Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
An improved calculation of ferrite core loss for nonsinusoidal waveforms separates a flux trajectory into major and minor loops via a new recursive algorithm. It is highly accurate and outperforms two previous methods for our measured data. The only characteristics of the material required are the standard Steinmetz-equation parameters.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
General properties of power losses in soft ferromagnetic materials
Bertotti, G. (1988) · IEEE Transactions on Magnetics · doi:10.1109/20.43994 · Cited by 2,162 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Mathematical models of hysteresis
Mayergoyz, I. (1986) · IEEE Transactions on Magnetics · doi:10.1109/tmag.1986.1064347 · Cited by 1,166
[Mathematical models of hysteresis]
Mayergoyz, I. D. (1991) · doi:10.2172/6911694 · Cited by 708
Soft Ferrites—Properties and Applications
Brailsford, F. (1970) · Electronics and Power · doi:10.1049/ep.1970.0192 · Cited by 613
Improved calculation of core loss with nonsinusoidal waveforms
Li, J., Abdallah, T., & Sullivan, C. R. (2002) · Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248) · doi:10.1109/ias.2001.955931 · Cited by 531 · cited 10×
“In [6], the MSE and GSE are compared with experimental data, and while both provide a vastly better approximation than the basic Steinmetz equation (1), and the GSE avoids some problems exhibited in the MSE, each has significant error in at least one region.”
BackgroundMethodResultInfluentialSelf-citation(1998) · doi:10.1016/b978-0-12-093270-2.x5048-x · Cited by 487
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation
Reinert, J., Brockmeyer, A., & De Doncker, R. W. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.806023 · Cited by 409 · cited 4×
“The consideration of these Axioms 1 and 2 allows one to see that the MSE [5] and the model in [20] cannot be expected to work well for truly general consideration of many different possible waveforms; the problems with the MSE were confirmed experimentally in [5].”
BackgroundMethodInfluentialSteinmetz, C. P. (1892) · Transactions of the American Institute of Electrical Engineers · doi:10.1109/t-aiee.1892.5570437 · Cited by 407 · cited 1×
“A similar equation, but without the frequency dependence, was proposed by Steinmetz in 1892 [3], and so (1) is often referred to as the Steinmetz equation.”
BackgroundAn improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform
Fiorillo, F., & Novikov, A. (1990) · IEEE Transactions on Magnetics · doi:10.1109/20.104905 · Cited by 382 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Albach, M., Durbaum, T., & Brockmeyer, A. (2002) · PESC Record. 27th Annual IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1996.548774 · Cited by 225
Research works printed but not linked: 4
- vorperian, 2002, Using fractals to model eddy-current losses in ferromagnetic materials, Switching power Magazine, 3, 18
- mulder, 1995, Power ferrite loss formulas for transformer design, Powerconversion and Intelligent Motion, 21, 22
- 2000, MATLAB Version 6
- ridley, 2002, Modeling ferrite core losses, Switching power Magazine, 3, 6
Cited by
Items 601–700 of 1,000
Ding, S., Zhao, Z., Liu, Q., Hong, F., Nie, C., Li, L., Chen, L., Sun, W., Qian, Q., & Ji, B. (2024) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2024.3447776 · Cited by 7
Identification of ferrite core inductors parameters by evolutionary algorithms
Stoyka, K., Capua, G. D., Cioppa, A. D., Femia, N., & Spagnuolo, G. (2015) · IEEE International Conference on Industrial Informatics (INDIN) · doi:10.1109/indin.2015.7281981 · Cited by 8
Comparison of four power electronic transformer topologies on unbalanced load correction capacity
Ouyang, S., Liu, J., Wang, X., Song, S., & Hou, X. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310183 · Cited by 7
“core V M P P V (10) The improved generalized Steinmetz equation(11)[8][9] is used to obtain the unit core loss.”
MethodTang, Y., Zhu, F., Ma, J., & Ma, H. (2014) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2014.6864644 · Cited by 7
“In recent decades, some practical approaches are proposed in [9]-[11] based on the modified Steinmetz equation: the MSE is analyzed in [9] according to the thought that core loss is dependent on dB/dt; the GSE and the iGSE are established and improved in [10] and [11].”
MethodMarxgut, C., Biela, J., & Kolar, J. W. (2010) · International Conference on Integrated Power Electronics Systems (CIPS) · Cited by 7
A transient core loss analysis of multiple-gap inductor designed for the 2010 Prius
Wasekura, M., Wang, C., & Lorenz, R. D. (2014) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2014.6953692 · Cited by 7
“Because of parameter compatibility to the Steinmetz equation, final forms of most modern magnetic loss models are in the frequency domain [8-11].”
MethodIron Loss Calculation of AC Filter Inductor for Three Phase PWM Inverters
Matsumori, H., Shimizu, T., Takano, K., & Ishii, H. (2013) · IEEJ Transactions on Industry Applications · doi:10.1541/ieejias.133.1009 · Cited by 7
A Graduate Magnetic Design Course in a Power Electronics-Oriented Curriculum
Acero, J., & Carretero, C. (2020) · IEEE Transactions on Education · doi:10.1109/te.2020.3030766 · Cited by 7
Thakur, S., Gohil, G., & Balsara, P. T. (2021) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec42165.2021.9487180 · Cited by 7
A Hybrid Solid State Transformer (HSST) based on Two-Stage Medium Voltage SST
Rajendran, S., Guo, Z., & Huang, A. Q. (2022) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon49645.2022.9968847 · Cited by 8
Holguín, F. A., Prieto, R., Asensi, R., & Cobos, J. A. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310457 · Cited by 7
Prediction of inductor AC power loss in PSiP buck converter based on Steinmetz parameters
Kandeel, Y., Orabi, M., El-Nemr, M. K., & Youssef, M. Z. (2014) · International Telecommunications Energy Conference (INTELEC) · doi:10.1109/intlec.2014.6972207 · Cited by 7
Bakker, R., & Duffy, M. C. (2018) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2018.8341044 · Cited by 7
“Unfortunately, it is a little more complicated as the different frequency components cannot be treated separately and have significant interaction with one another [18].”
BackgroundKiani, M. H., & Stauth, J. T. (2018) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2018.8460037 · Cited by 7
“The Improved Generalized Steinmetz Equation (iGSE) [12] can be used to effectively model the overall loss in the core per unit volume for non-sinusoidal current waveforms:”
BackgroundMethodSeo, G., Mukherjee, S., Roy, J., Goodrick, K. J., Mallik, R., Majmunović, B., Dutta, S., Maksimović, D., & Johnson, B. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8913063 · Cited by 7
Wide-Range Operation of High Step-Up DC-DC Converters with Multimode Rectifiers
Chub, A., Vinnikov, D., Korkh, O., Jalakas, T., & Demidova, G. L. (2021) · Electronics · doi:10.3390/electronics10080914 · Cited by 7
“The improved generalized Steinmetz equation (iGSE) method [36] was adopted for the calculation of the transformer core losses:”
MethodHigh-Frequency LLC Converter with Narrow Frequency Variations for Aircraft Applications
de Juan, A., Serrano, D., Alou, P., Mamousse, J.-N., Denieport, R., & Vasić, M. (2022) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43599.2022.9773409 · Cited by 7
“This way, the main variables of the design, such as the gap, the number of turns and approximated values of winding losses (assumed to be three times the DC losses) and core losses (derived using the Steinmetz equation) were obtained.”
BackgroundNovel evaluation method for the volume of transformers with various magnetic cores
Hatakeyama, T., & Onda, K. (2011) · IEEE International Conference on Power Electronics and Drive Systems (PEDS) · doi:10.1109/peds.2011.6147292 · Cited by 7
Agarwal, R., Martin, S., Shi, Y., & Li, H. (2019) · 2019 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8912736 · Cited by 6
Guo, Z.-C., Cao, B., Chen, C., & Huang, A. Q. (2026) · IEEE transactions on power electronics · doi:10.1109/tpel.2026.3654531 · Cited by 6
“To take the time history of magnetic material into account, the improved GSE (IGSE) [57] model is proposed.”
Zhang, Z., He, H., Yu, H., Li, K., Bian, K., & Chen, W. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3258523 · Cited by 6
“Under nonsinusoidal excitation, the equation most widely used to calculate the transformer ferromagnetic loss is the improved generalized Steinmetz equation [44], [45]”
MethodTong, L., Chen, Y., Cheng, C., Yu, C., Shang, Y., & Kang, Y. C. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3543192 · Cited by 6
“The MFT core loss is calculated by the improved generalized Steinmetz equation [49].”
Jin, H., Pei, Y., Wang, L., Wang, G., Dong, X., & Zhou, Q. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3617657 · Cited by 6
“P Lcore can be derived according to improved generalized Steinmetz equation (iGSE) [32] as follows: where α , β , k i are parameters of core material, B Lmax is the maximum magnetic flux density of the inductor, and V L(core) is the volume of external series inductor’s core.”
Iron Loss Calculation of AC Filter Inductor for Three‐Phase PWM Inverters
Matsumori, H., Shimizu, T., Takano, K., & Ishii, H. (2014) · Electrical Engineering in Japan · doi:10.1002/eej.22688 · Cited by 6
“In the case when the calculation method presented in [1], [5], and [6] are used, the calculation error appears when dB/dt varies without changing sign, such as segment c-f in Fig.”
MethodComparison of high frequency inductors for bidirectional DC-DC converters for electric vehicles
Sarriegui, G., Beushausen, S., & Doncker, R. W. D. (2016) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2016.7695532 · Cited by 9
Active source current filtering to minimize the DC-link capacitor in switched reluctance drives
Klein‐Hessling, A., Burkhart, B., & Doncker, R. W. D. (2016) · IEEE Annual Southern Power Electronics Conference · doi:10.1109/spec.2016.7846034 · Cited by 6
“Due to the non-sinusoidal current waveform again the improved generalized Steinmetz equation (iGSE) is used [12].”
MethodOptimal Design of an AC Filtering Inductor for a 3-Phase PWM Inverter Including Saturation Effect
Voldoire, A., Schanen, J., Ferrieux, J. P., Gautier, C., & Saber, C. (2019) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc.2019.8697246 · Cited by 6
“Losses expression The iGSE model [10] is an accurate analytical model which expresses the core losses for inductors.”
MethodDesign and optimization of high-efficiency 1W 500V-12V isolated low-cost DC/DC converter
Foray, E., Martín, C., & Allard, B. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215746 · Cited by 7
“Core losses are calculated using the material parameters and the improved Generalized Steinmetz Equation (iGSE) [17] with a trapezoidal waveform of primary current.”
MethodCore Loss Prediction in Power Electronic Converters Based on Steinmetz Parameters
Tacca, H. E. (2020) · IEEE Congreso Bienal de Argentina (ARGENCON) · doi:10.1109/argencon49523.2020.9505470 · Cited by 6
Self-citationA low-loss inductor structure and design guidelines for high-frequency applications
Yang, R. S., Hanson, A. J., Perreault, D. J., & Sullivan, C. R. (2018) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2018.8341070 · Cited by 6
“Analytical models of the conductor loss [12]–[17] and the core loss [18], [19] have been developed, with some work targeting the HF range [20].”
BackgroundSelf-citationDesign and Optimization of Planar Magnetics for a Quadruple-Active-Bridge Converter
Singhabahu, C., Singh, A., Hasnain, A., Yadav, A. K., Chen, J., & Khaligh, A. (2022) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias54023.2022.9940127 · Cited by 6
Menzi, D., Heller, M. J., Kerridge, G., Marley, P. M., Ellmore, A., Ben‐Yaakov, S., & Kolar, J. W. (2023) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2023.3240838 · Cited by 6
“monotonic excitation waveforms, major-minor loop splitting is performed with Q in (7) equal to the excitation of the respective loop as highlighted in [9], [13].”
MethodApplication Prospects of Hybrid Magnetic Circuits in High Frequency Power Transformers
Paul, A. K. (2023) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2023.3264902 · Cited by 6
Xie, T., & Le, H. (2023) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43580.2023.10131344 · Cited by 6
A 200-kHz/1.5-kW Multi-winding Transformer for Lunar Surface Power Applications
Zhang, Z., Bharmal, N., Zhang, Y., Fan, J., Yao, Y., Guenther, R., Fu, P., & Wang, J. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362279 · Cited by 6
“Studies from [5] [6] [7] [8] also provide valuable insights into the cryogenic characteristics of powder core, ferrite core, nanocrystalline (NC) core, and amorphous materials (AM) core .”
BackgroundA High-Efficiency and High-Power-Density Partial Power Buck-Boost Converter
Wu, D., Wang, P., Lyu, Y., Andersen, M. A. E., & Ouyang, Z. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3406132 · Cited by 6
“These losses can be quantified using the following equation [37]: Table VI presents key Steinmetz parameters obtained from material datasheets, including the loss coefficient ( k loss ), exponent ( α ), and exponent ( β ).”
MethodRasekh, N., Wang, J., & Yuan, X. (2024) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2024.3406198 · Cited by 6
“Based on sinusoidal excitations and simplified operating conditions, well-known core loss models and datasets are developed [1], [2], [6], [7], [8].”
BackgroundMethodInfluentialYi, L., & Moon, J. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3426283 · Cited by 6
“There have been efforts to enhance the applicability and accuracy of the original Steinmetz in expanded settings—notably modified Steinmetz equation (mse) [15], generalized Steinmetz equation (GSE) [16], and improved GSE (iGSE) [17].”
Class-D Amplifier-Based Core Loss Measurements for High Frequency Magnetic Materials
Anderson, J. R., Kirkby, N. J., & Ranjram, M. K. (2024) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel57542.2024.10614013 · Cited by 6
“The loss data provided is limited and designers generally use these materials outside of their tested specifications, often attempting to extrapolate expected performance via analytical methods [13]–[15].”
BackgroundQueiroz, S. S., & Costa, L. F. (2024) · IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg61800.2024.10667434 · Cited by 6
“For the core losses, the generalized Steinmetz equation is used [18].”
MethodAn Efficient High-Power-Density Integrated Trap-LCL Filter for Inverters
Mazloum, N., & Khajehoddin, S. A. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3473849 · Cited by 6
“To estimate the core losses with higher accuracy, the effect of the variation of flux in one switching cycle in addition to the line frequency variations is also considered in the loss calculations using the iGSE method presented in [39].”
InfluentialModular Power Electronic Converters in the Power Range 1 to 10 kW
Klimczak, P. (2009) · Cited by 6
A generic virtual prototyping tool for multilevel modular converters (MMCs)
Am, S., Lefranc, P., Frey, D., & Ibrahim, M. A. A. (2015) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2015.7392311 · Cited by 7
“Then the inductor losses (core loss (Steinmetz (22) [26]) and winding losses (24) are computed as a function of its geometry variables, arm current (iuj,ilj), and also materials (detail are given in [22]).”
MethodEvaluation of core loss calculation methods for highly nonsinusoidal inputs
Smailes, M., Θεοτοκάτος, Γ., Shek, J. K. H., Ng, C. Y., Mckeever, P., Fox, R., & Abusara, M. A. (2015) · IET International Conference on AC and DC Power Transmission (ACDC) · doi:10.1049/cp.2015.0005 · Cited by 6
A simple core loss modeling for three-phase PWM voltage source converters
Javidi, N. F., Kouchaki, A., & Nymand, M. (2015) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2015.7392570 · Cited by 6
“The improved Generalized Steinmetz Equation, iGES; is capable of calculating the core losses for any flux waveform with SE parameters [3].”
MethodWang, J., Dagan, K. J., & Yuan, X. (2019) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2019.8722114 · Cited by 6
Onay, H., Suel, V., Ozgen, T., & Hava, A. M. (2019) · European Conference on Power Electronics and Applications · doi:10.23919/epe.2019.8915387 · Cited by 6
“However, SE is only valid for cores with sinusoidal excitations without DC bias as discussed in [5], [6], and [10].”
BackgroundParallel Frameworks for Robust Optimization of Medium-Frequency Transformers
Booth, K., Subramanyan, H., Líu, J., & Lukic, S. M. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3042527 · Cited by 7
Salinas, G., Serrano-Vargas, J. A., Muñoz–Antón, J., & Alou, P. (2021) · Energies · doi:10.3390/en14113075 · Cited by 6
“First of all, the Steinmetz equation is used to estimate the core losses [31,32].”
MethodDesign and Optimization of the High Frequency Transformer for 100kW CLLC Converter
Zhao, Z., Wu, Y., Du, X., & Zhao, Y. (2021) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec42165.2021.9487200 · Cited by 7
“For the core loss, the improved generalized Steinmetz equation (IGSE) is proved to have improved accuracy than the original Steinmetz equation especially for non-sinusoidal excitation [16].”
MethodOptimal Integrated Design of a Magnetically Coupled Interleaved H-Bridge
Stratta, A., Gottardo, D., Nardo, M. D., Espina, J., Lillo, L. D., Empringham, L., & Johnson, C. M. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3094025 · Cited by 6
A Framework for Code Division Multiple Access Wireless Power Transfer
Sarin, A., & Avestruz, A.-T. (2021) · IEEE Access · doi:10.1109/access.2021.3116114 · Cited by 6
“The accurate prediction of core loss may require more advanced methods like iGSE [50] and is a topic for future research.”
MethodA Weighted Efficiency Enhancement Method for Coupled Inductor Filter-Based H-Bridge Inverters
Jiang, J., Pan, S., Shen, H., Gong, J., Liu, F., Zha, X., & Zhuang, Y. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3134266 · Cited by 6
Magnetic Core Losses under Square-wave Excitation and DC Bias in High Frequency Regime
Sanusi, B. N., & Ouyang, Z. (2022) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43599.2022.9773563 · Cited by 6
Fritz, N., Heidenberger, D., Fronczek, C., Bündgen, D., & Doncker, R. W. D. (2022) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel53829.2022.9829948 · Cited by 6
Inductor design methods with low-permeability RF core materials
Han, Y., & Perreault, D. J. (2010) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2010.5618453 · Cited by 6
An axial flux flywheel motor/generator for pulsed power application
Dong, J., Huang, Y., Shen, P., Jin, L., & Ge, B. (2012) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342755 · Cited by 6
Comparative evaluation of modulation schemes for grid-connected parallel interleaved inverters
Gohil, G., Bede, L., Teodorescu, R., Kerekes, T., & Blaabjerg, F. (2016) · IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg.2016.7527074 · Cited by 6
“In this case, the core losses can be accurately evaluated using the IGSE [26].”
MethodLee, Y., Vakil, G. I., Watson, A. J., & Wheeler, P. W. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8095826 · Cited by 6
“order to validate the core losses under non-sinusoidal excitation, the improved generalized Steinmetz equation (iGSE) [13] has been generally used.”
MethodCore-Type Transformer Design Method with Integrated Series Inductance for DC-DC Converters
Kaymak, M., Fincan, M. E., & Doncker, R. W. D. (2019) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2019-ecceasia42246.2019.8796868 · Cited by 6
“The characteristics of the dc-dc converter system has a significant effect on the core [13] and winding [14] losses of the MFT.”
BackgroundTorque Harmonics Minimization of Double-Stage Magnetic Gear Transmission System
Floris, A., Serpi, A., Damiano, A., & Hahn, I. (2019) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2019.8926636 · Cited by 6
“The losses evaluation can be made by post-processing of the Finite Element Analysis (FEA) results, which are achieved by means of the software FEMM, and using the MATLAB script published in [10].”
MethodRahman, D., Awal, M. A., Islam, M. S., Yu, W., & Husain, I. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9236118 · Cited by 6
Thakur, S., Gohil, G., & Balsara, P. T. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9235718 · Cited by 6
“10b, respectively [13], [16], Pfe,ind = kf α s B β m (10a)”
BackgroundImpact of Steinmetz Parameters on the Performance of iGSE based Core Loss Prediction
Syed, A., Vakil, G. I., & Kumar, R. M. R. (2021) · IEEE International Conference on Sustainable Energy and Future Electric Transportation (SEFET) · doi:10.1109/sefet48154.2021.9375673 · Cited by 6
“The method of separating the major and minor loops is explained in [9].”
BackgroundMethodBakeer, A., Chub, A., Blinov, A., & Lai, J. (2021) · Energies · doi:10.3390/en14082051 · Cited by 6
“The losses model of the semiconductors has been adopted from work in [21], while the core losses are estimated based on the im‐ proved generalized Steinmetz equation [22].”
MethodStevanovic, B., Cóbreces, S., Serban, E., Alou, P., Ordonez, M., & Vasić, M. (2021) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce47101.2021.9595248 · Cited by 6
“Inductor core losses are calculated by iGSE which is discussed in [24] and implemented in [25].”
MethodStrothmann, B., Schafmeister, F., & Böcker, J. (2019) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2019.8721850 · Cited by 6
“The advantage of iGSE is that it takes into account non-sinusoidal currents, as they occur in buck converters, and only the material parameters α, β, and k, known from the simple Steinmetz Equation, are required [5], [6].”
BackgroundScaling Conception of Energy Loss' Separation in Soft Magnetic MaterialsPreprint
Sokalski, K., Szczygłowski, J., & Wilczyński, W. (2011) · arXiv (Cornell University) · doi:10.48550/arxiv.1111.0939 · Cited by 6
Ultra-Fast and Compact GaN-Based Power Amplifier as an Arbitrary Voltage Generator
Lazarević, V. Ž. (2021) · UPM Digital Archive (Technical University of Madrid) · doi:10.20868/upm.thesis.68980 · Cited by 6
Loss Evaluation of Magnetic Devices Used in Power Converters
Shimizu, T. (2023) · IEEJ Transactions on Electrical and Electronic Engineering · doi:10.1002/tee.23879 · Cited by 5
Efficiency and Cost Optimization of Dual Active Bridge Converter for 350kW DC Fast Chargers
Cinik, S., Zhao, F., Falco, G. D., & Wang, X. (2024) · Energy Conversion Congress and Expo Europe (ECCE Europe) · doi:10.1109/ecceeurope62508.2024.10752065 · Cited by 5
“Calculate Core Loss: The core losses ( P core ) in this study are calculated by using the improved generalized Steinmetz equation as described in [10] which allows to determine the core losses also for piece-wise linear waveforms.”
Review of Modeling and Analysis of Parasitics in Power Electronic Converters*
Wang, J., Chen, M., Yu, S., & Zhang, X. (2025) · Chinese Journal of Electrical Engineering · doi:10.23919/cjee.2025.000103 · Cited by 6
Minimum Loss Trajectory Modulation for Single-Stage SR-DAB Based DC/AC Converter
Bao, J., Wang, F., Li, Y., Liu, B., & Duan, S. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3583730 · Cited by 5
“Using the expression in iGSE [48], the loss density can be derived as where k 1 is a constant in the iGSE.”
Dar, A. A., Vikas, P., & Iyer, V. M. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3585936 · Cited by 5
“7(b) includes the core loss, P c , computed using the improved generalized steinmetz equation (iGSE) model [27] and the copper loss, P cu , computed using Dowell’s method (1-”
Ferrite Toroidal Inductor Design
Tacca, H. E. (2009) · IEEE Latin America Transactions · doi:10.1109/tla.2009.5419359 · Cited by 5
Self-citationEffectiveness of Pareto-front analysis applied to the design of a single-phase PFC rectifier
Ibrahim, M. A. A., Gonnet, L., Lefranc, P., Frey, D., Ferrieux, J.-P., & Am, S. (2016) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2016.7468245 · Cited by 8
Estimation of Core Loss of High Frequency Nanocrystalline Transformer for Non-sinusoidal Excitation
Joshi, A., & Nath, S. (2019) · National Power Electronics Conference (NPEC) · doi:10.1109/npec47332.2019.9034857 · Cited by 5
“A typical manufacturer does not provide core loss data for non-sinusoidal exciation [3].”
BackgroundMethodDhole, A., Roy, S. K., & Basu, K. (2021) · National Power Electronics Conference (NPEC) · doi:10.1109/npec52100.2021.9672537 · Cited by 6
Magnetic loss in grain-oriented Fe–Si sheets under different harmonic excitation and high indication
Zhao, H., Liu, W., Zhao, X., & Wu, Y. (2023) · AIP Advances · doi:10.1063/5.0133095 · Cited by 6
Khan, M. S., Nag, S. S., & Das, A. (2023) · European Conference on Power Electronics and Applications · doi:10.23919/epe23ecceeurope58414.2023.10264418 · Cited by 5
New Triple-Output Quad-Active-Bridge DC/DC Converter Employing a Four-Leg Inverter Input Stage
Ohno, T., Mirić, S., Guillod, T., Krismer, F., Huber, J., & Kolar, J. W. (2023) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems59686.2023.10344769 · Cited by 5
“6 is designed following the Pareto optimization method outlined in [25], [26], which takes into account the proximity effect and skin effect for winding loss, a reluctance circuit model considering fringing, core loss utilizing improved generalized Steinmetz equation [27], [28].”
MethodGang, Z., Wu, Y., Xu, J., & Soeiro, T. B. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3395706 · Cited by 5
“…the rms value for each harmonic component in an inductor current I RMS ( nf 0 ) are acquired through simulation in PLECS, n representing the n th order harmonic of the grid frequency f 0 Core losses P core are modeled based on the improved generalized Steinmetz equation described in [32] and [33].”
MethodChen, C., Guo, Z., & Huang, A. Q. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509302 · Cited by 5
“For the core loss, as the transformer will be excited with high frequency square wave, the improved generalized Steinmetz equation [21] is applied By applying the calculated winding loss to the PCB model and applying the calculated core loss to the core model in the thermal FEA, thermal profile of…”
MethodJoint optimization of efficiency and volume for an inductor‐based battery balancing circuit
Jiang, J., Yang, Y., Zhao, E., Li, P., & Luo, W. (2024) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.4097 · Cited by 5
“…frequency fn, switch conduction duty cycle SW, and other parameters, the inductance under each switch frequency is calculated according to Formula (1): L According to the literature [24, 25], we calculate the losses of the balance circuit excluding the inductance at different switching frequencies.”
Ewald, T., & Biela, J. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3429428 · Cited by 5
“In addition to the winding losses, the analysis covers the core losses P c , which are computed for the given excitation using the iGSE [19]: with the effective magnetic volume of the core V e .”
MethodFemia, N., Capua, G. D., Oliva, N., & Guglielmo, L. D. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3443464 · Cited by 5
“Power converter designers commonly rely on empirical formulas to estimate winding and core losses, the latter based on the Stein-metz equation and its relevant variants [15], [16], [17], [18], [19], [20].”
Ishihara, M., Kimura, S., Martinez, W. H., & Yamamoto, M. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310488 · Cited by 5
“First, core losses are calculated using the improved Generalized Steinmetz Equation (iGSE) [13] as follows: Vds2 Vds1”
MethodIron loss evaluation of three-phase inductor for three-phase PWM inverter
Matsumori, H., Shimizu, T., Takano, K., & Hitoshi, I. (2016) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2016.7467944 · Cited by 5
“However, it is difficult to accurately calculate and experimentally verify the core losses in inductive components used in semiconductor power converter because the conventional calculation method is directed to a sine wave and pulse wave excitation [2-10].”
BackgroundEfficiency analysis on DCM interleaved boost power converters
Cervellini, P., Antoszczuk, P., Retegui, R. G., & Funes, M. A. (2017) · Workshop on Information Processing and Control · doi:10.23919/rpic.2017.8214338 · Cited by 5
Modeling and Experimental Verification of Geometry Effects on Core Losses
Mogorovic, M., & Dujić, D. (2019) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2019-ecceasia42246.2019.8796984 · Cited by 5
“(9) Note that a different core loss density model can be used as well - e.g. improved generalized Steinmetz equation (IGSE) [8] for non-sinusoidal excitation waveforms.”
BackgroundProcedure to compare different design methods for implementation-ready high power inductors
Kjeldsen, C. S., Østergaard, C., Nymand, M., & Ramachandran, R. C. (2019) · IEEE International Conference on Compatibility, Power Electronics and Power Engineering · doi:10.1109/cpe.2019.8862336 · Cited by 5
“The core loss is calculated by using the improved Generalized Steinmetz Equation [10].”
MethodAnalytical Winding Power Loss Calculation in Gapped Magnetic Components
Holguín, F. A., Prieto, R., Asensi, R., & Cobos, J. A. (2021) · Electronics · doi:10.3390/electronics10141683 · Cited by 5
“This was performed by pushing a controlled DC current through the device to make it reach the same temperature that was observed during operation; Then, the power loss in the transformer (which includes the core loss) was assumed to be the difference between the total power loss and losses in the semiconductors and…”
MethodMenger, N., Merz, T., Gehringer, J., Sommer, F., & Hiller, M. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9947488 · Cited by 6
“where B is the instantaneous core flux density, ∆B is the peak-to-peak flux density [19].”
BackgroundCharacteristic-Based Design of an LCC Resonant Converter With a Capacitive Filter
Sengupta, A., Kundu, U., & John, V. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3345165 · Cited by 5
“Core losses are computed by substituting the peak flux densities, obtained from the design of the magnetics, into the Steinmetz relation [31].”
MethodDe, A., & Bhattacharya, S. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310369 · Cited by 5
“As the voltage and current stress in the inductor is nonsinusoidal with non-zero DC average, a modified Steinmetz equation/method should be used to estimate the core loss as a function of number of turns and effective area [12].”
MethodIbrahim, M. A. A., Lefranc, P., Frey, D., Gonnet, L., Ferrieux, J.-P., & Am, S. (2015) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2015.7392602 · Cited by 6
Optimal design of medium-frequency transformers for solid-state transformer applications
Beiranvand, H., Rokrok, E., Rezaeealam, B., & Kumar, A. (2017) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc.2017.7910407 · Cited by 6
Deng, Y., Pan, Z., Suryanarayana, H., Kadavelugu, A., Liu, L., Belcastro, C. A., & Paatero, E.-K. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8096585 · Cited by 5
“To deal with non-sinusoidal flux waveforms, several modified expressions have been developed [5].”
EE shape low loss three-phase AC filter inductor design for three-phase PWM inverter
Matsumori, H., & Shimizu, T. (2017) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2017.8216192 · Cited by 5
“The copper loss is calculated from the inductor rms current and the wire resistance as follows: (10) The low-frequency iron loss is calculated by the Steinmetz equation [7],[8] as follows: (11) where is the inductor volume, and , , and are the Steinmetz parameters, which are provided by the manufacturer.”
MethodCirimele, V., Freschi, F., & Guglielmi, P. (2018) · Energies · doi:10.3390/en11071754 · Cited by 5
Metadata
- Authors
- Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H.
- Affiliations
- Dartmouth College (US)
- Universidad de Buenos Aires (AR)
- Venue
- 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings.
- Publisher
- IEEE
- Published
- 2003-06-26
- Pages
- 36-41
- ISSN
- 2151-0997 (ISSN-L)
- OpenAlex
- W2109185194
- Cited by
- 1,145
- References
- 23
- Citations by year
- 2026: 49 · 2025: 76 · 2024: 105 · 2023: 82 · 2022: 99 · 2021: 85 · 2020: 104 · 2019: 86 · 2018: 66 · 2017: 67 · 2016: 57 · 2015: 45 · 2014: 47 · 2013: 40 · 2012: 33
- FWCI
- 5.50
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE ... Workshop on Control and Modeling for Power Electronics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Magnetic Properties and Synthesis of Ferrites
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Keywords
- non-sinusoidal waveforms, hysteresis loss, recursive algorithm, magnetic materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.