Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
An improved calculation of ferrite core loss for nonsinusoidal waveforms separates a flux trajectory into major and minor loops via a new recursive algorithm. It is highly accurate and outperforms two previous methods for our measured data. The only characteristics of the material required are the standard Steinmetz-equation parameters.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
General properties of power losses in soft ferromagnetic materials
Bertotti, G. (1988) · IEEE Transactions on Magnetics · doi:10.1109/20.43994 · Cited by 2,162 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Mathematical models of hysteresis
Mayergoyz, I. (1986) · IEEE Transactions on Magnetics · doi:10.1109/tmag.1986.1064347 · Cited by 1,166
[Mathematical models of hysteresis]
Mayergoyz, I. D. (1991) · doi:10.2172/6911694 · Cited by 708
Soft Ferrites—Properties and Applications
Brailsford, F. (1970) · Electronics and Power · doi:10.1049/ep.1970.0192 · Cited by 613
Improved calculation of core loss with nonsinusoidal waveforms
Li, J., Abdallah, T., & Sullivan, C. R. (2002) · Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248) · doi:10.1109/ias.2001.955931 · Cited by 531 · cited 10×
“In [6], the MSE and GSE are compared with experimental data, and while both provide a vastly better approximation than the basic Steinmetz equation (1), and the GSE avoids some problems exhibited in the MSE, each has significant error in at least one region.”
BackgroundMethodResultInfluentialSelf-citation(1998) · doi:10.1016/b978-0-12-093270-2.x5048-x · Cited by 487
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation
Reinert, J., Brockmeyer, A., & De Doncker, R. W. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.806023 · Cited by 409 · cited 4×
“The consideration of these Axioms 1 and 2 allows one to see that the MSE [5] and the model in [20] cannot be expected to work well for truly general consideration of many different possible waveforms; the problems with the MSE were confirmed experimentally in [5].”
BackgroundMethodInfluentialSteinmetz, C. P. (1892) · Transactions of the American Institute of Electrical Engineers · doi:10.1109/t-aiee.1892.5570437 · Cited by 407 · cited 1×
“A similar equation, but without the frequency dependence, was proposed by Steinmetz in 1892 [3], and so (1) is often referred to as the Steinmetz equation.”
BackgroundAn improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform
Fiorillo, F., & Novikov, A. (1990) · IEEE Transactions on Magnetics · doi:10.1109/20.104905 · Cited by 382 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Albach, M., Durbaum, T., & Brockmeyer, A. (2002) · PESC Record. 27th Annual IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1996.548774 · Cited by 225
Research works printed but not linked: 4
- vorperian, 2002, Using fractals to model eddy-current losses in ferromagnetic materials, Switching power Magazine, 3, 18
- mulder, 1995, Power ferrite loss formulas for transformer design, Powerconversion and Intelligent Motion, 21, 22
- 2000, MATLAB Version 6
- ridley, 2002, Modeling ferrite core losses, Switching power Magazine, 3, 6
Cited by
Items 801–900 of 1,000
Gohil, G., Bede, L., Teodorescu, R., Kerekes, T., & Blaabjerg, F. (2016) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2016.7468181 · Cited by 3
“Core Loss Modeling The Improved Generalized Steinmetz Equation (IGSE) [12], [13] is used to calculate the core losses.”
MethodHigh Frequency High Power Full Bridge Converter for Plasma Torches
Hakki, A., Sadikov, K. G., & Кашапов, Н. Ф. (2017) · Journal of Physics Conference Series · doi:10.1088/1742-6596/789/1/012021 · Cited by 3
“shows the currents of primary and secondary of transformer [7,8].”
BackgroundThermal behaviour of DC power inductor of 600 kW power supply for particle accelerators
Matejevic, D., Josifović, I., Papastergiou, K. D., Godec, G. L., & Burnet, J.-P. (2017) · European Conference on Power Electronics and Applications · doi:10.23919/epe17ecceeurope.2017.8099279 · Cited by 3
“Depending on the used methodology for calculating the skin and proximity effects, the factor FRn, can be represented in different ways [16].”
BackgroundMethodClavero, L., Delgado, A., Alou, P., Bakic, M., & Wijekoon, T. (2023) · European Conference on Power Electronics and Applications · doi:10.23919/epe23ecceeurope58414.2023.10264321 · Cited by 3
Dai, M., Sun, D., Wei, X., Cong, L., & Wang, C. B. (2023) · Scientific Reports · doi:10.1038/s41598-023-44882-1 · Cited by 3
“…analysis in chapter 3, an improved Steinmetz empirical formula is needed because the core voltage of the proposed control strategy is not sinusoidal 13,14. where f eq is the effective switching frequency which can be expressed as It is evident that P core is positively related to the switching…”
BackgroundVoldoire, A. (2024) · IEEE Design Methodologies Conference (DMC) · doi:10.1109/dmc62632.2024.10812128 · Cited by 3
DC-DC Converter Architecture for Fast Electric Vehicle (EV) Battery Charging Applications
Basu, S., Ivimey, A., & Praveen, J. (2025) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48143.2025.10977471 · Cited by 3
Efficiency/cost trade-off design of a multiple-active-bridge converter for smart transformer
Costa, L. F., Buticchi, G., & Liserre, M. (2018) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2018.8341163 · Cited by 6
“For the core losses, the generalized Steinmetz equation [20] is used.”
MethodImproved method of evaluating power losses in pulse converters of micro resistance welding machines
Bondarenko, O. F., Ryzhakova, T., & Kozhushko, Y. (2018) · Technology and design in electronic equipment · doi:10.15222/tkea2018.3.38 · Cited by 3
Design of electromagnetic components for EV battery chargers
Stratta, A., Bolognesi, P., Biagini, V., Biskoping, M., & Tombelli, F. (2019) · The Journal of Engineering · doi:10.1049/joe.2018.8137 · Cited by 3
“On this basis, and considering that with an LLC converter the voltage waveforms applied to the transformer windings are almost sinusoidal, the common Steinmetz equation is used [12].”
MethodDifferent Iron Loss Models for Electrical Steel Sheets considering Harmonic Flux Signals
Stiller, M., & Hahn, I. (2019) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2019.8781409 · Cited by 3
“[11] states that the dependency of the losses on the instantaneous flux density causes inaccuracies in practice.”
BackgroundMethodInfluentialLoss distribution comparison of variable and fixed inductor DAB converters
Smailus, E., Griepentrog, G., Pfeifer, M., & Lutze, M. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215785 · Cited by 3
“Magnetic Loss The losses of the magnetic cores are calculated by applying the improved generalized Steinmetz equation (iGSE) introduced in [7]:”
MethodBakeer, A., Chub, A., & Vinnikov, D. (2020) · IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg48541.2020.9244438 · Cited by 3
“As the excitation flux inside the transformer core is not sinusoidal, the mathematical model from [13] is employed to calculate the core losses of the transformer based on the improved generalized Steinmetz equation.”
MethodSzczerba, P., Ligenza, S., & Worek, C. (2021) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/pemc48073.2021.9432602 · Cited by 3
“There are several variations of this equation [10], [11], [12], [13], however, from a practical point of view the most accurate estimation, applicable to power electronics conversion is given by a combination of Ferroxcube [14] and Mu [10] approach, which yields:”
MethodRE/SOURCED PILOT PROJECT: DESIGN AND POWER FLOWANALYSIS OF A LVDC BACKBONE WITH HYBRID ENERGY SYSTEM
Azaioud, H., Knockaert, J., Vandevelde, L., & Desmet, J. J. M. (2021) · IET conference proceedings. · doi:10.1049/icp.2021.1737 · Cited by 3
An Analytic Inverter Loss Model for Design and Operation Space Optimization
Fräger, L., Langfermann, S., Owzareck, M., & Friebe, J. (2021) · European Conference on Power Electronics and Applications · doi:10.23919/epe21ecceeurope50061.2021.9570490 · Cited by 3
“The core losses are calculated with the improved generalized Steinmetz equation (IGSE) [6].”
BackgroundMethodInfluentialMagnetic Core Loss and Material Characterization
Sudhoff, S. D. (2021) · Wiley eBooks · doi:10.1002/9781119674658.ch6 · Cited by 3
Modeling of a Flyback Converter Controlled by an IGBT for Generating a High-Frequency Pulse Voltage
Zhang, Z., He, H., He, J., Yu, H., Bian, K., & Chen, W. (2022) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2022.3165731 · Cited by 3
Zhao, T., Burgos, R. P., Wen, B., McLean, A., & Mattos, R. F. (2022) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda56483.2022.9955285 · Cited by 3
“The improved generalized Steinmetz equation (iGSE) [12] is adopted to calculate the core loss based on the current waveforms of the inductor from the simulation.”
MethodPriya, P., Das, A. K., Anand, S., & Fernandes, B. G. (2022) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon49645.2022.9968856 · Cited by 3
“For a square wave excitation applied in a single phase shift DAB converter, the core loss Pc is calculated using Improved Generalized Steinmetz Equation (IGSE) method [18].”
MethodReview and comparison of single and dual active bridge converters for MVDC-connected wind turbines
Timmers, V. R. J. H., Egea‐Àlvarez, A., Gkountaras, A., & Xu, L. (2023) · IET conference proceedings. · doi:10.1049/icp.2022.2819 · Cited by 3
Magnetic Design of a 4.16 kV/1 MW Medium Voltage PV Plus Storage Solid State Transformer (PVS-SST)
Guo, Z., Xu, W., Vetrivelan, A., & Huang, A. Q. (2023) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43580.2023.10131543 · Cited by 4
“For non-sinusoidal magnetization cases, the improved generalized Steinmetz equation (IGSE) [13] should be applied to obtain the magnetic specific core loss density expression Pv”
MethodMagnetic Circuit Design for Power Electronics
Hurley, W. G., Duffy, M. C., & Acero, J. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-99216-9.00041-x · Cited by 3
Inductor Design of Interleaved Totem-Pole Bridgeless Boost PFC Based on Pareto Optimization
Hyeon, Y.-J., Lee, D., Jeong, S.-W., Lim, J.-H., & Youn, H.-S. (2023) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon51785.2023.10311682 · Cited by 3
“The core loss may be calculated through the change in the flux density at the maximum current and the minimum current[15].”
BackgroundSimulation analysis on magnetic core loss characteristic of valve reactor in UHVDC system
Wang, Y., Yuan, J., Mo, Z., Tan, J., Li, X., Zhou, H., & Chen, T. (2024) · AIP Advances · doi:10.1063/9.0000827 · Cited by 3
Mirza, A. B., Choksi, K., Zhou, A., Vala, S. S., & Luo, F. L. (2024) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2024.3385398 · Cited by 3
Yi, L., & Moon, J. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509515 · Cited by 3
Wu, D., Lyu, Y., Wang, P., Arruti, A. R., Ouyang, Z., & Andersen, M. A. E. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509133 · Cited by 3
“These losses can be quan-tified using the following equation [27]: Table IV presents key core parameters obtained from material datasheets, including the loss coefficient ( k loss ), exponent ( α ), and exponent ( β ).”
MethodOpenMagnetics: An Online Toolbox for Designing and Simulating Magnetics
Martínez, A. (2024) · IEEE Power Electronics Magazine · doi:10.1109/mpel.2024.3440706 · Cited by 3
Cheng, Z., Ji, T., Li, A., Kacprzak, D., & Hu, A. P. (2025) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2025.3545775 · Cited by 3
“A modified generalized Steinmetz equation was proposed in [10] to calculate the core loss under square voltage excitation.”
Impact of zero-volt loop on efficiency of switched reluctance motors
Kojima, T., & Doncker, R. W. D. (2015) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2015.7385120 · Cited by 3
Iron loss calculation of AC filter inductor for three-phase PWM inverter
Matsumori, H., Shimizu, T., Takano, K., & Ishii, H. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310086 · Cited by 3
Experimental verification of high-speed permanent magnet synchronous motor model
Novák, M., Novák, J., & Chyský, J. (2012) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icelmach.2012.6350225 · Cited by 3
Influence of nonsinusoidal flux waveform on transformer design methodology
Kohan, N. A., & Abbaszadeh, K. (2010) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc.2010.5471855 · Cited by 3
“In the last decade, some literatures have been published about calculation of core losses under nonsinusoidal remagnetization [2]-[4],[8], [9].”
BackgroundComparison between single phase and three phase of PWM inverters in Iron Loss measurement
Matsumori, H., Shimizu, T., Takano, K., & Ishii, H. (2012) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/epepemc.2012.6397235 · Cited by 3
Novel iron loss calculation model for AC filter inductor on PWM inverter
Matsumori, H., Shimizu, T., Takano, K., & Ishii, H. (2016) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc.2016.7512884 · Cited by 3
Matsumori, H., Shimizu, T., Takano, K., & Ishii, H. (2017) · IEEJ Transactions on Industry Applications · doi:10.1541/ieejias.137.395 · Cited by 3
Prantner, M., Buticchi, G., & Liserre, M. (2017) · European Conference on Power Electronics and Applications · doi:10.23919/epe17ecceeurope.2017.8099213 · Cited by 3
Investigation on different pole configurations of an outer rotor integrated magnetic gear
Thyroff, D., & Hahn, I. (2017) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2017.8216343 · Cited by 3
“Furthermore, the loss calculation utilizes the MATLAB script published by [15].”
BackgroundMethodInfluentialScaling algorithms in modelling of power loss in soft magnetic composites
Najgebauer, M., Szczygłowski, J., Ślusarek, B., & Przybylski, M. (2019) · COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering · doi:10.1108/compel-10-2018-0412 · Cited by 3
Sizing, Design, and Modelling of Aerospace Electric Drive System with Long Feeder Cables
Xie, P., Vakil, G. I., & Gerada, C. (2019) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2019.8785399 · Cited by 3
“Core loss is calculated using iGSE [7].”
MethodWinding Shape Optimization in Transformers
Carestia, R. H., Stein, A. L. F., & Sullivan, C. R. (2019) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2019.8769697 · Cited by 3
Self-citationPerformance of SPS Control with External and Internal Phase Shift for DAB DC-DC Converter
Chaurasiya, S., & Singh, B. (2020) · IEEE International Conference on Computing, Power and Communication Technologies (IC2PCT) · doi:10.1109/gucon48875.2020.9231115 · Cited by 3
Current Characteristic Values Estimation for Losses Calculation of Inductor in Dual Active Bridge
Wen, J., Jin, H., Dong, X., Wang, Z., Liu, Y., Wang, C., Kong, H., & Wang, L. (2022) · International Conference on Power Energy Systems and Applications (ICoPESA) · doi:10.1109/icopesa54515.2022.9754392 · Cited by 3
“Current Based iGSE According to iGSE[13]:”
BackgroundMethodInfluentialFrias, A. (2015) · theses.fr (ABES) · doi:10.70675/322aa806z1949z4789za8a8ze722bf60928b · Cited by 3
An Assessment of Coupled Inductor Modeling for a Multi¿output Flyback Converter
Farahmand, F., Dawson, F. P., & Lavers, J. D. (2006) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2006.305632 · Cited by 3
“However, the value of the resistance is a function of operating voltage and frequency and should be recomputed using approaches such as those proposed in [6], [7] or [8] if the operating point changes.”
Optimal sizing of passive components in power converters using discrete methods
Delaforge, T. (2016) · theses.fr (ABES) · doi:10.70675/4f520aa1z3245z48d2z8bc0z907a23a645ef · Cited by 12
Behavioral EMI Models of Switched Power Converters
Bishnoi, H. (2013) · VTechWorks (Virginia Tech) · Cited by 3
High efficiency electrostatic precipitator systems with low effects on the mains
Soeiro, T. B. (2012) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-a-009783558 · Cited by 3
“The core loss, which is a result of hysteresis, eddy current and stray losses, is calculated by the approach presented by [51], based on the Steinmetz equation along with the voltage waveforms.”
MethodDifferential Power Processing Submodule Integrated Converters for Photovoltaic Power Systems
Choi, B. (2015) · CU Scholar (University of Colorado Boulder) · Cited by 3
Aktive Gleichstromfilter für Geschaltete Reluktanzantriebe im Einzelpulsbetrieb
Klein‐Hessling, A. (2018) · RWTH Publications (RWTH Aachen) · doi:10.18154/rwth-2018-231030 · Cited by 3
Quantifying the Complexity of Modeling Power Magnetic Material CharacteristicsPreprint
Chen, M. (2022) · doi:10.36227/techrxiv.21340989.v2 · Cited by 3
Analytical sizing methodology for inductive power transfer systems
Arteaga, I. P., Martinez-Iturralde, M., Ibáñez, F. M., & Elósegui, I. (2014) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2014.6877222 · Cited by 2
Automated copper loss analysis for switched reluctance machines
Schenk, M., Hofmann, A., & Doncker, R. W. D. (2016) · EPE Journal · doi:10.1080/09398368.2016.1209880 · Cited by 2
Enhanced Area Product Method for High-Frequency Inductors and Transformers
Orzechowski, R., Jahnes, M., & Preindl, M. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509420 · Cited by 2
“The iGSE was introduced in [4] as a computational tool to more accurately model core losses in magnetic components with any waveform of excitation while still only using the OSE parameters.”
MethodGzieł, D., Najgebauer, M., & Mierczak, L. (2024) · Acta Physica Polonica A · doi:10.12693/aphyspola.146.59 · Cited by 2
Physical Modeling of Core Losses in Ferrite E-Cores
Dimier, T., & Biela, J. (2025) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2025.3554923 · Cited by 2
“Empirical methods derived from the Steinmetz power law can be further grouped as time-domain methods [10], [11], [12], [13] and waveform-adjusted methods [14], [15], [16], [17], [18], [19].”
An Iterative Error Correction Procedure for Single Sheet Testers Using FEM 3D Model
Krobot, R., & Dadić, M. (2025) · Sensors · doi:10.3390/s25123813 · Cited by 2
Park, S.-S., & Kim, R.-Y. (2025) · IEEE Access · doi:10.1109/access.2025.3593996 · Cited by 2
“As analyzed in [31], [32], and [33], a modified Steinmetz equation was proposed based on the fact that P v directly depends on dB / dt .”
A Novel Scalable Multilevel PFC Rectifier Based on Full Binary-Tree Structure
Ma, H., Li, Y., Xiang, K., Fan, L., Xi, L., & Huang, Y. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3621609 · Cited by 2
“The inductor core loss is evaluated using the general form of the core loss from the improved Generalized Steinmetz equation [37], [42] the coefficient k i is calculated as where coefficients α , β , and k are manufacturer-provided constants, Δ B is the peak-to-peak value of magnetic flux density of…”
A Dynamic Energy-Based Hysteresis Model for Pulsed-Operated Fast-Ramping Magnets
Moll, D., D’Angelo, L. A. M., Gersem, H. D., Boattini, F., Bottura, L., & Gast, M. (2025) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2025.3639643 · Cited by 2
“Accordingly, the hysteresis loss can only be approximated using a posteriori formulae for which we here assume the principle of loss separation [4] combined with signal-independent generalized loss expressions [12].”
Saafan, A. A., Nader-Hernández, A., Thacker, T., Dong, D., & Burgos, R. P. (2025) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce58356.2025.11259923 · Cited by 2
“Consequently, the AC resistance is computer as follows: where 𝐹 𝑟 , the ratio of AC-to-DC winding resistance can be obtained as explained in [10].”
MagNetX: Data-Driven Time-Domain Foundation Models for Power Magnetics in Transient
Wang, S., Kwon, H., Li, H., Guillod, T., Wouters, H., Sullivan, C. R., & Chen, M. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3685464 · Cited by 2
Self-citationGong, C., & Yao, C. (2026) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2026.3737293 · Cited by 2
“Maxwell’s equations and finite-element field solvers already describe the linear behavior of conductors and the geometric and thermal aspects of a component with high fidelity; what resists compact modeling is the strongly nonlinear, history-dependent magnetization that generates the loop itself,…”
On the Performances Investigation of Different Surface Mounted Permanent Magnet Machines
Mansouri, A., Msaddek, H., & Trabelsi, H. (2015) · International Journal of Power Electronics and Drive Systems/International Journal of Electrical and Computer Engineering · doi:10.11591/ijpeds.v6.i3.pp509-515 · Cited by 2
“One of the first iron loss models is the Steinmetz formula [7], in which the time average power loss per unit volume Pv(t) v is expressed by:”
BackgroundImpact of Steinmetz Coefficients Variance for FeSi Laminate Magnetic Cores
Ioniţă, V., Petrescu, L., & Cazacu, E. (2018) · International Symposium on Fundamentals of Electrical Engineering · doi:10.1109/isfee.2018.8742477 · Cited by 2
“[7], [8]) were proposed for other crystalline and amorphous alloys and the application domain was extended to higher frequencies, as in power electronics [9], or to wider frequency range [10].”
BackgroundTime domain modelling of soft ferrite inductors for power converters applications
Rimal, H. P., Ghanim, A. M., Antonio, S. Q., Faba, A., & Cardelli, E. (2019) · IEEE International Conference on Electronics, Circuits and Systems (ICECS) · doi:10.1109/icecs46596.2019.8965083 · Cited by 2
Design of highly compact short‐time duty power inductors for supercapacitor charging applications
Zhang, X., Wang, R., Xiao, F., Fan, X., Yang, G., & Yang, B. (2020) · IET Power Electronics · doi:10.1049/iet-pel.2020.0891 · Cited by 2
Automated design of integrated inductive components for DC-DC converters
Stratta, A., Gottardo, D., Nardo, M. D., Lillo, L. D., Empringham, L., Espina, J., & Johnson, C. M. (2021) · IEEE Design Methodologies Conference (DMC) · doi:10.1109/dmc51747.2021.9529936 · Cited by 2
Electromagnetic Losses Minimization in High-Speed Flywheel Energy Storage Systems
Floris, A., Damiano, A., & Serpi, A. (2021) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon48115.2021.9589843 · Cited by 2
“In this regard, several analytical or empirical approaches have been proposed in literature [15], [16], among which the relatively simple approach proposed in [17] for core losses estimation in permanent magnet brushless AC machine at both rated flux and flux-weakening operations.”
BackgroundDesign Space Optimization of a SiC Drive Inverter with an Integrated All-Pole Sine Filter
Langfermann, S., Owzareck, M., & Fräger, L. (2021) · European Conference on Power Electronics and Applications · doi:10.23919/epe21ecceeurope50061.2021.9570448 · Cited by 2
“The specific core losses can be calculated with the improved generalized Steinmetz equation (iGSE) [6]:”
BackgroundOptimized Planar Inductor for a High Current 3.5 kW Isolated DC/DC Converter
Oestergaard, C., Kjeldsen, C. S., & Nymand, M. (2021) · European Conference on Power Electronics and Applications · doi:10.23919/epe21ecceeurope50061.2021.9570418 · Cited by 2
Park, C., Fujimoto, M., Takahashi, H., Li, Z., & Wu, B. (2022) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43599.2022.9773405 · Cited by 2
“Core loss Applying the improved generalized Steinmetz equation(IGSE) [15], [16] should be a simple way to estimate the core loss in the proposed converter because the voltage and current waveform in transformers is not sinusoidal.”
MethodWinding Geometry Impact on High Power Medium Frequency Transformer Design
Djekanovic, N., & Dujić, D. (2022) · International Symposium on Industrial Electronics and Applications (INDEL) · doi:10.1109/indel55690.2022.9965461 · Cited by 2
“For core loss estimation the Improved generalized Steinmetz equation [6] is employed, since it provides accurate loss pro-”
MethodJin, H., Dong, X., Wen, J., Yang, C., Pei, Y., & Wang, L. (2022) · IEEE International Power Electronics and Application Conference and Exposition (PEAC) · doi:10.1109/peac56338.2022.9959096 · Cited by 2
“For nonsinusoidal waveform, the core loss is derived using IGSE [14].”
MethodDebbadi, K., Pascal, Y., & Liserre, M. (2022) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon49645.2022.9968956 · Cited by 2
“The core losses in the inductor are computed based on the improved Generalized Steinmetz Equation (iGSE) provided by [17].”
MethodAnalysis and Optimization of the Loss Distribution for a Two Stage AC/DC Power Supply
Fräger, L., & Friebe, J. (2023) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2023.3341701 · Cited by 2
“The magnetics loss model based on [16], [17] is simplified for the specific application in power electronic converters and possibilities for pre-calculation are exploited.”
MethodDou, M., Zhao, W., Li, M., Ding, H., & Zhang, L. (2023) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems59686.2023.10345171 · Cited by 2
Bouvier, Y. E., Salinas, G., Stanojević, A., & Grbović, P. J. (2023) · International Symposium on Power Electronics (Ee) · doi:10.1109/ee59906.2023.10346155 · Cited by 2
“The use of modified Steinmetz equations [19] is not necessary for this case because the waveform is sinusoidal.”
MethodLiu, Z., Zhu, L., Dang, Y., Zhan, C., & Ji, S. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362551 · Cited by 2
Analytical Fringing Field Model for Efficient Winding Loss Calculation in Gapped Foil Inductors
Ewald, T., & Biela, J. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3368145 · Cited by 2
“Utilizing advanced models for core losses and thermal analysis [20] and [21], the computation of foil winding losses constitutes a significant portion of the overall processing time.”
BackgroundMethodAnalysis of eddy currents and thermal modeling of planar magnetic components with metal housing
Hasenuma, A., Imaoka, J., Yamamoto, M., Miyazaki, T., Okawauchi, Y., & Kawano, A. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509263 · Cited by 2
A Core Loss Estimation Method Based on Data-driven Technology with Multi-head Attention Mechanism
Su, B., Sun, K., Yang, M., Xiao, Y., Zhang, K., & Liu, B. (2024) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc-ecceasia60879.2024.10567902 · Cited by 2
“The improved generalized Steinmetz equation, labelled iGSE[8], is proposed to calculate core loss under any excitation waveform.”
MethodDira, Y. S., Ramli, A. Q., Amirulddin, U. A. U., Tan, N. M. L., & Buticchi, G. (2024) · Sustainability · doi:10.3390/su16219227 · Cited by 2
“…loss, the improved generalised Steinmetz equation (IGSE) was used to estimate the core loss density, with non-sinusoidal excitation applications [39]: where T is the time period, ∆ B is the peak-to-peak B , and k i is the following: α + 1.354 (13) and K c , α , and β are the Steinmetz…”
InfluentialMulti-Objective Optimal Design of a DC Inductor Using Particle Swarm Optimization Techniques
Shen, X., Kong, J., Zuo, Y., & Martinez, W. H. (2024) · IEEE Design Methodologies Conference (DMC) · doi:10.1109/dmc62632.2024.10812124 · Cited by 2
“We adopt the improved Generalized Steinmetz Equation (iGSE) for more accurate loss predictions under these conditions [8].”
InfluentialLi, B., Wang, H., Cai, F., Xie, W. D., & Zeng, Y. (2025) · Energies · doi:10.3390/en18071859 · Cited by 2
Nguyen, A. T., & Sullivan, C. R. (2025) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48143.2025.10977193 · Cited by 2
“Using the iGSE formulation, where α and β are Steinmetz parameters, V c and A c are core parameters, and k i is a constant calculated in [28].”
Self-citationOverview of helical foil winding design for planar magnetic components
Pentz, D. C. (2013) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2013.6505743 · Cited by 2
“Methods proposed in [6] and [7] and used in some of the case studies in [3] may be used to estimate core losses for non-sinusoidal excitation with no dcoffset.”
BackgroundBarrera-Cárdenas, R., Zhang, J., Isobe, T., & Tadano, H. (2017) · IEEE International Future Energy Electronics Conference (IFEEC) · doi:10.1109/ifeec.2017.7992353 · Cited by 2
Optimal cross section shape of tape wound cores
Cougo, B. (2015) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2015.7309350 · Cited by 2
“Many researchers developed more precise core loss models, taking into account different flux density waveforms [9-13] and DC offset in the excitation [14-16], however the analysis presented in this section will use (5) for the purpose of providing a simpler and more general explanation about losses in tape wound core.”
MethodDesign methodology of resonant inductor in a ZVS inverter
Du, C., Hurley, W. G., & Xu, D. (2014) · IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg.2014.6878677 · Cited by 2
“Since the current is nonsinusoidal, the high-frequency core loss is calculated by the improved general Steinmetz equation for the core selection [21].”
MethodSiddiqui, M. A. (2011) · Cited by 2
Core loss analysis of buck converter under chaotic PWM based on ANSYS
Zhu, B., Li, H., & Yang, Z. (2016) · Asia-Pacific International Symposium on Electromagnetic Compatibility (APEMC) · doi:10.1109/apemc.2016.7522899 · Cited by 2
High frequency core coefficient for transformer size selection
Muller, L., & Kimball, J. W. (2016) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2016.7855151 · Cited by 2
“If the applied voltage waveform is not sinusoidal, the NSE (New Steinmetz Equation) or MSE (Modified Steinmetz Equation) can be used to determine kfe for the given waveform [6], [17]–[19].”
MethodFouineau, A., Lefebvre, B., Pereira, A., Sixdenier, F., Raulet, M., & Burais, N. (2017) · European Conference on Power Electronics and Applications · doi:10.23919/epe17ecceeurope.2017.8098941 · Cited by 2
“A lot of work has been done to develop new methods based on the Steinmetz equation [3] [4], and so far these evolutions have allowed to obtain good accuracy on core losses evaluation for a given voltage waveform [5].”
MethodAli, S. Q., Hasanien, H. M., & Muyeen, S. M. (2017) · Australasian Universities Power Engineering Conference · doi:10.1109/aupec.2017.8282472 · Cited by 2
Novel Calculation Method of Iron Loss of Gapped Inductors Using Loss Map
Miwa, Y., & Shimizu, T. (2018) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec.2018.8507849 · Cited by 2
“Iron losses of transformers can be calculated with the Steinmetz equation or iGSE (Improved Generalized Steinmetz Equation) [2].”
MethodBarrera-Cárdenas, R., Isobe, T., Terazono, K., & Hiroshi, T. (2018) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec.2018.8507595 · Cited by 2
Optimum Design Approach of High Frequency Transformer: Including the Effects of Eddy Currents
Barqi, S. (2018) · International Multi-Conference on Systems, Signals & Devices (SSD) · doi:10.1109/ssd.2018.8570390 · Cited by 2
OpenComp3d: An open-source framework dedicated to design in power electronics
Etayo, A. M., Fontès, G., Hillesheim, M. M., Meynard, T. A., Flumian, D., Bourdon, J., & Piquet, H. (2018) · Mathematics and Computers in Simulation · doi:10.1016/j.matcom.2018.11.006 · Cited by 2
“From the magnetic field waveform B , the core losses are calculated using the iGSE model [20], which is a fair core loss calculation for any type of waveform.”
Method
Metadata
- Authors
- Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H.
- Affiliations
- Dartmouth College (US)
- Universidad de Buenos Aires (AR)
- Venue
- 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings.
- Publisher
- IEEE
- Published
- 2003-06-26
- Pages
- 36-41
- ISSN
- 2151-0997 (ISSN-L)
- OpenAlex
- W2109185194
- Cited by
- 1,145
- References
- 23
- Citations by year
- 2026: 49 · 2025: 76 · 2024: 105 · 2023: 82 · 2022: 99 · 2021: 85 · 2020: 104 · 2019: 86 · 2018: 66 · 2017: 67 · 2016: 57 · 2015: 45 · 2014: 47 · 2013: 40 · 2012: 33
- FWCI
- 5.50
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE ... Workshop on Control and Modeling for Power Electronics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Magnetic Properties and Synthesis of Ferrites
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Keywords
- non-sinusoidal waveforms, hysteresis loss, recursive algorithm, magnetic materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.