Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
An improved calculation of ferrite core loss for nonsinusoidal waveforms separates a flux trajectory into major and minor loops via a new recursive algorithm. It is highly accurate and outperforms two previous methods for our measured data. The only characteristics of the material required are the standard Steinmetz-equation parameters.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
General properties of power losses in soft ferromagnetic materials
Bertotti, G. (1988) · IEEE Transactions on Magnetics · doi:10.1109/20.43994 · Cited by 2,162 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Mathematical models of hysteresis
Mayergoyz, I. (1986) · IEEE Transactions on Magnetics · doi:10.1109/tmag.1986.1064347 · Cited by 1,166
[Mathematical models of hysteresis]
Mayergoyz, I. D. (1991) · doi:10.2172/6911694 · Cited by 708
Soft Ferrites—Properties and Applications
Brailsford, F. (1970) · Electronics and Power · doi:10.1049/ep.1970.0192 · Cited by 613
Improved calculation of core loss with nonsinusoidal waveforms
Li, J., Abdallah, T., & Sullivan, C. R. (2002) · Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248) · doi:10.1109/ias.2001.955931 · Cited by 531 · cited 10×
“In [6], the MSE and GSE are compared with experimental data, and while both provide a vastly better approximation than the basic Steinmetz equation (1), and the GSE avoids some problems exhibited in the MSE, each has significant error in at least one region.”
BackgroundMethodResultInfluentialSelf-citation(1998) · doi:10.1016/b978-0-12-093270-2.x5048-x · Cited by 487
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation
Reinert, J., Brockmeyer, A., & De Doncker, R. W. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.806023 · Cited by 409 · cited 4×
“The consideration of these Axioms 1 and 2 allows one to see that the MSE [5] and the model in [20] cannot be expected to work well for truly general consideration of many different possible waveforms; the problems with the MSE were confirmed experimentally in [5].”
BackgroundMethodInfluentialSteinmetz, C. P. (1892) · Transactions of the American Institute of Electrical Engineers · doi:10.1109/t-aiee.1892.5570437 · Cited by 407 · cited 1×
“A similar equation, but without the frequency dependence, was proposed by Steinmetz in 1892 [3], and so (1) is often referred to as the Steinmetz equation.”
BackgroundAn improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform
Fiorillo, F., & Novikov, A. (1990) · IEEE Transactions on Magnetics · doi:10.1109/20.104905 · Cited by 382 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Albach, M., Durbaum, T., & Brockmeyer, A. (2002) · PESC Record. 27th Annual IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1996.548774 · Cited by 225
Research works printed but not linked: 4
- vorperian, 2002, Using fractals to model eddy-current losses in ferromagnetic materials, Switching power Magazine, 3, 18
- mulder, 1995, Power ferrite loss formulas for transformer design, Powerconversion and Intelligent Motion, 21, 22
- 2000, MATLAB Version 6
- ridley, 2002, Modeling ferrite core losses, Switching power Magazine, 3, 6
Cited by
Items 101–200 of 1,000
Li, C., & Xu, D. D. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2652374 · Cited by 69
Boillat, D. O., Krismer, F., & Kolar, J. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2393151 · Cited by 72
“The core losses Pfe are calculated with the improved generalized Steinmetz equation (iGSE) according to [57], [58].”
MethodBadstuebner, U., Biela, J., & Kolar, J. W. (2010) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2010.5543337 · Cited by 68
“The core losses are determined by the Steinmetz parameter for the applied core material with the extended Steinmetz formula due to the non-sinusoidal current waveform, as explained in [10].”
MethodHighly Efficient and Reliable SiC-Based DC–DC Converter for Smart Transformer
Costa, L. F., Buticchi, G., & Liserre, M. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2696481 · Cited by 67
“For the core losses, the Steinmetz equation due to the almost pure sinusoidal current waveforms [27] is used.”
MethodA 380-12V, 1kW, 1MHz Converter Using a Miniaturized Split-Phase, Fractional Turn Planar Transformer
Ranjram, M. K., & Perreault, D. J. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3103434 · Cited by 72
“1) Core Loss: At resonance, the voltage on the core is a square wave, and core loss can be estimated via the improved general Steinmetz equation (iGSE) [32]”
MethodCzyż, P., Guillod, T., Zhang, D., Krismer, F., Huber, J., Färber, R., Franck, C. M., & Kolar, J. W. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3123793 · Cited by 69
Brooks, N. C., Zou, J., Coday, S., Ge, T., Ellis, N. M., & Pilawa-Podgurski, R. C. N. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3365658 · Cited by 69
“Others propose an empirical loss equation for capacitors [24], [25], [26], being the dual of the venerable Steinmetz equation for inductors [80], [81].”
BackgroundMethodHillers, A., & Biela, J. (2013) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2013.6634660 · Cited by 65
Villar, I., Mir, L., Etxeberria-Otadui, I., Colmenero, J., Agirre, X., & Nieva, T. (2012) · 2012 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342754 · Cited by 64
“On the other hand, with the voltage waveform, core losses (Step 6) are determined using the Improved Generalized Steinmetz Equation (IGSE) [9].”
Methodde la Barrière, O., LoBue, M., Appino, C., Fiorillo, F., Ragusa, C. S., Lecrivain, M., Rocchino, L., Ahmed, H. B., Gabsi, M., & Mazaleyrat, F. (2012) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2012.2218614 · Cited by 65
“However complications appear in loss analysis, because one has to deal with complex flux regimes, ubiquitously arising in electrical machines and in power electronics [4][5][6], while the data provided by the manufacturers typically refer, acco rding to the standards, to sinusoidal induction.”
BackgroundHigh Frequency Magnetic Core Loss Study
Mu, M. (2013) · VTechWorks (Virginia Tech) · Cited by 65
Mini-LEGO CPU Voltage Regulator
Elasser, Y., Baek, J.-I., Radhakrishnan, K., Gan, H., Douglas, J. P., Krishnamurthy, H. K., Li, X., Jiang, S., De, V. K., Sullivan, C. R., et al. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3337171 · Cited by 64
“The “improved Generalized Steinmetz Equation” (iGSE) is used to estimate the core loss [32].”
MethodSelf-citationNanakos, A. C., Christidis, G. C., & Tatakis, E. C. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2372005 · Cited by 63
“There are several models and formulas for core losses for nonsinusoidal flux waveforms (as the ones that are usually found in power electronics converters): hysteresis models, such as Preisach [39] and Jiles and Atherton [40], models based on loss separation [41] or empirical formulas, such as different versions of th…”
MethodBridgeless PFC Topology Simplification and Design for Performance Benchmarking
Chen, Z., Liu, B., Yang, Y., Davari, P., & Wang, H. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3028419 · Cited by 61
Impedance Control Network Resonant dc-dc Converter for Wide-Range High-Efficiency Operation
Lü, J., Perreault, D. J., Otten, D. M., & Afridi, K. K. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2480747 · Cited by 60
“The core losses are calculated using the improved generalized Steinmetz equation [22]”
MethodA Compact Single-Phase AC–DC Wireless Power Transfer Converter With Active Power Factor Correction
Liu, J., Xu, F., Sun, C., & Loo, K. H. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3176297 · Cited by 59
Sarker, P. C., Islam, M. R., Guo, Y. G., Zhu, J. G., & Lu, H. (2018) · IEEE Transactions on Applied Superconductivity · doi:10.1109/tasc.2018.2882411 · Cited by 62
“For that, the instantaneous value of flux density is substituted by the peak to peak value and the equation of the loss is given by [43]”
BackgroundMethodMultimode Control Strategy for SiC mosfets Based Semi-Dual Active Bridge DC–DC Converter
Sha, D., Zhang, J., & Sun, T. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2866700 · Cited by 62
Planar Transformer With Asymmetric Integrated Leakage Inductance Using Horizontal Air Gap
D’Antonio, M., Chakraborty, S., & Khaligh, A. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3089606 · Cited by 63
“Finally, the core loss can be calculated in each of the core’s reluctance sections independently and summed using an adaptation of the improved generalized Steinmetz equation [21]”
BackgroundMethodLosses in Efficiency Maps of Electric Vehicles: An Overview
Roshandel, E., Mahmoudi, A., Kahourzade, S., Yazdani, A., & Shafiullah, G. (2021) · Energies · doi:10.3390/en14227805 · Cited by 58
Design of a Three-Phase Series Resonant Converter for Offshore DC Grids
Meyer, C., & Doncker, R. W. D. (2007) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/07ias.2007.40 · Cited by 58
“It should be mentioned that the losses of the transformer are calculated by using the Improved Generalized Steinmetz Equation [14] and also by considering the skin and proximity losses according to Dowell et.al.”
MethodOuyang, Z., Zhang, Z., Thomsen, O. C., & Andersen, M. A. E. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2129598 · Cited by 58
“Applying a piecewise linear model (PWL) to the nonsinusoidal waveform and combining this with the improved generalized Steinmetz equation (IGSE) [ 31 ] shows that the converter working under duty-cycle control (D < 50%) has a lower core loss in the shared I-core when the primary turns factor is K = 0.5; furthermore, z…”
MethodInfluentialTechnology, Research and Applications of Switched Reluctance Drives
Burkhart, B. (2017) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2017.00003 · Cited by 58
“modified Steinmetz equation (MSE) [50] and the improved generalized Steinmetz equation (iGSE) [51].”
BackgroundA Practical Core Loss Model for Filter Inductors of Power Electronic Converters
Matsumori, H., Shimizu, T., Wang, X., & Blaabjerg, F. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2761127 · Cited by 58
“equation (SE), shown in (1), have been developed for filter inductors [8].”
BackgroundStevanovic, B., Serrano, D., Vasić, M., Alou, P., Oliver, J. A., & Cobos, J. A. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2893106 · Cited by 58
“general Steinmetz equation, which is discussed in [51] and implemented in [52].”
BackgroundLiu, J., Xu, W., Chan, K. W., Liu, M., Zhang, X., & Chan, N. H. L. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2916258 · Cited by 59
Comparison of Different Designs of a 42-V/14-V DC/DC Converter Regarding Losses and Thermal Aspects
Lee, S.-Y., Pfaelzer, A., & van Wyk, J. D. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2006.889808 · Cited by 59
“applications [9]‐[ 12 ]. Following the literature, the core loss can be calculated by using (13).”
BackgroundHighly efficient and compact DC-DC converter for ultra-fast charging of electric vehicles
Christen, D., Tschannen, S., & Biela, J. (2012) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/epepemc.2012.6397481 · Cited by 61
Hu, J., Soltau, N., & Doncker, R. W. D. (2016) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2016.7854888 · Cited by 59
“Core Loss of Transformer The transformer core loss has been calculated by improved generalized Steinmetz’s equation (iGSE) under no load condition [12] [13], which is given by”
MethodSwitching Power Supplies with Ferrite Inductors in Sustainable Saturation Operation
Capua, G. D., Femia, N., & Stoyka, K. (2017) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2017.06.003 · Cited by 54
MagNet Challenge for Data-Driven Power Magnetics Modeling
Chen, M., Li, H., Wang, S., Guillod, T., Serrano, D., Förster, N., Kirchgässner, W., Piepenbrock, T., Schweins, O., Wallscheid, O., et al. (2024) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2024.3469916 · Cited by 54
“Despite several modifications and upgrades to the original SE (e.g., MSE [16], NSE [17], ISE [18], SSLE [19], CWH [20], iGCC [21], iGSE [22], and i 2 GSE [23]) – usually by adding new parameters to the SE framework – these curve-fitting methods have limited accuracy and cannot be smoothly expanded to…”
A Novel High Insulation 100 kW Medium Frequency Transformer
Guo, Z., Rajendran, S., Tangudu, J. K., Khakpour, Y., Taylor, S., Xing, L., Xu, Y., Feng, X., & Huang, A. Q. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3205646 · Cited by 53
“For non-sinusoidal magnetization cases, the improved generalized Steinmetz equation [11] is applied within this design methodology to obtain the magnetic specific core loss”
MethodBoillat, D. O., & Kolar, J. W. (2012) · International Conference on Renewable Energy Research and Applications (ICRERA) · doi:10.1109/icrera.2012.6477401 · Cited by 56
“The core losses Pc can be computed with the improved Generalized Steinmetz Equation (iGSE) [123] (which may not fully take into account losses due to the magnetic relaxation [124], which are assumed to be negligible for the present application)”
MethodWang, J., Dagan, K. J., Yuan, X., Wang, W., & Mellor, P. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2867264 · Cited by 52
“To overcome Challenge A, the improved generalized Steinmetz equation (IGSE) (2) was introduced to calculate the loss of any arbitrary flux waveform [12]–[14] as”
MethodCougo, B., Schneider, H., & Meynard, T. A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2360547 · Cited by 55
“An approximate calculation of the core losses in ferrite cores for nonsinusoidal flux can be based on the iGSE equation [40], which determines the core loss density Pdens”
MethodNoah, M., Kimura, S., Imaoka, J., Martinez, W. H., Endo, S., Yamamoto, M., & Umetani, K. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2018.2856631 · Cited by 51
DC collector grid configurations for large photovoltaic parks
Siddique, H. A. B., Ali, S. M., & Doncker, R. W. D. (2013) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2013.6631799 · Cited by 50
“The core loss is determined using the improved generalized Steimetz equation (IGSE) of [17].”
MethodSinusoidal Input Current Discontinuous Conduction Mode Control of the VIENNA Rectifier
Leibl, M., Kolar, J. W., & Deuringer, J. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2641502 · Cited by 50
Hanson, A. J., & Perreault, D. J. (2020) · IEEE Power Electronics Magazine · doi:10.1109/mpel.2019.2959356 · Cited by 50
“Here, we only model the behavior of magnetic coupling and energy storage within a component; there are many further aspects we do not discuss, such as capacitance modeling [9], winding loss modeling [10], [11], and core loss modeling [12], though these can often be treated separately and appended to these models.”
MethodMukherjee, S., Gao, Y., & Maksimović, D. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3002507 · Cited by 50
“Since the current through the inductor is purely sinusoidal without any dc bias, core losses can be estimated using Steinmetz expression [27], [28].”
MethodOptimal design of a compact 99.3% efficient single-phase PFC rectifier
Biela, J., Kolar, J. W., & Deboy, G. (2010) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2010.5433412 · Cited by 54
“In both cases the core losses can be calculated based on the method proposed in [15], where the Steinmetz coefficients [16] are utilised for characterising the core material and where the rate of change of the flux density (dB/dt) is the basis for the loss calculation [5].”
MethodIsolated ZVS-ZCS DC–DC High Step-Up Converter With Low-Ripple Input Current
Zaoskoufis, K., & Tatakis, E. C. (2021) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2021.3063913 · Cited by 49
“The core loss expression [31] is as follows:”
BackgroundGurusamy, A., Ashok, B., & Mason, B. (2023) · IEEE Access · doi:10.1109/access.2023.3334620 · Cited by 55
“Likewise, iron or core loss is another decisive factor in the calculation of η motor which will be calculated by Stein-metz equations [135].”
MethodComparative evaluation of soft-switching, bidirectional, isolated AC/DC converter topologies
Everts, J., Krismer, F., den Keybus, J. V., Driesen, J., & Kolar, J. W. (2012) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2012.6165951 · Cited by 48
“The Core losses per unit volume (index ”V”) are calculated with the Steinmetz parameters k, α, β using the improved Generalized Steinmetz Equation (iGSE) [15]:”
MethodEvaluation of magnetic materials for very high frequency power applications
Han, Y., Cheung, G., Li, A., Sullivan, C. R., & Perreault, D. J. (2008) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2008.4592628 · Cited by 47
“Numerous works illustrate how this information can be used in the design of magnetic components, even for systems with complex excitations [31]–[33].”
BackgroundSelf-citationAdvanced Ferromagnetic Materials in Power Electronic Converters: A State of the Art
Rodriguez-Sotelo, D., Rodríguez, M., Soriano-Sánchez, A. G., Espinosa-Calderon, A., & Pérez-Pinal, F. J. (2020) · IEEE Access · doi:10.1109/access.2020.2982161 · Cited by 49
Sidorov, V. E., Chub, A., Vinnikov, D., & Bakeer, A. (2020) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2020.3048003 · Cited by 47
“The methodology of power losses calculation in a transformer core with non-sinusoidal waveforms is described in detail in [28].”
MethodLeuenberger, D., & Biela, J. (2012) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/epepemc.2012.6397397 · Cited by 46
“The core losses are calculated with the iGSE [15].”
MethodWang, W., Liu, Y., He, J., Ma, D., Hu, L., Yu, S., Li, S., & Liu, J. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3155751 · Cited by 47
Low-Loss Soft Magnetic Materials and Their Application in Power Conversion: Progress and Perspective
Wang, W., Jiaqi, F., Li, C., Yu, Y., Wang, A., Li, S., & Liu, J. (2025) · Energies · doi:10.3390/en18030482 · Cited by 45
Thermal modeling and experimental verification of an air cooled medium frequency transformer
Mogorovic, M., & Dujić, D. (2017) · European Conference on Power Electronics and Applications · doi:10.23919/epe17ecceeurope.2017.8099176 · Cited by 53
“Table II: Frequency dependent core and winding loss calculation of the injected thermal energy [5, 11, 12]”
BackgroundMedium-Frequency Transformer Scaling Laws: Derivation, Verif ication, and Critical Analysis
Guillod, T. (2020) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2020.00003 · Cited by 48
Two-Stage Optimization Method for Efficient Power Converter Design Including Light Load Operation
Yu, R., Pong, M. H., Ling, B. W., & Lam, J. C. W. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2114676 · Cited by 48
“The accuracy of existing models has been shown in previous research [15] [16], indicating that the models are reliable for predicting transformer loss.”
MethodAsymmetric Phase-Shift Modulation Strategy of DAB Converters for Improved Light-Load Efficiency
Chen, G., Chen, Z., Chen, Y., Feng, C., & Zhu, X. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3157375 · Cited by 47
“In addition to the methods mentioned above, improved Steinmetz methods are provided in the literature [28] and [29], which can also be used to estimate core losses.”
MethodWaffler, S., Preindl, M., & Kolar, J. W. (2009) · 2009 35th Annual Conference of IEEE Industrial Electronics · doi:10.1109/iecon.2009.5415123 · Cited by 43
“is a constant depending on the Steinmetz Parameters k, α, β of the magnetic material [9].”
BackgroundReusch, D., & Lee, F. C. (2010) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2010.5617929 · Cited by 43
Conversion Efficiency of the Buck Three-Level DC–DC Converter in Unbalanced Bipolar DC Microgrids
den Broeck, G. V., Martinez, W. H., Vecchia, M. D., Ravyts, S., & Driesen, J. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2969078 · Cited by 43
“The ac conduction losses in the inductor windings are given by (39) [33].”
BackgroundMethodCore Loss Model for Arbitrary Excitations With DC Bias Covering a Wide Frequency Range
Stenglein, E., & Duerbaum, T. (2021) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2021.3068188 · Cited by 43
Levron, Y., & Erickson, R. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2399418 · Cited by 43
“The core loss is evaluated by the iGSE model given in [26], and the proximity loss is evaluated by the model in [27].”
MethodPereira, T., Wei, Y., Pascal, Y., Mantooth, H. A., & Liserre, M. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3232188 · Cited by 44
Iron loss models: A review of simplified models of magnetization losses in electrical machines
Mörée, G., & Leijon, M. (2024) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2024.172163 · Cited by 42
Jauch, F., & Biela, J. (2014) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2014.6869826 · Cited by 45
Core loss behavior in high frequency high power transformers—II: Arbitrary excitation
Agheb, E., Bahmani, M. A., Høidalen, H. K., & Thiringer, T. (2012) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.4727917 · Cited by 42
Boillat, D. O., Kolar, J. W., & Mühlethaler, J. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6646954 · Cited by 42
“For both loops the improved Generalized Steinmetz Equation (iGSE) [10] is employed to compute the loop’s associated core losses.”
MethodTransient thermal model of a medium frequency power transformer
Villar, I., Viscarret, U., Etxeberria‐Otadui, I., & Rufer, A. C. (2008) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2008.4758096 · Cited by 44
“Due to the proliferation of power electronics based systems, and aware of the lack of expressions for non-sinusoidal magnetization cases, the Improved Generalized Steinmetz Equation [11] was introduced among other modified expressions.”
BackgroundImpact of power density maximization on efficiency of dc-dc converter systems
Kolar, J. W., Biela, J., & Badstuebner, U. (2007) · doi:10.1109/icpe.2007.4692344 · Cited by 42
“in [26], which is based on Steinmetz parameter [27] and the rate of magnetization (dB/dt).”
BackgroundComputation and analysis of dielectric losses in MV power electronic converter insulation
Guillod, T., Färber, R., Krismer, F., Franck, C. M., & Kolar, J. W. (2016) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2016.7854952 · Cited by 43
“The winding losses (skin and proximity effects) are computed according to [28], the core losses (improved generalized Steinmetz equation) according to [29], and the dielectric losses according to Subsection III-C.”
Stenglein, E., Kohlhepp, B., Kuebrich, D., Albach, M., & Duerbaum, T. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.2972140 · Cited by 42
Review of very high frequency power converters and related technologies
Wang, Y., Lucía, Ó., Zhang, Z., Guan, Y., & Xu, D. (2020) · IET Power Electronics · doi:10.1049/iet-pel.2019.1301 · Cited by 43
Wang, T., & Yuan, J. (2022) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2022.3187206 · Cited by 42
Medium frequency high power transformers, state of art and challenges
Agheb, E., & Høidalen, H. K. (2012) · International Conference on Renewable Energy Research and Applications (ICRERA) · doi:10.1109/icrera.2012.6477318 · Cited by 44
“Afterwards, improved GSE (iGSE) [25] enabled the users to consider the effect of minor loops.”
BackgroundProposal and validation of medium-frequency power transformer design methodology
Villar, I., Garcia‐Bediaga, A., Viscarret, U., Etxeberria‐Otadui, I., & Rufer, A. C. (2011) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2011.6064284 · Cited by 45
“Due to the proliferation of Power Electronics based systems, and aware of the lack of expressions for non-sinusoidal magnetization cases, the Improved Generalized Steinmetz Equation (IGSE) [19] was introduced among other modified expressions and it is applied within this design methodology.”
MethodClassification and comparative evaluation of PV panel integrated DC-DC converter concepts
Kasper, M., Bortis, D., Friedli, T., & Kolar, J. W. (2012) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/epepemc.2012.6397403 · Cited by 40
“The core losses of the inductor can be calculated for nonsinusoidal flux waveforms with the improved generalized Steinmetz equation [33] which yields the power loss per unit volume”
MethodBadstuebner, U., Biela, J., Faessler, B., Hoesli, D., & Kolar, J. W. (2009) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2009.4802627 · Cited by 40
Arruti, A., Anzola, J., Perez-Cebolla, F. J., Aizpuru, I., & Mazuela, M. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3323577 · Cited by 39
Hilal, A., Raulet, M., Martín, C., & Sixdenier, F. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2330952 · Cited by 45
“Other improved formulas of SE like MSE [9], GSE [10], iGSE [11], and i2GSE [12] give better results but still limited due to their parameters variation as function of waveform, frequency and dc bias.”
MethodA Novel AC Power Loss Model for Ferrite Power Inductors
Stoyka, K., Capua, G. D., & Femia, N. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2848109 · Cited by 39
“According to the i-GSE [30], the average core loss is given as”
MethodReliability Evaluation of Isolated Buck-Boost DC-DC Series Resonant Converter
Bakeer, A., Chub, A., & Shen, Y. (2022) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2022.3157200 · Cited by 41
Comparative evaluation of soft-switching concepts for bi-directional buck+boost dc-dc converters
Waffler, S., & Kolar, J. W. (2010) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2010.5542152 · Cited by 44
“given in [20] extended by the displacement factor DPF to consider the increase of the losses under dc bias.”
BackgroundMultiobjective Optimization and Topology Selection for a Module-Integrated Inverter
Mirjafari, M., Harb, S. M., & Balog, R. S. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2353055 · Cited by 38
“In order to calculate core losses in an inductor or transformer in the presence of an ac nonsinusoidal waveform, an extension of the Steinmetz equation, called natural Steinmetz equation [22], [27] is used”
MethodFlux and Loss Map Based Evaluation of the Efficiency Map of Synchronous Machines
Ferrari, S., Ragazzo, P., Dilevrano, G., & Pellegrino, G. (2022) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2022.3221381 · Cited by 38
“The formulation (8) is enhanced for the hysteresis part in [15] with the improved generalized Steinmetz equation (iGSE).”
BackgroundSurvey of modelling techniques used in optimisation of power electronic components
Mirjafari, M., & Balog, R. S. (2014) · IET Power Electronics · doi:10.1049/iet-pel.2013.0321 · Cited by 41
Hatakeyama, T., & Onda, K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2306755 · Cited by 36
Design of an Electric Propulsion System for a Quadrotor Unmanned Aerial Vehicle
Stepaniak, M. J., van Graas, F., & de Haag, M. U. (2009) · Journal of Aircraft · doi:10.2514/1.38409 · Cited by 35
Novel iGSE-C Loss Modeling of X7R Ceramic Capacitors
Menzi, D., Bortis, D., Zulauf, G. D., Heller, M. J., & Kolar, J. W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.2996010 · Cited by 35
“A Steinmetz-based capacitor loss model is developed analogously to the well-known large-signal approach for ferromagnetic components, and we first review the conventional [17] and improved generalized steinmetz equation (iGSE) [18] for inductors to ground the proposed model.”
BackgroundMethodInfluentialInvestigation and Modeling of DC Bias Impact on Core Losses at High Frequency
Sanusi, B. N., Zambach, M., Frandsen, C., Beleggia, M., Jørgensen, A. M., & Ouyang, Z. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3249106 · Cited by 35
“Out of many previously proposed core losses modeling [8], [10], [13], [24], [28], the method in [24] and one similar to [46] will be”
BackgroundMethodInfluentialAnalysis of rotary transformer concepts for high-speed applications
Bortis, D., Fassler, L., Looser, A., & Kolar, J. W. (2013) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2013.6520768 · Cited by 35
“For a non-sinusoidal flux density waveforms the improved generalized Steinmetz equation proposed in [13] has to be used.”
MethodTowards virtual prototyping and comprehensive multi-objective optimisation in power electronics
Biela, J., Kolar, J. W., Stupar, A., Drofenik, U., & Musing, A. M. (2010) · Repository for Publications and Research Data (ETH Zurich) · doi:10.3929/ethz-c-000158601 · Cited by 52
Improved core loss calculation for magnetic components employed in power electronic system
Mühlethaler, J., Biela, J., Kolar, J. W., & Ecklebe, A. (2011) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2011.5744829 · Cited by 35
“in [4] a method how to deal with minor hysteresis loops is presented and some minor changes on the equation are made.”
BackgroundMethodInfluentialMeasurement and Modeling of Iron Losses in Electrical Machines
Krings, A., Nategh, S., Stening, A., Grop, H., Wallmark, O., & Soulard, J. (2012) · Cited by 35
Efficiency improvement of an IPMSM using Maximum Efficiency operating strategy
Pohlenz, D., & Böcker, J. (2010) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/epepemc.2010.5606831 · Cited by 34
“[7] shows the accuracy of the power loss calculation with the improved Steinmetz equation.”
Method48 V-to-1 V Transformerless Stacked Active Bridge Converters with Merged Regulation Stage
Zhu, J., & Maksimović, D. (2020) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel49091.2020.9265671 · Cited by 34
“Inductor copper losses are estimated based on ac resistance found by finite-element analysis as shown in Table I, while core losses are estimated using the iGSE method [19],.”
MethodPredicting inductance roll-off with dc excitations
Pollock, J. D., Lundquist, W., & Sullivan, C. R. (2011) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2011.6064051 · Cited by 36
Self-citationShen, W., Wang, F., Boroyevich, D., & Tipton, C. W. (2007) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apex.2007.357500 · Cited by 33
“For square waveforms, which are the most popular waveforms in PWM converters, Modified Steinmetz [14], Generalized Steinmetz [15] equations, improved [19], and Natural Steinmetz Extension [27], [28] methods have been developed to extend the to arbitrary waveforms, through correlating the rate of change of flux density…”
MethodA Dual-Active-Bridge-Based Novel Single-Stage Low Device Count DC–AC Converter
Chakraborty, S., & Chattopadhyay, S. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2836181 · Cited by 35
Modeling and Design of High-Power, High-Current-Ripple Planar Inductors
Gao, Y., Sankaranarayanan, V., Dede, E. M., Zhou, Y., Zhou, F., Erickson, R. W., & Maksimović, D. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3132563 · Cited by 34
Garcia, R., Mejía, A. E., George, K., & Balda, J. C. (2014) · IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg.2014.6878680 · Cited by 33
Comparison of Three-Phase DC-DC Converters vs. Single-Phase DC-DC Converters
Dick, C., Konig, A. S., & Doncker, R. W. D. (2007) · International Conference on Power Electronics and Drive Systems · doi:10.1109/peds.2007.4487703 · Cited by 33
Effects of Secondary Leakage Inductance on the LLC Resonant Converter
Noah, M., Shirakawa, T., Umetani, K., Imaoka, J., Yamamoto, M., & Hiraki, E. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2911093 · Cited by 33
“The core loss is estimated using the improved generalized Steinmetz equation iGSE [32]”
MethodA Family of Transformerless Stacked Active Bridge Converters
Zhu, J., & Maksimović, D. (2019) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2019.8721857 · Cited by 32
“Core losses are modeled using the iGSE method described in [21].”
Method
Metadata
- Authors
- Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H.
- Affiliations
- Dartmouth College (US)
- Universidad de Buenos Aires (AR)
- Venue
- 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings.
- Publisher
- IEEE
- Published
- 2003-06-26
- Pages
- 36-41
- ISSN
- 2151-0997 (ISSN-L)
- OpenAlex
- W2109185194
- Cited by
- 1,145
- References
- 23
- Citations by year
- 2026: 49 · 2025: 76 · 2024: 105 · 2023: 82 · 2022: 99 · 2021: 85 · 2020: 104 · 2019: 86 · 2018: 66 · 2017: 67 · 2016: 57 · 2015: 45 · 2014: 47 · 2013: 40 · 2012: 33
- FWCI
- 5.50
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE ... Workshop on Control and Modeling for Power Electronics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Magnetic Properties and Synthesis of Ferrites
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Keywords
- non-sinusoidal waveforms, hysteresis loss, recursive algorithm, magnetic materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.