The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
Open accessAbstract
Modeling results for a lithium‐ion battery based on the couple are presented and compared to experimental data. Good agreement between simulation and experiment exists for several different experimental cell configurations on both charge and discharge. Simulations indicate that the battery in its present design is ohmically limited. Additional internal resistance in the cells, beyond that initially predicted by the model, could be described using either a contact resistance between cell layers or a film resistance on the negative electrode particles. Modest diffusion limitations in the carbon electrode arising at moderate discharge rates are used to fit the diffusion coefficient of lithium in the carbon electrode, giving . Cells with a 1 M (mol/dm 3 ) initial salt concentration become solution‐phase diffusion limited at high rates. The low‐rate specific energy calculated for the experimental cells ranges from 70 to 90 Wh/kg, with this mass based on the composite electrodes, electrolyte, separator, and current collectors. The peak specific power for a 30 s current pulse to a 2.8 V cutoff potential is predicted to fall from about 360 W/kg at the beginning of discharge to 100 W/kg at 80% depth of discharge for one particular experimental cell. Different system designs are explored using the mathematical model with the objective of a higher specific energy. Configurations optimized for a 6 h discharge time should obtain over 100 Wh/kg.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The role of diffusion in catalysis
Satterfield, C. N., & SHERWOOD, T. K. (1963) · Cited by 396
Chemical Reaction and Reactor Engineering
Carberry (1986) · Cited by 207
Cited by
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Arora, P., & Zhang, Z. (. (2004) · Chemical Reviews · doi:10.1021/cr020738u · Cited by 2,175
A review on lithium-ion battery ageing mechanisms and estimations for automotive applications
Barré, A., Deguilhem, B., Grolleau, S., Gérard, M., Suard, F., & Riu, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.040 · Cited by 1,758
Liu, H., Wei, Z., He, W., & Zhao, J. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.08.016 · Cited by 1,332
Jaguemont, J., Boulon, L., & Dubé, Y. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.034 · Cited by 1,188
Wang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
Critical Review on the Battery State of Charge Estimation Methods for Electric Vehicles
Xiong, R., Cao, J., Yu, Q., He, H., & Sun, F. (2018) · IEEE Access · doi:10.1109/access.2017.2780258 · Cited by 1,004
Transport Properties of LiPF[sub 6]-Based Li-Ion Battery Electrolytes
Valo̸en, L. O., & Reimers, J. N. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1872737 · Cited by 935
Numerical Simulation of Intercalation-Induced Stress in Li-Ion Battery Electrode Particles
Zhang, X., Shyy, W., & Marie Sastry, A. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2759840 · Cited by 893
Thick Electrode Batteries: Principles, Opportunities, and Challenges
Kuang, Y., Chen, C., Kirsch, D., & Hu, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901457 · Cited by 842
Development of First Principles Capacity Fade Model for Li-Ion Cells
Ramadass, P., Haran, B., Gomadam, P. M., White, R., & Popov, B. N. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1634273 · Cited by 794
Dynamic lithium-ion battery model for system simulation
Gao, L., Liu, S., & Dougal, R. A. (2002) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2002.803653 · Cited by 794
Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles
Smith, K., & Wang, C.-Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.01.038 · Cited by 763
Discharge Model for the Lithium Iron-Phosphate Electrode
Srinivasan, V., & Newman, J. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1785012 · Cited by 730
Self-citationLing, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
Yang, Y., Zheng, G., Misra, S., Nelson, J., Toney, M. F., & Cui, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3052206 · Cited by 718
Battery Energy Storage System (BESS) and Battery Management System (BMS) for Grid-Scale Applications
Lawder, M. T., Suthar, B., Northrop, P. W. C., De, S., Hoff, C. M., Leitermann, O., Crow, M. L., Santhanagopalan, S., & Subramanian, V. R. (2014) · Proceedings of the IEEE · doi:10.1109/jproc.2014.2317451 · Cited by 713
Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries
Billaud, J., Bouville, F., Magrini, T., Villevieille, C., & Studart, A. R. (2016) · Nature Energy · doi:10.1038/nenergy.2016.97 · Cited by 671
Li-Ion Cell Operation at Low Temperatures
Ji, Y., Zhang, Y., & Wang, C.-Y. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.047304jes · Cited by 640
Chen, C.-H., Brosa Planella, F., O’Regan, K., Gastol, D., Widanage, W. D., & Kendrick, E. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9050 · Cited by 610
Review of simplified Pseudo-two-Dimensional models of lithium-ion batteries
Jokar, A., Rajabloo, B., Désilets, M., & Lacroix, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.036 · Cited by 592
Quantifying tortuosity in porous Li-ion battery materials
Thorat, I. V., Stephenson, D. E., Zacharias, N. A., Zaghib, K., Harb, J. N., & Wheeler, D. R. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.032 · Cited by 571
Single-Particle Model for a Lithium-Ion Cell: Thermal Behavior
Guo, M., Sikha, G., & White, R. E. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3521314 · Cited by 567
Petzl, M., & Danzer, M. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.060 · Cited by 511
Zheng, Y., Ouyang, M., Han, X., Lu, L., & Li, J. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.094 · Cited by 490
Heating strategies for Li-ion batteries operated from subzero temperatures
Ji, Y., & Wang, C. Y. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.03.147 · Cited by 485
Cheng, Y.-T., & Verbrugge, M. W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.01.021 · Cited by 469
Seaman, A., Dao, T.-S., & McPhee, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.057 · Cited by 453
Mathematical modeling of the capacity fade of Li-ion cells
Ramadass, P., Haran, B., White, R., & Popov, B. N. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00531-7 · Cited by 446
Lai, X., Jin, C., Yi, W., Han, X., Feng, X., Zheng, Y., & Ouyang, M. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.026 · Cited by 438
Analysis of Electrochemical and Thermal Behavior of Li-Ion Cells
Srinivasan, V., & Wang, C. Y. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1526512 · Cited by 435
Direct in situ measurements of Li transport in Li-ion battery negative electrodes
Harris, S. J., Timmons, A., Baker, D. R., & Monroe, C. (2010) · Chemical Physics Letters · doi:10.1016/j.cplett.2009.12.033 · Cited by 434
A review on modeling of electro-chemo-mechanics in lithium-ion batteries
Zhao, Y., Stein, P., Bai, Y., Al-Siraj, M., Yang, Y., & Xu, B.-X. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.12.011 · Cited by 431
Online internal short circuit detection for a large format lithium ion battery
Feng, X., Weng, C., Ouyang, M., & Sun, J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.019 · Cited by 383
Thermal Model for a Li-Ion Cell
Kumaresan, K., Sikha, G., & White, R. E. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2817888 · Cited by 382
Efficient Macro-Micro Scale Coupled Modeling of Batteries
Subramanian, V. R., Diwakar, V. D., & Tapriyal, D. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.2032427 · Cited by 381
Yang, N., Zhang, X., Shang, B., & Li, G. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.079 · Cited by 378
Rechargeable Batteries of the Future—The State of the Art from a BATTERY 2030+ Perspective
Fichtner, M., Edström, K., Ayerbe, E., Berecibar, M., Bhowmik, A., Castelli, I. E., Clark, S., Dominko, R., Erakca, M., Franco, A. A., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102904 · Cited by 376
Smith, K., & Wang, C.-Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.050 · Cited by 373
Thermal Modeling of Porous Insertion Electrodes
Thomas, K. E., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1531194 · Cited by 356
Self-citationDees, D. W., Kawauchi, S., Abraham, D. P., & Prakash, J. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.09.045 · Cited by 353
Thermal modeling of cylindrical lithium ion battery during discharge cycle
Jeon, D. H., & Baek, S. M. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.04.013 · Cited by 352
Wei, Z., Zhao, J., He, H., Ding, G., Cui, H., & Liu, L. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229462 · Cited by 348
Mathematical modeling of lithium-ion and nickel battery systems
Gomadam, P. M., Weidner, J. W., Dougal, R. A., & White, R. E. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00190-8 · Cited by 344
Microstructural Modeling and Design of Rechargeable Lithium-Ion Batteries
Garcı́a, R. E., Chiang, Y.-M., Craig Carter, W., Limthongkul, P., & Bishop, C. M. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1836132 · Cited by 341
Intercalation-Induced Stress and Heat Generation within Single Lithium-Ion Battery Cathode Particles
Zhang, X., Sastry, A. M., & Shyy, W. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2926617 · Cited by 334
Nonequilibrium Thermodynamics of Porous Electrodes
Ferguson, T. R., & Bazant, M. Z. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.048212jes · Cited by 333
Xiong, R., Li, L., Li, Z., Yu, Q., & Mu, H. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.053 · Cited by 326
Quantifying the factors limiting rate performance in battery electrodes
Tian, R., Park, S.-H., King, P. J., Cunningham, G., Coelho, J., Nicolosi, V., & Coleman, J. N. (2019) · Nature Communications · doi:10.1038/s41467-019-09792-9 · Cited by 326
Al-Hallaj, S., & Selman, J. R. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00196-9 · Cited by 325
A two-dimensional modeling of a lithium-polymer battery
Kwon, K. H., Shin, C. B., Kang, T. H., & Kim, C.-S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.012 · Cited by 319
Fang, W., Kwon, O. J., & Wang, C.-Y. (2010) · International Journal of Energy Research · doi:10.1002/er.1652 · Cited by 314
Zhu, J., Dewi Darma, M. S., Knapp, M., Sørensen, D. R., Heere, M., Fang, Q., Wang, X., Dai, H., Mereacre, L., Senyshyn, A., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227575 · Cited by 313
Tippmann, S., Walper, D., Balboa, L., Spier, B., & Bessler, W. G. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.022 · Cited by 311
Modeling for the scale-up of a lithium-ion polymer battery
Kim, U. S., Shin, C. B., & Kim, C.-S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.019 · Cited by 308
Application of carbon materials in redox flow batteries
Chakrabarti, M. H., Brandon, N. P., Hajimolana, S. A., Tariq, F., Yufit, V., Hashim, M. A., Hussain, M. A., Low, C. T. J., & Aravind, P. V. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.038 · Cited by 306
Modeling diffusion-induced stress in nanowire electrode structures
Deshpande, R., Cheng, Y.-T., & Verbrugge, M. W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.02.021 · Cited by 303
Ecker, M., Tran, T. K. D., Dechent, P., Käbitz, S., Warnecke, A., & Sauer, D. U. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0551509jes · Cited by 298
Shearing, P. R., Howard, L. E., Jørgensen, P. S., Brandon, N. P., & Harris, S. J. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2009.12.038 · Cited by 296
Lettenmeier, P., Kolb, S., Sata, N., Fallisch, A., Zielke, L., Thiele, S., Gago, A. S., & Friedrich, K. A. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01240c · Cited by 296
Ren, D., Smith, K., Guo, D., Han, X., Feng, X., Lu, L., Ouyang, M., & Li, J. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0661810jes · Cited by 295
Effect of electrode configuration on the thermal behavior of a lithium-polymer battery
Kim, U. S., Shin, C. B., & Kim, C.-S. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.09.054 · Cited by 292
Qin, P., Liao, M., Zhang, D., Liu, Y., Sun, J., & Wang, Q. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.05.084 · Cited by 284
Tortuosity in electrochemical devices: a review of calculation approaches
Tjaden, B., Brett, D. J. L., & Shearing, P. R. (2018) · International Materials Reviews · doi:10.1080/09506608.2016.1249995 · Cited by 278
Key challenges for a large-scale development of battery electric vehicles: A comprehensive review
Lebrouhi, B. E., Khattari, Y., Lamrani, B., Maaroufi, M., Zeraouli, Y., & Kousksou, T. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103273 · Cited by 276
Effects of inhomogeneities - nanoscale to mesoscale - on the durability of Li-Ion batteries
Harris, S. J., & Lu, P. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp311431z · Cited by 271
Electrochemical–thermal analysis of 18650 Lithium Iron Phosphate cell
Saw, L. H., Ye, Y., & Tay, A. A. O. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.040 · Cited by 275
Shen, M., & Gao, Q. (2019) · International Journal of Energy Research · doi:10.1002/er.4433 · Cited by 271
Subramanian, V. R., Boovaragavan, V., Ramadesigan, V., & Arabandi, M. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3065083 · Cited by 270
Thick electrodes for Li-ion batteries: A model based analysis
Danner, T., Singh, M., Hein, S., Kaiser, J., Hahn, H., & Latz, A. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.143 · Cited by 270
Arora, P., Doyle, M., Gozdz, A. S., White, R. E., & Newman, J. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00527-3 · Cited by 267
Self-citationSchmidt, A. P., Bitzer, M., Imre, Á. W., & Guzzella, L. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.02.029 · Cited by 266
A Comprehensive Capacity Fade Model and Analysis for Li-Ion Batteries
Lin, X., Park, J., Liu, L., Lee, Y., Sastry, A. M., & Lu, W. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.040310jes · Cited by 265
Xu, M., Zhang, Z., Wang, X., Jia, L., & Yang, L. (2015) · Energy · doi:10.1016/j.energy.2014.11.073 · Cited by 262
Franco, A. A. (2013) · RSC Advances · doi:10.1039/c3ra23502e · Cited by 262
In Situ Observation of Strains during Lithiation of a Graphite Electrode
Qi, Y., & Harris, S. J. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3377130 · Cited by 259
Han, X., Ouyang, M., Lu, L., & Li, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.101 · Cited by 258
Han, X., Ouyang, M., Lu, L., & Li, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.089 · Cited by 258
Electric Vehicle Battery Technologies
Young, K., Wang, C., Wang, L. Y., & Strunz, K. (2013) · Electric Vehicle Integration into Modern Power Networks · doi:10.1007/978-1-4614-0134-6_2 · Cited by 255
Two-Dimensional Modeling of Lithium Deposition during Cell Charging
Tang, M., Albertus, P., & Newman, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3095513 · Cited by 255
Self-citationThe role of mechanically induced separator creep in lithium-ion battery capacity fade
Peabody, C., & Arnold, C. B. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.05.023 · Cited by 237
Jia, J., Liang, J., Shi, Y., Wen, J., Pang, X., & Zeng, J. (2020) · Energies · doi:10.3390/en13020375 · Cited by 223
Liu, B., Tang, X., & Gao, F. (2020) · Electrochimica Acta · doi:10.1016/j.electacta.2020.136098 · Cited by 199
A Framework for Simplification of PDE-Based Lithium-Ion Battery Models
Zou, C., Manzie, C., & Nesic, D. (2016) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2015.2502899 · Cited by 196
Mei, W., Zhang, L., Sun, J., & Wang, Q. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.06.021 · Cited by 183
Differential thermal voltammetry for tracking of degradation in lithium-ion batteries
Wu, B., Yufit, V., Merla, Y., Martinez-Botas, R. F., Brandon, N. P., & Offer, G. J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.127 · Cited by 151
Lithium Ion Battery Models and Parameter Identification Techniques
Barcellona, S., & Piegari, L. (2017) · Energies · doi:10.3390/en10122007 · Cited by 149
Stetzel, K. D., Aldrich, L. L., Trimboli, M. S., & Plett, G. L. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.135 · Cited by 106
Quantification of bottlenecks to fast charging of lithium-ion-insertion cells for electric vehicles
Chandrasekaran, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.106 · Cited by 72
Sorouri, H., Oshnoei, A., Che, Y., & Teodorescu, R. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.113604 · Cited by 62
Battery State of Health Estimate Strategies: From Data Analysis to End-Cloud Collaborative Framework
Yang, K., Zhang, L., Zhang, Z., Yu, H., Wang, W., Ouyang, M., Zhang, C., Sun, Q., Yan, X., Yang, S., et al. (2023) · Batteries · doi:10.3390/batteries9070351 · Cited by 58
Sun, J., Liu, X., Li, X., Chen, S., Xing, S., & Guo, Y. (2025) · Energy · doi:10.1016/j.energy.2025.134472 · Cited by 45
Physics-Based Battery Model Parametrisation from Impedance Data
Hallemans, N., Courtier, N. E., Please, C. P., Planden, B., Dhoot, R., Timms, R., Chapman, S. J., Howey, D., & Duncan, S. R. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/add41b · Cited by 34
Petit, M., Calas, E., & Bernard, J. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228766 · Cited by 28
Metadata
- Authors
- Doyle, M., Newman, J., Gozdz, A. S., Schmutz, C. N., & Tarascon, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1996-06-01
- Volume
- 143
- Issue
- 6
- Pages
- 1890-1903
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2051349350
- Cited by
- 1,569
- References
- 2
- FWCI
- 15.01
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.