A Review of SiC Power Module Packaging Technologies: Challenges, Advances, and Emerging Issues
The DOI matches its Crossref record; 103 of the 109 references it cites were found in a registry or an index.
Abstract
Power module packaging technologies have been experiencing extensive changes as the novel silicon carbide (SiC) power devices with superior performance become commercially available. This article presents an overview of power module packaging technologies in this transition, with an emphasis on the challenges that current standard packaging face, requirements that future power module packaging needs to fulfill, and recent advances on packaging technologies. The standard power module structure, which is a widely used current practice to package SiC devices, is reviewed, and the reasons why novel packaging technologies should be developed are described in this article. The packaging challenges associated with high-speed switching, thermal management, high-temperature operation, and high-voltage isolation are explained in detail. Recent advances on technologies, which try to address the limitations of standard packaging, both in packaging elements and package structure are summarized. The trend toward novel soft-switching power converters gave rise to problems regarding package designs of unconventional module configuration. Potential applications areas, such as aerospace applications, introduce low-temperature challenges to SiC packaging. Key issues in these emerging areas are highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Conventional wire bonding is often unsuitable for WBG devices, which switch rapidly [25-27].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“The constraints arise from three factors: substantial parasitic inductance, restricted vertical heat removal, and reduced reliability under thermomechanical stress-all of which degrade performance and lifetime [25-27,40].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“Conventional wire bonding, originally developed for Si devices, is a bottleneck that limits the attainable switching speed and power density of WBG packages.”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“DSC has been widely implemented in SiC MOSFET high-power modules and is considered essential for extending device lifetime under high thermal loads [26,41-44].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“The use of thermally conductive adhesive films (TCAFs) reduces interfacial thermal resistance.”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
4 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Review of Silicon Carbide Power Devices and Their Applications
She, X., Huang, A. Q., Lucia, O., & Ozpineci, B. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2652401 · Cited by 1,773 · cited 5×
“manufacturing processes need to be improved to make the cost of SiC devices more justifiable [5], [11].”
BackgroundInfluentialHigh-temperature electronics - a role for wide bandgap semiconductors?
Neudeck, P. G., Okojie, R. S., & Chen, L.-Y. (2002) · Proceedings of the IEEE · doi:10.1109/jproc.2002.1021571 · Cited by 1,050
The resonant DC link converter-a new concept in static power conversion
Divan, D. M. (1989) · IEEE Transactions on Industry Applications · doi:10.1109/28.25548 · Cited by 815
Oswald, N., Anthony, P., McNeill, N., & Stark, B. H. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2278919 · Cited by 504
A review of high-temperature electronics technology and applications
Watson, J., & Castro, G. (2015) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-015-3459-4 · Cited by 378
A Review on Die Attach Materials for SiC-Based High-Temperature Power Devices
Chin, H. S., Cheong, K. Y., & Ismail, A. B. (2010) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-010-9365-5 · Cited by 337
SiC power devices — Present status, applications and future perspective
Ostling, M., Ghandi, R., & Zetterling, C.-M. (2011) · 2011 IEEE 23rd International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2011.5890778 · Cited by 332
Resonant snubbers with auxiliary switches
McMurray, W. (1993) · IEEE Transactions on Industry Applications · doi:10.1109/28.216544 · Cited by 313
A Review of SiC Power Module Packaging: Layout, Material System and Integration
Huazhong University of Science and Technology, & Chen, C. (2017) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2017.00017 · Cited by 310
Chen, Z., Yao, Y., Boroyevich, D., Ngo, K. D. T., Mattavelli, P., & Rajashekara, K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2283245 · Cited by 277
Research works printed but not linked: 21
- 2014, Design Considerations for High Power Module (HPM)
- sandwell, 2018, Electrically Induced Bearing Damage (EIBD) Aka Shaft Currents Aka Electrical Discharge Machining (EDM)
- guth, 2010, New assembly and interconnects beyond sintering methods, Proc Power Convers Intell Motion, 232
- choi, 2017, Overview of Silicon power Devices Fairchild Semiconductors
- 2019, Electric Power Monthly With Data for November 2018
- 2012, Unleashing Growth in Wide Bandgap The Upcoming Disruptions in Power Electronics GSA Semiconductor Leaders Forum Taiwan
- graotxapartegi, 2018, Status of power electronic industry: Market and technology trends, Proc Appl Power Electron Conf Expo
- schoser, 2015, Highly Reliable Transfer-Molded Power Modules
- johnson, 2007, Electronics packaging for extreme environments, Proc Int Planet Probe Workshop, 1
- 2017, Double Side Cooled Module FF400R07A01E3 S6 Data Sheet
- ostmann, 2016, Evolution and future of embedding technology, Proc Int Microelectron Assem Packag Soc, 1
- 2015, Quadrennial Technology Review 2015 Innovating Clean Energy Technologies in Advanced Manufacturing
- lostetter, 1998, Integrated power modules (IPMs), a novel MCM approach to high power electronics design and packaging, Int J Microcircuits Electron Packag, 21, 274
- 2014, DBA (Direct Bonded Aluminum) Substrate
- 2016, Curamik CERAMIC SUBSTRATES-TECHNICAL DATA SHEET
- 2015, Mitsubishi Electric to Release Sample J1-Series Power Modules
- 2012, Products for Electric and Hybrid Vehicles
- 2015, PCBs—Products and Solutions Schweizer Electronic
- 2016, NCAB group seminars—IMS
- casady, 2013, SiC power devices and modules maturing rapidly, Power Electron Eur, 1, 16
- 2016, Trends and Developments
Cited by
Items 401–500 of 561
Nanoscale Mapping of Sub‐Gap Electroluminescence from Step‐Bunched, Oxidized 4H‐SiC Surfaces
Alyabyeva, N., Ding, J., Sauty, M., Woerle, J., Jousseaume, Y., Ferro, G., McCallum, J. C., Peretti, J., Johnson, B. C., & Rowe, A. C. H. (2023) · physica status solidi (b) · doi:10.1002/pssb.202370013 · Cited by 1
Siddaiah, R., Ordonez, J., & Cuzner, R. (2023) · International Conference on Performance Engineering · doi:10.23919/icpe2023-ecceasia54778.2023.10213500 · Cited by 1
Chen, M., Wang, Y., & Yin, Y. (2023) · International Symposium on Electrical Insulating Materials (ISEIM) · doi:10.23919/iseim60444.2023.10329174 · Cited by 1
Analysis of Switching Loss Based on Gate Resistance in a SiC MOSFET Inverter
Park, M.-G., & Lee, K. (2023) · IEEE Conference on Energy Conversion · doi:10.1109/cencon58932.2023.10369202 · Cited by 1
Fabrication Process Optimization of A High- Power Double-Sided Cooled SiC Power Module
Chen, Y., Du, L., Du, X., Alher, M. A., Iradukunda, A., Huitink, D. R., Chen, Z., & Mantooth, A. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362699 · Cited by 1
Copper Nanowired Interconnection for Embedding Power Dies in PCB
Mendes, C. C. O., Morand, J., Bley, V., & Cambronne, J.-P. (2023) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce53617.2023.10362755 · Cited by 1
A Wire-less SiC Power Module Using Flip-Chip Sintering Method
Liu, Y., Yan, H., Yang, D., Li, W., Liu, C., & Zhang, Y. (2023) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept59018.2023.10492257 · Cited by 1
Liu, B., Lv, J., Yan, Y., Du, M., Zhang, Y., Chen, C., Liu, J., Kang, Y. C., Yu, C., & Wang, M. (2024) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec48139.2024.10509025 · Cited by 1
Enhancing Electrical Ruggedness in Double-Sided Cooled Power Modules
Scognamillo, C., Catalano, A. P., Codecasa, L., Castellazzi, A., & d’Alessandro, V. (2024) · Conference on Ph.D. Research in Microelectronics and Electronics · doi:10.1109/prime61930.2024.10559704 · Cited by 1
Mitigating Space Charge Injection and Accumulation Using Electrets in Low Pressures
Saha, P. C., Faruqe, O., Juberi, A. M., & Park, C. (2024) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec60657.2024.10598949 · Cited by 1
Ramoneda, A. C., Avenas, Y., Khazaka, R., Gautier, C., & Youssef, T. (2024) · International Workshop on Thermal Investigations of ICs and Systems · doi:10.1109/therminic62015.2024.10732535 · Cited by 1
Numerical Investigation on the Thermal Resistance and Assembly Cost in SSC and DSC Power Modules
Scognamillo, C., Catalano, A. P., Codecasa, L., Castellazzi, A., & d’Alessandro, V. (2024) · International Workshop on Thermal Investigations of ICs and Systems · doi:10.1109/therminic62015.2024.10732581 · Cited by 1
Janabi, A., Shillaber, L., Ying, W., Mu, W., Hu, B., Ren, X., & Long, T. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861500 · Cited by 1
Chinnaiyan, S., Lai, P., Ahmed, S., Li, X., Sim, C., Maruf, M. H. U., Chen, Y., Ware, M. E., Chen, Z., & Mantooth, H. A. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861060 · Cited by 1
Bhalotia, A., Ranjit, S., Nag, S. S., Mirdoddi, K., Gopikrishnan, K., Chaudhary, A., Pramanick, S. K., Das, A., Morianz, M., Weis, G., et al. (2025) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel57166.2025.11121202 · Cited by 1
Dielectric Characterization of Polyimide for UWBG Power Module Packaging at High Temperature
Mouri, Z. F., Shagor, M. R. K., Haque, F., & Saha, S. (2025) · IEEE Electrical Insulation Conference (EIC) · doi:10.1109/eic63069.2025.11123367 · Cited by 1
Development and Electrical Characteristics Study of a 10kV/125A SiC MOSFET Module
Zhang, Y., Chen, Y., Xu, C., & Zhang, X. (2025) · IEEE Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia) · doi:10.1109/wipda-asia63772.2025.11183985 · Cited by 1
Growth of lattice-mismatched iii-phosphide optoelectronic devices by molecular beam epitaxy
Kim, M. (2023) · Illinois Digital Environment for Access to Learning and Scholarship (University of Illinois at Urbana-Champaign) · Cited by 1
Silicon Carbide (SiC) Insulated Gate Bipolar Transistors (IGBTs) for High Voltage Applications
Almpanis, I. (2025) · Nottingham ePrints (University of Nottingham) · doi:10.13140/rg.2.2.15890.98240 · Cited by 1
Short-Circuit Capacity from Inverter-Based Resources
Haväng, A., & Klangeryd, S. (2025) · Lund University Publications Student Papers (Lund University) · Cited by 1
Athwer, A., Badawy, A., & Ma, X. (2026) · Lancaster EPrints (Lancaster University) · Cited by 1
Maleimide Resin Blends with Enhanced Toughness for High-Temperature Semiconductor Packaging
Kikuchi, K., Karasawa, Y., Watanabe, Y., Sugino, T., & Suetsugu, T. (2021) · Transactions of The Japan Institute of Electronics Packaging · doi:10.5104/jiepeng.14.e21-001-1
Designing a Graphical User Interface for the Power Module Optimization Tool PowerSynth
Mitchener, J., Razi, I. A., & Peng, Y. (2021) · ASEE Midwest Section Conference · doi:10.18260/1-2-1125.1153-38342
Failure Analysis and Stress Evaluation of Maleimide Molding Films during Temperature Cycling
Kikuchi, K., Uemura, K., & Suetsugu, T. (2021) · Transactions of The Japan Institute of Electronics Packaging · doi:10.5104/jiepeng.14.e21-005-1
D-Transform Based Control of Power Converters
Rosa, A. H. R., Silva, W. W. A. G., He, W., da Silva, F. A., Morais, L. M. F., & Seleme, S. I. (2022) · Eletrônica de Potência · doi:10.18618/rep.2022.1.0046
Interaction of advanced copper metallization with the assembly and interconnection technology
Losbichler, D., Klingler, M., Orso, S., & Wunderle, B. (2022) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime54907.2022.9758903
Design of Low Parasitic Inductance SiC MOSFETs Halfbridge Power Modules
Wang, Y., Gong, J., Song, Q., luo, L., Zhang, B., & Guo, Q. W. (2022) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2224/1/012120
Multi-objective Optimization Design of PV Inverter Based on DO-NSGAIII Algorithm
Wang, J., Xie, L., Peng, Q., & Yang, R. (2022) · Lecture notes in electrical engineering · doi:10.1007/978-981-19-1532-1_116
Namgoong, D., & Lee, J. (2022) · Journal of Welding and Joining · doi:10.5781/jwj.2022.40.3.6
Wei, Z., Ji, Z., Yue, Z., Ji, X., Xia, Z., Han, J., Ma, L., & Guo, F. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4102989
Du, X., Zhang, J., Li, G., Yu, Y., Qian, C., & Du, R. (2022) · CPSS power electronics series · doi:10.1007/978-981-19-3132-1_7
Ji, Z., Zhou, W., Wang, Y., Ji, X., Yu, K., & Guo, F. (2022) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept56209.2022.9872599
Effect of Sintering Process on the Mechanical Properties of Silicon Nitride
Yue, Y., Yu, C., Wang, M., & Lei, G. (2022) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept56209.2022.9873272
High-Temperature Reliability of Sintered Silver-Tin Alloy Paste for Die Attach Applications
Huang, W., Tsai, C.-H., & Kao, C. R. (2022) · Electronic System-Integration Technology Conference (ESTC) · doi:10.1109/estc55720.2022.9939385
A study on electrical properties of silicon carbide power devices
Hu, X. (2023) · Theoretical and Natural Science · doi:10.54254/2753-8818/5/20230396
Kano, A., Hirohata, K., Kato, M., Ota, C., Okada, A., Nishio, J., & Shibutani, Y. (2023) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/acf74c
Saha, J., Gorla, N. B. Y., & Panda, S. K. (2023) · doi:10.36227/techrxiv.24272290.v1
Silva, P. H. A., Silva, E. C., Rocha, L. R., Eckert, P. R., & Vieira, R. P. (2022) · Congresso Brasileiro de Automática · doi:10.20906/cba2022/3332
Bugakova, A. V., Kuznetsov, D. V., Евгеньевич, Ч. В., Kleimenkin, D. V., & Sergeenko, M. A. (2023) · Известия Южного федерального университета. Технические науки · doi:10.18522/2311-3103-2023-4-241-254
Liu, D., Wen, P.-C., Zhuang, Z.-W., Chung, C.-L., Chen, B.-H., Chang, P.-I., & Huang, P. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.108369
Thickness Effect of Copper Clips on Power Module Packaging Design
Wan, H., Iosifidis, N., Zhang, X., Rong, R., Antoniou, M., & Mawby, P. (2024) · IMAPSource Proceedings · doi:10.4071/001c.94846
Experimental Reliability Assessment of ACEPACK SMIT Power Module
Amoroso, D. M., Schifano, B., Calabretta, M., Mauromicale, G., & Sequenzia, G. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-52075-4_49
Hu, D., Li, Z., Fan, J., & Zhang, G. (2023) · IEEE Electronics Packaging Technology Conference (EPTC) · doi:10.1109/eptc59621.2023.10457748
Ockel, M., Sippel, M., Hecht, C., Janisch, L., & Franke, J. E. (2023) · IEEE Electronics Packaging Technology Conference (EPTC) · doi:10.1109/eptc59621.2023.10457786
Preparation of Nano-foam Sheet and Its Application in High Temperature Packaging of Power Chips
Zhang, H., Yin, C., Zhang, J., He, S., & Guo, W. (2023) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept59018.2023.10492041
Numerical simulation of bonding wire lift-off of IGBT under power cycling
Zhao, S., An, T., Qin, F., & Wang, Z. (2023) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept59018.2023.10492198
Kim, M., Sun, Y., & Lee, M. L. (2024) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2024.3384916
Convex structure formation on a Cu substrate by friction stirring using a tool wrapped with Ti foil
Sonomura, H., KATAGIRI, K., Ozaki, T., Hasegawa, Y., & Tanaka, T. (2024) · Results in Surfaces and Interfaces · doi:10.1016/j.rsurfi.2024.100282
Malik, A. H., Karout, M. A., Wan, H., Gonzalez, J. A. O., Mawby, P., & Taha, M. (2024) · Power Electronic Devices and Components · doi:10.1016/j.pedc.2024.100070
Tsuyuno, N., Kusukawa, J., Tokuyama, T., Matsushita, A., Nakatsu, K., & Ishii, T. (2024) · Journal of The Japan Institute of Electronics Packaging · doi:10.5104/jiep.jiep-d-24-00015
Improvement of Bonding Strength for Ag Sinter Joining Direct on Al Heatsink in SiC Power Module
Chen, C., Suganuma, K., & Kobayashi, K. (2024) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept63120.2024.10668619
An Evaluation of Microtube Array Density for Liquid Delivery in Pump-Assisted Capillary Loop Coolers
Lohan, D. J., Joshi, S. N., Dede, E. M., Sarma, B., & Weibel, J. A. (2024) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm55375.2024.10709506
Morosuk, T. (2024) · IntechOpen eBooks · doi:10.5772/intechopen.1004481
Marroquí, D., Garrigos, A., Maset, E., Alcaraz, D., Terol, G., Blanes, J. M., & Casado, P. (2024) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda62103.2024.10773233
Hitoshi, Y., Yuki, K., Yuki, K., Nakaoka, T., & Goto, M. (2024) · Transactions of The Japan Institute of Electronics Packaging · doi:10.5104/jiepeng.17.e24-003-1
Impacts of Parasitic Power Loop Inductance on 10 kV SiC MOSFETs
Liu, G., Yan, Z., Nielsen, M. R., Jørgensen, J. K., Zhao, H., Munk‐Nielsen, S., & Bech, M. M. (2024) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce55643.2024.10861436
Vitrimers: new opportunities for high performance sustainable power electronics packaging
Arati, B., Marina, L., & Coccetti, F. (2025) · IEEE International Workshop on Integrated Power Packaging (IWIPP) · doi:10.1109/iwipp61784.2025.10971497
Guerrero, M., Özdemir, O. Ç., Zhu, N., Allison, P., Jordon, B., & Quintero, P. (2025) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2025.3564520
Raya, M., Solà, E., Sánchez, D., Vellvehi, M., Perpiñà, X., & Jordà, X. (2025) · International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE) · doi:10.1109/eurosime65125.2025.11006561
Research of Thermal Management Optimization for Sic Power Modules Utilizing Thermoelectric CoolersPreprint
Liu, T., Yang, J., Zhao, Y., Yu, Z., Hui, X., Li, D. Q., Kang, Y., Tai, K., Ning, P., Yan, X., et al. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5340573
Chip-Level Interconnection Techniques for Chip Embedding Integration of SiC MOSFETs
Solà, E., Raya, M., Lasserre, P., Sánchez, D., Rebollo, J., Vellvehi, M., Perpiñà, X., & Jordà, X. (2025) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.23919/ispsd62843.2025.11117506
Study on the Effect of Cu Buffer and Cu-Wire Bonds on SiC Device Performance
He, Y., Li, X., & Ma, Y. (2025) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2025.3600681
Parylene HT Electrets Charge Stability Analysis at High Temperatures
Saha, P. C., Faruqe, O., Juberi, A. M., & Park, C. (2025) · IEEE Electrical Insulation Conference (EIC) · doi:10.1109/eic63069.2025.11123279
Liu, R., Qiu, H., Tian, B., Chen, D., Wang, X., Xu, J., Mou, Y., & Guan, Q. (2025) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept67137.2025.11157566
Li, X., Chen, F., Fan, X., Liu, M., Ding, L., Luo, Y., Sun, B., & Chen, K. (2025) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept67137.2025.11157197
Preparation of high-performance Cf/SiC composites by regulating pore structure of preform
Sun, C., Yang, C., Gu, D., Gao, X., Liu, K., Zhang, S., Yang, M., Chen, P., Gong, X., Yan, C., et al. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.09.315
A Method for Extracting DC Bias Characteristics of Power Modules for Full-Bridge Inverter
Rhee, J., Lee, S., Lee, C., Kim, J., Kim, H., & Ahn, S. (2025) · International Symposium on Electromagnetic Compatibility - EMC Europe (EMC Europe) · doi:10.1109/emceurope61644.2025.11176215
Continuous and Categorical Bayesian Optimization for 3D Power Module Package & Cold Plate Design
Lohan, D. J., Joshi, S. N., & Dede, E. M. (2025) · International Symposium on 3D Power Electronics Integration and Manufacturing (3D-PEIM) · doi:10.1109/3d-peim64703.2025.11180264
SiC Power Module with Staggered Terminals Layout Design to Reduce Parasitic Inductance
Wang, J.-X., Jiang, X., Ouyang, R., Yuan, S., Zhao, Y., Hu, Q., Wang, Y., & Gong, X. (2025) · IEEE Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia) · doi:10.1109/wipda-asia63772.2025.11183879
Li, Y., Tian, B., Zhao, B., Sun, P., Zhao, Z., Xu, C., Chen, Y., Pei, X., Li, J., & Wu, H. (2025) · IEEE Workshop on Wide Bandgap Power Devices and Applications in Asia (WiPDA Asia) · doi:10.1109/wipda-asia63772.2025.11184087
Schmied, N., Kerscher, M., Matlok, S., & Maerz, M. (2025) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2025.3626119
Influence of Uneven Chip Solder Layer Thickness on the Reliability of Power Modules
Aksoy, A., Wagner, F., & Sippel, M. (2025) · European Microelectronics and Packaging Conference · doi:10.23919/empc63132.2025.11222528
Inkjet Printing of Copper Metallization for Silicon Carbide MOSFETs
Tian, X., Alavi, G., Polzinger, B., & Zimmermann, A. (2025) · European Microelectronics and Packaging Conference · doi:10.23919/empc63132.2025.11222457
Kalakonda, S. P., Rifat, M. J. H., & Ghassemi, M. (2025) · IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) · doi:10.1109/ceidp61707.2025.11218289
SiO 2 -Doped Heatproof Silicone Gel Composite with Modified Space Charge Characteristics
Zhang, X., Lv, Z., Zhang, C., & Wu, K. (2025) · IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) · doi:10.1109/ceidp61707.2025.11218278
Lifetime Prediction of SiC MOSFET by LSTM Based on IGWO Algorithm
Dai, P. C., Bao, J., Gong, Z., Gao, M., & Xu, Q. (2025) · Electronics · doi:10.3390/electronics14224486
Thermal management of stacked die power module
Barua, H., Chowdhury, S., Ribeiro, P., & Ozpineci, B. (2025) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm55376.2025.11235770
Qie, Z., Lou, Y., Zhang, X., & Yao, Z. (2025) · Applied Physics A · doi:10.1007/s00339-025-09154-x
Switching Characteristics of Hybrid Multi-Parallel Connected Si IGBT / SiC MOSFET
Ibuchi, T., & Funaki, T. (2025) · IEEJ Transactions on Fundamentals and Materials · doi:10.1541/ieejfms.145.380
Greener Tech: Achieving Sustainable Manufacturing through Innovation in the Semiconductor Industry
Abuan, D. D., Tablada, A. J. F., Amadora, J. E. G., Borebor, A. M. K., & Montaño, R. D. L. (2024) · IEEE International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment, and Management (HNICEM) · doi:10.1109/hnicem64917.2024.11258825
Polycrystalline Lpcvd 3c-Sic Thin Films on Sio2 Using Alternating Supply DepositionPreprint
Moll, P., Schwarz, S., Pfusterschmied, G., Artner, W., & Schmid, U. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4840012
PCB-Based 1.2 kV SiC MOSFET Packages for High Power Density Electric Vehicle On-Board Chargers
Knoll, J. (2022) · VTechWorks (Virginia Tech)
Roy, A. (2024) · VTechWorks (Virginia Tech)
Tang, T., Luo, Z., Fang, X., Li, Z., Peng, S., & Yu, P. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5544745
Fast thermal reconstruction method for power module based on dilated convolution
Chen, W., Wang, L., Zhang, J., & Zhang, Z. (2025) · IEEE ECCE Asia Downunder · doi:10.1109/ecce-asia63110.2025.11112467
Zhou, Y., Wang, Z., Shen, D., Man, C., Xingshan, L., Hu, G., & Shi, X. (2025) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2025.3647112
Maximum Electric Field Analysis in a Power Module Using Schwarz–Christoffel Transformation
Sircar, A., & Yao, X. (2025) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2025.3648657
Recyclable-Oriented Easy-to-Disassemble 3D packaging for Power Semiconductors
Ren, Y., Chen, P., Wei, J., Cheng, J., Zhao, S., Li, H., Deng, E., Chen, C. L., Ran, L., & Ding, L. (2025) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda63755.2025.11303415
Mouri, Z. F., Littlefield, N., Soucek, M. D., & Haque, F. (2025) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda63755.2025.11303399
Xu, Y., Yao, J., Dai, Y., Hu, Z., Yang, F., Yang, K., Xu, B., Cai, Z., & Guo, Y. (2025) · International Conference on Integrated Circuits and Microsystems (ICICM) · doi:10.1109/icicm66614.2025.11315975
Li, T., Zhai, X., Deng, Z., Zhang, L., Liu, X., & Chen, X. (2026) · Energies · doi:10.3390/en19030637
Rhee, J., Lee, S., Ha, S., Kim, H., Kim, J., Shin, D., Woo, S., Son, S., & Ahn, S. (2025) · Asia-Pacific Microwave Conference (APMC) · doi:10.1109/apmc65046.2025.11378331
Research on the Application of Advanced Packaging Technology in Parasitic Inductance Optimization
Wu, J. (2025) · International Forum on Electrical Engineering and Automation (IFEEA) · doi:10.1109/ifeea66847.2025.11388924
Nanotwin Ag-Assisted Cu-Clip Bonding for Power Module Packaging
Dao, T. M. A., Chen, C., Hong, Y.-H., & Hsu, M.-H. (2025) · IEEE Electronics Packaging Technology Conference (EPTC) · doi:10.1109/eptc67330.2025.11392116
Yin, H., Zhu, C., Dong, T., Yang, L., & Zhang, X. (2026) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2026.3668392
A High Power Density Amplifier Unit Structure
Long, G., Xiong, Q., Liu, W., & Kong, W. (2025) · IEEE International Power Electronics and Application Symposium (PEAS) · doi:10.1109/peas66638.2025.11403348
Dou, J., Wang, Z., Man, C., Shen, D., Li, X., & Hu, G. (2025) · IEEE International Power Electronics and Application Symposium (PEAS) · doi:10.1109/peas66638.2025.11403421
Luo, R., Pan, X., Sun, P., Zou, M., Liang, Y., Gong, J., & Zeng, Z. (2025) · IEEE International Power Electronics and Application Symposium (PEAS) · doi:10.1109/peas66638.2025.11403716
Yan, H., Li, X., Pan, Y., Jin, R., & Zhao, Z. (2026) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2026.3665562
Thermal-Structural Modeling of a SiC-Based Power Module Subjected to Spatial Temperature Gradients
Mirone, G., Bua, G., & Barbagallo, R. (2026) · Conference of the Italian Association for Stress Analysis (AIAS) · doi:10.3390/engproc2026131005
Metadata
- Authors
- Lee, H., Smet, V., & Tummala, R.
- Affiliations
- Georgia Institute of Technology (US)
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2020-03
- Volume
- 8
- Issue
- 1
- Pages
- 239-255
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W2986077237
- Cited by
- 526
- References
- 109
- Citations by year
- 2026: 75 · 2025: 133 · 2024: 97 · 2023: 87 · 2022: 65 · 2021: 51 · 2020: 18
- FWCI
- 12.04
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Journal of Emerging and Selected Topics in Power Electronics (publishedVersion)
- Funders
- Industry Consortium at the 3-D Systems Packaging Research Center
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electronic Packaging and Soldering Technologies
- Keywords
- silicon carbide power devices, power module packaging, high-speed switching, thermal management, high-temperature operation, high-voltage insulation, low-temperature packaging, aerospace applications
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.