Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
An improved calculation of ferrite core loss for nonsinusoidal waveforms separates a flux trajectory into major and minor loops via a new recursive algorithm. It is highly accurate and outperforms two previous methods for our measured data. The only characteristics of the material required are the standard Steinmetz-equation parameters.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
General properties of power losses in soft ferromagnetic materials
Bertotti, G. (1988) · IEEE Transactions on Magnetics · doi:10.1109/20.43994 · Cited by 2,162 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Mathematical models of hysteresis
Mayergoyz, I. (1986) · IEEE Transactions on Magnetics · doi:10.1109/tmag.1986.1064347 · Cited by 1,166
[Mathematical models of hysteresis]
Mayergoyz, I. D. (1991) · doi:10.2172/6911694 · Cited by 708
Soft Ferrites—Properties and Applications
Brailsford, F. (1970) · Electronics and Power · doi:10.1049/ep.1970.0192 · Cited by 613
Improved calculation of core loss with nonsinusoidal waveforms
Li, J., Abdallah, T., & Sullivan, C. R. (2002) · Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248) · doi:10.1109/ias.2001.955931 · Cited by 531 · cited 10×
“In [6], the MSE and GSE are compared with experimental data, and while both provide a vastly better approximation than the basic Steinmetz equation (1), and the GSE avoids some problems exhibited in the MSE, each has significant error in at least one region.”
BackgroundMethodResultInfluentialSelf-citation(1998) · doi:10.1016/b978-0-12-093270-2.x5048-x · Cited by 487
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation
Reinert, J., Brockmeyer, A., & De Doncker, R. W. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.806023 · Cited by 409 · cited 4×
“The consideration of these Axioms 1 and 2 allows one to see that the MSE [5] and the model in [20] cannot be expected to work well for truly general consideration of many different possible waveforms; the problems with the MSE were confirmed experimentally in [5].”
BackgroundMethodInfluentialSteinmetz, C. P. (1892) · Transactions of the American Institute of Electrical Engineers · doi:10.1109/t-aiee.1892.5570437 · Cited by 407 · cited 1×
“A similar equation, but without the frequency dependence, was proposed by Steinmetz in 1892 [3], and so (1) is often referred to as the Steinmetz equation.”
BackgroundAn improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform
Fiorillo, F., & Novikov, A. (1990) · IEEE Transactions on Magnetics · doi:10.1109/20.104905 · Cited by 382 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Albach, M., Durbaum, T., & Brockmeyer, A. (2002) · PESC Record. 27th Annual IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1996.548774 · Cited by 225
Research works printed but not linked: 4
- vorperian, 2002, Using fractals to model eddy-current losses in ferromagnetic materials, Switching power Magazine, 3, 18
- mulder, 1995, Power ferrite loss formulas for transformer design, Powerconversion and Intelligent Motion, 21, 22
- 2000, MATLAB Version 6
- ridley, 2002, Modeling ferrite core losses, Switching power Magazine, 3, 6
Cited by
A High Power Density Single-Phase PWM Rectifier With Active Ripple Energy Storage
Wang, R., Wang, F., Boroyevich, D., Burgos, R., Lai, R., Ning, P., & Rajashekara, K. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2090670 · Cited by 581
“The inductor core loss calculation is based on method in [6].”
MethodImproved Core-Loss Calculation for Magnetic Components Employed in Power Electronic Systems
Muhlethaler, J., Biela, J., Kolar, J. W., & Ecklebe, A. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2162252 · Cited by 535
“In [3], the approach is further improved, and in [4], a method on how to deal with minor hysteresis loops is presented and some minor changes on the equation are made.”
BackgroundMethodInfluentialTan, N. M. L., Abe, T., & Akagi, H. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2108317 · Cited by 490
Opportunities and Challenges in Very High Frequency Power Conversion
Perreault, D. J., Hu, J., Rivas, J. M., Han, Y., Leitermann, O., Pilawa-Podgurski, R. C. N., Sagneri, A., & Sullivan, C. R. (2009) · 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2009.4802625 · Cited by 476
Self-citationEngel, S. P., Stieneker, M., Soltau, N., Rabiee, S., Stagge, H., & De Doncker, R. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310656 · Cited by 443
Core Losses Under the DC Bias Condition Based on Steinmetz Parameters
Muhlethaler, J., Biela, J., Kolar, J. W., & Ecklebe, A. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160971 · Cited by 424
“The approach of [8], [9], and [10] leads to the improved generalized Steinmetz equation (iGSE)”
BackgroundMethodInfluentialReview of Fe-6.5 wt%Si high silicon steel—A promising soft magnetic material for sub-kHz application
Ouyang, G., Chen, X., Liang, Y., Macziewski, C., & Cui, J. (2019) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2019.02.089 · Cited by 424
Optimal Design and Tradeoff Analysis of Planar Transformer in High-Power DC–DC Converters
Ouyang, Z., Thomsen, O. C., & Andersen, M. A. E. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2046005 · Cited by 393
“For the full-bridge dc–dc converter operating with the symmetrical square waveforms, a new extension of Steinmetz equation can be deduced based on the IGSE and the PWL model Pv = 22α−1 · K · fα · Bβsqm · Dβ−α+1 (7) where D is the switching duty cycle.”
MethodInfluentialClassification and Comparative Evaluation of PV Panel-Integrated DC–DC Converter Concepts
Kasper, M., Bortis, D., & Kolar, J. W. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2273399 · Cited by 332
“The core losses of the inductor can be calculated for nonsinusoidal flux waveforms with the improved generalized Steinmetz equation [33] which yields the power loss per unit volume”
Method99% Efficient 10 kV SiC-Based 7 kV/400 V DC Transformer for Future Data Centers
Rothmund, D., Guillod, T., Bortis, D., & Kolar, J. W. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2886139 · Cited by 315
“The simulations include high-frequency effects in the litz wire [32]–[34], the fringing field of the air gap [35], and the effects of the nonsinusoidal magnetic flux by calculating the core losses via iGSE [36].”
MethodLeibl, M., Ortiz, G., & Kolar, J. W. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2623679 · Cited by 306
Artificial Neural Network (ANN) Based Fast and Accurate Inductor Modeling and Design
Guillod, T., Papamanolis, P., & W. Kolar, J. (2020) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2020.3012777 · Cited by 264
“iGSE for core losses, Bessel functions for winding losses) can be used without changing the definition of the output variables [22], [29], [45], [46].”
Method100 kW, 10 kHz Medium-Frequency Transformer Design Optimization and Experimental Verification
Mogorovic, M., & Dujic, D. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2835564 · Cited by 274
“1, the estimation of core loss density is done using the improved generalized Steinmetz’s equation IGSE [6] Pc = 1 T ∫ T 0 ki ∣∣∣∣∣ dB(t) dt ∣∣∣∣∣ α (ΔB)β−αdt (2) where ki = K (2π)α−1 ∫ 2π 0 |cos(θ)|α2β−αdθ (3) which, according to [22], represents the most accurate generalization of the original Steinmetz’s equation t…”
BackgroundMethodInfluentialGuan, Q.-X., Li, C., Zhang, Y., Wang, S., Xu, D. D., Li, W., & Ma, H. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2784821 · Cited by 252
“However, considering the changing voltage–second applied to the inductor because of the ac input voltage variation, the instant value of loss per unit volume PF e ind is calculated by improved general Steinmetz equation [25].”
MethodA Bidirectional Three-Level DC–DC Converter for the Ultracapacitor Applications
Grbovic, P. J., Delarue, P., Le Moigne, P., & Bartholomeus, P. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2038338 · Cited by 248
“where k, α, and β are the material constants, f is the frequency, B is the peak flux density, and B(t) is the instantaneous value of the flux density [34], [35].”
BackgroundHigh-Efficiency Hybrid LLC Resonant Converter for On-Board Chargers of Plug-In Electric Vehicles
Ta, L. A. D., Dao, N. D., & Lee, D.-C. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2968084 · Cited by 228
“eralized Steinmetz equation for nonsinusoidal flux waveforms [38], [39].”
BackgroundOrtiz, G., Biela, J., Bortis, D., & Kolar, J. W. (2010) · The 2010 International Power Electronics Conference - ECCE ASIA - · doi:10.1109/ipec.2010.5542018 · Cited by 229
Combined Phase Shift and Frequency Modulation of a Dual Active Bridge AC-DC Converter with PFC
Jauch, F., & Biela, J. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2515850 · Cited by 229
“In the loss model, the core losses per volume are calculated by applying the improved generalized Steinmetz equation (iGSE) [23].”
MethodMeasurements and Performance Factor Comparisons of Magnetic Materials at High Frequency
Hanson, A. J., Belk, J. A., Lim, S., Sullivan, C. R., & Perreault, D. J. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2514084 · Cited by 225
Self-citationDesign Guidelines for Interleaved Single-Phase Boost PFC Circuits
Nussbaumer, T., Raggl, K., & Kolar, J. W. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2020073 · Cited by 220
“For piecewise linear current curves, the Steinmetz equation can be adapted according to [36] Here, A c stands for the cross-sectional area of the core, and the same factors a and b of the datasheets can be utilized as for (9).”
Overview and Comparison of Iron Loss Models for Electrical Machines
Krings, A., & Soulard, J. (2010) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 221
A Systematic Topology Evaluation Methodology for High-Density Three-Phase PWM AC-AC Converters
Lai, R., Wang, F., Burgos, R., Pei, Y., Boroyevich, D., Wang, B., Lipo, T. A., Immanuel, V. D., & Karimi, K. J. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2005381 · Cited by 210
“2) Stability: Impedance characteristics of the dc link determine the stability of the converter system [23].”
BackgroundGrid-connected isolated PV microinverters: A review
Hasan, R., Mekhilef, S., Seyedmahmoudian, M., & Horan, B. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.082 · Cited by 202
“According to the improved generalized Steinmetz equation, the core losses of any arbitrary waveform during a switching period can be obtained by the following equation [58].”
BackgroundReview of GaN Totem-Pole Bridgeless PFC
University of Texas at Austin, & Huang, Q. (2017) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2017.00018 · Cited by 198
Xue, F., Yu, R., & Huang, A. Q. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2686307 · Cited by 199
“[29] noted that the common method using fundamental harmonic approximation and the Steinmetz equation cannot lead to a good prediction because the rich harmonics in the inductor current generate considerable power loss, which cannot be neglected.”
BackgroundMethodInfluentialOptimum Number of Cascaded Cells for High-Power Medium-Voltage AC–DC Converters
Huber, J. E., & Kolar, J. W. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2605702 · Cited by 191
“HF core losses are considered using the iGSE approach [44], because the core losses of this type of material are quite sensitive to flux components at high frequencies.”
MethodGlobal Loss Evaluation Methods for Nonsinusoidally Fed Medium-Frequency Power Transformers
Villar, I., Viscarret, U., Etxeberria-Otadui, I., & Rufer, A. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2021174 · Cited by 197
Shen, W., Wang, F., Boroyevich, D., & Tipton, C. W. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.911881 · Cited by 190
Impact of Power Density Maximization on Efficiency of DC–DC Converter Systems
Biela, J., Badstuebner, U., & Kolar, J. W. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2006355 · Cited by 187
“The core losses are calculated by the approach presented in [25], which is based on Steinmetz parameter [26] and on the rate of magnetization (dB / dt).”
Methodvan Hoek, H., Neubert, M., & De Doncker, R. W. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2251905 · Cited by 179
Evaluation of Magnetic Materials for Very High Frequency Power Applications
Han, Y., Cheung, G., Li, A., Sullivan, C. R., & Perreault, D. J. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2159995 · Cited by 175
Self-citationCostinett, D., Maksimovic, D., & Zane, R. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2228237 · Cited by 169
“Core losses are calculated according to the NSE/iGSE [22], [23] for both the tank inductance and transformer.”
Method99% Efficient Isolated Three-Phase Matrix-Type DAB Buck–Boost PFC Rectifier
Schrittwieser, L., Leibl, M., & Kolar, J. W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2914488 · Cited by 169
“The transformer’s core losses are calculated using the improved generalized Steinmetz equation (iGSE) [31].”
MethodOptimized design of medium frequency transformers with high isolation requirements
Ortiz, G., Biela, J., & Kolar, J. W. (2010) · IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society · doi:10.1109/iecon.2010.5675240 · Cited by 159
“In the present design procedure, the approach described in [20] is implemented and its application is straightforward since only the sinusoidal Steinmetz parameters along with the voltage waveforms are required for the computation.”
MethodKim, J.-H., Kim, C.-E., Kim, J.-K., Lee, J.-B., & Moon, G.-W. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2462077 · Cited by 159
Tsao, P., Senesky, M., & Sanders, S. R. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.818992 · Cited by 162
Kolar, J. W., Biela, J., & Minibock, J. (2009) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc.2009.5289336 · Cited by 202
Loss modeling of inductive components employed in power electronic systems
Mühlethaler, J., Kolar, J. W., & Ecklebe, A. (2011) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.1109/icpe.2011.5944652 · Cited by 167
“The approach of [9], [10], and [11] leads to the improved Generalized Steinmetz Equation (iGSE)”
BackgroundMethodInfluentialSoeiro, T. B., Mühlethaler, J., Linner, J., Ranstad, P., & Kolar, J. W. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2227897 · Cited by 152
“The core loss, which is a result of hysteresis, eddy current, and stray losses, is calculated by the approach presented by [31], based on the Steinmetz law along with the voltage waveforms.”
MethodAn Improved Empirical Formulation for Magnetic Core Losses Estimation Under Nonsinusoidal Induction
Barg, S., Ammous, K., Mejbri, H., & Ammous, A. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2555359 · Cited by 144
“A simplified form of the IGSE, in case of piecewise linear waveforms given in [14], can be used instead of (6).”
MethodInfluentialA Quadruple Active Bridge Converter for the Storage Integration on the More Electric Aircraft
Buticchi, G., Costa, L. F., Barater, D., Liserre, M., & Amarillo, E. D. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2781258 · Cited by 138
“For the core losses, the generalized Steinmetz equation [16] is used, as presented in (13) and (14).”
MethodGohil, G., Maheshwari, R., Bede, L., Kerekes, T., Teodorescu, R., Liserre, M., & Blaabjerg, F. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2339392 · Cited by 137
“The core losses with the proposed PWM scheme are expected to reduce due to the reduction in both the peak flux linkage and the duration of the core excitation, and it is evaluated using the improved generalized Steinmetz equation [36], [37] given as”
MethodA Weighted-Efficiency-Oriented Design Methodology of Flyback Inverter for AC Photovoltaic Modules
Nanakos, A. C., Tatakis, E. C., & Papanikolaou, N. P. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2182211 · Cited by 135
Single-phase single-stage bidirectional isolated ZVS AC-DC converter with PFC
Jauch, F., & Biela, J. (2012) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/epepemc.2012.6397479 · Cited by 146
“In the loss model, the core losses per volume are calculated by applying the improved Generalized Steinmetz Equation (iGSE) [21].”
MethodCao, Y., Ngo, M., Yan, N., Dong, D., Burgos, R. P., & Ismail, A. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3108717 · Cited by 135
“The core and winding losses are swept to determine the optimal number of turns for the TMP primary sides NP,MP. Winding and core loss are calculated using the improved general Steinmetz equation (IGSE) [32] and square field derivative (SFD) [33].”
MethodGarcia-Bediaga, A., Villar, I., Rujas, A., Mir, L., & Rufer, A. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2574499 · Cited by 126
“Due to the proliferation of power electronics based systems, and being aware of the lack of expressions for nonsinusoidal magnetization cases, the Improved Generalized Steinmetz Equation [30] is applied within this design methodology to obtain the magnetic specific core loss expression Ps Ps = 1 T ∫ T 0 ki ∣ ∣ ∣ ∣ dB(…”
MethodA Systematic Approach to Modeling Impedances and Current Distribution in Planar Magnetics
Chen, M., Araghchini, M., Afridi, K. K., Lang, J. H., Sullivan, C. R., & Perreault, D. J. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2411618 · Cited by 128
Self-citationPark, Y., Chakraborty, S., & Khaligh, A. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3121172 · Cited by 118
“Pcore is calculated using the improved generalized Steinmetz equation [36], while Pwindings and Pcond are obtained using FEA-derived Rac and switch datasheet-derived Rds,ON, respectively, in conjunction with corresponding analytically calculated rms values of currents.”
MethodDesign and Optimization of a 200-kW Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters
Guo, Z., Yu, R., Xu, W., Feng, X., & Huang, A. Q. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3059879 · Cited by 115
“8 presents the core loss estimation results using OSE, MSE, GSE, and IGSE methods.”
MethodPower Losses Models for Magnetic Cores: A Review
Rodriguez-Sotelo, D., Rodríguez, M., Araujo-Vargas, I., Prado-Olivarez, J., Gutiérrez, A. I. B., & Pérez-Pinal, F. J. (2022) · Micromachines · doi:10.3390/mi13030418 · Cited by 125
“The result was the developing Modified Steinmetz Equation(MSE) [108], General Steinmetz Equation (GSE) [109], Doubly Improved Steinmetz Equation (Improved-Improved Steinmetz Equation, i2GSE) [110], Natural Steinmetz Equation (NSE) [85], and WaveformCoefficient Steinmetz Equation (WcSE) [111].”
InfluentialChen, T., Yu, R., & Huang, A. Q. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3181349 · Cited by 114
“Steinmetz equation (iGSE) [24] is used.”
A compact, high voltage 25 kW, 50 kHz DC-DC converter based on SiC JFETs
Aggeler, D., Biela, J., & Kolar, J. W. (2008) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2008.4522813 · Cited by 112
“with the loss model presented in [3], which is based on data sheet values.”
Method99.3% Efficient Three-Phase Buck-Type All-SiC SWISS Rectifier for DC Distribution Systems
Schrittwieser, L., Leibl, M., Haider, M., Thony, F., Kolar, J. W., & Soeiro, T. B. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2817074 · Cited by 108
“metz equation [34].”
Kang, S. H., Maksimović, D., & Cohen, I. J. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2186590 · Cited by 105
“The core losses are calculated using the improved generalized Steinmetz equation, which allows for arbitrary (nonsinusoidal) waveforms [33].”
MethodCore losses under DC bias condition based on Steinmetz parameters
Mühlethaler, J., Biela, J., Kolar, J. W., & Ecklebe, A. (2010) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2010.5542385 · Cited by 105
“The approach of [8], [9], and [10] leads to the improved generalized Steinmetz equation (iGSE)”
BackgroundMethodInfluentialEMI Filter Volume Minimization of a Three-Phase, Three-Level T-Type PWM Converter System
Boillat, D. O., Krismer, F., & Kolar, J. W. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2617085 · Cited by 104
“The core losses Pfe are computed with the improved Generalized Steinmetz Equation (iGSE) [20], which is evaluated for”
MethodWhy MagNet: Quantifying the Complexity of Modeling Power Magnetic Material Characteristics
Serrano, D., Li, H., Wang, S., Guillod, T., Luo, M., Bansal, V., Jha, N. K., Chen, Y., Sullivan, C. R., & Chen, M. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3291084 · Cited by 102
Self-citationSensitivity Analysis of Medium-Frequency Transformer Designs for Solid-State Transformers
Mogorovic, M., & Dujić, D. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2883390 · Cited by 105
“Core losses [19], mass, and volume calculation is performed and finally the hot-spot temperatures are generated utilizing a sophisticated thermal network model [4].”
MethodAnalysis Model for Magnetic Energy Harvesters
Moon, J., & Leeb, S. B. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2357448 · Cited by 101
“Among many techniques to estimate core loss at given frequency and BPEAK level [17], [18], [19], [20], [21], our core loss model is based on a simple expression of [17] due to zero DC-bias and symmetric B-H loop operations centered”
MethodShen, Y., Chub, A., Wang, H., Vinnikov, D., Liivik, E., & Blaabjerg, F. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2831643 · Cited by 103
“improved generalized Steinmetz equation [42] describes core loss, and the winding loss can be obtained with the Dowell model [43], [44].”
A new core loss model for rectangular AC voltages
Mu, M., & Lee, F. C. (2014) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2014.6954116 · Cited by 97
Optimum Design of a Multiple-Active-Bridge DC–DC Converter for Smart Transformer
Costa, L. F., Buticchi, G., & Liserre, M. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2799680 · Cited by 101
“For the core losses, the generalized Steinmetz equation [21] is used.”
MethodCosta, L. F., Hoffmann, F., Buticchi, G., & Liserre, M. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2818658 · Cited by 104
“For the core losses, the generalized Steinmetz equation [18] is used, as presented in”
MethodEffect of Dielectric Relaxation of Epoxy Resin on Dielectric Loss of Medium-Frequency Transformer
Wu, Z., Lin, B., Fan, J., Zhao, J., Zhang, Q., & Li, L. (2022) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/tdei.2022.3193652 · Cited by 97
“The calculation methods of the winding and core losses 202 can refer to [7]–[9], [29].”
MethodYue, S., Li, Y., Yang, Q., Yu, X., & Zhang, C. (2018) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2018.2842064 · Cited by 95
“In recent years, many other calculation methods based on SE, including the modified SE (MSE) [2], the generalized SE (GSE) [3], the improved SE (IGSE) [4], and the waveform coefficient SE (WcSE) [5], have been developed for nonsinusoidal excitations.”
MethodBadstuebner, U., Biela, J., Christen, D., & Kolar, J. W. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2103536 · Cited by 94
“The core losses are calculated by the approach shown in [18], based on the Steinmetz parameters [19] and the rate of magnetization (dB/dt).”
MethodIron Loss Analysis of Doubly Salient Brushless DC Generators
Zhang, Z., Yu, L., Sun, L., Qian, L., & Huang, X. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2349875 · Cited by 92
“In order to predict the iron loss of the DSEG accurately, the harmonic effects and minor hysteresis loops need to be taken into account [13]–[15].”
BackgroundOptimal design of a 5kW/dm3 / 98.3% efficient TCM resonant transition single-phase PFC rectifier
Biela, J., Hassler, D., Minibock, J., & Kolar, J. W. (2010) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2010.5542042 · Cited by 92
“The core losses are calculated with the approach presented in [23] and for the winding losses also the skin and the proximity effect losses are included.”
MethodIron Losses in a Medium-Frequency Transformer Operated in a High-Power DC–DC Converter
Soltau, N., Eggers, D., Hameyer, K., & Doncker, R. W. D. (2014) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2013.2283733 · Cited by 92
“As the flux curves are nonsinusoidal but free from dc offsets, the improved generalized Steinmetz equation (iGSE) [8] is used to validate the core losses.”
BackgroundMethodInfluentialEvaluation of DC Collector-Grid Configurations for Large Photovoltaic Parks
Siddique, H. A. B., & Doncker, R. W. D. (2017) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2017.2702018 · Cited by 89
Matsumori, H., Shimizu, T., Takano, K., & Ishii, H. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2453055 · Cited by 88
“Brockmeyer and coworkers proposed an iron loss calculation method for an arbitrarily shaped magnetizing waveform [5], [6], and Sullivan and coworkers proposed the following improved generalized Steinmetz equation (iGSE) in order to adapt to the triangular magnetizing waveform condition [7]:”
MethodDesign and Implementation of a GaN-Based, 100-kHz, 102-W/in3Single-Phase Inverter
Zhao, C., Trento, B., Jiang, L., Jones, E. A., Liu, B., Zhang, Z., Costinett, D. J., Wang, F., Tolbert, L. M., Jansen, J. F., et al. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2573758 · Cited by 106
“1) Ferroxcube EE cores are picked as a reference for all inductor designs, and the core loss is calculated using the iGSE method [24].”
MethodZhao, S., Chen, Y., Cui, S., Mortimer, B. J., & Doncker, R. W. D. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3041721 · Cited by 87
“The transformers are characterized by U-cores of ferrite N87 material, and the core losses are calculated based on the improved generalized Steinmetz equation [22].”
MethodCore loss predictions for general PWM waveforms from a simplified set of measured data
Sullivan, C. R., Harris, J. H., & Herbert, E. A. (2010) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2010.5433375 · Cited by 87
“(13) in [6]) includes a factor that depends on the total flux excursion as well as the flux change for a given pulse, and it may be necessary to introduce similar factors to accurately model losses in such cases using square-wave loss data.”
BackgroundMethodResultInfluentialSelf-citationLi, C., Zhang, Y., Cao, Z., & XU, D. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2623771 · Cited by 86
A high power density single phase PWM rectifier with active ripple energy storage
Wang, R., Wang, F., Boroyevich, D., & Ning, P. (2010) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2010.5433409 · Cited by 85
Single-Phase Bridgeless PFC Topology Derivation and Performance Benchmarking
Chen, Z., Davari, P., & Wang, H. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2970005 · Cited by 85
“Regarding the core losses Pcore,L, it is calculated by improved generalized Steinmetz equation (iGSE) [46].”
MethodDesign and Implementation of a Two-Channel Interleaved Vienna-Type Rectifier With >99% Efficiency
Wang, Q., Zhang, X., Burgos, R. P., Boroyevich, D., White, A. M., & Kheraluwala, M. H. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2671844 · Cited by 92
“One of the most accurate models so far analyzing the switching behavior of this device in great detail is derived in [28].”
BackgroundLi, Z. (2022) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2022.00033 · Cited by 93
“Therefore, [36] divides the magnet ic flux waveform into the major loop and the minor loop and calculates the loss of the major loop and each minor loop respectively.”
A 1-MHz Series Resonant DC–DC Converter With a Dual-Mode Rectifier for PV Microinverters
Shen, Y., Wang, H., Shen, Z., Yang, Y., & Blaabjerg, F. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2876346 · Cited by 88
“sity can be calculated with the improved generalized Steinmetz equation [62]”
MethodA Low-Loss Inductor Structure and Design Guidelines for High-Frequency Applications
Yang, R. S., Hanson, A. J., Reese, B. A., Sullivan, C. R., & Perreault, D. J. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2892397 · Cited by 87
“Much research has also focused on modeling, ranging from finite element analysis (FEA) in-the-loop optimization [11] to analytical models of conductor loss [12]–[17] and core loss [18], [19], with some work targeting the HF range [20].”
BackgroundSelf-citationHu, J., Yang, Z., Cui, S., & Doncker, R. W. D. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3055369 · Cited by 82
“can be estimated by the improved generalized Steinmetz’s equation (iGSE) [40], [41].”
BackgroundMagambo, J. S. N. T., Bakri, R., Margueron, X., Moigne, P. L., Mahe, A., Guguen, S., & Bensalah, T. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2686327 · Cited by 89
“For nonsinusoidal power electronic waveforms, the improved general Steinmetz’s equation [61], [62] is preferred”
Design of a Highly efficient bidirectional isolated LLC resonant converter
Hillers, A., Christen, D., & Biela, J. (2012) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/epepemc.2012.6397282 · Cited by 80
“The core losses are calculated with the improved generalized steinmetz equation (IGSE) [16].”
MethodHigh-Frequency Power Transformers With Foil Windings: Maximum Interleaving and Optimal Design
Barrios, E. L., Urtasun, A., Ursúa, A., Marroyo, L., & Sanchis, P. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2368832 · Cited by 84
“For typical HF power transformer applications, in which the voltage applied is rectangular in form, with or without zero voltage periods, the modified Steinmetz equation (MSE) [16], the improved generalized Steinmetz equation (iGSE) [17], and the improved iGSE (i2GSE) [18] have been shown to be accurate core loss empi…”
MethodHuang, P., Mao, C., Wang, D., Wang, L., Duan, Y., Qiu, J., Xu, G., & Cai, H. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2674591 · Cited by 78
“For piecewise flux densities, simplifies to [29]”
MethodDielectric Losses in Dry-Type Insulation of Medium-Voltage Power Electronic Converters
Guillod, T., Färber, R., Rothmund, D., Krismer, F., Franck, C. M., & Kolar, J. W. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2914997 · Cited by 82
“The winding losses (skin and proximity effects) are computed according to [12], the core losses (improved generalized Steinmetz equation with measured Steinmetz parameters) according to [55], and the dielectric losses (smallsignal frequency domain measurements of the complex permittivity with disc-shaped specimens) ac…”
Ouyang, Z., Sen, G., Thomsen, O. C., & Andersen, M. A. E. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2186777 · Cited by 81
“When a core operates under dc bias condition, the core loss still can be described using the Steinmetz equation (12) or the IGSE (13).”
BackgroundInfluentialKimura, S., Itoh, Y., Martinez, W. H., Yamamoto, M., & Imaoka, J. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2539920 · Cited by 84
“improved generalized Steinmetz equation (iGSE) [33].”
Aarninkhof, B. O., Lyu, D., Soeiro, T. B., & Bauer, P. (2023) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2023.3279211 · Cited by 81
“…the airgap length and the magnetizing inductance can be approximated by the following equation : The winding losses are calculated in MATLAB based on the procedure described by Mühlethaler [24], and the core losses are calculated using the improved generalized steinmetz equation (iGSE) [24], [65].”
MethodMukherjee, S., Kumar, A., & Chakraborty, S. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3019796 · Cited by 76
“Core losses are modeled using the iGSE [49].”
MethodChen, J., Sha, D., Zhang, J., & Liao, X. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2874036 · Cited by 78
McLaughlin, P. H., Rentmeister, J. S., Kiani, M. H., & Stauth, J. T. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3017123 · Cited by 73
“Details of the design framework for inductors with magnetic cores are presented in [1], where a similar optimization technique is used and inductor losses are modeled using the improved generalized Steinmetz equation [37].”
MethodDesign of an 99%-efficient, 5kW, phase-shift PWM DC-DC converter for telecom applications
Badstuebner, U., Biela, J., & Kolar, J. W. (2010) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2010.5433582 · Cited by 73
“With the extended Steinmetz formula in [7], the core losses can be determined:”
BackgroundDirect instantaneous torque and force control: a control approach for switched reluctance machines
Klein‐Hessling, A., Hofmann, A., & Doncker, R. W. D. (2016) · IET Electric Power Applications · doi:10.1049/iet-epa.2016.0515 · Cited by 73
Awasthi, A. K., Bagawade, S., & Jain, P. K. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3046560 · Cited by 72
Mocevic, S., Yu, J., Xu, Y., Stewart, J., Wang, J., Cvetkovic, I., Dong, D., Burgos, R. P., & Boroyevich, D. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.2995386 · Cited by 71
Magnetic Losses in Soft Ferrites
Dobák, S., Beatrice, C., Tsakaloudi, V., & Fiorillo, F. (2022) · Magnetochemistry · doi:10.3390/magnetochemistry8060060 · Cited by 71
A Practical Transformer Core Loss Measurement Scheme for High-Frequency Power Converter
Han, Y., & Liu, Y. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.896154 · Cited by 71
“They are nonsinusoidal waveforms [7]–[ 9 ] and may contain dc bias in the magnetizing current to premagnetize the core [10]–[13].”
BackgroundZou, S., Lu, J., Mallik, A., & Khaligh, A. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2804328 · Cited by 74
“2804328 In majority of previous studies for modeling magnetics and losses, the core losses are usually obtained by Steinmetz equation [2], with empirical coefficients provided by the magnetic manufacturers.”
Background
Metadata
- Authors
- Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H.
- Affiliations
- Dartmouth College (US)
- Universidad de Buenos Aires (AR)
- Venue
- 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings.
- Publisher
- IEEE
- Published
- 2003-06-26
- Pages
- 36-41
- ISSN
- 2151-0997 (ISSN-L)
- OpenAlex
- W2109185194
- Cited by
- 1,145
- References
- 23
- Citations by year
- 2026: 49 · 2025: 76 · 2024: 105 · 2023: 82 · 2022: 99 · 2021: 85 · 2020: 104 · 2019: 86 · 2018: 66 · 2017: 67 · 2016: 57 · 2015: 45 · 2014: 47 · 2013: 40 · 2012: 33
- FWCI
- 5.50
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE ... Workshop on Control and Modeling for Power Electronics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Magnetic Properties and Synthesis of Ferrites
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Keywords
- non-sinusoidal waveforms, hysteresis loss, recursive algorithm, magnetic materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.