Two-Way and Multiple-Way Shape Memory Polymers for Soft Robotics: An Overview
Open accessThe DOI matches its Crossref record; 300 of the 312 references it cites were found in a registry or an index; 37 of the 187 sources its claims cite were checked for support.
Abstract
Two-way and multiple-way shape memory polymers offer unique opportunities to realize untethered soft robots with programmable morphology and/or properties, repeatable actuation, and advanced multi-functionalities.
Overview
CoChat Summary
TL;DR
This review surveys thermo-responsive two-way and multiple-way shape memory polymers (SMPs) for programmable soft robotics, covering materials, manufacturing, working mechanisms, applications, and modeling/simulation. It concludes that these SMPs enable reversible and sequential shape changes, but real-world soft robotic examples remain limited and key manufacturing, characterization, and modeling gaps persist.
Key findings
- Two-way SMPs under constant stress include semi-crystalline networks and liquid crystalline elastomers (LCEs); semi-crystalline networks can show reversible strain variations between 10% and 100% under moderate stresses (typically hundreds of kPa to a few MPa), while LCEs may be strained up to 400%, exert stresses between 0.01 and 0.12 MPa, have elastic moduli between 0.1 and 5 MPa, and response times greater than 10 s.
- Stress-free two-way SMPs generally achieve recoverable actuation strains between 10% and 20%; two-way shape memory composites/laminates have limited reversible strain change, generally lower than 10%.
- Multiple-way SMPs can be designed by incorporating two or more well-separated transition temperatures or a broad glass/melting transition (temperature-memory effect); some multiple-SME SMPs reach strains of about 1000% with high shape fixity and recovery.
- For comparison, one-way SMPs may be strained up to about 800% before failure, have elastic-energy densities between 10 and 2000 MJ/m³ for strains approaching 200%, exert stresses between 0.1 and 10 MPa, and have response times greater than 10 s.
Methods
- Design: narrative review/overview of thermo-responsive two-way and multiple-way SMPs and their use in programmable soft robotics.
- Data/sample: published literature and reported examples of SMP-based soft robots and actuators; no primary experimental sample or dataset is introduced.
- Main analysis: thematic synthesis of base materials, manufacturing processes (including 3D/4D printing), working mechanisms (single-material and multi-material), applications, and modeling/simulation approaches.
Limitations
- The paper states that real-world programmable soft robots based on two-way and multiple-way SMPs remain few, that standards are lacking especially for 3D printed SMPs, and that manufacturing techniques for complex components are limited.
- The paper states that constitutive models for multiple-way and two-way SMPs are still limited, especially in the three-dimensional finite strain framework and for two-way LCEs and stress-free two-way SMPs; to the author’s knowledge, no works currently model the stress-free two-way SME.
- Evident from the text: this is a narrative overview rather than a systematic review or meta-analysis, and many quantitative claims are drawn from cited studies rather than from new experiments.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
29 Valid · 10 Not valid · 59 Not checked · 52 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“the first example of 3D printed multiple-way SMPs was provided by Wu et al. [206], who fabricated layered composite structures with SMPs having different glass transition temperatures, by using a multi-material Polyjet 3D printer.”
- Also stated in: § 3. Manufacturing · plain
“Following this idea, the first example of 3D printed multiple-way SMPs was provided by Wu et al. [206], who fabricated layered composite structures with SMPs having different glass transition temperatures, by using a multi-material Polyjet 3D printer.”
What the sources say
- Partly supportedcites [206] Wu, 2016, Multi-shape active composites by 3D printing of digital shape memory polymers, Sci. Rep. sourceExperimental — accuracy not yet measured
The Abstract (page unavailable) describes Wu et al.'s 3D-printed layered composites with SMP fibers having different glass transition temperatures and a multi-shape memory effect. Results > Design concepts and Methods > Fabrication of materials (pages unavailable) identify a multi-material Objet printer. The paper does not establish that this was the first example of 3D-printed multiple-way SMPs; it also mentions earlier work on 3D-printed digital SMPs that produced sequential shape changes. (LLM, conf=0.86)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3. Manufacturing · plain
Every source the paper cites for this claim was checked and supports it.
In the paper
“Mirtschin et al. [96] studied how programming parameters such as the strain rate and temperature holding time at the deformation temperature allow one to gain precise control of the TME in semi-crystalline polyurethanes and to design the TME under stress-free recovery conditions.”
What the sources say
- Supportedcites [96] Mirtschin, 2015, Designing temperature-memory effects in semicrystalline polyurethane, RSC Adv. source
The Conclusions state that changing strain rate and holding time at the deformation temperature provided precise control over temperature-memory behavior in semicrystalline polyurethane and allowed TMEs to be designed under stress-free recovery conditions. The Results and discussion also examine both programming parameters and stress-free recovery. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Such an approach has been largely employed to achieve multiple-way SMPs with a broad glass transition [82-92] and a broad melting transition [93-95] as the switching transition.”
What the sources say
- Not checked — no full text of the sourcecites [82] Miaudet, 2007, Shape and temperature memory of nanocomposites with broadened glass transition, Science source
- Not checked — no full text of the sourcecites [83] Xie, 2010, Tunable polymer multi-shape memory effect, Nature source
- Not checked — no full text of the sourcecites [84] Xie, 2011, Strain-Based Temperature Memory Effect for Nafion and Its Molecular Origins, Adv. Funct. Mater. source
- Not checked — no full text of the sourcecites [85] Li, 2012, A Versatile Polymer Co-Network with Broadened Glass Transition Showing Adjustable Multiple Shape Memory Effect, Macromol. Chem. Phys. source
- Not checked — no full text of the sourcecites [86] Shao, 2012, Multishape memory effect of norbornene-based copolymers with cholic acid pendant groups, Macromolecules source
- Partly supportedcites [87] Ware, 2012, Triple-shape memory polymers based on self-complementary hydrogen bonding, Macromolecules sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) discusses multiple-shape memory and mentions a broad-transition example. But the Conclusions describe this paper’s own triple-shape system as using a glass transition together with hydrogen-bond dissociation—not a broad glass transition as the switching transition. The paper therefore supports the general multiple-shape context, but not the claimed approach for this system. (LLM, conf=0.85)
- Not checked — no full text of the sourcecites [88] Samuel, 2014, Designing multiple-shape memory polymers with miscible polymer blends: Evidence and origins of a triple-shape memory effect for miscible PLLA/PMMA blends, Macromolecules source
- Not checked — no full text of the sourcecites [89] Wang, 2015, Biocompound-based multiple shape memory polymers reinforced by photo-cross-linking, ACS Biomater. Sci. Eng. source
- Not checked — no full text of the sourcecites [90] Zhang, 2016, Triple-shape memory effects of bismaleimide based thermosetting polymer networks prepared via heterogeneous crosslinking structures, RSC Adv. source
- Not checked — no full text of the sourcecites [91] Zheng, 2017, Catalyst-free thermoset polyurethane with permanent shape reconfigurability and highly tunable triple shape memory performance, ACS Macro Lett. source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“The two-stage cross-linking method has been used to fabricate stress-free two-way SMPs, i.e., class (ii); e.g., in [136-138].”
What the sources say
- Not checked — no full text of the sourcecites [136] Wu, 2014, Two-way shape memory polymer with “switch–spring” composition by interpenetrating polymer network, J. Mater. Chem. source
- Supportedcites [137] Meng, 2015, Shape actuation via internal stress-induced crystallization of dual-cure networks, ACS Macro Lett. source
The synthesis passage describes two stages of cross-linking, and the actuator passage reports reversible elongation and contraction after removal of the applied load. Figure 1 calls the resulting devices “stressfree actuators”; here, stress-free means no external load, not an absence of internal stress. (LLM, conf=0.94)
- Not checked — no full text of the sourcecites [138] Fan, 2017, A facile approach toward scalable fabrication of reversible shape-memory polymers with bonded elastomer microphases as internal stress provider, Macromol. Rapid Commun. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“This strategy has also allowed for the development of laminated polymers with double SMP layers exhibiting two-way SME also under stress-free condition [154-156].”
What the sources say
- Partly supportedcites [154] Kang, 2012, Two-way actuation behavior of shape memory polymer/elastomer core/shell composites, Smart Mater. Struct. sourceExperimental — accuracy not yet measured
The Conclusions report reversible two-way actuation in SMPU/SBS core/shell composites, and the schematic in §2.1 labels heating and cooling as occurring at zero external stress. But §2.2 describes one SMPU film coated with an SBS elastomer, not a laminate with double SMP layers. The Introduction’s laminate example likewise pairs an SMP film with an elastomeric film. (LLM, conf=0.88)
- Not checked — no full text of the sourcecites [155] Imai, 2013, An actuator of two-way behavior by using two kinds of shape memory polymers with different Tgs, Precis. Eng. source
- Partly supportedcites [156] Taya, 2013, Design of two-way reversible bending actuator based on a shape memory alloy/shape memory polymer composite, Smart Mater. Struct. sourceExperimental — accuracy not yet measured
Section 3 (page unavailable) models a three-layer laminate with two outer SMP layers, and the Conclusion (page unavailable) reports repeatable two-way bending. The active center layer contains SMA wires, however, so the paper does not establish two-way shape memory in a polymer-only laminate. The cited passages also do not establish the claimed stress-free condition. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
58 more claims · 12 with their cited sources checked
Create a free account to see all 150 claims and every source verdict.
- It may state two separate claims as one. 48
- Probably not a substantial claim. 48
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 2.3. Two-Way SMPs
“such that Tm ,1 > Tm ,2 .”
§ 2.3. Two-Way SMPs
“(v) heating the material up to Tm ,2 > T 3 > Tm ,1 under stress-free conditions.”
Citations
Cites
Williams, M. L., Landel, R. F., & Ferry, J. D. (1955) · Journal of the American Chemical Society · doi:10.1021/ja01619a008 · Cited by 8,083
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027 · cited 2×
“, origami, kirigami) [22,23], bio-inspired and bio-mimetics architectures [19,24,25], reinforced systems [26], and granular jamming [27].”
BackgroundAnalysis of Bi-Metal Thermostats
Timoshenko, S. (1925) · Journal of the Optical Society of America · doi:10.1364/josa.11.000233 · Cited by 2,426
An integrated design and fabrication strategy for entirely soft, autonomous robots
Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J. (2016) · Nature · doi:10.1038/nature19100 · Cited by 2,127
Programmable and adaptive mechanics with liquid crystal polymer networks and elastomers
White, T. J., & Broer, D. J. (2015) · Nature Materials · doi:10.1038/nmat4433 · Cited by 1,744
Soft robotics: Technologies and systems pushing the boundaries of robot abilities
Laschi, C., Mazzolai, B., & Cianchetti, M. (2016) · Science Robotics · doi:10.1126/scirobotics.aah3690 · Cited by 1,570 · cited 1×
“In fact, robots based on soft materials (widely known as soft robots) are able to withstand large deformations, perform complex motions, conform to arbitrary geometries, and sustain impacts without damage, and thus they are particularly suited to those applications where a safe interaction with people, fragile objects…”
BackgroundShape-memory polymers and their composites: stimulus methods and applications
Leng, J., Lan, X., Liu, Y., & Du, S. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.03.001 · Cited by 1,495
Biomedical applications of soft robotics
Cianchetti, M., Laschi, C., Menciassi, A., & Dario, P. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0022-y · Cited by 1,435
Tunable polymer multi-shape memory effect
Xie, T. (2010) · Nature · doi:10.1038/nature08863 · Cited by 1,380
Soft Actuators for Small-Scale Robotics
Hines, L., Petersen, K., Lum, G. Z., & Sitti, M. (2017) · Advanced Materials · doi:10.1002/adma.201603483 · Cited by 1,337 · cited 6×
“Finally, it is worth mentioning that thermally-induced SMPs may be directly triggered by heating with hot gas or water, but indirect heating has been also used (see [3,33,46] and references therein).”
BackgroundInfluential
Research works printed but not linked: 2
- Ueda, J., and Kurita, Y. (2017). Chapter Six - Soft Wearable Robotics Technologies for Body Motion Sensing. Human Modelling for Bio-Inspired Robotics, Academic Press.
- Hayashi, 1993, Properties and Applications of Polyurethane-series Shape Memory Polymer, Int. Prog. Urethanes, 6, 90
Cited by
Items 101–200 of 206
Numerical investigation of fluid–structure interaction in a pilot-operated microfluidic valve
Aissa‐Berraies, A., van Brummelen, E. H., & Auricchio, F. (2024) · Journal of Fluids and Structures · doi:10.1016/j.jfluidstructs.2024.104226 · Cited by 10
Arricca, M., Inverardi, N., Pandini, S., Toselli, M., Messori, M., Auricchio, F., & Scalet, G. (2024) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2024.105245 · Cited by 13
“SMPs display advantageous properties, e.g. , low cost, tunable behavior, low weight, high deforma-bility, and biocompatibility, and therefore attract significant interest in various application fields, ranging from biomedical and pharmaceutical (Xia et al., 2020), to aerospace (Scalet, 2020).”
Self-citationLiu, Y., Zhang, Z., Yang, K., et al. (2022) · Polymer · doi:10.1016/j.polymer.2022.124749 · Cited by 10
Qiu, Y., Zhang, S., Zhang, W., Ye, H., Zhang, H., & Zheng, Y. (2021) · Journal of Applied Mechanics · doi:10.1115/1.4052431 · Cited by 9
Lorero, I., Rico, B., Campo, M., et al. (2024) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108433 · Cited by 9
Review on advancements in 3D/4D printing for enhancing efficiency, cost-effectiveness, and quality
Solanki, A., Ranganath, M. S., & Singholi, A. K. S. (2024) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-024-02029-0 · Cited by 10
“Biomedical applications of soft robotics [53–56 ], medication delivery methods for regulated release of therapeutics [ 57–59], tissue engineering [60–63], wound-dressing products [64–66], biomimicry [67–70], regenerative medicines [ 71–73], and skin care products [74] have all benefited from the…”
Lai, S., Lin, T.-Y., & Huang, G.-L. (2023) · Journal of Polymer Research · doi:10.1007/s10965-022-03420-9 · Cited by 9
Vitrimeric shape memory polymer-based fingertips for adaptive grasping
Tabrizian, S. K., Alabiso, W., Shaukat, U., Terryn, S., Rossegger, E., Brancart, J., Legrand, J., Schlögl, S., & Vanderborght, B. (2023) · Frontiers in Robotics and AI · doi:10.3389/frobt.2023.1206579 · Cited by 9
“Different types of shape memory polymers exist, with the one-way heat-activated property being the most common type that provides reliable function (Scalet, 2020).”
BackgroundInfluentialWu, S., Fang, J., Gao, X., Liu, R., Pei, F., Li, C., & Chen, C. (2025) · Small · doi:10.1002/smll.202411029 · Cited by 7
Luminescent Liquid Crystal Elastomers: From Fabrication Toward Multifunctional Applications
Zhong, H. Q., Zhao, B., & Deng, J. (2025) · Laser & Photonics Review · doi:10.1002/lpor.202501667 · Cited by 8
Shape Morphable Soft Machines and Systems Enabled by Responsive Advanced Materials
Jaiswal, S., Dhand, C., & Dwivedi, N. (2025) · Small Methods · doi:10.1002/smtd.202501019 · Cited by 10
Liu, S., Balushi, F. A., Ji, K., Lee, L., Jin, M., Zhang, Q., Guo, R., Li, C., & Wang, H. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2026.117093 · Cited by 11
Water-actuated reversible shape-memory polydimethylsiloxane for potential biomedical applications
Sha, W., Zhao, J., Zhou, Y., Xia, J., Yuan, M., Zhang, N., Zhao, H., & Wang, Y. (2023) · Journal of Materials Chemistry B · doi:10.1039/d2tb02503e · Cited by 7
Novel constitutive models, challenges and opportunities of shape memory polymer composites
Uyan, M., & Çeliktaş, M. S. (2024) · Emerging Materials Research · doi:10.1680/jemmr.23.00116 · Cited by 9
Das, B., Peters, A. J., Li, G., & Hei, X. (2025) · Journal of Polymer Science · doi:10.1002/pol.20240649 · Cited by 6
Yang, Y., Tian, L. F., Chen, X., et al. (2022) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x211072191 · Cited by 7
“…Li et al., 2020; Lin et al., 2019; Oh et al., 2020; Wang et al., 2018; Zhao et al., 2017), aerospace engineering (Dao et al., 2018; Lan et al., 2020; Liu et al., 2020; Margoy et al., 2021), and soft robotics (Ilami et al., 2021; Sachyani Keneth et al., 2021; Scalet, 2020; Schönfeld et al., 2021).”
BackgroundMehrpouya, M., & Huang, W. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-824082-3.00002-7 · Cited by 11
Two‐way shape memory behavior of styrene‐based bilayer shape memory polymer plate
Du, H., Yao, Y., Zhou, X., & Zhao, Y. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5882 · Cited by 8
Inverardi, N., Pandini, S., Gemmo, G., Toselli, M., Messori, M., Scalet, G., & Auricchio, F. (2022) · Macromolecular Symposia · doi:10.1002/masy.202100254 · Cited by 8
Self-citationNovel Stimuli‐Responsive Turbostratic Oxides/Hydroxides for Material‐Driven Robots
Kwan, K. W., Wu, R., Ma, W., & Ngan, A. H. W. (2021) · Advanced Intelligent Systems · doi:10.1002/aisy.202000215 · Cited by 8
Toward soft robotic inspection for aircraft: An overview and perspective
Groo, L., Juhl, A. T., & Baldwin, L. A. (2024) · MRS Communications · doi:10.1557/s43579-024-00586-9 · Cited by 7
Inverardi, N., Toselli, M., Messori, M., Scalet, G., Auricchio, F., & Pandini, S. (2024) · Smart Materials and Structures · doi:10.1088/1361-665x/ad6414 · Cited by 8
“…which have drawn significant attention in the course of the years due to their great potential for many challenging applications in which an external, non-mechanical actuation of a device is required in several different fields, ranging from biomedical [1–4], aerospace [5] to robotics [6–9].”
Self-citationSelectively Tunable Joints With Variable Stiffness for a Magnetically-Steerable 6-DOF Manipulator
Frieler, S., Misra, S., & Venkiteswaran, V. K. (2024) · IEEE Transactions on Medical Robotics and Bionics · doi:10.1109/tmrb.2024.3464668 · Cited by 6
“Compared to SMAs, SMPs exhibit greater stiffness variation, are compatible with 3D-printing techniques [34], and allow multiple transition points close to human body temperature [35].”
BackgroundZanoni, M., Cremonini, A., Toselli, M., Montalti, M., Natali, D., Focarete, M. L., Masiero, S., & Gualandi, C. (2024) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2024.136231 · Cited by 6
Biomimetic Robots Inspired by Annelid Animals: Research Progress and Development Trend
Chen, N., Jiang, F., Du, X., Wu, Y., Yan, L., & Zhang, R. (2025) · Journal of Bionic Engineering · doi:10.1007/s42235-025-00750-4 · Cited by 6
“Shape memory polymers can be programmed and reprogrammed into any shape, and both recovery and actuation behaviors are reprogrammable [ 103, 115].”
InfluentialBridging scales: machine learning for the rational design and modelling of shape memory polymers
Yan, C., & Scalet, G. (2025) · Soft Matter · doi:10.1039/d5sm00980d · Cited by 6
Self-citationZeng, H., Shi, J., Sun, H., Gu, J., Xu, X., & Song, L. (2024) · Smart Materials and Structures · doi:10.1088/1361-665x/ad8aac · Cited by 7
“The increasing utilization of soft matter in smart actuators and robotic designs is a consequence of the flexibility, light-weight nature, and cost-effectiveness of this material, which has led to the development of scalable products (Davidson et al 2019, Scalet 2020, Wang et al 2020).”
Characterisation of the shape memory effect of PET polymer by FFF 3D printing
Ermolai, V. (2023) · Materials research proceedings · doi:10.21741/9781644902479-11 · Cited by 7
Effects of recycling on polystyrene shape memory polymers for in-situ resource utilization
Nelson, M. A., Siwakoti, M., Cardon, R., Triggs, E., & Mailen, R. W. (2023) · Smart Materials and Structures · doi:10.1088/1361-665x/acef82 · Cited by 6
Liquid Crystalline Hydrogel Capable of Thermally-induced Dual Actuation
Chen, Y.-M., & Zhao, Y. (2024) · Chinese Journal of Polymer Science · doi:10.1007/s10118-025-3251-8 · Cited by 5
Gupta, T., Kumawat, V. S., Ghosh, S. B., Bandyopadhyay‐Ghosh, S., & Sain, M. M. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch16 · Cited by 5
Li, Y., Deng, J., Cao, S., Hou, T., Wang, F., Ma, X., Ke, C.-B., Zeng, C., & Zhang, X. (2025) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2025.04.021 · Cited by 3
Groth, C., Chiappa, A., Biancolini, M. E., et al. (2025) · Smart Materials and Structures · doi:10.1088/1361-665x/adf309 · Cited by 4
“Moreover, depending on the polymer type and on the programming step applied to the material, SMPs can exhibit various forms of thermally-driven SME [2].”
Self-citationShape Memory Polymers in 4D Printing: Investigating Multi-Material Lattice Structures
Pokras, D., Schneider, Y., Zaidi, S., & Viswanathan, V. K. (2024) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp8040154 · Cited by 7
Bio-inspired multimodal soft grippers: a review
Liang, M., Zhu, J., Ke, X., Chai, Z., Ding, H., & Wu, Z. (2025) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/add1a6 · Cited by 7
Shape memory textiles – technological background and possible applications
Ehrmann, G., & Ehrmann, A. (2021) · Communications in development and assembling of textile products · doi:10.25367/cdatp.2021.2.p162-172 · Cited by 4
Biomimetic Water-Responsive Helical Actuators for Space-Efficient and Adaptive Robotic Grippers
Zhao, C., Liu, J., Duan, L., Lan, R., Yu, X., Hua, H., Zhou, C. Q., Liu, Q., & Xu, C. (2024) · Journal of Bionic Engineering · doi:10.1007/s42235-024-00592-6 · Cited by 5
“However, challenges persist, such as the intricate temperature control required for the two-way SMPs, and the instability of their temporary forms [ 20, 21 ].”
Optimization of Structure of Soft Block for Design of Adaptive Polyurethanes
Gorbunova, М. А., Anokhin, D. V., Lesnichaya, V. A., Grishchuk, A. A., & Badamshina, E. R. (2020) · Key engineering materials · doi:10.4028/www.scientific.net/kem.869.273 · Cited by 4
“For example, such materials demonstrate two switching temperatures of their mechanical properties and show complex response on external stimuli [6, 7].”
BackgroundInvestigation of the Long‐Term Storage Stability of Shape Memory Epoxy Prepolymer
Wan, X., He, Y., & Leng, J. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202101023 · Cited by 5
Exploring shape memory polymer activation via terahertz stimuli for next-generation soft robotics
Libber, M., Gariya, N., & Kumar, M. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.113903 · Cited by 3
Prompt2Poly: ask, specify, create – a dialogue-based large language model for targeted TSMPs design
Das, B., Peters, A. J., Li, G., & Hei, X. (2025) · Polymer Chemistry · doi:10.1039/d5py00921a · Cited by 3
Shi, J., Gorbacheva, G., & Lu, H. (2026) · Science China Technological Sciences · doi:10.1007/s11431-025-3233-6 · Cited by 3
Multimaterial 4D printing simulation using a grasshopper plugin
Sossou, G., Belkebir, H., & Demoly, F. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-95430-3.00012-9 · Cited by 3
Exley, T., Hays, E., Johnson, D., Moridani, A., Motati, R., & Jafari, A. (2024) · Robotics Reports · doi:10.1089/rorep.2023.0023 · Cited by 4
“The number of transition temperatures the material has dictates how many forms the material can hold 30 .”
Zeenat, L., Zolfagharian, A., Bodaghi, M., & Pati, F. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95151-7.00013-2 · Cited by 4
Ramasamy, C., Tan, J. C., & Low, H. Y. (2024) · Small · doi:10.1002/smll.202406479 · Cited by 3
Shape‐memory Polymers for Tissue Engineering Applications
Zheng, F., García‐García, A., Moreno, I., Ruiz‐Rubio, L., Pérez‐Álvarez, L., & Vilas‐Vilela, J. L. (2024) · Wiley eBooks · doi:10.1002/9783527838882.ch3 · Cited by 5
Shape memory polymer coatings for smart and sustainable systems
Bisht, N., Vishwakarma, J., Jaiswal, S., Shivani, S., Patel, K. K., Mishra, A., Srivastava, A. K., Dhand, C., & Dwivedi, N. (2025) · Materials Today Chemistry · doi:10.1016/j.mtchem.2025.102607 · Cited by 5
Additive manufacturing process for production of complex and oscillating POSS-based 4D structures
Gorohovsky, N., Verker, R., & Lachman, N. (2025) · Virtual and Physical Prototyping · doi:10.1080/17452759.2025.2527387 · Cited by 2
“A more potent group of SMPs is the reversible or two-way SMPs (2WSMPs) that are able to revert back and forth between two shapes under cyclic stimulation [18,21,22].”
Failure of shape-memory polymers: Experimentation and modeling
Goswami, M., Arricca, M., Bonetti, L., Pandini, S., Scalet, G., & Volokh, K. (2025) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2025.105820 · Cited by 4
Self-citationImproved actuation of liquid crystal elastomers via solvent engineering
Choi, J.-S., Jeon, S., & Yu, W.-R. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2025.114254 · Cited by 4
Kumar, S. V., Ram Prasanth, S., Gopakumar, D. A., Sarath, P. S., Ratheesh, P. M., Kothandaraman, B., Parameswaranpillai, J., & George, J. J. (2025) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2025.2559271 · Cited by 4
“[45] All liquid crystal elastomer (LCE) based SMP; photo initiated SMP, and PLC-based SMP are of this class.”
Frieler, S., de Vries, J. P. M., Misra, S., et al. (2026) · Advanced Functional Materials · doi:10.1002/adfm.202527009 · Cited by 2
“SMP-actuators can be designed to exhibit multiple transition temperatures triggered by external stimuli such as heat, light, electric, or magnetic fields [34, 35].”
Li, Z., Sun, J., Liu, Y., et al. (2026) · Composite Structures · doi:10.1016/j.compstruct.2026.120171 · Cited by 2
Shape-memory polymer nanocomposites: Processing, mechanisms, modelling, and applications
Vozniak, A., Santo, L., & Vozniak, I. (2026) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2026.03.002 · Cited by 4
Effect of Geometrical Shape on Axial Deformation of Soft Actuator
Mehta, V., & Chauhan, M. M. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2115/1/012047 · Cited by 2
“Scalet [13] reviewed the soft robots and soft actuators based on shape memory polymers considering materials, manufacturing techniques, and design strategies.”
Xu, X., Wang, Z., Zhang, Q., Zhang, K., Li, M., Yang, J., Zhao, Y., Ke, Q., Guan, Q., & Hu, J. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.143620 · Cited by 2
Two‐Way Shape Memory Polymer Composite Gripper for Adaptive Robotic Applications
Hameed, A., & Khan, K. A. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202500614 · Cited by 4
An Approach to Sequential Self-folding of Planar Sheet using Aluminium
Rahmad, R., Shigemune, H., & Ishii, H. (2021) · IEEE/ASME International Conference on Advanced Intelligent Mechatronics · doi:10.1109/aim46487.2021.9517375 · Cited by 2
4D Printing of Stimuli-Responsive Materials
Yan, C., Yang, X. Y., & Wu, H. (2022) · Springer eBooks · doi:10.1007/978-3-031-04721-3_3 · Cited by 4
High Energy Release-high Retraction Smart Polymer Fibers used in Artificial Muscle Fabrication
Karevan, M., Motalleb, M. A., Jannesari, A., & Zeinali, M. (2023) · International Journal of Engineering · doi:10.5829/ije.2023.34.04a.15 · Cited by 3
Harnessing length and height changes in thermoresponsive programmable materials
Chalissery, D., Rümmler, T., Ziervogel, F., Eberl, C., & Pretsch, T. (2023) · Programmable Materials · doi:10.1017/pma.2023.9 · Cited by 2
“Likewise, significant actuation was verified in other contributions on physically cross-linked PEUs (Behl et al., 2013; Fan et al., 2017, 2018a,b, 2020).”
Numerical Investigation of Fluid-Structure Interaction in a Pilot-Operated Microfluidic ValvePreprint
Berraies, A. A., van Brummelen, E. H., & Auricchio, F. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4807073 · Cited by 2
Namathoti, S., Gurrala, P. K., Chandra, P., & Vakkalagadda, M. R. K. (2025) · Wiley eBooks · doi:10.1002/9781394213795.ch5 · Cited by 2
Motion Planning for Serial Mechanisms Based on Precurved Flexible Beams
Idelson, Y., & Medina, O. (2022) · IEEE Access · doi:10.1109/access.2022.3224932 · Cited by 2
“These mechanisms have mainly soft bodies [5] and can move via many different actuation methods [6], [7] including shape memory alloys [8], [9] and polymers [10], [11], motorized tendons [12], electroactive polymers [13], [14], self-healing polymers [15] ferromagnetic elastomers [16], [17], biohybrid [18] and fluidic a…”
BackgroundShort foray into the stages of conversion from 2.5D to volumetric printing
Boca, M., Sover, A., & Slătineanu, L. (2023) · doi:10.4995/bmt2023.2023.16748 · Cited by 4
Rheologic and shape memory properties of natural biopolymers
Yaakob, M. N. A., Roslan, R., & Rahim, M. H. A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-99856-7.00001-x · Cited by 1
Shi, J., Chen, N., Tian, J., Gu, J., Sun, H., & Zeng, H. (2025) · Smart Materials and Structures · doi:10.1088/1361-665x/ade210 · Cited by 3
“…being lightweight, cost-effective, easy to process, having good compatibility, significant deformability, and recoverability, thus have found applications in high-tech fields, e.g. robotics [4], smart actuators [5], intelligent medical devices [6], and self-deployable structures in aerospace [1].”
Polymers as the Primary Fabrication Material for Soft Robotic Grippers: A Concise Review
Yeromina, M., Duplák, J., Mikuláško, S., & Kaščák, R. (2025) · Polymers · doi:10.3390/polym17182464 · Cited by 4
“An important contribution to the development of smart materials for soft robotics is a review paper by Scalet [50], which discusses shape-memory polymers with repeatable bidirectional and multidirectional effects, and their potential for actuators and adaptive grippers.”
Bonetti, L., Natali, D., Pandini, S., Messori, M., Toselli, M., & Scalet, G. (2025) · Macromolecular Rapid Communications · doi:10.1002/marc.202500631 · Cited by 6
Self-citationBong, K. F., Tshai, K. Y., Mustapha, K. B., & Marwan Nafea, M. (2026) · Progress in Additive Manufacturing · doi:10.1007/s40964-026-01708-6 · Cited by 1
“In 4D printing, the shape memory behavior is commonly classified into one-way, two-way, and multi-way shape memory effects (OWSME, TWSME, and MWSME) [ 9, 22].”
Electro-Induced Two-Way Shape Memory Thermoplastic Polyamide Elastomer/Carbon Nanotubes CompositesPreprint
Lu, Y., Wu, Y., Wu, J., et al. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4686081 · Cited by 1
Proceedings - 5th International Conference Business Meets Technology 2023
BMT Scientific Committee (2023) · doi:10.4995/bmt2023.2023.17398 · Cited by 1
Stimuli responsive graphene-based materials
Kausar, A. (2021) · Elsevier eBooks · doi:10.1016/b978-0-323-90937-2.00003-4
Khewle, S., Nemani, P., Sharma, N., & Dayal, P. (2022) · ChemRxiv · doi:10.26434/chemrxiv-2022-xwrc7-v2
Hierarchical motion of 4D-printed structures using the temperature memory effect
Scalet, G., Pandini, S., Inverardi, N., & Auricchio, F. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-95430-3.00010-5
Self-citationDemoly, F., & André, J. (2022) · Wiley eBooks · doi:10.1002/9781394171521.ch1
Is 4D Printing Disruptive or Incremental, or a Bit of Both?
Demoly, F., & André, J. (2022) · Wiley eBooks · doi:10.1002/9781394163786.ch1
Surface morphing control of mechanical metamaterials using geometrical imperfections
Park, Y., & Loh, K. J. (2023) · Journal of Materials Science · doi:10.1007/s10853-023-08872-y
Shape memory polymers: mechanism, structure, and properties
Kausar, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-18504-5.00015-4
Shape memory polymer–based nanocomposites
Kausar, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-18504-5.00009-9
3D Printing of TPU-PLA Shape Memory Polymers and Nanocomposites for Deployable Structures
Jakubinek, M. B., Sun, Y., Barnes, M., McLellan, K., & Naguib, H. E. (2024) · AIAA SciTech Forum · doi:10.2514/6.2024-2149
MULTI-MATERIAL SHAPE MEMORY POLYMERS: DESIGN CONSIDERATIONS AND IMPLEMENTATION
(2024) · International Journal of Mechatronics and Applied Mechanics · doi:10.17683/ijomam/issue15.1
Design on thermal-mechanism coordination for binding reinforcing mesh based on shape memory polymer
Gu, X., Yin, H., Liu, B., Chen, X. W., Chen, W., & Zhang, H. (2024) · Smart Materials and Structures · doi:10.1088/1361-665x/ad4e7a
“Since the thermal-driven stimulation is easy for changing the SMP shape, thermal-driven SMPs have wide range of applications [27], such as aerospace [28], biomedical [29, 30], soft robot [31] and electronic components fields [32].”
Shape-memory polymer/nanodiamond nanocomposites: Design and functioning
Kausar, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15908-4.00003-2
Shape memory and shape recovery characterization of thermoplastic urethane
Patil, A. N., & Sarje, S. H. (2024) · Advances in Materials and Processing Technologies · doi:10.1080/2374068x.2024.2379104 · Cited by 3
“…novel functional applications [14,27,28] in different domains including aerospace and aviation industries [14,29–32], robotic sensors and actuators [33–35], self-expandable vascular stents in a biomedical field [36], smart textile which is used in smart sport wears, shoe insoles, smart mattresses,…”
Synthesis of Pure and Engineered Soft Materials
Rajput, S., Kaur, R., & Sharma, S. (2024) · Advanced structured materials · doi:10.1007/978-981-97-9468-3_1 · Cited by 1
3D printed nanocomposites: thermal-responsive shape memory properties and characterization
Gomoli, P. A., Farnia, S. M. F., & Abrinia, K. (2025) · Progress in Additive Manufacturing · doi:10.1007/s40964-025-00981-1
Failure of Shape-Memory Polymers: Experimentation and ModelingPreprint
Goswami, M., Arricca, M., Bonetti, L., et al. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5226153
Self-citationShi, J., & Lu, H. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5437879
Barmouz, M., Siahsarani, A., Boo, I. R., & Azarhoushang, B. (2026) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-026-0121-4
“Among them, shape memory alloys (SMAs) and shape memory polymers (SMPs) are widely used and extensively studied [13, 14].”
Hybrid voxels 4D printing based on topologically interlocked multi-material assembly
Benyahia, K. (2023) · theses.fr (ABES) · doi:10.70675/6091d5c4z9f92z44c5z8847zc6267319fcb2 · Cited by 1
Construction d'un jumeau numérique pour l'impression 4D de matériaux intelligents
Akbar, I. (2023) · theses.fr (ABES) · doi:10.70675/9ee64acczf6c9z4eabz93d0z069f07635da6
Environmentally responsive building components: hydrogel-based material system
Han, N., & Yazıcı, S. (2026) · Energy and Buildings · doi:10.1016/j.enbuild.2026.117655
Arricca, M., Bonetti, L., Messori, M., et al. (2026) · Materials Science and Engineering B · doi:10.1016/j.mseb.2026.119579
Self-citationPrem, N., Gowda, D. K., Odenbach, S., & Zimmermann, K. (2026) · Springer eBooks · doi:10.1007/978-3-032-22453-8_4
18 Shape Memory Polymer Filaments
Krooß, F., & Dreiner, P. (2024) · Carl Hanser Verlag GmbH & Co. KG eBooks · doi:10.1007/978-1-56990-315-5_18
Recent advances in smart polymers for biomedical applications using additive manufacturing systems
Oladele, I. O., Ajayi, M. A., Adewumi, Q. O., Onuh, N. L., Abraham, O. F., Taiwo, A. T., & Orisawayi, A. O. (2026) · Discover Mechanical Engineering · doi:10.1007/s44245-026-00265-0
Yeshiwas, T. A., Siyoum, Y. B., Tiruneh, A. B., Alehegn, Y. L., Nega, A. Y., & Sisay, M. A. (2026) · Results in Materials · doi:10.1016/j.rinma.2026.101010 · Cited by 1
Rahman, B., Bardak, C., Çelebi, A., Behvar, A., & Elahinia, M. (2026) · Shape Memory and Superelasticity · doi:10.1007/s40830-026-00634-4 · Cited by 2
Metadata
- Authors
- Scalet, G.
- Affiliations
- University of Pavia (IT)
- Corresponding author
- Scalet, Giulia
- ORCID
- Scalet, Giulia
- Venue
- Actuators
- Publisher
- MDPI AG
- Published
- 2020-02-15
- Volume
- 9
- Issue
- 1
- Pages
- 10
- ISSN
- 2076-0825 (ISSN-L)
- OpenAlex
- W3006401357
- Cited by
- 209
- References
- 312
- Citations by year
- 2026: 22 · 2025: 35 · 2024: 53 · 2023: 33 · 2022: 37 · 2021: 23 · 2020: 6
- FWCI
- 12.18
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Actuators (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Dielectric materials and actuators
- Keywords
- shape memory polymers, soft robotics, temperature-responsive materials, untethered soft robots, soft actuators, smart materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-08, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-08 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.