A Review of SiC Power Module Packaging Technologies: Challenges, Advances, and Emerging Issues
The DOI matches its Crossref record; 103 of the 109 references it cites were found in a registry or an index.
Abstract
Power module packaging technologies have been experiencing extensive changes as the novel silicon carbide (SiC) power devices with superior performance become commercially available. This article presents an overview of power module packaging technologies in this transition, with an emphasis on the challenges that current standard packaging face, requirements that future power module packaging needs to fulfill, and recent advances on packaging technologies. The standard power module structure, which is a widely used current practice to package SiC devices, is reviewed, and the reasons why novel packaging technologies should be developed are described in this article. The packaging challenges associated with high-speed switching, thermal management, high-temperature operation, and high-voltage isolation are explained in detail. Recent advances on technologies, which try to address the limitations of standard packaging, both in packaging elements and package structure are summarized. The trend toward novel soft-switching power converters gave rise to problems regarding package designs of unconventional module configuration. Potential applications areas, such as aerospace applications, introduce low-temperature challenges to SiC packaging. Key issues in these emerging areas are highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Conventional wire bonding is often unsuitable for WBG devices, which switch rapidly [25-27].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“The constraints arise from three factors: substantial parasitic inductance, restricted vertical heat removal, and reduced reliability under thermomechanical stress-all of which degrade performance and lifetime [25-27,40].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“Conventional wire bonding, originally developed for Si devices, is a bottleneck that limits the attainable switching speed and power density of WBG packages.”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“DSC has been widely implemented in SiC MOSFET high-power modules and is considered essential for extending device lifetime under high thermal loads [26,41-44].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“The use of thermally conductive adhesive films (TCAFs) reduces interfacial thermal resistance.”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
4 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Review of Silicon Carbide Power Devices and Their Applications
She, X., Huang, A. Q., Lucia, O., & Ozpineci, B. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2652401 · Cited by 1,773 · cited 5×
“manufacturing processes need to be improved to make the cost of SiC devices more justifiable [5], [11].”
BackgroundInfluentialHigh-temperature electronics - a role for wide bandgap semiconductors?
Neudeck, P. G., Okojie, R. S., & Chen, L.-Y. (2002) · Proceedings of the IEEE · doi:10.1109/jproc.2002.1021571 · Cited by 1,050
The resonant DC link converter-a new concept in static power conversion
Divan, D. M. (1989) · IEEE Transactions on Industry Applications · doi:10.1109/28.25548 · Cited by 815
Oswald, N., Anthony, P., McNeill, N., & Stark, B. H. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2278919 · Cited by 504
A review of high-temperature electronics technology and applications
Watson, J., & Castro, G. (2015) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-015-3459-4 · Cited by 378
A Review on Die Attach Materials for SiC-Based High-Temperature Power Devices
Chin, H. S., Cheong, K. Y., & Ismail, A. B. (2010) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-010-9365-5 · Cited by 337
SiC power devices — Present status, applications and future perspective
Ostling, M., Ghandi, R., & Zetterling, C.-M. (2011) · 2011 IEEE 23rd International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2011.5890778 · Cited by 332
Resonant snubbers with auxiliary switches
McMurray, W. (1993) · IEEE Transactions on Industry Applications · doi:10.1109/28.216544 · Cited by 313
A Review of SiC Power Module Packaging: Layout, Material System and Integration
Huazhong University of Science and Technology, & Chen, C. (2017) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2017.00017 · Cited by 310
Chen, Z., Yao, Y., Boroyevich, D., Ngo, K. D. T., Mattavelli, P., & Rajashekara, K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2283245 · Cited by 277
Research works printed but not linked: 21
- 2014, Design Considerations for High Power Module (HPM)
- sandwell, 2018, Electrically Induced Bearing Damage (EIBD) Aka Shaft Currents Aka Electrical Discharge Machining (EDM)
- guth, 2010, New assembly and interconnects beyond sintering methods, Proc Power Convers Intell Motion, 232
- choi, 2017, Overview of Silicon power Devices Fairchild Semiconductors
- 2019, Electric Power Monthly With Data for November 2018
- 2012, Unleashing Growth in Wide Bandgap The Upcoming Disruptions in Power Electronics GSA Semiconductor Leaders Forum Taiwan
- graotxapartegi, 2018, Status of power electronic industry: Market and technology trends, Proc Appl Power Electron Conf Expo
- schoser, 2015, Highly Reliable Transfer-Molded Power Modules
- johnson, 2007, Electronics packaging for extreme environments, Proc Int Planet Probe Workshop, 1
- 2017, Double Side Cooled Module FF400R07A01E3 S6 Data Sheet
- ostmann, 2016, Evolution and future of embedding technology, Proc Int Microelectron Assem Packag Soc, 1
- 2015, Quadrennial Technology Review 2015 Innovating Clean Energy Technologies in Advanced Manufacturing
- lostetter, 1998, Integrated power modules (IPMs), a novel MCM approach to high power electronics design and packaging, Int J Microcircuits Electron Packag, 21, 274
- 2014, DBA (Direct Bonded Aluminum) Substrate
- 2016, Curamik CERAMIC SUBSTRATES-TECHNICAL DATA SHEET
- 2015, Mitsubishi Electric to Release Sample J1-Series Power Modules
- 2012, Products for Electric and Hybrid Vehicles
- 2015, PCBs—Products and Solutions Schweizer Electronic
- 2016, NCAB group seminars—IMS
- casady, 2013, SiC power devices and modules maturing rapidly, Power Electron Eur, 1, 16
- 2016, Trends and Developments
Cited by
Reliability of Power Electronic Systems for EV/HEV Applications
Blaabjerg, F., Wang, H., Vernica, I., Liu, B., & Davari, P. (2021) · Proceedings of the IEEE · doi:10.1109/jproc.2020.3031041 · Cited by 249
“6 shows the respective advances in packaging elements for interconnection, substrate, and die attach of power modules, as presented in [18].”
BackgroundInfluentialPower Electronics Reliability: State of the Art and Outlook
Wang, H., & Blaabjerg, F. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3037161 · Cited by 218
Catalán, P., Wang, Y., Arza, J., & Chen, Z. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3234221 · Cited by 197
Qin, Y., Albano, B., Spencer, J., Lundh, J. S., Wang, B., Buttay, C., Tadjer, M., DiMarino, C., & Zhang, Y. (2023) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/acb4ff · Cited by 195
Shi, B., Ramones, A. I., Liu, Y., Wang, H., Li, Y., Pischinger, S., & Andert, J. (2023) · IET Power Electronics · doi:10.1049/pel2.12524 · Cited by 184
A review on energy efficient technologies for electric vehicle applications
Yadlapalli, R. T., Kotapati, A., Kandipati, R., & Koritala, C. S. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104212 · Cited by 168
A Review of System-in-Package Technologies: Application and Reliability of Advanced Packaging
Wang, H., Ma, J., Yang, Y., Gong, M., & Wang, Q. (2023) · Micromachines · doi:10.3390/mi14061149 · Cited by 156
Liu, M., Coppola, A. M., Alvi, M. H., & Anwar, M. (2022) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2022.3166684 · Cited by 148
Yang, S., Li, J., Cao, B., Wu, Z., & Sheng, K. (2023) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2023.124792 · Cited by 139
ISAC—A Survey on Its Layered Architecture, Technologies, Standardizations, Prototypes, and Testbeds
Luo, X., Lin, Q., Zhang, R., Chen, H., Wang, X., & Huang, M. (2025) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2025.3565534 · Cited by 136
Extreme high efficiency enabled by silicon carbide (SiC) power devices
Chen, Z., & Huang, A. Q. (2023) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2023.108052 · Cited by 134
Ding, C., Liu, H., Ngo, K. D. T., Burgos, R. P., & Lu, G. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3070326 · Cited by 126
Jet-enhanced manifold microchannels for cooling electronics up to a heat flux of 3,000 W cm−2
Wu, Z., Xiao, W., He, H., Wang, W., & Song, B. (2025) · Nature Electronics · doi:10.1038/s41928-025-01449-4 · Cited by 111
Low-temperature copper sinter-joining technology for power electronics packaging: A review
Wang, Y., Xu, D., Yan, H., Li, C., Chen, C., & Li, W. (2024) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2024.118526 · Cited by 94
High-Power Electronic Applications Enabled by Medium Voltage Silicon-Carbide Technology: An Overview
Nielsen, M. R., Deng, S.-Y., Mirza, A., Kjærsgaard, B. F., Jørgensen, A., Zhao, H.-B., Li, Y., Munk-Nielsen, S., & Luo, F. (2025) · IEEE transactions on power electronics · doi:10.1109/tpel.2024.3442483 · Cited by 82
Wang, L., Zhang, T., Yang, F., Ma, D., Zhao, C., Pei, Y., & Gan, Y. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3141373 · Cited by 86
Industry perspective on power electronics for electric vehicles
Tu, C., Hung, C.-L., Hong, K., Elangovan, S., Yu, W.-C., Hsiao, Y.-S., Lin, W., Kumar, R., Huang, Z.-H., Hong, Y., et al. (2024) · Nature Reviews Electrical Engineering · doi:10.1038/s44287-024-00055-4 · Cited by 93
Kim, D., Nagao, S., Chen, C., Wakasugi, N., Yamamoto, Y., Suetake, A., Takemasa, T., Sugahara, T., & Suganuma, K. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3031670 · Cited by 87
Yang, F., Lixin, J., Wang, L., Zhang, F., Wang, B., Zhao, C., Wang, J., Bayer, C., & Ferreira, J. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3106316 · Cited by 80
Power electronic converter reliability and prognosis review focusing on power switch module failures
Abuelnaga, A. H., Narimani, M., & Bahman, A. S. (2021) · Journal of Power Electronics · doi:10.1007/s43236-021-00228-6 · Cited by 77
Yuan, Y., Wu, H., Li, J., Zhu, P., & Sun, R. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.151220 · Cited by 76
The role of power device technology in the electric vehicle powertrain
Robles, E., Matallana, A., Aretxabaleta, I., Andreu, J., Fernández, M., & Martín, J. L. M. (2022) · International Journal of Energy Research · doi:10.1002/er.8581 · Cited by 75
Review of Topside Interconnections for Wide Bandgap Power Semiconductor Packaging
Wang, L., Wang, W., Hueting, R. J. E., Rietveld, G., & Ferreira, J. A. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3200469 · Cited by 73
“It took some time, however, for the SiC bare die to be implemented into power modules as well [40].”
BackgroundMethodReview of Active Thermal Control for Power Electronics: Potentials, Limitations, and Future Trends
Ibrahim, A., Salem, M., Jamil, M. K. M., Outeiro, M. T., & Desa, M. K. M. (2024) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2024.3376086 · Cited by 71
A Review of Recent Trends in High-Efficiency Induction Motor Drives
Azab, M. A. (2025) · Vehicles · doi:10.3390/vehicles7010015 · Cited by 70
Abramushkina, E. E., Zhaksylyk, A., Geury, T., Baghdadi, M. E., & Hegazy, O. (2021) · Energies · doi:10.3390/en14164981 · Cited by 66
High-Temperature Encapsulation Materials for Power Modules: Technology and Future Development Trends
Gao, H., & Liu, P. (2022) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2022.3225960 · Cited by 63
Li, J., Ren, C., Sun, Z., Ren, Y., Lee, H., Moon, K., & Wong, C. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c20537 · Cited by 60
Self-citationMu, W., Wang, L., Wang, B., Zhang, T., Yang, F., Gan, Y., & Zhang, H. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3125329 · Cited by 59
Park, C. (2020) · IEEE Access · doi:10.1109/access.2020.2990310 · Cited by 58
Li, Y., Hassan, M. U., Mirza, A. B., Xie, Y., Deng, S., Vala, S. S., Luo, F., Feng, X., Narumanchi, S. V. J., & Flicker, J. (2024) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2024.3391653 · Cited by 58
Ultra-thermostable embedded liquid cooling in SiC 3D packaging power modules of electric vehicles
Zhang, X., Zhao, X., Li, W., Wang, Z., Liao, A., Song, Y., Wang, Y., & Zhang, L. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.116499 · Cited by 57
Jeon, J.-J., Seong, J., Lim, J., Kim, M. K., Kim, T., & Yoon, S. W. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.2998546 · Cited by 57
Jacobs, K., Heinig, S., Johannesson, D., Norrga, S., & Nee, H. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3049320 · Cited by 57
Parasitic Capacitive Couplings in Medium Voltage Power Electronic Systems: An Overview
Kjærsgaard, B. F., Liu, G., Nielsen, M. R., Wang, R., Dalal, D. N., Aunsborg, T. S., Jørgensen, J. K., Yan, Z., Jacobsen, J., Wu, R. L., et al. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3269582 · Cited by 55
Ravindran, R., & Massoud, A. M. (2025) · Microelectronic Engineering · doi:10.1016/j.mee.2025.112348 · Cited by 44
High thermal conductivity of epoxy-based composites utilizing 3D porous boron nitride framework
Chi, Q., Zhang, X., Wang, X., Zhang, C., Zhang, Y., Tang, C., Li, Z., & Zhang, T. (2022) · Composites Communications · doi:10.1016/j.coco.2022.101195 · Cited by 54
A Review of Low-Temperature Solders in Microelectronics Packaging
Jayaram, V., Gupte, O., Bhangaonkar, K., & Nair, C. (2023) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2023.3271269 · Cited by 54
Ma, C.-T., & Gu, Z.-H. (2021) · Micromachines · doi:10.3390/mi12010065 · Cited by 52
Adhikari, P., & Ghassemi, M. (2024) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/tdei.2024.3382070 · Cited by 51
Alizadeh, R., & Mantooth, H. A. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3068760 · Cited by 51
Circuit-Based Electrothermal Modeling of SiC Power Modules With Nonlinear Thermal Models
Race, S., Philipp, A., Nagel, M., Ziemann, T., Kovacevic-Badstuebner, I., & Großner, U. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3147688 · Cited by 51
Wang, M., Mei, Y., Hu, W., Li, X., & Lu, G. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3150223 · Cited by 50
Reliability of Power Semiconductor Modules: A State-of-the-Art Review
Agirrezabala, E., Aizpuru, I., Garrido, D., & Portillo, A. (2025) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2025.3576994 · Cited by 50
High Performance SiC Power Module Based on Repackaging of Discrete SiC Devices
Chen, Z., & Huang, A. Q. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3263466 · Cited by 49
Electrical Properties of Silicone Gel for WBG-Based Power Module Packaging at High Temperatures
Zhang, B., Yang, Z., Li, K., Jiang, X., Li, X., Chang, G., & Ghassemi, M. (2022) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/tdei.2022.3228759 · Cited by 46
Cheng, H., Syu, J.-Y., Wang, H.-H., Liu, Y.-C., Kao, K., & Chang, T. (2024) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2024.3364695 · Cited by 47
Zhang, Y., Heimler, P., Abuogo, J. O., Zhang, X., Zhang, Y., Xie, D., Zhang, Y., Zhang, K., Li, X., Luo, H., et al. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3595180 · Cited by 46
Electrets: A Remedy for Partial Discharge Caused by Power Electronics Switching
Park, C. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.3045707 · Cited by 46
Ding, C., Lu, S., Zhang, Z., Zhang, K., Nguyen, T. K. T., Ngo, K. D. T., Burgos, R. P., & Lu, G. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3273570 · Cited by 45
Wang, C., Lin, Q., Pan, Z., Hong, J., & Zhou, Y. (2023) · Applied Energy · doi:10.1016/j.apenergy.2023.122453 · Cited by 45
Zhou, Y., Jin, Y., Chen, Y., Luo, H., Li, W., & He, X. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3157873 · Cited by 44
Single-Phase Dielectric Fluid Thermal Management for Power-Dense Automotive Power Electronics
Moreno, G., Narumanchi, S. V. J., Tomerlin, J., & Major, J. J. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3171744 · Cited by 44
Review of High-Temperature Power Electronics Converters
Xiao, Y., Zhang, Z., Duraij, M. S., Zsurzsan, T., & Andersen, M. A. E. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3148192 · Cited by 43
Yu, R., Jahdi, S., Mellor, P., Liu, L., Yang, J., Shen, C., Alatise, O. M., & Gonzalez, J. A. O. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3290387 · Cited by 43
Zhang, W., Zhang, P., Lu, D., Pan, H., Liu, X., Xu, C., Wei, J., Li, M., & Ji, H. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.10.038 · Cited by 42
Athwer, A., & Darwish, A. (2023) · Energies · doi:10.3390/en16145324 · Cited by 42
Enablers for Overcurrent Capability of Silicon-Carbide-Based Power Converters: An Overview
Bhadoria, S., Dijkhuizen, F., Raj, R., Wang, X., Xu, Q., Matioli, E., Kostov, K., & Nee, H. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3223730 · Cited by 42
Flow boiling of HFE-7100 for cooling Multi-Chip modules using manifold microchannels
Huang, X., Tang, W., Wu, Z., Wang, Y., Luo, L., & Sheng, K. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.124929 · Cited by 40
Chen, C., Suetake, A., Huo, F., Kim, D., Zhang, Z., Hsieh, M.-C., Li, W., Wakasugi, N., Takeshita, K., Yamaguchi, Y., et al. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3408798 · Cited by 38
Pressure Sensors Based on the Third-Generation Semiconductor Silicon Carbide: A Comprehensive Review
Fang, X., Wu, C., Tian, B., Zhao, L., Wei, X., & Jiang, Z. (2025) · Engineering · doi:10.1016/j.eng.2024.12.036 · Cited by 37
Review of Methodologies for Evaluating Short-Circuit Robustness and Reliability of SiC Power MOSFETs
Cui, R., Xin, Z., Liu, Q., Kang, J., Luo, H., Zhang, L., & Loh, P. C. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3136746 · Cited by 37
Han, G., Kim, J., Park, S., & Bae, W. (2025) · Electronics · doi:10.3390/electronics14214193 · Cited by 34
“DSC has been widely implemented in SiC MOSFET high-power modules and is considered essential for extending device lifetime under high thermal loads [26,41–44].”
InfluentialJohannesson, D., Nawaz, M. I., Norrga, S., Hallén, A., & Nee, H. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3027370 · Cited by 34
Reliability and Lifetime Prediction Model of Sintered Silver Under High-Temperature Cycling
Paret, P. P., Major, J. J., DeVoto, D. J., Narumanchi, S. V. J., Ding, C., & Lu, G. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3121195 · Cited by 34
Woldegiorgis, D., Hossain, M. M., Saadatizadeh, Z., Wei, Y., & Mantooth, H. A. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3219377 · Cited by 33
A Tutorial on High-Density Power Module Packaging
Chen, Y., Iradukunda, A.-C., Mantooth, H. A., Chen, Z., & Huitink, D. R. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3232691 · Cited by 33
Yuan, X., Yan, C., Huang, Y., Tang, Y. Z., Zhang, S., & Chen, G. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121927 · Cited by 32
Preventing Space Charge Accumulation by Incorporating Electrets
Saha, P. C., Faruqe, O., Haque, F., & Park, C. (2022) · Advanced Materials Interfaces · doi:10.1002/admi.202201046 · Cited by 32
Investigation of cooling capability of ceramic substrates for power electronics applications
Hlína, J., Řeboun, J., & Janda, M. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.123110 · Cited by 31
Tang, W., Huang, X., Chen, Z., Sheng, K., & Wu, Z. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3524214 · Cited by 31
Artificial Intelligence for Power Electronics in Electric Vehicles: Challenges and Opportunities
Paret, P. P., Finegan, D. P., & Narumanchi, S. V. J. (2022) · Journal of Electronic Packaging · doi:10.1115/1.4056306 · Cited by 31
Degradation Mechanism of Pressure-Assisted Sintered Silver by Thermal Shock Test
Wakamoto, K., Otsuka, T., Nakahara, K., & Namazu, T. (2021) · Energies · doi:10.3390/en14175532 · Cited by 30
Lin, Y. H., Zhang, Y., Liu, Y., Wu, K., Li, H., Wang, J., Li, K., & Ding, L. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3195177 · Cited by 28
High-Speed Dicing of SiC Wafers with 0.048 mm Diamond Blades via Rolling-Slitting
Feng, Y., Li, K., Dou, Z., Zhang, Z., & Guo, B. (2022) · Materials · doi:10.3390/ma15228083 · Cited by 28
Single-Phase Jet Impingement Cooling for a Power-Dense Silicon Carbide Power Module
Osman, A. H., Moreno, G., Myers, S., Narumanchi, S. V. J., & Joshi, Y. K. (2023) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2023.3276712 · Cited by 28
A Double-Sided Cooled Split-Phase SiC Power Module With Fuzz Button Interposer
Emon, A. I., Wu, Y., Li, Y., Mirza, A. B., Deng, S., & Luo, F. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3294932 · Cited by 28
Design and Numerical Simulation of Capacitive Pressure Sensor Based on Silicon Carbide
Zhou, Q., Liu, X., Luo, S., Jiang, X., Yang, D., & Yuan, W. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3329367 · Cited by 28
Lee, S., Choi, H., Park, P., Kang, S., Choi, K., & Lee, H. (2024) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2024.108050 · Cited by 28
Self-citationHigh-Temperature Characterizations of a Half-Bridge Wire-Bondless SiC MOSFET Module
Chen, Y., Lei, G., Lu, G., & Mei, Y. (2021) · IEEE Journal of the Electron Devices Society · doi:10.1109/jeds.2021.3119428 · Cited by 28
Li, B., Chen, Y., Wang, X., Li, Y., & Yan, Y. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115896 · Cited by 27
Haque, F., Faruqe, O., & Park, C. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3183282 · Cited by 27
Substrate Embedded Power Electronics Packaging for Silicon Carbide mosfets
Janabi, A., Shillaber, L., Ying, W., Mu, W., Hu, B., Jiang, Y., Iosifidis, N., Ran, L., & Long, T. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3396779 · Cited by 27
Tran, M. T., Tran, D.-D., Deepak, K., Martin, G. E., Bay, O., Baghdadi, M. E., & Hegazy, O. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3477743 · Cited by 28
Hu, D., Lu, J., Jin, Y., Li, H., & Yan, Q. (2024) · Wear · doi:10.1016/j.wear.2024.205590 · Cited by 26
Wang, X., Yang, Z., Wang, B., Chen, W., Zhang, G., Zhang, J., Fan, J., & Liu, P. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.07.098 · Cited by 26
Liu, B., Chen, C., Lv, J., Zhu, S., Yan, Y., Du, M., Liu, J., & Kang, Y. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3431589 · Cited by 25
Shen, X., Li, J., & Xi, S. (2022) · Nanomaterials · doi:10.3390/nano12193351 · Cited by 25
Chen, W., Jiang, J., Meda, A. H., Ibrahim, M. S., Zhang, G., & Fan, J. (2023) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2023.3263150 · Cited by 25
Quasi-direct Cu–Si3N4 bonding using multi-layered active metal deposition for power-module substrate
Tatsumi, H., Moon, S., Takahashi, M. K., Kozawa, T., Tsushima, E., & Nishikawa, H. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.112637 · Cited by 25
Ju, Y., Kim, T.-W., Lee, S.-H., Lee, H., Ahn, J., & Kim, H. (2025) · Nano Convergence · doi:10.1186/s40580-025-00503-3 · Cited by 24
Self-citationHeo, M.-H., Seo, Y.-J., & Yoon, J. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.105730 · Cited by 24
Sa, Z., Wang, S., Feng, J., Wen, J., Liu, X., & Tian, Y. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.09.189 · Cited by 24
The role of boron related defects in limiting charge carrier lifetime in 4H–SiC epitaxial layers
Ghezellou, M., Kumar, P., Bathen, M. E., Karsthof, R., Sveinbjörnsson, E. Ö., Großner, U., Bergman, J. P., Vines, L., & Ul‐Hassan, J. (2023) · APL Materials · doi:10.1063/5.0142415 · Cited by 23
Sun, W., Wang, L., Zhu, N., Xin, J., Luo, Y., Jiang, X., Fan, G., & Chen, M. (2023) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2023.107517 · Cited by 23
Zhong, L., Liu, W., Sun, Y., Wang, F., Chen, S., Sun, Q., Liu, Y., Yuan, C., Li, X., & Fei, G. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.112220 · Cited by 23
Opportunities and Challenges of Pressure Contact Packaging for Wide Bandgap Power Modules
Wang, L., Wang, W., Zeng, K., Deng, J., Rietveld, G., & Hueting, R. J. E. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3332050 · Cited by 23
Saha, J., Gorla, N. B. Y., & Panda, S. K. (2024) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2024.3362830 · Cited by 23
Xin, Z., Tang, W., Wu, Z., Wang, Y., Luo, L., & Sheng, K. (2024) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2024.109225 · Cited by 23
Investigation and On-Board Detection of Gate-Open Failure in SiC MOSFETs
Vankayalapati, B. T., Pu, S., Yang, F., Farhadi, M., Gurusamy, V., & Akin, B. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3125026 · Cited by 23
Metadata
- Authors
- Lee, H., Smet, V., & Tummala, R.
- Affiliations
- Georgia Institute of Technology (US)
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2020-03
- Volume
- 8
- Issue
- 1
- Pages
- 239-255
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W2986077237
- Cited by
- 526
- References
- 109
- Citations by year
- 2026: 75 · 2025: 133 · 2024: 97 · 2023: 87 · 2022: 65 · 2021: 51 · 2020: 18
- FWCI
- 12.04
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Journal of Emerging and Selected Topics in Power Electronics (publishedVersion)
- Funders
- Industry Consortium at the 3-D Systems Packaging Research Center
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electronic Packaging and Soldering Technologies
- Keywords
- silicon carbide power devices, power module packaging, high-speed switching, thermal management, high-temperature operation, high-voltage insulation, low-temperature packaging, aerospace applications
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.