Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
An improved calculation of ferrite core loss for nonsinusoidal waveforms separates a flux trajectory into major and minor loops via a new recursive algorithm. It is highly accurate and outperforms two previous methods for our measured data. The only characteristics of the material required are the standard Steinmetz-equation parameters.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
General properties of power losses in soft ferromagnetic materials
Bertotti, G. (1988) · IEEE Transactions on Magnetics · doi:10.1109/20.43994 · Cited by 2,162 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Mathematical models of hysteresis
Mayergoyz, I. (1986) · IEEE Transactions on Magnetics · doi:10.1109/tmag.1986.1064347 · Cited by 1,166
[Mathematical models of hysteresis]
Mayergoyz, I. D. (1991) · doi:10.2172/6911694 · Cited by 708
Soft Ferrites—Properties and Applications
Brailsford, F. (1970) · Electronics and Power · doi:10.1049/ep.1970.0192 · Cited by 613
Improved calculation of core loss with nonsinusoidal waveforms
Li, J., Abdallah, T., & Sullivan, C. R. (2002) · Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248) · doi:10.1109/ias.2001.955931 · Cited by 531 · cited 10×
“In [6], the MSE and GSE are compared with experimental data, and while both provide a vastly better approximation than the basic Steinmetz equation (1), and the GSE avoids some problems exhibited in the MSE, each has significant error in at least one region.”
BackgroundMethodResultInfluentialSelf-citation(1998) · doi:10.1016/b978-0-12-093270-2.x5048-x · Cited by 487
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation
Reinert, J., Brockmeyer, A., & De Doncker, R. W. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.806023 · Cited by 409 · cited 4×
“The consideration of these Axioms 1 and 2 allows one to see that the MSE [5] and the model in [20] cannot be expected to work well for truly general consideration of many different possible waveforms; the problems with the MSE were confirmed experimentally in [5].”
BackgroundMethodInfluentialSteinmetz, C. P. (1892) · Transactions of the American Institute of Electrical Engineers · doi:10.1109/t-aiee.1892.5570437 · Cited by 407 · cited 1×
“A similar equation, but without the frequency dependence, was proposed by Steinmetz in 1892 [3], and so (1) is often referred to as the Steinmetz equation.”
BackgroundAn improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform
Fiorillo, F., & Novikov, A. (1990) · IEEE Transactions on Magnetics · doi:10.1109/20.104905 · Cited by 382 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Albach, M., Durbaum, T., & Brockmeyer, A. (2002) · PESC Record. 27th Annual IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1996.548774 · Cited by 225
Research works printed but not linked: 4
- vorperian, 2002, Using fractals to model eddy-current losses in ferromagnetic materials, Switching power Magazine, 3, 18
- mulder, 1995, Power ferrite loss formulas for transformer design, Powerconversion and Intelligent Motion, 21, 22
- 2000, MATLAB Version 6
- ridley, 2002, Modeling ferrite core losses, Switching power Magazine, 3, 6
Cited by
Items 401–500 of 1,000
Calculation of core losses in magnetic materials under nonsinusoidal excitation
Marín-Hurtado, A. J., Rave-Restrepo, S., & Mejía, A. E. (2016) · IEEE International Power Electronics Congress (CIEP) · doi:10.1109/ciep.2016.7530736 · Cited by 17
“Errors around 44.52%, 7.27% and 59.40%, were found between the iGSE method and data from measurements when the duty cycle is 100% at 20 kHz for amorphous, ferrite and nanocrystalline respectively.”
MethodInfluentialPower Density and Efficiency Enhancement in ICN DC–DC Converters Using Topology Morphing Control
Kumar, A., Lü, J., & Afridi, K. K. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2832176 · Cited by 14
“Here, the transformer core losses are evaluated using the more accurate improved generalized Steinmetz equation (iGSE) [29].”
MethodA Multicell Cascaded High-Frequency Link Inverter With Soft Switching and Isolation
Moosavi, M., & Toliyat, H. A. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2844790 · Cited by 14
Design Optimization of Power Electronic Transformers in Traction Applications
Chowdhury, S. K., Kobayashi, H., & Kondo, K. (2020) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.20002062 · Cited by 14
Zhu, S., Han, W., Chen, J., & Liu, Q. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3292897 · Cited by 13
Ren, X., Zhang, J., Jiang, Y., Li, X., & Long, T. (2023) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel52896.2023.10221067 · Cited by 13
“We then use the iGSE equation to calculate the core loss excited by a square voltage waveform [12].”
MethodMahdavifard, M., & Khajehoddin, S. A. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3367279 · Cited by 13
“The calculation of this loss is performed using the improved generalized Steinmetz equation (iGSE) as follows [29]: where α , β , and k represent the Steinmetz parameters derived from the material characteristics, and P v denotes the time-average power loss per unit volume.”
MethodAn Empirical Model Informed Neural Network Core Loss Predictor for Soft Magnetic Materials
Rajput, N., Sandhibigraha, H. B., Agrawal, N., & Iyer, V. M. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3557218 · Cited by 13
“Further enhancements led to the generalized Steinmetz equation (GSE) [8] and improved generalized Steinmetz equation (iGSE) [9], accounting for instantaneous magnetic flux density and peak-to-peak magnetic flux density, respectively.”
Design of a high efficiency 30 kW boost composite converter
Kim, H., Chen, H., Maksimović, D., & Erickson, R. W. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310259 · Cited by 16
“Core loss is calculated according to the iGSE method [12] for both inductors and transformers.”
MethodLoss Reduction of Laminated Core Inductor used in On-board Charger for EVs
Tera, T., Taki, H., & Shimizu, T. (2015) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.4.626 · Cited by 13
Comparison of planar and Toroidal PCB integrated inductors for a multi-cellular 3.3 kW PFC
Caillaud, R., Buttay, C., Mrad, R., Leslé, J. L., Morel, F., Degrenne, N., & Mollov, S. V. (2017) · IEEE International Workshop on Integrated Power Packaging (IWIPP) · doi:10.1109/iwipp.2017.7936757 · Cited by 13
“The last three properties are the Steinmetz coefficients (k, α, β) used to calculate the core losses [8].”
MethodDelhommais, M., Schanen, J., Würtz, F., Rigaud, C., & Chardon, S. (2018) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2018.8341128 · Cited by 13
“Then the core losses are evaluated with IGSE [9].”
MethodLiu, Y., Kumar, A. R., Maksimović, D., & Afridi, K. K. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8557949 · Cited by 13
“The inductor winding losses are estimated using the Maxwellobtained dc and ac winding resistances, and core losses are estimated using the improved Generalized Steinmetz Equation (iGSE) [11].”
MethodThermal Modelling of Planar Transformers Considering Internal Power Loss Distribution
Shen, Z., Shen, Y., & Wang, H. (2019) · IEEE International Future Energy Electronics Conference (IFEEC) · doi:10.1109/ifeec47410.2019.9015030 · Cited by 13
“The well accepted IGSE can predict the winding losses in arbitrary waveform: 0 1 d ( ) ( ) d T b a s i B tP k B t T dt (2) 21 0 (2 ) cos( ) 2 d i b a Kk (3) where k, a, b are inherent characters of the material, usually provided by the manufacturer, Bm is the flux density, θ is the phase angle.”
MethodVf ‐constrained ηρ ‐pareto optimisation of medium frequency transformers in ISOP‐DAB converters
Beiranvand, H., Rokrok, E., & Liserre, M. (2020) · IET Power Electronics · doi:10.1049/iet-pel.2019.1159 · Cited by 14
“Later in [23], OSE formula is extended to non-sinusoidal flux density waveform by improved generalised Steinmetz equation formula.”
MethodVoldoire, A., Schanen, J., Ferrieux, J.-P., Derbey, A., & Gautier, C. (2020) · Electronics · doi:10.3390/electronics9091393 · Cited by 14
“This induction ripple is used i the iGSE (improved Generalized Steinmetz Equation) model [24] to compute ir losses (Equation (8)).”
MethodModified Preisach Model of Hysteresis in Multi Air Gap Ferrite Core Medium Frequency Transformer
Michna, M., Dworakowski, P., Wilk, A., Kutt, F., & Mermet-Guyennet, M. (2021) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2021.3054059 · Cited by 13
Predesign Methodology of Voltage Inverters Using a Gradient-Based Optimization Algorithm
Voldoire, A., Schanen, J., Ferrieux, J.-P., Sarrazin, B., & Gautier, C. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3092576 · Cited by 14
A High-Frequency Planar Transformer with Medium-Voltage Isolation
Mukherjee, S., Majmunović, B., Seo, G., Dutta, S., Mallik, R., Johnson, B., & Maksimović, D. (2021) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec42165.2021.9487061 · Cited by 13
“Assuming quasi steady-state operation at each point along the line cycle, the core loss is estimated following the iGSE method [11], and the ac winding losses are computed using Dowell’s equations [12] for up to the 11th harmonic of the transformer currents.”
MethodThummala, P., Schneider, H., Ouyang, Z., Zhang, Z., & Andersen, M. A. E. (2013) · IEEE ECCE Asia Downunder · doi:10.1109/ecce-asia.2013.6579178 · Cited by 13
Dual Converter Fed Open-End Transformer Topology with Parallel Converters and Integrated Magnetics
Gohil, G., Bede, L., Teodorescu, R., Kerekes, T., & Blaabjerg, F. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2548999 · Cited by 13
Comparative Evaluation of Bidirectional Dual Active Bridge DC-DC Converter Variants
Sfakianakis, G. E., Everts, J., Huisman, H., & Lomonova, E. A. (2016) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2016.7791631 · Cited by 13
“The core losses per unit volume (index ”V”) are calculated with the Steinmetz parameters k, α, β using the improved Generalized Steinmetz Equation (iGSE) [15]:”
MethodA high-power-density low-profile DC-DC converter for cellphone battery charging applications
Liu, Y., Kumar, A. R., Pervaiz, S., Maksimović, D., & Afridi, K. K. (2017) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2017.8013362 · Cited by 13
“The inductor core losses are computed using the iGSE method [16].”
MethodMagnetic Circuit Design for Power Electronics
Hurley, W. G., Duffy, M. C., Acero, J., Ouyang, Z., & Zhang, J. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-811407-0.00019-2 · Cited by 14
Bramerdorfer, G., Kitzberger, M., Wöckinger, D., Koprivica, B. M., & Zurek, S. (2019) · tm - Technisches Messen · doi:10.1515/teme-2019-0066 · Cited by 13
“For instance, the Improved Generalized Steinmetz equations (iGSE, [60]) or the Natural Steinmetz equation (NSE, [59]) were presented in the past.”
BackgroundSato, Y., Kawano, K., Hou, D., Morroni, J., & Igarashi, H. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2968749 · Cited by 13
Advanced approach for static part of loss-surface iron loss model
Messal, O., Vo, A.-T., Fassenet, M., Mas, P., Buffat, S., & Kedous‐Lebouc, A. (2020) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2020.166401 · Cited by 13
Choi, H.-J., Seo, B.-G., Ryu, M.-H., Cho, Y., & Jung, J. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2972462 · Cited by 13
“The magnetic core loss of the transformer and the inductor can be calculated using the Steinmetz–formula as follows [18]:”
MethodMagnetic Stimulation of Neural Tissue: Techniques and System Design
Basham, E. J., Yang, Z., Tchemodanov, N., & Liu, W. (2009) · Biological and medical physics series · doi:10.1007/978-0-387-77261-5_10 · Cited by 15
Wyss, J., & Biela, J. (2015) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2015.7309205 · Cited by 13
“For the core losses, the improved generalized Steinmetz equations from [12] are used.”
MethodNovel isolated cascaded half-bridge converter for battery energy storage systems
Jauch, F., & Biela, J. (2014) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2014.6910833 · Cited by 14
“In the loss model, the core losses per volume are calculated by applying the improved Generalized Steinmetz Equation (iGSE) [20].”
MethodSathler, H. H., Sathler, L. H., Marcelino, F. L. F., de Oliveira, T. R., Seleme, S. I., & Garcia, P. F. D. (2017) · Brazilian Power Electronics Conference (COBEP) · doi:10.1109/cobep.2017.8257219 · Cited by 13
“In contrast, the mean core losses are estimated from [15, 16], which represents an optimization from what is proposed in [17].”
BackgroundResultInfluentialContinuous Time Formulation for Magnetic Relaxation Using the Steinmetz Equation
do Nascimento, V. C., & Sudhoff, S. D. (2018) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2018.2821599 · Cited by 13
“This revision is known as the improved Generalized Steinmetz equation (iGSE) [19], which may be expressed as”
BackgroundHigh Frequency Transformer Design for Medium Voltage Shipboard DC-DC Converter
Agarwal, R., Martin, S., Shi, Y., & Li, H. (2019) · 2019 IEEE Electric Ship Technologies Symposium (ESTS) · doi:10.1109/ests.2019.8847922 · Cited by 12
Xia, N., Chen, M., Mao, X., Yan, S., & Ma, H. (2024) · Journal of Power Electronics · doi:10.1007/s43236-024-00814-4 · Cited by 12
Queiroz, S. S., & Costa, L. F. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3583941 · Cited by 12
“First, the core loss P loss ,c is estimated using the improved generalized Steinmetz equation [27].”
Pinne, J., Gruber, A., Rigbers, K., Sawadski, E., & Napierala, T. (2012) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342224 · Cited by 12
High speed electric machines — Challenges and design considerations
Li, S., Li, Y., Choi, W., & Sarlioglu, B. (2014) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2014.6960546 · Cited by 12
Optimal sizing of a power electronic traction transformer for railway applications
Stackler, C., Morel, F., Ladoux, P., Fouineau, A., Wallart, F., & Evans, N. (2018) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2018.8591686 · Cited by 13
A Medium Frequency Transformer Design Tool with Methodologies Adapted to Various Structures
Fouineau, A., Guillet, M., Lefebvre, B., Raulet, M., & Sixdenier, F. (2020) · International Conference on Ecological Vehicles and Renewable Energies (EVER) · doi:10.1109/ever48776.2020.9243104 · Cited by 14
“It appears that IGSE (Improved generalized Steinmetz Equation) [24] is one of the best performing model, and it can be applied to any waveform.”
Lumped Parameter Thermal Network Modelling of Power Transformers
Dey, A., Shafiei, N., Khandekhar, R., Eberle, W., & Li, R. (2021) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm51669.2021.9503171 · Cited by 14
Concept Design of a 1.4 MW Drive for Rotor Loss Minimization in a Partially Superconducting Motor
Granger, M. G., Tallerico, T., Anderson, A. D., Scheidler, J. J., Kascak, P. E., Leary, A., & Jansen, R. (2022) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec53557.2022.9813861 · Cited by 12
Zhao, X.-J., Liu, Y., Wang, R., Huang, K. R., Zhou, L., & Dong, L. (2022) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2022.3197101 · Cited by 12
“Since then, many scholars have improved the Steinmetz formula for loss modeling under harmonic magnetization [10], [11].”
BackgroundParameter Design Optimization for DC-DC Power Converters with Deep Reinforcement Learning
Tian, F., Cobaleda, D. B., Wouters, H., & Martinez, W. H. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9948201 · Cited by 12
“This paper adopts the improved generalized Steinmetz equation (iGSE) [11], shown in equation (8).”
MethodEMI noise attenuation prediction with mask impedance in motor drive system
Wang, R., Blanchette, H. F., Boroyevich, D., & Mattavelli, P. (2012) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2012.6166140 · Cited by 12
“It contains four components; namely, the load impedance (ZL), the filter impedance, the noise source (Vnoise) and the source impedance (Zs) [8-9].”
BackgroundNakahara, M., & Wãda, K. (2014) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2014.6869942 · Cited by 12
Testing Core Loss for Rectangular Waveforms, Phase II Final Report
Sullivan, C. R., & Harris, J. H. (2011) · Cited by 12
Self-citationDelhommais, M., Schanen, J., Würtz, F., Rigaud, C., & Chardon, S. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8096629 · Cited by 12
“With its geometry and Improved General Steinmetz Equations (IGSE) [13], core losses are obtained.”
BackgroundDesign of a multi-winding high-frequency transformer for DC-DC applications
Liang, Y. C., Wang, Z., Wu, H., Wang, C., & Li, X. (2017) · IEEE Conference on Energy Internet and Energy System Integration (EI2) · doi:10.1109/ei2.2017.8245507 · Cited by 12
Core loss evaluation of high-frequency transformers in high-power DC-DC converters
Bahmani, A. (2018) · International Conference on Ecological Vehicles and Renewable Energies (EVER) · doi:10.1109/ever.2018.8362341 · Cited by 12
“Taking this assumption into account, the generalized Steinmetz equation (GSE) was presented as Pc = 1 T ∫ T 0 kki ∣∣∣∣dB(t)dt ∣∣∣∣ α |B(t)|β−α dt (23) where ki = 1 (2π)α−1 ∫ 2π 0 |cos(θ)|α |sin(θ)|β−α dθ (24) 4) IGSE: The other commonly used expression for core loss calculations is known as the improved generalized St…”
MethodInfluentialDworakowski, P., Wilk, A., Michna, M., Fouineau, A., & Guillet, M. (2020) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2020.2995879 · Cited by 12
“The analytical formula for core power loss with non-sinusoidal excitations was proposed in [50] based on [51].”
MethodIshikura, Y., Imaoka, J., Noah, M., Aoki, T., Ito, K., & Yamamoto, M. (2020) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2020.3014592 · Cited by 12
“2 and improved generalized Steinmetz equation (iGSE) [23], [24].”
BackgroundHurley, W. G., & Wolfle, W. H. (2013) · Wiley eBooks · doi:10.1002/9781118544648.ch3 · Cited by 12
Kim, D., Chin, J., Hong, J., & Lim, M. (2019) · IET Electric Power Applications · doi:10.1049/iet-epa.2018.5382 · Cited by 12
“In order to calculate the iron loss exactly, it is necessary to measure the iron loss using the current waveform including harmonics [21, 22].”
MethodA GaN based Dual Active Bridge Converter for Energy Storage Systems
Hassan, H. A., Iuravin, E., Cai, H., & Scott, M. J. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8558124 · Cited by 13
“However, IGSE copes better with a wider variety of voltage waveforms.”
MethodDas, A. K., & Fernandes, B. G. (2023) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2023.3306743 · Cited by 12
“…and allows calculation of the core loss in the time domain for arbitrary waveforms of flux), 2) Improved Generalized Steinmetz Equation (IGSE) [64] (this separates the flux trajectory into major and minor loops using a recursive algorithm and accurately predicts core loss for nonsinuodal…”
MethodSchäfer, J., Rohner, G., & Kolar, J. W. (2024) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2024.3515798 · Cited by 11
“With the advent of switch-mode power supplies, the GSE was extended to be applicable to non-sinusoidal excitations, resulting in the modified Steinmetz equation (MSE) [3] and in a next step in the improved GSE (iGSE) [4].”
Yavaşoğlu, H. A., Shani, B., Hasnain, A., Parlak, B. O., & Khaligh, A. (2025) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2025.3600891 · Cited by 11
High-speed switched reluctance drives: A promising alternative to power electric vehicles
Hofmann, A. G., Kasper, K. A., & Doncker, R. W. D. (2011) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.1109/icpe.2011.5944571 · Cited by 11
Jafari, M., Malekjamshidi, Z., & Islam, M. R. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3031731 · Cited by 11
Stevanovic, B., Salinas, G., Alou, P., Cobos, J. A., & Vasić, M. (2022) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2022.3156123 · Cited by 11
“Inductor core losses are calculated by improved general Steinmetz equation (iGSE) which is discussed in [29] and implemented in [30].”
MethodPractical Study of Mixed-Core High Frequency Power Transformer
Paul, A. K. (2022) · Magnetism · doi:10.3390/magnetism2030022 · Cited by 11
Fast protection strategy for monopole grounding fault of low-voltage DC microgrid
Peng, Y., Song, Z., Zeng, X., Pan, Z., Zhang, S., Shen, X., & Wang, L. (2022) · Electric Power Systems Research · doi:10.1016/j.epsr.2022.108919 · Cited by 11
Design and Performance Comparison of Multi-Frequency Inductors for Megahertz Wireless Power Transfer
Yang, R. S., Nikiforidis, I., Pucci, N., Joisher, M. V., Wagle, P., Mitcheson, P. D., & Perreault, D. J. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509134 · Cited by 11
“To do this, we first modeled core loss as a function of the number of turns using the iGSE core loss model [19], [20].”
MethodInfluentialDeep Neural Network for Magnetic Core Loss Estimation using the MagNet Experimental Database
Shen, X., Wouters, H., & Martinez, W. (2022) · Lirias · Cited by 11
Two-Dimensional Gapping to Reduce Light-Load Loss of Point-of-Load Inductor
Ge, T., Ngo, K. D. T., & Moss, J. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2537273 · Cited by 11
“where Pv0 is the core loss without dc effect, which can be calculated by such models as MSE [36], GSE [37], iGSE [38], or”
MethodAnalysis and Design for a High Power Density Three-Phase AC Converter Using SiC Devices
Lai, R. (2008) · Cited by 11
Modelling and Control of Switched Reluctance Machines
Araújo, R. E., & Camacho, J. R. (2020) · IntechOpen eBooks · doi:10.5772/intechopen.82219 · Cited by 11
How Good are the Design Tools in Power Electronics?
Lagier, T., Dworakowski, P., Chédot, L., Wallart, F., Lefebvre, B., Maneiro, J., Páez, J. D., Ladoux, P., & Buttay, C. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215942 · Cited by 13
“For the core losses, the improved General Steinmetz Equations (iGSE) are used [21].”
BackgroundMethodEnergy Harvesting Comparison and Analysis in 1000V and 1500V Grid-Connected PV Systems
Stevanovic, B., Serban, E., Vasić, M., Ordonez, M., Cóbreces, S., & Alou, P. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9236312 · Cited by 11
“Inductor core losses are calculated by improved general Steinmetz equation (iGSE) which is discussed in [28] and implemented in [29].”
MethodEMI Filter Robustness in Three-Level Active Neutral-Point-Clamped Inverter
Shen, Z., Chen, M., Wang, H., Wang, X., & Blaabjerg, F. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3124282 · Cited by 12
Boundary Condition Independent Thermal Network Modeling of High-Frequency Power Transformers
Dey, A., Shafiei, N., Li, R., Eberle, W., & Khandekar, R. (2022) · Heat Transfer Engineering · doi:10.1080/01457632.2022.2049548 · Cited by 12
“The total volumetric core loss (Pc) in the transformer can be evaluated by the modified Steinmetz equation for non-sinusoidal current excitation [29].”
MethodDesign of Dry-type High-power High-frequency Transformer Based on Triangular Closed Core
Cao, Z., Chen, W., Jiang, J., Zhang, K., Chen, Y., & Shen, Z. (2021) · IEEE Sustainable Power and Energy Conference (iSPEC) · doi:10.1109/ispec53008.2021.9735925 · Cited by 11
“Loss algorithm 1) Core loss of HFT The improved generalized Steinmetz equation (IGSE) is used for the core loss calculation [12], which is shown in (2).”
MethodKnowledge-aware Artificial Neural Network for Loss Modeling of Planar Magnetic Components
Deng, J., Wang, W., Venugopal, P., Popović, J., & Rietveld, G. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9947398 · Cited by 11
“Analytical modeling, such as [2] [3], is easy to understand since it is directly derived from physical laws.”
BackgroundIron Loss Calculation Methods for Numerical Analysis of 3D-Printed Rotating Machines: A Review
Orosz, T., Horváth, T., Tóth, B., Kuczmann, M., & Kocsis, B. (2023) · Energies · doi:10.3390/en16186547 · Cited by 11
Lazarević, V. Ž., Zubitur, I., Vasić, M., Oliver, J. A., Alou, P., Patchin, G., Eltze, J., & Cobos, J. A. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2884959 · Cited by 11
“The estimated power loss for the mentioned designed case and for the constant zero output voltage is calculated via improved generalized Steinmetz equation [31] for the core”
Conceptualization and Multi-Objective Analysis of Multi-Cell Solid-State Transformers
Huber, J. (2016) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-b-000164724 · Cited by 17
“HF core losses are considered using the iGSE approach [100], because the core losses of this type of material are quite sensitive to flux components at high-frequencies.”
MethodVardhan, H., Odavić, M., & Atallah, K. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9948210 · Cited by 10
“For calculating the core loss per unit volume, the general Steinmetz equation (GSE) is frequently used under sinusoidal excitation given as (33), however, for applications such as DAB, the core loss in the transformer is calculated using the improved GSE (iGSE) equation (34) [9].”
MethodYin, Y., Wang, W., Wang, N., & Chen, A. (2023) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2023-ecceasia54778.2023.10213535 · Cited by 10
“Therefore, the improved general Steinmetz equation (iGES) [9] is used to estimate the core loss in this paper.”
MethodLi, H., Gao, Z., Wang, F., Ma, Y.-W., Su, Y., Li, D., Yao, P., Ji, S., Yang, Z., & Chen, R.-R. (2023) · IEEE Access · doi:10.1109/access.2023.3335380 · Cited by 10
“The core loss is estimated by the iGSE method with the current waveform from MATLAB simulation [53].”
MethodHuang, Q., Li, Y., Dou, Y., Li, Y., Zhu, J. G., & Li, S. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3547310 · Cited by 10
“However, these traditional methodologies for core loss estimation are often prone to serious errors [6], [7], [8], [9], [12] or have a narrow applicable operating range [10], [14].”
Core Loss Model for Nonsinusoidal Excitations Based on Vector Magnetic Circuit Theory
Li, C., Cheng, M., Qin, W., Wang, Z., Ma, X., & Wang, W. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3588673 · Cited by 10
“For the calculation of core loss under nonsinusoidal excitation, there are many methods based on SE, such as, the modified SE (MSE) [12], the generalized SE (GSE) [13], the improved GSE (iGSE) [14], the improved iGSE (i 2 GSE) [15] the improved SE (ISE) [16], and so on [17], [18].”
Zade, A., Gurudiwan, S., & Zane, R. A. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3619441 · Cited by 11
“Four U46/40/28 ferrite cores from Ferroxcube are used and the cores are paralleled to reduce the flux density and minimize hysteresis losses, which have been calculated using the iGSE [54].”
Design and Testing of a Medium Frequency Transformer
Ren, X., Li, J., Weng, H., Wang, R., & Xu, D. (2021) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec42165.2021.9487310 · Cited by 10
Gomez, R. A., Oggier, G. G., Fantino, R. A., Balda, J. C., & Zhao, Y. (2021) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce47101.2021.9595466 · Cited by 10
“The core losses can be estimated using the improved generalized Steinmetz equation (iGSE) (4) [21] which is well accepted and used to design MFTs [19], [20], [22]:”
MethodDeep Reinforcement Learning for DC-DC Converter Parameters Optimization
Tian, F., Cobaleda, D. B., & Martinez, W. H. (2022) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie51582.2022.9831660 · Cited by 10
Shen, X., & Martinez, W. H. (2023) · European Conference on Power Electronics and Applications · doi:10.23919/epe23ecceeurope58414.2023.10264272 · Cited by 10
Park, H.-C., Yang, J.-U., Jang, J.-S., & Kim, R.-Y. (2023) · IEEE Access · doi:10.1109/access.2023.3346322 · Cited by 10
“Several modified equations have been proposed to rectify this discrepancy for nonsinu-soidal applications, which includes the modified Steinmetz equation (MSE), general Steinmetz equation (GSE), and improved general Steinmetz equation (IGSE) [21], [22].”
BackgroundDing, S., Zhang, Z., Chen, L., Qian, Q., & Sun, W. (2024) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2024.3413784 · Cited by 10
Limits and Opportunities for Distributed Inductors in High-Current, High-Frequency Applications
Collins, C., & Duffy, M. C. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2047117 · Cited by 10
“Different models emerged to account for the dependence of loss on the rate of change of flux density dB/dt, rather than simply on its level, and the most accurate model for MnZn ferrites was found to be the improved general Steinmetz equation (iGSE) method [23], [24] as given by”
MethodZdanowski, M., Rąbkowski, J., & Barlik, R. (2017) · Energies · doi:10.3390/en10030363 · Cited by 10
“Estimation of core losses (P_Fe) in the inductors have been prepared with the use of well-known Steinmetz equations (iGSE—improved Generalized Steinmetz Equation) for ferrite type material 3F3 [32,33].”
MethodThermal Coupling and Network Modeling for Planar Transformers
Shen, Z., Shen, Y., Liu, B., & Wang, H. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8558235 · Cited by 11
A Coupled, Semi-Numerical Model for Thermal Analysis of Medium Frequency Transformer
Tian, H., Wei, Z., Vaisambhayana, S., Thevar, M. P., Tripathi, A., & Kjær, P. C. (2019) · Energies · doi:10.3390/en12020328 · Cited by 10
“In the case of arbitrarily shaped excitations, several models have been developed for core loss modeling, including the modified Energies 2019, 12, 328 4 of 16 Steinmetz equation (MSE), general Steinmetz equation (GSE), and improved generalized Steinmetz equation (iGSE), which are all based on the OSE [37].”
BackgroundInfluentialEMI Suppression With Distributed $LLC$ Resonant Converter for High-Voltage VR-on-Package
Xu, K., Vaisband, B., Sizikov, G., Li, X., & Friedman, E. G. (2019) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2019.2960699 · Cited by 10
Switched Reluctance Motor Modeling and Loss Estimation Review
Melo, P. S., & Araújo, R. E. (2020) · IntechOpen eBooks · doi:10.5772/intechopen.92228 · Cited by 10
“To overcome this limitation, in [30] the flux density waveform is split into a major loop and minor loop(s), in order to consider the later one effect over loss calculation.”
BackgroundA New Filter Concept for High Pulse-Frequency 3-Phase AFE Motor Drives
Hoffmann, S. G., Bock, M., & Hoene, E. (2021) · Energies · doi:10.3390/en14102814 · Cited by 10
“The factor for calculation with a sinusoidal excitation kp is converted for use in the generalized Steinmetz equation as described in [20].”
MethodHerman, J., Bojkovski, J., Fišer, R., & Drobnič, K. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3089482 · Cited by 10
Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density
Lu, R., Yu, J., Feng, D., Bu, K., Yang, Z., Li, C., & Li, W. (2021) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec42165.2021.9487134 · Cited by 10
“When the transformer works in DAB topology, the excited voltage waveform is square wave, with this excitation the loss density of the magnetic core can be calculated by the improved general Steinmetz (iGse) formula and the Steinmetz parameters.[7]-[9]”
MethodSingle-Phase Operating Modes for DC–DC Three-Phase Dual-Active-Bridge With YΔ Transformer
Cúnico, L. M., & Kirsten, A. L. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3142686 · Cited by 10
Paul, A. K. (2022) · Power Electronic Devices and Components · doi:10.1016/j.pedc.2022.100005 · Cited by 10
Metadata
- Authors
- Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H.
- Affiliations
- Dartmouth College (US)
- Universidad de Buenos Aires (AR)
- Venue
- 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings.
- Publisher
- IEEE
- Published
- 2003-06-26
- Pages
- 36-41
- ISSN
- 2151-0997 (ISSN-L)
- OpenAlex
- W2109185194
- Cited by
- 1,145
- References
- 23
- Citations by year
- 2026: 49 · 2025: 76 · 2024: 105 · 2023: 82 · 2022: 99 · 2021: 85 · 2020: 104 · 2019: 86 · 2018: 66 · 2017: 67 · 2016: 57 · 2015: 45 · 2014: 47 · 2013: 40 · 2012: 33
- FWCI
- 5.50
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE ... Workshop on Control and Modeling for Power Electronics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Magnetic Properties and Synthesis of Ferrites
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Keywords
- non-sinusoidal waveforms, hysteresis loss, recursive algorithm, magnetic materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.