Accurate prediction of ferrite core loss with nonsinusoidal waveforms using only Steinmetz parameters
The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Abstract
An improved calculation of ferrite core loss for nonsinusoidal waveforms separates a flux trajectory into major and minor loops via a new recursive algorithm. It is highly accurate and outperforms two previous methods for our measured data. The only characteristics of the material required are the standard Steinmetz-equation parameters.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
General properties of power losses in soft ferromagnetic materials
Bertotti, G. (1988) · IEEE Transactions on Magnetics · doi:10.1109/20.43994 · Cited by 2,162 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Mathematical models of hysteresis
Mayergoyz, I. (1986) · IEEE Transactions on Magnetics · doi:10.1109/tmag.1986.1064347 · Cited by 1,166
[Mathematical models of hysteresis]
Mayergoyz, I. D. (1991) · doi:10.2172/6911694 · Cited by 708
Soft Ferrites—Properties and Applications
Brailsford, F. (1970) · Electronics and Power · doi:10.1049/ep.1970.0192 · Cited by 613
Improved calculation of core loss with nonsinusoidal waveforms
Li, J., Abdallah, T., & Sullivan, C. R. (2002) · Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248) · doi:10.1109/ias.2001.955931 · Cited by 531 · cited 10×
“In [6], the MSE and GSE are compared with experimental data, and while both provide a vastly better approximation than the basic Steinmetz equation (1), and the GSE avoids some problems exhibited in the MSE, each has significant error in at least one region.”
BackgroundMethodResultInfluentialSelf-citation(1998) · doi:10.1016/b978-0-12-093270-2.x5048-x · Cited by 487
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation
Reinert, J., Brockmeyer, A., & De Doncker, R. W. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.806023 · Cited by 409 · cited 4×
“The consideration of these Axioms 1 and 2 allows one to see that the MSE [5] and the model in [20] cannot be expected to work well for truly general consideration of many different possible waveforms; the problems with the MSE were confirmed experimentally in [5].”
BackgroundMethodInfluentialSteinmetz, C. P. (1892) · Transactions of the American Institute of Electrical Engineers · doi:10.1109/t-aiee.1892.5570437 · Cited by 407 · cited 1×
“A similar equation, but without the frequency dependence, was proposed by Steinmetz in 1892 [3], and so (1) is often referred to as the Steinmetz equation.”
BackgroundAn improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform
Fiorillo, F., & Novikov, A. (1990) · IEEE Transactions on Magnetics · doi:10.1109/20.104905 · Cited by 382 · cited 1×
“More detailed models, based on physical phenomena producing loss, have been studied [10], [11], [12], [13], [14], [15], [16], [17], [18], [12], [13].”
Albach, M., Durbaum, T., & Brockmeyer, A. (2002) · PESC Record. 27th Annual IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1996.548774 · Cited by 225
Research works printed but not linked: 4
- vorperian, 2002, Using fractals to model eddy-current losses in ferromagnetic materials, Switching power Magazine, 3, 18
- mulder, 1995, Power ferrite loss formulas for transformer design, Powerconversion and Intelligent Motion, 21, 22
- 2000, MATLAB Version 6
- ridley, 2002, Modeling ferrite core losses, Switching power Magazine, 3, 6
Cited by
Items 501–600 of 1,000
Shen, Z., Xu, B., Liu, C., Hu, C., Bi, L., Xu, Z., Jin, L., & Chen, W. (2022) · Sustainability · doi:10.3390/su141911915 · Cited by 13
“, IGSE, is used to calculate the core loss Ps [38]: Ps = 1 T ∫ T 0 ki ∣∣∣dB(t) dt ∣∣∣α(∆B)b−adt ki = K (2π)α−1 ∫ 2π 0 |cos(θ)| α ·2b−a θ (4)”
Method$\eta _{\text{max}}$-Charging Strategy for Lithium-Ion Batteries: Theory, Design, and Validation
Blasuttigh, N., Beiranvand, H., Pereira, T., Castellan, S., Pavan, A. M., & Liserre, M. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3381644 · Cited by 10
“Consequently, it becomes necessary to compute losses using the improved generalized Steinmetz equation [32] rather than the original Steinmetz Equation.”
MethodHigh frequency core and winding loss modeling
Sullivan, C. R. (2013) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2013.6556339 · Cited by 10
Self-citationDetailed losses Analysis of High-Frequency Planar Power Transformer
Ma, Y., Meng, P., Zhang, J., & Qian, Z. (2007) · International Conference on Power Electronics and Drive Systems · doi:10.1109/peds.2007.4487734 · Cited by 11
“dealing with extremely special waveforms as described in [9,10].”
BackgroundOptimal inductor design for single-phase three-level bridgeless PFC rectifiers
Lange, A. D. B., & Heldwein, M. L. (2017) · Brazilian Power Electronics Conference (COBEP) · doi:10.1109/cobep.2017.8257389 · Cited by 10
“Core Losses The core losses are calculated through the “Improved Generalized Steinmetz Equation” (iGSE) method [5].”
MethodPark, S., Kim, M., Jeong, H., Kim, K. A., Kim, T.-W., Kim, A.-R., & Jung, J. (2019) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2019-ecceasia42246.2019.8796900 · Cited by 10
“Therefore, the magnetizing inductance of the bidirectional flyback converter is designed to operate in the boundary conduction mode (BCM) having the largest magnetizing inductance in the discontinuous conduction mode section [4].”
MethodModelling of dynamic losses in soft ferrite cores
Rimal, H. P., Ghanim, A. M., Antonio, S. Q., Lozito, G. M., Faba, A., & Cardelli, E. (2019) · Physica B Condensed Matter · doi:10.1016/j.physb.2019.411811 · Cited by 10
Optimization of medium-frequency transformers with large capacity and high insulation requirement
Guo, X., Li, C., Zheng, Z., & Li, Y. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215755 · Cited by 10
Maheri, H. M., Vinnikov, D., Chub, A., Sidorov, V. E., & Liivik, E. (2020) · Energies · doi:10.3390/en13215645 · Cited by 10
“The core losses could be calculated using the approach presented in [21,22].”
MethodCostinett, D. J., Maksimović, D., Zane, R. A., Rodríguez, A., & Vázquez, A. (2013) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2013.6626466 · Cited by 10
“Inductor core losses are calculated using the NSE/iGSE, with Steinmetz parameters adjusted for individual curve fits at each switching frequency [26], [27].”
MethodCooling Concepts for High Power Density Magnetic Devices
Biela, J., & Kolar, J. W. (2008) · IEEJ Transactions on Industry Applications · doi:10.1541/ieejias.128.500 · Cited by 10
Soft Magnetic Materials Characterization for Power Electronics Applications and Advanced Data Sheets
Moon, S. R., Ohodnicki, P. R., Byerly, K., & Beddingfield, R. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8912157 · Cited by 10
Tacca, H. E. (2002) · doi:10.13140/2.1.2837.5363 · Cited by 10
Self-citationA Three-Phase Unfolding-Based Solid-State Traction Transformer for Railway Application
Khan, A., Nag, S. S., & Singh, B. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3529467 · Cited by 10
“Inductor copper loss is calculated using the rms equations derived in the previous section, while core loss is evaluated using the improved generalized Steinmetz equation [32].”
In-Depth Review of Planar Transformer Modeling and Optimization: Challenges and Perspectives
Groon, F., Beiranvand, H., & Liserre, M. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3622943 · Cited by 10
“The flux curve has to be split into major and minor loops, however, Venkatachalam et al. [74] provided a Matlab script for this purpose.”
Shen, X., Zhong, H., & Han, R. (2026) · Magnetochemistry · doi:10.3390/magnetochemistry12010007 · Cited by 9
“Venkatachalam et al. [10] proposed an improved generalized Steinmetz equation (iGSE) to separate the primary and secondary hysteresis circuits and calculate the respective losses through a recursive algorithm.”
FEA modeling of the low profile coupled inductor with non-uniform flux distribution
Su, Y., Li, Q., & Lee, F. C. (2013) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2013.6520634 · Cited by 9
“It is interesting to find that IGSE, NSE and EEL actually come to the same result.”
MethodThermally-Compensated Magnetic Core Loss Model for Time-Domain Simulations of Electrical Circuits
Djekanovic, N., Luo, M., & Dujić, D. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3053303 · Cited by 11
“According to [25], the IGSE is given by the following relation:”
BackgroundFang, Z., Dong, H., Sun, H., Xie, F., & Huang, Z. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3174390 · Cited by 10
“To evaluate the core loss with arbitrary magnetic flux waveforms, the generalized Steinmetz equation (GSE) [31] can be used as given by”
Method12-pulse Rectifier with DC-Side Buck Converter for Electric Vehicle Fast Charging
Lan, D. C., Wu, Y., Soeiro, T. B., Granello, P., Qin, Z., & Bauer, P. (2022) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon49645.2022.9968872 · Cited by 9
“As the current is time-varying and non-sinusoidal, Improved Generalized Steinmetz Equation (IGSE) is used for calculating the core loss of the inductors and transformers [17].”
MethodOptimizing Current-Fed, GaN-Based DC-DC Converters for Electrolysis Applications
Fritz, N., Sechel, T., Kowalewski, P., & Doncker, R. W. D. (2023) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2023-ecceasia54778.2023.10213649 · Cited by 9
“The core losses in the transformer and the inductors were calculated after the simulation, using the simulation waveforms, the core dimensions, and the “coreloss2” tool developed by [32] using the Steinmetz parameters of the ferrites which were taken from the loss characteristics in the material data sheets.”
MethodChen, L.-C., Bagci, F. S., & Kim, K. A. (2023) · IEEE Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia) · doi:10.1109/wipdaasia58218.2023.10261924 · Cited by 10
Design and Testing of a Soft-Switching Solid-State Transformer Module
Ren, X., Jiang, Y., Weng, H., Long, T., & Xu, D. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3447455 · Cited by 9
“1) Core Loss Calculation: Utilizing the improved generalized Steinmetz equation (iGSE) equation, one can obtain the core loss per unit volume P c ,v [24].”
Shi, H., & Jin, Z. (2025) · IEEE Access · doi:10.1109/access.2025.3562736 · Cited by 9
“To address these issues, researchers have proposed improved models, such as the iGSE model [8] and the MSE model [9], which enhance the evaluation accuracy of core losses to some extent.”
Optimal design of a 3.5 kV/11kW DC-DC converter for charging capacitor banks of power modulators
Ortiz, G., Bortis, D., Biela, J., & Kolar, J. W. (2009) · IEEE International Pulsed Power Conference (PPC) · doi:10.1109/ppc.2009.5386216 · Cited by 9
“The core losses are calculated by using the Steinmetz equation for non-sinusoidal waveforms [6], whereas the Steinmetz parameter are extracted from the core manufacturer’s datasheets.”
MethodOptimum design approach of high frequency transformer
Barg, S., Ammous, K., Mejbri, H., Alahdal, A., & Ammous, A. (2016) · Asia-Pacific International Symposium on Electromagnetic Compatibility (APEMC) · doi:10.1109/apemc.2016.7522796 · Cited by 9
Scaling-Based Analysis and Modelling of Power Losses in Amorphous and Nanocrystalline Alloys
Najgebauer, M. (2017) · Acta Physica Polonica A · doi:10.12693/aphyspola.131.1225 · Cited by 9
Hurley, W. G., & Wolfle, W. H. (2013) · Wiley eBooks · doi:10.1002/9781118544648.ch5 · Cited by 10
Cost-Volume-Reliability Pareto Optimization of a Photovoltaic Microinverter
Shen, Y., Song, S., Wang, H., & Blaabjerg, F. (2019) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2019.8722043 · Cited by 9
“The core loss density can be calculated with the improved generalized Steinmetz equation (iGSE) [23].”
MethodHigh Power/Current Inductor Loss Measurement with Improved Shunt Resistor Construction
Huang, P.-Y., & Shimizu, T. (2019) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.8.669 · Cited by 9
Jamali-Fard, A., & Mirsalim, M. (2022) · COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering · doi:10.1108/compel-07-2021-0251 · Cited by 9
A Resonant Approach to Transformer Loss Characterization
Solomentsev, M., Okeke, O., & Hanson, A. J. (2022) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43599.2022.9773516 · Cited by 9
Losses estimation and modelling in active magnetic bearings
Romanenko, A., Smirnov, A., Jastrzębski, R. P., & Pyrhönen, O. (2014) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2014.6910753 · Cited by 9
“The analytical calculation resulted in 0.9159 W of losses of which 0.4795 were estimated in stator with GSE and 0.4365 were estimated in lamination.”
MethodInfluentialMatsumori, H., Shimizu, T., Takano, K., & Ishii, H. (2017) · Electrical Engineering in Japan · doi:10.1002/eej.23053 · Cited by 9
An Improved Core-Loss Calculation Method With Variable Coefficients Based on Equivalent Frequency
Jia, W., Xiao, L., Zhu, D., & Wei, J. (2018) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2018.2845700 · Cited by 9
Improvement of Steinmetz’s Parameters Fitting Formula for Ferrite Soft Magnetic Materials
Zhou, T.-W., Zhou, G.-Y., Ombach, G., Gong, X., Wang, Y., & Shen, J. (2018) · IEEE Student Conference on Electric Machines and Systems (SCEMS) · doi:10.1109/scems.2018.8624798 · Cited by 9
Multi-objective Pareto and GAs nonlinear optimization approach for flyback transformer
Barg, S., & Bertilsson, K. (2019) · Electrical Engineering · doi:10.1007/s00202-019-00836-3 · Cited by 10
Core Losses of Nanocrystalline Materials Under DC Bias Conditions
Mauger, M. J., Zheng, X., Kandula, P., & Divan, D. M. (2020) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec39645.2020.9124079 · Cited by 9
“The core losses measured experimentally are also compared to the expected losses from the Steinmetz equation, , and the improved generalized Steinmetz equation (iGSE), , under triangular excitation [13], using the Steinmetz coefficients determined experimentally for the same material in [14].”
MethodRanjram, M. K., & Perreault, D. J. (2020) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel49091.2020.9265752 · Cited by 9
“The core loss density associated with a square wave voltage excitation can be computed via the improved General Steinmetz Equation (iGSE) [23] resulting in the following expression Where V is equal to V o for the 1p and 2p configurations, and 2 V o in the 1pV and 2pV configurations, and A c is the…”
BackgroundMethodAt what frequencies should air-core magnetics be used?
Solomentsev, M., & Hanson, A. J. (2022) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43599.2022.9773714 · Cited by 9
Zero-ventilated self-cooled induction heating device: Topology and component engineering
Paul, A. K. (2022) · Power Electronic Devices and Components · doi:10.1016/j.pedc.2022.100013 · Cited by 9
Estimating switching loss and core loss in dual active bridge DC-DC converters
Zhang, K., Shan, Z., & Jatskevich, J. (2015) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2015.7236501 · Cited by 9
“Commonly, core losses may be expressed as [8], [10] β α B kf Pv ˆ = , (16) where B̂ is the peak of a sinusoidal excitation with frequency f ; Pv is the time-average power loss per unit volume; and k, and are material parameters found by curve fitting [9].”
BackgroundMethodAnalysis, Measurement and Estimation of the Core Losses in Electrical Machines
Tekgün, B. (2016) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 9
Foo, B. X., Stein, A. L. F., & Sullivan, C. R. (2017) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2017.8013318 · Cited by 9
“However, since the magnetizing current and hence flux density in flyback converters are non-sinusoidal, the improved Generalized Steinmetz Equation (iGSE) was our initial choice [18].”
BackgroundSelf-citationAn optimization approach for high-efficiency high-power-density boost converters
Zhang, C., & Perreault, D. J. (2018) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2018.8460066 · Cited by 9
Shima, Y., Yamazaki, T., Foggiatto, A. L., Mitsumata, C., & Kotsugi, M. (2025) · Journal of Applied Physics · doi:10.1063/5.0237895 · Cited by 8
Kandeel, Y., & Duffy, M. C. (2019) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2019.8721776 · Cited by 8
“Hysteresis loss is calculated per unit volume using iGSE (improved Generalized Steinmetz Equation) [24] which considers time-varying flux density.”
MethodIsolated Multi-port DC-DC Converter-Based on Bifurcate MMC Structure
Xu, Y., Wang, K., Lin, J. T., Deng, Y., Lü, Y., & Yang, Y. B. (2019) · Asia-Pacific Power and Energy Engineering Conference (APPEEC) · doi:10.1109/appeec45492.2019.8994701 · Cited by 8
“However, when connecting three or more different dc terminals, the former mentioned configurations require more converters or multi-winding ac transformers, which is more complex and expensive[13]-[15].”
BackgroundLoss estimation and design of dc-dc converters using physics- and data-based component models
Reese, S., Sauter, B., Khandelwal, S., Kamalapur, A., Byrd, T., Haddon, J., & Maksimović, D. (2023) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43580.2023.10131523 · Cited by 8
“Furthermore, in the improved model, inductor core loss P Lc is estimated using the improved generalized Steinmetz equation (IGSE) [13].”
MethodLi, J., Deleu, E., Lee, W., Li, H., Chen, M., & Wang, S. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509194 · Cited by 8
Sauter, B., Reese, S., Sinha, S., Haddon, J., Byrd, T., & Maksimović, D. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509368 · Cited by 10
“This results in significant improvement in core loss predictions for non-sinusoidal excitations [9], but still leaves significant room for improvement.”
BackgroundMethodInfluentialA Hybrid Data-Driven Approach in Magnetic Core Loss Modeling for Power Electronics Applications
Solimene, L., Ragusa, C. S., Giuffrida, A., Lombardo, N., Marmello, F., Morra, S., & Pasquale, M. (2024) · IEEE Mediterranean Electrotechnical Conference (MELECON) · doi:10.1109/melecon56669.2024.10608787 · Cited by 8
Chen, L.-C., Bagci, F. S., & Kim, K. A. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3438116 · Cited by 8
“However,theflybackconverterhasdrawbacks,suchasthe coupledinductorthatcauseshighpowerlossduetoleakagein-ductance [16], [17] relative to direct dc–dc converter topologies [18], [19].”
BackgroundDesign and Implementation of 3 kW All-SiC Current Source Inverter
Riegler, B., & Hartmann, M. (2025) · Electronics · doi:10.3390/electronics14030522 · Cited by 8
Queiroz, S. S., & Costa, L. F. (2025) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48143.2025.10977183 · Cited by 9
“The MFT core loss is estimated using the improved generalized Steinmetz equation (iGSE) [22].”
Imaoka, J., Ishikura, Y., Ito, K., Aoki, T., Noah, M., & Yamamoto, M. (2019) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2019-ecceasia42246.2019.8797162 · Cited by 8
Control and Loss Analysis of a Solid State Transformer Based DC Extreme Fast Charger
Jean-Pierre, G., Beheshtaein, S., Altın, N., & Nasiri, A. (2021) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec51675.2021.9490062 · Cited by 8
“A loss prediction model for non-sinusoidal signals was introduced in [12] based on Steinmetz variables to formulate the core loss for ferrite core materials.”
MethodRecursive inductor core loss estimation method for arbitrary flux density waveforms
Durna, E. (2021) · Journal of Power Electronics · doi:10.1007/s43236-021-00312-x · Cited by 8
“In this paper, a generic solution for the core loss estimation of arbitrary flux waveforms by making use of factory provided parameters is proposed by modifying the iGSE algorithm [17].”
BackgroundMethodInfluentialTayyara, O., Al‐Zareer, M., Silva, C. M. D., Fu, Y., Mastali, M., & Amon, C. H. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3167925 · Cited by 8
“[24] modified the Steinmetz parameters; however, due to the material and highly nonlinear behavior of the B-H curves for ferrite, this approach can yield erroneous results [25].”
ResultAnalysis and Design of a Multiport Resonant DC-Transformer for Solid-State Transformer Applications
Pereira, T., Wei, Y., Mantooth, H. A., & Liserre, M. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9948144 · Cited by 8
“For the core losses, the improved generalized Steinmetz equation (iGSE) [10] is used, cf.”
MethodLoss Reduction at Partial Loads of Multi-Level DAB Converters Using Adjusted Switching Patterns
Khanzadeh, B., Thiringer, T., & Serdyuk, Y. V. (2023) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2023.3290573 · Cited by 8
Artificial Neural Network Based Thermal Model for a Three-Phase Medium Frequency Transformer
Molinero, D., Santamargarita, D., Bueno, E. J., Marrón-Romera, M., & Vasić, M. (2023) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie51358.2023.10227917 · Cited by 8
Performance analysis of an analytical calculation tool for dual-active-bridge converters
van Hoek, H., Jacobs, K., & Doncker, R. W. D. (2015) · IEEE International Conference on Power Electronics and Drive Systems (PEDS) · doi:10.1109/peds.2015.7203493 · Cited by 8
“The core losses are calculated with the Improved Generalized Steinmetz Equation (IGSE) [11].”
MethodEffect of saturation on iron loss in PMSM
Ding, X., Guo, H. H., Du, M., Li, B., Liu, G., & Zhao, L. (2014) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2014.7014071 · Cited by 8
Pulse transformer design for magnet powering in particle accelerators
Aguglia, D. (2013) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2013.6631888 · Cited by 8
“Iron losses are computed using the improved Generalized Steinmetz Equation (iGSE) [5] which considers non-sinusoidal magnetic flux [6].”
Method2.5kV, 200kW bi-directional isolated DC/DC converter for medium-voltage applications
Matsuoka, Y., Wãda, K., Nakahara, M., Takao, K., Sung, K., Ohashi, H., & Nishizawa, S. (2014) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2014.6869671 · Cited by 9
Multi-objective design and optimization of inductors: A generalized software-driven approach
Wang, X., Zeng, H., Gunasekaran, D., & Peng, F. Z. (2016) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2016.7556750 · Cited by 8
Multi magnetic material laminated cores: Concept and modelling
Saha, S., Fernando, N., & Meegahapola, L. G. (2017) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems.2017.8056247 · Cited by 8
“The Steinmetz equation used for estimating the hysteresis loss is given by [18]:”
MethodSPICE simulation of ferrite core losses and hot spot temperature estimation
Ben‐Yaakov, S. (2017) · IEEE International Conference on Electronics, Circuits and Systems (ICECS) · doi:10.1109/icecs.2017.8292005 · Cited by 8
“A number of methods have been suggested to overcome the deficiencies of the basic SE ferrite core estimation [2-19].”
MethodGe, T., Carpenter, B., & Ngo, K. D. T. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2891404 · Cited by 8
“The iGSE method in [28] could solve an arbitrary waveform by using the transient dB/dt and steady-state Bm .”
MethodComparative Core Loss Calculation Methods for Magnetic Materials under Harmonics Effect
Hein, H., Yue, S., & Li, Y. (2019) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/486/1/012019 · Cited by 8
Ahmed, D., & Wang, L. (2019) · IET Power Electronics · doi:10.1049/iet-pel.2019.0316 · Cited by 8
Lazarević, V. Ž., Vasić, M., Boere, E., Eltze, J., & Cobos, J. A. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.2975553 · Cited by 8
“2) The losses in the filter inductors (calculated as proposed in [36] and [37], and capacitors (applying the datasheet esr or tan(δ) parameters).”
MethodApplication of Cycle Skipping Modulation in Buck–Boost Photovoltaic Microconverters
Maheri, H. M., Vinnikov, D., Chub, A., Sidorov, V. E., & Galkin, I. (2022) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2022.3163083 · Cited by 8
A High-Power, High-Frequency Matrix Core Transformer Design for Medium Voltage Dual Active Bridge
Zhao, Z., Wu, Y., Diao, F. M., Lin, N., Du, X., & Zhao, Y. (2022) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec43599.2022.9773400 · Cited by 8
“The topology of typical DAB is shown in Fig.”
InfluentialMulti-Objective Optimization of Bi-directional On-Board Chargers Based on 650V GaN Power Transistors
Bay, O., Hosseinabadi, F., Chakraborty, S., Baghdadi, M. E., & Hegazy, O. (2022) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon49645.2022.9968522 · Cited by 10
“Core loss density caused by triangular or trapezoidal magnetic excitation can be calculated by using the improved Generalized Steinmetz Equation (iGSE) [16] as follows”
MethodEffect of the number magnet-segments on the output torque and the iron losses of a SMPM
Mansouri, A., & Trabelsi, H. (2013) · International Multi-Conference on Systems, Signals & Devices (SSD) · doi:10.1109/ssd.2013.6564071 · Cited by 8
“Historically, one of the first iron loss models is the Steinmetz model [9].”
MethodA novel hysteresis loss calculation method of filter inductor in PWM inverters
Ma, J., Liu, H., Ma, H., & Bai, Z. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6699150 · Cited by 8
Volume Optimization in Si IGBT based Dual-Active-Bridge Converters
Beiranvand, H., Rokrok, E., & Liserre, M. (2019) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc.2019.8697785 · Cited by 8
“Improved generalized Steinmetz equation (IGSE) can be employed to approximate N87 ferrite core losses [20].”
MethodIn-situ Direct Magnetic Loss Measurement in a DC-DC Converter
Moon, J. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8913211 · Cited by 8
“The most conventional approach is through the Steinmetz equation (or one of its many variations as in [2] and [3]).”
MethodTopologies for high-voltage low-power integrated DC-DC converter
Foray, E., Allard, B., Martín, C., & Frattini, G. (2019) · European Conference on Power Electronics and Applications · doi:10.23919/epe.2019.8914817 · Cited by 8
“Using iGSE [9], value of core losses where computed for this material, and results concord with efficiency initial specification (>85%).”
ResultTowards Lightweight Magnetic Components for Converters with Wide-bandgap Devices
Calderon-Lopez, G., Todd, R., Forsyth, A. J., Wang, J., Wang, W., Yuan, X., Aldhaher, S., Kwan, C., Yates, D. C., & Mitcheson, P. D. (2020) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc-ecceasia48364.2020.9367822 · Cited by 8
Ruszczyk, A., Sokalski, K., & Szczygłowski, J. (2013) · arXiv (Cornell University) · doi:10.48550/arxiv.1309.0022 · Cited by 8
Single-phase vs. Three-phase High Power High Frequency Transformers
Xue, J. (2010) · VTechWorks (Virginia Tech) · Cited by 8
Optimization of GaN-based Series-Parallel Multilevel Three-Phase Inverter for Aircraft applications
Sathler, H. H. (2021) · theses.fr (ABES) · doi:10.70675/eb685a68z9388z4ec1zbc18z169567d6236f · Cited by 17
Influence of Phase-Shifted Square Wave Modulation on Medium Frequency Transformer in a MMC Based SST
Agarwal, R., Martin, S., & Li, H. (2020) · IEEE Access · doi:10.1109/access.2020.3042935 · Cited by 7
“Therefore Improved General Steimmetz Equation (iGSE) [24] is used which is suitable for non-sinusoidal voltages.”
MethodZhang, L., McKeague, T., Cui, B., Rasekh, N., Wang, J., Liu, S., & Martínez, A. G. (2024) · Energy Conversion Congress and Expo Europe (ECCE Europe) · doi:10.1109/ecceeurope62508.2024.10751860 · Cited by 7
“They are typically known to be the least efficient component that have a significant impact on system performance and efficiency in the size, weight and power loss factor [1][2].”
Improving Steinmetz Parameters for Iron Loss Characterization with a Magnetic Measurement Kit
Shen, X.-B., Wouters, H., & Martinez, W. (2023) · EPE · doi:10.23919/epe23ecceeurope58414.2023.10264477 · Cited by 4
Jiang, J., Li, Z., Zhao, E., Li, P., Qu, K., & Yang, N. (2024) · International Journal of Circuit Theory and Applications · doi:10.1002/cta.3940 · Cited by 7
Sachs, C., Allgeier, J., Stamer, F., & Neuburger, M. (2025) · IEEE Access · doi:10.1109/access.2025.3618927 · Cited by 7
“A method to correct this, the improved GSE model, or iGSE, is presented by Venkatacha-lam et al. [84].”
Photovoltaic inverter with high efficiency over a wide operation area - a practical approach
Preckwinkel, H., Krishna, D. V., Fröhleke, N., & Böcker, J. (2011) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2011.6119432 · Cited by 7
“(core material: laminated grainoriented iron) - The losses were extracted by separating out the minor and major loops [13].”
BackgroundMethodComparative analysis of inductor concepts for high peak load low duty cycle operation
Leibl, M., & Kolar, J. W. (2014) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2014.6869694 · Cited by 7
“The improved generalized Steinmetz equation (iGSE) [15] extends the OSE to allow loss calculation for non sinusoidal flux density waveforms.”
Highly efficient and reliable DC-DC converter for smart transformer
Costa, L. F., Buticchi, G., & Liserre, M. (2017) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2017.7930691 · Cited by 7
“For the core losses, the Steinmetz equation due to the almost pure sinusoidal current waveforms [24] is used.”
MethodHybrid, Multi-Megawatt HVDC Transformer Topology Comparison for Future Offshore Wind Farms
Smailes, M., Ng, C., Mckeever, P., Shek, J. K. H., Θεοτοκάτος, Γ., & Abusara, M. A. (2017) · Energies · doi:10.3390/en10070851 · Cited by 7
“In recent years, the accuracy of this method has greatly improved, particularly after the introduction of the improved General Steinmetz Equation (iGSE) in 2003 [26].”
BackgroundMethodExperimental Verification on Thermal Modeling of Medium Frequency Transformers
Tian, H., Wei, Z., Thevar, M. P., Vaisambhayana, S., Tripathi, A., & Kjær, P. C. (2018) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2018.8591130 · Cited by 7
Beddingfield, R., Samanta, S., Nations, M., Wong, I., Ohodnicki, P. R., & Bhattacharya, S. (2020) · IEEE Journal of Emerging and Selected Topics in Industrial Electronics · doi:10.1109/jestie.2020.2999589 · Cited by 7
Multi-Application Multi-Objective Optimization Algorithm for DC-DC Converter Topology Choice
Fronczek, C., Thönnessen, A., & Doncker, R. W. D. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9947573 · Cited by 7
“The former is based on the improved Generalized Steinmetz Equation [8].”
BackgroundMethodAutomation of High-Frequency Magnetic Core Loss Data Collection
Anderson, J. R., & Ranjram, M. K. (2023) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel52896.2023.10221076 · Cited by 7
Bidirectional DC-DC Converter Supplying Pulsed Current for Solid Oxide Fuel-Cell
Iurich, M., Saafan, A. A., Fan, B., Dong, D., Burgos, R. P., Brown, C. C., Ghezel‐Ayagh, H., & Petrella, R. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362172 · Cited by 7
“…for these kind of applications have been developed throughout the years, such as the Modified Steinmetz Equation (MSE) [12], the Generalized Steinmetz Equation (GSE) [13], the Improved Generalized Steinmetz Equation (iGSE) [14], the Improved-Improved Generalized Steinmetz Equation (i 2 GSE) [15].”
MethodCost-Effective Piggyback Forward dc-dc Converter
Matiushkin, O., Husev, O. O., Afshari, H., Vinnikov, D., & Strzelecki, R. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509355 · Cited by 7
Metadata
- Authors
- Venkatachalam, K., Sullivan, C. R., Abdallah, T., & Tacca, H.
- Affiliations
- Dartmouth College (US)
- Universidad de Buenos Aires (AR)
- Venue
- 2002 IEEE Workshop on Computers in Power Electronics, 2002. Proceedings.
- Publisher
- IEEE
- Published
- 2003-06-26
- Pages
- 36-41
- ISSN
- 2151-0997 (ISSN-L)
- OpenAlex
- W2109185194
- Cited by
- 1,145
- References
- 23
- Citations by year
- 2026: 49 · 2025: 76 · 2024: 105 · 2023: 82 · 2022: 99 · 2021: 85 · 2020: 104 · 2019: 86 · 2018: 66 · 2017: 67 · 2016: 57 · 2015: 45 · 2014: 47 · 2013: 40 · 2012: 33
- FWCI
- 5.50
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE ... Workshop on Control and Modeling for Power Electronics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Magnetic Properties and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Magnetic Properties and Synthesis of Ferrites
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Keywords
- non-sinusoidal waveforms, hysteresis loss, recursive algorithm, magnetic materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.