K., Patil, B., Hoffmann, N., Saltonstall, B., Doddamani, M. R., & Gupta, N. (2018) · JOM · doi:10.1007/s11837-017-2734-7 · Cited by 84
Smith, T. R., Sugar, J. D., Schoenung, J. M., & Marchi, C. W. S. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138268 · Cited by 82
Effects of neutron irradiation on microstructure and mechanical properties of pure iron
Singh, B. N., Horsewell, A., & Toft, P. (1999) · Journal of Nuclear Materials · doi:10.1016/s0022-3115(98)00767-3 · Cited by 81
Al‐Maharma, A. Y., & Şendur, P. (2018) · Materials Research Express · doi:10.1088/2053-1591/aaec28 · Cited by 78
Self-citationBartolomeu, F., Fonseca, J. C., Peixinho, N. R. M., Alves, N. M., Gasik, M. I., Silva, F. S., & Miranda, G. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.07.023 · Cited by 77
Sadeghi, E., Karimi, P., Momeni, S., Seifi, M., Eklund, A., & Andersson, J. (2019) · Materials Characterization · doi:10.1016/j.matchar.2019.02.016 · Cited by 74
The Assumptions of the B.E.T. Theory.
McMillan, W. G., & Teller, E. (1951) · The Journal of Physical Chemistry · doi:10.1021/j150484a003 · Cited by 72
Assessment of Surface Area by Gas Adsorption
Sing, K. S. W. (2013) · Elsevier eBooks · doi:10.1016/b978-0-08-097035-6.00007-3 · Cited by 72
Papon, E. A., Haque, A., & Mulani, S. B. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107325 · Cited by 71
Scanning optical microscopy for porosity quantification of additively manufactured components
Wang, P., Tan, X., He, C., Nai, M. L. S., Huang, R., Tor, S. B., & Wei, J. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.03.019 · Cited by 70
Garg, A., Lam, J. S. L., & Savalani, M. M. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-6989-2 · Cited by 69
Valdez, M. A., Kozuch, C. D., Faierson, E. J., & Jasiuk, I. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.07.198 · Cited by 69
Technologies in additive manufacturing for fiber reinforced composite materials: a review
Palanikumar, K., Mudhukrishnan, M., & Soorya Prabha, P. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.01.001 · Cited by 69
Golbang, A., Harkin‐Jones, E., Wegrzyn, M., Campbell, G., Archer, E., & McIlhagger, A. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100920 · Cited by 66
3D bioprinting from the micrometer to millimeter length scales: Size does matter
Hinton, T. J., Lee, A. R., & Feinberg, A. W. (2017) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2017.02.004 · Cited by 65
Wu, M.-W., Chen, J.-K., Lin, B.-H., Chiang, P.-H., & Tsai, M.-K. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.139695 · Cited by 65
Neff, C., Hopkinson, N., & Crane, N. B. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.07.005 · Cited by 64
Dickson, A. N., & Dowling, D. P. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.01.050 · Cited by 63
Park, S.-I., & Rosen, D. W. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.05.006 · Cited by 59
Plott, J. S., Tian, X., & Shih, A. J. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.06.010 · Cited by 54
Poulin, J.-R., Kreitcberg, A., Terriault, P., & Braïlovski, V. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.105394 · Cited by 54
Joshi, N., Romanías, M. N., Riffault, V., & Thévenet, F. (2017) · Aeolian Research · doi:10.1016/j.aeolia.2017.06.001 · Cited by 50
Layer-wise spatial modeling of porosity in additive manufacturing
Liu, J. P., Liu, C., Bai, Y., Rao, P., Williams, C. B., & Kong, Z. (2018) · IISE Transactions · doi:10.1080/24725854.2018.1478169 · Cited by 46
Leuders, S., Meiners, S., Wu, L., Taube, A., Tröster, T., & Niendorf, T. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.04.026 · Cited by 45
Akasheh, F., & Aglan, H. A. (2018) · Journal of Elastomers & Plastics · doi:10.1177/0095244318817867 · Cited by 44
Volume-specific surface area by gas adsorption analysis with the BET method
Gibson, N. A., Kuchenbecker, P., Rasmussen, K., Hodoroaba, V., & Rauscher, H. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-814182-3.00017-1 · Cited by 44
O'Connor, H., & Dowling, D. P. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.04.007 · Cited by 42
Stochastic fracture of additively manufactured porous composites
Keleṣ, Ö., Anderson, E. H., Huynh, J., Gelb, J., Freund, J., & Karakoç, A. (2018) · Scientific Reports · doi:10.1038/s41598-018-33863-4 · Cited by 42
Xu, B., Yin, S., Wang, Y., Li, H., Zhang, B., & Ritchie, R. O. (2017) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.03.002 · Cited by 41
Moustafa, A. R., Dinwiddie, R. B., Pawlowski, A. E., Splitter, D. A., Shyam, A., & Cordero, Z. C. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.05.018 · Cited by 39
Street, D. P., Mah, A. H., Patterson, S., Pickel, D. L., Bergman, J. A., Stein, G. E., Messman, J. M., & Kilbey, S. M. (2018) · Polymer · doi:10.1016/j.polymer.2018.10.004 · Cited by 34
Predicting failure in additively manufactured parts using X-ray computed tomography and simulation
Fieres, J., Schumann, P., & Reinhart, C. (2018) · Procedia Engineering · doi:10.1016/j.proeng.2018.02.008 · Cited by 33
Do additive manufactured parts deserve better?
Yates, J. R., Efthymiadis, P., Antonysamy, A. A., Pinna, C., & Tong, J. (2019) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/ffe.13092 · Cited by 22
Cited by
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
Kan, W. H., Chiu, L. N. S., Lim, C. V. S., Zhu, Y., Tian, Y., Jiang, D., & Huang, A. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-06990-7 · Cited by 309
Metadata
- Authors
- Al-Maharma, A. Y., Patil, S. P., & Markert, B.
- Venue
- Materials Research Express
- Publisher
- IOP Publishing
- Published
- 2020-12-01
- Volume
- 7
- Issue
- 12
- Pages
- 122001
- ISSN
- 2053-1591 (ISSN-L)
- OpenAlex
- W3109991497
- Cited by
- 404
- References
- 126
- FWCI
- 17.26
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.