A Review of SiC Power Module Packaging Technologies: Challenges, Advances, and Emerging Issues
The DOI matches its Crossref record; 103 of the 109 references it cites were found in a registry or an index.
Abstract
Power module packaging technologies have been experiencing extensive changes as the novel silicon carbide (SiC) power devices with superior performance become commercially available. This article presents an overview of power module packaging technologies in this transition, with an emphasis on the challenges that current standard packaging face, requirements that future power module packaging needs to fulfill, and recent advances on packaging technologies. The standard power module structure, which is a widely used current practice to package SiC devices, is reviewed, and the reasons why novel packaging technologies should be developed are described in this article. The packaging challenges associated with high-speed switching, thermal management, high-temperature operation, and high-voltage isolation are explained in detail. Recent advances on technologies, which try to address the limitations of standard packaging, both in packaging elements and package structure are summarized. The trend toward novel soft-switching power converters gave rise to problems regarding package designs of unconventional module configuration. Potential applications areas, such as aerospace applications, introduce low-temperature challenges to SiC packaging. Key issues in these emerging areas are highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Conventional wire bonding is often unsuitable for WBG devices, which switch rapidly [25-27].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“The constraints arise from three factors: substantial parasitic inductance, restricted vertical heat removal, and reduced reliability under thermomechanical stress-all of which degrade performance and lifetime [25-27,40].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“Conventional wire bonding, originally developed for Si devices, is a bottleneck that limits the attainable switching speed and power density of WBG packages.”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“DSC has been widely implemented in SiC MOSFET high-power modules and is considered essential for extending device lifetime under high thermal loads [26,41-44].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“The use of thermally conductive adhesive films (TCAFs) reduces interfacial thermal resistance.”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
4 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Review of Silicon Carbide Power Devices and Their Applications
She, X., Huang, A. Q., Lucia, O., & Ozpineci, B. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2652401 · Cited by 1,773
High-temperature electronics - a role for wide bandgap semiconductors?
Neudeck, P. G., Okojie, R. S., & Chen, L.-Y. (2002) · Proceedings of the IEEE · doi:10.1109/jproc.2002.1021571 · Cited by 1,050
The resonant DC link converter-a new concept in static power conversion
Divan, D. M. (1989) · IEEE Transactions on Industry Applications · doi:10.1109/28.25548 · Cited by 815
Oswald, N., Anthony, P., McNeill, N., & Stark, B. H. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2278919 · Cited by 504
A review of high-temperature electronics technology and applications
Watson, J., & Castro, G. (2015) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-015-3459-4 · Cited by 378
A Review on Die Attach Materials for SiC-Based High-Temperature Power Devices
Chin, H. S., Cheong, K. Y., & Ismail, A. B. (2010) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-010-9365-5 · Cited by 337
SiC power devices — Present status, applications and future perspective
Ostling, M., Ghandi, R., & Zetterling, C.-M. (2011) · 2011 IEEE 23rd International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2011.5890778 · Cited by 332
Resonant snubbers with auxiliary switches
McMurray, W. (1993) · IEEE Transactions on Industry Applications · doi:10.1109/28.216544 · Cited by 313
A Review of SiC Power Module Packaging: Layout, Material System and Integration
Huazhong University of Science and Technology, & Chen, C. (2017) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2017.00017 · Cited by 310
Chen, Z., Yao, Y., Boroyevich, D., Ngo, K. D. T., Mattavelli, P., & Rajashekara, K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2283245 · Cited by 277
Power Cycling Reliability of Power Module: A Survey
Durand, C., Klingler, M., Coutellier, D., & Naceur, H. (2016) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2016.2516044 · Cited by 239
Chen, Z., Boroyevich, D., & Burgos, R. (2010) · The 2010 International Power Electronics Conference - ECCE ASIA - · doi:10.1109/ipec.2010.5543851 · Cited by 236
A review of soft-switched DC-AC converters
Wu, T. S., Bellar, M. D., Tchamdjou, A., Mahdavi, J., & Ehsani, M. (2002) · IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting · doi:10.1109/ias.1996.560222 · Cited by 213
Overview of high voltage sic power semiconductor devices: development and application
Ji, S., Zhang, Z., & Wang, F. (2017) · CES Transactions on Electrical Machines and Systems · doi:10.23919/tems.2017.8086104 · Cited by 208
Zhang, H., & Tolbert, L. M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2048292 · Cited by 200
An overview of high-temperature electronic device technologies and potential applications
Dreike, P. L., Fleetwood, D. M., King, D. B., Sprauer, D. C., & Zipperian, T. E. (1994) · IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A · doi:10.1109/95.335047 · Cited by 192
Closed-Loop d${\bm i}/$d ${\bm t}$ and d ${\bm v}/$d${\bm t}$ IGBT Gate Driver
Lobsiger, Y., & Kolar, J. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2332811 · Cited by 190
Low temperature sinter technology die attachment for power electronic applications
Gobl, C., & Faltenbacher, J. (2010) · International Conference on Integrated Power Electronics Systems (CIPS) · Cited by 189
High-Temperature Operation of SiC Power Devices by Low-Temperature Sintered Silver Die-Attachment
Bai, J. G., Yin, J., Zhang, Z., Lu, G.-Q., & van Wyk, J. D. (2007) · IEEE Transactions on Advanced Packaging · doi:10.1109/tadvp.2007.898628 · Cited by 177
IGBT modules : technologies, driver and application
Volke, A. (2012) · Cited by 177
High frequency series resonant DC link power conversion
Murai, Y., & Lipo, T. A. (2003) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1988.25149 · Cited by 146
Silver-indium joints produced at low temperature for high temperature devices
Chuang, R. W., & Lee, C. C. (2002) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2002.801113 · Cited by 142
Power Electronic Modules: Design and Manufacture
Sheng, W. W., & Colino, R. P. (2004) · Thammasat University Digital Collections · Cited by 141
Review of Thermal Packaging Technologies for Automotive Power Electronics for Traction Purposes
Broughton, J., Smet, V., Tummala, R., & Joshi, Y. K. (2018) · Journal of Electronic Packaging · doi:10.1115/1.4040828 · Cited by 130
Self-citationA High-Temperature SiC Three-Phase AC–DC Converter Design for >$100 ^{\circ}$C Ambient Temperature
Wang, R., Boroyevich, D., Ning, P., Wang, Z., Wang, F. “., Mattavelli, P., Ngo, K. D. T., & Rajashekara, K. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2199131 · Cited by 126
Low temperature sinter technology die attachment for power electronic applications
Göbl, & Faltenbacher (2010) · Cited by 126
Common-Mode Voltage Reduction Methods for Current-Source Converters in Medium-Voltage Drives
Zhu, N., Xu, D. D., Wu, B., Zargari, N. R., Kazerani, M., & Liu, F. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2201174 · Cited by 122
Resonant snubbers with auxiliary switches
McMurray, W. (2003) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1989.96608 · Cited by 117
Sheng, W. W., & Colino, R. P. (2004) · CRC Press eBooks · doi:10.1201/9780203507308 · Cited by 116
Resonant snubber-based soft-switching inverters for electric propulsion drives
Lai, J. (1997) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.557501 · Cited by 115
Chen, C., Chen, Y., Li, Y., Huang, Z., Liu, T., & Kang, Y. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2723873 · Cited by 115
Wang, Z., Shi, X., Tolbert, L. M., Wang, F., Liang, Z., Costinett, D. J., & Blalock, B. J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2321174 · Cited by 112
A Solution to Press-Pack Packaging of SiC MOSFETS
Zhu, N., Mantooth, H. A., Xu, D., Chen, M., & Glover, M. D. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2686365 · Cited by 112
A frequency-domain study on the effect of DC-link decoupling capacitors
Chen, Z., Boroyevich, D., Mattavelli, P., & Ngo, K. D. T. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6646938 · Cited by 110
Evaluation of Encapsulation Materials for High-Temperature Power Device Packaging
Locatelli, M., Khazaka, R., Diaham, S., Pham, C.-D., Bechara, M., Dinculescu, S., & Bidan, P. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2279997 · Cited by 107
An overview to integrated power module design for high power electronics packaging
Lostetter, A. B., Barlow, F., & Elshabini, A. (2000) · Microelectronics Reliability · doi:10.1016/s0026-2714(99)00219-x · Cited by 103
A Novel High-Temperature Planar Package for SiC Multichip Phase-Leg Power Module
Ning, P., Lei, T. G., Wang, F., Lu, G., Ngo, K. D. T., & Rajashekara, K. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2046498 · Cited by 103
Zhao, S., Zhao, X., Dearien, A., Wu, Y., Zhao, Y., & Mantooth, H. A. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2922824 · Cited by 102
Au–Sn bonding material for the assembly of power integrated circuit module
Zhu, Z. X., Li, C. C., Liao, L. L., Liu, C. K., & Kao, C. R. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.02.065 · Cited by 101
Seal, S., & Mantooth, H. A. (2017) · Energies · doi:10.3390/en10030341 · Cited by 101
Reliability of high temperature solder alternatives
McCluskey, F. P., Dash, M., Wang, Z., & Huff, D. N. (2006) · Microelectronics Reliability · doi:10.1016/j.microrel.2006.07.090 · Cited by 91
Power electronics system integration for electric and hybrid vehicles
März, M., Schletz, A., Eckardt, B., Engelkraut, S., & Rauh, H. (2010) · Fraunhofer-Publica (Fraunhofer-Gesellschaft) · doi:10.24406/publica-fhg-367777 · Cited by 90
Planar Interconnect Technology for Power Module System Integration
Weidner, K., Kaspar, M., & Seliger, N. (2012) · Cited by 88
High frequency, low cost, power packaging using thin film power overlay technology
Fisher, R., Fillion, R. A., Burgess, J., & Hennessy, W. (1995) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.1995.468955 · Cited by 88
3-D Wire Bondless Switching Cell Using Flip-Chip-Bonded Silicon Carbide Power Devices
Seal, S., Glover, M. D., & Mantooth, H. A. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2782226 · Cited by 81
On Dynamic Effects Influencing IGBT Losses in Soft-Switching Converters
Ranstad, P., & Nee, H. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2055581 · Cited by 76
A Novel Decoupled Interconnecting Method for Current-Source Converter-Based Offshore Wind Farms
Popat, M., Wu, B., & Zargari, N. R. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2191982 · Cited by 75
Design of a low parasitic inductance SiC power module with double-sided cooling
Yang, F., Liang, Z., Wang, Z., & Wang, F. (2017) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2017.7931132 · Cited by 74
A 50 kVA Three-Phase Solid State Transformer Based on the Minimal Topology: Dyna-C
Chen, H., Prasai, A., Moghe, R., Chintakrinda, K., & Divan, D. M. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2518641 · Cited by 73
Thermal analysis of high-power modules
Godbold, C. V., Sankaran, V. A., & Hudgins, J. L. (1997) · IEEE Transactions on Power Electronics · doi:10.1109/63.554164 · Cited by 72
Characterization of Encapsulants for High-Voltage High-Temperature Power Electronic Packaging
Yao, Y., Chen, Z., Lu, G., Boroyevich, D., & Ngo, K. D. T. (2012) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2011.2173344 · Cited by 71
A Bus-Bar-Like Power Module Based on Three-Dimensional Power-Chip-on-Chip Hybrid Integration
Vagnon, É., Jeannin, P., Crébier, J.-C., & Avenas, Y. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2057401 · Cited by 67
Performance comparison of SiC Schottky diodes and silicon ultra fast recovery diodes
Adamowicz, M., Giziewski, S., Pietryka, J., & Krzemiński, Z. (2011) · IEEE International Conference on Compatibility, Power Electronics and Power Engineering · doi:10.1109/cpe.2011.5942222 · Cited by 65
High Temperature Interconnect and Die Attach Technology: Au–Sn SLID Bonding
Tollefsen, T. A., Larsson, A., Løvvik, O. M., & Aasmundtveit, K. E. (2013) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2013.2253353 · Cited by 63
Evaluation of soft switching for EV and HEV motor drives
Ehsani, M., Rahman, K. M., Bellar, M. D., & Severinsky, A. (2001) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.904559 · Cited by 60
PCB Embedded Semiconductors for Low-Voltage Power Electronic Applications
Kearney, D. J., Kicin, S., Bianda, E., & Krivda, A. (2017) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2017.2651646 · Cited by 60
Reduction of parasitic capacitance in 10 kV SiC MOSFET power modules using 3D FEM
Jørgensen, A. B., Christensen, N. H., Dalal, D. N., Sonderskov, S. D., Bęczkowski, S., Uhrenfeldt, C., & Munk‐Nielsen, S. (2017) · European Conference on Power Electronics and Applications · doi:10.23919/epe17ecceeurope.2017.8098962 · Cited by 60
Li, S., Tolbert, L. M., Wang, F., & Peng, F. Z. (2011) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2011.5744623 · Cited by 59
PLASTIC-STRAIN OF ALUMINIUM INTERCONNECTIONS DURING PULSED OPERATION OF IGBT MULTICHIP MODULES
Ciappa, M., & Malberti, P. (1996) · Quality and Reliability Engineering International · doi:10.1002/(sici)1099-1638(199607)12:4<297::aid-qre21>3.0.co;2-c · Cited by 58
Reliability of Planar SKiN Interconnect Technology
Scheuermann, U. (2012) · Cited by 54
6-in-1 Silicon carbide power module for high performance of power electronics systems
Ishino, H., Watanabe, T., Sugiura, K., & Tsuruta, K. (2014) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2014.6856072 · Cited by 54
High-frequency series-resonant DC link power conversion
Murai, Y., & Lipo, T. A. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.175278 · Cited by 54
Trends in automotive power semiconductor packaging
Dietrich, P. (2013) · Microelectronics Reliability · doi:10.1016/j.microrel.2013.07.088 · Cited by 52
Properties of Direct Aluminum Bonded Substrates for Power Semiconductor Components
Lindemann, A., & Strauch, G. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.889898 · Cited by 49
Power electronics system integration for electric and hybrid vehicles
März, Schletz, Eckardt, Egelkraut, & Rauh (2010) · International Conference on Integrated Power Electronics Systems (CIPS) · Cited by 48
Low inductance power module with blade connector
Stevanovic, L., Beaupre, R. A., Delgado, E., & Gowda, A. V. (2010) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2010.5433446 · Cited by 47
Silicon carbide power chip on chip module based on embedded die technology with paralleled dies
Regnat, G., Jeannin, P., Lefevre, G., Ewanchuk, J., Frey, D., Mollov, S. V., & Ferrieux, J.-P. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310353 · Cited by 43
Novel wire bond material for advanced power module packages
Schmidt, R., König, C., & Prenosil, P. (2012) · Microelectronics Reliability · doi:10.1016/j.microrel.2012.06.139 · Cited by 43
Zhao, X., Gao, B., Jiang, Y., Zhang, L., Wang, S., Xu, Y., Nishiguchi, K., Fukawa, Y., & Hopkins, D. C. (2017) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8096700 · Cited by 41
Yao, C., Wang, Z., Li, W., Li, H., Qian, J., Han, C., Luo, F. L., & Wang, J. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2801336 · Cited by 41
EVALUATION OF THE 2008 LEXUS LS 600H HYBRID SYNERGY DRIVE SYSTEM
Burress, T. A., Campbell, S. L., Coomer, C., Seiber, L. E., Marlino, L. D., Cunningham, J. P., Wereszczak, A. A., & Lin, H. (2009) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/951290 · Cited by 41
Packaging SiC power semiconductors — Challenges, technologies and strategies
Schuderer, J., Vemulapati, U., & Traub, F. (2014) · IEEE Workshop on Wide Bandgap Power Devices and Applications · doi:10.1109/wipda.2014.6964616 · Cited by 40
Common mode current mitigation for medium voltage half bridge SiC modules
Christensen, N. H., Jørgensen, A. B., Dalal, D. N., Sonderskov, S. D., Bęczkowski, S., Uhrenfeldt, C., & Munk‐Nielsen, S. (2017) · European Conference on Power Electronics and Applications · doi:10.23919/epe17ecceeurope.2017.8099202 · Cited by 40
Liang, Z. (2015) · IEEE International Workshop on Integrated Power Packaging (IWIPP) · doi:10.1109/iwipp.2015.7295992 · Cited by 36
A High-Temperature Gate Driver for Silicon Carbide mosfet
Nayak, P., Pramanick, S. K., & Rajashekara, K. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2745465 · Cited by 36
Nanocopper Based Solder-Free Electronic Assembly
Schnabl, K., Wentlent, L. A., Mootoo, K., Khasawneh, S., Zinn, A. A., Beddow, J., Hauptfleisch, E., Blass, D., & Børgesen, P. (2014) · Journal of Electronic Materials · doi:10.1007/s11664-014-3478-6 · Cited by 35
Ultra compact and high reliable SiC MOSFET power module with 200°C operating capability
Horio, M., Iizuka, Y., Ikeda, Y., Mochizuki, E., & Takahashi, Y. (2012) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2012.6229028 · Cited by 35
Anwar, M., Hayes, M., Tata, A., Teimorzadeh, M., & Achatz, T. (2015) · SAE International journal of alternative powertrains · doi:10.4271/2015-01-1201 · Cited by 33
Hussein, K. H., Ishihara, M., Miyamoto, N., Nakata, Y., Nakano, T., Donlon, J. F., & Motto, E. R. (2015) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2015.7104522 · Cited by 32
Wen, S. (1999) · VTechWorks (Virginia Tech) · Cited by 32
Neudeck, P. G., Spry, D. J., Krasowski, M. J., Prokop, N. F., & Chen, L. (2019) · Materials science forum · doi:10.4028/www.scientific.net/msf.963.813 · Cited by 30
Mohan, K., Shahane, N., Raj, P. M., Antoniou, A. M., Smet, V., & Tummala, R. (2017) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2017.7931137 · Cited by 29
Self-citationCharacterization of Nanosilver Dry Films for High-Temperature Applications
Khazaka, R., Thollin, B., Mendizabal, L., Henry, D., Khazaka, R., & Hanna, R. (2015) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2015.2402294 · Cited by 27
Development of a 15 kV bridge rectifier module using 4H-SiC junction-barrier schottky diodes
Tipton, C. W., Ibitayo, D., Urciuoli, D. P., & Ovrebo, G. K. (2011) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/tdei.2011.5976107 · Cited by 24
POL-kw Modules for High Power Applications
Yin, L., Nagarkar, K. R., Gowda, A. V., Kapusta, C., Tuominen, R., Gillespie, P. A., Sherman, D., Johnson, T., Hayashibe, S., Ito, H., et al. (2017) · IEEE Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc.2017.317 · Cited by 24
Soft-switching solid state transformer (S4T)
Chen, H., & Divan, D. M. (2016) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2016.7855455 · Cited by 23
Energy Impacts of Wide Band Gap Semiconductors in U.S. Light-Duty Electric Vehicle Fleet
Warren, J. A., Riddle, M. E., Graziano, D., Das, S., Upadhyayula, V. K. K., Masanet, E. R., & Cresko, J. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b01627 · Cited by 20
Copper ribbon bonding for power electronics applications
Marenco, N., Kontek, M., Reinert, W. H., Lingner, J., & Poech, M.-H. (2014) · Publikationsdatenbank der Fraunhofer-Gesellschaft (Fraunhofer-Gesellschaft) · Cited by 20
Current source inverter based cascaded solid state transformer for AC to DC power conversion
Roy, S., De, A., & Bhattacharya, S. (2014) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2014.6869656 · Cited by 19
Thick Printed Copper as Highly Reliable Substrate Technology for Power Electronics
Gundel, P., Bawohl, M., Challingsworth, M., Choisi, M., García, V., Gaul, M., Kersken, K., Modes, C., Nikolaidis, I., Persons, R., et al. (2015) · PCIM Europe: International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe) · Cited by 19
Mohan, K., Shahane, N., Sosa, R., Khan, S. A., Raj, P. M., Antoniou, A. M., Smet, V., & Tummala, R. (2018) · IEEE Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc.2018.00053 · Cited by 19
Self-citationDirect Beam Lead Bonding for Trench MOSFET & CSTBT
Narazaki, A. (2005) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2005.1487954 · Cited by 18
Body of Knowledge for Silicon Carbide Power Electronics
Boomer, K., Lauenstein, J., & Hammoud, A. (2016) · NASA Technical Reports Server (NASA) · Cited by 18
Design, Package, and Hardware Verification of a High-Voltage Current Switch
De, A., Morgan, A. J., Iyer, V. M., Ke, H., Zhao, X., Vechalapu, K., Bhattacharya, S., & Hopkins, D. C. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2727051 · Cited by 17
Packaging material issues in high temperature power electronics
Boettge, B., Naumann, F., Klengel, R., Klengel, S., & Petzold, M. (2013) · Publikationsdatenbank der Fraunhofer-Gesellschaft (Fraunhofer-Gesellschaft) · Cited by 17
Co-Designed High Voltage Module
Boteler, L. M., Miner, S. M., & Hinojosa, M. (2018) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm.2018.8419567 · Cited by 14
Lang, F., Yamaguchi, H., Nakagawa, H., & Sato, H. (2012) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept-hdp.2012.6474590 · Cited by 13
Soft switched capacitively coupled DC-AC converter for high power
Ehsani, M., & Wu, T.-W. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1993.298990 · Cited by 7
Terasaki, N., Nagatomo, Y., Nagase, T., & Kuromitsu, Y. (2014) · Cited by 7
New intelligent power module with silicon carbide diode
Lee, M.-S., Lee, J., Jin, B.-S., Lee, J.-B., Chung, D.-W., & Frank, W. (2011) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.1109/icpe.2011.5944658 · Cited by 6
Advanced packaging technologies for fully exploiting attributes of WBG power electronics
Liang, Z. (2015) · IEEE International Workshop on Integrated Power Packaging (IWIPP) · doi:10.1109/iwipp.2015.7295970 · Cited by 5
De, A., & Bhattacharya, S. (2015) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2015.7310369 · Cited by 5
Silicon nitride substrate technology for extreme environment electronics packaging
Johnson, W. J., & Savrun, E. (2012) · IEEE Aerospace Conference (AERO) · doi:10.1109/aero.2012.6187249 · Cited by 2
Research works printed but not linked: 21
- 2014, Design Considerations for High Power Module (HPM)
- sandwell, 2018, Electrically Induced Bearing Damage (EIBD) Aka Shaft Currents Aka Electrical Discharge Machining (EDM)
- guth, 2010, New assembly and interconnects beyond sintering methods, Proc Power Convers Intell Motion, 232
- choi, 2017, Overview of Silicon power Devices Fairchild Semiconductors
- 2019, Electric Power Monthly With Data for November 2018
- 2012, Unleashing Growth in Wide Bandgap The Upcoming Disruptions in Power Electronics GSA Semiconductor Leaders Forum Taiwan
- graotxapartegi, 2018, Status of power electronic industry: Market and technology trends, Proc Appl Power Electron Conf Expo
- schoser, 2015, Highly Reliable Transfer-Molded Power Modules
- johnson, 2007, Electronics packaging for extreme environments, Proc Int Planet Probe Workshop, 1
- 2017, Double Side Cooled Module FF400R07A01E3 S6 Data Sheet
- ostmann, 2016, Evolution and future of embedding technology, Proc Int Microelectron Assem Packag Soc, 1
- 2015, Quadrennial Technology Review 2015 Innovating Clean Energy Technologies in Advanced Manufacturing
- lostetter, 1998, Integrated power modules (IPMs), a novel MCM approach to high power electronics design and packaging, Int J Microcircuits Electron Packag, 21, 274
- 2014, DBA (Direct Bonded Aluminum) Substrate
- 2016, Curamik CERAMIC SUBSTRATES-TECHNICAL DATA SHEET
- 2015, Mitsubishi Electric to Release Sample J1-Series Power Modules
- 2012, Products for Electric and Hybrid Vehicles
- 2015, PCBs—Products and Solutions Schweizer Electronic
- 2016, NCAB group seminars—IMS
- casady, 2013, SiC power devices and modules maturing rapidly, Power Electron Eur, 1, 16
- 2016, Trends and Developments
Cited by
Reliability of Power Electronic Systems for EV/HEV Applications
Blaabjerg, F., Wang, H., Vernica, I., Liu, B., & Davari, P. (2021) · Proceedings of the IEEE · doi:10.1109/jproc.2020.3031041 · Cited by 249
“6 shows the respective advances in packaging elements for interconnection, substrate, and die attach of power modules, as presented in [18].”
BackgroundInfluentialPower Electronics Reliability: State of the Art and Outlook
Wang, H., & Blaabjerg, F. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3037161 · Cited by 218
Catalán, P., Wang, Y., Arza, J., & Chen, Z. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3234221 · Cited by 197
Qin, Y., Albano, B., Spencer, J., Lundh, J. S., Wang, B., Buttay, C., Tadjer, M., DiMarino, C., & Zhang, Y. (2023) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/acb4ff · Cited by 195
Shi, B., Ramones, A. I., Liu, Y., Wang, H., Li, Y., Pischinger, S., & Andert, J. (2023) · IET Power Electronics · doi:10.1049/pel2.12524 · Cited by 184
Metadata
- Authors
- Lee, H., Smet, V., & Tummala, R.
- Affiliations
- Georgia Institute of Technology (US)
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2020-03
- Volume
- 8
- Issue
- 1
- Pages
- 239-255
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W2986077237
- Cited by
- 526
- References
- 109
- Citations by year
- 2026: 75 · 2025: 133 · 2024: 97 · 2023: 87 · 2022: 65 · 2021: 51 · 2020: 18
- FWCI
- 12.04
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Journal of Emerging and Selected Topics in Power Electronics (publishedVersion)
- Funders
- Industry Consortium at the 3-D Systems Packaging Research Center
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electronic Packaging and Soldering Technologies
- Keywords
- silicon carbide power devices, power module packaging, high-speed switching, thermal management, high-temperature operation, high-voltage insulation, low-temperature packaging, aerospace applications
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.