The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Integrated ${LCC} $ Compensation Topology for Wireless Charger in Electric and Plug-in Electric Vehicles
Abstract
This paper presents an integrated$LCC$compensation topology for electric vehicle/plug-in hybrid electric vehicle wireless chargers. The effect of the coupling between the additional coil and the main coil on the$LCC$compensation topology is studied. The proposed topology will reduce the size of the additional coil and make the system more compact with extremely high efficiency. The basic characteristics of the proposed topology are analyzed based on fundamental harmonic approximation. Furthermore, based on the steady-state model, three categories of operation modes are presented and analyzed. In order to realize zero-voltage switching, the series capacitor$C_{2} $on the secondary side is tuned. A numerical method is used to analyze the impact of different values of$\Delta C_{2}$on the turnoff current, and the best value of$C_{2}$is chosen to build a prototype to verify the analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2001) · Springer eBooks · doi:10.1007/b100747 · Cited by 6,112
Wireless Power Transfer via Strongly Coupled Magnetic Resonances
Kurs, A., Karalis, A., Moffatt, R., Joannopoulos, J. D., Fisher, P., & Soljačić, M. (2007) · Science · doi:10.1126/science.1143254 · Cited by 5,576
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
Sample, A. P., Meyer, D. A., & Smith, J. R. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2046002 · Cited by 1,808
Development of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging Systems
Budhia, M., Boys, J. T., Covic, G. A., & Huang, C.-Y. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2179274 · Cited by 1,273
Wang, C.-S., Covic, G. A., & Stielau, O. H. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.822038 · Cited by 1,213
A Double-Sided LCC Compensation Network and Its Tuning Method for Wireless Power Transfer
Li, S., Li, W., Deng, J., Nguyen, T. D., & Mi, C. C. (2015) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2014.2347006 · Cited by 1,091
Self-citationDesign and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems
Budhia, M., Covic, G. A., & Boys, J. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143730 · Cited by 1,039
RamRakhyani, A. K., Mirabbasi, S., & Chiao, M. (2011) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2010.2072782 · Cited by 945
A Bidirectional Inductive Power Interface for Electric Vehicles in V2G Systems
Madawala, U. K., & Thrimawithana, D. J. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2114312 · Cited by 813
Optimal Design of ICPT Systems Applied to Electric Vehicle Battery Charge
Sallan, J., Villa, J. L., Llombart, A., & Sanz, J. F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2015359 · Cited by 734
Khaligh, A., & Dusmez, S. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2213104 · Cited by 630
Optimal Design Methodlogy for LLC Resonant Converter
Lu, B., Liu, W., Liang, Y., Lee, F. C., & Van Wyk, J. D. (2006) · Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06. · doi:10.1109/apec.2006.1620590 · Cited by 621
A Frequency Control Method for Regulating Wireless Power to Implantable Devices
Si, P., Hu, A. P., Malpas, S., & Budgett, D. (2008) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2008.918284 · Cited by 582
A High Efficiency 5 kW Inductive Charger for EVs Using Dual Side Control
Wu, H. H., Gilchrist, A., Sealy, K. D., & Bronson, D. (2012) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2192283 · Cited by 512
Zhang, W., Wong, S.-C., Tse, C. K., & Chen, Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249112 · Cited by 505
A contactless electrical energy transmission system for portable-telephone battery chargers
Jang, Y., & Jovanovic, M. M. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.812472 · Cited by 484
High-Misalignment Tolerant Compensation Topology For ICPT Systems
Villa, J. L., Sallan, J., Sanz Osorio, J. F., & Llombart, A. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2161055 · Cited by 467
Circuit-Model-Based Analysis of a Wireless Energy-Transfer System via Coupled Magnetic Resonances
Cheon, S., Kim, Y.-H., Kang, S.-Y., Lee, M. L., Lee, J.-M., & Zyung, T. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2072893 · Cited by 395
A Unity-Power-Factor IPT Pickup for High-Power Applications
Keeling, N. A., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2027255 · Cited by 371
Circuit Model Based Analysis of a Wireless Energy Transfer System via Coupled Magnetic Resonances
Cheon, S.-H., Kim, Y.-H., Lee, M.-L., & Kang, S.-Y. (2011) · The Transactions of the Korean Institute of Power Electronics · doi:10.6113/tkpe.2011.16.2.137 · Cited by 337
Imura, T., Okabe, H., & Hori, Y. (2009) · 2009 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2009.5289747 · Cited by 312
A Study of Loosely Coupled Coils for Wireless Power Transfer
Chen, C.-J., Chu, T.-H., Lin, C.-L., & Jou, Z.-C. (2010) · IEEE Transactions on Circuits and Systems II: Express Briefs · doi:10.1109/tcsii.2010.2048403 · Cited by 306
Analysis and Design of an LCL-T Resonant Converter as a Constant-Current Power Supply
Borage, M., Tiwari, S., & Kotaiah, S. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.858729 · Cited by 271
A new IPT magnetic coupler for electric vehicle charging systems
Budhia, M., Covic, G., & Boys, J. (2010) · IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society · doi:10.1109/iecon.2010.5675350 · Cited by 268
Designing Efficient Inductive Power Links for Implantable Devices
Harrison, R. R. (2007) · 2007 IEEE International Symposium on Circuits and Systems (ISCAS) · doi:10.1109/iscas.2007.378508 · Cited by 244
Investigating an LCL Load Resonant Inverter for Inductive Power Transfer Applications
Wang, C.-S., Covic, G. A., & Stielau, O. H. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.830098 · Cited by 242
Inductive Powering: Basic Theory and Application to Biomedical Systems
Schuylenbergh, K. V., & Puers, R. (2009) · Medical Entomology and Zoology · Cited by 240
A Power–Frequency Controller for Bidirectional Inductive Power Transfer Systems
Madawala, U. K., Neath, M., & Thrimawithana, D. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2174537 · Cited by 232
A review on inductive charging for electric vehicles
Wu, H. H., Gilchrist, A., Sealy, K., Israelsen, P., & Muhs, J. (2011) · 2011 IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2011.5994820 · Cited by 231
A large air gap 3 kW wireless power transfer system for electric vehicles
Takanashi, H., Sato, Y., Kaneko, Y., Abe, S., & Yasuda, T. (2012) · 2012 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342813 · Cited by 183
Feasibility study on bipolar pads for efficient wireless power chargers
Nguyen, T.-D., Li, S., Li, W., & Mi, C. C. (2014) · 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014 · doi:10.1109/apec.2014.6803531 · Cited by 160
Self-citationFrequency Decrease Analysis of Resonant Wireless Power Transfer
Zhang, Y., Zhao, Z., & Chen, K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2277783 · Cited by 159
Cited by
Wireless Power Transfer—An Overview
Zhang, Z., Pang, H., Georgiadis, A., & Cecati, C. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835378 · Cited by 1,723
A Comprehensive Review of Wireless Charging Technologies for Electric Vehicles
Ahmad, A., Alam, M. S., & Chabaan, R. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2771619 · Cited by 993
Wireless Power Transfer for Vehicular Applications: Overview and Challenges
Patil, D., McDonough, M. K., Miller, J. M., Fahimi, B., & Balsara, P. T. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2780627 · Cited by 991
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
A review of wireless power transfer for electric vehicles: Prospects to enhance sustainable mobility
Bi, Z., Kan, T., Mi, C. C., Zhang, Y., Zhao, Z., & Keoleian, G. A. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.003 · Cited by 485
Self-citation
Metadata
- Authors
- Li, W., Zhao, H., Li, S., Deng, J., Kan, T., & Mi, C. C.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-07
- Volume
- 62
- Issue
- 7
- Pages
- 4215-4225
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2127897065
- Cited by
- 331
- References
- 33
- FWCI
- 9.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.