A Review of SiC Power Module Packaging Technologies: Challenges, Advances, and Emerging Issues
The DOI matches its Crossref record; 103 of the 109 references it cites were found in a registry or an index.
Abstract
Power module packaging technologies have been experiencing extensive changes as the novel silicon carbide (SiC) power devices with superior performance become commercially available. This article presents an overview of power module packaging technologies in this transition, with an emphasis on the challenges that current standard packaging face, requirements that future power module packaging needs to fulfill, and recent advances on packaging technologies. The standard power module structure, which is a widely used current practice to package SiC devices, is reviewed, and the reasons why novel packaging technologies should be developed are described in this article. The packaging challenges associated with high-speed switching, thermal management, high-temperature operation, and high-voltage isolation are explained in detail. Recent advances on technologies, which try to address the limitations of standard packaging, both in packaging elements and package structure are summarized. The trend toward novel soft-switching power converters gave rise to problems regarding package designs of unconventional module configuration. Potential applications areas, such as aerospace applications, introduce low-temperature challenges to SiC packaging. Key issues in these emerging areas are highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Conventional wire bonding is often unsuitable for WBG devices, which switch rapidly [25-27].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“The constraints arise from three factors: substantial parasitic inductance, restricted vertical heat removal, and reduced reliability under thermomechanical stress-all of which degrade performance and lifetime [25-27,40].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“Conventional wire bonding, originally developed for Si devices, is a bottleneck that limits the attainable switching speed and power density of WBG packages.”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“DSC has been widely implemented in SiC MOSFET high-power modules and is considered essential for extending device lifetime under high thermal loads [26,41-44].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“The use of thermally conductive adhesive films (TCAFs) reduces interfacial thermal resistance.”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
4 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Review of Silicon Carbide Power Devices and Their Applications
She, X., Huang, A. Q., Lucia, O., & Ozpineci, B. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2652401 · Cited by 1,773 · cited 5×
“manufacturing processes need to be improved to make the cost of SiC devices more justifiable [5], [11].”
BackgroundInfluentialHigh-temperature electronics - a role for wide bandgap semiconductors?
Neudeck, P. G., Okojie, R. S., & Chen, L.-Y. (2002) · Proceedings of the IEEE · doi:10.1109/jproc.2002.1021571 · Cited by 1,050
The resonant DC link converter-a new concept in static power conversion
Divan, D. M. (1989) · IEEE Transactions on Industry Applications · doi:10.1109/28.25548 · Cited by 815
Oswald, N., Anthony, P., McNeill, N., & Stark, B. H. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2278919 · Cited by 504
A review of high-temperature electronics technology and applications
Watson, J., & Castro, G. (2015) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-015-3459-4 · Cited by 378
A Review on Die Attach Materials for SiC-Based High-Temperature Power Devices
Chin, H. S., Cheong, K. Y., & Ismail, A. B. (2010) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-010-9365-5 · Cited by 337
SiC power devices — Present status, applications and future perspective
Ostling, M., Ghandi, R., & Zetterling, C.-M. (2011) · 2011 IEEE 23rd International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2011.5890778 · Cited by 332
Resonant snubbers with auxiliary switches
McMurray, W. (1993) · IEEE Transactions on Industry Applications · doi:10.1109/28.216544 · Cited by 313
A Review of SiC Power Module Packaging: Layout, Material System and Integration
Huazhong University of Science and Technology, & Chen, C. (2017) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2017.00017 · Cited by 310
Chen, Z., Yao, Y., Boroyevich, D., Ngo, K. D. T., Mattavelli, P., & Rajashekara, K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2283245 · Cited by 277
Research works printed but not linked: 21
- 2014, Design Considerations for High Power Module (HPM)
- sandwell, 2018, Electrically Induced Bearing Damage (EIBD) Aka Shaft Currents Aka Electrical Discharge Machining (EDM)
- guth, 2010, New assembly and interconnects beyond sintering methods, Proc Power Convers Intell Motion, 232
- choi, 2017, Overview of Silicon power Devices Fairchild Semiconductors
- 2019, Electric Power Monthly With Data for November 2018
- 2012, Unleashing Growth in Wide Bandgap The Upcoming Disruptions in Power Electronics GSA Semiconductor Leaders Forum Taiwan
- graotxapartegi, 2018, Status of power electronic industry: Market and technology trends, Proc Appl Power Electron Conf Expo
- schoser, 2015, Highly Reliable Transfer-Molded Power Modules
- johnson, 2007, Electronics packaging for extreme environments, Proc Int Planet Probe Workshop, 1
- 2017, Double Side Cooled Module FF400R07A01E3 S6 Data Sheet
- ostmann, 2016, Evolution and future of embedding technology, Proc Int Microelectron Assem Packag Soc, 1
- 2015, Quadrennial Technology Review 2015 Innovating Clean Energy Technologies in Advanced Manufacturing
- lostetter, 1998, Integrated power modules (IPMs), a novel MCM approach to high power electronics design and packaging, Int J Microcircuits Electron Packag, 21, 274
- 2014, DBA (Direct Bonded Aluminum) Substrate
- 2016, Curamik CERAMIC SUBSTRATES-TECHNICAL DATA SHEET
- 2015, Mitsubishi Electric to Release Sample J1-Series Power Modules
- 2012, Products for Electric and Hybrid Vehicles
- 2015, PCBs—Products and Solutions Schweizer Electronic
- 2016, NCAB group seminars—IMS
- casady, 2013, SiC power devices and modules maturing rapidly, Power Electron Eur, 1, 16
- 2016, Trends and Developments
Cited by
Items 201–300 of 561
Lan, D., Li, G., Zeng, Q. H., Yi, G., Ding, S., Qiao, L., Gao, F., & Li, S. (2026) · Chip · doi:10.1016/j.chip.2025.100188 · Cited by 7
Lee, C., Kao, K., & Huang, Y. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3414829 · Cited by 7
Chen, M., Wang, Y., Fan, L., Ding, Y., & Yin, Y. (2024) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/tdei.2024.3495593 · Cited by 7
Liu, C., & Liu, C. (2025) · Manufacturing Review · doi:10.1051/mfreview/2024024 · Cited by 7
Mu, W., Wang, L., Jin, H., Hu, B., Wang, B., Zhang, J., Wang, L., & Long, T. (2025) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2024.3524492 · Cited by 7
Wide bandgap Materials: Revitalizing Power Electronics with Advances in Power Semiconductor Devices
Sahu, S. K., Chacko, S., Parmar, O., & Rajput, A. S. (2025) · Journal of The Institution of Engineers (India) Series B · doi:10.1007/s40031-025-01205-4 · Cited by 7
A Modified DBC Substrate Improving Thermal Performance for Confined Space Applications
Chowdhury, S., Barua, H., Ozpineci, B., & Rowden, B. L. (2025) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2025.3552980 · Cited by 7
He, S., Liu, X., Pan, Z., Gao, S., Zuo, Y., & Nishikawa, H. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.114048 · Cited by 7
Zhu, L., Ren, J., Huang, F. F., & Huang, M. L. (2025) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2025.131045 · Cited by 7
Zhang, J., Chen, W., Chen, J., Guo, B., Tang, H., Chen, C., Zhang, G., & Fan, J. (2025) · Surfaces and Interfaces · doi:10.1016/j.surfin.2025.107268 · Cited by 7
Cui, R., Yang, X., & Duan, X. (2025) · Precision Engineering · doi:10.1016/j.precisioneng.2025.07.010 · Cited by 7
Wan, H., Antoniou, M., Iosifidis, N., Zhao, S., & Mawby, P. (2022) · IEEE Workshop on Wide Bandgap Power Devices and Applications in Europe (WiPDA Europe) · doi:10.1109/wipdaeurope55971.2022.9936546 · Cited by 7
Prevention of Fraud with the Values of Suport Approach
Yanuar, F., Yuri, J., Chew, M., & Torsten, P. (2022) · Journal International Dakwah and Communication · doi:10.55849/jidc.v2i2.189 · Cited by 7
SiC Power Module Design with a Low-Permittivity Material to Reduce Common-Mode Noise
Choi, S., Choi, J. C., Shin, J.-W., Yonezawa, Y., Imaoka, J., & Yamamoto, M. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509406 · Cited by 7
Jiao, J., Zhao, S., Li, Y., Wei, M., Yan, G., & Liu, X. (2024) · Vacuum · doi:10.1016/j.vacuum.2024.113588 · Cited by 7
Power Module With Low Common-Mode Noise and High Reliability
Choi, S., Choi, J. C., Warnakulasooriya, T., Shin, J.-W., Imaoka, J., & Yamamoto, M. (2024) · IEEE Access · doi:10.1109/access.2024.3420393 · Cited by 7
Design Optimization of RC Snubber Circuit for A SiC Power Module
Che, L., Dong, Y., & Lei, G. (2022) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept56209.2022.9873263 · Cited by 7
SiC Power Module Packaging Using Printed Electronics Materials and Processes
Al-Haidari, R. A., Richmond, D. J., Obeidat, A. S., Alhendi, M., Abbara, E. M., Somarathna, K. U. S., Poliks, M. D., Gowda, A. V., Erlbaum, J., Han, X., et al. (2024) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2024.3453209 · Cited by 6
Rodrigues, A. D., Magnien, J., Brunner, R., & Roshanghias, A. (2024) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2024.3501478 · Cited by 6
Failure evolution analysis of SiC power modules in electric-thermal-mechanical multi-physical fields
Chen, Y., Lan, X., Li, L., Li, X., Zhang, Z., & Xin, G. (2025) · Microelectronics Reliability · doi:10.1016/j.microrel.2025.115751 · Cited by 7
Wang, X., Lian, Z., Lu, D., Li, M., & Ji, H. (2025) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2025.118981 · Cited by 6
Sun, Z., Guo, W., Takahashi, M., Peña-Quintal, A., Agyakwa, P. A., Evans, P., Li, K., Munk‐Nielsen, S., & Jørgensen, A. B. (2025) · Power Electronic Devices and Components · doi:10.1016/j.pedc.2025.100123 · Cited by 6
Strategies to Reduce Transient Liquid Phase Bonding Time for the Die Attach of Power Semiconductors
Sohn, S., Kim, D., Kim, H.-P., & Kang, N. (2020) · Journal of Welding and Joining · doi:10.5781/jwj.2020.38.2.5 · Cited by 6
Compact SiC Power Module With Integrated Power Delivery and Cooling
Muslu, A. M., Smet, V., & Joshi, Y. K. (2022) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2022.3231804 · Cited by 6
Self-citationElectret Based Partial Discharge Mitigation in High Switching Frequency PWM Voltage Systems
Haque, F., & Park, C. (2023) · IEEE Electrical Insulation Conference (EIC) · doi:10.1109/eic55835.2023.10177303 · Cited by 6
Sirat, A. P., Niakan, H., Gafford, J. R., & Parkhideh, B. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362548 · Cited by 6
Switch Cell Design for Novel High-frequency Press-pack SiC FET Modules
Muravleva, E., Canbaz, B., Wang, J., Qu, L., & Hudgins, J. L. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362443 · Cited by 6
Mitigating Partial Discharge at Low Pressures Using Electrets for All-Electric Aircraft
Saha, P. C., Juberi, A. M., Faruqe, O., & Park, C. (2025) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2025.3543758 · Cited by 6
Electret: A Method to Increase Critical Flashover Voltage in Power Dense Applications
Faruqe, O., Haque, F., & Park, C. (2021) · IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) · doi:10.1109/ceidp50766.2021.9705382 · Cited by 6
Evaluating Cu Printed Interconnects “Sinterconnects” versus Wire Bonds for Switching Converters
Hasan, M. N., Polom, T. A., Holzmann, D., Malagò, P., Binder, A., & Roshanghias, A. (2022) · Electronics · doi:10.3390/electronics11091373 · Cited by 6
Heat Spreading and Heat Removal Needs of a Novel Power Electronics Package with Integrated Cooling
Muslu, A. M., Wong, R., Smet, V., & Joshi, Y. K. (2021) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm51669.2021.9503214 · Cited by 6
Self-citationWu, P., Fan, Y., Mei, X., Qian, H., & Wang, L. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3544806 · Cited by 5
Sintered Silver-Based Direct-Cooled IGBTs With High Output Power and Thermal Reliability
Zhang, B., Lu, X., Sun, Y., Wang, Y., & Mei, Y. (2025) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2025.3598012 · Cited by 5
Sochor, P., Huerner, A., Sun, Q., & Elpelt, R. (2023) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2023-ecceasia54778.2023.10213920 · Cited by 5
Zhang, P., Yao, C., Yu, L., He, Y., & Dong, S. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c14057 · Cited by 6
Tang, X., Sima, W., Sun, P., Zun, C., Yuan, T., Yang, M., Shi, Z., Yang, H., & Deng, Q. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c12047 · Cited by 5
Ajiboye, A., Gamwari, A. S., Resalayyan, R., & Khaligh, A. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509456 · Cited by 5
Ultra-low CTE-mismatch of 3C-SiC-on-Si thin films for high temperature MEMS applications
Moll, P., Pfusterschmied, G., Schmid, B., Schwarz, S., Artner, W., & Schmid, U. (2025) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2025.116262 · Cited by 5
Development and Characterization of Epoxy Molding Compound with High Glass Transition Temperature
Zou, Q., Xie, G., Lei, G., Ding, Q., & Zhan, W. (2022) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept56209.2022.9873223 · Cited by 5
Nanoscale Mapping of Sub‐Gap Electroluminescence from Step‐Bunched, Oxidized 4H‐SiC Surfaces
Alyabyeva, N., Ding, J., Sauty, M., Woerle, J., Jousseaume, Y., Ferro, G., McCallum, J. C., Peretti, J., Johnson, B. C., & Rowe, A. C. H. (2022) · physica status solidi (b) · doi:10.1002/pssb.202200356 · Cited by 5
Sprenger, M., Noll, N., Hecht, C., de Greiff, M., Müller, L., & Franke, J. E. (2022) · IEEE Electronics Packaging Technology Conference (EPTC) · doi:10.1109/eptc56328.2022.10013218 · Cited by 5
Hardware-in-the-Loop Implementation of ROMAtrix, a Smart Transformer for Future Power Grids
Ostadrahimi, A., & Bifaretti, S. (2023) · Machines · doi:10.3390/machines11020308 · Cited by 5
Bakri, R., & Margueron, X. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3404619 · Cited by 5
Enhancement of Cu-to-Cu bonding property by residual stress in Cu substrate
Wang, H., Chen, P.-H., Kung, C.-H., Chang, P.-K., Chiu, S., Lin, Y., Wang, C.-M., & Wu, A. T. (2024) · Materials Characterization · doi:10.1016/j.matchar.2024.114107 · Cited by 5
Mitigating Partial Discharge in Power Module Using Functional Capacitive Field Grading Material
Juberi, A. M., Faruqe, O., Saha, P. C., & Park, C. (2024) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec60657.2024.10599065 · Cited by 5
Fukushima, T., & Inoue, M. (2025) · Materials · doi:10.3390/ma18020217 · Cited by 5
Takemasa, T., Chen, C., & Suganuma, K. (2021) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-021-06513-1 · Cited by 5
Surface Flashover Characteristics of Solid Dielectrics in Shipboard Atmospheric Conditions
Faruqe, O., Haque, F., Berdiyev, H., & Park, C. (2021) · IEEE Electric Ship Technologies Symposium (ESTS) · doi:10.1109/ests49166.2021.9512357 · Cited by 5
Mauromicale, G., Sitta, A., Calabretta, M., Oliveri, S. M., & Sequenzia, G. (2021) · Applied Sciences · doi:10.3390/app11188302 · Cited by 5
Hitoshi, Y., Yuki, K., Yuki, K., Nakaoka, T., & Goto, M. (2024) · Transactions of The Japan Institute of Electronics Packaging · doi:10.5104/jiepeng.17.e24-002-1 · Cited by 5
Dreiling, R., Zimmermann, S., Nguyen-Xuan, T., Schreivogel, P., & di Mare, F. (2022) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec53557.2022.9813801 · Cited by 5
Mei, Y., Zhang, L., Zhao, Y., Pei, Y., Ning, P., Li, L., & Zhu, G. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3552131 · Cited by 4
Wang, K., Dai, D., Zhang, C., Dong, M., & Ren, M. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3558960 · Cited by 4
Unlocking different types of basal plane dislocations and its evolution in 4H-SiC
Yang, S., Chen, K., Wang, J., Wei, Y., Sun, L. X., Wang, R., Xie, X., Chen, X., Yang, X., Hu, X., et al. (2025) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2025.10.024 · Cited by 4
Recycling power semiconductor devices
Sun, P., Zeng, Z., Pan, X., Ran, L., Hu, Y., Huang, S., Wang, Y., & Li, J. (2026) · Nature Reviews Electrical Engineering · doi:10.1038/s44287-025-00242-x · Cited by 6
Du, J., Ma, L., Jia, Q., Wang, Y., Zhang, H., & Guo, F. (2026) · Microelectronics Reliability · doi:10.1016/j.microrel.2026.116075 · Cited by 4
Preparation and polishing performance of CIP@Ni-P/ND magnetic composite abrasives
Luo, K., Yan, Q., Lin, J., Zhang, Y., Peng, T., & Pan, J. (2026) · Diamond and Related Materials · doi:10.1016/j.diamond.2026.113532 · Cited by 4
Li, R., Jiang, R., Tang, Q., Yu, J., & Song, D. (2024) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2024.2408341 · Cited by 4
Modeling Thermal Impedance of IGBT Devices Based on Fractional Calculus Techniques
Yang, N., Yang, Z., Huang, Y., Yang, W., Liu, W., & Chen, X. (2024) · Electronics · doi:10.3390/electronics13224423 · Cited by 4
A Review of High Voltage Challenges and Developments of Power Electronics Packaging
Zheng, L., Ji, S., & Yao, X. (2024) · IEEE International Power Modulator Symposium and High-Voltage Workshop (IPMHVC) · doi:10.1109/ipmhvc55105.2024.11002775 · Cited by 4
Electric and Thermal Performance Enhancement of Silicone Gel by Nano-SiO 2 Under DC Stress
Zhang, X. D., Lv, Z., Zhang, C., Peng, J., Wu, K., & Yang, X. (2025) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/tdei.2025.3620777 · Cited by 4
Implementation of TAPIR Switching Cells with Integrated Direct Air-Cooling for SiC Power Devices
Bikinga, W., Alkama, K., Mezrag, B., Guichon, J., & Avenas, Y. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215620 · Cited by 4
Morya, A. K., Yepes, A. G., Doval‐Gandoy, J., & Toliyat, H. A. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9236327 · Cited by 4
Variable Gate Voltage Driving Circuits for Mitigation of Coupling Noise in Silicon Carbide MOSFET
Wu, X., Wang, C., Zaman, H., Zhao, X., & Wu, X. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3061612 · Cited by 4
Investigation on GaN HEMTs Based Three-Phase STATCOM with Hybrid Control Scheme
Ma, C.-T., & Gu, Z.-H. (2021) · Micromachines · doi:10.3390/mi12040464 · Cited by 4
Du, Y., Tang, X., Wang, L., Zhao, Z., Yang, X., Yang, F., & Wu, J. (2021) · IEEE Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia) · doi:10.1109/wipdaasia51810.2021.9656016 · Cited by 4
Recent Studies of Transient Liquid Phase Bonding Technology for Electric Vehicles
Lee, D.-H., Heo, M.-H., & Yoon, J. (2022) · Journal of Welding and Joining · doi:10.5781/jwj.2022.40.3.4 · Cited by 4
Rodrigues, A. D., Weissbach, T., Malik, M. H., Schmidt, W., Gumbiowski, R., Hübler, A. C., Binder, A., & Roshanghias, A. (2022) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-022-08763-z · Cited by 4
A Critical Comparison of the Cuk and the Sheppard–Taylor Converter
Alvarez-Diazcomas, A., Rodríguez‐Reséndiz, J., Carrillo-Serrano, R. V., Estévez-Bén, A. A., & Álvarez-Alvarado, J. M. (2023) · World Electric Vehicle Journal · doi:10.3390/wevj14060148 · Cited by 4
A New Measurement of Online Junction Temperature Based on On-state Resistance
Ye, Z., Zheng, Z., & Li, C. (2023) · IEEE International Electrical and Energy Conference (CIEEC) · doi:10.1109/cieec58067.2023.10166768 · Cited by 4
Wang, X., Yang, Z., Zhang, G., Zhang, J., & Liu, P. (2023) · IEEE Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc51909.2023.00341 · Cited by 4
Janisch, L., Ockel, M., Schlichting, J., Breuer, M., & Franke, J. E. (2023) · International Conference on Control, Mechatronics and Automation (ICCMA) · doi:10.1109/iccma59762.2023.10374891 · Cited by 4
Wang, J., & Liu, P. (2024) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2024.3413723 · Cited by 4
Saha, P. C., Faruqe, O., Juberi, A. M., & Park, C. (2024) · IEEE Electrical Insulation Conference (EIC) · doi:10.1109/eic58847.2024.10579436 · Cited by 4
Bare copper bonding with facilely synthesized Ag nanoparticles decorated Cu microparticles paste
Zhou, W. Y., Deng, W., Ji, Z., Ji, X., Ma, L., Lin, P., & Guo, F. (2024) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-024-13404-8 · Cited by 4
Jia, Q., Zhou, B., Wang, Y., Zhang, H., dan, L., Ma, L., Zou, G., & Guo, F. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.110791 · Cited by 4
Thin-Film Encapsulation Solution for High-Temperature SiC Power Devices
Zhang, R., Liu, Z., Li, K., Li, F., Wu, Y., Wang, Z., Yang, K., & Xin, G. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3549045 · Cited by 4
Cu particle-reinforced Sn58Bi filler for soldering SiC to Cu at a temperature below 200 °C
Zhao, Y., Zhou, Y., Wu, Y., Tao, W., Wu, P., & Wang, G. (2025) · Journal of Materials Science · doi:10.1007/s10853-025-11088-x · Cited by 4
Zhang, T., Wang, L., Zhang, X., Zhang, J., Wang, Y., Yang, F., Pei, Y., & Gan, Y. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3587709 · Cited by 4
Paralleling Silicon Carbide MOSFETs in Power Module for Traction Inverters: a Parametric Study
Sitta, A., Mauromicale, G., Giuffrida, V., Manzitto, A., Papaserio, M., Cavallaro, D., Bazzano, G., Renna, M., Rizzo, S. A., & Calabretta, M. (2021) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime52062.2021.9410856 · Cited by 4
Current Uniformity Optimization of Multi-Chip SiC Module for High-Power Applications
Li, W., Mao, S., Liu, H., Fan, J., & Zeng, K. (2022) · IEEE International Power Electronics and Application Conference and Exposition (PEAC) · doi:10.1109/peac56338.2022.9959680 · Cited by 4
Packaging of SiC Power Module with a Low-Permittivity Material to Reduce Capacitive Coupling
Choi, S., Choi, J. C., Shin, J.-W., Imaoka, J., & Yamamoto, M. (2023) · IEEE CPMT Symposium Japan (ICSJ) · doi:10.1109/icsj59341.2023.10339578 · Cited by 4
Silicon Carbide n-IGBTs: Structure Optimization for Ruggedness Enhancement
Almpanis, I., Antoniou, M., Evans, P. L., Empringham, L., Gammon, P. M., Udrea, F., Mawby, P., & Lophitis, N. (2024) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2024.3354870 · Cited by 4
Li, J., Xu, Y. J., Shang, P., Wang, Y., & Suga, T. (2021) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept52650.2021.9568033 · Cited by 4
Preliminary Design Tool for Power Converters in Electric Aircraft Propulsion Systems
Kugener, J., Pal, A., & Kazula, S. (2024) · elib (German Aerospace Center) · doi:10.25967/610355 · Cited by 4
Nguyen, Q. C. (2021) · theses.fr (ABES) · doi:10.70675/da736545z51dez428eza633zf798b5dcf8cd · Cited by 4
An Efficient Capacitance Extraction Method for Multichip Power Modules for EMI Analysis
Rhee, J., Lee, S., Ha, S., Lee, C., Woo, S., Shin, Y., Kim, H., Kim, J., & Ahn, S. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3605996 · Cited by 3
Chen, H., Yan, H., Liu, C., Shi, S., & Sheng, K. (2025) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2025.3611509 · Cited by 3
Lin, Y. H., Li, M., Dong, L., Liu, Y., Hou, T., Wen, T., & Ding, L. (2025) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/tdei.2025.3621164 · Cited by 3
1000 V, 10 MHz Voltage Multiplier Based on Monolithically Integrated GaN-on-Sapphire Diode Bridge IC
Yang, Z., Yang, X., Gong, H., Cui, H., Zhang, H., Yan, N., Yu, X., Qin, Y., Wang, Y., Wang, X., et al. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3642712 · Cited by 3
Li, W., Chen, W., Jiang, J., Wang, W., Gao, Y., Zhu, F., Fan, X., Zhang, G., & Fan, J. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3609446 · Cited by 3
Abramushkina, E. E., Frikha, M. A., Verbrugge, B., Hegazy, O., & Baghdadi, M. E. (2026) · IEEE Access · doi:10.1109/access.2026.3671183 · Cited by 3
Zhang, J., Yan, X., Li, Z., Ge, Y., Zheng, C., Chen, C., & Fan, J. (2026) · Electrochimica Acta · doi:10.1016/j.electacta.2026.148898 · Cited by 3
Yonezawa, T., & Qianhao, Z. U. O. (2026) · Advanced Engineering Materials · doi:10.1002/adem.202502392 · Cited by 3
Hertline, J., Mayberry, R. W., & McCoy, J. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509282 · Cited by 3
New Ceramic Material Y2‐xVxO3+x – Mechanochemical Synthesis and Some Physicochemical Properties
Piz, M., Filipek, E., Kwiatkowski, K., Dulian, P., Bąk, W., & Wróbel, R. J. (2024) · ChemNanoMat · doi:10.1002/cnma.202400337 · Cited by 3
Fast Correction Method for Thermal Network Models of Multi‐Chip Parallel Power Modules
Luo, Q., Li, Y., Zhao, B., Sun, P., Zhao, Z., Cai, Y., & Li, X. (2025) · IET Power Electronics · doi:10.1049/pel2.70035 · Cited by 3
Design and Implementation of a SiC-Based VRFB Power Conditioning System
Ma, C.-T., & Tian, Y.-H. (2020) · Micromachines · doi:10.3390/mi11121099 · Cited by 3
Huang, S., Liu, Y., & Li, K. (2022) · Soldering and Surface Mount Technology · doi:10.1108/ssmt-12-2021-0066 · Cited by 3
Design of a Novel Double Sided Cooling SiC Power Module Based on Multiple DBC-Stacked
Kang, Y., Ning, P., Hui, X., Fan, T., Li, D. Q., Wang, K., Mei, Y., & Lei, G. (2023) · IEEE International Power Electronics and Application Symposium (PEAS) · doi:10.1109/peas58692.2023.10395598 · Cited by 3
Metadata
- Authors
- Lee, H., Smet, V., & Tummala, R.
- Affiliations
- Georgia Institute of Technology (US)
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2020-03
- Volume
- 8
- Issue
- 1
- Pages
- 239-255
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W2986077237
- Cited by
- 526
- References
- 109
- Citations by year
- 2026: 75 · 2025: 133 · 2024: 97 · 2023: 87 · 2022: 65 · 2021: 51 · 2020: 18
- FWCI
- 12.04
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Journal of Emerging and Selected Topics in Power Electronics (publishedVersion)
- Funders
- Industry Consortium at the 3-D Systems Packaging Research Center
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electronic Packaging and Soldering Technologies
- Keywords
- silicon carbide power devices, power module packaging, high-speed switching, thermal management, high-temperature operation, high-voltage insulation, low-temperature packaging, aerospace applications
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.