Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
An improved calculation of ferrite core loss for nonsinusoidal waveforms separates a flux trajectory into major and minor loops via a new recursive algorithm. It is highly accurate and outperforms two previous methods for our measured data. The only characteristics of the material required are the standard Steinmetz-equation parameters.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
General properties of power losses in soft ferromagnetic materials
Bertotti, G. (1988) · IEEE Transactions on Magnetics · doi:10.1109/20.43994 · Cited by 2,162 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Mathematical models of hysteresis
Mayergoyz, I. (1986) · IEEE Transactions on Magnetics · doi:10.1109/tmag.1986.1064347 · Cited by 1,166
[Mathematical models of hysteresis]
Mayergoyz, I. D. (1991) · doi:10.2172/6911694 · Cited by 708
Soft Ferrites—Properties and Applications
Brailsford, F. (1970) · Electronics and Power · doi:10.1049/ep.1970.0192 · Cited by 613
Improved calculation of core loss with nonsinusoidal waveforms
Li, J., Abdallah, T., & Sullivan, C. R. (2002) · Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248) · doi:10.1109/ias.2001.955931 · Cited by 531 · cited 10×
“In [6], the MSE and GSE are compared with experimental data, and while both provide a vastly better approximation than the basic Steinmetz equation (1), and the GSE avoids some problems exhibited in the MSE, each has significant error in at least one region.”
BackgroundMethodResultInfluentialSelf-citation(1998) · doi:10.1016/b978-0-12-093270-2.x5048-x · Cited by 487
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation
Reinert, J., Brockmeyer, A., & De Doncker, R. W. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.806023 · Cited by 409 · cited 4×
“The consideration of these Axioms 1 and 2 allows one to see that the MSE [5] and the model in [20] cannot be expected to work well for truly general consideration of many different possible waveforms; the problems with the MSE were confirmed experimentally in [5].”
BackgroundMethodInfluentialSteinmetz, C. P. (1892) · Transactions of the American Institute of Electrical Engineers · doi:10.1109/t-aiee.1892.5570437 · Cited by 407 · cited 1×
“A similar equation, but without the frequency dependence, was proposed by Steinmetz in 1892 [3], and so (1) is often referred to as the Steinmetz equation.”
BackgroundAn improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform
Fiorillo, F., & Novikov, A. (1990) · IEEE Transactions on Magnetics · doi:10.1109/20.104905 · Cited by 382 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Albach, M., Durbaum, T., & Brockmeyer, A. (2002) · PESC Record. 27th Annual IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1996.548774 · Cited by 225
Research works printed but not linked: 4
- vorperian, 2002, Using fractals to model eddy-current losses in ferromagnetic materials, Switching power Magazine, 3, 18
- mulder, 1995, Power ferrite loss formulas for transformer design, Powerconversion and Intelligent Motion, 21, 22
- 2000, MATLAB Version 6
- ridley, 2002, Modeling ferrite core losses, Switching power Magazine, 3, 6
Cited by
Items 701–800 of 1,000
Improved estimation of iron losses for non-sinusoidal voltages
Ioniţă, V., Petrescu, L., & Cazacu, E. (2018) · COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering · doi:10.1108/compel-12-2017-0527 · Cited by 5
GaN‐based single‐phase bridgeless PFC boost rectifier
Jappe, T. K., Lohn, M. K., & Mussa, S. A. (2019) · The Journal of Engineering · doi:10.1049/joe.2018.8083 · Cited by 5
Comparative Evaluation of Electrical and Calorimetric Methods to Estimate Core Loss in Powder Cores
Ishikura, Y., Imaoka, J., Noah, M., & Yamamoto, M. (2019) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.8.386 · Cited by 5
Optimization of Medium Frequency Transformers with Practical Considerations
Booth, K., Subramanyan, H., Liang, X., Líu, J., Srdic, S., & Lukic, S. M. (2019) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2019.8722164 · Cited by 5
Tian, H., Vaisambhayana, S., & Tripathi, A. (2019) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2019-ecceasia42246.2019.8796853 · Cited by 5
Inductor Design Methodology for Power Electronics Applications
Vilkn, P. H. J., Morais, L. M. F., Santana, R. A. S., Cortizo, P. C., & Seixas, P. F. (2019) · IEEE Brazilian Power Electronics Conference and Southern Power Electronics Conference · doi:10.1109/cobep/spec44138.2019.9065867 · Cited by 5
“The improved generalized steinmetz equation (IGSE) developed in [8], an improved form of the GSE method [9], enables losses estimation using the parameters of the Steinmetz equation and the density vector of time flow.”
MethodSimplification of Thermal Networks for Magnetic Components in Space Power Electronics
de la Hoz, D., Salinas, G., Šviković, V., & Alou, P. (2020) · Energies · doi:10.3390/en13112903 · Cited by 5
“Regarding the core losses in the ferromagnetic core are calculated by means of the improved Generalized Steinmetz Equation [31], which shows a good consistency validated with measurements.”
MethodAwasthi, A. K., Bagawade, S., & Jain, P. K. (2020) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec39645.2020.9124370 · Cited by 5
“The Improved Generalized Steinmetz equation (iGSE) has been proven to demonstrate minimum core loss error for a non-sinusoidal arbitrary magnetic flux waveform without any extra parameter requirement apart from the Steinmetz parameters in a datasheet [30,31].”
MethodA 480V to 45V GaN Bidirectional AC-DC Converter for Grid-Tied Battery Energy Storage System (BESS)
Chen, T., Yu, R., Huang, A. Q., & Atcitty, S. (2020) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec39645.2020.9124128 · Cited by 5
“The DC resistance of primary and secondary winding can be calculated through geometry[19, 20].”
BackgroundZhao, X.-J., Wang, R., Du, Z., Dong, L., & Liu, L. (2020) · IEEE Access · doi:10.1109/access.2020.3029164 · Cited by 5
Nitzsche, M., Zehelein, M., Weimer, J., Koch, D., & Roth‐Stielow, J. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215933 · Cited by 5
“The core losses are derived using the improved generalized Steinmetz equation (iGSE) [30] in dependence on the peak-to-peak flux density ∆B, its derivation dB dt and the switching period T .”
MethodTransient thermal models of capacitors and inductors for system optimization
Karaventzas, V., Biela, J., & Rodriguez-Mateos, F. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215647 · Cited by 5
“There, the iGSE method [17] is used in the simulations for calculating the core losses.”
MethodGenetic Algorithm Based Multi Objective Optimization for Inductor Design
Schobre, T., Aríztegui, R. G., & Mallwitz, R. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215902 · Cited by 5
“The calculation with IGSE is well suited whenever the current can be described with a piece-wise linear (PWL) waveform.”
BackgroundMethodInfluentialSeparation of Magnetic Flux Density Trajectories into Subloops for the Prediction of Hysteresis Loss
Stenglein, E., Albach, M., & Duerbaum, T. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215607 · Cited by 5
“The strategy for splitting the magnetic flux density trajectory into subloops derived above agrees with the recursive algorithm proposed in [5].”
BackgroundMethodMaheri, H. M., Vinnikov, D., Chub, A., & Sidorov, V. E. (2020) · IEEE International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON) · doi:10.1109/rtucon51174.2020.9316587 · Cited by 5
“The method of the core losses calculation [15] was adopted:”
MethodStep-Up and Step-Down Converter Integrated With Motor Inverter for Powertrain Applications
Erni, I. R., Vidal‐Idiarte, E., & Calvente, J. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3105610 · Cited by 6
“Improved generalized Steinmetz equation detailed in [19] allows to calculate core losses for arbitrary shape waveforms”
BackgroundConnaughton, A., & Langbauer, T. (2021) · IEEE Design Methodologies Conference (DMC) · doi:10.1109/dmc51747.2021.9529948 · Cited by 5
Blasuttigh, N., Beiranvand, H., Pereira, T., Castellan, S., & Liserre, M. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9947733 · Cited by 5
Bolsi, P. C., Prado, E. O., Sartori, H. C., & Pinheiro, J. R. (2022) · Seminar on Power Electronics and Control (SEPOC) · doi:10.1109/sepoc54972.2022.9976439 · Cited by 5
“The modifications that are the most comprehensive and widespread are the Modified Steinmetz Equation (MSE) [11], the Improved Generalized Steinmetz Equation (IGSE) [12], the 20 22 1 4t h Se m in ar o n Po w er E le ct ro ni cs a nd C on tro l ( SE PO C ) | 9 78 -1 -6 65 470 89 -6 /2 2/ $3 1.”
BackgroundMethodZhao, X.-J., Wu, X., Wang, H., & Yu, M. (2023) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2023.171269 · Cited by 5
Magnetics design for a 2.5-kW battery charger
Janghorban, S., Teixeira, C. A., Holmes, D. G., McGoldrick, P., & Yu, X. (2014) · Australasian Universities Power Engineering Conference · doi:10.1109/aupec.2014.6966634 · Cited by 5
Garcia‐Bediaga, A., Villar, I., Mir, L., Etxeberria‐Otadui, I., & Rufer, A. C. (2014) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2014.6954137 · Cited by 5
“Due to the proliferation of power electronics based systems, and being aware of the lack of expressions for non-sinusoidal magnetization cases, the Improved Generalized Steinmetz Equation [11] is applied within this design methodology for the obtention of the magnetic specific core loss expression Ps:”
MethodImproved EMC filter performance of ferrite cores based on hysteresis and saturation
Wunsch, B., Skibin, S., Christen, T., & Forsström, V. (2019) · International Symposium on Electromagnetic Compatibility - EMC Europe (EMC Europe) · doi:10.1109/emceurope.2019.8872023 · Cited by 5
“The nonlinear core behavior can then be included in a postprocessing step used to calculate core losses, for example based on the Steinmetz equation [11], [12].”
MethodBrandelero, J. (2015) · theses.fr (ABES) · doi:10.70675/2b9abe8cz8a7cz40ebza7deze08597ab0e6d · Cited by 25
dos Santos, V. (2019) · theses.fr (ABES) · doi:10.70675/4dbd5faez0a25z4cc0zb830z9790c61066f6 · Cited by 28
Optimal Design and Modulation of Full Bridge LLC Resonant Converter With Wide Voltage Range
Zou, J., Yuan, X., Chen, Y., Luo, T., Wan, L., & Luo, Q. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3661123 · Cited by 4
“8 and (38), the K = 0.02473, α = 1.7474, β = 2.4415 Compared to the OSE model, the iGSE model has the same parameters ( K , α , and β ) and higher accuracy [22].”
InfluentialLi, Y., Qin, K., Mu, S., & Yin, J. (2024) · AIP Advances · doi:10.1063/9.0000620 · Cited by 7
Yang, W., Xu, Y., Chen, Q., Hu, J., Cui, B., Yang, Z., Zhao, B., & Sun, Q. (2023) · IEEE Sustainable Power and Energy Conference (iSPEC) · doi:10.1109/ispec58282.2023.10402808 · Cited by 4
“…history, Professor Sullivan proposed the Generalized Steinmetz Improved Equation-IGSE ( Improved GSE ) method, which replaces the instantaneous magnetic density B(t) in GSE with the peak-to-peak value of the magnetic density, making the accuracy of IGSE improved compared to GSE and MSE [11].”
MethodFast Efficiency Mapping Procedure for PMSM Accounting for the PWM Supply Impact
Ragazzo, P., Dilevrano, G., Bojoi, A., Ferrari, S., & Pellegrino, G. (2024) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit58233.2024.10540816 · Cited by 4
“Concerning the loss model, the original iGSE [12] is firstly applied via MATLAB scripting to the FEMM field solution to retrieve the iron loss of each mesh element (3).”
MethodMustafa, U., Kougioulis, I., Watson, A. J., Wheeler, P. W., & Ahmed, M. R. (2024) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec60657.2024.10598844 · Cited by 4
“The generalized Steinmetz equation for core loss can be derived as following [11]: where k t is the temperature coefficient, k s depends upon the Steimetz coefficients α , β and k of the ferrite material, V c is the volume of the core, T is the period and inversely related to the frequency of…”
BackgroundIron Loss in Electrical Machine - Influencing Factors, Model, and Measurement
Yi, J., Dong, Q., Sun, J., Sun, L., Li, X., Goh, H. H., Zhao, H., Wu, T., & Zhang, D. (2024) · Progress In Electromagnetics Research B · doi:10.2528/pierb24060802 · Cited by 4
“…models include Modified Steinmetz Equation (MSE) [56], Generalized Steinmetz Equation (GSE) [57], Improved Generalized Steinmetz Equation (IGSE) [58], and Natural Stein-metz Extension (NSE) [59], and several enhanced versions of Steinmetz model have been introduced in detail in references [11,…”
Modelling Framework Architecture for Converter Optimisation and Virtual Component Prototyping
Ewald, T., Krismer, F., & Biela, J. (2024) · Energy Conversion Congress and Expo Europe (ECCE Europe) · doi:10.1109/ecceeurope62508.2024.10751872 · Cited by 4
“The models that are implemented in the inductor’s CDT are [12] for the power losses and the inductance, [13] for the core losses, and [14] for the temperature, all of which are therefore integral part of the DAF.”
Data-Driven Component-Level Design of Switching Power Converters Using Predictive Modeling
Reese, S., Sauter, B., & Maksimović, D. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3555147 · Cited by 4
“Furthermore, inductor core loss P Lc is estimated using the improved generalized Steinmetz equation (iGSE) approach [48].”
Pathirannahalage, S. V., Mierczak, L., & Bilgin, B. (2025) · IEEE Access · doi:10.1109/access.2025.3556905 · Cited by 4
“These include the modified Steinmetz Equation (MSE) [42], [43], the Generalized Steinmetz Equation (GSE) [43], [44], and the improved generalized Steinmetz Equation (iGSE) [40], [43].”
Low Profile Superparamagnetic Inductor for Portable Electronics Power Management
Sanusi, B. N., Zambach, M., Varón, M., Beleggia, M., Frandsen, C., & Ouyang, Z. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3591201 · Cited by 5
“Due to the nonsinusoidal shape of the flux, iGSE [46], [47] is more suitable than the traditional SE.”
Instantaneous Core Loss – Cycle-by-Cycle Modeling of Power Magnetics in PWM Converters
Cui, B., Wang, J., Yuan, X., Martinez, A., Slama, G., Wilkowski, M., Ota, R., & Wãda, K. (2025) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2025.3628447 · Cited by 4
“The most common modeling method used in the industry is the Steinmetz equation (SE) and its variants [5], [6].”
Is acoustically oriented control always inefficient for an automotive switched reluctance machine?
Hofmann, A., Schenk, M., Weiss, C. P., Ralev, I., Klein‐Hessling, A., & Doncker, R. W. D. (2014) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2014.7013983 · Cited by 4
Ruszczyk, A., & Sokalski, K. (2015) · COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering · doi:10.1108/compel-11-2013-0407 · Cited by 4
Point-of-load inductor with high swinging and low loss at light load
Ge, T., Ngo, K. D. T., & Moss, J. (2016) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2016.7467943 · Cited by 4
“The dependence of core loss density Pv on dc magnetic field intensity Hdc is accounted for by the function Kdc(Hdc) [35]: = (4) where Pv0 is the core loss without dc effect, which can be calculated by such models as MSE [36], GSE [37], iGSE [38], or RESE [39].”
BackgroundInfluence of harmonics' initial phases on magnetic losses in non-oriented grains FeSi sheets
Ioniţă, V., Petrescu, L., & Cazacu, E. (2016) · International Symposium on Fundamentals of Electrical Engineering · doi:10.1109/isfee.2016.7803213 · Cited by 4
“However, the designers still use the wellknown Steinmetz formula [1] for the estimation of magnetic (iron) losses in soft magnetic materials, which are used in power transformers or electrical machines; new improved formulas were reported [2], even for non-sinusoidal waveforms [3].”
Loss Behavioral Modeling for Ferrite Inductors
Capua, G. D., Femia, N., & Stoyka, K. (2018) · International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design · doi:10.1109/smacd.2018.8434859 · Cited by 4
“In particular, the AC winding loss has been evaluated as in (2), the i-GSEbased core loss estimated as discussed in [9].”
BackgroundMethodLagier, T., Dworakowski, P., Buttay, C., Ladoux, P., Wilk, A., Camail, P., & Justin, E. C. A. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215631 · Cited by 4
Design and Verification of a High Ratio Medium Frequency Transformer for Subsea Power Conversion
Lu, R., Sheng, J., Yao, Y., Li, C., Li, W., & He, X. (2021) · IEEE ECCE Asia Downunder · doi:10.1109/ecce-asia49820.2021.9479166 · Cited by 4
An Automated Design Tool for Three-phase Motor Drives
Dong, Z., Ren, R., Wang, F., & Chen, R. (2021) · IEEE Design Methodologies Conference (DMC) · doi:10.1109/dmc51747.2021.9529944 · Cited by 4
“For both routines, the core loss is calculated with iGSE considering the trade-off of accuracy and computational efforts [21].”
MethodOestergaard, C., Kjeldsen, C. S., & Nymand, M. (2021) · European Conference on Power Electronics and Applications · doi:10.23919/epe21ecceeurope50061.2021.9570592 · Cited by 4
Baek, S., & Lee, J. S. (2022) · Electrical Engineering · doi:10.1007/s00202-022-01522-7 · Cited by 4
Delhommais, M., Delaforge, T., Schanen, J., Würtz, F., & Rigaud, C. (2022) · Designs · doi:10.3390/designs6040068 · Cited by 4
“Thanks to the knowledge of semiconductors electrical and thermal properties and switched current and voltage (i.e., converter switching cell voltage and current wave-forms), the classical analytical model [27] can be used to determine their conduction and switching losses. optimization variable.”
A Multi-Domain Model for Variable Gap Iron-Cored Wireless Power Transmission System
Reato, F. M., Cinquemani, S., Ricci, C., Misfatto, J., & Calzaferri, M. (2023) · Applied Sciences · doi:10.3390/app13031820 · Cited by 4
Bündgen, D., Thönnessen, A., & Doncker, R. W. D. (2023) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2023-ecceasia54778.2023.10213497 · Cited by 4
“The core losses are calculated using the improved Generalized Steinmetz Equation [10], which is fed by the flux density estimated by FEMM.”
MethodOptimisation of Magnetic Loss Trade-offs in High-Frequency Litz Wire Transformers
Wouters, H., Shen, X., Pervaiz, H., & Martinez, W. H. (2023) · European Conference on Power Electronics and Applications · doi:10.23919/epe23ecceeurope58414.2023.10264333 · Cited by 4
A High Power 200kW Medium Frequency Transformer With Improved Thermal Management
Guo, Z., Chen, C., Yu, R., & Huang, A. Q. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362391 · Cited by 4
Compact Switched-Inductor Power Supplies: Design Optimization with Second-Order Core Loss Model
Guérin, G., & Rincón-Mora, G. A. (2024) · Electronics · doi:10.3390/electronics13152977 · Cited by 4
Accelerating Multi-Objective Optimization for Next-Generation Magnetic Devices
Li, Y., Gradinger, T. B., & Burkart, R. M. (2024) · Energy Conversion Congress and Expo Europe (ECCE Europe) · doi:10.1109/ecceeurope62508.2024.10752031 · Cited by 4
“The core losses are calculated using the improved generalized Steinmetz equation (iGSE) [10], with the required parameters interpolated from the loss maps [11,12].”
Zhou, L., Expósito, A. D., Ruszczyk, A., Round, S. D., & Vasić, M. (2025) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48143.2025.10977408 · Cited by 4
“The Improved Generalized Steinmetz Equation (IGSE) is selected due to its optimal and comprehensive approach to estimating core losses [15] with equations (6).”
Çetin, S. (2014) · Journal of Engineering Research · doi:10.1016/s2307-1877(25)00402-x · Cited by 4
Park, J. H., & Kim, S. (2013) · Journal of Magnetics · doi:10.4283/jmag.2013.18.2.105 · Cited by 4
Online High-Speed PMSM Parameters Estimation and Stability Analysis
Novák, M., Flah, A., Novák, J., & Sbita, L. (2014) · Acta Polytechnica Hungarica · doi:10.12700/aph.11.09.2014.09.5 · Cited by 4
“Stator core losses could be determined by the Steinmetz equation [24] [25].”
MethodMattsson, A., Nuutinen, P., Kaipia, T., Peltoniemi, P., Karppanen, J., Tikka, V., Lana, A., Pinomaa, P., Silventoinen, P., & Partanen, J. (2018) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec.2018.8507675 · Cited by 4
“The core losses were calculated using the Improved Generalized Steinmetz Equation (iGSE) [36] and the current waveform in the inductor.”
BackgroundMethodInvestigation of Optimal Excitation Waveforms for Medium Frequency Transformers
Zhang, Z., Zhang, L., Qin, J., Duan, Q., & Sheng, W. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8558423 · Cited by 4
“With the emergence of the modified Steinmetz equation (MSE) [11], the general Steinmetz equation (GSE) [12], the improved Steinmetz equation (iGSE) [13], and the improved improved Steinmetz equation (i(2)GSE) [14], it is possible to estimate magnetic core loss under arbitrary excitation voltage waveforms.”
MethodValidation of Inductor Analytical Loss Models under Saturation Conditions for PWM inverter
Voldoire, A., Ferrieux, J.-P., Schanen, J., Rizet, C., Gautier, C., & Saber, C. (2019) · European Conference on Power Electronics and Applications · doi:10.23919/epe.2019.8915174 · Cited by 4
“A lot of efforts have been put in providing effective formulas to adapt the well-known Steinmetz equation to actual waveforms of power Electronics [5]-[6], as iGSE.”
MethodInfluentialFernandez, M., Ghosh, A., & Erickson, R. W. (2019) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda46397.2019.8998795 · Cited by 4
Novel Methods for In-situ Direct Magnetic Loss Measurement in a DC-DC Converter
Yi, L., & Moon, J. (2020) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec39645.2020.9124141 · Cited by 4
“There have been efforts to enhance the accuracy of the original Steinmetz – notably modified Steinmetz Equation (MSE) [4], Generalized Steinmetz Equation (GSE) [5], improved Generalized Steinmetz Equation (iGSE) [6] , etc.”
MethodVoldoire, A., Schanen, J., Ferrieux, J.-P., Sarrazin, B., Gautier, C., & Ali, M. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9235333 · Cited by 4
“This induction ripple is used in the iGSE model [15] to compute iron losses.”
MethodChristidis, G. C., Nanakos, A. C., & Tatakis, E. C. (2021) · Energies · doi:10.3390/en14227480 · Cited by 4
“To estimate the transformer core losses, the improved Generalized Steinmetz equation (iGSE) [25] is used, which is an empirical formula derived in order to apply the Steinmetz equation [26] for non-sinusoidal current waveforms, as is usually the case for power electronics converters.”
MethodA Buck-Boost Embedded Multilevel Inverter with Double Voltage Gain
Mouselinos, T. P., & Tatakis, E. C. (2021) · European Conference on Power Electronics and Applications · doi:10.23919/epe21ecceeurope50061.2021.9570686 · Cited by 4
“For the calculation of the inductor Lb core losses various methods are proposed in the literature for nonsinusoidal excitations, but in this case the improved generalized Steinmetz (iGSE) equation is used [17].”
MethodDetermination of Core Losses Using an Inverse Modeling Technique
Osemwinyen, O., Hemeida, A., Martin, F., Gürbüz, I. T., Ghahfarokhi, P. S., & Belahcen, A. (2022) · IEEE Access · doi:10.1109/access.2022.3158365 · Cited by 4
“Separation models were used in [2]–[4] to estimate the core losses.”
MethodModeling Core Losses Under Exciting Waveforms With Zero Voltage Period in Power Converters
Zhou, Y., Xie, W., Ma, C., & Huang, L. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3163570 · Cited by 4
“In order to handle the nonsinusoidal excitation waveforms in power converters, many improved Steinmetz equations have been developed, such as the modified Steinmetz equation [5], the generalized Steinmetz equation [6], the improved generalized Steinmetz equation [7], and the improved–improved Steinmetz equation [8]–[9…”
Method$\eta_{max}$-Charging Strategy for Lithium-Ion Batteries in V2G Applications
Beiranvand, H., Blasuttigh, N., Pereira, T., Hansen, S., Krüger, H., Liserre, M., & Pavan, A. M. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9947572 · Cited by 4
Yang, B., Wang, R., Xiao, F., Zhang, X., Jie, G., Gao, S., Wang, H., & Kang, W. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3237721 · Cited by 4
“Some scholars propose the iGSE model based on the Steinmetz model to calculate the core loss under nonsinusoidal excitation [16].”
MethodKulan, M. C., Baker, N. J., Liogas, K. A., Davis, O., & Taylor, J. (2023) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc55163.2023.10238928 · Cited by 4
“Local saturation is quite common in 3D flux machines with SMC and the core loss caused by arbitrary flux density waveforms can be best obtained by the knowledge of :(() with the implementation of iGSE [12].”
BackgroundLiu, B., Wu, X., Leary, A., Choksi, K., Wu, Y., & Luo, F. L. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362237 · Cited by 4
Automated Core Loss Tester Error Characterization for New Contributions to Large-Scale Datasets
Havugimana, E., & Ranjram, M. K. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861169 · Cited by 4
“For more accuracy, the relationship can be derived with extensions of Steinmetz [20]–[24].”
Genetic programming approach for identification of ferrite inductors power loss models
Capua, G. D., Femia, N., Migliaro, M., & Stoyka, K. (2016) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2016.7793000 · Cited by 4
“In [7][9] enhanced versions of the SE have been proposed, such as the Modified Steinmetz Equation and the improved Generalized Steinmetz Equation, valid for both sinusoidal and non-sinusoidal cases and requiring no more parameters than the basic SE.”
MethodZwysen, J., Gelagaev, R., Driesen, J., Goossens, S., Vanvlasselaer, K., Symens, W., & Schuyten, B. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6699279 · Cited by 4
“Core Loss Model To calculate the losses in the core, the improved generalized Steinmetz equation is used [10][11].”
MethodCarstensen, C., & Biela, J. (2012) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/epepemc.2012.6397271 · Cited by 4
“The core losses of the output inductor are calculated by using the iGES method [13].”
MethodA simple and low-cost method for miniature power transformers' hysteresis losses evaluation
Cazacu, E., & Petrescu, L. (2013) · International Symposium on Advanced Topics in Electrical Engineering · doi:10.1109/atee.2013.6563452 · Cited by 4
“An empirical formula based on a series of experimental studies was suggested by [19-23]:”
MethodResonant converter transformer design and optimization
Gamache, G. E., & Sullivan, C. R. (2011) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2011.6063823 · Cited by 4
“The loss value is calculated using the iGSE method [15], which in addition to flux waveforms requires only the Steinmetz parameters of the ferrite material and is valid for non-sinusoidal waveforms.”
MethodSelf-citationZhao, R., Jiang, X., Xu, H., Yan, Q., & Wang, Y. (2019) · IEEE Access · doi:10.1109/access.2019.2949015 · Cited by 4
“To realize the estimation of iron loss excited with the non-sinusoidal pulse voltage from the converter, various improved methods have been proposed, such asmodified Steinmetz equation (MSE) [18], [19], generalized Steinmetz equation (GSE) [20], improved generalized Steinmetz equation (IGSE) [21], improved-improved ge…”
MethodOptimization of isolated DC-DC converter topologies for fuel cell applications
Török, L., Christensen, N. H., Munk‐Nielsen, S., & Bęczkowski, S. (2019) · European Conference on Power Electronics and Applications · doi:10.23919/epe.2019.8915427 · Cited by 4
Electro-thermal Analysis of the Coupled Inductor for Quasi-Z Source Inverters
Peng, W., Liu, P., & He, M. (2019) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2019.8922550 · Cited by 4
“The core loss is directly associated with the macroscopic repeated magnetization rate [10],[11].”
BackgroundGonzález-Teodoro, J. R., Romero‐Cadaval, E., & Asensi, R. (2020) · IEEE Access · doi:10.1109/access.2020.2975063 · Cited by 4
“The improved Generalized Steinmetz equation [10] was developed to avoid the limitation in”
MethodPower Density and Loss Optimization Design Methodology of a 10 kW 2-Level 3-Phase SiC Inverter
Nielsen, A. B., Davari, P., Blaabjerg, F., & Nielsen, B. V. (2020) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel49091.2020.9265687 · Cited by 4
“The low frequency losses, are calculated using the Generalised Steinmetz Equation (GSE), while the high frequency losses, which are the dominant core losses, are calculated using the Improved Generalised Steinmetz Equation (iGSE) [11], [12], which is suggested in [10].”
MethodGhods, M., Faiz, J., Pourmoosa, A. A., & Khosrogorji, S. (2021) · International Journal of Engineering · doi:10.5829/ije.2021.34.05b.14 · Cited by 4
Iron Losses in Electromagnetic Devices: Nonlinear Adaptive MEC & Dynamic Hysteresis ModelPreprint
Messal, O., Dubas, F., Benlamine, R., Kedous‐Lebouc, A., Chillet, C., & Espanet, C. (2017) · Preprints.org · doi:10.20944/preprints201701.0131.v1 · Cited by 4
“They have led to the: • Modified Steinmetz equation (MSE) [2]; • Generalized Steinmetz equation (GSE) [3]; • Improved generalized Steinmetz equation (iGSE) [4]; • Natural Steinmetz extension (NSE) [5].”
BackgroundWhy MagNet: Quantifying the Complexity of Modeling Power Magnetic Material CharacteristicsPreprint
Chen, M. (2023) · doi:10.36227/techrxiv.21340989.v3 · Cited by 4
Videau, N. (2014) · theses.fr (ABES) · doi:10.70675/6861295eza43bz497fz9c37z0930b081e634 · Cited by 26
“Le flux magnétique a été estimé dans le coupleur à partir d’un modèle aux reluctances et les pertes fer ont été calculées à partir d’un modèle iGSE [141].”
Stackler, C., Fouineau, A., Ladoux, P., Morel, F., Wallart, F., Dworakowski, P., & Evans, N. (2019) · 2019 20th International Symposium on Power Electronics (Ee) · doi:10.1109/pee.2019.8923456 · Cited by 3
“The improved generalised Steinmetz equation (IGSE) [14] is used to calculate the magnetic losses, for the non-sinusoidal magnetic induction.”
MethodBarrera-Cárdenas, R., Zhang, J., Isobe, T., & Tadano, H. (2017) · European Conference on Power Electronics and Applications · doi:10.23919/epe17ecceeurope.2017.8099379 · Cited by 3
Saafan, A. A., Iurich, M., Fan, B., Dong, D., & Burgos, R. P. (2023) · International Symposium on Power Electronics (Ee) · doi:10.1109/ee59906.2023.10346197 · Cited by 3
“The magnetic design function is used to calculate inductor parameters such as: number of turns, air gap length, core losses by means of the improved Generalized Steinmetz Equation (iGSE) as introduced in [14] and winding losses as explained in [15].”
MethodA Hybrid Control Method for High Power LLC Converter with Wide Output Voltage Range
Zhang, J., Hu, C., & Xu, D. (2023) · IEEE International Power Electronics and Application Symposium (PEAS) · doi:10.1109/peas58692.2023.10395671 · Cited by 3
“…, turn on/off loss P on/off , reverse recovery loss P rr of the switches, the core loss P core and coper loss P strand of magnetic components etc. [13]: In (19), I rms is the transformer’s secondary side current; R ds_on is the Drain-source on-state resistance of rectifiers power devices; V s is…”
BackgroundParallel Resonant Loss Characterization of High-Frequency Magnetic Components
Brown, A., Solomentsev, M., & Hanson, A. J. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3463537 · Cited by 5
“Furthermore, using sinusoidal loss data to predict loss due to non-sinusoidal excitations can be done well in many situations with the improved generalized Steinmetz equation (iGSE) [6], which continues to undergo refinement, e.g., [37].”
Indented Core to Reduce and Desensitize Inductor’s Fringing Losses without Increasing Volume
Nassar, R., Datta, P., Lu, G., DiMarino, C., & Ngo, K. D. T. (2025) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48143.2025.10977229 · Cited by 3
Shen, X., Zuo, Y., Cobaleda, D. B., & Martinez, W. H. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3573876 · Cited by 3
“Traditional core loss estimation methods, including the Steinmetz equation (SE) [3], the improved generalized Stein-metz equation ( i GSE) [5], and i 2 GSE [6], often fail to address nonlinear dynamics and nonsinusoidal waveforms from techniques like pulsewidth modulation (PWM) [7], [8], [9], [10].”
Waveform Programming Control for Four-Switch Buck–Boost Converter With Minimum RMS Current
Shen, H., Liang, T., Zhang, Y., Jiang, R., Sun, D., & Sun, X. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3589776 · Cited by 3
“…winding at any position (k,t) within the magnetic core window Considering that the commonly used magnetic loss P m calculation Steinmetz equation can only calculate the core loss undersinusoidalexcitationconditions,theimprovedgeneralized Steinmetzequation(IGSE)isadoptedforcalculation[21].”
Three-Phase Fully Magnetically Integrated LCL Filters With Enhanced Ripple Attenuation Capability
Jiang, J., Wang, H., Pan, S., Liu, F., Zhao, E., & Liu, G. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3606569 · Cited by 3
“For the calculation of core loss, several methods have been widely used, such as the Steinmetz empirical formula [28] and the improved Steinmetz formula [29].”
Szczerba, P., & Worek, C. (2025) · Electronics · doi:10.3390/electronics14142883 · Cited by 3
Guillod, T., Zhang, D., Sullivan, C. R., & Kolar, J. W. (2025) · International Conference on Renewable Energy Research and Applications (ICRERA) · doi:10.1109/icrera66237.2025.11283728 · Cited by 3
“The corresponding core loss correction factor can be computed with the iGSE [21], [22].”
Self-citationInductor Loss Measurement for Power Electronics Using the Single-Winding Method
Wang, Y., & Wada, K. (2025) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.25003520 · Cited by 3
Loss modelling to optimize the overall drive train efficiency
Stempfle, M., Fischer, M., & Roth‐Stielow, J. (2015) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2015.7309147 · Cited by 3
“The iron losses L,DCDC,Fe P caused by eddy current and hysteresis losses of the iron core are calculated with the improved Generalized Steinmetz Equation (iGSE) which considers pulsed voltages [5].”
BackgroundMethodThermal analysis for improved packaging of 4-channel 42V/14V DC/DC converter
Lee, S.-Y., Pfaelzer, A., & van Wyk, J. D. (2004) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2004.1348800 · Cited by 3
Metadata
- Authors
- Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H.
- Affiliations
- Dartmouth College (US)
- Universidad de Buenos Aires (AR)
- Venue
- 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings.
- Publisher
- IEEE
- Published
- 2003-06-26
- Pages
- 36-41
- ISSN
- 2151-0997 (ISSN-L)
- OpenAlex
- W2109185194
- Cited by
- 1,145
- References
- 23
- Citations by year
- 2026: 49 · 2025: 76 · 2024: 105 · 2023: 82 · 2022: 99 · 2021: 85 · 2020: 104 · 2019: 86 · 2018: 66 · 2017: 67 · 2016: 57 · 2015: 45 · 2014: 47 · 2013: 40 · 2012: 33
- FWCI
- 5.50
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE ... Workshop on Control and Modeling for Power Electronics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Magnetic Properties and Synthesis of Ferrites
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Keywords
- non-sinusoidal waveforms, hysteresis loss, recursive algorithm, magnetic materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.