The DOI matches its Crossref record; 121 of the 121 references it cites were found in a registry or an index.
Design and Optimization of Lattice Structures: A Review
Open accessAbstract
Cellular structures consist of foams, honeycombs, and lattices. Lattices have many outstanding properties over foams and honeycombs, such as lightweight, high strength, absorbing energy, and reducing vibration, which has been extensively studied and concerned. Because of excellent properties, lattice structures have been widely used in aviation, bio-engineering, automation, and other industrial fields. In particular, the application of additive manufacturing (AM) technology used for fabricating lattice structures has pushed the development of designing lattice structures to a new stage and made a breakthrough progress. By searching a large number of research literature, the primary work of this paper reviews the lattice structures. First, based on the introductions about lattices of literature, the definition and classification of lattice structures are concluded. Lattice structures are divided into two general categories in this paper: uniform and non-uniform. Second, the performance and application of lattice structures are introduced in detail. In addition, the fabricating methods of lattice structures, i.e., traditional processing and additive manufacturing, are evaluated. Third, for uniform lattice structures, the main concern during design is to develop highly functional unit cells, which in this paper is summarized as three different methods, i.e., geometric unit cell based, mathematical algorithm generated, and topology optimization. Forth, non-uniform lattice structures are reviewed from two aspects of gradient and topology optimization. These methods include Voronoi-tessellation, size gradient method (SGM), size matching and scaling (SMS), and homogenization, optimization, and construction (HOC). Finally, the future development of lattice structures is prospected from different aspects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
Ashby, M., Evans, A., Fleck, N., Gibson, L., Hutchinson, J., Wadley, H., & Delale, F. (2001) · Applied Mechanics Reviews · doi:10.1115/1.1421119 · Cited by 2,694
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
The properties of foams and lattices
Ashby, M. F. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1678 · Cited by 1,771
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Topology Optimization in Aircraft and Aerospace Structures Design
Zhu, J.-H., Zhang, W.-H., & Xia, L. (2016) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-015-9151-2 · Cited by 980
Al-Ketan, O., Rowshan, R., & Abu Al-Rub, R. K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.006 · Cited by 941
Multifunctional periodic cellular metals
Wadley, H. N. G. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1697 · Cited by 919
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Parthasarathy, J., Starly, B., Raman, S., & Christensen, A. (2010) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2009.10.006 · Cited by 816
Heinl, P., Müller, L., Körner, C., Singer, R. F., & Müller, F. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.013 · Cited by 815
Tancogne-Dejean, T., Spierings, A. B., & Mohr, D. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.054 · Cited by 806
Architected Cellular Materials
Schaedler, T. A., & Carter, W. B. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031624 · Cited by 786
Evaluations of cellular lattice structures manufactured using selective laser melting
Yan, C., Hao, L., Hussein, A., & Raymont, D. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.06.002 · Cited by 730
Maskery, I., Sturm, L., Aremu, A. O., Panesar, A., Williams, C. B., Tuck, C. J., Wildman, R. D., Ashcroft, I. A., & Hague, R. J. M. (2018) · Polymer · doi:10.1016/j.polymer.2017.11.049 · Cited by 728
Multifunctionality of cellular metal systems
Evans, A. G. (1998) · Progress in Materials Science · doi:10.1016/s0079-6425(98)00004-8 · Cited by 695
Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., et al. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0010 · Cited by 636
Additive manufacturing of 3D nano-architected metals
Vyatskikh, A., Delalande, S., Kudo, A., Zhang, X., Portela, C. M., & Greer, J. R. (2018) · Nature Communications · doi:10.1038/s41467-018-03071-9 · Cited by 593
Light-weighting in aerospace component and system design
Zhu, L., Li, N., & Childs, P. R. N. (2018) · Propulsion and Power Research · doi:10.1016/j.jppr.2018.04.001 · Cited by 583
Minimal surface scaffold designs for tissue engineering
Kapfer, S. C., Hyde, S. T., Mecke, K., Arns, C. H., & Schröder-Turk, G. E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.012 · Cited by 579
Arabnejad, S., Burnett Johnston, R., Pura, J. A., Singh, B., Tanzer, M., & Pasini, D. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.10.048 · Cited by 578
Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., & Ashcroft, I. A. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.04.003 · Cited by 575
Infill Optimization for Additive Manufacturing—Approaching Bone-Like Porous Structures
Wu, J., Aage, N., Westermann, R., & Sigmund, O. (2017) · IEEE Transactions on Visualization and Computer Graphics · doi:10.1109/tvcg.2017.2655523 · Cited by 572
High-strength cellular ceramic composites with 3D microarchitecture
Bauer, J., Hengsbach, S., Tesari, I., Schwaiger, R., & Kraft, O. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1315147111 · Cited by 563
Metallic foams: their production, properties and applications
Davies, G. J., & Zhen, S. (1983) · Journal of Materials Science · doi:10.1007/bf00554981 · Cited by 561
Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations
Clausen, A., Wang, F., Jensen, J. S., Sigmund, O., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201502485 · Cited by 551
Overview of Current Additive Manufacturing Technologies and Selected Applications
Horn, T. J., & Harrysson, O. L. A. (2012) · Science Progress · doi:10.3184/003685012x13420984463047 · Cited by 542
Nazir, A., Abate, K. M., Kumar, A., & Jeng, J.-Y. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04085-3 · Cited by 528
Al-saedi, D. S. J., Masood, S. H., Faizan‐Ur‐Rab, M., Alomarah, A., & Ponnusamy, P. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.059 · Cited by 527
Design and properties of 3D scaffolds for bone tissue engineering
Gómez, S., Vlad, M. D., López, J., & Fernández, E. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.06.032 · Cited by 477
Anisogrid composite lattice structures – Development and aerospace applications
Vasiliev, V. V., Barynin, V. A., & Razin, A. F. (2011) · Composite Structures · doi:10.1016/j.compstruct.2011.10.023 · Cited by 457
Advanced lattice support structures for metal additive manufacturing
Hussein, A., Hao, L., Yan, C., Everson, R., & Young, P. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.01.020 · Cited by 454
Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing
du Plessis, A., Broeckhoven, C., Yadroitsava, I., Yadroitsev, I., Hands, C. H., Kunju, R., & Bhate, D. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.033 · Cited by 448
Mechanical response of Ti–6Al–4V octet-truss lattice structures
Dong, L., Deshpande, V. S., & Wadley, H. N. G. (2015) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2015.02.020 · Cited by 408
Evaluation of topology-optimized lattice structures manufactured via selective laser melting
Xiao, Z., Yang, Y., Xiao, R., Bai, Y., Song, C., & Wang, D. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.023 · Cited by 380
Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium
KOOISTRA, G. (2004) · Acta Materialia · doi:10.1016/j.actamat.2004.05.039 · Cited by 375
Design, analysis and manufacturing of lattice structures: an overview
Helou, M., & Kara, S. (2018) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2017.1407456 · Cited by 370
Yan, C., Hao, L., Hussein, A., Bubb, S. L., Young, P., & Raymont, D. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.12.004 · Cited by 362
Li, S. J., Xu, Q. S., Wang, Z., Hou, W. T., Hao, Y. L., Yang, R., & Murr, L. E. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.010 · Cited by 360
A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing
Dong, G., Tang, Y., & Zhao, Y. F. (2017) · Journal of Mechanical Design · doi:10.1115/1.4037305 · Cited by 337
Energy absorption in lattice structures in dynamics: Experiments
Özdemir, Z., Hernández-Nava, E., Tyas, A., Warren, J. A., Fay, S., Goodall, R., Todd, I., & Askes, H. (2015) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2015.10.007 · Cited by 325
Review of Mechanics and Applications of Auxetic Structures
Mir, M., Ali, M. N., Sami, J., & Ansari, U. (2014) · Advances in Materials Science and Engineering · doi:10.1155/2014/753496 · Cited by 324
Cellular metal lattices with hollow trusses
Queheillalt, D. T., & Wadley, H. N. G. (2005) · Acta Materialia · doi:10.1016/j.actamat.2004.09.024 · Cited by 323
Anisogrid composite lattice structures for spacecraft and aircraft applications
Vasiliev, V. V., & Razin, A. F. (2006) · Composite Structures · doi:10.1016/j.compstruct.2006.06.025 · Cited by 323
Design of lattice structure for additive manufacturing
Tao, W., & Leu, M. C. (2016) · 2016 International Symposium on Flexible Automation (ISFA) · doi:10.1109/isfa.2016.7790182 · Cited by 316
Modelling the mechanical behavior of cellular materials
Gibson, L. J. (1989) · Materials Science and Engineering: A · doi:10.1016/0921-5093(89)90154-8 · Cited by 306
Zhang, B., Pei, X., Zhou, C., Fan, Y., Jiang, Q., Ronca, A., D'Amora, U., Chen, Y., Li, H., Sun, Y., et al. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.04.065 · Cited by 305
Moon, S. K., Tan, Y. E., Hwang, J., & Yoon, Y.-J. (2014) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-014-0028-x · Cited by 299
Build-to-last: strength to weight 3D printed objects
Lu, L., Sharf, A., Zhao, H., Wei, Y., Fan, Q., Chen, X., Savoye, Y., Tu, C., Cohen-Or, D., & Chen, B. (2014) · ACM Transactions on Graphics · doi:10.1145/2601097.2601168 · Cited by 290
Montazerian, H., Davoodi, E., Asadi-Eydivand, M., Kadkhodapour, J., & Solati-Hashjin, M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.009 · Cited by 286
Wadley, H. N. G. (2002) · Advanced Engineering Materials · doi:10.1002/1527-2648(20021014)4:10<726::aid-adem726>3.0.co;2-y · Cited by 283
A review on integration of lightweight gradient lattice structures in additive manufacturing parts
Seharing, A., Azman, A. H., & Abdullah, S. (2020) · Advances in Mechanical Engineering · doi:10.1177/1687814020916951 · Cited by 270
3D printing of drug-loaded gyroid lattices using selective laser sintering
Fina, F., Goyanes, A., Madla, C. M., Awad, A., Trenfield, S. J., Kuek, J. M., Patel, P., Gaisford, S., & Basit, A. W. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.05.044 · Cited by 265
Zhao, S., Li, S. J., Hou, W. T., Hao, Y. L., Yang, R., & Misra, R. D. K. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.01.034 · Cited by 262
Köhnen, P., Haase, C., Bültmann, J., Ziegler, S., Schleifenbaum, J. H., & Bleck, W. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.062 · Cited by 252
Zhang, P., Toman, J., Yu, Y., Biyikli, E., Kırca, M., Chmielus, M., & To, A. C. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028724 · Cited by 248
Active cooling by metallic sandwich structures with periodic cores
LU, T., VALDEVIT, L., & EVANS, A. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.03.001 · Cited by 243
Zhao, S., Li, S. J., Wang, S. G., Hou, W. T., Li, Y., Zhang, L. C., Hao, Y. L., Yang, R., Misra, R. D. K., & Murr, L. E. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.02.060 · Cited by 239
Concepts for enhanced energy absorption using hollow micro-lattices
Evans, A. G., He, M. Y., Deshpande, V. S., Hutchinson, J. W., Jacobsen, A. J., & Carter, W. B. (2010) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2010.03.007 · Cited by 236
Thermal conductivity of TPMS lattice structures manufactured via laser powder bed fusion
Catchpole-Smith, S., Sélo, R. R. J., Davis, A. W., Ashcroft, I. A., Tuck, C. J., & Clare, A. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100846 · Cited by 234
Mechanical properties of an extruded pyramidal lattice truss sandwich structure
Queheillalt, D. T., Murty, Y., & Wadley, H. N. G. (2008) · Scripta Materialia · doi:10.1016/j.scriptamat.2007.08.041 · Cited by 232
Zhong, T., He, K., Li, H., & Yang, L. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108076 · Cited by 224
Additively manufactured porous metallic biomaterials
Zadpoor, A. A. (2019) · Journal of Materials Chemistry B · doi:10.1039/c9tb00420c · Cited by 213
Design and analysis of strut-based lattice structures for vibration isolation
Syam, W. P., Jianwei, W., Zhao, B., Maskery, I., Elmadih, W., & Leach, R. (2018) · Precision Engineering · doi:10.1016/j.precisioneng.2017.09.010 · Cited by 209
Design of materials with prescribed nonlinear properties
Wang, F., Sigmund, O., & Jensen, J. S. (2014) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2014.05.003 · Cited by 206
Dumas, M., Terriault, P., & Brailovski, V. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.021 · Cited by 206
Simulated properties of Kagomé and tetragonal truss core panels
Hyun, S., Karlsson, A. M., Salvatore Torquato, A., & Evans, A. G. (2003) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(03)00350-0 · Cited by 203
Tang, Y., Kurtz, A., & Zhao, Y. F. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.06.001 · Cited by 198
A survey of the design methods for additive manufacturing to improve functional performance
Tang, Y., & Zhao, Y. F. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2015-0011 · Cited by 193
Yang, W., An, J., Chua, C. K., & Zhou, K. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2020.1740747 · Cited by 191
Zok, F. W., Latture, R. M., & Begley, M. R. (2016) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2016.07.007 · Cited by 188
Ultra-strong architected Cu meso-lattices
Wendy Gu, X., & Greer, J. R. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.01.006 · Cited by 182
Liu, F., Zhang, D., Zhang, P., Zhao, M., & Jafar, S. (2018) · Materials · doi:10.3390/ma11030374 · Cited by 173
Multifunctional heat exchangers derived from three-dimensional micro-lattice structures
Maloney, K. J., Fink, K. D., Schaedler, T. A., Kolodziejska, J. A., Jacobsen, A. J., & Roper, C. S. (2012) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2012.01.011 · Cited by 171
Lattice Structure Design and Optimization With Additive Manufacturing Constraints
Tang, Y., Dong, G., Zhou, Q., & Zhao, Y. F. (2017) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2017.2685643 · Cited by 163
Numerical comparison of lattice unit cell designs for medical implants by additive manufacturing
du Plessis, A., Yadroitsava, I., Yadroitsev, I., le Roux, S., & Blaine, D. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1491713 · Cited by 160
Fatigue behavior of Ti-6Al-4V cellular structures fabricated by additive manufacturing technique
Ren, D., Li, S., Wang, H., Hou, W., Hao, Y., Jin, W., Yang, R., Misra, R. D. K., & Murr, L. E. (2018) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2018.09.066 · Cited by 154
Topology optimization: a tool for the tailoring of structures and materials
Sigmund, O. (2000) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2000.0528 · Cited by 150
Design and Analysis of Lattice Structures for Additive Manufacturing
Beyer, C., & Figueroa, D. (2016) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4033957 · Cited by 150
The Design Process of Additively Manufactured Mesoscale Lattice Structures: A Review
Tamburrino, F., Graziosi, S., & Bordegoni, M. (2018) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4040131 · Cited by 149
3D auxetic single material periodic structure with ultra-wide tunable bandgap
D’Alessandro, L., Zega, V., Ardito, R., & Corigliano, A. (2018) · Scientific Reports · doi:10.1038/s41598-018-19963-1 · Cited by 148
ZADPOOR, A. A. (2019) · Biomaterials Science · doi:10.1039/c9bm01247h · Cited by 146
Zargarian, A., Esfahanian, M., Kadkhodapour, J., & Ziaei‐Rad, S. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.11.054 · Cited by 136
Free vibration analysis of simply supported sandwich beams with lattice truss core
Lou, J., Ma, L., & Wu, L. (2012) · Materials Science and Engineering B · doi:10.1016/j.mseb.2012.02.003 · Cited by 122
Design and additive manufacturing of cellular lattice structures
Hao, L., Raymont, D. R., Yan, C.-W., Hussein, A. Y., & Young, P. (2011) · CRC Press eBooks · doi:10.1201/b11341-40 · Cited by 122
Du, Y. T., Liang, H., Xie, D., Mao, N., Zhao, J., Tian, Z., Wang, C., & Shen, L. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.121968 · Cited by 120
Optimal active cooling performance of metallic sandwich panels with prismatic cores
Valdevit, L., Pantano, A., Stone, H. A., & Evans, A. G. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2006.03.042 · Cited by 111
Mahshid, R., Hansen, H. N., & Højbjerre, K. L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.020 · Cited by 102
Non-stochastic Ti–6Al–4V foam structures with negative Poisson's ratio
Yang, L., Cormier, D., West, H., Harrysson, O. L. A., & Knowlson, K. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.08.053 · Cited by 100
Dapogny, C., Estevez, R., Faure, A., & Michailidis, G. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.09.036 · Cited by 98
Investigations on the Mechanical Response of Gradient Lattice Structures Manufactured via SLM
Sienkiewicz, J., Płatek, P., Jiang, F., Sun, X., & Rusinek, A. (2020) · Metals · doi:10.3390/met10020213 · Cited by 95
3D Texture Mapping for Rapid Manufacturing
Chen, Y. (2007) · Computer-Aided Design and Applications · doi:10.1080/16864360.2007.10738509 · Cited by 93
A Novel Design Method for Nonuniform Lattice Structures Based on Topology Optimization
Han, Y., & Lu, W. F. (2018) · Journal of Mechanical Design · doi:10.1115/1.4040546 · Cited by 93
Self-citationXiao, L., Song, W., Hu, M.-L. M., & Li, P. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138204 · Cited by 93
Cheng, L., Liang, X. Y., Belski, E., Wang, X., Sietins, J. M., Ludwick, S., & To, A. C. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4040622 · Cited by 91
Thermal Applications of Cellular Lattice Structures
Wadley, H. N. G., & Queheillalt, D. T. (2007) · Materials science forum · doi:10.4028/www.scientific.net/msf.539-543.242 · Cited by 90
Fatigue properties of a dental implant produced by electron beam melting ® (EBM)
Jamshidinia, M., Wang, L., Tong, W., Ajlouni, R., & Kovacevic, R. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.07.013 · Cited by 86
On the fatigue behavior of additive manufactured lattice structures
Zargarian, A., Esfahanian, M., Kadkhodapour, J., Ziaei-Rad, S., & Zamani, D. (2019) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2019.01.012 · Cited by 86
Configuration Optimization Design of Ti6Al4V Lattice Structure Formed by SLM
Bai, L., Zhang, J., Chen, X., Yi, C., Chen, R., & Zhang, Z. (2018) · Materials · doi:10.3390/ma11101856 · Cited by 83
Elastic modulus of 316 stainless steel lattice structure fabricated via binder jetting process
Tang, Y., Zhou, Y., Hoff, T., Garon, M., & Zhao, Y. F. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000084 · Cited by 74
Evolutionary design of nonuniform cellular structures with optimized Poisson's ratio distribution
Han, Y., & Lu, W. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.12.047 · Cited by 72
Self-citationDar, U. A., Mian, H. H., Abid, М., Topa, A., Sheikh, M. Z., & Bilal, M. M. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.101563 · Cited by 71
Mechanical properties of a hollow-cylindrical-joint honeycomb
Chen, Q., Pugno, N. M., Zhao, K. J., & Li, Z. (2013) · Composite Structures · doi:10.1016/j.compstruct.2013.10.025 · Cited by 70
The equivalent thermal conductivity of lattice core sandwich structure: A predictive model
Cheng, X., Wei, K., He, R., Pei, Y., & Fang, D. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.10.002 · Cited by 64
Podshivalov, L., Gomes, C. M., Zocca, A., Guenster, J., Bar‐Yoseph, P., & Fischer, A. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.01.049 · Cited by 63
GÖRGÜLÜARSLAN, R. M., Choi, S.-K., & Saldaña, C. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.04.011 · Cited by 60
Yang, K., Wang, J., Jia, L., Yang, G., Tang, H., & Li, Y. (2018) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2018.10.029 · Cited by 59
Takezawa, A., Koizumi, Y., & Kobashi, M. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.10.004 · Cited by 56
Design of variable thickness triply periodic surfaces for additive manufacturing
Savio, G., Meneghello, R., & Concheri, G. (2019) · Progress in Additive Manufacturing · doi:10.1007/s40964-019-00073-x · Cited by 56
Damping and low-velocity impact behavior of filled composite pyramidal lattice structures
Yin, S., Wu, L., Yang, J., Ma, L., & Nutt, S. (2013) · Journal of Composite Materials · doi:10.1177/0021998313490582 · Cited by 54
Caravaggi, P., Liverani, E., Leardini, A., et al. (2019) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34328 · Cited by 53
Mechanical performance of hollow tetrahedral truss cores
Clough, E. C., Ensberg, J., Eckel, Z. C., Ro, C. J., & Schaedler, T. A. (2016) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2016.04.006 · Cited by 50
Koizumi, Y., Okazaki, A., Chiba, A., et al. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.001 · Cited by 45
Rapid Design and Manufacture of Ultralight Cellular Materials
Brooks, W., Sutcliffe, C. J., Cantwell, W., Todd, J., & Mines, R. (2005) · doi:10.26153/tsw/7082 · Cited by 39
Salonitis, K., Chantzis, D., & Kappatos, V. A. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9528-x · Cited by 39
Reinhart, G., & Teufelhart, S. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.09.031 · Cited by 35
Optimization of lattice structures for Additive Manufacturing Technologies
Savio, G., Meneghello, R., & Concheri, G. (2016) · Lecture notes in mechanical engineering · doi:10.1007/978-3-319-45781-9_22 · Cited by 33
Modeling and simulation of relaxation in viscoelastic open cell materials and structures
Pettermann, H. E., & Hüsing, J. (2012) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2012.04.027 · Cited by 29
Do, G., Geißelbrecht, M., Schwieger, W., & Freund, H. (2019) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2019.107786 · Cited by 27
Additive Manufacturing of Heterogeneous Lattice Structures: An Experimental Exploration
Leonardi, F., Graziosi, S., Casati, R., Tamburrino, F., & Bordegoni, M. (2019) · Proceedings of the ... International Conference on Engineering Design · doi:10.1017/dsi.2019.71 · Cited by 23
Cited by
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Properties and applications of additively manufactured metallic cellular materials: A review
du Plessis, A., Razavi, N., Benedetti, M., Murchio, S., Leary, M., Watson, M., Bhate, D., & Berto, F. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100918 · Cited by 623
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
State-of-the-art of selective laser melting process: A comprehensive review
Sefene, E. M. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.04.002 · Cited by 429
Post-processing treatments to enhance additively manufactured polymeric parts: A review
Tamburrino, F., Barone, S., Paoli, A., & Razionale, A. V. (2021) · Virtual and Physical Prototyping · doi:10.1080/17452759.2021.1917039 · Cited by 119
Metadata
- Authors
- Pan, C., Han, Y., & Lu, J.
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2020-09-13
- Volume
- 10
- Issue
- 18
- Pages
- 6374
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W3085684807
- Cited by
- 640
- References
- 121
- FWCI
- 25.22
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.