Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
An improved calculation of ferrite core loss for nonsinusoidal waveforms separates a flux trajectory into major and minor loops via a new recursive algorithm. It is highly accurate and outperforms two previous methods for our measured data. The only characteristics of the material required are the standard Steinmetz-equation parameters.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
General properties of power losses in soft ferromagnetic materials
Bertotti, G. (1988) · IEEE Transactions on Magnetics · doi:10.1109/20.43994 · Cited by 2,162 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Mathematical models of hysteresis
Mayergoyz, I. (1986) · IEEE Transactions on Magnetics · doi:10.1109/tmag.1986.1064347 · Cited by 1,166
[Mathematical models of hysteresis]
Mayergoyz, I. D. (1991) · doi:10.2172/6911694 · Cited by 708
Soft Ferrites—Properties and Applications
Brailsford, F. (1970) · Electronics and Power · doi:10.1049/ep.1970.0192 · Cited by 613
Improved calculation of core loss with nonsinusoidal waveforms
Li, J., Abdallah, T., & Sullivan, C. R. (2002) · Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248) · doi:10.1109/ias.2001.955931 · Cited by 531 · cited 10×
“In [6], the MSE and GSE are compared with experimental data, and while both provide a vastly better approximation than the basic Steinmetz equation (1), and the GSE avoids some problems exhibited in the MSE, each has significant error in at least one region.”
BackgroundMethodResultInfluentialSelf-citation(1998) · doi:10.1016/b978-0-12-093270-2.x5048-x · Cited by 487
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation
Reinert, J., Brockmeyer, A., & De Doncker, R. W. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.806023 · Cited by 409 · cited 4×
“The consideration of these Axioms 1 and 2 allows one to see that the MSE [5] and the model in [20] cannot be expected to work well for truly general consideration of many different possible waveforms; the problems with the MSE were confirmed experimentally in [5].”
BackgroundMethodInfluentialSteinmetz, C. P. (1892) · Transactions of the American Institute of Electrical Engineers · doi:10.1109/t-aiee.1892.5570437 · Cited by 407 · cited 1×
“A similar equation, but without the frequency dependence, was proposed by Steinmetz in 1892 [3], and so (1) is often referred to as the Steinmetz equation.”
BackgroundAn improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform
Fiorillo, F., & Novikov, A. (1990) · IEEE Transactions on Magnetics · doi:10.1109/20.104905 · Cited by 382 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Albach, M., Durbaum, T., & Brockmeyer, A. (2002) · PESC Record. 27th Annual IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1996.548774 · Cited by 225
Research works printed but not linked: 4
- vorperian, 2002, Using fractals to model eddy-current losses in ferromagnetic materials, Switching power Magazine, 3, 18
- mulder, 1995, Power ferrite loss formulas for transformer design, Powerconversion and Intelligent Motion, 21, 22
- 2000, MATLAB Version 6
- ridley, 2002, Modeling ferrite core losses, Switching power Magazine, 3, 6
Cited by
Items 301–400 of 1,000
Frequency-Dependent Inductance and Winding Loss Model for Gapped Foil Inductors
Ewald, T., & Biela, J. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3169620 · Cited by 23
Core‐loss calculation in different parts of induction motor
Roy, R., Prabhakar, K. K., & Kumar, P. (2017) · IET Electric Power Applications · doi:10.1049/iet-epa.2017.0369 · Cited by 21
“Furthermore, an improved method of GSE (IGSE) using minor loop is proposed in [26].”
MethodTransient Core-Loss Simulation for Ferrites With Nonuniform Field in SPICE
Cui, H. H., & Ngo, K. D. T. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2812856 · Cited by 21
“Therefore, many improved models to solve this issue have been developed, such as MSE [23], GSE [24], iGSE [25], DNSE [26], WcSE [27], i2GSE [28], SPG [29], etc.”
MethodRafi, M. A. H., & Bauman, J. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3231554 · Cited by 20
State of art survey for design of medium frequency high power transformer
Vaisambhayana, S., Dincan, C. G., Shuyu, C., Tripathi, A., Tian, H., & Karthikeya, B. R. (2016) · Asian Conference on Energy, Power and Transportation Electrification (ACEPT) · doi:10.1109/acept.2016.7811550 · Cited by 22
“To correct the mismatch in GSE, the improved generalized Steinmetz equation (IGSE) was derived for core loss calculation[14].”
MethodComponent design and implementation of a 60 kW full SiC traction inverter with boost converter
Merkert, A., Müller, J., & Mertens, A. (2016) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2016.7854947 · Cited by 20
“The core loss was estimated with the iGSE approach from [9] being used at each core element of the 2D-FEM Model.”
MethodSaeed, S., García, J., Perdigão, M. S., Costa, V. S., Baptista, B., & Mendes, A. M. S. (2020) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2020.3047593 · Cited by 20
“the improved generalized Steinmetz equation (iGSE) [43]–[45].”
Bi-objective sizing optimization of power converter using genetic algorithms
Mejbri, H., Ammous, K., Abid, S., Morel, H., & Ammous, A. (2013) · COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering · doi:10.1108/compel-03-2012-0029 · Cited by 20
Efficiency characterization and optimization in flyback DC-DC converters
Kang, S. H., Nguyen, H. M., Maksimović, D., & Cohen, I. J. (2010) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2010.5617976 · Cited by 20
“The core losses are calculated using the improved generalized Steinmetz equation (iGSE), which allows for arbitrary (non-sinusoidal) waveforms [ 24 ].”
MethodA Low Loss Orthogonal Decoupling Magnetic Integrated Structure for Dual Active Bridge Converter
Cao, Z., Chen, W., Shen, Z., Chen, Y., Jin, L., Ma, D., & Zou, B. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3133068 · Cited by 19
“Therefore, the improved generalized Steinmetz equation (IGSE) is used for the core loss calculation [26].”
MethodVo, A.-T., Fassenet, M., Préault, V., Espanet, C., & Kedous‐Lebouc, A. (2022) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2022.169935 · Cited by 19
166 kW Liquid-Insulated Medium-Frequency Transformer With Hybrid Foil-Litz Windings
Cremasco, A., Rothmund, D., Milone, M., Mokkapaty, S., & Lomonova, E. A. (2024) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2024.3354807 · Cited by 19
“(cid:2) The core losses are predicted with the improved generalized Steinmetz equation (iGSE) [38], including the thermal dependency by the method presented in [39].”
MethodDual-Transformer-Based DAB Converter With Controllable Integrated Inductances
Guo, J., Wang, H., Xu, G., Han, H., & Su, M. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3366762 · Cited by 20
“The volume of the UI core is calculated as The core loss can be calculated as The core loss density P V can be calculated using the methods of the improved generalized Steinmetz equation (iGSE), in which the parameters α and β are provided by the core man-ufacturer [38].”
MethodYu, G., Yadav, S., Dong, J., & Bauer, P. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3382051 · Cited by 20
“…due to the nonsinusoidal inductor current waveform, the improved generalized Steinmetz equation (iGSE) [22] is adopted, which is expressed as where k , α , and β are the Steinmetz coefficients, Δ B is the peak-to-peak flux density, V e is the core volume and k i can be calculated from (32) [22].”
MethodShen, X., Zuo, Y., & Martinez, W. H. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3397041 · Cited by 19
“Methods of magnetic loss modeling can be categorized as iron loss separation [12], Steinmetz equation (SE) families [13], [14], [15], [16], [17], [18], [19], and BH curve-based models [20].”
BackgroundMethodA Review on the Empirical Core Loss Models for Symmetric Flux Waveforms
Barg, S., Barg, S., & Bertilsson, K. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3474520 · Cited by 19
Liu, Z., Zhu, L., Dang, Y., & Ji, S. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3566383 · Cited by 19
Modelling and ZVS control of an isolated three-phase bidirectional AC-DC converter
Jauch, F., & Biela, J. (2013) · 2013 15th European Conference on Power Electronics and Applications (EPE) · doi:10.1109/epe.2013.6634323 · Cited by 19
“In the loss model, the core losses per volume are calculated by applying the improved Generalized Steinmetz Equation (iGSE) [13].”
MethodPredicting Core Losses Under the DC Bias Based on the Separation Model
Zhou, Y., Qimi, C., & Jun-bo, Z. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2664882 · Cited by 19
Optimized design for three port transformer considering leakage inductance and parasitic capacitance
Chattopadhyay, R., Juds, M. A., Gohil, G., Gulur, S., Ohodnicki, P. R., & Bhattacharya, S. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8096588 · Cited by 19
“The core loss for three port transformer is derived here using iGSE method[15] as a function of operating phase shift angles φpv and φes.”
MethodNovel Isolated Bidirectional Integrated Dual Three-Phase Active Bridge (D3AB) PFC Rectifier
Krismer, F., Hatipoglu, E., & Kolar, J. W. (2018) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec.2018.8507362 · Cited by 19
“The employed component model calculates the core losses with the improved Generalized Steinmetz Equation (iGSE) [18] and the Steinmetz parameters k = 1.”
MethodElectromagnetic Mass and Efficiency of Magnetic Gears for Electrified Aircraft
Tallerico, T., Scheidler, J. J., & Cameron, Z. A. (2019) · AIAA Propulsion and Energy Forum · doi:10.2514/6.2019-4475 · Cited by 19
Direct in-situ Measurement of Magnetic Loss in Power Electronic Circuits
Yi, L., & Moon, J. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3015182 · Cited by 19
“There have been efforts to enhance the accuracy of the original Steinmetz, notably modified Steinmetz equation [4], generalized Steinmetz equation [5], improved generalized Steinmetz equation [6], etc.”
MethodEfficiency Optimization of Dual Active Bridge DC– DC Converter with Triple Phase-Shift Control
Jean-Pierre, G., Altın, N., Shafei, A. E., & Nasiri, A. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9235620 · Cited by 19
“Due to the non-sinusoidal waveform characteristic for the given applications, the Improved Generalized Steinmetz Equation (IGSE) [16] is used to obtain the closed form expression for the core loss.”
MethodFlux-Map Based FEA Evaluation of Synchronous Machine Efficiency Maps
Ferrari, S., Ragazzo, P., Dilevrano, G., & Pellegrino, G. (2021) · IEEE Workshop on Electrical Machines Design, Control and Diagnosis · doi:10.1109/wemdcd51469.2021.9425678 · Cited by 19
“The selected approach is to apply the improved Generalized Steinmetz Equation (iGSE) formulation [14] at the two components of the flux density (radial and tangential) of each mesh element, and then sum all the contributions.”
MethodAkbar, S. M., Hasan, A., Watson, A. J., & Wheeler, P. W. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3148355 · Cited by 19
Klein‐Hessling, A., Burkhart, B., Scharfenstein, D., & Doncker, R. W. D. (2014) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2014.7013950 · Cited by 19
“With resulting flux density B (B = flux Φ / Area A) in each section the specific losses Psp,fe are determined using the improved Generalized Steinmetz Equation (iGSE) [8].”
MethodLenke, R. U., Rohde, S., Mura, F., & Doncker, R. W. D. (2009) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2009.5316134 · Cited by 19
“Generalized Steinmetz Equation (IGSE, [20]).”
Predicting Iron Losses in Laminated Steel with Given Non-Sinusoidal Waveforms of Flux Density
Chen, W., Ma, J., Huang, X., & Fang, Y. (2015) · Energies · doi:10.3390/en81212384 · Cited by 19
Stepaniak, M. J. (2008) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 19
A Switched Capacitor and Autotransformer Hybrid Converter with DC Current in the Windings
Li, C., & Cobos, J. A. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3104942 · Cited by 21
“The core losses are calculated by the Steinmetz equation [53].”
MethodIntegrated Inductor Design for a Highly Compact Embedded Battery Charger
Sanusi, B. N., & Ouyang, Z. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3156372 · Cited by 18
“From consideration of accuracy and required measurements, the improved generalized Steinmetz equation (iGSE) method [32] is used to estimate core loss.”
MethodHu, Y., Xu, J. J., Wang, J., & Xu, W. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3403708 · Cited by 22
“Due to the characteristics of high-power dissipation and large volume, the designs of magnetic components are essential to improve system effi-ciency, structure lightweight, and reduce energy consumption [4], [5].”
BackgroundLi, Z., Pei, Y., Liu, J., Wang, L., & Leng, Z. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3515472 · Cited by 18
“The formula of the iGSE is given by the following [31]: where T is the period of the excitation, B ( t ) is the instantaneous flux density, and Δ B is the peak-to-peak value of B ( t ).”
Design Methodology of Resonant Inductor in a ZVS Inverter
Du, C., Hurley, W. G., & Xu, D. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2015.2460996 · Cited by 18
A systematic approach to modeling impedances and current distribution in planar magnetics
Chen, M., Araghchini, M., Afridi, K. K., Lang, J. H., Sullivan, C. R., & Perreault, D. J. (2014) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2014.6877143 · Cited by 18
Self-citationStatistical Study of Nanocrystalline Alloy Cut Cores From Two Different Manufacturers
Sixdenier, F., Morand, J., Aviñó-Salvadó, O., & Bergogne, D. (2014) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2013.2285274 · Cited by 18
“We use the improved iGSE model presented in [10] which has recently been improved in [11] to consider relaxation effects.”
MethodCore loss calculation for magnetic materials employed in SMPS under rectangular voltage excitations
Yue, S., Yang, Q., Li, Y., & Zhang, C. (2018) · AIP Advances · doi:10.1063/1.5007201 · Cited by 18
A Practical Core Loss Estimation Method for Three-Phase Three-Level Grid-Connected Inverters
Zhao, R., Wang, C., Loh, P. C., Yan, Q., Xu, H., & Blaabjerg, F. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2943875 · Cited by 19
Core loss separation model under square voltage considering DC bias excitation
Sun, H., Li, Y., Lin, Z., Zhang, C., & Yue, S. (2020) · AIP Advances · doi:10.1063/1.5131561 · Cited by 18
An LLC Resonant Single-Stage Inverter With High-Frequency Link and Soft-Switching
Gao, J., Zhang, J., Song, Q., Zhu, Z., & Qian, L. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3123345 · Cited by 18
Weight and efficiency optimization strategy of an interleaved DC-DC converter for a solar aircraft
Louvrier, Y., Barrade, P., & Rufer, A. C. (2009) · Infoscience (Ecole Polytechnique Fédérale de Lausanne) · Cited by 18
Stojadinović, M., & Biela, J. (2015) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2015.7309435 · Cited by 18
“Core Power Losses: For calculating the core losses the Improved Generalized Steinmetz Equation (iGSE) procedure presented in [16] has been used.”
MethodA High-Density Single-Turn Inductor for a 6 kV SiC-based Power Electronics Building Block
Song, H., Wang, J., Xu, Y., Burgos, R. P., & Boroyevich, D. (2020) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec39645.2020.9124170 · Cited by 19
“Given the current profile in Section I, iGSE is employed to calculate the core loss [21].”
MethodInductor Design Methods With Low-Permeability RF Core Materials
Han, Y., & Perreault, D. J. (2012) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2012.2209192 · Cited by 18
Azaioud, H., Claeys, R., Knockaert, J., Vandevelde, L., & Desmet, J. (2021) · Energies · doi:10.3390/en14051420 · Cited by 17
“The calculation of these losses is based on the approach of the generalised Steinmetz equation and is calculated per volume unit [35].”
MethodSapkota, D. B., Neupane, P., Joshi, M., & Khan, S. (2024) · IET Power Electronics · doi:10.1049/pel2.12704 · Cited by 17
Multi-Objective Optimization and Comparison of DC/DC Converters for Offshore Wind Turbines
Timmers, V. R. J. H., Egea‐Àlvarez, A., Gkountaras, A., & Xu, L. (2024) · IEEE Access · doi:10.1109/access.2024.3411152 · Cited by 17
“This is defined as [50] where B is the instantaneous magnetic flux density, ´ B is the peak-to-peak magnetic flux density, and k i is calculated using where k , α , and β are the Steinmetz parameters of the iron core material.”
MethodOn Low-Voltage DC Network Customer-End Inverter Energy Efficiency
Lana, A., Mattsson, A., Nuutinen, P., Peltoniemi, P., Kaipia, T., Kosonen, A., Aarniovuori, L., & Partanen, J. (2014) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2014.2345022 · Cited by 18
“Core losses produced by material magnetization are divided into major loop losses from the fundamental 50 Hz magnetization, and minor loop losses from the magnetization at the switching frequency [25].”
BackgroundLoss reduction of laminated core inductor used in on-board charger for EVs
Tera, T., Taki, H., & Shimizu, T. (2014) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2014.6869691 · Cited by 17
A Power Supply Achieving Titanium Level Efficiency for a Wide Range of Input Voltages
Konrad, W., Deboy, G., & Muetze, A. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2532962 · Cited by 18
“The inductor core losses were calculated with the improved generalized Steinmetz equation (iGSE) formula [22]–[24], see”
MethodError analysis of high frequency core loss measurement for low-permeability low-loss magnetic cores
Javidi, N. F., & Nymand, M. (2016) · IEEE Annual Southern Power Electronics Conference · doi:10.1109/spec.2016.7846098 · Cited by 17
Yu, X., Su, J., Lai, J., & Guo, S. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2953101 · Cited by 21
3-phase medium frequency transformer for a 100kW 1.2kV 20kHz Dual Active Bridge converter
Dworakowski, P., Wilk, A., Michna, M., Lefebvre, B., & Lagier, T. (2019) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2019.8926695 · Cited by 18
“In [26] it was proposed a modification of the power loss formula for non-sinusoidal excitations but still using the Steinmetz coefficients only.”
MethodHane, Y., & Nakamura, K. (2022) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2022.3145101 · Cited by 17
Core Loss Calculation of Symmetric Trapezoidal Magnetic Flux Density Waveform
Barg, S., & Bertilsson, K. (2021) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2021.3133929 · Cited by 17
Aguglia, D., & Neuhaus, M. (2013) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2013.6631889 · Cited by 17
Optimal constant-flux-inductor design for a 5 kW boost converter
Xu, D., & Ngo, K. D. T. (2013) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2013.6520637 · Cited by 17
Core Materials for High Frequency VRM Inductors
Kelly, S. C., Collins, C., Duffy, M. C., Rhen, F. M. F., & Roy, S. (2007) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2007.4342267 · Cited by 17
Yue, S., Yang, Q., Li, Y., Zhang, C., & Xu, G. (2017) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2017.8056411 · Cited by 17
500kVA Hybrid Solid State Transformer (HSST): Design and Implementation of the SST
Rajendran, S., Sen, S., Zhang, L., Guo, Z., Huang, Q., & Huang, A. Q. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9235804 · Cited by 18
Rigbers, K., Thomas, S., Boke, U., & Doncker, R. D. (2006) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2006.256764 · Cited by 18
“Nw * Aore (61) The Improved Generalized Steinmetz Equation (IGSE) has been published in [8] and follows the idea of the Modified Steinmetz Equation [9] to use the dBldt of each magnetization cycle for calculating the core losses.”
MethodA comprehensive design for high power density common mode EMI inductor
Fang, L., Boroyevich, D., Mattevelli, P., & Gazel, N. (2011) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2011.6064012 · Cited by 17
“INTRODUCTION CM chokes take a significant portion of EMI filter total volume and weight [1-6].”
BackgroundMethodCore loss estimation of high speed electric machines: An assessment
Choi, W., Li, S., & Sarlioglu, B. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6699556 · Cited by 17
“There are two other modified models use the Steinmetz equation parameters, but with extended calculations to address arbitrary waveforms: the modified Steinmetz equation (MSE) [39-42] and the generalized Steinmetz equation (GSE) [42-44].”
MethodA Three-Phase Isolated Building Block for High-Power Medium-Voltage Grid Applications
Gomez, R. A., Porras, D. A., Oggier, G. G., Balda, J. C., & Zhao, Y. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3311775 · Cited by 16
“The improved Generalized Steinmetz Equation (iGSE) [52] given in (1) is well accepted and commonly used to approximate the core loss due to nonsinusoidal excitations [46], [51], [53], [54], [55] where Using the flux density waveform due to the three-phase inverter voltage excitation waveform shown…”
BackgroundIron loss calculation of AC filter inductor for three phase PWM inverter
Matsumori, H., Shimizu, T., Takano, K., & Ishii, H. (2012) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342340 · Cited by 16
“The improved generalized Steinmetz equation (iGSE) is proposed in order to adapt to the triangular magnetizing waveform condition, as is shown in (2) [1,2] : 1 ΔB t 2”
MethodJafari, M., Malekjamshidi, Z., & Zhu, J. G. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.124 · Cited by 17
“The experimental results are compared with the analytical calculations using three empirical loss calculation methods, OSE, IGSE and WcSE as presented in Fig.19 (a).”
MethodInfluentialAntonio, S. Q., Faba, A., Rimal, H. P., & Cardelli, E. (2020) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2019.2959213 · Cited by 16
“2959213 An example of that is the so-called Steinmetz Monomial Equation (SME), named elsewhere (erroneously) as “Steinmtez Equation,” and its extensions are the “Modified Steinmetz Equation” (MSE) [2], [3], the “Generalized Steinmetz Equation” (GSE) [3], [4], and the “Improved GSEs” (i-GSE) [4].”
BackgroundDemirkutlu, E., & İskender, İ. (2024) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2024.3349575 · Cited by 16
“To provide accurate results for inductor currents with various waveforms, the Steinmetz equation can be modified, as shown in (17) [33].”
MethodZhao, M., Chen, J., Xin, Z., & Liu, H. (2024) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2024.3368164 · Cited by 16
“Although the current waveform of i x 1 is irregular, the core loss is calculated based on the generalized Steinmetz equation [29].”
MethodA High Efficiency Non-Isolated Three-Phase Unfolding Based Electric Vehicle Powertrain
Khan, M. S., Nag, S. S., & Das, A. (2024) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2024.3383803 · Cited by 16
“The inductor loss includes the winding loss and the core loss computed based on the improved Generalised Steinmetz Equation (iGSE) [27].”
MethodOptimization Design of High-Frequency Matrix Transformer for Solid-State Transformer
Wan, Z., Li, Y., Wang, H., & Li, X. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3424509 · Cited by 16
“To calculate core loss more accurately, many improved forms for the Steinmetz equation have been proposed [6], [7].”
MethodEfficiency improvements for high frequency resistance spot welding
Wagner, M., & Kolb, S. (2013) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2013.6634720 · Cited by 16
“In [9] is stated that the estimate of core losses for piecewise linear flux waveforms is given by:”
BackgroundImpact of Zero-Volt Loop Control on Efficiency of Switched Reluctance Motors
Kojima, T., & Doncker, R. W. D. (2017) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2017.2679684 · Cited by 16
“flux waveforms, the SE has been improved to the improved generalized Steinmetz equation (iGSE) [13] ⎪⎪⎨ ⎪⎪⎩ pFe = 1”
Antoszczuk, P., Retegui, R. G., & Uicich, G. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2558469 · Cited by 17
“The improved generalized Steinmetz equation (iGSE) allows to accurately predict losses with arbitrary magnetic induction waveforms [16], [17].”
MethodCzyż, P., Guillod, T., Krismer, F., & Kolar, J. W. (2018) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec.2018.8507746 · Cited by 19
“For the calculation of the ferrite core losses the improved Generalized Steinmetz Equation (iGSE) is used [24].”
MethodMuhammad, R., Kieu, H.-P., Park, J., Tat-Thang, L., Choi, S., Jung, H., & Yoon, B.-K. (2022) · 2022 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec43599.2022.9773511 · Cited by 15
“Since the flux waveforms of the proposed structure exhibit non-sinusoidal shape, the Improved Generalized Steinmetz equation (IGSE) [16] is used to calculate the core loss.”
MethodDC/DC Stage Contribution to Bus Voltage in 1000- and 1500-V Grid-Connected Solar Inverters
Stevanovic, B., Serban, E., Cóbreces, S., Alou, P., Ordonez, M., & Vasić, M. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3175950 · Cited by 15
“The magnetic core losses 529 are calculated using previously mentioned iGSE [32], [33].”
MethodGao, S., Zhao, X.-J., Zhang, X., Zhu, W. B., Gao, Y., Muramatsu, K., & Fujiwara, K. (2024) · Physica B Condensed Matter · doi:10.1016/j.physb.2024.416875 · Cited by 15
Research of Harmonic Effects on Core Loss in Soft Magnetic Composite Materials
Yu, X., Li, Y., Yang, Q., Zhang, C., Liu, Y., & Gong, X. (2018) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2018.2869659 · Cited by 15
Ishikura, Y., Imaoka, J., Noah, M., & Yamamoto, M. (2019) · IET Power Electronics · doi:10.1049/iet-pel.2018.5362 · Cited by 15
Shi, Y., Li, H., Wang, L., & Zhang, Y. (2020) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2020.2973074 · Cited by 15
“Therefore the trajectory in the BH plane can be treated as a group of closed curves; no minor loop separation is needed [34].”
BackgroundMethodZhang, X., Xiao, F., Wang, R., Kang, W., & Yang, B. (2022) · Energies · doi:10.3390/en15041361 · Cited by 16
Study of a High-Power Medium Frequency Transformer Using Amorphous Magnetic Material
Zhang, S., Chen, D., & Bai, B. (2022) · Symmetry · doi:10.3390/sym14102129 · Cited by 16
“…(GSE) [28] is derived as: In addition, another common expression for calculating core loss is the improved Generalized Steinmetz equation (IGSE) [29]: The waveform-coefficient Steinmetz equation (WCSE) is another improved Steinmetz equation by defining the waveform coefficient F , which can be…”
BackgroundSensitivity of telecom dc-dc converter optimization to the level of detail of the system model
Badstuebner, U., Stupar, A., & Kolar, J. W. (2011) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2011.5744655 · Cited by 15
“The transformer core losses are calculated with the extended Steinmetz formula for non-sinusoidal waveforms as proposed in [11].”
MethodMedium Frequency Transformer Design and Optimization
Mogorovic, M., & Dujić, D. (2017) · Infoscience (Ecole Polytechnique Fédérale de Lausanne) · Cited by 20
Modeling and Design of a Medium-Frequency Transformer for High-Power DC-DC Converters
Stojadinović, M., & Biela, J. (2019) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.8.685 · Cited by 17
“2) Core Losses: For calculating the transformer core losses the Improved Generalized Steinmetz Equation (iGSE), presented in [25], is used.”
MethodRasekh, N., Wang, J., & Yuan, X. (2021) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2021.3076137 · Cited by 15
Analysis and Design of High Efficiency, High Conversion Ratio, DC-DC Power Converters
Costinett, D. J. (2013) · CU Scholar (University of Colorado Boulder) · Cited by 26
Liu, Z., Zhu, L., Dang, Y., Zhan, C., & Ji, S. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3512856 · Cited by 14
“Empirical equations [8], [9], [10], [11], [12], [13], [14] and loss separation formulas [15], [16], [17], [18], [19], [20] have been proposed to predict the core loss under non-sinusoidal excitations.”
A transient core loss calculation algorithm for soft magnetic composite material
Wasekura, M., Wang, C., Maeda, Y., & Lorenz, R. D. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6647192 · Cited by 14
“Also several derivative models have been developed due to limited accuracy for nonsinusoidal waveforms and the DC bias component [7-9].”
MethodEvaluation of core loss in magnetic materials employed in utility grid AC filters
Beres, R. N., Wang, X., Blaabjerg, F., Bak, C. L., Matsumori, H., & Shimizu, T. (2016) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2016.7468298 · Cited by 14
“Then, the difficulties to describe the associated frequency-dependent core losses, especially under the non-sinusoidal excitation [11], [14] and dc bias condition [11], leads to rather conservative design approach of passive filters.”
BackgroundComparison of iron loss calculation methods for soft magnetic composite
Müller, S., Keller, M., Maier, M., & Parspour, N. (2017) · Brazilian Power Electronics Conference (COBEP) · doi:10.1109/cobep.2017.8257313 · Cited by 14
“The improved Generalized Steinmetz Equation (iGSE) includes explicitly these sub-loops [12].”
BackgroundHigh Power/Current Inductor Loss Measurement with Shunt Resistor Current-sensing Method
Huang, P.-Y., & Shimizu, T. (2018) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec.2018.8507755 · Cited by 14
“[2] J.”
Matsumori, H., Shimizu, T., Kosaka, T., & Matsui, N. (2020) · AIP Advances · doi:10.1063/1.5129419 · Cited by 14
Zhang, Y., Li, H., Guo, Z., & Peng, F. Z. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3126814 · Cited by 14
“The core loss is calculated with the improved Generalized Steinmetz Equation (iGSE) based on iLoad and i A as follows [15]:”
MethodCompact Integrated Transformer – Grid Inductor Structure for E-Capless Single-Stage EV Charger
Hakim, R. M., Kieu, H.-P., Park, J., Le, T.-T., Choi, S., Song, B., Jung, H., & Yoon, B.-K. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3208970 · Cited by 14
“Since the core loss is largely affected by the high-frequency component of the swing flux density [21], the cancellation in the common leg results in a significant reduction in core loss.”
BackgroundModeling of Photovoltaic Inverter Losses for Reactive Power Provision
Grab, R., Hans, F., Flores, M. I. R., Schmidt, H., Rogalla, S., & Engel, B. (2022) · IEEE Access · doi:10.1109/access.2022.3213272 · Cited by 14
“The core losses depend essentially on the magnetic flux density and therefore increase with the current, but do not depend on the phase angle [27], [28].”
BackgroundMultiobjective optimal design of transformers for isolated switch mode power supplies
Versèle, C., Deblecker, O., & Lobry, J. (2010) · International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM) · doi:10.1109/speedam.2010.5542043 · Cited by 18
“[10]-[ 12 ]). Two of them are the “Modified Steinmetz Equation” (MSE) and “Natural Steinmetz Equation” (NSE).”
BackgroundIron-Loss Simulation of Laminated Steels Based on Expanded Generalized Steinmetz Equation
Chen, K. (2009) · Asia-Pacific Power and Energy Engineering Conference (APPEEC) · doi:10.1109/appeec.2009.4918455 · Cited by 14
Metadata
- Authors
- Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H.
- Affiliations
- Dartmouth College (US)
- Universidad de Buenos Aires (AR)
- Venue
- 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings.
- Publisher
- IEEE
- Published
- 2003-06-26
- Pages
- 36-41
- ISSN
- 2151-0997 (ISSN-L)
- OpenAlex
- W2109185194
- Cited by
- 1,145
- References
- 23
- Citations by year
- 2026: 49 · 2025: 76 · 2024: 105 · 2023: 82 · 2022: 99 · 2021: 85 · 2020: 104 · 2019: 86 · 2018: 66 · 2017: 67 · 2016: 57 · 2015: 45 · 2014: 47 · 2013: 40 · 2012: 33
- FWCI
- 5.50
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE ... Workshop on Control and Modeling for Power Electronics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Magnetic Properties and Synthesis of Ferrites
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Keywords
- non-sinusoidal waveforms, hysteresis loss, recursive algorithm, magnetic materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.