Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
An improved calculation of ferrite core loss for nonsinusoidal waveforms separates a flux trajectory into major and minor loops via a new recursive algorithm. It is highly accurate and outperforms two previous methods for our measured data. The only characteristics of the material required are the standard Steinmetz-equation parameters.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
General properties of power losses in soft ferromagnetic materials
Bertotti, G. (1988) · IEEE Transactions on Magnetics · doi:10.1109/20.43994 · Cited by 2,162 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Mathematical models of hysteresis
Mayergoyz, I. (1986) · IEEE Transactions on Magnetics · doi:10.1109/tmag.1986.1064347 · Cited by 1,166
[Mathematical models of hysteresis]
Mayergoyz, I. D. (1991) · doi:10.2172/6911694 · Cited by 708
Soft Ferrites—Properties and Applications
Brailsford, F. (1970) · Electronics and Power · doi:10.1049/ep.1970.0192 · Cited by 613
Improved calculation of core loss with nonsinusoidal waveforms
Li, J., Abdallah, T., & Sullivan, C. R. (2002) · Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248) · doi:10.1109/ias.2001.955931 · Cited by 531 · cited 10×
“In [6], the MSE and GSE are compared with experimental data, and while both provide a vastly better approximation than the basic Steinmetz equation (1), and the GSE avoids some problems exhibited in the MSE, each has significant error in at least one region.”
BackgroundMethodResultInfluentialSelf-citation(1998) · doi:10.1016/b978-0-12-093270-2.x5048-x · Cited by 487
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation
Reinert, J., Brockmeyer, A., & De Doncker, R. W. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.806023 · Cited by 409 · cited 4×
“The consideration of these Axioms 1 and 2 allows one to see that the MSE [5] and the model in [20] cannot be expected to work well for truly general consideration of many different possible waveforms; the problems with the MSE were confirmed experimentally in [5].”
BackgroundMethodInfluentialSteinmetz, C. P. (1892) · Transactions of the American Institute of Electrical Engineers · doi:10.1109/t-aiee.1892.5570437 · Cited by 407 · cited 1×
“A similar equation, but without the frequency dependence, was proposed by Steinmetz in 1892 [3], and so (1) is often referred to as the Steinmetz equation.”
BackgroundAn improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform
Fiorillo, F., & Novikov, A. (1990) · IEEE Transactions on Magnetics · doi:10.1109/20.104905 · Cited by 382 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Albach, M., Durbaum, T., & Brockmeyer, A. (2002) · PESC Record. 27th Annual IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1996.548774 · Cited by 225
Research works printed but not linked: 4
- vorperian, 2002, Using fractals to model eddy-current losses in ferromagnetic materials, Switching power Magazine, 3, 18
- mulder, 1995, Power ferrite loss formulas for transformer design, Powerconversion and Intelligent Motion, 21, 22
- 2000, MATLAB Version 6
- ridley, 2002, Modeling ferrite core losses, Switching power Magazine, 3, 6
Cited by
Items 901–1,000 of 1,000
A Comprehensive Loss Analysis of Half-Bridge LLC Resonant Converter used in LED Street Lights
Suel, V., & Kizir, S. (2019) · Global Power, Energy and Communication Conference · doi:10.1109/gpecom.2019.8778526 · Cited by 2
Multiphysics Optimization of Air-Cooled PFC Rectifiers with Wide Bandgap Devices
Zulk, S., & Mertens, A. (2019) · European Conference on Power Electronics and Applications · doi:10.23919/epe.2019.8914816 · Cited by 2
“To summarize briefly, core losses are calculated according to the improved generalized Steinmetz’ equation (iGSE) for non-sinusoidal flux densities [10].”
MethodKaraventzas, V., Biela, J., & Rodriguez-Mateos, F. (2019) · European Conference on Power Electronics and Applications · doi:10.23919/epe.2019.8915101 · Cited by 2
“The core losses are calculated with the improved generalized Steinmetz equation (iGSE) [12], by use of the magnetic flux change rate in the core and the Steinmetz parameters for each core material.”
MethodReview of Core Power Loss Analysis Using Finite Element Methods
González-Teodoro, J. R., Enrique, R.-C., & Asensi, R. (2019) · International Journal of Magnetics and Electromagnetism · doi:10.35840/2631-5068/6523 · Cited by 2
“The improved Generalized Steinmetz equation [10] was developed to avoid the limitation in the third higher harmonic.”
MethodClosed-Form Solutions for Core and Winding Losses Calculation in Single-Phase Boost PFC Rectifiers
Jacoboski, M. J., Lange, A. D. B., & Heldwein, M. L. (2019) · IEEE Brazilian Power Electronics Conference and Southern Power Electronics Conference · doi:10.1109/cobep/spec44138.2019.9065521 · Cited by 2
“A well known core loss model to non-sinusoidal excitation waveforms is the Improved Generalized Steinmetz Equation (iGSE) [3], which considers the magnetic flux density and its history in a model that uses the Steinmetz equation parameters often given by magnetic core manufacturers.”
MethodTransformer and Frequency Optimization in a GaN-Based Active-Clamp Flyback Converter
Nadler, A. B., Stein, A. L. F., & Sullivan, C. R. (2020) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec39645.2020.9124050 · Cited by 2
“Core loss is calculated with the improved Generalized Steinmetz Equation [14] due to the non-sinusoidal, piecewise linear nature of flyback converter waveforms.”
MethodSelf-citationComputational Cost Efficient Model of Losses for Multi-port Active-bridge Converters
Galeshi, S., Frey, D., & Lembeye, Y. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9236119 · Cited by 2
Harmonic filter with low coupling capacitance for Medium Voltage, high dv/dt PWM converters
Pawaskar, V. U., Nguyen, V. T., Gohil, G., & Balsara, P. T. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9235838 · Cited by 2
“For computing core losses in Lf and Lg “Improved Generalized Steinmetz Equation” (IGSE), and GSE are used respectively [9], [10].”
MethodMaheri, H. M., Chub, A., & Vinnikov, D. (2020) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel49091.2020.9265800 · Cited by 2
“An improved method described in [16] is adopted for the calculation of the core losses.”
MethodModeling and Integrating Losses of Magnetic Components Into Time-Domain Electric Circuit Simulations
Djekanovic, N., Luo, M., & Dujić, D. (2020) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc-ecceasia48364.2020.9367883 · Cited by 2
“According to [12], the IGSE is determined by the following expression”
BackgroundMethodDesign of a Single Chip, Single Core, ZVS Buck Converter in MHz Domain
Sanusi, B. N., Beleggia, M., & Ouyang, Z. (2021) · IEEE ECCE Asia Downunder · doi:10.1109/ecce-asia49820.2021.9479114 · Cited by 2
“Core loss can be calculated using improved Generalized Steinmetz Equation (iGSE) [8], given the available Steinmetz parameter of the core material.”
MethodStudy of Back-end DC/DC Converter for 3.7 kW Wireless Charging System according to SAE J2954
Yu, G., Soeiro, T. B., Dong, J., & Bauer, P. (2021) · IEEE International Conference on Compatibility, Power Electronics and Power Engineering · doi:10.1109/cpe-powereng50821.2021.9501207 · Cited by 2
Design of a 10 kW, High-Frequency Dual Active Bridge Converter Using SiC Devices
Jin, H., Li, H., Wen, J., Yang, C., Kong, H., & Wang, L. (2021) · IEEE Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia) · doi:10.1109/wipdaasia51810.2021.9656007 · Cited by 2
Practical Design of A Dry-type 200kVA 10kHz Transformer With Nanocristalline Core
Chen, Y., Chen, W., Cao, Z., Jiang, J., & Shen, Z. (2021) · IEEE Sustainable Power and Energy Conference (iSPEC) · doi:10.1109/ispec53008.2021.9735732 · Cited by 2
“To evaluate the core loss under square wave excitation, the improved Generalized Steinmetz equation is proposed[17].”
MethodXu, H., Dong, J., Li, C., Wang, Y., Mei, Y., Shi, J., & Zhao, M. (2022) · IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific) · doi:10.1109/itecasia-pacific56316.2022.9941831 · Cited by 2
Determination of Losses in Steel of an Induction Motor at Its Deep Saturation
Chenchevoi, V., Chencheva, O., Serhiienko, S. A., Bezuhlyi, M., Kutsevol, V., & Саленко, О. Ф. (2022) · IEEE International Conference on Modern Electrical and Energy System (MEES) · doi:10.1109/mees58014.2022.10005719 · Cited by 2
Frequency optimisation for DC/DC converters in DC-connected offshore wind turbines
Timmers, V. R. J. H., Egea‐Àlvarez, A., & Gkountaras, A. (2023) · European Conference on Power Electronics and Applications · doi:10.23919/epe23ecceeurope58414.2023.10264511 · Cited by 2
“The IGSE is given by [23] where B is the instantaneous magnetic flux density, ∆ B is the peak-to-peak magnetic flux density, and k i is calculated using where k , α , and β are the Steinmetz parameters of the iron core material.”
MethodA Basic Design Tool for Grid-Connected AC–DC Converters Using Silcon Carbide MOSFETs
Kim, M., & Yun, H.-J. (2023) · Electronics · doi:10.3390/electronics12234828 · Cited by 2
“The conduction losses of an inductor are calculated using the resistance calculated from the cross-sectional area and length of the inductor windings, and the effective value of the current flowing in the inductor and the iron losses are calculated using the Steinmetz equation shown in (12) [25].”
MethodMedium-Frequency Transformer Design Considerations for Water Electrolyzers Power Supply
Herzig, F., & Doncker, R. W. D. (2024) · CPSS & IEEE International Symposium on Energy Storage and Conversion (ISESC) · doi:10.1109/isesc63657.2024.10785451 · Cited by 2
“The materials specific core losses under the non-sinusoidal excitation in single phase-shift modulation of the DAB3 are calculated using the improved generalized Steinmetz equation derived in [37].”
Power conversion and scaling for vanishingly small satellites with electric propulsion
Hansel, G. J. (2014) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 2
Form-Factor-Constrained, High Power Density, Extreme Efficiency and Modular Power Converters
Wang, Q. (2018) · VTechWorks (Virginia Tech) · Cited by 3
Modular Power Converters for Smart Transformer Architectures
Costa, L. F. (2019) · MACAU: Open Access Repository of Kiel University (University Library Kiel) · Cited by 9
Fratila, M. (2012) · theses.fr (ABES) · doi:10.70675/55b7c95ez33b3z4793za3b0za8878f51f47d · Cited by 2
“[36] ont proposé une amélioration pour le modèle GSE appelée « improved Generalized Steinmetz Equation » (iGSE).”
Etayo, A. M. (2017) · theses.fr (ABES) · doi:10.70675/4d77e457zc94fz4b41zaebazd23e318a5268 · Cited by 9
Convertisseurs continu-continu pour les réseaux d'électricité à courant continu
Lagier, T. (2016) · theses.fr (ABES) · doi:10.70675/be125173z16c4z407fza5b1zea2c1fa1cf86 · Cited by 6
Pascal, Y. (2019) · theses.fr (ABES) · doi:10.70675/3ac79b20z613bz47a2zb8aazeac7aed49765 · Cited by 2
Proyecto de transformadores de pulsos de potencia
Tacca, H. E. (2020) · Elektron · doi:10.37537/rev.elektron.4.2.102.2020 · Cited by 1
Self-citationTurton, N., Pearce, C., Galassini, A., & Degano, M. (2021) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd51469.2021.9425676 · Cited by 1
“Again, these may be obtained with offline modelling using FEA, a curve fitting method such as Steinmetz [19] [20] or detailed motor characterization testing.”
MethodWei, X. H., Jin, L., Shen, Z., Xu, Z., Wang, T., & Leng, J. (2021) · IEEE International Power Electronics and Application Symposium (PEAS) · doi:10.1109/peas53589.2021.9628454 · Cited by 1
48V to 1V Active-Clamp Stacked Direct Forward Converter
Sinha, S., Majmunović, B., & Maksimović, D. (2023) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel52896.2023.10221063 · Cited by 1
“Given the transformer design and the selected switching frequency, core losses are evaluated using the iGSE method [9].”
MethodAn Improved Integrated Grid Inductor-Transformer Magnetic Structure for Single-Stage EV Charger
Nguyen, D. B.-H., Kieu, H.-P., Geda, M. G., & Choi, S. (2024) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc-ecceasia60879.2024.10567829 · Cited by 1
“Accordingly, core loss is calculated utilizing the Improved Generalized Steinmetz equation (IGSE) in [13].”
MethodGiraud, A., & Vangraefschèpe, F. (2024) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icem60801.2024.10700575 · Cited by 1
“Several means of achieving a satisfactory level of precision have been proposed: improving classical models [3][4], numerical models based on the electromagnetic field computation [5] and models using an iron loss mapping as a function of fields and their dynamics [6], requiring in both last cases…”
MethodReliability Evaluation of the Universal Power Electronic Interface Converter for PV Applications
Khan, S., Chub, A., Vinnikov, D., Kasper, M., & Deboy, G. (2024) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/pemc61721.2024.10726360 · Cited by 1
“The calculation of core losses is performed through the improved generalized Steinmetz equation [18] while considering the core volume and utilizing data provided in the datasheet.”
MethodImpact of Non-Uniform Flux Density on Core Losses: A Case Study on Standard Core Geometries
Arruti, A., Agote, A., Anzola, J., Aizpuru, I., & Mazuela, M. (2024) · Energy Conversion Congress and Expo Europe (ECCE Europe) · doi:10.1109/ecceeurope62508.2024.10752032 · Cited by 1
“• Many of the other core loss modeling techniques, including the most common iGSE [28], are built upon the same basis of the SE, thus the conclusions achieved from the analysis with the SE should hold true for the other approaches.”
Measurements of Minor Loop Position and Shape Depending on Inductor Excitation Process
Oda, K., Takano, K., & Wãda, K. (2024) · IEEJ Transactions on Industry Applications · doi:10.1541/ieejias.144.808 · Cited by 1
Operating Frequency Range of Air Core Magnetic Inductors for Very High Frequency Power Converters
Salomez, F., Jugoo, A., & Lembeye, Y. (2024) · IEEE Design Methodologies Conference (DMC) · doi:10.1109/dmc62632.2024.10812116 · Cited by 1
“It is also possible to use behavioural models like the Steinmetz model [28] and its derivatives [29]–[31] for non sinusoidal excitation or for temperature dependence [32].”
Shen, X., Cobaleda, D. B., Wouters, H., Tian, F., Pervaiz, H., & Martinez, W. H. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861454 · Cited by 3
Magnetization Mechanism-Inspired Neural Network for Core Loss Estimation
Huang, Q., Li, S., Li, Y., & Zhu, J. G. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10860885 · Cited by 1
Comprehensive SPICE Model for Inductors Considering Magnetic Losses Under DC Bias Current
Sato, Y., Matsumoto, H., Kotani, J., Tomioka, S., & Tanaka, K. (2025) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48143.2025.10977243 · Cited by 1
“Additionally, we applied a method based on the improved generalized Steinmetz equation (iGSE ) [6][7] to evaluate the loss under a triangular current with I dc .”
Liu, Z., Zhu, L., Gao, Y., Dang, Y., Zhan, C., & Ji, S. (2025) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48143.2025.10977337 · Cited by 1
Queiroz, S. S., & Costa, L. F. (2025) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48143.2025.10977402 · Cited by 1
Magnetic Integration Applied to an Isolated Single-Stage AC–DC Converter
Barbosa, S. G., de Araújo, J. W. M., Friebe, J., Tofoli, F. L., & Oliveira, D. S. (2025) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2025.3588047 · Cited by 1
“Core losses are calculated using the generalized Steinmetz equation (GSE) [36], considering the corresponding peak flux values.”
Seo, B.-H., & Kim, R.-Y. (2025) · Journal of Electrical Engineering and Technology · doi:10.1007/s42835-025-02350-y · Cited by 1
“( 6), L and l g are inversely proportional, indicating that the proposed transformer structure can reduce the air-gap length. magnetic flux density and peak-to-peak value of the mag - netic flux density, ∆ B [ 12].”
Multi-Objective Magnetic Design of Powder Core Inductors Based on Deep Reinforcement Learning
Guo, Z., Chen, Z., Li, Z., Yin, S., & Ma, X. (2025) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2025.3608738 · Cited by 1
“The Steinmetz equation provides an expression to rapidly calculate the core loss densities as a function of the flux density amplitude B m and the frequency f [10].”
Kim, G., Kim, D.-J., Kim, R.-Y., & Lee, M. J. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3611905 · Cited by 1
“In the case of actual pulsewidth modulation (PWM) or nonsinusoidal signal conditions, the generalized Steinmetz equation (GSE) or improved GSE may be applied [39], [40].”
Triaxial Air-Core Inductors for Variable Frequency Soft-Switching in Three-Phase Inverters
Fahmy, Y., Fix, E., & Preindl, M. (2025) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2025.3620312 · Cited by 1
“These losses, commonly modeled by variations on the Steinmetz equation [1], [16], are the most complicated to model.”
Yang, X., Zhiping, Z., Yang, W., & Shen, X. (2025) · IEEE Access · doi:10.1109/access.2025.3630785 · Cited by 1
“Conventional core loss estimation methods, such as empirical models and curve-fitting approaches like the extended Steinmetz Equation [5], [6], [7], often prove inadequate, neglecting critical real operational factors like DC bias.”
Jeong, M., Ewald, T., & Biela, J. (2025) · Energy Conversion Congress and Expo Europe (ECCE Europe) · doi:10.1109/ecce-europe62795.2025.11238732 · Cited by 1
“For the core losses calculation, the improved generalized Steinmetz equation (iGSE) is used [12].”
Banu, N., Pasquale, M., & Fiorillo, F. (2025) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2025.3638155 · Cited by 1
“It is overwhelmingly the case with the Steinmetz’s equation, which has been repeatedly generalized and tailored to specific induction waveforms and materials [9], [10], [11], [12].”
Wu, X., Rashid, S. S., Saboor, A., & Afridi, K. K. (2025) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce58356.2025.11259982 · Cited by 1
Havugimana, E., & Ranjram, M. K. (2025) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce58356.2025.11259906 · Cited by 1
“However, users of IGSE [2] or SE [1] equations do not typically need to know how to fit the parameters, as they are readily available from other researchers, lowering the barrier to entry or easier to fit in any platform.”
Bouvier, Y. E., FERNANDEZ-ZOLOTUSHCHENKO, Y., Rodríguez-Lorente, A., & Vaquero, J. (2025) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2025.3647775 · Cited by 1
“…been proposed in the literature to account for non-sinusoidal wave-forms and additional effects on core losses, including the Modified Steinmetz Equation (MSE) [38], the Generalized ) [39], the Improved GSE (IGSE) [36], the Improved IGSE (I 2 GSE) [20], and the Waveform Coefficient SE (WcSE) [40].”
Chatterjee, C., Nag, S. S., & Ebel, T. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3650346 · Cited by 1
“The core loss of the magnetic components is calculated using the improved generalized Steinmetz equation [26].”
Jin, H., Pei, Y., Wang, L., Zhang, C., Dong, X., Wang, G., & Wang, T. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3669228 · Cited by 1
“The improved generalized Steinmetz equation [35] can be used to calculate the core loss of a nonsinusoidal waveform.”
Dang, Y., Zhu, L., Liu, Z., & Ji, S. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3668908 · Cited by 2
“The core loss density is calculated by Steinmetz’s improved generalized equation (IGSE), as shown in (11)–(13) [19].”
A Multi-Factor Fusion Network With Transfer Learning for Magnetic Core-Loss Prediction
Xu, L., Zhang, L., Chen, K., jingyi, X., Wang, L., Chen, Y., Shao, T., & Hu, J. P. (2025) · Asia Power and Electrical Technology Conference (APET) · doi:10.1109/apet68390.2025.11428828 · Cited by 1
A Novel CHB+MAB based Solid-State Transformer Architecture for Fast Charging EV Grids
Kadam, S. S., França, J. V. G., Christou, I., Zanden, M. V. D., & Costa, L. F. (2026) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec51134.2026.11516637 · Cited by 1
“Ferrite core losses were estimated following [14], and Litz wire AWG 38 was used in accordance 1323 Authorized licensed use limited to the terms of the applicable license agreement with IEEE.”
França, J. V. G., Costa, L. F., Queiroz, S. S., Cao, B., & Guo, Z. (2026) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2026.3699737 · Cited by 2
“10(a), is mainly based on [23], [93], [157], [158].”
Wang, Y., Liu, Y., Mo, L., Wang, W., Ren, S., Cai, G., Liu, S., Wu, H., Ma, M., & Jiang, C. Q. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3715566 · Cited by 1
“The classical form is limited to sinusoidal excitation, while generalized Stein-metz (GSE), improved GSE (iGSE), and improved iGSE extend accuracy to arbitrary, pulsewidth modulation, high-frequency, and minor-loop conditions [12], [13], [14].”
An Optimal Design Methodology for Modular GaN-Based Bidirectional On-Board Charging Systems
Bay, O., Hegazy, O., Lataire, P., & Baghdadi, M. E. (2026) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2026.3725150 · Cited by 1
“The core loss density under triangular or trapezoidal magnetic excitation is computed using the improved Generalized Steinmetz Equation (iGSE) [41], which integrates the instantaneous rate of change of flux density, weighted by the peak flux density over one switching period.”
High Frequency Effects in the Core
Hurley, W. G., & Wolfle, W. H. (2013) · Wiley eBooks · doi:10.1002/9781118544648.ch7 · Cited by 1
Discontinuous mode sparse Dyna-C rectifier for efficient AC/DC power conversion
De, A., & Bhattacharya, S. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310606 · Cited by 1
“The value of ki can be obtained from the following formula as mentioned in [15]:2 1”
MethodAlbach, M. (2017) · Springer eBooks · doi:10.1007/978-3-658-15081-5_8 · Cited by 1
A power supply reaching titanium level efficiency for a wide range of input voltages
Konrad, W., Rainer, C., Deboy, G., & Muetze, A. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6647147 · Cited by 1
“Core loss For the calculation of the core losses of the inductors and the transformer the improved general Steinmetz equations (iGSE) formulas have been used [8], [9], [10], see eq.”
MethodImproving the light-load efficiency of VRMs using parallel inductors
Collins, C., & Duffy, M. C. (2010) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2010.5618378 · Cited by 1
“Core loss for the inductors was calculated by applying manufacturer’s loss data in the improved Generalised Steinmetz Equation for non-sinusoidal voltage waveforms [10].”
MethodVariable-Frequency Pulse-Width Modulation for an Improved Grid-Connected Converter Efficiency
Dick, C., Biskoping, M., Richter, S. A., & Doncker, R. W. D. (2008) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/08ias.2008.314 · Cited by 1
“As expected, the operating frequency changes periodically with double the grid frequency, i.e. 100Hz.”
BackgroundOuyang, S., Liu, J., Song, S., & Wang, X. (2015) · IEEE International Future Energy Electronics Conference (IFEEC) · doi:10.1109/ifeec.2015.7361616 · Cited by 1
“According to the Improved Generalized Steinmetz Equation (4)[7][8], the core loss occurs only at the time duration when dB/dt≠0, so the core loss of MAB HFT is further decreased.”
MethodA powertrain loss model for the flyback AC module with pseudo-dc link in continuous conduction mode
Fonkwe, E., Kirtley, J. L., & Owusu-Akyaw, A. (2015) · International Conference on Smart Grid and Clean Energy Technologies · doi:10.1109/icsgce.2015.7454275 · Cited by 1
Optimum design of a flyback PV microinverter under hybrid DCM/BCM operation
Christidis, G. C., Nanakos, A. C., & Tatakis, E. C. (2016) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2016.7695626 · Cited by 1
“…saturation limit, maximum breakdown voltage of the switches [9], [13], maximum transformer fill factor [21]) are input in a software platform [23] and the differential evolution stochastic method for constrained nonlinear global optimization is used to determine the optimal component values.”
MethodImproved prediction of hysteresis losses in electrical machine cores
Ioniţă, V., Petrescu, L., Cazacu, E., Patroi, E., & Manta, E. (2017) · International Conference on Modern Power Systems (MPS) · doi:10.1109/mps.2017.7974403 · Cited by 1
Thermodynamic analysis of coupled mechanical and power systems in data centers
Ahmed, F., & Wemhoff, A. P. (2017) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm.2017.7992591 · Cited by 1
Yan, W., Chen, H., Xu, T., & Wang, K. (2018) · COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering · doi:10.1108/compel-12-2017-0511 · Cited by 1
A Simple Technique for In-circuit Core Loss Measurement of Medium Frequency Transformer
Zhang, Z., Zhang, L., & Qin, J. (2019) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2019.8721933 · Cited by 1
“The authors in [10] prove that iGSE can estimate core loss under non-sinusoidal excitation voltage waveforms with very good accuracy if the Steinmetz parameters are best fitted.”
BackgroundMethodCharacterization of Soft Ferrite Cores in Power Electronic Applications
Rimal, H. P., Antonio, S. Q., Ghanim, A. M., & Cutugno, F. (2019) · IEEE International Forum on Research and Technology for Society and Industry (RTSI) · doi:10.1109/rtsi.2019.8895575 · Cited by 1
Keel, O., & Biela, J. (2019) · European Conference on Power Electronics and Applications · doi:10.23919/epe.2019.8915124 · Cited by 1
“The core losses are calculated with the iGSE method [15] which uses the extracted Steinmetz parameters from the data sheet.”
MethodA Robust Modified Model Predictive Control Algorithm for Quasi-Z Source Inverters
Qin, S., Liu, P., & Huang, S. (2019) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2019.8922461 · Cited by 1
Evaluation of Active Capacitor Bank for Floating H-bridge Power Modules
Nguyen, T. K. T., Wen, B., Burgos, R. P., Boroyevich, D., Verhulst, J., Vrtachnik, D. L., & Belkhayat, M. (2020) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec39645.2020.9124120 · Cited by 1
Experimental Validation of the Performances of an Inverter Sized with Optimization Methods
Voldoire, A., Schanen, J., Ferrieux, J.-P., Derbey, A., Gautier, C., & Ali, M. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215742 · Cited by 1
“This induction ripple is used in the analytical formulation of iGSE model [10] to compute iron losses (4).”
MethodNielsen, A. B., Hurley, W. G., Davari, P., Duffy, M. C., Blaabjerg, F., & Nielsen, B. V. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9236308 · Cited by 2
“The time averaged core losses per volume using IGSE [12] can therefore be calculated by Pv = 1 T ∫ T 0 ki ∣∣∣∣dBdt ∣∣∣∣ α (ΔB) β−α dt (25) ki = Kc (2π) α−1 ∫ 2π 0 |cos(θ)|α 2β−αdθ (26) In this case however, the core flux waveform is triangular and is therefore piecewise linear and contains no minor loops.”
BackgroundMethodInfluentialA Multi Variable Optimization Design of High Frequency Transformer Based on ALO algorithm
Zhan, L., Bao-chang, X., & Li, R. (2020) · International Conference on HVDC (HVDC) · doi:10.1109/hvdc50696.2020.9292855 · Cited by 1
A Novel Power Loss Calculation Method for Power Magnetic Components in Power Converters
Ishikura, Y., Hosotani, T., & Yamamoto, M. (2020) · IEEJ Transactions on Fundamentals and Materials · doi:10.1541/ieejfms.141.69 · Cited by 1
Design of an Inductor-Integrated Transformer Applied to Inverter Power Supply
Zhang, X., Wang, R., Xiao, F., Jie, G., Lou, X., & Yang, B. (2020) · IEEE China International Youth Conference on Electrical Engineering (CIYCEE) · doi:10.1109/ciycee49808.2020.9332613 · Cited by 1
Topology Morphing Control of Low-Cost PV Microconverters
Maheri, H. M., Vinnikov, D., Chub, A., & Sidorov, V. E. (2021) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/pemc48073.2021.9432496 · Cited by 1
Robustness Assessment of the EMI Filter in a Three-Level Inverter
Shen, Z., Chen, M., Wang, H., Wang, X., & Blaabjerg, F. (2021) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec42165.2021.9487417 · Cited by 1
Lasek, P., & Stępień, M. A. (2021) · Journal of Energy Resources Technology · doi:10.1115/1.4052791 · Cited by 1
Cittanti, D., Vico, E., Gregorio, M., & Bojoi, R. I. (2021) · International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME) · doi:10.1109/iceccme52200.2021.9590926 · Cited by 2
“The core losses can be estimated leveraging the improved generalized Steinmetz equation (iGSE) [21] as”
BackgroundRies, L. K., & Heldwein, M. L. (2021) · Eletrônica de Potência · doi:10.18618/rep.2021.4.0018 · Cited by 1
Integrated Inductor for A Highly Compact 2-Phase Interleaving ZVS Buck Converter
Sanusi, B. N., & Ouyang, Z. (2022) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43599.2022.9773651 · Cited by 1
“From consideration of accuracy and required measurements, the improved Generalized Steinmetz Equation (iGSE) method proposed in [19] is used to estimate core loss.”
MethodDesign optimization of Aalborg-type transformerless PV inverters with focus on power quality
Orfanoudakis, G. I., Foteinopoulos, G., Eftychios, K., & Wu, W. (2022) · International Conference on Modern Circuits and Systems Technologies · doi:10.1109/mocast54814.2022.9837575 · Cited by 1
“The inductor core losses are estimated based on the improved Generalized Steinmetz Equation (iGSE) method, proposed in [25].”
MethodIron Loss Calculation Based on Loss Surface Hysteresis Model and Its Verification
Li, W., Fan, X., Sun, Y., & Zhu, L. (2022) · IEEE International Electrical and Energy Conference (CIEEC) · doi:10.1109/cieec54735.2022.9846296 · Cited by 1
Potter, J., Pfost, M., & Schullerus, G. (2022) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icem51905.2022.9910845 · Cited by 1
“The hysteresis losses are calculated using the approach in [12] by separating the flux waveform of each segment into k major and minor loops of amplitude Bm and offset Bdc and then using (11) to calculate the losses of each loop, where T denotes the symmetry period.”
MethodA novel estimation model for hysteresis loss based on semi-minor loops
Chen, J., Ma, J., Wu, S., Qiu, L., Liu, X., & Fang, Y. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.10.171 · Cited by 1
Multi-Objective Computational Aided Design Tool Using Pareto Analysis
Castro, P. A. D. C. E., Morais, L. M. F., & de Oliveira, T. R. (2022) · Electronics · doi:10.3390/electronics11223676 · Cited by 1
Switching Frequency Modulation of a 27 kW DC-DC Converter with Si-IGBTs in Light-Load Operation
Kunstbergs, N., Hinz, H., Schofield, N., & Mengus, S. (2022) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/pemc51159.2022.9962914 · Cited by 1
“TABLE I COMPARISON OF SE, MODIFIED STEINMETZ EQUATION (MSE) AND IMPROVED GENERALIZED STEINMETZ EQUATION (IGSE) [19], [20]”
BackgroundThermal Characterization of Magnetic Components in Still Air
Bertoldi, B., Militão, L. A., de Sousa, G. J. M., Barbosa, J. R., Jr., & Heldwein, M. L. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3253076 · Cited by 1
“by measuring the magnetic flux variation through an auxiliary winding [6], [7], [8], [9], [10], [11].”
BackgroundKondo, R., & Funaki, T. (2023) · IEEJ Transactions on Industry Applications · doi:10.1541/ieejias.143.292 · Cited by 2
Multiport Resonant GaN-based DC/DC Converter for Automotive On-board Low-Voltage Bus
Metschies, D., Pereira, T., Groon, F., Schikowski, S., Placzek, J. M., & Liserre, M. (2023) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43580.2023.10131432 · Cited by 1
“improved generalized Steinmetz equation (IGSE) model [16] with (9), where ∆B denotes the occuring peak-to-peak flux density.”
BackgroundMagnetic and Winding Loss Estimation Using Harmonic Binning
Orzechowski, R., Jahnes, M., Fahmy, Y., Zhou, L., & Preindl, M. (2023) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec55900.2023.10187112 · Cited by 1
“Modeling the losses of magnetic cores is a notoriously challenging task with some preferring the use of finite-element analysis (FEA) [6]–[8], citing that while others use the Stein-metz equation and its derivatives [9]–[13].”
MethodFießer, S., & Schwalbe, U. (2023) · European Conference on Power Electronics and Applications · doi:10.23919/epe23ecceeurope58414.2023.10264583 · Cited by 1
“The verification of the power loss calculations can be taken from [1], [7], [10].”
BackgroundMethodArruti, A., Aizpuru, I., & Mazuela, M. (2023) · European Conference on Power Electronics and Applications · doi:10.23919/epe23ecceeurope58414.2023.10264494 · Cited by 1
Metadata
- Authors
- Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H.
- Affiliations
- Dartmouth College (US)
- Universidad de Buenos Aires (AR)
- Venue
- 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings.
- Publisher
- IEEE
- Published
- 2003-06-26
- Pages
- 36-41
- ISSN
- 2151-0997 (ISSN-L)
- OpenAlex
- W2109185194
- Cited by
- 1,145
- References
- 23
- Citations by year
- 2026: 49 · 2025: 76 · 2024: 105 · 2023: 82 · 2022: 99 · 2021: 85 · 2020: 104 · 2019: 86 · 2018: 66 · 2017: 67 · 2016: 57 · 2015: 45 · 2014: 47 · 2013: 40 · 2012: 33
- FWCI
- 5.50
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE ... Workshop on Control and Modeling for Power Electronics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Magnetic Properties and Synthesis of Ferrites
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Keywords
- non-sinusoidal waveforms, hysteresis loss, recursive algorithm, magnetic materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.