A Review of SiC Power Module Packaging Technologies: Challenges, Advances, and Emerging Issues
The DOI matches its Crossref record; 103 of the 109 references it cites were found in a registry or an index.
Abstract
Power module packaging technologies have been experiencing extensive changes as the novel silicon carbide (SiC) power devices with superior performance become commercially available. This article presents an overview of power module packaging technologies in this transition, with an emphasis on the challenges that current standard packaging face, requirements that future power module packaging needs to fulfill, and recent advances on packaging technologies. The standard power module structure, which is a widely used current practice to package SiC devices, is reviewed, and the reasons why novel packaging technologies should be developed are described in this article. The packaging challenges associated with high-speed switching, thermal management, high-temperature operation, and high-voltage isolation are explained in detail. Recent advances on technologies, which try to address the limitations of standard packaging, both in packaging elements and package structure are summarized. The trend toward novel soft-switching power converters gave rise to problems regarding package designs of unconventional module configuration. Potential applications areas, such as aerospace applications, introduce low-temperature challenges to SiC packaging. Key issues in these emerging areas are highlighted.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Conventional wire bonding is often unsuitable for WBG devices, which switch rapidly [25-27].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“The constraints arise from three factors: substantial parasitic inductance, restricted vertical heat removal, and reduced reliability under thermomechanical stress-all of which degrade performance and lifetime [25-27,40].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“Conventional wire bonding, originally developed for Si devices, is a bottleneck that limits the attainable switching speed and power density of WBG packages.”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“DSC has been widely implemented in SiC MOSFET high-power modules and is considered essential for extending device lifetime under high thermal loads [26,41-44].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
In the citing paper
“The use of thermally conductive adhesive films (TCAFs) reduces interfacial thermal resistance.”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [26]
4 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Review of Silicon Carbide Power Devices and Their Applications
She, X., Huang, A. Q., Lucia, O., & Ozpineci, B. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2652401 · Cited by 1,773 · cited 5×
“manufacturing processes need to be improved to make the cost of SiC devices more justifiable [5], [11].”
BackgroundInfluentialHigh-temperature electronics - a role for wide bandgap semiconductors?
Neudeck, P. G., Okojie, R. S., & Chen, L.-Y. (2002) · Proceedings of the IEEE · doi:10.1109/jproc.2002.1021571 · Cited by 1,050
The resonant DC link converter-a new concept in static power conversion
Divan, D. M. (1989) · IEEE Transactions on Industry Applications · doi:10.1109/28.25548 · Cited by 815
Oswald, N., Anthony, P., McNeill, N., & Stark, B. H. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2278919 · Cited by 504
A review of high-temperature electronics technology and applications
Watson, J., & Castro, G. (2015) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-015-3459-4 · Cited by 378
A Review on Die Attach Materials for SiC-Based High-Temperature Power Devices
Chin, H. S., Cheong, K. Y., & Ismail, A. B. (2010) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-010-9365-5 · Cited by 337
SiC power devices — Present status, applications and future perspective
Ostling, M., Ghandi, R., & Zetterling, C.-M. (2011) · 2011 IEEE 23rd International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2011.5890778 · Cited by 332
Resonant snubbers with auxiliary switches
McMurray, W. (1993) · IEEE Transactions on Industry Applications · doi:10.1109/28.216544 · Cited by 313
A Review of SiC Power Module Packaging: Layout, Material System and Integration
Huazhong University of Science and Technology, & Chen, C. (2017) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2017.00017 · Cited by 310
Chen, Z., Yao, Y., Boroyevich, D., Ngo, K. D. T., Mattavelli, P., & Rajashekara, K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2283245 · Cited by 277
Research works printed but not linked: 21
- 2014, Design Considerations for High Power Module (HPM)
- sandwell, 2018, Electrically Induced Bearing Damage (EIBD) Aka Shaft Currents Aka Electrical Discharge Machining (EDM)
- guth, 2010, New assembly and interconnects beyond sintering methods, Proc Power Convers Intell Motion, 232
- choi, 2017, Overview of Silicon power Devices Fairchild Semiconductors
- 2019, Electric Power Monthly With Data for November 2018
- 2012, Unleashing Growth in Wide Bandgap The Upcoming Disruptions in Power Electronics GSA Semiconductor Leaders Forum Taiwan
- graotxapartegi, 2018, Status of power electronic industry: Market and technology trends, Proc Appl Power Electron Conf Expo
- schoser, 2015, Highly Reliable Transfer-Molded Power Modules
- johnson, 2007, Electronics packaging for extreme environments, Proc Int Planet Probe Workshop, 1
- 2017, Double Side Cooled Module FF400R07A01E3 S6 Data Sheet
- ostmann, 2016, Evolution and future of embedding technology, Proc Int Microelectron Assem Packag Soc, 1
- 2015, Quadrennial Technology Review 2015 Innovating Clean Energy Technologies in Advanced Manufacturing
- lostetter, 1998, Integrated power modules (IPMs), a novel MCM approach to high power electronics design and packaging, Int J Microcircuits Electron Packag, 21, 274
- 2014, DBA (Direct Bonded Aluminum) Substrate
- 2016, Curamik CERAMIC SUBSTRATES-TECHNICAL DATA SHEET
- 2015, Mitsubishi Electric to Release Sample J1-Series Power Modules
- 2012, Products for Electric and Hybrid Vehicles
- 2015, PCBs—Products and Solutions Schweizer Electronic
- 2016, NCAB group seminars—IMS
- casady, 2013, SiC power devices and modules maturing rapidly, Power Electron Eur, 1, 16
- 2016, Trends and Developments
Cited by
Items 501–561 of 561
車載インバータ向け流動制御型シェブロンフィンによるサブクール沸騰冷却性能向上に関する研究
吉村, 仁. (2025) · Institutional Repositories DataBase (IRDB)
Zhang, D., Fan, T., Ning, P., Li, Q., Tai, X., Kang, Y., Li, Y., Sun, C., Li, H., Zheng, D., et al. (2026) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2026.3680132
Onduleur de Courant Multiniveaux Moyenne Tension pour Applications Photovoltaïques
Gomez, L. A. (2023) · theses.fr (ABES) · doi:10.70675/501b40a1zb344z420cz8a48z9562d0c5d4d2
Harajli, Z. (2022) · theses.fr (ABES) · doi:10.70675/d10c0bc3z2843z469fz8158z1b5ee18e16d7
Du, R., Deng, Z., Zou, G., Wei, Y., Wang, S., Huo, J., Jia, Q., Zhang, H., Wu, A., & Liu, L. (2026) · Applied Surface Science · doi:10.1016/j.apsusc.2026.166834
Improvement of the interconnect of power devices by copper nanowires for PCB integration
Mendes, C. C. C. (2024) · theses.fr (ABES) · doi:10.70675/6d6320aaz07a7z4b65z96b2z4e576b94e6f6
Tang, T., Luo, Z., Fang, X., Li, Z., Peng, S., Yu, P., & Zhang, B. (2026) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2026.110935
Dynamic Current-Sharing Model for Multichip Parallel MOSFETs with Common-Source Structure
Yang, X., Zheng, H., ZHU, J., Wang, M., & Lei, Y. (2026) · Chinese Journal of Electrical Engineering · doi:10.23919/cjee.2025.000159
High-Density Packaging Structure Optimization with Embedded Gate Driver for 3.3 kV SiC MOSFETs
Chen, Y., Du, L., Du, X., & Mantooth, A. (2026) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec51134.2026.11516918
Protection circuit design for AC solid-state circuit breakers under inductive load conditions
Zheng, H., Zhu, J., He, S., & Yang, X. (2026) · Journal of Power Electronics · doi:10.1007/s43236-026-01338-9
Reliability study of large-area sintered Cu for power electronic packaging
Xie, Y., Huang, J., Yang, D., Cai, M., Qin, H., & Zhi, L. (2026) · Soldering and Surface Mount Technology · doi:10.1108/ssmt-03-2026-0020
A New Expansion Trench Design for Enhanced Thermal Fatigue Life of Packaged SiC Power Devices
(72451), Z. W., Tan, S., Xiong, H., & Wang, J. (2026) · Lecture notes in electrical engineering · doi:10.1007/978-981-92-0627-8_41
Mouri, Z. F., Shagor, M. R. K., & Haque, F. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6910105
Reliability Consideration on Interconnection Structure of the DSC power module
Zhang, C., Chen, C., Liu, B., Lv, J., Liu, J., & Kang, Y. (2026) · IEEE International Electrical and Energy Conference (CIEEC) · doi:10.1109/cieec69682.2026.11572620
Liu, R. C., Wang, X., Chen, D., Tian, B., Guan, Q., & Mou, Y. (2026) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2026.115534
Amano, S., Tsubakihara, M., Kawata, R., Sasabe, S., & Hayashi, S. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7073042
Insulation packaging design and verification for a compact 6.5 kV single-chip SiC MOSFET package
Li, W., Wang, Z., Li, X., Li, H., Liu, D., Zhang, W., Yu, L., Zhao, Z., Zhang, X., & Jin, R. (2026) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2026.110934
Li, C., Lin, T., Guo, X., Wang, R., Chen, Y., & Zhou, S. (2026) · Sensors · doi:10.3390/s26144336
Design and Thermal Optimization of a PCB-Embedded SiC Half-Bridge Power Module
Wang, S., Chen, W., Peng, Z., Lian, S., Jingye, S. H. E. N., Sun, T., Wang, J., & Yang, X. (2026) · IEEE International Conference on DC Microgrids · doi:10.1109/icdcm67837.2026.11594514
Kim, Y., Kim, B., Park, J., Han, K. J., Han, T., & Kim, D. (2026) · Materials Characterization · doi:10.1016/j.matchar.2026.116784
Zhang, L., Zintak, Z., Sun, P., Gardner, J. R., & Lu, G. (2026) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec-nagasaki2026-ec64663.2026.11596865
Design of a Full-Bridge Power Module for a Dual Active Bridge Converter
Fu, W., Li, X., Chen, Y., Du, L., Majakoti, S., Mantooth, A., Huitink, D. R., & Underwood, D. (2026) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec-nagasaki2026-ec64663.2026.11596731
Feng, M., Zhao, C., Li, W., Lv, X., Cui, Z., Guo, J., & Hao, M. (2026) · Gels · doi:10.3390/gels12070644
Zhang, S., Kan, J., Wang, Z., Wang, X., Wu, W., Zhang, C., Zhang, T., & Chi, Q. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.6c01904
Effect of the coil position on SiC single crystal growth during TSSG in a Si–Cr–C melt system
Yuan, M., Yang, H., Li, T., Zhang, G., Lv, G., H, W., & Ren, Y. (2026) · CrystEngComm · doi:10.1039/d6ce00040a
Soldering characteristics of active metal brazing ceramic substrates with various surface finishes
Jang, E., Park, J.-Y., Noh, E.-C., Oh, C., & Yoon, J. (2026) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2026.07.274
Zhang, X., Zhang, T., Yin, C., Zhang, C., & Chi, Q. (2026) · Journal of Materials Chemistry A · doi:10.1039/d6ta05113h
Vedernikov, D. A., Андреевич, Ж. М., Volkhin, D., & Вавилов, О. А. (2026) · International Siberian workshops and tutorials on electron devices and materials · doi:10.1109/edm69524.2026.11631951
Gong, H., Liu, B., Yang, S., & Yao, Y. (2026) · Microelectronics Reliability · doi:10.1016/j.microrel.2026.116269
Sun, A., 刘苗青, Huo, F., Zhang, P., Duan, L., Guo, J., Chen, C., Suganuma, K., & Sun, A. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.190594
Yuan, X., Zhang, Y., Li, G., Zhang, S., Tang, Y., & Liang, Y. (2026) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2026.111286
Huang, Y., Wang, D., Li, Q., & Pan, Z. (2026) · Micromachines · doi:10.3390/mi17091039
Kadowaki, K., Kawahara, F., & Shibata, K. (2026) · IEEJ Transactions on Fundamentals and Materials · doi:10.1541/ieejfms.146.344
Source-feedback and thermal-uniformity co-design of a multi-chip SiC MOSFET module
车黎明, Yang, S., Li, C., Liao, S., Mao, Y., & Lei, G. (2026) · Results in Engineering · doi:10.1016/j.rineng.2026.113856
Deep Trap Induction and Space Charge Suppression in Glycerol-Modified Silicone Gel at DC Stress
Zhang, X., Lv, Z., Wu, C., & Wu, K. (2026) · IEEE International Conference on Dielectrics (ICD) · doi:10.1109/icd64907.2026.11664998
Hayashi, S. (2022) · Institutional Repositories DataBase (IRDB)
Wang, X. Y., Li, W. H., Wang, D. W., Yu, C. H., & Zhao, W. S. (2026) · International Conference on Microwave and Millimeter Wave Technology (ICMMT) · doi:10.1109/icmmt69626.2026.11678323
Application of Porous Copper-Based Interconnect Materials in Electronic Packaging: A Brief Review
Liu, J., Qiu, L., Wang, P., Wang, F., Huang, J., Chen, H., Zhao, H., & Chen, F. (2026) · Materials · doi:10.3390/ma19183937
Rapid Low-temperature Sintering of Cu Microparticles with PEG via a Pre-Drying Process
Jiang, W., Yin, D., Yu, Z., Ouyang, Y., Yan, H., & He, S. (2026) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept71373.2026.11689911
Warpage Analysis of Embedded Power Modules Based on Thermal-Mechanical Coupling
Zhang, J., Liang, Y., Wang, Y., Li, J., & Yang, D. (2026) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept71373.2026.11690310
Liu, R., Wang, X., Cao, Y., Chen, S., Huang, Y., & Mou, Y. (2026) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept71373.2026.11689977
Huang, Y., Chen, S., Wang, X., Cao, Y., Liu, R., Mou, Y., & Liang, R. (2026) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept71373.2026.11690130
Wang, A., Wang, X., Lu, D., Zhou, P., Zhu, Y., & Ji, H. (2026) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept71373.2026.11689952
Parallel Multilevel Current Source Inverter for LV/MV PV Conversion
Gomez, L.-A., Gateau, G., Sanchez, S., & Bier, A. (2026) · Energies · doi:10.3390/en19194501
Analysis of Multistage DC/AC converter based on Pulsating DC link principle
Marciano, D. (2022) · Archivio Istituzionale della Ricerca - Università degli Studi di Cassino
黄若谷, Duan, X., & Zhong, Z. (2026) · Lecture notes in electrical engineering · doi:10.1007/978-981-95-9442-9_3
Shahir, F. M., Khoshsaadat, A., & Afjei, E. S. (2026) · IEEE Access · doi:10.1109/access.2026.3739905
Thermal-Mechanical Analysis of a Single-Double-Hybrid Liquid Cooling for SiC Power Modules
Peng, Y., Chen, H., Yu, H., Zhou, Y., Jiang, W., Liu, T., Li, L., & Zhu, G. (2026) · International Conference on Energy, Power and Electrical Technology (ICEPET) · doi:10.1109/icepet70032.2026.11725490
Hu, W., Jia, F., Qu, X., Zhu, F., Fei, X., Liu, J., Li, X., & Wei, W. (2026) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2026.106980
Chang, Y., Acosta, I. A., Zhang, K., Stathatos, A., Lee, J., & Li, C. (2026) · Chinese Journal of Electrical Engineering · doi:10.23919/cjee.2026.000118
Kadowaki, K., Kawahara, F., & Shibata, K. (2026) · Electrical Engineering in Japan · doi:10.1002/eej.70051
Yari, K., Mehrabi, A., Poelma, R. H., Du, S., van Driel, W., & Zhang, G. (2026) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2026.3747467
Li, S., Zhang, C., Wang, W., Zhu, Y., & Yang, L. (2026) · High Voltage · doi:10.1049/hve2.70255
Du, L., Du, T., & Chen, C. (2026) · Journal of Applied Physics · doi:10.1063/5.0353762
Cho, S. Y., Shin, J.-H., Kim, M.-S., Kim, H., Kim, K.-S., & Hyun, S. (2026) · Journal of Welding and Joining · doi:10.5781/jwj.2026.44.5.7
Modeling of SiC module integrated with vapor chamber substrate considering gas-liquid properties
Zhu, Z., Donghai, Liang, R., Xuan, Z., Yang, Y., & Luo, H. (2026) · IEEE Workshop on Wide Bandgap Power Devices and Applications in Europe (WiPDA Europe) · doi:10.1109/wipdaeurope69886.2026.11747056
Jørgensen, J. S., & Fathollahi, A. (2026) · Applied Sciences · doi:10.3390/app162110892
Charge‐Trapping Multilayer Electrets for Partial Discharge Mitigated AlN Substrates
Washir, M. N., Juberi, A. M., & Park, C. (2026) · Advanced Materials Interfaces · doi:10.1002/admi.70724
Metadata
- Authors
- Lee, H., Smet, V., & Tummala, R.
- Affiliations
- Georgia Institute of Technology (US)
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2020-03
- Volume
- 8
- Issue
- 1
- Pages
- 239-255
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W2986077237
- Cited by
- 526
- References
- 109
- Citations by year
- 2026: 75 · 2025: 133 · 2024: 97 · 2023: 87 · 2022: 65 · 2021: 51 · 2020: 18
- FWCI
- 12.04
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Journal of Emerging and Selected Topics in Power Electronics (publishedVersion)
- Funders
- Industry Consortium at the 3-D Systems Packaging Research Center
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electronic Packaging and Soldering Technologies
- Keywords
- silicon carbide power devices, power module packaging, high-speed switching, thermal management, high-temperature operation, high-voltage insulation, low-temperature packaging, aerospace applications
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.