Parasitic power harvesting in shoes
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
As the power requirements for microelectronics continue decreasing, environmental energy sources can begin to replace batteries in certain wearable subsystems. In this spirit, this paper examines three different devices that can be built into a shoe, (where excess energy is readily harvested) and used for generating electrical power "parasitically" while walking. Two of these are piezoelectric in nature: a unimorph strip made from piezoceramic composite material and a stave made from a multilayer laminate of PVDF foil. The third is a shoe-mounted rotary magnetic generator. Test results are given for these systems, their relative merits and compromises are discussed, and suggestions are proposed for improvements and potential applications in wearable systems. As a self-powered application example, a system had been built around the piezoelectric shoes that periodically broadcasts a digital RFID as the bearer walks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The active badge location system
Want, R., Hopper, A., Falcão, V., & Gibbons, J. (1992) · ACM Transactions on Information Systems · doi:10.1145/128756.128759 · Cited by 3,767
Human-powered wearable computing
Starner, T. (1996) · IBM Systems Journal · doi:10.1147/sj.353.0618 · Cited by 876 · cited 1×
“In previous studies [5], it has been calculated that up to 67 Watts of power are available from heel strikes during a brisk walk (68 kg person, 2 steps/sec, heel moving 5 cm).”
MethodSmart fabric, or "wearable clothing"
Post, E. R., & Orth, M. (2002) · Digest of Papers. First International Symposium on Wearable Computers · doi:10.1109/iswc.1997.629937 · Cited by 180
Implantable physiological power supply with PVDF film
Häsler, E., Stein, L., & Harbauer, G. (1984) · Ferroelectrics · doi:10.1080/00150198408017528 · Cited by 144
A demonstration of useful electric energy generation from piezoceramics in a shoe
Shenck, N. S. (1999) · Cited by 60
Intrabody buses for data and power
Post, E. R., Reynolds, M., Gray, M., Paradiso, J. A., & Gershenfeld, N. (2002) · International Symposium on Wearable Computers · doi:10.1109/iswc.1997.629919 · Cited by 52
Self-citationCompact portable electric power sources
Lab., T. (. S. O. R. N., Fry, D. N., USDOE, W., Holcomb, D., Munro, J., Oakes, L., & Matson, M. (1997) · doi:10.2172/663584 · Cited by 23
Prospector IX: Human Powered Systems Technologies
Rose, M. F. (1998) · doi:10.21236/ada344414 · Cited by 3
Cited by
System architecture directions for networked sensors
Hill, J., Szewczyk, R., Woo, A., Hollar, S., Culler, D., & Pister, K. (2000) · ACM SIGPLAN Notices · doi:10.1145/356989.356998 · Cited by 3,084
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
“PVDF shoe insole (after Kymiss et al [44]).”
MethodA review of power harvesting using piezoelectric materials (2003–2006)
Anton, S. R., & Sodano, H. A. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/3/r01 · Cited by 2,652
Energy Harvesting Sensor Nodes: Survey and Implications
Sudevalayam, S., & Kulkarni, P. (2011) · IEEE Communications Surveys & Tutorials · doi:10.1109/surv.2011.060710.00094 · Cited by 1,981
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888
Power management in energy harvesting sensor networks
Kansal, A., Hsu, J., Zahedi, S., & Srivastava, M. B. (2007) · ACM Transactions on Embedded Computing Systems · doi:10.1145/1274858.1274870 · Cited by 1,533
Direct-Write Piezoelectric Polymeric Nanogenerator with High Energy Conversion Efficiency
Chang, C., Tran, V. H., Wang, J., Fuh, Y.-K., & Lin, L. (2010) · Nano Letters · doi:10.1021/nl9040719 · Cited by 1,379
A Review of Power Harvesting from Vibration Using Piezoelectric Materials
Sodano, H. A., Inman, D. J., & Park, G. (2004) · The Shock and Vibration Digest · doi:10.1177/0583102404043275 · Cited by 1,361
The cougar approach to in-network query processing in sensor networks
Yao, Y., & Gehrke, J. (2002) · ACM SIGMOD Record · doi:10.1145/601858.601861 · Cited by 1,328
Piezoelectric and ferroelectric materials and structures for energy harvesting applications
Bowen, C. R., Kim, H. A., Weaver, P. M., & Dunn, S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42454e · Cited by 1,223
Adaptive piezoelectric energy harvesting circuit for wireless remote power supply
Ottman, G. K., Hofmann, H. F., Bhatt, A. C., & Lesieutre, G. A. (2002) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.802194 · Cited by 1,206
A review of piezoelectric energy harvesting based on vibration
Kim, H. S., Kim, J.-H., & Kim, J. (2011) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-011-0151-3 · Cited by 1,121
Energy scavenging with shoe-mounted piezoelectrics
Shenck, N. S., & Paradiso, J. A. (2001) · IEEE Micro · doi:10.1109/40.928763 · Cited by 1,091
Self-citationA comprehensive review on vibration energy harvesting: Modelling and realization
Wei, C., & Jing, X. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.073 · Cited by 952
Safaei, M., Sodano, H. A., & Anton, S. R. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab36e4 · Cited by 874
“One of the early works on wearable energy harvesting devices was presented by Paradiso’s research group at MIT Media Laboratories in 1998 [377, 378], in which piezoelectrics were integrated into shoes.”
BackgroundA Survey of Wearable Devices and Challenges
Seneviratne, S., Hu, Y., Nguyen, T., Lan, G., Khalifa, S., Thilakarathna, K., Hassan, M., & Seneviratne, A. (2017) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2017.2731979 · Cited by 821
MEMS power generator with transverse mode thin film PZT
Jeon, Y. B., Sood, R., Jeong, J.-H., & Kim, S.-G. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.032 · Cited by 795
Design considerations for solar energy harvesting wireless embedded systems
Raghunathan, V., Kansal, A., Hsu, J., Friedman, J., & Srivastava, M. (2005) · IPSN 2005. Fourth International Symposium on Information Processing in Sensor Networks, 2005. · doi:10.1109/ipsn.2005.1440973 · Cited by 791
Estimation of Electric Charge Output for Piezoelectric Energy Harvesting
Sodano, H. A., Park, G., & Inman, D. J. (2004) · Strain · doi:10.1111/j.1475-1305.2004.00120.x · Cited by 750
Ottman, G. K., Hofmann, H. F., & Lesieutre, G. A. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.809379 · Cited by 672
Kinetic Energy Harvesting Using Piezoelectric and Electromagnetic Technologies—State of the Art
Khaligh, A., Zeng, P., & Zheng, C. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2024652 · Cited by 669
Comparison of Piezoelectric Energy Harvesting Devices for Recharging Batteries
Sodano, H. A., Inman, D. J., & Park, G. (2005) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x05056681 · Cited by 663
Wireless sensor networks: applications and challenges of ubiquitous sensing
Puccinelli, D., & Haenggi, M. (2005) · IEEE Circuits and Systems Magazine · doi:10.1109/mcas.2005.1507522 · Cited by 638
Electromagnetic generator for harvesting energy from human motion
Saha, C. R., O’Donnell, T., Wang, N., & McCloskey, P. (2008) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2008.03.008 · Cited by 608
Review of wearable thermoelectric energy harvesting: From body temperature to electronic systems
Nozariasbmarz, A., Collins, H., Dsouza, K., Polash, M. H., Hosseini, M., Hyland, M., Liu, J., Malhotra, A., Ortiz, F. M., Mohaddes, F., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114069 · Cited by 588
Advances in Piezoelectric Polymer Composites for Energy Harvesting Applications: A Systematic Review
Mishra, S., Unnikrishnan, L., Nayak, S. K., & Mohanty, S. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800463 · Cited by 556
A survey of energy harvesting sources for embedded systems
Chalasani, S., & Conrad, J. M. (2008) · IEEE SoutheastCon 2008 · doi:10.1109/secon.2008.4494336 · Cited by 482
Energy Harvesting for Structural Health Monitoring Sensor Networks
Park, G., Rosing, T., Todd, M. D., Farrar, C. R., & Hodgkiss, W. (2008) · Journal of Infrastructure Systems · doi:10.1061/(asce)1076-0342(2008)14:1(64 · Cited by 434
Introduction to carbon nanotube and nanofiber smart materials
Kang, I., Heung, Y. Y., Kim, J. H., Lee, J. W., Gollapudi, R., Subramaniam, S., Narasimhadevara, S., Hurd, D., Kirikera, G. R., Shanov, V., et al. (2006) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2006.02.011 · Cited by 409
Metallic MXenes: A new family of materials for flexible triboelectric nanogenerators
Dong, Y., Mallineni, S. S. K., Maleski, K., Behlow, H., Mochalin, V. N., Rao, A. M., Gogotsi, Y., & Podila, R. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.11.044 · Cited by 395
Energy Harvesting from Highly Unsteady Fluid Flows using Piezoelectric Materials
Akaydin, H. D., Elvin, N., & Andreopoulos, Y. (2010) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x10366317 · Cited by 385
Nanoscale flexoelectric energy harvesting
Deng, Q., Kammoun, M., Erturk, A., & Sharma, P. (2014) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2014.05.018 · Cited by 385
Dielectric Elastomer Generators: How Much Energy Can Be Converted?
Koh, S. J. A., Keplinger, C., Li, T., Bauer, S., & Suo, Z. (2011) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2010.2089635 · Cited by 359
Energy harvesting from a backpack instrumented with piezoelectric shoulder straps
Granstrom, J., Feenstra, J., Sodano, H. A., & Farinholt, K. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/5/036 · Cited by 339
Comparison of energy harvesting systems for wireless sensor networks
Gilbert, J. M., & Balouchi, F. (2008) · International Journal of Automation and Computing · doi:10.1007/s11633-008-0334-2 · Cited by 337
Electroactive Polymer-Based Devices for e-Textiles in Biomedicine
Carpi, F., & DeRossi, D. (2005) · IEEE Transactions on Information Technology in Biomedicine · doi:10.1109/titb.2005.854514 · Cited by 328
Energy harvesting for the implantable biomedical devices: issues and challenges
Hannan, M. A., Mutashar, S., Samad, S. A., & Hussain, A. (2014) · BioMedical Engineering OnLine · doi:10.1186/1475-925x-13-79 · Cited by 322
Sensitivity Analysis and Energy Harvesting for a Self-Powered Piezoelectric Sensor
Ng, T. H., & Liao, W. H. (2005) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x05053151 · Cited by 319
Shepelin, N. A., Glushenkov, A. M., Lussini, V. C., Fox, P. J., Dicinoski, G. W., Shapter, J. G., & Ellis, A. V. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03006e · Cited by 317
Damping as a result of piezoelectric energy harvesting
Lesieutre, G. A., Ottman, G. K., & Hofmann, H. F. (2004) · Journal of Sound and Vibration · doi:10.1016/s0022-460x(03)00210-4 · Cited by 300
Zhu, M., Yi, Z., Yang, B., & Lee, C. (2021) · Nano Today · doi:10.1016/j.nantod.2020.101016 · Cited by 295
On Low-Frequency Electric Power Generation With PZT Ceramics
Platt, S. R., Farritor, S., & Haider, H. (2005) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2005.844704 · Cited by 294
A Shoe-Embedded Piezoelectric Energy Harvester for Wearable Sensors
Zhao, J., & You, Z. (2014) · Sensors · doi:10.3390/s140712497 · Cited by 292
Optimum Piezoelectric Bending Beam Structures for Energy Harvesting using Shoe Inserts
Mateu, L., & Moll, F. (2005) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x05055280 · Cited by 286
Energy harvesting through a backpack employing a mechanically amplified piezoelectric stack
Feenstra, J., Granstrom, J., & Sodano, H. (2008) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2007.09.015 · Cited by 281
Generation and Storage of Electricity from Power Harvesting Devices
Sodano, H. A., Inman, D. J., & Park, G. (2005) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x05047210 · Cited by 269
Energy Harvesting For Wearable Devices: A Review
Chong, Y.-W., Ismail, W., Ko, K., & Lee, C.-Y. (2019) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2925638 · Cited by 263
A piezoelectric fibre composite based energy harvesting device for potential wearable applications
Swallow, L. M., Luo, J. K., Siores, E., Patel, I., & Dodds, D. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/2/025017 · Cited by 208
Energy scavenging sources for biomedical sensors
Romero, E., Warrington, R. O., & Neuman, M. R. (2009) · Physiological Measurement · doi:10.1088/0967-3334/30/9/r01 · Cited by 165
Energy harvesting for human wearable and implantable bio-sensors
Mitcheson, P. D. (2010) · 2010 Annual International Conference of the IEEE Engineering in Medicine and Biology · doi:10.1109/iembs.2010.5627952 · Cited by 132
Survey of energy scavenging for wearable and implantable devices
Ghomian, T., & Mehraeen, S. (2019) · Energy · doi:10.1016/j.energy.2019.04.088 · Cited by 126
Wireless technologies for implantable devices
Nelson, B. D., Karipott, S. S., Wang, Y., & Ong, K. G. (2020) · Sensors · doi:10.3390/s20164604 · Cited by 125
“There are many wearable piezoelectric energy harvesters that use forces that occur during ambulation [77], and some implants use a similar approach at joint interfaces [74].”
BackgroundDesign, simulation and experiment of a novel high efficiency energy harvesting paver
Liu, M., Lin, R., Zhou, S., Yu, Y., Ishida, A., McGrath, M., Kennedy, B., Hajj, M., & Zuo, L. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.123 · Cited by 118
Evaluation of motions and actuation methods for biomechanical energy harvesting
Niu, P., Chapman, P., Riemer, R., & Zhang, X. (2005) · 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551) · doi:10.1109/pesc.2004.1355442 · Cited by 117
A review of walking energy harvesting using piezoelectric materials
Nia, E. M., Zawawi, N. A. W. A., & Singh, B. S. M. (2017) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/291/1/012026 · Cited by 97
“3mW [22] A stack of Polyvinylidinefluoride (PVDF) sheets shaped 1.”
BackgroundMethodMovers and shakers: kinetic energy harvesting for the internet of things
Gorlatova, M., Sarik, J., Grebla, G., Cong, M., Kymissis, I., & Zussman, G. (2014) · The 2014 ACM international conference on Measurement and modeling of computer systems · doi:10.1145/2591971.2591986 · Cited by 79
(2014) · doi:10.1109/mesa.2014.6935616 · Cited by 29
Using Piezoelectric Elements as Footsteps Energy Harvester: an Investigation
Kamal, P. N. M., & Buniyamin, N. (2018) · 2018 IEEE 8th International Conference on System Engineering and Technology (ICSET) · doi:10.1109/icsengt.2018.8606372 · Cited by 13
“A common project is to place a piezoelectric element inside the soles of a pair of shoes, and energy will be harvested whenever the wearer of the shoes walks in it [12].”
BackgroundA Piezoelectric Energy Harvester for Wearable Applications
Cao, W., Yu, W., & Huang, W. (2019) · Advances in Intelligent Systems and Computing · doi:10.1007/978-3-319-99695-0_8 · Cited by 3
PIEZOELECTRIC ENERGY HARVESTING USING FOOTSTEPS
Withana, A., Samarakoon, S., Amarasuriya, H., Peiris, B., & Lucas, R. (2023) · Journal of Advances in Engineering · doi:10.64701/joae/345/8722
Metadata
- Authors
- Kymissis, J., Kendall, C., Paradiso, J., & Gershenfeld, N.
- Venue
- Digest of Papers. Second International Symposium on Wearable Computers (Cat. No.98EX215)
- Publisher
- IEEE Comput. Soc
- Published
- 2002-11-27
- Pages
- 132-139
- OpenAlex
- W2538058131
- Cited by
- 621
- References
- 8
- FWCI
- 35.18
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.