Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
An improved calculation of ferrite core loss for nonsinusoidal waveforms separates a flux trajectory into major and minor loops via a new recursive algorithm. It is highly accurate and outperforms two previous methods for our measured data. The only characteristics of the material required are the standard Steinmetz-equation parameters.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
General properties of power losses in soft ferromagnetic materials
Bertotti, G. (1988) · IEEE Transactions on Magnetics · doi:10.1109/20.43994 · Cited by 2,162 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Mathematical models of hysteresis
Mayergoyz, I. (1986) · IEEE Transactions on Magnetics · doi:10.1109/tmag.1986.1064347 · Cited by 1,166
[Mathematical models of hysteresis]
Mayergoyz, I. D. (1991) · doi:10.2172/6911694 · Cited by 708
Soft Ferrites—Properties and Applications
Brailsford, F. (1970) · Electronics and Power · doi:10.1049/ep.1970.0192 · Cited by 613
Improved calculation of core loss with nonsinusoidal waveforms
Li, J., Abdallah, T., & Sullivan, C. R. (2002) · Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248) · doi:10.1109/ias.2001.955931 · Cited by 531 · cited 10×
“In [6], the MSE and GSE are compared with experimental data, and while both provide a vastly better approximation than the basic Steinmetz equation (1), and the GSE avoids some problems exhibited in the MSE, each has significant error in at least one region.”
BackgroundMethodResultInfluentialSelf-citation(1998) · doi:10.1016/b978-0-12-093270-2.x5048-x · Cited by 487
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation
Reinert, J., Brockmeyer, A., & De Doncker, R. W. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.806023 · Cited by 409 · cited 4×
“The consideration of these Axioms 1 and 2 allows one to see that the MSE [5] and the model in [20] cannot be expected to work well for truly general consideration of many different possible waveforms; the problems with the MSE were confirmed experimentally in [5].”
BackgroundMethodInfluentialSteinmetz, C. P. (1892) · Transactions of the American Institute of Electrical Engineers · doi:10.1109/t-aiee.1892.5570437 · Cited by 407 · cited 1×
“A similar equation, but without the frequency dependence, was proposed by Steinmetz in 1892 [3], and so (1) is often referred to as the Steinmetz equation.”
BackgroundAn improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform
Fiorillo, F., & Novikov, A. (1990) · IEEE Transactions on Magnetics · doi:10.1109/20.104905 · Cited by 382 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Albach, M., Durbaum, T., & Brockmeyer, A. (2002) · PESC Record. 27th Annual IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1996.548774 · Cited by 225
Research works printed but not linked: 4
- vorperian, 2002, Using fractals to model eddy-current losses in ferromagnetic materials, Switching power Magazine, 3, 18
- mulder, 1995, Power ferrite loss formulas for transformer design, Powerconversion and Intelligent Motion, 21, 22
- 2000, MATLAB Version 6
- ridley, 2002, Modeling ferrite core losses, Switching power Magazine, 3, 6
Cited by
Items 201–300 of 1,000
Quadrilateral Current Mode Paralleling of Power MOSFETs for Zero-Voltage Switching
Shen, Y., Jiang, Y., Zhao, H. L., Shillaber, L., Jiang, C., & Long, T. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3029545 · Cited by 32
“is based on the improved generalized Steinmetz equation [48].”
MethodA comparison of insulated DC-DC converters for HVDC off-shore wind farms
Lagier, T., & Ladoux, P. (2015) · International Conference on Clean Electrical Power · doi:10.1109/iccep.2015.7177597 · Cited by 32
“To calculate the core losses, Improved General Steinmetz Equations (IGSE) were used by considering the flux waveforms [9].”
MethodCore loss behavior in high frequency high power transformers—I: Effect of core topology
Bahmani, M. A., Agheb, E., Thiringer, T., Høidalen, H. K., & Serdyuk, Y. V. (2012) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.4727910 · Cited by 41
Thummala, P., Schneider, H., Zhang, Z., Ouyang, Z., Knott, A., & Andersen, M. A. E. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2379439 · Cited by 32
Zhou, K., Ivančo, A., Filipi, Z. S., & Hofmann, H. F. (2015) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2015.2451094 · Cited by 32
“Several rotor positions within one period are then simulated, and the average torque is calculated and stored in the database for later use.”
SiC-MOSFET composite boost converter with 22 kW/L power density for electric vehicle application
Kim, H., Chen, H., Maksimović, D., Erickson, R. W., Cole, Z., Passmore, B., & Olejniczak, K. J. (2017) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2017.7930684 · Cited by 32
“Core loss is calculated according to the iGSE method [10].”
MethodMehrabadi, N. R., Wang, Q., Burgos, R. P., Roy, C. J., & Boroyevich, D. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3005456 · Cited by 33
Wang, F. “., Chen, G., Boroyevich, D., Ragon, S., Arpilliere, M., & Stefanović, V. R. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2001895 · Cited by 32
Optimized Integrated Harmonic Filter Inductor for Dual-Converter-Fed Open-End Transformer Topology
Gohil, G., Bede, L., Teodorescu, R., Kerekes, T., & Blaabjerg, F. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2562679 · Cited by 33
“The improved generalized Steinmetz equation [28], [29] is used to calculate the core losses.”
MethodHurley, W. G., Merkin, T., & Duffy, M. C. (2018) · IEEE Power Electronics Magazine · doi:10.1109/mpel.2018.2848738 · Cited by 31
Dell’Isola, D., Urbain, M., Weber, M., Pierfederici, S., & Meibody‐Tabar, F. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2948038 · Cited by 31
“Equation (28) is based on an improved model of the Steinmetz core losses iGSE [33], where α and β are the Steinmetz parameters, BL is the magnetic flux density through the core and Bpp its peak–peak value, and kiGSE i is a constant coefficient related to the Steinmetz proportional parameters.”
MethodEfficiency-Optimized Modulation Scheme for Three-Phase Dual-Active-Bridge DC–DC Converter
Cúnico, L. M., Alves, Z. M., & Kirsten, A. L. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2992961 · Cited by 31
“The magnetic core losses of the inductor and transformer are evaluated using the iGSE method, as presented in [20].”
MethodArtificial Neural Network Aided Loss Maps for Inductors and Transformers
Rasekh, N., Wang, J., & Yuan, X. (2022) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2022.3223936 · Cited by 31
“Moreover, this approach is still limited by the frequency dependency of the original Steinmetz parameters [1] and the dependency on the geometries of individual components (e.”
BackgroundMethodInfluentialOptimal design and tradeoffs analysis for planar transformer in high power DC-DC converters
Ouyang, Z., Thomsen, O. C., & Andersen, M. A. E. (2010) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2010.5543390 · Cited by 40
Smołka, J., Bíró, O., & Nowak, A. J. (2009) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-009-9032-7 · Cited by 33
“Regarding the core, the transformer literature also reports a large number of the calculation algorithms to compute losses originating from the magnetic flux density parallel to the laminations of the core [6, 52, 98].”
BackgroundDesign of Inductors With Significant AC Flux
Zhang, Z., Ngo, K. D. T., & Nilles, J. L. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2525729 · Cited by 36
“The modified Steinmetz equation [20] and improved generalized Steinmetz equation [21] have been proposed for nonsinusoidal excitation.”
MethodDesign of a permanent‐magnet flux‐modulated machine with a high torque density and high power factor
Vukotić, M., & Miljavec, D. (2015) · IET Electric Power Applications · doi:10.1049/iet-epa.2015.0143 · Cited by 30
Investigation of Energy Savings on Industrial Motor Drives Using Bidirectional Converters
Karatzaferis, I. C., Tatakis, E. C., & Papanikolaou, N. P. (2017) · IEEE Access · doi:10.1109/access.2017.2748621 · Cited by 30
“In various publications, different magnetic loss models for non-sinusoidal excited cores have been proposed [24]–[26].”
BackgroundMethodCalculation of Ferrite Core Losses with Arbitrary Waveforms using the Composite Waveform Hypothesis
Guillod, T., Lee, J. S., Li, H., Wang, S., Chen, M., & Sullivan, C. R. (2023) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43580.2023.10131348 · Cited by 30
“Multiple methods have been proposed to use limited data to predict losses for a wider variety of waveforms [4]–[6], [8], [10].”
BackgroundMethodInfluentialSelf-citationSimplified ferrite core loss separation model for switched mode power converter
Zhou, Y., & Ai‐ming, S. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2015.0146 · Cited by 30
Flux-Balancing Scheme for PD-Modulated Parallel-Interleaved Inverters
Gohil, G., Bede, L., Teodorescu, R., Kerekes, T., & Blaabjerg, F. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2589944 · Cited by 30
“The improved generalized Steinmetz equation [33], [34] is used to calculate the core losses of the CI and the core losses per unit volume are given as”
MethodMartinez, W. H., Cortes, C. A., Yamamoto, M., Imaoka, J., & Umetani, K. (2017) · IET Power Electronics · doi:10.1049/iet-pel.2017.0157 · Cited by 30
A Simplified Resonant Pole for Three-Level Soft-Switching PFC Rectifier Used in UPS
Rizet, C., Ferrieux, J.-P., Moigne, P. L., Delarue, P., & Lacarnoy, A. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2038392 · Cited by 30
“The ferrite core losses have been estimated by the improved generalized Steinmetz Equation computation [ 26 ].”
MethodInfluence of Non-Linearity in Losses Estimation of Magnetic Components for DC-DC Converters
Corti, F., Reatti, A., Lozito, G. M., Cardelli, E., & Laudani, A. (2021) · Energies · doi:10.3390/en14206498 · Cited by 29
“One of the most promising one is that based on the improved Generalized Steinmetz Equation (iGSE) [29,30].”
BackgroundMethodOverview of Planar Magnetics for High-frequency Resonant Converters
Liu, Y., Song, Y., Hu, D., Li, Y., Zhang, Z., & Wu, H. (2022) · Chinese Journal of Electrical Engineering · doi:10.23919/cjee.2022.000039 · Cited by 30
Ultra-fast charging station for electric vehicles with integrated split grid storage
Christen, D., Jauch, F., & Biela, J. (2015) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2015.7309322 · Cited by 35
Analytical modelling of winding capacitances and dielectric losses for planar transformers
Ackermann, B., Lewalter, A., & Waftenschmidt, E. (2006) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/cipe.2004.1428111 · Cited by 29
Costinett, D. J., Zane, R. A., & Maksimović, D. (2012) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2012.6165956 · Cited by 29
“Core Losses Core losses are calculated according to the Natural Steinmetz Equation [18,19] for both the tank inductance and transformer.”
MethodChattopadhyay, R., Gohil, G., Acharya, S., Viju Nair, R., & Bhattacharya, S. (2018) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2018.8341262 · Cited by 29
“Core Loss Modelling for Three Port Transformer The core loss model for three port transformer is derived here using iGSE method[13] as a function of operating phase shift angles φ1 and φ2.”
Method400–48-V Stacked Active Bridge Converter
Majmunović, B., & Maksimović, D. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3160413 · Cited by 28
“The core loss is estimated using the improved generalized Steinmetz equation (iGSE) [26].”
MethodA Core Loss Calculation Method for DC/DC Power Converters Based on Sinusoidal Losses
Zhou, Y., Weibo, Z., & Guanghui, T. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3199041 · Cited by 28
“3199041 improved GSE in [5], the improved–improved GSE in [31], and the latest proposed ISE can predict core losses under any duty cycle and any frequency [10].”
BackgroundKlein‐Hessling, A., Hofmann, A., & Doncker, R. W. D. (2015) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2015.7409171 · Cited by 28
“The simulation methodology from [8] and [9] has been applied.”
MethodMagnetic equivalent circuit of MF transformers: modeling and parameter uncertainties
Guillod, T., Krismer, F., & Kolar, J. W. (2018) · Electrical Engineering · doi:10.1007/s00202-018-0701-0 · Cited by 28
“, due to hysteresis and eddy current losses) [6,10].”
BackgroundDesign and Optimization of InterCell Transformers for Parallel MultiCell Converters
Cougo, B. (2010) · theses.fr (ABES) · doi:10.70675/00a6388fz1a81z4761z9ff5z8ac1d09853c7 · Cited by 47
“Reference [100] shows good agreement between core losses calculated by iGSE and measured ones, for nonsinusoidal flux density.”
Desynchronizing Paralleled GaN HEMTs to Reduce Light-Load Switching Loss
Shen, Y., Shillaber, L., Zhao, H. L., Jiang, Y., & Long, T. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2970240 · Cited by 28
“Based on the analysis in Section III-B, we can obtain the time delays [35], [56], [57] TCM multiphase interleaving [43]–[45] Proposed desynchronizable paralleling scheme”
MethodShahzad, D., Farooq, M., Pervaiz, S., & Afridi, K. K. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3151910 · Cited by 29
Zhao, Z., Wu, Y., Diao, F. M., Lin, N., Du, X., Zhao, Y., & Zhu, G. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3161870 · Cited by 27
High-Frequency Core Loss Modeling Based on Knowledge-Aware Artificial Neural Network
Deng, J., Wang, W., Ning, Z., Venugopal, P., Popović, J., & Rietveld, G. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3332025 · Cited by 27
“There are several key features, such as frequency and peak flux density, which have significant influences on the core loss [1], [12], [13].”
BackgroundMethodInfluentialIshraq, N., & Mallik, A. (2024) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2024.3359479 · Cited by 28
“A general form of the core loss can be determined from the improved Generalized Steinmetz equation [26] and expressed as follows, which is used in this design for inductor core loss formulation. where α , β and k are Steinmetz coefficients given by the inductor manufacturer datasheet.”
MethodLoss Analysis of Magnetic Components for a Solid-State-Transformer
Nakahara, M., & Wãda, K. (2015) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.4.387 · Cited by 27
Modification of empirical core loss calculation methods including flux distribution
Agheb, E., & Høidalen, H. K. (2013) · IET Electric Power Applications · doi:10.1049/iet-epa.2012.0368 · Cited by 27
Optimal Design of a 3.5-kV/11-kW DC–DC Converter for Charging Capacitor Banks of Power Modulators
Ortiz, G., Bortis, D., Biela, J., & Kolar, J. W. (2010) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2009.2038162 · Cited by 27
“The core losses are calculated by using the Steinmetz equation for nonsinusoidal waveforms [6], whereas the Steinmetz parameters are extracted from the core manufacturer’s datasheets.”
MethodUltraefficient Voltage Doubler Based on a GaN Resonant Switched-Capacitor Converter
Vasić, M., Serrano, D., Toral, V., Alou, P., Oliver, J. A., & Cobos, J. A. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2899180 · Cited by 27
da Silva, R. L., Borges, V. L. F., Possamai, C. E., & Barbi, I. (2020) · IEEE Access · doi:10.1109/access.2020.3013188 · Cited by 28
“In the MFT transformer, the core and winding losses were determined using the methods presented in [57] and [58], respectively.”
MethodImproved ZVS Range for Three-Phase Dual-Active-Bridge Converter With Wye-Extended-Delta Transformer
Cúnico, L. M., & Kirsten, A. L. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3102482 · Cited by 27
“The magnetic core losses of the inductor and the transformer are evaluated using the improved generalized Steinmetz equation method as presented in [21].”
MethodSantra, S. B., Chatterjee, A., Chatterjee, D., Padmanaban, S., & Bhattacharya, K. (2022) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2022.3146212 · Cited by 26
Magnetic Integration for Parallel Interleaved VSCs Connected in a Whiffletree Configuration
Gohil, G., Bede, L., Teodorescu, R., Kerekes, T., & Blaabjerg, F. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2514182 · Cited by 29
“2) Losses Comparison: The improved generalized Steinmetz equation [21], [22] is used to calculate the core losses.”
MethodTopologies and Control Strategies of Very High Frequency Converters: A Survey
Xu, D. (2017) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2017.00004 · Cited by 26
“Although the VHF system has such merits, the high switching frequency puts forward strict requirements on the selection of semiconductor devices [21]-[28], the utilization of parasitic parameters [29]-[36], the design of the circuit [37]-[42] and the design of passive components [43]-[49].”
BackgroundRGSE-Based SPICE Model of Ferrite Core Losses
Abramovitz, A., & Ben‐Yaakov, S. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2762759 · Cited by 26
“Among these advanced models are the modified Steinmetz equation (MSE) [10], the generalized Steinmetz equation (GSE) [11], the improved generalized Steinmetz equation (iGSE) [12], the extended Steinmetz equation [13], the improved–improved Steinmetz equation [14] and as well as some others.”
BackgroundCore Loss Estimation in Electric Machines With Flux-Controlled Core Loss Tester
Tekgün, B., Sozer, Y., Tsukerman, I., Parag, U., & Englebretson, S. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2018.2874352 · Cited by 26
“proved GSE (iGSE) [11], and the natural Steinmetz equation (NSE) [12].”
BackgroundModelling and Design of a Medium Frequency Transformer for High Power DC-DC Converters
Stojadinović, M., & Biela, J. (2018) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec.2018.8507864 · Cited by 27
“2) Core Losses: For calculating the transformer core losses the Improved Generalized Steinmetz Equation (iGSE), presented in [25], is used.”
MethodPower Inductors Behavioral Modeling Revisited
Stoyka, K., Femia, N., & Capua, G. D. (2020) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2020.3002615 · Cited by 26
“The resulting AC power loss model [17] differs from the Steinmetz-based formulas [18]–[22] typically adopted by”
MethodUemura, H., Krismer, F., Okuma, Y., & Kolar, J. W. (2014) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2014.6870083 · Cited by 26
“The core losses are calculated based on the improved General ized Steinmetz Equations (iGSE) [15].”
MethodSmołka, J., Ingham, D. B., Elliott, L. N., & Nowak, A. J. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.05.008 · Cited by 26
Medium Voltage AC-DC Converter Systems for Ultra-Fast Charging Stations for Electric Vehicles
Jauch, F. (2016) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-a-010610239 · Cited by 35
Analytical Loss Model for Magnetic Cores Based on Vector Magnetic Circuit Theory
Li, C., Cheng, M., Qin, W., Wang, Z., Ma, X., & Wang, W. (2024) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2024.3476166 · Cited by 25
“The Steinmetz equation-based methods, due to its few parameters and simplicity, are convenient for industrial applications [13], [14], [15], [16], [17].”
MethodKirchgässner, W., Förster, N., Piepenbrock, T., Schweins, O., & Wallscheid, O. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3488174 · Cited by 25
A high-efficient LLCC series-parallel resonant converter
Dick, C., Titiz, F. K., & Doncker, R. W. D. (2010) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2010.5433594 · Cited by 25
“For gaining maximum efficiency the frequency dependent loss mechanisms quantified based on different loss models like the Improved Generalized Steinmetz Equation [13].”
MethodNonlinear Lumped-Circuit Model for Switched Reluctance Motors Exhibiting Core Losses
Perez-Cebolla, F. J., Martínez, A., Martín-del-Brío, B., Bernal, C., & Bono-Nuez, A. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2523925 · Cited by 25
Core Loss Modeling and Calculation for Trapezoidal Magnetic Flux Density Waveform
Barg, S., & Bertilsson, K. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.3013750 · Cited by 25
Medium Voltage Converter Inductor Insulation Design Considering Grid Requirements
Li, H., Yao, P., Gao, Z., & Wang, F. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3131602 · Cited by 25
“The core loss is calculated using the iGSE method [11], and the winding loss includes both the dc resistance and ac resistance losses [12].”
MethodHaneda, R., & Akagi, H. (2021) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2021.3129728 · Cited by 25
Single-phase vs. three-phase high density power transformers
Xue, J., Wang, F., Boroyevich, D., & Shen, Z. (2010) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2010.5618452 · Cited by 25
“Constant kwave here stands for the waveform coefficient of the core loss according to [14, 15].”
BackgroundMethodOptimal Transformer Design for Ultraprecise Solid State Modulators
Blume, S., & Biela, J. (2013) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2013.2280429 · Cited by 25
“by the improved generalized Steinmetz equation (iGSE) [14].”
A Field-Extrema Hysteresis Loss Model for High-Frequency Ferrimagnetic Materials
Cale, J., Sudhoff, S. D., & Chan, R. R. (2008) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2008.921489 · Cited by 25
“However, it is reported in [9], [11], and [16] that the Steinmetz parameters vary with frequency.”
BackgroundMethodInfluentialVillar, I., Rufer, A. C., Viscarret, U., Zurkinden, F., & Etxeberria‐Otadui, I. (2008) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2008.4677156 · Cited by 25
“To overcome this fact the improved generalized Steinmetz equation [ 13 ] replaced the instantaneous value of the magnetic induction with its peak to peak value (8).”
BackgroundNgo, M., Cao, Y., Dong, D., & Burgos, R. P. (2021) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec42165.2021.9487443 · Cited by 25
Modeling and Design of Vertical Multiphase Coupled Inductors with Inductance Dual Model
Elasser, Y., Baek, J.-I., Sullivan, C. R., & Chen, M. (2021) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec42165.2021.9487344 · Cited by 24
“The “Generalized Steinmetz Equation” first presented in [32] and later improved in [33] (termed the “improved Generalized Steinmetz Equation,” or iGSE) are used to predict the core loss.”
MethodSelf-citationEstimation of power losses in a high-frequency planar transformer using a thermal camera
Barlik, R., Mieczysław, N., Grzejszczak, P., & Zdanowski, M. (2016) · Archives of Electrical Engineering · doi:10.1515/aee-2016-0044 · Cited by 25
“The authors assumed that with a good knowledge of the construction of the transformer, including the geometric arrangement of the coils, core material and dimensions, the power loss calculation results based on the Steinmetz and Dowell models were relatively accurate, [11] [18-21].”
MethodEverts, J. (2016) · Energies · doi:10.3390/en9100799 · Cited by 26
Highly Efficient EV Battery Charger Using Fractional Charging Concept with SiC Devices
Kanstad, T., Lillholm, M. B., & Zhang, Z. (2019) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2019.8722191 · Cited by 24
“Primary side winding loss I2 Tp rmsRp Secondary side winding loss I2 Ts rmsRs Transformer core loss (iGSE [14]) 1 T ∫ T 0 ki| dB dt |α(∆Bβ−α)dt, ki = k (2π)α−1 ∫ 2π 0 |cos(θ)|α·2β−αdθ”
Jauch, F., & Biela, J. (2015) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.4.593 · Cited by 27
Jacoboski, M. J., Lange, A. D. B., & Heldwein, M. L. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2775106 · Cited by 24
“The definitions of rising and falling portions and major and minor loops are introduced in [3].”
BackgroundMethodInfluentialvan Hoek, H. (2016) · RWTH Publications (RWTH Aachen) · doi:10.18154/rwth-2017-02955 · Cited by 39
“The iGSE gives a more accurate results for non-sinusoidal waveforms than the MSE and the GSE [127].”
MethodMagnetization Mechanism-Inspired Neural Networks for Core Loss Estimation
Huang, Q., Li, Y., Zhu, J. G., & Li, S. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3450897 · Cited by 23
“Steinmetzempiricalmodelsaresomeofthemost widelyusedmodelsinthefieldofpowerelectronics,whichmap therelationshipbetweenexcitationandcorelossesthroughafew curve-fittingparameters[3],[4],[5],[6].”
Hilal, A., & Cougo, B. (2016) · IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC) · doi:10.1109/esars-itec.2016.7841359 · Cited by 27
“These modified versions of the SE include MSE [7], GSE [8], iGSE [9], and i2GSE [10].”
MethodEffects of High-frequency Operation on Magnetic Components in Power Converters
Imaoka, J., Wu, Y.-H., Shigematsu, K., Aoki, T., Noah, M., & Yamamoto, M. (2021) · IEEE ECCE Asia Downunder · doi:10.1109/ecce-asia49820.2021.9479365 · Cited by 23
Chen, H., Ouyang, S., Liu, J., & Li, X. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3192781 · Cited by 25
“The core losses of transformer can be approximately calculated by the improved generalized Steinmetz’s equation [31], [32]”
MethodJin, H., Pei, Y., Wang, L., Wen, J., Yang, C., & Dong, X. (2023) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3232662 · Cited by 24
A High Efficiency Δ-Lr-Y Type Three-Phase Interleaved LLC Converter With Less Transformer Loss
Guan, J., Wu, Z., Liu, T., Wen, J., Xu, W., Chen, C., & Kang, Y. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3283391 · Cited by 23
“2) Core loss: The improvements generalized Steinmetz equation (iGSE) [31] is different from the traditional Steinmetz equation, which only considers the flux peak value; it considers not only the flux peak value but also the slope and time of flux change.”
Hofmann, M., & Herzog, H. (2014) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2014.2353579 · Cited by 23
PCB embedded inductor for high-frequency ZVS SEPIC converter
Dou, Y., Ouyang, Z., Thummala, P., & Andersen, M. A. E. (2018) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2018.8340994 · Cited by 23
“Core loss can be computed using IGSE method [13].”
MethodDesign of an Highly Efficient AC-DC-AC Three-Phase Converter Using SiC for UPS Applications
Alves, W. C., Morais, L. M. F., & Cortizo, P. C. (2018) · Electronics · doi:10.3390/electronics7120425 · Cited by 23
Generalized Dynamic Hysteresis Model for Improved Iron Loss Estimation of Complex Flux Waveforms
Chang, L., Jahns, T. M., & Blissenbach, R. (2019) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2018.2889239 · Cited by 23
“In addition, rather than linearly decompose the complex flux waveforms using the Fourier analysis, the waveform can be segregated into its major and minor loop components [10], [11] as shown in Fig.”
MethodDesign of a Magnetic Gear for NASA's Vertical Lift Quadrotor Concept Vehicle
Tallerico, T., Cameron, Z. A., & Scheidler, J. J. (2019) · AIAA Propulsion and Energy Forum · doi:10.2514/6.2019-4477 · Cited by 23
At What Frequencies Should Air-Core Magnetics Be Used?
Solomentsev, M., & Hanson, A. J. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3222993 · Cited by 22
“3222993 modeled using the Steinmetz equation, Pv = kfB β ac, where f is the operating frequency, Bac is the ac amplitude of the B field excitation, and k, α, and β are constant material properties [1], [2], [3].”
MethodPaul, S., & Basu, K. (2024) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2024.3395973 · Cited by 22
Schroeder, J. C., & Fuchs, F. W. (2012) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342743 · Cited by 22
“Thus, the improved GSE (iGSE) is deduced and experimentally verified in [17].”
BackgroundModel predictive overload control of induction motors
Qi, F., Stippich, A., Koschik, S. A., & Doncker, R. W. D. (2015) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2015.7409183 · Cited by 22
“For this case, there exist more sophisticated methods [10].”
MethodHu, J., Yang, Z., Soltau, N., & Doncker, R. W. D. (2017) · IEEE International Future Energy Electronics Conference (IFEEC) · doi:10.1109/ifeec.2017.7992154 · Cited by 22
“The transformer core loss is calculated with the improved generalized Steinmetz’s equation (iGSE) [9], while the transformer winding loss considering the skin effect and proximity effect is estimated by the Dowell’s equation [10].”
MethodAnalysis and experimental verification of a multi‐input converter for DC microgrid applications
Akar, F., Tavlasoglu, Y., & Vural, B. (2018) · IET Power Electronics · doi:10.1049/iet-pel.2017.0456 · Cited by 22
Ishikura, Y., Imaoka, J., Noah, M., & Yamamoto, M. (2018) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec.2018.8508012 · Cited by 22
“Measuring the actual value of the core loss in these materials is essential, to ensure an optimum thermal design for the passive component [7]-[10].”
BackgroundMethodInfluentialSon, Y., Mukherjee, S., Mallik, R., Majmunović, B., Dutta, S., Johnson, B., Maksimović, D., & Seo, G. (2022) · IEEE Access · doi:10.1109/access.2022.3157332 · Cited by 23
Parallel interleaved VSCs: Influence of the PWM scheme on the design of the coupled inductor
Gohil, G., Bede, L., Maheshwari, R., Teodorescu, R., Kerekes, T., & Blaabjerg, F. (2014) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2014.7048730 · Cited by 21
“The Improved Generalized Steinmetz Equation (IGSE) [20], [21] is used to calculate the core losses, and the core losses per unit volume is given as”
MethodD’Antonio, M., Chakraborty, S., & Khaligh, A. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9235668 · Cited by 23
Overall Efficiency Improvement of a Dual Active Bridge Converter Based on Triple Phase-Shift Control
Jean-Pierre, G., Altın, N., Shafei, A. E., & Nasiri, A. (2022) · Energies · doi:10.3390/en15196933 · Cited by 21
“Due to the non-sinusoidal waveform characteristic for the given applications, the improved generalized Steimetz Equation [40] is used to obtain the closed-form expression for the core loss.”
MethodErickson, R. W., & Maksimović, D. (2001) · Springer eBooks · doi:10.1007/0-306-48048-4_13 · Cited by 21
Active Source Current Filtering to Minimize the DC-Link Capacitor in Switched Reluctance Drives
Klein‐Hessling, A., Burkhart, B., & Doncker, R. W. D. (2019) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2019.00007 · Cited by 21
An Improved Design Method for Gapped Inductors Considering Fringing Effect
Yang, Z., Suryanarayana, H., & Wang, F. (2019) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2019.8721811 · Cited by 21
Comparison of an optimized electrical variable transmission with the Toyota Hybrid System
Verbelen, F., Lhomme, W., Vinot, E., Stuyts, J., Vafaeipour, M., Hegazy, O., Stockman, K., & Sergeant, P. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115616 · Cited by 21
Metadata
- Authors
- Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H.
- Affiliations
- Dartmouth College (US)
- Universidad de Buenos Aires (AR)
- Venue
- 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings.
- Publisher
- IEEE
- Published
- 2003-06-26
- Pages
- 36-41
- ISSN
- 2151-0997 (ISSN-L)
- OpenAlex
- W2109185194
- Cited by
- 1,145
- References
- 23
- Citations by year
- 2026: 49 · 2025: 76 · 2024: 105 · 2023: 82 · 2022: 99 · 2021: 85 · 2020: 104 · 2019: 86 · 2018: 66 · 2017: 67 · 2016: 57 · 2015: 45 · 2014: 47 · 2013: 40 · 2012: 33
- FWCI
- 5.50
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE ... Workshop on Control and Modeling for Power Electronics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Magnetic Properties and Synthesis of Ferrites
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Keywords
- non-sinusoidal waveforms, hysteresis loss, recursive algorithm, magnetic materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.