Failure and Reliability Analysis of a SiC Power Module Based on Stress Comparison to a Si Device
The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
The superior electro-thermal properties of silicon carbide (SiC) power devices permit higher temperature of operation and enable higher power density compared with silicon devices. Nevertheless, the reliability of SiC power modules has been identified as a major area of uncertainty in applications which require high reliability. Traditional power module packaging methods developed for silicon chips have been adopted for SiC and the different thermomechanical properties cause different fatigue stresses on the solder layer of the chip. In this paper, a 2-D finite element model has been developed to evaluate the stress performance and lifetime of the solder layer for Si devices, which has been validated using accelerated power cycling tests on Si IGBTs. The proposed model was extrapolated for SiC devices of the same voltage and current rating using the same solder material and the results show that under the same cyclic power loss profile the induced stress and strain energy in the die attach layer is much higher and concentrates on the die/solder interfacial area for SiC chips. Using the validated stress-based model, the lifetime can be quantified when SiC chips are used. This ability to extrapolate the available power cycling and lifetime data of silicon chips to SiC chips would be a key element for developing reliable packaging methods for SiC devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Selected failure mechanisms of modern power modules
Ciappa, M. (2002) · Microelectronics Reliability · doi:10.1016/s0026-2714(02)00042-2 · Cited by 1,039
Step-controlled epitaxial growth of SiC: High quality homoepitaxy
Matsunami, H., & Kimoto, T. (1997) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(97)00005-3 · Cited by 613
Solder joint fatigue models: review and applicability to chip scale packages
Lee, W. W., Nguyen, L. T., & Selvaduray, G. S. (2000) · Microelectronics Reliability · doi:10.1016/s0026-2714(99)00061-x · Cited by 523
A Lifetime Estimation Technique for Voltage Source Inverters
Huang, H., & Mawby, P. A. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2229472 · Cited by 394
Self-citationA New Degradation Mechanism in High-Voltage SiC Power MOSFETs
Agarwal, A., Fatima, H., Haney, S., & Ryu, S.-H. (2007) · IEEE Electron Device Letters · doi:10.1109/led.2007.897861 · Cited by 300
Busca, C., Teodorescu, R., Blaabjerg, F., Munk-Nielsen, S., Helle, L., Abeyasekera, T., & Rodriguez, P. (2011) · Microelectronics Reliability · doi:10.1016/j.microrel.2011.06.053 · Cited by 293
Reliability and performance limitations in SiC power devices
Singh, R. (2006) · Microelectronics Reliability · doi:10.1016/j.microrel.2005.10.013 · Cited by 284
Reliability Issues of SiC MOSFETs: A Technology for High-Temperature Environments
Yu, L. C., Dunne, G. T., Matocha, K. S., Cheung, K. P., Suehle, J. S., & Sheng, K. (2010) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2010.2077295 · Cited by 227 · cited 1×
“Step-controlled epitaxial growth and new trench structure can reduce the effect of material defects, thus the performance of the devices can be also improved [6], [7].”
BackgroundReliability Physics and Engineering: Time-To-Failure Modeling
McPherson, J. W. (2010) · Springer eBooks · doi:10.1007/978-1-4419-6348-2 · Cited by 220 · cited 1×
“When the heat source is considered for the thermal analysis, the differential equation for the temperature calculation of the element in each layer is given by [32]”
BackgroundBai, J. G., & Lu, G.-Q. (2006) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2006.882196 · Cited by 214
In Situ Diagnostics and Prognostics of Solder Fatigue in IGBT Modules for Electric Vehicle Drives
Ji, B., Song, X., Cao, W., Pickert, V., Hu, Y., Mackersie, J. W., & Pierce, G. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2318991 · Cited by 201
High-Temperature Operation of SiC Power Devices by Low-Temperature Sintered Silver Die-Attachment
Bai, J. G., Yin, J., Zhang, Z., Lu, G.-Q., & van Wyk, J. D. (2007) · IEEE Transactions on Advanced Packaging · doi:10.1109/tadvp.2007.898628 · Cited by 177
Ji, B., Song, X., Sciberras, E. A., Cao, W., Hu, Y., & Pickert, V. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2365531 · Cited by 160
Real-Time Aging Monitoring for IGBT Modules Using Case Temperature
Wang, Z., Tian, B., Qiao, W., & Qu, L. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2497665 · Cited by 150
Low Stress Cycle Effect in IGBT Power Module Die-Attach Lifetime Modeling
Lai, W., Chen, M., Ran, L., Alatise, O., Xu, S., & Mawby, P. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2501540 · Cited by 134
Self-citationPower cycling induced failure mechanisms in solder layers
Herrmann, T., Feller, M., Lutz, J., Bayerer, R., & Licht, T. (2007) · 2007 European Conference on Power Electronics and Applications · doi:10.1109/epe.2007.4417702 · Cited by 116
Fatigue Reliability Analysis of Sn–Ag–Cu Solder Joints Subject to Thermal Cycling
Che, F. X., & Pang, J. H. L. (2012) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2012.2195007 · Cited by 113 · cited 1×
“model is adopted to evaluate the stress [27].”
MethodNavarro, L. A., Perpiñà, X., Godignon, P., Montserrat, J., Banu, V., Vellvehi, M., & Jordà, X. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2279607 · Cited by 111 · cited 2×
“Experimental results from different samples reveal that the shear stress in a SiC die-attach is higher than that in a Si device [20], and strain energy density tends to concentrate at the chip edge where the difference is 1.”
BackgroundReliability of high temperature solder alternatives
McCluskey, F. P., Dash, M., Wang, Z., & Huff, D. N. (2006) · Microelectronics Reliability · doi:10.1016/j.microrel.2006.07.090 · Cited by 91
A Temperature Gradient-Based Potential Defects Identification Method for IGBT Module
Gao, B., Yang, F., Chen, M., Ran, L., Ullah, I., Xu, S., & Mawby, P. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2565701 · Cited by 89
Self-citationPower cycling capability of Modules with SiC-Diodes
Herold, C., Schaefer, M., Sauerland, F., Poller, T., Lutz, J., & Schilling, O. (2014) · Cited by 74
Otiaba, K. C., Okereke, M. I., & Bhatti, R. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.12.006 · Cited by 70
Schrock, J. A., Ray II, W. B., Lawson, K., Bilbao, A., Bayne, S. B., Holt, S. L., Cheng, L., Palmour, J. W., & Scozzie, C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2357013 · Cited by 43
Status and Trend of SiC Power Semiconductor Packaging
Wang, Y., Dai, X., Liu, G., Wu, Y., Li, D., & Jones, S. (2015) · International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept.2015.7236613 · Cited by 21
Reliability investigation of SiC bipolar device module in long time inverter operation
Tanaka, A., Ogata, S., Izumi, T., Nakayama, K., Hayashi, T., Miyanagi, Y., & Asano, K. (2012) · IEEE International Symposium on Power Semiconductor Devices and ICs/Proceedings of the International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs/Proceedings of the ... International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2012.6229066 · Cited by 11
Cited by
Overview of Real-Time Lifetime Prediction and Extension for SiC Power Converters
Ni, Z., Lyu, X., Yadav, O. P., Singh, B. N., Zheng, S., & Cao, D. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2962503 · Cited by 261
Power Electronics Reliability: State of the Art and Outlook
Wang, H., & Blaabjerg, F. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3037161 · Cited by 218
“SiC MOSFETs has been reported to be lower than IGBTs with the same current rating and package technology in [25] by testing and in [26] by simulation.”
MethodHu, B., Konaklieva, S., Kourra, N., Williams, M. A., Ran, L., & Lai, W. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2958737 · Cited by 46
Self-citationImpact of device aging in the compact electro-thermal modeling of SiC power MOSFETs
Ceccarelli, L., Bahman, A. S., & Iannuzzo, F. (2019) · Microelectronics Reliability · doi:10.1016/j.microrel.2019.06.028 · Cited by 26
Rahman, M. D., Hasan, A. S. M. K., Mantooth, H. A., & Song, X. (2024) · 2024 IEEE 11th Workshop on Wide Bandgap Power Devices & Applications (WiPDA) · doi:10.1109/wipda62103.2024.10773107 · Cited by 3
Metadata
- Authors
- Hu, B., Ortiz Gonzalez, J., Ran, L., Ren, H., Zeng, Z., Lai, W., Gao, B., Alatise, O., Lu, H., Bailey, C., & Mawby, P.
- Venue
- IEEE Transactions on Device and Materials Reliability
- Published
- 2017-12
- Volume
- 17
- Issue
- 4
- Pages
- 727-737
- ISSN
- 1530-4388 (ISSN-L)
- 1558-2574
- OpenAlex
- W2766418078
- Cited by
- 202
- References
- 25
- FWCI
- 6.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.